Reddit Reddit reviews Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product

We found 58 Reddit comments about Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electrical Ballasts
Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product
💡 Ready-to-use wirless electronic ballast, also available as bundle solution💡 Suitable for 12/24V RGB and RGBW luminaires💡 Controlling Features: dimming, color tone adjustment, grouping lights, saving and using predefined scenesa smartphone, tablet or PC by a web application (requires RaspBee Gateway from dresden elektronik)💡 ZigBee Light Link certified Controlling via smartphone, tablet or PC by a web application (RaspBee Gateway from dresden elektronik necessary)product, also available as bundle solution💡 Compatible with ZigBee systems like RaspBee Gateway and Philips Hue
Check price on Amazon

58 Reddit comments about Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product:

u/ambww4 · 7 pointsr/homeautomation

This ballast makes cheap LED strips integrate into your Hue setup. It works perfectly with mine. Check the Amazon comments for details. https://www.amazon.com/gp/product/B00NMSQ4QQ/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

u/sga_john_sheppard · 5 pointsr/homeautomation

You can find ZigBee controllers that you can sync with the Philips Hue bridge like this one https://www.amazon.co.uk/gp/product/B00NMSQ4QQ

Been using this with 10m of led strip, it shows up in the hue app so you can make scenes with other lights and can control it from Google or Alexa.

u/Drzapwashere · 5 pointsr/homeautomation

I am in the process of installing the LED strips and controllers below. Tested end to end setup last night and they work as expected. RGB+WW. No surprises. Also included the matching channels with diffusers.

Hope this helps!

LEDENET RGBWW LED Strip 4 Colors... https://www.amazon.com/dp/B00VIKAWWC?ref=yo_pop_ma_swf

Wireless electronic ballast... https://www.amazon.com/dp/B00NMSQ4QQ?ref=yo_pop_ma_swf

LED Aluminum Channel Wide 10-Pack... https://www.amazon.com/dp/B07FDV1RH9?ref=yo_pop_ma_swf

u/myredditworkaccount · 5 pointsr/Hue

I've not tried this myself but I think you can use this: https://www.amazon.com/dp/B00NMSQ4QQ/

u/Creoden · 4 pointsr/Hue

I've been using multiple FLS-PP along with LED strips and it works fine with the current HUE firmware, you can get one of the modules and see if it works with your LED strip, just a quick look, and it has the same plug that the 5050s LEDs I have, but the 5050s LEDS are RGB.

u/phareous · 3 pointsr/homeautomation

There is a zigbee controller that works with the hue hub. I have it and it works great, though it is difficult to connect the wires to it

https://www.amazon.com/gp/aw/d/B00NMSQ4QQ/ref=mp_s_a_1_9?ie=UTF8&qid=1503796346&sr=8-9&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Zigbee+controller

u/jamminred · 3 pointsr/Hue

I have about 30 ft worth of LED strips on my porch with my hue system. I am using the FLS-PP Zigbee controller with IP67 rated LED strips. It is in a location that wont have any direct contact with water (on porch ceiling). I put some electrical tape around the connections to help water proof it a little more though.
So far 1.5 months and no issues yet.

As for the hue branded strips, I am not sure I would put those outside because.
1 - they are expensive. 30ft of strips and the FLS-PP controller cost about the same price as the starter Lightstrip plus kit. $90 roughly. So if it does die I am not out the $400-$500?? for a comparable Hue light strip plus with enough extensions
2 - the connections are not very waterproof on the hue brand. If they will see any contact with water they will corrode I think. I will just keep those on the back of my TVs for now.

u/irrg · 3 pointsr/homeautomation

It's not CHEAP, but, cheap-er: This ballast plays well with the Hue hub (it speaks zigbee) and I've got it attached to two $12/ea rolls of LED strip from China:

https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

u/cavalier695 · 3 pointsr/Hue

They do exist but I'm not sure how popular a Hue blacklight would be.

You could create your own today if you really wanted. A simple UV light strip (https://www.amazon.com/dp/B01C2NQWIQ/) along with the DE FLS-PP controller (https://www.amazon.com/dp/B00NMSQ4QQ/) should do the trick. You'd connect the UV strip to the white channel of the controller (ignoring RGB) and Hue would see your backlight as a white bulb.

u/MobileNerd · 3 pointsr/Hue

Yes you can but you need to get an FLS-PP ballast so they can communicate with HUE. I am not sure how yours are hooked up but the 4 individual strips need to be connected to each other. You would get rid of your existing controller and power supply. The new FLS-PP ballast needs 12V run to it. You can use your current power supply if it is 12v but you would need to cut the end off it as it's directly wired to the new ballast. The only thing you would need to do is then hook the 12V-R-G-B from the RGB strip to the ballast. Should be about a 5-10 minute job. Once you hook the ballast up search for new devices in your HUE app and it will show up as 2 devices a color lamp and a white one. If you are using RGB strips then you can ignore the white lamp. If you are using RGBW stripes then you can use both.

