Best audio preamplifiers according to redditors

We found 1,325 Reddit comments discussing the best audio preamplifiers. We ranked the 79 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Audio Component Preamplifiers:

u/GothamCountySheriff · 25 pointsr/vinyl

There is some good and not so good advice in this thread. I hope to help you clear some things up.

Your turntable is a semi-automatic, direct drive with a static-balanced tonearm and P-mount (T4P) type cartridge.

Semi-automatic means it will automatically return to the tone arm rest when the record is finished playing. Direct drive means it uses a motor under the spindle, instead of a belt and pulley system, to spin the record platter. Static-balanced tone arm means the tone arm has a factory set counter weight that cannot be adjusted. T4P P-mount cartridges are a simple, easy to use and install cartridge. They have a standardized tracking force. Your table doesn't have adjustments for tracking force, cartridge alignment or anti-skating. Those are the trade-offs for ease of use.

Your current cartridge is the Radio Shack marketed version of the Shure M92e. I would recommend replacing the stylus for it, but replacing the whole cartridge shouldn't be necessary. If you decide you would like a better cartridge, there are a number of upgrades available. Here is a decent, inexpensive Swiss-made Pfanstiehl replacement styles (no affiliation, just a satisfied customer):

http://www.ebay.com/itm/TURNTABLE-NEEDLE-STYLUS-SHURE-M92E-M99E-M104-N99E-N104E-/350420981609


You can get more information on your turntable from VinylEngine.com:

http://www.vinylengine.com/library/technics/sl-q200.shtml


As others have mentioned, you will need a phono preamp for your turntable. There are several relatively inexpensive options available. For a very entry level preamp, you can use the Behringer PP400:

http://www.amazon.com/Behringer-PP400-Ultra-Compact-Phono-Preamp/dp/B000H2BC4E

If you are willing to invest a little more, a better phono preamp is the ART DJ Pre II. In my opinion, it is the best value in the retail sub $200 preamp category. It is the one I use:

http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482


EDIT: Phone typo to Phono

u/PurpleMoustache · 22 pointsr/vinyl

Here’s why:

It actually DOESN’T sound good. Normally, I’m the kind of guy who goes “if it sounds good to you, it sounds good to you”, but Victrola/Crosley/etc brand turntables have incredibly INCREDIBLY cheap components, cheap speakers (that are part of the unit, which I’ll explain why that’s bad in a second), and a bunch more stuff, crammed in an ugly form factor for like $60.

Let’s break all that down:

Cheap components - depending on the model, the Victrola is either $60, or $110, frequently on sale for much less. We must also keep in mind the laws of economics, these machines are cheaper to make then they sell for. Let’s give a conservative estimate of $70 for the 8-in-1, and $40 for the 3-in-1.

The Audio Technica AT95E NEEDLE, not even a whole turntable, not even the cartridge it goes onto, just the needle costs $35, and that’s a cheap entry level needle.

Now ask yourself: if buying a needle is nearly as much as the whole turntable costs to make... how good are those parts? Probably not that great. In fact, the needle on most cheap turntables use ceramics, rather than diamond tips. Ceramic needles not only are harsher on records, but have a poorer quality sound overall.

Then we look at the motor, we need an even speed for playing back records, and with quartz crystals or belts, that’s fairly easy, but those systems are $$$, so we have a cheapo motor that can’t handle a constant speed leading to “wow and flutter”, fluctuations in pitch and sound caused by speed differences. Now, unless you have a really really high end deck, some amounts of wow and flutter are to be expected, but the Victrola has a high amount.

Then, the tone arm. Generally speaking, the needle shouldn’t be pressing down on a record more than 3-4 grams or so, depending on the needle/cartridge you are using. Because these things are portable, they need a solution that doesn’t get goofed up when you move it, so weight from the tone arm varies BY UNIT to 10+ grams. That’s CRUSHING your record, and actively wearing out the grooves. Now, yes, records DO wear out over time, but that’s after hundreds if not thousands of plays.

And lastly, the speakers. These are contained IN THE UNIT, meaning if you are playing loud, they are shaking the whole unit, and thus the needle, and thus reducing the sound. As well as the fact that these speakers are usually quite small, and as stated before, quite cheap.

The rest of the buffalo- So that’s just the turntable! Then you’ve crammed a cassette deck, a CD player, a radio (am and fm with antenna), a aux in, and a Bluetooth receiver in there, and you have to assume the cost of those parts are as cheap as well, so you really have a $20 turntable, $10 CD player, $10 radio, $10 cassette deck, $5 aux input, $10 Bluetooth chip, and $5 for plastic assembly and now you’re realizing you’ve paid $110 for a $70 Machine that promises too much and can’t fulfill much of what it claims to do very well.

Ugly- And then this is down to personal taste: dude, that shits just ugly. Faux wood paneling, a “retro” design that never really existed, disks and buttons everywhere. I’m not saying the LP-120 looks good, but it’s leagues better in comparison.

So that’s why it’s dumped upon.

So why would you spend $110 on a $70 machine, when you could save up about $100 more, and get a DRAMATICALLY BETTER MACHINE. Yes, it's made in China like the rest of the Victrola/Crosley tables, and yes, it has a plastic body, BUT!

