Reddit reviews WizGear Universal Air Vent Magnetic Phone Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black 1 Pack

I'm just gonna go ahead and let everyone know that's a Rick roll and here's a link to an actual product:

https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_other_apa_WYjoxbC01T52J

The most invaluable thing is for you, not passengers, and that's a phone mount. I got this one and I think it's great! You need it because you need to know where you're going and easily follow directions, but you don't want to be holding your phone or looking at your lap. I did my first day (~2 hours) without the mount and then got it the next day. It was great. I'll never not use it.

For pax, I have water, mints, chocolate, and dum dums, but tbh I've been eating most of the lolipops haha! Get what you want and just be friendly. Most (not all, some people are still assholes) pax know that anything beyond a ride and friendly smile is extra and not expected.

When we travel, we will often rent a car to do some exploring. We use offline Google Maps to navigate, and this little magnetic mount to attach the phone to the car's air vent. It's really small and convenient to toss in the bag.

This will be your best friend and they make good cheap gifts.

magnet holder

I like it, however, I would like to see a back cover on bottom half to 2/3. Why? Because I have several of these:

https://www.amazon.com/gp/product/B00PGJWYJ0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

​

And it comes with a metal plate you place between your phone and case so the phone stays in place. It looks awesome in the car because there's nothing obscuring the phone. It looks like it's floating.

​

This happened on my nexus 5 and I accidentally fixed it a few months later by applying a strong, phone-safe magnet to the back from https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_1?s=wireless&ie=UTF8&qid=1479141778&sr=1-1

I searched Amazon reviews for ones that specifically mentioned Prius and ended up with this vent mount. I have it attached to the far left side of the center passenger air vent, just above the LCD screen. It works perfectly and I highly recommend it!

Yeah, something like this one. It's supposed to slide on to your car's vent. Magnetic sticker goes on the phone.

https://www.amazon.com/gp/product/B00PGJWYJ0

works like a charm...

Here you go : https://www.amazon.com/gp/product/B00PGJWYJ0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I put the metal piece you see on Amazon on the inside of my back cover. It works fine for me.

Personally I use a vent mount that is magnetic. I just have the metal plate that comes with it stuck in between the rubber and plastic layers of my otter box.

Link: WizGear Universal Air Vent Magnetic Car Mount https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_api_q294ybW6R4Y8W

Try a magnetic phone mount - no-fuss, instant connection. That way you keep your directions close to eye level as you drive drop to drop.

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_api_bDi4xbQ49Z3F6

Works great for me.

I used to use the unicorn beetle pro. The screen protector is a cheap piece of plastic which didn't sit flat on the screen and scratched easily. I actually just ripped the plastic off and used tempered glass. It is quite durable. It is a bit thicker than most cases and should provide ample protection. As for taking it off an on, it's a bit annoying, but should only take like 10-20 seconds. I'm not sure if it's from me putting my case on and taking it off, but I did notice some of the paint chipping away on the edges where the case would rub up against when putting on or taking off the case. I liked the case overall, but I use one of these https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0
I had the metal plate between the case and the phone. The case was a bit too thick, which made the magnetic mount a bit useless. I ended up switching to the Unicorn Beetle Slim and don't look back. The magnetic car mount works perfectly, and I still feel comfortable with the level of protection it provides.

I'm not sure how to link to comment on mobile, so copy paste

I'm not the same guy you originally replied to, but I got one for $7 as well and I've had it for a while. I got my sister one too and loves it. This one,

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black

I got one of those magnetic phone mounts for my car.

https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_apa_kMWhAbRCS4EA9

No moving parts on the mount, so nothing to break. Not sure if it's BIFL, but honestly I'm not sure what kind of phone mount is? In any case, I've had no problems. Small metal piece fits inside my phone case, magnet holds phone up.

Droid Turbo 2 with OtterBox Defender case.

>So you don't use a case?

I was using the adopted case, but i don't know how the case you are using compares, so trying it without the case could show if there is a difference there?

>Are phone CPUs inconsistent like regular computers? Ie some same model can tolerate more over clock and some might even get too hot regularly, bad thermal paste job or whatever. Just worried I got a kind of punky one maybe.

I don't know any specifics, but I would think they would be similar because they have similar manufacturing processes, but they should all be able to run at the rated clock speed? If you are overclocking yours that could cause the rebooting problems...

And as far as thermal paste goes, in the ifixit teardown, it looks like they just put a glob down, so yours is probably fine. Especially if your whole phone is getting hot, that means the heat is getting from the cpu to the case
https://www.ifixit.com/Teardown/Nexus+6P+Teardown/51660#s112876

>Btw do you mean your screen was constantly on?

