Reddit reviews Yost LV-4 Home Vise 4-1/2" (1 Pack)
We found 19 Reddit comments about Yost LV-4 Home Vise 4-1/2" (1 Pack). Here are the top ones, ranked by their Reddit score.
Home Work Shop Vise, woodworking, assembly, general maintenance.Jaw width: 4-1/2" (11.4CM) x Jaw opening: 3" (7.6CM) x Throat depth: 2.4" (6.1CM)Holds 0. 6" D to 1. 85" D pipes and tubes (1. 5CM x 4. 7CM)30, 000 PSI cast iron construction, blue power coat finishAnvil: 1. 75” x 2” (4. 4CM x 5. 1CM)Screw Diameter: 0. 6” (1. 5CM), Handle Diameter: 0. 4” (1CM) x Handle Length 6” (15. 2CM)240-Degree Swivel base allows rotating the vise for versatilitySwivel base features (4) mounting tabsProduct Dimensions and Shipping weight: 9. 5” x 4. 5” x 5. 75” (3. 7CM x 1. 8CM x 2. 3CM) and 10. 7 pounds (4. 9Kgs)Installation hardware not included: (4) bolts 3/8” x table thickness
> 4 1/2” table Vice
https://smile.amazon.com/Yost-LV4-Home-Vise-41/dp/B00YS401X0/ref=sr_1_fkmr2_2?keywords=4+1%2F2%E2%80%9D+table+Vice&qid=1565969161&s=gateway&sr=8-2-fkmr2
You can get 1 for $24 or a pack of 2 for only $100...
Could use this I reckon...
This is what I use. It didn't come with mounting hardware, so I used 3/8ths inch lag bolts and washers for extra stability (which will be less than $2 at your local hardware store).
Here you go. Better ones probably exist, but I wanted the cheapest half decent one that I could clamp to something outside to avoid making a mess and then take back inside to prevent rusting in the rain. I've had a good experience using this one at a buddy's house. Also, /u/d0nSocko mentioned that the one I bought would suck for metal (not sure why, he'll have to explain that one).
Super easy to do at home, buy the following.
Golf Grip Kit (Deluxe Grip Kit: Hook Blade, 15 Grip Tape Strips, 4 Ounce Solvent, Rubber Vise Clamp) https://www.amazon.com/dp/B079YM7Y6J/ref=cm_sw_r_cp_api_i_UXkpDb59GXSWN
Yost LV-4 Home Vise 4-1/2" (1 Pack) https://www.amazon.com/dp/B00YS401X0/ref=cm_sw_r_cp_api_i_XYkpDbWFH24EM
https://www.amazon.com/gp/aw/d/B003ISVWC6/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B01MAUZ71V/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B000GSLKIW/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B008MG7V1K/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B00YS401X0/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B001MYGLJC/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B0013RA5DQ/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B0001NA29U/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B000OQRGF2/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B004MCMCYE/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B01M0LJM8G/ref=yo_ii_img?ie=UTF8&psc=1
https://www.amazon.com/gp/aw/d/B00LICGSFU/ref=yo_ii_img?ie=UTF8
Honestly, this is what I did: I found someone giving away a bathroom sink. I gratefully accepted the bathroom sink and threw the counter top away. Then, I went and got half a sheet of 3/4 inch plywood at home depot for about $15. I put it on top of the cabinet and screwed it down. Then, I had a $15 workbench. I got a cheap Yost LV-4 for $25 with Prime shipping from Amazon and had everything set up for $40
If you want to build an AR on your own (grown man legos ftw) I suggest you build one. You can build a quality AR on the cheap. There is a barrier to entry from the tools you will need but from there on out you can use those tools for multiple builds. At a minimum you will need:
---
As for AR parts you can go pretty basic with an Anderson lower (~$45 not including paperwork). Or you can get a "better" lower that has build in ambi mag release, that tab that prevents rattling (can't remember what it's called atm), etc. The lower will last you through multiple builds. I'm still rocking the Anderson lower on this ~$4,500 build so it's definitely versatile.
From there you can also go basic with the upper, where I suggest an Aero Precision (~$65). From there you'll need a BCG, barrel, handguard, buffer tube (technical term is receiver extension), stock, pistol grip, trigger, and lower and uppers parts kits.
If you want something you can just go and shoot and don't care to modify, then buy a pre-built AR. If you want to build one to custom fit your needs then I suggest you put down the money on the tools. Best part about the tools is that you can fix and replace most issues that comes up with your or your friends ARs.