It has:

  • A proper Quartz Lock mechanism keeping the speed constant

  • A good, starter quality needle and cartridge (the above mentioned AT95E), with the ability to CHANGE IN THE FUTURE (you can't do that on a victrola)

  • A tone arm weight you can set yourself, making sure weight distribution on your records is at needle manufacture recommendations

  • MUCH higher quality audio components, leading to a crisper sound

  • USB out, so you can record your records

  • and a built in pre-amp, so all you need is a pair of cheap bookshelf speakers, and the table, and nothing else.

    Or, how about only $60 more, and you could get a U-Turn Orbit. It's belt driven, so if you wanna run a record at 45 RPM you'd have to move the belt, but still, DRAMATICALLY better than the motor driving a Victrola, and again, DRAMATICALLY better parts for audio. Sure it's missing a Phono preamp, but that's only $13.

    In short: why would you buy a $70 machine for $110 if you could save up a bit more and get something so so so much better
u/MrDorkESQ · 14 pointsr/whatisthisthing

It is a proprietary connector for one of the entry level all in one systems. They were designed to look like a component system but in reality you bought it all together in one box and it all only connected to itself.

I tried to find a pinout or an adapter that you could use but in the 10 minutes I spent i found nothing.

Ostensibly, the five pins would be the same as any other turntable. Right channel, left channel, and chasis ground. You would probably need a line level amp to hook up to it as well.

edit: After further searching, the wires are 12v DC, ground, right, left and signal ground. I can't find a pinout though.

u/rpbtz · 13 pointsr/vinyl

For that amount of money you should be able to get a U-Turn, a preamp and a set of cheap powered speakers.

If you want something even better you can look at used equipment, although I understand giving used stuff for Christmas might not be desirable for all.

EDIT: A system could look something like this:

  • U-Turn Orbit turntable - $179
  • Art DJ Pre II phono preamp - $29
  • M-Audio Studiophile AV 30 powered speakers - $76

    or if you can stetch the budget a bit

  • Micca PB42X powered speakers - $120.

    That'd be a total of $284 (with M-Audio) or $328 (with Micca) (excl. potential shipping cost). Much better investment than the all-in-one system. It will sound MUCH better and last your gf MUCH longer. And as an extra bonus she can upgrade individual parts if she decides she wants to gradually upgrade later on - something which is more or less impossible (or at least impractical) with the all-in-one-system.
u/Lowe0 · 12 pointsr/NintendoSwitch

If you absolutely need a legacy port like optical, then just use a converter.

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

Otherwise, there's no sense making everyone pay for a jack they don't need.

u/sharkamino · 10 pointsr/BudgetAudiophile

The new X version has some improvements over the old one.

If your budget is under $200 Monolith by Monoprice Turntable with AT100E on sale for $149 is a clone of the $209 Fluance RT81 from the same factory for $60 less.

A very worthwhile step up is the newer Fluance RT82 $249. It adds an optical sensor speed controlled servo motor for lower wow and flutter and speed variation. The speed never drifts since the sensor is monitoring it 500 times a second. A later optional upgrade is the acrylic platter for $119 as seen on the RT85. If the Denon recevier does not have a phono input and if low on budget start with a $15 Pyle phono preamp which may be as good as a basic one in the Monolith and older RT81. Or a step up is the ART DJ Pre II $67. If starting with the Pyle, a later optional upgrade is the Schiit Mani $129.

The Denon recevier has an amp inside of it to power the speakers.

An alternative to the Klipsch R-51M for a lower cost is the closeout 6.5" DCM TP160 by MTX Audio $249 $89 pair. Review by u/DieselWang, Video Review and DCM TP160S vs the SVS Ultra Bookshelf.

Or the tower version DCM TP260 2-Way by MTX Audio $399 $149 pair and you don't need to build or spend $65+ on speaker stands if you don't already have some.

Speaker wire: Pure Copper Oxygen Free Speaker Wire then 4 Ways to Strip Wire. Optionally add banana plugs. Already with banana plugs AmazonBasics buy 2 for a pair 12ft each.More options at Crutchfield, DFWCableConnection, Blue Jeans Speaker Cable and Blue Jeans at Amazon.

Speaker Stands: Sturdy Monolith by Monoprice Speaker Stands. Or lower budget Dayton Audio SSMB24 or Monoprice Glass. DIY Custom Speaker Stands.

Speaker Placement: Stereo Music Listening or Home Audio and Home Theater. Also How to position your speakers for great sound for the focus diagram.

Home Audio Guides: Intro to home stereo systemsZeos Tutorials, Diagrams and Videosr/audiophile Guide to Home AudioIntroduction to Audio ComponentsWhat is a Phono Preamp? | Audio AdviceHow to Connect a Turntable to a Receiver

u/vaper7777 · 8 pointsr/BudgetAudiophile

Cool setup!

​

Here are some ideas:

​

  1. Stand in the middle of the room and clap your hands once. If you hear any sort of echo, that means the room is "hot" and needs some sound dampening. The longer the echo, the more dampening. You can do this in super simple ways, like putting a rug on the floor and adding wall hangings. I'm talking garage sale-level stuff. Don't spend a lot of money on those, all you are trying to do is get rid of some of the reflections. This should help you hear what's coming out of the speakers, rather than what is bouncing around the room.

