Reddit Reddit reviews Zoo Med Labs Digital Thermometer Humidity Gauge

We found 9 Reddit comments about Zoo Med Labs Digital Thermometer Humidity Gauge. Here are the top ones, ranked by their Reddit score.

Pet Supplies
Dog Supplies
Dog Health Supplies
Dog Thermometers
Zoo Med Labs Digital Thermometer Humidity Gauge
Digital read outQuick and easy to readWaterproof probeCountry Of Origin: China
Check price on Amazon

9 Reddit comments about Zoo Med Labs Digital Thermometer Humidity Gauge:

u/VenusAndSaturn · 3 pointsr/reptiles

I'm guessing the substrate is eco earth (thats what it appears to be), which is good... water bowl size is good although takes up quite a bit of the enclosure. The hide appears to be mostly enclosed so thats good... however theres only one hide so you'll need another one for a cool hide if you use that as a warm hide. Basically you want at least two hides, warm hide and a cool hide... and if you can fit a third one in then that would be your humid hide. I'd also recommend getting more foliage so the snake feels safer. I'd get the heat lamps out of there and get a large heat mat to go underneath the warm hide and then a thermostat to control the temperature. This is the thermostat I use, it seems to work very well.https://www.amazon.com/gp/product/B011296704/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

And then this is the heat mat I use for two of my animals, and both seem to work so far.https://www.amazon.com/gp/product/B018VQ72RI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

You'll also want to get new temperature and humidity gauges, stick on ones don't work. This is the one I use, works great so far.https://www.amazon.com/gp/product/B06XY3X7P9/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

And then if you want you can also get a temp gun, which tells you the surface temperature. I like using it a lot, and sometimes rely more on it than my temperature gauges.

As far as humidity and temperatures go, the hot spot should be about 90-95, cool side around 70-80 or so, I would make sure temps dont drop below 70. And humidity about 50%, you can boost it up to 70% during sheds but I wouldn't go over that.

If temps aren't getting where they need to be you can use a low wattage CHE, also known as a ceramic heat emitter to heat the tank as additional heat (You'll still need a heat mat).

In all honesty if you could get more substrate (bedding) you could put even more hides in. In my BP's 20 gallon she has a total of 5 hides as her substrate is filled half way so I can put hides underneath the substrate and then put cork bark to keep the substrate raised. She has probably about two humid hides, one underneath the water bowl, one on the opposite side which is a standard hide, and then underneath that in the substrate she has a warm hide which is connected to a "tunnel" system of cork bark. https://imgur.com/a/h6ERs6Y

u/Montagge · 3 pointsr/BeardedDragons

Lettuce isn't good for him. Collard greens, mustard greens, or turnip greens are all better. Broccoli is not a good staple food. Here's a chart for you to use as reference: http://www.beautifuldragons.com/Nutritionframeset.html

What kind of bugs? Do you have calcium powder?

You should get some thermometers for the tank, preferably digital, to monitor hot/basking side and the cool side. Too hot and he dehydrates, too cool and he can't digest food properly.

u/sarahlu82 · 2 pointsr/snakes

I would definitely get your temps and humidity sorted out as your highest priority. Especially if your heating pad isn't currently on a thermostat, it can be way too hot. When you get the thermostat for the heat pad, you should carefully peel the heat pad off the bottom of the tank (carefully because it can tear if you rip it off too hard) and sandwich the thermostat probe between the heat pad and the underside of the tank (so both heat pad and thermostat will be outside the tank, stuck to the bottom.

To monitor the temp/humidity in the enclosure, these digital thermos/hygros are much better than the analog ones: https://www.amazon.com/Zoo-Med-Digital-Thermometer-Humidity/dp/B06XY3X7P9 - they also have these at most PetSmarts/Petcos.

I see that someone in the ball pythons sub linked you to their getting started FAQ, so you should have all the info there you need about what the temps and humidity should be at. You can spray for humidity, but that causes large spikes and drops in the humidity levels and you can end up spraying 2-3x per day. More ideal since you're using cypress mulch bedding is just to mix some water right into the bedding. What I do is wait for my guy to go into one of the hides, then use a tupperware lid to block the entrance to the hide so he doesn't think my hand moving around the tank is a mouse and come out to eat, and mix some water into the bedding. You can pour a cup or so of water all over the bedding (maybe more since you have a 75 gal tank - I use a cup for my 40 gal) and use your hands to mix it all around. That will keep the humidity at a high level for much longer than spraying. You can also cover most of the screen top to keep the humidity from escaping, especially if you live in a drier climate. I live in Maine, so at this time of year humidity is a constant struggle. For now you can just cover most of the top screen with tin foil (leave some uncovered for ventilation). When you have time you can follow this tutorial to make your top screen even better at holding in humidity: https://ball-pythons.net/forums/showthread.php?90187-Tank-Screen-Top-Foil-Treatment-Tutorial but that's not a priority at the moment.

Keep asking questions! Even though you have some more to do to make your setup ideal for him, I can tell you care so much about giving him a good life <3

u/dazzleduck · 2 pointsr/hermitcrabs

You do not need the tank liner. The heating pad goes on the outside along the BACK of your tank, not under. The goal is to heat the air. If you put it under you will cook the crabs, heating pads often get much too hot (even with reptiles you need to use a thermostat to keep it from overheating and burning your reptile).

For humidity, I am going to link you a thermometer/hydrometer that I use. You will be able to easily see what both are at with just a glance and then make adjustments as needed. You can find a good one here

If you want one that has probes that goes into the tank and the display is outside, check out this one. Make sure that the probes are out of reach of the crabs, but as close to ground level in the tank as possible.