Going this route would fully integrate you LED's with HUE. Having said that you would not be using the remote to control the loght anymore. You would be using the HUE App or Alexa if you want to use voice commands.


You can get one here : https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ/ref=sr_1_1?ie=UTF8&qid=1485270154&sr=8-1&keywords=fls-pp

u/garrettwp · 2 pointsr/homeautomation

Have a look at the FLS-PP lp by Dresden Elektronik. It is a zigbee led strip controller that will work with Philips Hue and should work with Smart Things Hub. It will work with the 505SMD led strips.

https://www.amazon.com/gp/product/B00NMSQ4QQ

u/misscourtney · 2 pointsr/homeautomation

I use the Hue hub with a generic double length LED strip, and I use this to control it.

u/Nebakanezzer · 2 pointsr/smarthome

I use this for my closet: https://www.amazon.com/gp/product/B00NMSQ4QQ/

full color and hue app recognizes it because it's zigbee. not that I need colors in my closet, but the plain white controller wasn't much cheaper, so I figured why not.

u/cartermatic · 2 pointsr/Hue

It largely depends on how much length you need. If you only need a few feet, the regular light strips from Phillips are your best bet. If you're doing long runs, it can be a lot cheaper to go 3rd party.

I ran about 30 feet for my apartment using 3rd party, and spent a little over $100. I compared it to the light strips and it would have been around $450 using just light strips. So far the integration has been super easy.

Here's what I bought:

1x FLS-PP for $55 (this is what you use to control the lights via the Hue app)

1x 12v power supply for $12

1x set of pigtails (only needed one of them, so a local AV or tech store might sell individual ones) for $5

2x 16ft SUPERNIGHT RWBWW LED Strips for $17/ea

They aren't as bright and as uniform as the Hue Lightstrips, but you get what you pay for. The Hue Lighstrips are $90 for 6.5feet, and I would have needed 5 boxes total, so $450 just for the strips.

u/Smaskifa · 2 pointsr/Hue

The Hue light strip itself seems like a gigantic waste of money to me. You can get an FLS-PP controller and 16.4' of light strip that's better than Hue (more LEDs per foot) for about the same price as one Hue light strip which only comes with 6' of light. I got a couple FLS-PP controllers on sale for $55.

u/frygod · 2 pointsr/homeautomation

I had ok luck with this.

u/Synssins · 2 pointsr/homeautomation

Or you can look at the FLS-PP IP Zigbee ballast with a power supply and any RGBW LED strip (The SuperNight LEDs are 18 bucks for 15 feet)... The ballast is recognized by Hue as a full color light.

u/powell730 · 2 pointsr/Hue

Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product https://www.amazon.com/dp/B00NMSQ4QQ/ref=cm_sw_r_cp_apa_pkivyb18HR99K

u/sloth_on_meth · 2 pointsr/googlehome

boy, have i got something to show you

Using huegasm (chrome extension), meters of generic LED strips and 2 hue bulbs, you can do the above. You do need this

u/doc4feet · 2 pointsr/Hue

If you are starting from Scratch I would look at Osram lightify garden strips. https://www.amazon.com/SYLVANIA-LIGHTIFY-Osram-Gardenspots-Adjustable/dp/B00R1PB2ZY/ref=sr_1_5?s=hi&ie=UTF8&qid=1496056371&sr=1-5&keywords=osram+lightify
They are meant for outside AND you can remove the spikes and screw them directly onto the deck ( they are designed this way)
Another solution is to get outdoor rated lightstrips and connect them with this
https://www.amazon.com/gp/product/B00NMSQ4QQ/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

It is a ballast that will connect to HUE ecosystem or actually any zigby controller. I use one of these for lightstrips in my kitchen

u/TheAdster · 2 pointsr/huelights

So I purchased another amplifier and I'm getting the same result. It seems like the amplifier is a major issue with these, so I thought about going at it another way. I was going to cut off the 1A power plug and put on a 3A power adapter that goes into the controller, but as far as I know no one has done this.

There are 2 possible issues: 1) The larger amps will fry the zigbee control board and that's that. 2) The board has some sort of limiter on it that doesn't allow the extra power to pass through to the light strips and the entire project is moot.

However, I have found a 3rd option, which is a little expensive but bypasses the Philips LightStrips completely.