    ​

  2. Find a CD that has sine-waves of different frequencies. Or go here: http://www.szynalski.com/tone-generator/ (plug your computer into the system). Play some notes in the bass (and mid) range and walk around the room. You will notice that your bass (and mid) is quieter in certain places. Those are called "nodes." You kind of want things so that you don't have a lot of these. The reason is so that you can be in different parts of the room and hear about the same thing. Try moving the speakers around and pointing them in different directions to see what that does. Try moving the "stage left" sub to the corner kind of behind the piano, for example. You might even be able to put both subs there. Nodes actually form at all frequencies (that's why cell phone reception can be strong in one part of a room but not in another), but the bass and mid are the ones that are pesky and noticeable.

    ​

  3. Try running your speakers out of phase. Switch the positive and negative leads on *one end* of *one speaker* only (doesn't matter which). Some people like this effect (I don't). But if there's a lot of reflections in your room, it may be a simple trick. Try it with your subs too. It won't hurt anything. Your subs should have a phase toggle switch, actually.

    ​

  4. If there's a place in your signal path for analog - try running this: https://www.amazon.com/FX-Audio-TUBE-01-Preamplifier-Black/dp/B01HEQJGPC - I have one and I like how it makes things sound. To me at least, it does actually make things sound warmer and more fluid.

    ​

  5. What sounds good to you is what you are aiming for. I used to think that I liked super accurate sound. But I found that it fatigues me after long listening sessions. Now I like sound where I can still place the instruments (sound stage), but it doesn't need to be clinical.

    ​

    Source: my original major in undergrad was audio recording engineering. After that I did sound for a couple of nightclubs and churches. I learned super simple things (like speaker placement) make a huge difference.

    ​

    Also - when you do any sort of evaluation of your speaker placement and or room changes, listen at the level that you plan to listen to things at. For example, if you plan to listen loud - then test loud (and vice versa). The way we hear things changes with volume. That's why music at low levels sounds like it lacks bass. The bass is still there, but our hearing is tuned to hear frequencies that are closer to the sound of a human voice or baby crying. This is also why certain recordings sound crappy at low volume, but excellent at high volume (a lot of metal is like this). Those recordings were mixed at high volume. At low volume they will sound like they have no bass.

    ​

    ​
u/lintrhino · 8 pointsr/vinyl

I'm going to go out on a limb and say "no phono stage" Your amp doesn't have a Phono preamp, just line level. If you review the tiny bit of info that comes with that cart you'll see that the output is somewhere around .5mv Line level, What you get from CD players your TV etc is around 1v.
get yourself one of these:http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=pd_sim_MI_2 (though sumiko/pro-ject makes a much nicer one for only a bit more moola. Happy spinning!

u/SoaDMTGguy · 6 pointsr/Metallica

Ohhh, a newbie! This will be fun... 🙃

A standard record player/turntable (you can use them interchangeably) will output using stereo RCA. The signal needs to go through a Phono Preamp first. Some turntables have a preamp built-in, most do not (especially as you move up the quality scale).

Then you need an amplifier to power the speakers you get. Some speakers can be plugged directly into a “line-level” jack (think headphone port). Others need an amplifier. You can get a cheap one on Amazon like this, or a nicer one like this, or you could try your local thrift store; stereo amps don’t have to be particularly new, so it’s often easy to score one for cheap.

As for the actual record player, [Rega] and Pro-Ject are the two big brands, as well as U-Turn and the every level. What I would call the first fully “proper” turntable starts at around $400. A U-Turn Orbit can be had for around $200. You can get a black plastic Sony or AudioTechnica on Amazon for $100, but I would advise against it.

The tables you’ll want to look for are the Rega Planar 1 (or “P1”), the Pro-Ject Debut/Debut Carbon, or the U-Turn Orbit. Don’t buy from Amazon. Best Buy/Magnolia is a good source, as is your local Hi-Fi dealer (assuming you have one).

I’ve owned the Pro-Ject Debut Carbon and the Regs P3, and liked them both. Please feel free to ask my anything, or PM me. I’m happy to help in any way that I can!

u/MyPackage · 6 pointsr/vinyl

Buy a U-Turn Basic, Micca MB42 speakers, Lepai amp, Pyle pre amp and some cheap speaker wire

It's over your budget but this is about as cheap as you can get while still getting new high quality gear.

u/smugcaterpillar · 6 pointsr/vinyl

From the looks of that receiver, there's no "phono" input, which routes the signal through an additional preamp before hitting the power amp. Older A/V components have them, I doubt yours with 4 HDMI inputs does. You could try connecting it via USB, but I'd advise against that and instead point you to an inexpensive phono preamp like this:

http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_1?ie=UTF8&qid=1376256067&sr=8-1&keywords=phono+preamp

u/BTsBaboonFarm · 6 pointsr/vinyl

$300 - $500 can get you a great new setup if you piece it together correctly. On the lower end, here's one I'd recommend

Turntable: U-Turn Orbit Basic: $179

Phono Preamplifier: ART Pro Audio DJPRE II: $49

Speakers: Edifier R1280T Powered Bookshelf Speakers: $100

By going with active/powered speakers, you can forego getting an AV Receiver for amplification needed for passive speakers (you could also look at receivers with built in phono stages and passive speakers if you want to spend a bit more).

