Reddit Reddit reviews Watch Case Opening Ball, 2-1/2 Inches | CWR-779.00

We found 8 Reddit comments about Watch Case Opening Ball, 2-1/2 Inches | CWR-779.00. Here are the top ones, ranked by their Reddit score.

Watch Repair Tools & Kits
Clothing, Shoes & Jewelry
Shoe, Jewelry & Watch Accessories
Watch Accessories
Watch Case Opening Ball, 2-1/2 Inches | CWR-779.00
Great for opening watch casesMade in Hong KongBlue friction ballWon't leave marks on watch cases2-1/2 inches in diameter
Check price on Amazon

8 Reddit comments about Watch Case Opening Ball, 2-1/2 Inches | CWR-779.00:

u/jonathanbeaumont0 · 4 pointsr/Watches

Well I didn’t do the sapphire myself but I got most of it off amazon.
friction ball
duster
tool kit
hand tool
However if I was going to pop the sapphire i would have bought a tool off amazon.

u/HeyItsJay · 3 pointsr/Watches

I bought all my materials from Amazon and I've done about 3 Mods.

Heres a little documentation of my 1st one.

Seiko 5 Mod; PAM Cali Dial & Sword Hands & some more photos

Some things that I suggest you get before starting.

  • Magnifier Opposed to a Loupe this works well and is rather convenient with 3 magnifications

  • Precision Tweezers You need, need this. Seriously

  • Crystal Press Self explanatory

  • Dust Blower Often times you get dust on your dial while it sits, so get this to get rid of it

  • Hand Press I don't particularly like the hand remover included but it does the job just fine

  • Cushioned Holder I used this to hold the movement taking it out of the case

  • Silicone Grease Used to grease the gaskets for increased water resistance

  • Caseback Ball One of the best things you can get to be honest, it removes most casebacks

  • Movement Holder To uhh, hold the movement

  • Precision Screwdrivers You need this to unscrew the movement from the holders, also good tool to use for when you take apart movements to learn

  • Hypo Cement Used this for bezel attachments for when you change em up

    Let me know if you've any questions, I'd be willing to help you out and answer them to the best of my ability :)

    Cheers!
u/mrvarmint · 3 pointsr/Watches

>Any hints on how to pop the bezel of an Omega out?

I assume you mean caseback...

If it's a screwdown caseback and you don't have a caseback wrench, you can buy one for <10$ or try the ball of duct tape trick or you can pick up a friction ball which works almost as well as a wrench but without the danger of scratching anything

u/robemmy · 2 pointsr/Watches

Some people swear by these: https://www.amazon.com/dp/B0058EDAUA/ref=cm_sw_r_cp_apa_axPSAbW24GK3B

Otherwise try a more expensive case back wrench with more grips

u/coinman180 · 2 pointsr/Watches

Open the caseback up with either one of these or one of these I personal prefer the ball

u/mommadog325 · 1 pointr/Watches

Here's the list of all the tools I got:

Tweezers- https://www.amazon.com/gp/aw/d/B0028C9IMO?psc=1&ref=ppx_pop_mob_b_asin_title

Hand presser/lifter- https://www.amazon.com/gp/aw/d/B0748HZTMH?psc=1&ref=ppx_pop_mob_b_asin_title

Case opener- https://www.amazon.com/gp/aw/d/B0058EDAUA?psc=1&ref=ppx_pop_mob_b_asin_title

Clippers for cutting the stem- https://www.ebay.com/itm/Mini-End-Cutting-Pliers-Nippers-4-quot-Electrical-Wire-Cutter-Jewelry-Tool-Allied-/322393033884?txnId=2067048388011

Magnifyer (loupe)- https://www.amazon.com/gp/aw/d/B000LDG2HQ?psc=1&ref=ppx_pop_mob_b_asin_title

Magnifyer holder- https://www.amazon.com/gp/aw/d/B079CBLTDG?psc=1&ref=ppx_pop_mob_b_asin_title

Case cushion- https://www.amazon.com/gp/aw/d/B07GPH2M6X?psc=1&ref=ppx_pop_mob_b_asin_title

Silicone grease (for the o-ring)- https://www.amazon.com/gp/aw/d/B0058ED3MA?psc=1&ref=ppx_pop_mob_b_asin_title

Rodico (for picking up dust)- https://www.amazon.com/gp/aw/d/B008YMGYBU?psc=1&ref=ppx_pop_mob_b_asin_title

You'll also need a set of jewelers screwdrivers and files, which I already had, and some nitrile gloves or finger cots so you dont get oil and dirt from your hands onto the movement. I've also seen other people recommend getting a movement holder to hold onto the movement while you attach the dial and hands.

u/InternMan · 1 pointr/Watches

It might, try the smallest tips you have and see if it works. If it doesn't, there are also the sticky ball types of caseback openers that just use friction.

u/ShaneNickerson · 0 pointsr/WatchHorology

Go ahead and open it, take a look. Save yourself some money though and buy an 8 dollar friction ball. Works like a charm. https://www.amazon.com/Friction-Ball-Watch-Case-Opener/dp/B0058EDAUA