Best adjustable wrenches according to redditors
We found 234 Reddit comments discussing the best adjustable wrenches. We ranked the 126 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 234 Reddit comments discussing the best adjustable wrenches. We ranked the 126 resulting products by number of redditors who mentioned them. Here are the top 20.
Spent a long ass time looking for everything. Here's everything I found on the first go. Will give it one more shot to find anything I missed:
Sounds to me like you need a thumb detecting nut fucker.
https://m.imgur.com/gallery/906V3
Only $50 for a good one.
https://www.amazon.com/Proferred-T10001-Mining-Adjustable-Wrench/dp/B016OK8S58
Father here, came to say this. Not everybody has mechanical skills, so here's what you need.
Not only will your kid be safer, the bike will last longer and you will be a better person for having learned this trick.
Hey! Amazon sells them so you can fuck your own nuts in the privacy of home.
They're locking pin stops. I've never seen them used this way before, usually they go on the metal post on the back of enamel pins, to keep them from falling off of whatever you're pinning them to. Just bought a bunch of them, here's the link
Mine are Stanley brand from Amazon, and Sears sells a Craftsman model that appears to be similar. Obviously these are both US sellers but I'd think they're also available in Europe either under one of those brands or another.
https://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
Amazon
But you can't have it.
See the name on it?
It says it's mine!
So please mail it to me after you purchase.
Here's what I would personally recommend for a decent minimum starter set, assuming you're just looking for general homeowner/handywork tools:
Those are all solid quality tools that I've personally used in the past. There's obviously tons of other stuff you'll need along the way if you're into fixing things but that's a great starting point.
I think these work better.
https://www.amazon.com/dp/B01NAP6FQJ/ref=cm_sw_r_cp_apa_i_d7b5AbMFGEW84
It is a basin wrench
Buy this grease:
White lightning grease
Buy this general lubricant:
Triflow
Buy this multi-tool:
Alien II It includes all common allen and wrench sizes, a chain breaker, and spoke wrench.
Buy this socket set:
Ice tools 8 x 9 x 10
Get this adjustable wrench:
Wrench
Buy these tire levers:
Park tool levers
With all of that you should have more than enough to do basic maintenance with under $80 worth of tools.
As you get more skilled, you'll need some specialized tools for the bottom brackets, headsets, and cones on your wheels but those will vary by type/bike, and in time you will own multiple bikes so buy the tools when you when you need them.
Mine are the Stanley model; they work the same way but they have a lever that unlocks them like a pair of vise-grips. I think they're a little quicker/easier to use one-handed than the ones in the OP's picture, but the function should be the same.
Edit: here ya go.
I work on semis and do filters a lot. Best tool I have found to remove them is a strap wrench. Titan Tools 21315 12" Strap Wrench https://www.amazon.com/dp/B00TU3UNW8/ref=cm_sw_r_cp_api_i_7bUEDb9P85QJ5
Not a dealership lube tech but I'm a C tech in a independent shop. Get yourself a claw style oil filter socket and a torx bit set up to t-60 if lube techs do diff services in your dealership. Subarus are pretty easy to do maintenance on since you really only need a 8mm, 10mm, 12mm, 13mm, 16mm, and 17mm wrench/socket set to do most things.
I've had a few of these over the years.
>Just go back with a hammer and big Crescent wrench, pound them in and crank them down
If you're looking for a combination nut-fucker/thumb-detector for your wrenching and hammering needs: https://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
Hey, girl. I have colitis too (ischemic). I hear you on the bathroom thing. Boy, do I ever.
Might want to get yourself one of these. They're easy to install, all you need is an adjustable wrench and a flat head screwdriver. Even if you're not particularly handy, this is seriously easy. And worth it, holy cow, SO WORTH IT.
The first time you try it will be a shock because the water's not warmed up at all, but you get used to it, and after a flare-up, that cold water is a blessing. Very soothing. Stops me from shaking after I explode and am draped there, wrung out and weak.
Or buy the non-polished Bahco for two thirds the price
https://www.amazon.com/Bahco-9029C-Chrome-Adjustable-Wrench/dp/B0007WGJZQ
Or half price if you want a flat black version.
https://www.amazon.com/Bahco-9029-US-6-Inch-Adjustable/dp/B0012Y2BEG/
I think this craftsman one is a little more well made. I picked it up after stripping my plastic filter socket. It's like $12.99 if you get it from Sears
https://www.amazon.com/Craftsman-Oil-Filter-Wrench-Auto-Adjustable/dp/B003Y22RDO
Here's an old post I had from /r/homeimprovement regarding a new home, hope it helps.