As for keeping humidity up, moss is a great option. You can mix it into your sand, place piles of it on top of the sand, or use a suction cup shower caddy on the glass and fill it up with the moss. Specifically, you want sphagnum moss which you can find in reptile sections. You can mist it and it will stay wet for a few days. Another thing you can add are bubblers, the same kind you would use in an aquarium. Adding them to your pools creates water movement which will not only increase humidity but attract your crabs to the water and deliver oxygen into the tank. With the proper substrate mixture and the heating pad, you should meet the parameters you need. But sometimes it just doesn't happen, and then you can try adding moss and/or bubblers. I have both and my humidity stays perfect.
You're awesome for getting started on their new stuff right away. They are such a rewarding pet, and I bet you will notice a huge difference in their activity once you have it all set up!

u/ohmygobblesnot · 2 pointsr/ballpython

Get digital temp amd humidity gauges. The analog ones are known to be highly inaccurate which could lead to you not knowing of a problem inside your bps enclosure. Ill list some more accurate temp/humidity gauges i use for all my animals/know work far better than analog gauges.

(These two links are for direct spots) https://www.amazon.com/Zoo-Med-Digital-Thermometer-Humidity/dp/B06XY3X7P9/ref=sxin_2_ac_m_rm?ac_md=0-0-ZGlnaXRhbCByZXB0aWxlIHRoZXJtb21ldGVy-ac_d_rm&keywords=digital+reptile+thermometer&pd_rd_i=B06XY3X7P9&pd_rd_r=f1b30844-5547-49df-95ff-ba0aac3561f2&pd_rd_w=Uchs0&pd_rd_wg=guzkL&pf_rd_p=d1a6ea92-24ed-409e-8e33-97dc5a8de815&pf_rd_r=TGRYA2JMNKC4SK449XXH&qid=1569166473&s=gateway&sprefix=digitalreptile++thermometer

https://www.amazon.com/gp/aw/d/B07RBPV8Q4/ref=sspa_mw_detail_0?ie=UTF8&psc=1

(I use this one to make sure my heatmat regulartor thing is accurate) https://www.amazon.com/Etekcity-Lasergrip-774-Non-contact-Thermometer/dp/B00837ZGRY/ref=sxin_2_osp129-ac57b3ab_cov?ascsubtag=ac57b3ab-bed4-443b-8488-8e105122ba5b&creativeASIN=B00837ZGRY&cv_ct_id=amzn1.osp.ac57b3ab-bed4-443b-8488-8e105122ba5b&cv_ct_pg=search&cv_ct_wn=osp-search&keywords=digital+thermometer&linkCode=oas&pd_rd_i=B00837ZGRY&pd_rd_r=89005af9-9dd9-4e80-a240-605a60d3d510&pd_rd_w=t3SHd&pd_rd_wg=c1tkV&pf_rd_p=33b90d57-4392-4d9b-9557-da4c9de25645&pf_rd_r=AZDN5TXKRQHMD5KGXTCN&qid=1569166451&s=gateway&sprefix=digital+&tag=thedrive09-20

(This one is for the middle or get two for each side as this one has worked the best to see the overall temp/humidity in the enclosures for my bp and crested) geckohttps://www.amazon.com/dp/B01H1R0K68/?coliid=I2O5Q9VJY092E6&colid=2MBRCC0QH2E8J&psc=1&ref_=lv_ov_lig_dp_it

Edit: also whats your overal humidity in the room you're keeping the tank cause the cypress might be soaking up in moosture in the air which is causing your enclosure to be so high. I do still suggest you change to digital but it still might be helpful to know if your bedroom is the problem.

u/kittio · 1 pointr/snakes

Heya! It's me from your thread on /r/cornsnakes~

I wanted to add on to what Jon suggested: combo gauges are awesome for measuring ambient temperature and humidity, you can use wire clips to make them neat n' tidy. I'd also grab a thermometer gun to measure specifics if you don't already have one. They're great for comparing the warm/cool ends and preparing food at the right temperature. Here are the ones I use!

(Amazon) Zoo Med Labs Digital Thermometer Humidity Gauge

(Amazon) Etekcity Digital Laser Infrared Thermometer Temperature Gun

u/riehf · 1 pointr/ballpython

Substrate that holds humidity well

(2 Pack) Zoo Med Eco Earth Bricks https://www.amazon.com/dp/B01MUGYCL0?ref=ppx_pop_mob_ap_share

Heat pad

Zoo Med ReptiTherm Under Tank... https://www.amazon.com/dp/B0002AQCKA?ref=ppx_pop_mob_ap_share

Heat mat thermostat and controller

BoHoFarm Heat Mat Thermostat... https://www.amazon.com/dp/B07LBGWMV9?ref=ppx_pop_mob_ap_share

Thermometer and humidity gauge

Zoo Med Labs Digital Thermometer... https://www.amazon.com/dp/B06XY3X7P9?ref=ppx_pop_mob_ap_share

Make sure you read the instructions on every item, but these will allow you to create the best habitat for your ball python :).
Remember that a water bowl and at least one hide that is placed over the hot spot are needed as well. They’re not climbing snakes so something for them to climb isn’t necessary, but isn’t a bad idea for exercise and aesthetics. Let me know if you have any other questions!!

u/bitchnstitch · 1 pointr/Sneks

We use this one for the heat pad, you set it at the temp you want and it turns the heating pad on and off depending on if it gets too cool or too hot.

And then we use this one just to monitor visually the temp and humidity of the environment. So far we’ve had no issues and they’re both fairly inexpensive.

Good luck with everything!