I purchased one of these: http://www.amazon.com/dp/B00NMSQ4QQ/
This is, essentially, a complete replacement for the Hue controller attached to the light strips. It supports up to 10 meters of LED strip (with proper power adapter) and integrates with the Hue system so it shows up in the app just like any other bulb! The best part is you don't need to purchase a Hue LightStrip at all since it doesn't use any of those parts.

u/691175002 · 2 pointsr/Hue

You can build your own very cheaply, total cost is basically $55 for a third party controller, plus ~4$/m for chinese LED strip.

http://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

I have two dresden controllers (Running ~200W of lighting) and two lighstrip+ connected to my system and everything works fine.

The only problem is that you will never color match a third party product. The bulbs and strips will always display exactly the same color (Assuming you are within the gamut of the products) but third party can be way off.

u/redroguetech · 2 pointsr/homeautomation

For the controller, I'll be using Zigbee to connect through Hue, either a FLS-pp or one of these.

u/jacobdeane · 2 pointsr/Hue

It really depends how much effort you want to put in and if you are up for a bit of programming on a raspberry pi...

Short answer is only official hue bulbs are compatible with HomeKit.

However you can run a piece of software called homebridge on a raspberry pi that allows you to link unofficial but hue compatible bulbs to HomeKit. I have such a set up and it works perfectly!

Then you have more options with lights! I have one of these Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights https://www.amazon.co.uk/dp/B00NMSQ4QQ/ref=cm_sw_r_cp_api_cKwrzbZRGY7BG

Which can drive a lot of led strips...

u/Neochromia · 2 pointsr/battlestations

I see you mentioning Hue strips and how much they cost. Although I haven't gotten to try it for myself yet, I hear you can use generic RGB lightstrips along with an FLS-PP to get cheaper lightstrips that are still compatible with the Hue bridge.

u/duckman_1991 · 2 pointsr/smarthome

Sorry for the delayed response, I've been on vacation.

What I ended up doing was purchasing one of these https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ and planned on only using it with smartthing hub, but found the flaky connection a problem and attempted to add it to a phillips hue hub...and it worked!!

Note to reset the ballast you unplug and re-plug the device 5 times.

Overall installation is relatively straight forward.

  1. Just cut and strip wires closest to the connector to the IR side of the led strip (usually closest to the connector between the strip and IR controller).
  2. Then plug corresponding colors into the ballast.
  3. Strip connector for the IR power and plug in respectively
  4. Plug in, open hue app, find new light, if no light found reset ballast

    Second question: No you do not need a hue bulb, but you do need a hue hub
u/redheadedbandrew · 2 pointsr/Hue

You want the Wireless electronic ballast FLS-PP lp.
https://www.amazon.com/dp/B00NMSQ4QQ/

And these LED strips look good, though I haven't tried them, and they are a bit more expensive.
https://www.amazon.com/BTF-LIGHTING-Individually-Addressable-Flexible-Waterproof/dp/B01N2PC9KK

Though really any RGB or RGBW led strip should work with that ballast.

u/Ksevio · 2 pointsr/Hue

It's this thing:
https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

Basically you plug electricity and strip lights into it and it shows up as one or two lights on the hue app.

u/mrwebguy · 2 pointsr/homeautomation

OP Delivers and sorry for the delay. Thanks to /u/maxwellsearcy for reminding me!

  • Dresden electronic ballast (Zigbee)
  • 50/50 4 Conductor Light Strip Connectors
  • Phillips Hue Dimmer Switch
  • Supernight 50/50 24V lights

    Now, cut the plugs off one side of the lights and off the power supply. Match the wires up on the Dresden ballast with RGB+ on the LEDs. Carefully strip away the outer shielding on the power supply cord and then strip the tiny wires on the inside of the power supply wire. Put those into the power screw points on the Dresden. Plug it in and test. It should come on a solid color.

    Now that you have it working, go into your Hue app and scan for new lights. You will see 2 lights pop up for every Dresden ballast you configure. Once it's done scanning, click them in the app and make sure they flash. One of them will NOT flash and you can safely delete that one.

    That's it!
u/ProfessorDudee · 2 pointsr/Hue

So am I correct in assuming that instead of the 6ft Phillips Hue strip - I can get these two things and have the equivalent of a 30ft strip that still works with the Hue Bridge?

https://www.amazon.com/SUPERNIGHT-Waterproof-Flexible-600leds-Changing/dp/B00KCHRKD6

https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

u/speedyyellow · 2 pointsr/Hue

To be honest at this point it sounds like you’d be better off buying something other than Hue.