I'm sure there's more, but it's midnight and I'm sleepy.
https://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
or this: https://www.acklandsgrainger.com/en/product/WRENCH-MINERS-HAMMER-HEAD/_/R-RASRS12H
same as AvE
The Stanley version is very well rated.
https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ/ref=sr_1_2?s=hi&ie=UTF8&qid=1509832400&sr=1-2&keywords=Locking+Adjustable+Wrench&dpID=41s-XgSjppL&preST=_SX300_QL70_&dpSrc=srch
Pin Keepers Locking Pinkeepers Back With Wrench Biker VERY HIGH QUALITY LOW SHIP https://www.amazon.com/dp/B007WMYS8Y/ref=cm_sw_r_cp_apap_2BWEyqmSPRtFX
The cost of a plumber got me thinking about a specific tool, a basin wrench , that basically makes it a bazillion times easier (and cheaper) to tighten the big awkward nut that attaches the base of your sink doohickies to the underside of your sink/kitchen counter. Probably a lot of tools out there that make diy repairs a lot easier.
If you have about $60 you could just buy them and have some tools that will serve you well as a renter and then you could help out your friends (and maybe get free beers or food off them).
I think you mean a stud finder.
https://www.amazon.com/CH-Hanson-03040-Magnetic-Finder/dp/B000IKK0OI/
It's less than ten bucks.
An adjustable wrench is about the same price.
https://www.amazon.com/TEKTON-23002-6-Inch-Adjustable-Wrench/dp/B00FFUPS98/
For a cordless rechargeable you're talking about $40 for this one.
https://www.amazon.com/Cordless-Variable-Position-Masterworks-MW316/dp/B07CR1GPBQ/
I know you said borrow, but if you're renting it's good to have some basic tools for stuff like this and it's an investment to be honest. If you honestly can't get anyone to help, I already have the stud finder (metal detector), and wrench. It would be an excuse for me to finally get a drill. Let me know if nothing else works out.
This thing is magical. Tons of uses you didn't know you needed it for. You won't use it every day, but when you do use it, you'll wonder how you got by without it.
https://www.amazon.ca/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
Bahco is owned by Snap On, btw. These are virtually identical to these
https://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
Maybe a strap wrench.
Here is the desktop version of your link
You mean like this? https://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
You've got the wrench positioned on what you need to turn, but you need a longer-handle wrench. And you'll need to loosen both sides. Fitting a wrench on on the drive side might be tricky--you'd want a thin wrench to fit in there, or maybe you can take the gear shift mechanism off to get it out of they way. A basic open-ended wrench might fit. And adjustable wrench is less likely to fit, but might, especially a slim jaw one.
But that chain looks shot. I would go ahead and replace it. A single speed chain is cheap. You could even spring for a KMC "rustbuster" chain and be less likely to have this problem in the future. Regular lubing of the chain would also help avoid it in the future.
What you really need is a thumb detecting nut fucker:
https://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
get an adjustable wrench. I used one for the longest time before I got a skate tool. grips really well if you tighten it.
I think I'll need to buy a faucet wrench. Do you happen to know the difference between this one and this one?
I like the channel lock wide azz or even just the normal non wide azz ones if you need bigger than 8 inches. they are made in Spain by Irega and I have never had any issues with them.
I would make the following recommendations before resorting to welding or drilling out, or any method with a higher chance of causing damage to other parts of the motorcycle.
Edit: I looked at the picture and realize you didn't mean you ruonded off the top of the bolt, you mean that you snapped off the head. My advice below is for rounded off nuts and advice on the hex-key oil bolts. You can ignore it as your issue is a sheared off head.
Think of when you change your car oil filter. The oil filter wrench -- how does hit work? It tightens up and gets a better grip as you turn. Now think of your open-end wrench, especially if you don't have one that's a correct fit -- it grabs only two of the thin bolt head edges, and pushes on the thin tips. The worse fit your wrench is to the bolt, the finer the edge of the tip it's going to grab--and smear. Use the open end wrench ONLY as a last resort.
Get either a Loggerhead Tools Bionic Wrench or a Sears Max Axxess wrench version. Squeeze on the nut and turn. As you turn, it bites down harder. This is better than vice grips that bite once, then use small teeth like a metal file if they slip.