This would cost about $330, not including any additional/longer cables or any other accessories. It isn't a top of the line rig, but it would be a pretty big upgrade from what you have now

You could also go the vintage route and probably get an even better setup, but you'll need to know a bit more on what to look for in terms of conditions and brands and whatnot

u/faemir · 6 pointsr/vinyl

Cheapest new turntables that are good:

  • U-Turn Orbit
  • Pro-ject Elemental
  • Pro-ject Essential II
  • Rega RP1
  • AT-LP120

    For the top four, you'd need a phono stage too e.g. this one.

    If you're from the US then posting your CL would let people on here find a good second hand purchase for you that would potentially be much, much cheaper with a tiny bit of TLC first.

    Are you looking for amp/speakers too?
u/TophatMcMonocle · 5 pointsr/vinyl
u/Error400BadRequest · 5 pointsr/vinyl

You need a phono preamp. A normal amp won't cut it. Turntable output levels are low, and the bass is really reduced on the record itself because if it was done at the right levels, the needle could jump around and potentially damage the record. This change in recording media is referred to as RIAA Equalization.

To fix the bass, you're going to want a proper phono preamp to apply the proper equalization curve. The Art DJ Pre II is recommended in the Budget Setup Guide, so I would consider purchasing it if you do not wish to purchase another receiver with a phono input.

u/DeuceSK · 5 pointsr/vinyl

You need a phono pre-amp to amplify the signal, or a different amp with a phono input built in. Here is a couple of very cheap pre-amps: pyle or Behringerfor example.

u/MrKazador · 5 pointsr/hometheater

You can do optical or Arc but you'll only get DD or DTS.

https://www.amazon.com/gp/aw/d/B0755TB82Q/

This device claims it can split the audio and video so you get lossless audio to the receiver and 4k to the TV.

u/imdur · 5 pointsr/wiiu

You're only saying it's complicated because of your very specific requirements, i.e. using a monitor. That's certainly not the norm, now is it?

However, don't get me wrong, being able to listen via the gamepad is convenient if using headphones. A lot of people would really like that feature for the Netflix app, for instance. On the flipside of that, you could simply plug headphones into a tv (normal procedure) or for people like myself, an audio amplifier.

Now, here's a solution specifically for you - http://www.amazon.co.uk/ViewHD-Audio-Extractor-Converter-Model-VHD-H2HSAs/dp/B00KBHX072

This will allow you to split the audio off so you can set up audio outside of your audio-less monitor. If you have the right cable adapter, you could use headphones. I know this works because, I have this same device for when I visit my parents' house as, they have a faulty audio system on their tv. So, this allows me to patch the audio digitally, via an optical cable.

u/zim2411 · 4 pointsr/audiophile
u/JaisBit · 4 pointsr/vinyl

> Harmon Kardon AVR1510S

That model does not have a built-in Phono preamp. You need something like this: https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

u/mitchard · 4 pointsr/vinyl

In my opinion, you should skip getting a cheaper USB table and go for something a little nicer. You'll have to throw more money at it initially, but it's worth the investment.

For something cheap, go to Craigslist. Find a Technics or Sony for cheap and replace the needle/cartridge on NeedleDoctor.com. You'll be happier with that. Trust me, I was in your position a few years back and made the mistake. The Ortofon Omega is a solid choice for a lower-end cartridge. Sould be able to get one in the $30 range, which is very inexpensive when it comes to phono cartridges.

If you want to go new, look into the Pro-ject Debut Carbon. MusiciansFriend.com always has discount codes around to help lower the price. I'll be upgrading to one shortly.

If you don't have space for speakers and a receiver, you can pick up cheaper phono headphone preamps all over the internet. I don't have experience with this one in particular, but it seems to be decent on a budget based on the reviews.

http://www.amazon.com/ART-II-Preamplifier-Outputs-Switchable/dp/B000AJR482/ref=sr_1_3?s=electronics&ie=UTF8&qid=1381253872&sr=1-3&keywords=phono+preamp

u/Buck_j · 4 pointsr/vinyl

Yes, you will need a phono preamp with an Orbit Plus and your receiver. I recommend this one. It is very highly regarded in audiophile forums in its price range. I would not recommend going any cheaper.

That receiver and those speakers are perfectly adequate to get you started, both are considered good entry-level options. Pairing a subwoofer with those speakers will provide a marked increase in sound quality on the low-end. I would recommend doing so. I recommend this sub, as it is a fantastic value and will serve you very well.

Here is some information about hooking up a subwoofer to a stereo receiver that does not have a dedicated subwoofer output. Hint: just use speaker wire in the "B" terminals.

Looks like you have yourself a decent starter setup which should serve you well. Have fun.

EDIT: get your speakers off the damn floor. Either get some stands or a platform to isolate your turntable from vibrations caused by the speakers if you want to put them on top of your shelf (platform probably isn't terribly necessary with bookshelf speakers unless you play your music very loudly).

u/CalSplod · 4 pointsr/vinyl

Just got a new Project Debut 3 SE and a accompanying Pro-Ject Phono Box MM Amplifier. My problem is that, i can now hear a humming noise in the left speaker, where i couldn't hear one with my old turntable which had a internal pre amp. What can i do, if anything, to fix this issue?

u/checkerdamic · 3 pointsr/vinyl

I have jerry rigged plenty of turntables up for sampling so... let's see what we can do here...