Also don't forget to buy some liquid blue and aluminium black just in case.
I have two for you; on is a vice that clamps to a table, other is bigger mounted one.
Table clamp vise; https://www.amazon.com/Irwin-Tools-Clamp-Vise-226303/dp/B0001LQY44/ref=mp_s_a_1_3?ie=UTF8&qid=1543056262&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=clamp+vise&dpPl=1&dpID=418AAZf3PPL&ref=plSrch
That's the one I own. I throw it in my bookbag sometimes lol.
Here's a bigger mounted style one;
https://www.amazon.com/Yost-LV4-Home-Vise-41/dp/B00YS401X0/ref=mp_s_a_1_1?ie=UTF8&qid=1543056333&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=vise&psc=1
I also got some nylon jaws to go over the metal jaws so I don't ruin picks
https://www.amazon.com/dp/B00YS401X0/ref=psdc_5739459011_t2_B0013E2AQY
I wish I could find stuff this cheap in the UK.
Nice vise, it reminds me of this yost clone.
This expensive one has a T-REX on the side
I dunno, man. I am at the 'a vise does what a vise does unless it doesn't' opinion until I find out otherwise.
Here's a neat one:
$25 Yost vise
$400 Yost vise
Same company put their name on both products.
This, but I regret it. Not big enough. OP has the right idea and I will probably get one of these woodworking vises in time.
https://www.amazon.com/gp/product/B00YS401X0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 (Vise)
https://www.amazon.com/gp/product/B018QNM7V2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 (Vise jaws/pads)
https://www.midwayusa.com/product/210021/wheeler-engineering-delta-series-upper-receiver-ar-15-action-vise-block-clamp (Upper receiver block clamp)
Mount the vise on a scrap piece of wood with the appropriate bolts, then use two c-clamps (Harbor Freight say wut?) to hold said piece of wood with mounted vise to your counter.
That is roughly $65, you can torque until your face turns red and you pass out or the kitchen counter rips off the cabinets. You can also order a $8.00-$20.00 lower receiver vise block and you're set. Have fun building. Cheers!
It is a Yost LV-4 and a cutting board from Ikea. I can't find it on their website but its raised about half an inch on two sides so it made mounting the vise really easy.
I waited for a sale and got a Harbor Freight torque wrench for $12, a punch set for $5, I've been using the Tapco castle nut wrench for like six years now. Holy crap, buy that upper clamshell from Midway while it's at that clearance price...all this and a good set of hex keys and some moly grease should cover the basics.
https://www.ikea.com/gb/en/products/chairs-stools-benches/step-stools-step-ladders/bekv%C3%A4m-step-stool-birch-art-30178879/
https://smile.amazon.com/dp/B00YS401X0/ref=cm_sw_r_cp_apa_i_RIAwCbWH95H3E
https://www.midwayusa.com/product/1007359056/wheeler-engineering-delta-series-upper-receiver-ar-15-action-vise-block-clamp
I bought this torque wrench for $40. It's been working fine so far. $22 on this vice. I picked up a BEV Block at GT's I think.
It's not amazing or anything, but I've been able to do everything I've needed to up to this point.
You are getting horrible advice and this thread is complete shit. Here is exactly what you need:
Vice.
Upper Vice Block.
Torque Wrench 1/2”.
Anti-Seize Grease.
Blue Loctite.
Punch Set.
Torx & Allen Set.
The reason people are recommending an armorers wrench is for the muzzle break install. Every armorers wrench has a slot designed for installing one. This isn’t mandatory because you can use a regular wrench but you might as well get one because you will need one to build a lower when installing the castle nut.
https://www.academy.com/shop/pdp/ncstar-armorers-wrench#repChildCatid=3134114
https://www.midwayusa.com/product/1019303727/ar-stoner-ar-15-roll-pin-punch-set-7-piece-steel
https://www.amazon.com/Yost-LV-4-Home-Vise-4-1/dp/B00YS401X0/ref=zg_bs_5739459011_2?_encoding=UTF8&psc=1&refRID=SJ1B9JG5TWAYKYE476FF
https://www.midwayusa.com/product/1007359056/wheeler-engineering-delta-series-upper-receiver-ar-15-action-vise-block-clamp
https://www.midwayusa.com/product/1007357996/wheeler-engineering-delta-series-multi-tool-with-torque-wrench-ar-15-steel
Does this look like everything I would need?