Note: There is a controversy, I recommend supporting buying the American Inventor tool, Loggerhead, and not Sears
Consider using a Gator Grip socket.
If any of the above give you a problem, use a hand file or a dremel to put some more solid edges on your bolt for them to grip.
Final tips: The stock bolts are fine. Get a correct fitting, box-end wrench, or a six-sided socket, and you will never have a problem (unless you smear it on a rock). There is nothing wrong with the hex key drain plugs, but note you're using a reverse box-end wrench (a six-point "bolt head") to stick into the hole. And if somehting goes wrong, you have less surface area in the hex hole to apply force to for removing them -- you'll be filing flat edges on that round bolt head so you can get one of the above tools to bite on it. Plus you'll have to carry an extra tool vs the Eagle Mike low profile that's the same bolt head size (I believe).
The hex-key fix is an "I don't know how to use tools so I get one that was dummy proofed for me" tip. The equivalent to using a box end wrench on a bolt, would be using a standard/slotted screwdriver to tighten/loosen your hex keys.
the wrong tool for any job!
this on the other hand, is a good tool when you can't find the goddamn 1/2" socket...why does the 1/2" always go missing? every socket set should come with 3 of them.
I'm okay with this one.
Never used this but it says the small one goes down to 3/8 inch http://www.amazon.com/gp/aw/d/B003UDS83U/ref=mp_s_a_1_2?qid=1459413404&sr=8-2&pi=SY200_QL40&keywords=mini+strap+wrench&dpPl=1&dpID=41tQIsSyiXL&ref=plSrch
Wideazz is very nice. I tend to grab knipex plier wrench more though.
http://www.amazon.com/Pin-Keepers-Locking-Pinkeepers-QUALITY/dp/B007WMYS8Y/ref=lp_9195529011_1_1?srs=9195529011&ie=UTF8&qid=1457704062&sr=8-1
These are awesome.
Havent lost one yet, even going through washer and dryer.
Related question are the locking ones any good ? Link www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
I'm 28, in the Navy, and here's what I'm usually carrying.
Maxpedition Pocket Organizer
NM Flag patch
Old coin given to me a while ago
Sparrow's Tuxedo Pick Set It's a great set, and a cool thing to learn. The linked set has a different case, I guess they don't do the leather cases anymore. I also had them put rubber handles on mine when I ordered, makes all the difference.
USB cord that came with my phone
Tekton 4" adjustable wrench
Zebra pen. Forgot which specific one...you probably know it though, it's one of the popular choices on this sub. My main pen I keep in my breast pocket, the Fisher Bullet. That's the best pen I've ever had, hands down.
Fine point Sharpie
Rite in the Rain notebook. It's ok. I much prefer Field Notes Expedition which I also keep in mind that breast pocket. Just wish the pages were perforated.
Streamlight Microstream. Awesome little light, and the AAA battery it takes lasts quite a while.
Chapstick
ThermoWorks surface thermometer. Sorry, can't find a link. My buddy gave me this last Christmas. Comes in real handy in the field, to see if my JetBoil is too hot to put away. Also, I dunno, I can tell you if stuff is hot or cold or whatever. Neat.
Proferred T10001 Mining Adjustable Wrench with Hammer, Chrome Finish, 12" https://www.amazon.com/dp/B016OK8S58/ref=cm_sw_r_cp_apa_f9XJBb7PCGVAM
EDIT: About the stand - There are many cheaper options but go with Feedback sports. The clamp by screw is far better than quick-release. Also cheap stands are really cheap while Feedback Sport's stand is all metal and very solid. Don't skimp on the stand.
Link!
Happy Zambambo!
Well, sir, obviously youre doing it wrong. http://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
Fluval sells this simple kit. It does get expensive replacing their specialized cartridges, but it's a good place to start if you're only ready to get your toes wet.
If you want to go bigger, it'll cost more upfront, but is cheaper to maintain.
Amazon Shopping list for CO2 under $200:
Cheap Regulator. There are better/nicer/higher quality ones out there. This one is cheap and okay.
Drop Checker
Diffuser
Check Valve
CO2 tubing
Thread tape
Adjustable wrench
5lb cylinder less than $15 to fill at gas supply store
interesting. reminds me of this thing i picked up in an Ace a few weeks ago: http://www.amazon.com/Crescent-ATR28-8-Inch-Ratcheting-Adjustable/dp/B008NM6VIC
granted you have to manually adjust the mouth opening but that allows for a greater range of possible nut sizes. OPs would be really good if you find yourself having to adjust a lot of nuts that have only a small difference in size.