(1) Pick up a used turntable from your local craigslist or used electronics shop (follow the guide or post here for recommendations). Depending on your location, $100 will find a basic vintage turntable. Make sure you get a new stylus, maybe even a new cartridge depending on what you want to do. If you want to do backcueing, starting and stopping on the fly, or scratching, get a DJ-oriented cartridge. I recommend the Shure M44-7, it's a workhorse and widely available, you can even pick them up at Guitar Center if there is not an audio shop around you. Runs about $60-70. DO NOT DO NOT DO NOT backcue, start and stop on the fly, or scratch with a regular cartridge. You will fuck up your stylus and your record.

(2) As long as the 2i2 has a built in preamp (not sure if the mic preamps on it will work for all turntable--see comment below) all you need to go from your turntable to your 2i2 are adaptors that go from RCA to 1/4 jacks that you can then plug into your 2i2. You can pick them up at Radio shack or order them online. You can use a regular RCA cable and then use these RCA-to-1/4 adaptors, they are like $3... Radio shack will have them if you don't want to order them online. You could also pick up a RCA-to-1/4 cable, these are more expensive and I would just go with the first option as it also allows you to use better cables, but that's up to you. These are your cheapest options to get you started. The best way to sample is to run your turntable into a dedicated audiocard with RCA/phono jacks on your computer... something to think about in your future.

(3) If the mic preamps on the 2i2 do not work or sound weird because they do not have RIAA equalization, then you might need a phone preamp amp. The cheapest one that gets recommended around here is the ART DJPRE II which is $50. You would hook up your turntable to the preamp and then run the cables with the adaptors mentioned in (2) to the 2i2.

(4) If (2) and (3) don't work or seem like too much you could always pick up a preamp with a USB output. I know that there is the ART USB Phono that has built in USB output for $80. I have not used this and cannot comment on the sound quality.

Good luck.

u/Pondered · 3 pointsr/vinyl

You need a phono stage between your U-Turn and your receiver as your receiver lacks one.

Basically, the phono stage amplifies the signal from your cartridge and stylus, without it, you won't hear anything.

The cheapest recommended option is the ART.
http://www.amazon.com/ART-DJPRE-II-Preamplifier-Switchable/dp/B000AJR482

I have one for a spare table and it's fairly decent, especially for the price.

u/m4rc · 3 pointsr/vinyl

Take a look at the ART DJPRE II or the Pro-Ject Phono Box MM. I don't have experience with either of those, but they are pretty popular.

u/JimboLodisC · 3 pointsr/vinyl

Out of the ones I've seen recommended in this sub:

> "I just need something."

  • ART DJPREII - $49

    > "I want something decent."

  • Pro-Ject Phono Box MM - $79
  • U-Turn Pluto - $99

    > "I want something really good."

  • Pro-Ject Phono Box - $129
  • Schiit Mani - $129
  • Emotiva Audio XPS-1 - $179

    ***

    I've personally had my eye on a Schiit Mani but might save up for a Tube Box S. I play guitar so anything tube kinda draws me in. I still need to mod the preamp out of my LP120 so I don't fully know how well my Klipsch's preamp is performing. If it's good enough then I can save up for the Tube Box S.
u/sqllex · 3 pointsr/turntables

Art DJPre II

Pyramid 12v DC power supply

This combo was recommended to me a while back. I am quite happy and probably won't upgrade until I'm ready to drop $1k on a preamp.

u/doombot11 · 3 pointsr/vinyl

Speakers should be most of your budget as they have by far the biggest impact on sound quality. I built my entire system for around the same amount, and incidentally also considered the RP6.

I went:

u/JasonJ22 · 3 pointsr/vinyl

I'm looking to purchase my first setup. This is what I've come up with based on recommendations mainly from this subreddit:

TT: U-Turn Orbit basic
Preamp: Art DJpreII
Amp: SMSL SA60
Speakers: Micca MB42X

Does anyone have any advice on additions/subtractions to this setup? My concern is that I'm unable to listen to these components in person and I've only experienced vintage equipment. I really enjoy that 'warm' sound from what I've listened to previously. Will that be lost with all modern equipment?

Thanks in advance!

My listening taste is wide ranging, heavy on classic rock/jambands:
Steve Miller Band - Pink Floyd - Phish - Grateful Dead - Gorillaz - Radiohead

u/StevieG63 · 3 pointsr/vinyl

Yes. And with a TT as good as a P2, you need a decent phono stage.

The ART DJPreII seems to be the entry level fave.

If you buy a vintage amp or receiver, it will have a phonp stage built in - and it will likely be quite good.

Don't cheap out. The P2 is a good bit of kit. Make sure you're hearing it to it's full potential. Don't cripple it out of the gate with a crappy phono preamp.

u/logggur · 3 pointsr/sonos

I’d probably just get a preamp with adjustable gain if it’s really bothering you. Something like this: ART DJPRE II Phono Preamplifier https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_cp_api_ovn9Bb6DVF97D

The preamp only modulates the signal from your turntable to something your amp can pick yo, it has nothing to do with the amplification of your speakers. I guess running it through an amp then connecting that to your Connect would accomplish essentially the same thing, but with a bunch of extra equipment designed to push speakers you wouldn’t need if your only goal is to increase the turntable signal.