You could buy generic 5050 RGBW strips which you could cut and link as you wished from eBay for a fraction of the price of Hue strips.

Add a power supply and a zigbee controller (I have this one: Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product https://www.amazon.co.uk/dp/B00NMSQ4QQ/ref=cm_sw_r_cp_api_i_S4v4Ab9FKRZGS) and you’re sorted.

Edit: The new Ikea led driver could be an option as well, don’t know much about it though.

u/Miss_Tomato_Face · 2 pointsr/Hue

I plan on doing this or something similar to this in the future to do permanent Christmas lights on my house. I don't have all of the stuff picked out yet but I do plan on using this ballast to power the LED strips. The ballast is Hue compatible. I don't think it is waterproof but you could maybe stick it in a waterproof box. Ballast: https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

u/DjMcfilthy · 2 pointsr/hometheater

LOL awesome. Did you know that you can diy your own light strips? I got a little carried away when i discovered that ;)

u/HapaHaole13 · 1 pointr/homeautomation

In my example, I believe I would need 3 FLS-PP IP Zigbee ballasts ($55ea), 1-2 RGBW LED strips ($17ea), 3 power adaptors ($17ea), a splitter (~$15ea), and 4 ethernet cable adaptors (~$20 total). Grand total ~$268 on the conservative end + tax.

Or I could buy 3 Hue lightstrips ($90ea), splitter (~$15ea), and 4 ethernet cable adaptors (~$20 total). Grand total ~$305 + tax.

I could save ~$40 or bite the bullet and know that my current ecosystem will work seamlessly with the Hue lightstrips. Either way its not cheap but there are trade offs to going the DIY route.

Please disprove my estimates/theory, I would happily pay less for a setup with equal functionality :)

P.S. I'll add links to the items listed above but I'm on the train commuting in and the wifi sucks :/

u/bjarkef · 1 pointr/Hue

I just ordered the Dresden Electronics FSL-PP LP of amazon.co.uk along with the suggested power adaptor as well as suggested RGBW led strips.


Wireless electronic ballast FLS-PP lp: http://www.amazon.co.uk/gp/aw/d/B00NMSQ4QQ/ref=mp_s_a_1_1?qid=1453453271&sr=8-1&pi=SY200_QL40&keywords=fls-pp+lp&dpPl=1&dpID=41d%2Bw6ouySL&ref=plSrch

JnDee™ 12V 6A 6 amp 72W DC POWER Supply ADAPTER Transformer: http://www.amazon.co.uk/gp/aw/d/B0086DE6FI/ref=mp_s_a_1_2?qid=1453453271&sr=8-2&pi=SY200_QL40&keywords=fls-pp+lp&dpPl=1&dpID=51oKWAafXcL&ref=plSrch

Mixed-Gadgets RGBW LED Light Strip 16.4ft 5M Flexible Non-waterproof RGB+White 300leds: http://www.amazon.co.uk/gp/aw/d/B00PXOEOQ4/ref=mp_s_a_1_3?qid=1453453271&sr=8-3&pi=SX200_QL40&keywords=fls-pp+lp&dpPl=1&dpID=51dKMQKvKZL&ref=plSrch

I ordered a total of 10 meters of led strip, and I am anxious to see if I can drive the entire 10 meters of that one power supply. Also if it will drop in intensity at the end as well as the quality of the white light.

I can update you with my experiences when it arrives if anybody are interested?

u/atommclain · 1 pointr/huelights

I'm not sure what you mean by spliceable lights but maybe this product would fill that gap? http://www.amazon.com/gp/product/B00NMSQ4QQ

u/RustyRav · 1 pointr/Hue

Well the generation 1 light strip is cheaper http://amzn.to/2hRNdS3 and for what you want to do may be a better option.

I went the opposite where I cut off the power supply and the light strip and soldered on a larger power supply 5amp and added a 5050 light strip at 4m long seemed to work OK.

I I wanted was the ZigBee controllers.
Here is a fls after market controller http://amzn.to/2j5bQXw that will also work with the Philip hues

u/ziggie216 · 1 pointr/Hue

I haven't bought it yet nor do I know if the latest firmware had affected it. This is what was recommended to me when I was looking for the same thing: http://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ/ref=sr_1_1?ie=UTF8&qid=1448298638&sr=8-1&keywords=FLS-PP

Sadly, not a lot cheaper

u/bodiee · 1 pointr/homeautomation

Not sure if you're using Philips Hues or not, but I picked up one of these and it works with the Philips hub. You can use the cheaper light strips that you mentioned with it.
I use Smartthings and it works pretty well with that. I know it's ~$50 but you're not tied to a 6' strip of lights. Hope that helps

u/Stevebass4 · 1 pointr/amazonecho

Would something like this work?

https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

Maybe somehow tap into the tree lights

u/tanj92 · 1 pointr/Hue

No problem.