Here is a good ranking of all they types of wrenches out there
I have owned one in the 10+ years of doing live shows and events, and I still use my basic c-wrench. I find that it is too long, so it does not sit in my chalk bag/back pocket all that well. And is only good if the show I am loading in is all conventional with standard C-clamps.
I do too many shows that use mega clamps, or cheeseboros on their instruments/pipes. So instead of me having to carry a c-wrench in addition to the lighting wrench, I just skip the lighting wrench.
I do carry the small combo wrench for focus. And that does the job nicely.
Another note. The light speed wrench tends to cause FNG's to wrench to hard down on a c-clamp. Causing them to dig in and damage aluminum truss cords.
My friend that works at a (really good) local shop has used this style for years. I have used it when I did an oil change or three for him when when I was bored and hanging out at his shop
http://www.amazon.com/Craftsman-Oil-Filter-Wrench-Auto-Adjustable/dp/B003Y22RDO/ref=sr_1_1?ie=UTF8&qid=1396473414&sr=8-1&keywords=B003Y22RDO
It works VERY well on a range of filter sizes.
Edit - dangit now that I look at that link carefully, it is that style but probably a different brand
Adjustable wrenches have some perfectly valid uses. Holding the backside nut of a bolt your are tightening, for example - nice low torque use case. Also great for certain uses in bicycle repair (gripping freewheel removal tools and such).
If you want one that can handle some real torque, try this one. https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
The problem comes in that there's lots of jobs they are NOT suitable for.
I posted something similar a while ago, you might find some more information there. Basically it's supposed to work very well with rusty and already fucked nuts and also double as vise grips in a pinch (pun not intended)
Here's a Stanley one on Amazon.
Take the strap off a small strap wrench and just wrap it around the bell to hold it tight while you loosen the nut
http://amzn.com/B003UDS83U
I had this problem with my nylock a while back and asked the same question...nylock's are very tight the first few times.
Here is a tuning kit
> do the weights matter if I get some stage six one or some generic ones
Unless you are racing a decent set (of 6) is probably $10 or you can go fancy and get $15 ones. NCY weights are more like $20 but I'd consider that high end fancy schmancy.
It's worth noting that your weights should be inspected/changed every 1000 or so miles anyway, so if you bought used it would probably be good to go ahead and change them. Here is a very good GY6 service manual too BTW
You will likely also (arguably) need a torque wrench for reassembling the transmission and a clutch holder. If you don't have these you can get by using other methods or a strap wrench
Its worth noting there are also sliders that you can use instead of rollers. If it makes any difference probably has to do with the slope in your variator and the design of the slider. There are many, many different combinations.
I found one source that says:
> "for every .5 grams heavier , it seems as if you loose about 250 rpms or so. Maybe a little less. "
but I cannot say if that is accurate or not.
You might also be able to change your variator to get a little bit more difference as well. As with changing weights its something some people seem to swear by and others say does nothing. Either way companies like NCY make nice parts that may be lighter and generate less/dissapate more heat, last longer, and offer a smoother ride than stock parts. If you go this route you can usually do it one piece at a time.
I'm still pretty new to all this though :-O so by all means if someone sees I said something inaccurate let me know!
He needs a locking crescent wrench!
https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
What separates this product from one like this?
Here's a 4-inch wrench for $5.49. Those stick figures are just tiny.
For UK people, you can also get this on Amazon:
https://www.amazon.co.uk/gp/product/B01LZ7V2A4/
Here's it for £12 (for anyone else)
https://www.amazon.co.uk/gp/product/B01LZ7V2A4/
I treated myself to a 6" Bahco Ergo wrench: http://www.amazon.ca/gp/aw/d/B0012Y2BEG and it's great. Highly recommended.
And get a 6". Anyone caught using an 8" in my venue can expect a severely rapped set of knuckles,
I should have mentioned this: if you are thinking of trying to fit a bike in your car. Carry two adjustable wrenches. Reason is in case they are riding without quick release. Also, put the chain in a plastic bag so the grease doesn't get everywhere. If they can take off/on the wheels the better but if they can't, you may need to put the wheels on/off. Quick tutorial for freewheel. Quick tutorial for fixed, I don't particularly like this video since the guy didn't have a horizontal dropout but it is the closest I could find. You could also get a rear bike rack for your car in my experience the Saris is pretty reliable but it is fairly expensive this one is $80. They are some that are cheaper but I have had one bad experience with a cheap bike rack and since you are hauling people it would probably not be a good idea if the bike rack were to fail. I hope this helps.
