Reddit reviews Winco BR-9, Medium, Brown
We found 5 Reddit comments about Winco BR-9, Medium, Brown. Here are the top ones, ranked by their Reddit score.
Winco products are made to meet the high demands of a kitchenTrusted and reliableWinco products range from tabletop to kitchen utensils to food preparation suppliesWinco products are used by all foodservice and hospitality industry experts worldwideGood quality product
I use these, they work quite well
https://www.amazon.com/Winco-BR-9-Butcher-Block-Brush/dp/B003HEQZN2/ref=lp_2603745011_1_5?srs=2603745011&ie=UTF8&qid=1525104804&sr=8-5
You could try something like this:
http://www.amazon.com/gp/aw/d/B003HEQZN2/ref=mp_s_a_1_1?qid=1404593307&sr=8-1
I have one, and it certainly distances my hands from the hot iron, but it's a little aggressive for my taste. I actually haven't had any problems with my brush like yours.
The name your looking for is butcher block brush.
https://www.amazon.com/Winco-BR-9-Butcher-Block-Brush/dp/B003HEQZN2
In that case, I would suggest:
one example of tongs and scrolling pliers:
https://www.blacksmithsupply.com/Tom-Tong-Bolt-Style-Sizes-316-to-1-_p_216.html
https://www.blacksmithsupply.com/Scroll-Pleirs-3-inch-bit_p_175.html
7 ish) hand tools - I have left hand-tools off the list because you can make them yourself. You will want to look up heat treating for tools, in particular, look up drawing a temper. You can make chisels, fullers, punches, center punches, eye tools, etc. yourself. Coil spring or leaf spring is good steel for tools and usually pretty cheap to get recycled. Look up spark test, which is a way to determine if a piece of steel is tool steel (i.e. can be hardened). If you want to heat treat tools you will need to get some vermiculite and a container to hold it (used to anneal, i.e. make the steel soft) and oil (vegetable oil is fine) and a container to hold the oil.
wishlist items:
post vise - also called a leg vise. A heavy vise designed to be hammered on.
welder - a welder can make a lot of things easy, but perhaps more importantly, is really helpful when it comes to making tools, stands, tables, etc.
guillotine tool - this is a tool that holds a top and bottom die which allows you to strike the same blow on the top and bottom of a piece. These are sometimes called smithing magicians.
power hammer!
If you end up doing a lot of drilling of material that is over 1/4 or more I would suggest prioritizing a drill press. With a hand drill, it's easy to change your angle of attack which causes the bit to bind. This results in the drill spinning which can result in injury. It's not a high risk, but if you end up doing a lot of drilling, it's probably worth it. Of course, if you want to be traditional, you can punch your holes and then you don't need a drill press!
Lastly, get in the habit of checking craigslist and eBay regularly, and stopping at garage sales and flea markets. You can find hammers and files regularly, and sometimes other really nice tools for not a lot of money.
You might be surprised how stiff of a brush you can get. You can use a butcher block brush if you can find one. Here's a link