I was also looking at an alternative solution from another reddit post which would use the following items:

u/incrediboy729 · 1 pointr/HomeKit

This is the only controller that will work with Hue, and as you said, not HomeKit.

I’ve used it before and it’s not worth your time. There are no generic LED Controllers that are Homekit compatible without the use of HomeBridge.

Buy Hue. It’s worth the price.

https://www.amazon.com/dp/B00NMSQ4QQ/ref=cm_sw_r_cp_api_i_-pkODbGJC3RBB

u/mrarchey · 1 pointr/homeautomation

I have seen these mentioned from time to time. I am curious to see what others say, since I am interested in something similar.

https://smile.amazon.com/dp/B00NMSQ4QQ

u/BeeEss_BS · 1 pointr/homeautomation

I've been running one of these through a Hue hub for four years now. My light strip is just RGB, works great.

https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

u/moistpadh · 1 pointr/DIY

I'm trying to make two led light strips "smart" by having them work with my Philips hue bridge, so I've decided to get an FLS-PP controller (https://www.amazon.com/dp/B00NMSQ4QQ/ref=cm_sw_r_cp_api_mLxozbAA4DEXS), power supply, and a cheaper roll of RGBW LED's. I eventually want to connect everything to HomeKit. Since I'm routing two LED strips with different colors to the controller, I heard I need to use an amplifier (https://www.amazon.com/dp/B00MN7AFLC/ref=cm_sw_r_cp_api_aPxozbHAC56Y0). At this point I feel like I don't know how to go about connecting everything together. I know that one of the light strips is going to be about 5 feet long, and the other long enough to provide coverage alongside the edges of a 60" TV. I don't know whether each light strip/color will be able to be controlled individually or not, how many power supplies are needed, and if there's an easier/better way to go about this. If someone could give me some advice, I would really appreciate it!

TL;DR want to install two hue compatible led's on a budget, don't know best way to go about it.

u/schmebulonzak · 1 pointr/HomeImprovement


Love it! Just last week I installed rgb leds in a similar channel as part of new baseboard on the stairs, and I gotta warn you--once you're done, you'll be looking all over the house, plotting what to light up next.

I think you're right to do them in channels--especially in a kitchen, that'll be easier to keep the fancy bits dust-/moisture-/grease-free. They're really easy to work with, just use a mitre box and a hacksaw.

rosencratetc's point about adding a motion sensor is a good one. Do you have any other smart bulbs in your environment? We're using Hue's new motion sensor, and I really dig it. With that, you can do scheduling, too.... You can control generic strips with Hue by adding this ballast .

(Briefly: cut the barrel jack off the end of the power cord, strip the wires back a wee, and connect to ballast. If you go this route I can add detail & photos.)

u/Supermoves3000 · 1 pointr/Hue

I use one of these, mated to a cheap Sylvania RGB led strip:

https://www.amazon.com/Wireless-electronic-ballast-interface-certified/dp/B00NMSQ4QQ

Is that the kind of thing you're looking for?

u/atemysix · 1 pointr/homelab

Hue is nice. It has plenty of integrations, such as OpenHAB. But as you say there is the upfront cost since you need the Hue hub (which is technically Zigbee)

The hue strips are also quite expensive, but there is a 3rd party zigbee LED strip controller that works with the Hue system. I have this controller for my desk lighting. See: https://www.amazon.com/dp/B00NMSQ4QQ?ref=yo_pop_ma_swf

u/petersmoney · 1 pointr/Hue

I just installed the FLS-PP https://www.amazon.com/dp/B00NMSQ4QQ/ Works great and I haven't had the disconnection issue that some people seem to have in the reviews. I have about 20' of RGBW on the underside of my platform bed, I could probably double that if I needed to. https://imgur.com/gallery/qI4sL

u/Evostance · 1 pointr/Hue
u/adobeamd · 1 pointr/Hue

5m RGBW RGBWW 5050 Led Strip Light DC 12V 4 in 1 Led Chip Waterproof Non Waterproof 60led/m indoor outdoor home decoration
http://s.aliexpress.com/BVb2yYfQ

Wireless electronic ballast FLS-PP lp with Power PWM interface for RGBW and RGB lights (12/24V LED/LED stripes), ZigBee certified product https://www.amazon.com/dp/B00NMSQ4QQ/ref=cm_sw_r_cp_apa_uTgEyb283918T

Either go for the ip20 or ip69