A faucet wrench will make tightening the faucet to the shank much easier, they're not very expensive at all. Also, keep in mind the circular cover goes between the faucet and the shank.
http://www.amazon.com/gp/aw/d/B00GP23OY6/ref=mp_s_a_1_2?qid=1420301540&sr=8-2&dpPl=1&dpID=21IOycdj5IL&ref=plSrch&pi=AC_SX200_QL40
Not particularly. For your needs make sure it will do both filters. Measure the diameter etc. Something like This is just fine.
A few tips I didn't see already listed:
They sell pin keepers for a more secure alternative to the butterfly clutch for pin backs. I see them in biker gear stores all the time to keep pins securely fastened to biker leather vests.
Also Amazon http://www.amazon.com/Pin-Keepers-Locking-Pinkeepers-QUALITY/dp/B007WMYS8Y
This one: TEKTON 23001 4-Inch Adjustable Wrench https://www.amazon.ca/dp/B000NPR438/ref=cm_sw_r_cp_api_i_Yb01BbXSJ2HFQ
I hadn't thought of that! The spindle and the plastic thing came right out, but I still don't see how to get the bearings out. Doesn't seem like there's anything to grab.
Here's the best photo I could get: https://photos.google.com/photo/AF1QipPeSZ6aTxUmpD4i2oxJEBpGNujdhnTWNVsjZoM6
You really think it'll come out? I was oing to order this: https://www.amazon.com/Channellock-8WCB-WideAzz-Adjustable-Opening/dp/B001I70C34?crid=1FA0967YL9CAD&keywords=adjustable+wrench&qid=1540757299&sprefix=adjustable+wren%2Caps%2C177&sr=8-18&ref=sr_1_18
I use something like this
Draft Warehouse Standard Faucet Wrench with Vynil Grip - Heavy Duty https://www.amazon.com/dp/B00829HKFE/ref=cm_sw_r_cp_api_i_6b2ACbGSBVVYF
How about using an Oil Filter wrench to improve your grip on your existing chuck?
As a bonus you can use these for a wide range of other applications in the shop as well, and the linked version comes in urine yellow so it will match your DeWalt.
Here's one on Scumazon. A quick search wasn't able to find anything on Hazard Fraught, but I'd be very surprised if they didn't have one
These are majestic Penn Elcom CN01: Delux Cage Nut Tool https://www.amazon.co.uk/dp/B01LZ7V2A4/ref=cm_sw_r_cp_apa_i_g4p6Cb5RGTMHS
I got mine from Princess Auto, which is a Canadian chain something like Harbour Freight. They have a surplus section where all kinds of neat things show up from time to time.
Stanley makes one with a conventional handle. A spud makes using a cheater easier, but at least Stanleys don't have a bulb at the handle end.
These are my two uncommon but frequently used tools, This guy cause I hate carrying around tons of nut drivers https://www.amazon.com/Driver-NutDriver-Klein-Tools-32800/dp/B01I0QVP18
And this one because I do a lot of bucket truck work and often need to use an adjustable but they get loose and sometimes dropped.
https://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ/ref=sr_1_5?ie=UTF8&qid=1549061734&sr=8-5&keywords=locking+adjustable+wrench
This thing is great for holding a nut behind something .
http://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
Next time, use a rubber strap wrench, like this one.
https://www.amazon.com/dp/B003UDS83U/
Why do you recommend the socket type over the open jaw/telescoping type?
https://www.amazon.com/Superior-Tool-Eleven-Wrench-Infinitely-Adjustable/dp/B0000CBJD4
Much better. The rest of your stuff looks pretty well chosen.
How long is that adjustable wrench? It looks big and heavy. I'd recommend a 6" one: https://www.amazon.ca/TEKTON-23002-6-Inch-Adjustable-Wrench/dp/B00FFUPS98
I'd also recommend a compressible down jacket if you don't have one already. They add a lot of warmth without much weight.
What kind of experience are you guys coming into this with?
Do you have mentors/are you yourselves familiar with the use and safety precautions necessary around power tools?