That being said adding the amp would allow you to add some nice bookshelf speakers at your turntable and use that as an additional spot in your sonos network...

u/explosivo563 · 3 pointsr/audio

Art dj pre ii for sure. The gain knob and clipping LED are great features that are definitely worth it. This is a highly regarded phono pre for $50.

http://www.amazon.com/ART-DJPRE-II-Preamplifier-Switchable/dp/B000AJR482/ref=sr_1_sc_1?ie=UTF8&qid=1458507700&sr=8-1-spell&keywords=Art+djpree

u/robotdinofight · 3 pointsr/hometheater

Don't pay too much attention to a phono input. You can get a quality pre-amp for ~$40 (though it drops down to under $35 regularly.) https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482/ref=sr_1_1?ie=UTF8&qid=1500051123&sr=8-1&keywords=dj+pre+ii

u/badger28 · 3 pointsr/vinyl

I've already been told I need a phono preamp. Do I need anything else? A receiver, or another amplifier? A: You will need either a receiver or amp also.

This is the exact pre-amp and amp I bought and they work really good for starting out.

How can I tell what quality my needle is in/whether I need a new one? A: the quickest way is to set everything up and play a record you don't care about. If it plays good then you are set, if not then you will need a new cart probably, these typically come with a new needle.

Kind of along the same lines, how do I make sure the needle/tonearm is correctly balanced? A: look up the manufactor's tracking force for that cart. then use one of these to see what your tracking force is. You'll adjust the tracking force using your counter weight. Also your anti-skating force is typically the same as your tracking force, but check your manufactures specifications. This video will show you how to adjust your cart so it track right across the whole record.

If you need a new cart, either ask here after you get done testing the one on it, or google Sanyo TP 1010 cartridge replacements. I personally am a fan Shure carts and needles.

I hope this helps.

u/adayinalife · 3 pointsr/vinyl

Assuming you want to buy new, here is what I would do:

Turntable: Project Debut Carbon DC $399, obviously pick your colour preference. http://www.amazon.com/Pro-Ject-Debut-Carbon-DC-White/dp/B00IIMXBHG

Receiver: Yamaha RS201 http://www.amazon.com/dp/B00F0H88SY/ref=psdc_14269301_t3_B000MBUSD6 $149

Phono stage: ART DJ PRE $39 http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482

Speakers: ELAC B5 $229 http://www.amazon.com/Debut-Series-Bookshelf-Speakers-Andrew/dp/B014GSER6O

Forget about the sub, getting a musical sub on a budget is difficult, if you want more bass look for floor standing speakers down the line.

You can probably save some money by buying a vintage receiver.

u/IHeartThe80s · 3 pointsr/vinyl

This is mine. Me like.

u/thewatermellon · 3 pointsr/BudgetAudiophile

You'd probably have a much easier time finding what you want if you figure you're going to do the phono preamp separate. I'm not familiar with any sort of swiss army knife reciever like what you're looking for. For $50 you can pick up the ART DJpre II, which should be more than adequate. As for the receiver, I'm sure someone else on this sub will know better than myself, I'm not as familiar with those larger amps.

u/billybombill · 3 pointsr/vinyl

I have an SL-B3 (belt driven, but similar to the D3) with a M97xE, and I'm very happy with how it sounds. Unfortunately I currently don't have a way to hook up my Q701's to it so I can't comment on the sound signature with them combined. The Vali will probably add some nice warmness to the sound so my experience would sound a bit different anyways. I'd imagine it will sound pretty good though :)

I don't think you can go wrong with either the 2M Red or the M97xE, I've heard people say that the the 2M has a brighter sound, while the Shure's high's are rolled off. I can't say I've ever been able to hear them side by side though to confirm this.

And yes you will need a preamp to boost the turntable's phono output up to a line level signal. The ART DJ II is pretty good for the price.

u/drrrewww · 3 pointsr/vinyl

I am currently in a cramped living situation so I have a similar setup. I have my Pro-Ject Debut III ran to this pre-amp which is ran to my home theater receiver

Not the best setup in the world but it works well for the time being. The pre-amp does its job and the receiver actually has some nice sounding music EQ's as well.

When I first started collecting I was gifted an ION USB TT and I was told to get a better TT so I do not further damage my records. So I upgraded the TT. While the setup is not ideal, it is listenable and I am not damaging my records while building up my setup.

u/gordonkristan · 3 pointsr/vinyl

Without knowing what turntable you're talking about, nearly all turntables need some kind of amplifier. You're probably asking whether or not you need a pre-amplifier, and in that case the answer is probably. A handful of turntables come with built-in pre-amps, but most don't. If you do end up buying one, the ART DJPRE II is consistently rated fairly well, and it's worked great for me. No need to spend a ton of money on one.

u/eppic123 · 3 pointsr/audiophile

The Audio Technica is a great turntable! But the build in preamp and the fixed cable would be an absolute no-go for me. So I'd definitely suggest you getting the Pro-Ject Debut Carbon. I have the Pro-Ject Debut Carbon Esprit myself, and I love it!