Yes, the screen was on the whole time. And I was using a magnetic vent mount http://amzn.com/B00PGJWYJ0

This one has served particularly well for me

https://amzn.com/B00PGJWYJ0

Throw it away and get his one:


http://www.amazon.com/gp/product/B00PGJWYJ0?psc=1&redirect=true&ref_=oh_aui_search_detailpage

I used this one which was stick on, and after a few days it would fall off, due to the excessive tearing weight since the phone was being held out away from the sticking surface.

http://www.amazon.com/gp/product/B00I608BJ8?psc=1&redirect=true&ref_=oh_aui_search_detailpage

The first link is the type that sticks into a vent, and it holds amazingly well, I've never had it pull out accidentally.

https://www.amazon.com/gp/product/B00PGJWYJ0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

BIG fan of these. Inexpensive, discrete and functional. Stable. Two in my Forester, two in my Focus and had one in my F150. (Apparently I only like cars that begin with 'F')

https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_2?ie=UTF8&qid=1478664014&sr=8-2&keywords=magnet+mount+vent

i put it on my left vent.

I've got this one for my 6 Plus, it works well with the phone in Portrait. I really enjoy it.

http://www.amazon.com/WizGear-Universal-Magnetic-Swift-SnapTM-Technology/dp/B00PGJWYJ0/ref=sr_1_4?s=wireless&ie=UTF8&qid=1453242228&sr=1-4&keywords=Magnetic+phone+mount

I've got a Otterbox Commuter style case on my phone, so I stuck one of the round metal discs on the back of the case. (Also comes with rectangle ones) If I placed it more towards the middle, I'm sure I could easily place my phone in landscape.

Depending on your cars layout this magnetic mount is what I've been using for quite a while now. You slide the mount into your AC vent and there's a metal plate you place in your phone case/stick to your phone. All you do is press your phone against the mount and it holds the phone firmly.

There is this one that attaches to your dashboard instead of the AC vent.

I use this, works beautifully, you need to put a metal plate inside the case, which might not work with a real thick case though.

https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_2?ie=UTF8&qid=1494348711&sr=8-2&keywords=magnetic+vent+phone+holder

I use this for my car, works great. But its a vent attachment so its not for anywhere else, but its very solid, cheap and holds my XL.

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_apa_3Zq8ybWNNWB3N

Dude... Just get one of these.

I use this and it works really well in my 09 TSX: http://www.amazon.com/WizGear-Universal-Magnetic-Swift-SnapTM-Technology/dp/B00PGJWYJ0

Very minimal too

Taking screenshots is a horrible pain -- also there is an annoying delay, though this might just be Android? I couldn't figure out how to to change the screenshot shortcut if it is possible.

Also because the Wake button is so close to the volume knobs I'm constantly pressing the wrong one by accident.

Consider getting a magnetic car mount like this one -- http://www.amazon.com/WizGear-Universal-Magnetic-Swift-SnapTM-Technology/dp/B00PGJWYJ0/ -- and you'll be glad the headphone jack is at the bottom! The magnetic sticker fits great inside a case.

I'm using wizgear: https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_apa_37scAbYM272D3

](https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_other_awd_kibbxb6N5MXH1) I have a rain sensor on my hands to actually buy it, although it appear they only use it for you because, you know, like a little wet on top, not in the UK in 1996.

I also have a 2014 and I use This i put it on my vent, I use the bluetooth and people can hear me.

https://www.amazon.com/gp/aw/d/B00PGJWYJ0/ref=pd_aw_vtph_107_bs_tr_1?ie=UTF8&psc=1&refRID=MZQAFVJDF5DKPYM9N0NH


I see that one. Works great, phone doesn't move. My phone is in a clear case, and the magnet sits inside the case on the back.

I have the Wiz Gear version and it works great...and only $7.99 at Amazon: http://www.amazon.com/gp/aw/d/B00PGJWYJ0/ref=mp_s_a_1_1?qid=1450626097&sr=8-1&pi=SY200_QL40&keywords=wizgear&dpPl=1&dpID=4167mLTsk%2BL&ref=plSrch

I got a cheapo one from the local hardware store, just a couple of bucks, the main part is inserted into the air vents and second part is a simple metal disc that I inserted between the phone and case. I've had it a couple of years, it's small and neat and works really well IMHO.

Edit: looks very similar to this, but is unbranded and the mount part is adjustable.
https://www.amazon.com/gp/aw/d/B00PGJWYJ0/ref=mp_s_a_1_5?ie=UTF8&qid=1518105576&sr=8-5&pi=AC_SX236_SY340_QL65&keywords=magnetic+phone+car+mount&dpPl=1&dpID=51fvW%2Bc4kzL&ref=plSrch

I am using this one from Amazon, works great so far.
https://www.amazon.com/gp/product/B00PGJWYJ0/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I just use the one I got on sale from Amazon. It was maybe $5-8. My friend has a different one and they're all about the same. It's really strong and I love the setup, but every once in a while it seems I have to rotate the magnet piece clockwise, like it comes loose or something.

If you get one with a ball socket, it may be better, but then you obviously can't hide the iPhone side of the connection.

There's a bunch like this- this is a different brand but identical product.

This comes with a flat manet disc that you can put in any case.