What kind of space are you in? Do you have a dedicated space to use or do you need to move things in and out of an area every meeting?
How much do you want to learn? Are you planning on using primarily Matrix/Tetrix this season or do you want to do custom fabrication?
If you're planning on using chain, I'd recommend getting at least one of these (Dark Soul #25 chain tool). You won't need to use master links again, and they're just in general great to have around.
I would definitely recommend getting Anderson Powerpole tools and items. Definitely get a TriCrimp and associated wire, connectors, and contacts, if you don't have them already.
I'd also recommend a few tools that come in useful just in general when it comes to FTC-- a good adjustable wrench is good to have around, whether you're doing custom or not. A ratcheting screwdriver is also good to have around, in addition to more standard versions. I'd also recommend my personal favorite allen wrenches (you can get just metric or standard sets, but I linked the paired version). For taking care of stuck bolts or anything else stuck, a good pair of locking pliers are also great. Also getting some good pliers for all your electrical needs is a good idea. Also extremely useful is a good square. On a similar note, a level is good for checking whether you actually bolted that part on straight.
You should also get a general set of combo wrenches and some of the specific sizes most common for FTC. Pretty much any reputable brand is fine for this-- don't spend more than about $50 for a set and $10 for an individual wrench (honestly, that would be super high, you should probably target half of that). A decent ratchet set is also good, but not absolutely essential.
Other good things to have around are a heat gun or heat bar (for doing custom plastic parts for your robot). You can do some great stuff with some creativity and some sheet polycarbonate.
To go with that, a vinyl cutter is great for doing sponsor decals and general cool stuff.
As far as "essentials" go, that depends on where you want to go. If you want to do lots of custom work-- or use something like 80/20, then you'll want some other tools to do that work. A good power drill is absolutely essential, and if you have the space, I'd definitely recommend getting a solid miter saw and an aluminum cutting blade (I know some people consider them too dangerous, but with proper safety training and precautions, I've never had a student or mentor get injured with one).
As far as materials for doing custom work go, I'd recommend getting some box aluminum (1x1 and 1x2) tubing, 1/8" and 1/16" polycarbonate (I'm partial to the dark tinted stuff, but it's a bit more expensive), and a full assortment of #6 and maybe #8 hardware. You'll also want some M3 screws for face mounting AndyMark and REV robotics motors. I like to use Copper State for this, because while they have a totally garbage web ordering system, their prices are great, and their website isn't that bad (to be honest, I'm a bit spoiled by McMaster-Carr).
You probably don't need me to tell you what kind of COTS parts might be good (if that's within the scope of this money). Electronics, good phones (not those stupid ZTEs), motors, are all good.
You'll notice that I'm not suggesting the very budget stuff-- while you can go that direction if you need to, quality tools help you get quality results. If you have the money to get and use the right tools for the job, I always recommend doing that as opposed to cheaping out with something you'll just end up breaking and messing up your robot with later.
A decent chunk of the tools I linked are suggested by my personal favorite review site, The WireCutter/SweetHome. I've used the majority of them, and my experience has been good enough that I don't have an issue recommending their suggestions for other tools relevant to FTC.
Hopefully that was somewhat helpful. I'd definitely consider the answers to the questions at the top-- they can help you narrow down what will actually be useful for you. I can definitely give more specific suggestions if you know what direction you're taking with robot building techniques and how much space you have/ whether you have to move.
Did anyone notice the price on Amazon compared to Walmart
Best of both worlds right here:
http://www.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ
I bought two.. Couldn't be happier
You’re welcome.
https://www.amazon.com/dp/B007WMYS8Y?ref=ppx_pop_mob_ap_share
Annnnd here we go again, another crazy but fun contest =)
Thank you!
a
b
c
d
E
F
g
h
i
j
k
l
m
n
o
P
q
r
S
t
u
V
w
X
Y
Z
This is what I have in place of sockets to carry. I do have this as well, but you might be looking for more sockets. The pliers wrench should cover most things and it's way better than a nut fucker.
The go to wrench. http://www.amazon.com/Mine-Tools-HW12-Hammer-Adjustable/dp/B00H87JEBE
Always buy these:
http://smile.amazon.com/Stanley-85-610-10-Inch-MaxGrip-Adjustable/dp/B00009OYGZ/
They are always the correct answer.
Available on Amazon and it is Made by Loggerhead
What about a rubber strap wrench?
https://www.amazon.com/dp/B01NAP6FQJ/