As for the preamp: There are lots of great preamp, like the NAD PP 2i, Cambridge 651P or Musical Fidelity V-LPS II, but I think those are a little bit too expensive for you. Maybe you should take a look at this one. It's definitely not the best, but ART usualy has some great value for the money.

u/Aylesbury · 3 pointsr/vinyl

There's absolutely no need to buy a used record player. I burned myself buying a used one when I started. Anyhow. I'd spend most of that money on a turntable, so you have a good solid base to build upon in the future. A Pro-Ject Debut Carbon is juuuust within budget. Amazon It's quite a serious turntable actually. It has a carbon arm and a 2M Red cartridge, which itself can be easily upgraded to a 2M Blue in the future. Maybe you could find a good used Phono Box MM to go with that. I have one on my RPM 1 Carbon and I'm quite happy with it, despite usually being fairly reasonable. Having said that.. it's surprisingly expensive on Amazon in the UK, but they can be found on eBay. I'm afraid you just have to work with what you already got when it comes to speakers or headphones. Otherwise, a Essential may be a cheaper alternative. Amazon

u/yatrickmith · 3 pointsr/vinyl

What would be the difference between these Phono Preamps? They all vary in price, and I've seen them all talked about on this sub, and I've researched review sites/videos on Google and YouTube, etc. And I really can't find someone saying one or the other is clearly better. There's just so many preamps I see that are recommended, and I keep asking questions in this thread to get a better idea so that I can purchase one.

Schiit Mani -- http://schiit.com/products/mani

Music Fidelity V90 LPS -- https://www.amazon.com/Musical-Fidelity-V90-LPS-Phono-Preamp/dp/B00E5BY9SO/ref=sr_1_2?s=aht&ie=UTF8&qid=1475180747&sr=1-2&keywords=schiit+mani

Rolls VP29 --https://www.amazon.com/rolls-VP29-Phono-Preamp/dp/B0002BG2R2/ref=sr_1_6?s=pc&ie=UTF8&qid=1475183493&sr=8-6&keywords=bellari+phono

Pro-Ject Phono Box MM -- https://www.amazon.com/Pro-Ject-Phono-Box-Preamplifier-Black/dp/B000YEK1AQ/ref=sr_1_2?s=aht&ie=UTF8&qid=1475183640&sr=1-2&keywords=project+phono

Hackerman Bugle 2 -- https://hagerman-audio-labs.myshopify.com/products/bugle2

Pro-Ject Phono-Box S -- https://www.amazon.com/Pro-Ject-Audio-Phono-preamplifier-Silver/dp/B007I961IQ/ref=sr_1_1?ie=UTF8&qid=1475184602&sr=8-1&keywords=project+phono+preamp+s

These are all phono preamps that I've seen that are pretty popular on the Internet and on forums, reddit, etc, but I don't know the difference between all of these. If it helps, I just purchased a Pro-Ject Debut Carbon DC and I already have Audioengine 5 speakers.

For budget, I'd want to stick between $100 and $200, but I'm willing to go to $250.

u/brazen8 · 3 pointsr/BudgetAudiophile

I use a Pro-Ject Phone Box MM ($79). I'm really happy with it. I've heard a ton of good thing about the Schiit Mani ($129). I'm tempted to upgrade.

Pro-Ject Phono Box MM DC Phonograph Preamplifier,Black https://www.amazon.com/dp/B000YEK1AQ/ref=cm_sw_r_cp_apa_1XvVBbRC11VXF

Schiit Mani
http://www.schiit.com/products/mani

u/Rrussell2060 · 3 pointsr/BudgetAudiophile

Here are a few to consider:
BEHRINGER MICROPHONO PP400 http://amzn.com/B000H2BC4E
BEHRINGER U-PHONO UFO202 http://amzn.com/B002GHBYZ0
Pro-Ject Audio - Phono Box MM http://amzn.com/B000YEK1AQ
Little Bear Tube valve Phono Turntable RIAA MM Preamp preamplifier amplifier Ver2.2 http://amzn.com/B00H0FIGUO

u/OG_TENDO83 · 3 pointsr/NintendoSwitch

www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072 :)

u/nixerkg · 3 pointsr/NintendoSwitch

I think it might but if it doesn't this can get the job done. Might find it cheaper on eBay if you're willing to wait for it to be shipped from China.

u/tvtoo · 3 pointsr/cordcutters

Your best solution is a new TV (instead of a 'monitor' like the Marantz).

Your second best solution is:

u/archpope · 3 pointsr/Roku

I have some experience with this. Original hookup was

Roku ---[HDMI]--- TV (Sharp) ---[SPDIF]--- Soundbar (Yamaha)

The problem with this setup was no matter what I set the delay to on either the TV or the soundbar, the sound was always out of sync. The soundbar didn't have HDMI input, and the TV only supported Dolby Digital whereas the Roku and the soundbar supported DTS. So, I bought one of these and it solved all my audio issues.

EDIT: if I upgrade to a Roku 4, it has SPDIF out, so I won't need the extractor anymore.

u/faceman2k12 · 3 pointsr/hometheater

HDMI audio extractors exist, I use them in projector installs quite often where we need to split off an analogue audio signal to go to a PA system without a reciever. They have the DAC built into them and most can downmix 5.1 to stereo, some can convert to pro-logic for connection to older surround systems without digital inputs.