Me too. I recommend this: WizGear Universal Air Vent Magnetic Phone Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_tai_Fkv0DbAQCZGR5

WizGear Universal Air Vent Magnetic Car Mount Holder https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_em_apa_rEvzybYX92337

I just bought this for my car-- It works really well. The magnet is extremely strong:

$7.99

https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=pd_lpo_107_bs_img_2?_encoding=UTF8&psc=1&refRID=9W01V67P4SRS4T0RRC0H

I use a phone vent mount that just slides over a vent fin, and I mounted stuck the sticky side of the metal backing to the back of the AP, it never budges unless im messing with it.

Same model as this.

You need this thing . It's saved my ass many times and is super easy to use

I use this, it blocks a vent though. I can take a picture if you like.

Thanks! We use these magnetic mounts and they've been great https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0

I'm a fan of the magnetic ones like this, though vent mount might not be suitable for some cars (my dad's F150 has weird vents it won't fit on).

But if it works, it's great to just get in the car and stick it right on the mount and not fiddle with springs or clips. You do, however, need a phone with a built in magnet (samsung galaxy's have it, perhaps others) or use it with a case (the mount ships with metal discs you stick to the inside of the phone case).

The magnetic mounts are the way to go. I use this variant in two cars and they work great in both for both my 6p and my wife's 5x:

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_apa_WxK6yb9DGRW5D

I got myself This holds the phone perfectly, lots of shit roads around me and has never slid off. Easy placing and removal.

Got one of these that I mount in the vent by the A pillar usually. If I'm using Google maps for Navi the A/C keeps the phone cool. It's easy to move around and I also use it in my work vehicle. You need a phone case to put the little metal plates in though.

I used the CD slot type in my last car but it messed the slot up so I didn't like the way it looked when it was not in the cradle. Plus I have a double DIN Pioneer now with no exposed CD slot.

Not really a cradle but they do offer that option.

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_apa_IzDzzb6PHM6QF

I stuck the metal plate inside the ZeroLemon cover and you don't even notice it.

It shows them in the picture.

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_api_0joLybYMH41HB

Magnetic car mounts are the best.

​

https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0

Ahh fellow wazer! I gotta say though, I would totally settle for Apple maps or Google maps with the car integration instead.

In my 98 I use a vent mount with a magnetic end. Amazon Link . Basically my vents are stiff and are able to hold my phone up magnetically. Magnets on the vent, metal plate between my iPhone and case. Not sure, though, if the newer circular vents can do the same.

For something a little more minimalist https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_api_myuczbNQC0H0R

I highly recommend a magnetic mount. I use this one. Actually, my whole family uses them now. It's the best mount we've tried, and we've tried a lot.

The mount is a magnet, and you'll get a magnetic sticker to attach to your phone so it sticks. I adhered the magnet sticker to my phone case, to avoid damaging the phone itself. You can just pop the phone onto the magnetic mount and pop it off. No meddling with annoying levers or clips or anything.

They also make ones that stick to your windshield, in case you don't like the vent-mount setup. :)

I appreciate the suggestion! If anyone else is interested, it’s only $8 on Amazon.

WizGear Universal Air Vent Magnetic Phone Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_api_TqBWAb11TTCMV

This phone holder for your car. Have had it since March and have had 0 issues with it. I drive a pickup as well, so it gets pretty bumpy, and this thing is solid.

WizGear Universal Air Vent Magnetic Car Mount Holder with Fast Swift-Snap Technology for Smartphones and Mini Tablets, Black https://www.amazon.com/dp/B00PGJWYJ0/ref=cm_sw_r_cp_apa_Qc4xxbS8K9D56

So bad ass to just take my phone out of my pocket and stick it there.

For the radar detector, consider hardwiring it (not difficult) and mounting it below the mirror with a mirror mount.

http://www.amazon.com/PerformancePackage-Mount-Radar-Detector-Bracket/dp/B0063N7OZ2

For the cell phone, you can use a magnetic vent clip to put the phone on one of your A/C vents
http://www.amazon.com/gp/aw/d/B00PGJWYJ0/ref=mp_s_a_1_2?qid=1464285940&sr=8-2&pi=SY200_QL40&keywords=Magnetic+phone+mount+vent&dpPl=1&dpID=41Fkv0CZk8L&ref=plSrch

I use a magnetic one, doesn't impact GPS or phone calls on my iPhone 6.
https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_3?ie=UTF8&qid=1465510456&sr=8-3&keywords=magnetic+car+mount

I use a magnetic phone mount that sits in a vent. It's quite sturdy. It comes with 3 magnets, 2 with a sticky side and 1 without. Just slip one of the magnets between your phone case and it's ready to go.

https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_4?s=wireless&ie=UTF8&qid=1472691883&sr=1-4&keywords=magnetic+car+mount

17 sti with a vent phone holder too.

https://www.amazon.com/WizGear-Universal-Swift-Snap-Technology-Smartphones/dp/B00PGJWYJ0/ref=sr_1_4?ie=UTF8&qid=1485579247&sr=8-4&keywords=vent+clip+phone+holder

that clip to be exact; works fine. I do find that spinning the clip every now and then helps with holding better