You just need an RCA to 3.5mm adaptor cable to connect to a 3.5mm input.

u/Onlyspacemanspiff · 3 pointsr/appletv

ViewHD HDMI Audio Extractor | Optical Toslink + L/R Stereo Analog Converter Outputs | Model: VHD-H2HSAs https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_api_bWrYBbHE8J0FQ

This is what I use. Works great.

u/digicow · 3 pointsr/appletv

You could also use an HDMI Audio Extractor to send the audio to speakers that accept optical or RCA stereo (or minijack, with an inexpensive adapter)

u/asparagus17 · 3 pointsr/Chromecast

They make HDMI audio extractors. You can find them on Amazon.

ViewHD HDMI Audio Extractor | Optical Toslink + L/R Stereo Analog Converter Outputs | VHD-H2HSAs https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_other_awd_-uh.wb9PTD9CY

u/homeboi808 · 3 pointsr/hometheater

How old is your tv? Most tv's made with 5 years will pass surround out via optical, unless it's a cheap model.

Here is an audio extractor.

u/PlausibleDeniabiliti · 3 pointsr/Chromecast

I think a [HDMI audio extractor](
https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_awdb_wZGOzbXHRRJM2) is what you are looking for.

u/Splash_II · 3 pointsr/Chromecast

No... Your projector needs to be on for that to work.

But you can plug the Chromecast into your AVR (if compatible) then out of your AVR to the projector.


Or, get a HDMI audio splitter... it's a passthrough box.


Chromecast ➡️ HDMI splitter ➡️ HDMI cable to projector, audio cable to AVR


Something like this


https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072

u/troyer2112 · 3 pointsr/CarAV

So this is how i have mine set up.

iPad mini 3 128g>Lightning Digital AV adapter>HDMI cable>HDMI to Optical Converter>12V to 5V converter>Optical Cable>Alpine PXA-H800/RUX-C800>Alpine PDX-V9>Alpine SPR-60c>JL HO W6v3 Wedge

I have the hdmi converter plug cut and soldered to the stepdown voltage converter which is soldered to the back of the 12V Cigarette lighter all heat shrinked wrapped. The HDMI cable is extra long so i can have the iPad to the passenger seat comfortably. I did have a lightning cable extender that worked for a while but it suddenly stated that this cable can no longer be used for this device so i had to bring the AV adapter outside of the dash so it looks a little weird....but what are you gonna do.
As long as it sounds good i dont really care.
The RUX-C800 remote for the H800 is installed below my console near the gearshift in my Honda Civic 2009.

The installation took a bit of time since i couldnt leave everything undone because i had to drive it but i saved a whole lot of money.

At the moment i just have a magnetic holder stuck in my cd player slot to hold the ipad. I will be getting a prefab console ipad installation kit when i have the time to do so.

I was also able to leave my back speakers connected to the stock radio if i would like to listen to the radio for sports talk.

u/answer-questions · 3 pointsr/NoStupidQuestions

You have a few options, the PS4 can output audio from 1) HDMI 2) Optical 3) 1/8" Jack on the PS4 controller.

If you're just playing yourself and you want to use headphones, just plug it into the jack on your controller. If your setup allows you could run an audio cable from your controller to speakers also, but that's a bit janky.

If you have separate speakers and they can take in digital input (optical) then you can use that directly.

If you have speakers that can only use analog audio input and you don't want them hooked directly into your controller then you have to get something that splits out the audio from the video from HDMI. This was the cheapest I could find: http://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

u/will592 · 3 pointsr/diyaudio

I have one of these, http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

I think it does exactly what you're looking for. I needed it because I had a very nice flat panel TV that only had a DVI input and I needed a way to get the audio out of the HDMI that was coming from my source device so I could plug it into the TV.

u/_asciiuk · 3 pointsr/xboxone

That's the wrong cable there buddy, it's toshlink to toshlink mini not 3.5mm jack, and the adaptor cable is 3.5mm female.

Try something like this instead if your speakers use stereo analog etc.

u/Magmar_01 · 3 pointsr/vinyl

Need some tips on purchasing some powered speakers and a preamp.
These are the two speakers I'm looking at:

https://www.amazon.com/dp/B00GP56OYA/ref=cm_sw_r_cp_api_BLhPzb88KAQFE

https://www.amazon.com/dp/B00HG16XFM/ref=cm_sw_r_cp_api_MNhPzbZBEEGA6

Also would love any other suggestions besides these two that are at or below the price point.

Below are the two preamps I'm also looking at:

https://www.amazon.com/dp/B007DB5I60/ref=cm_sw_r_cp_api_DOhPzbKPT5V8V

https://www.amazon.com/dp/B018WK56JE/ref=cm_sw_r_cp_api_7OhPzbPFNQERD

Same as the speakers willing to take suggestions for a possibly better preamp at or around the same price point.

u/damnspynovels · 3 pointsr/vinyl

you can get a cheap pre-amp. i reckon you'll find one for like $30-40. it'll be a piece of shit, but it'll allow you to get use out of a vintage TT considering your active monitors (which I presume have a line in?) for now.

EDIT - even cheaper: http://www.amazon.com/Pyle-PP999-Phono-Turntable-Pre-Amp/dp/B00025742A - again, not vouching for the quality of this, but it'll be a better stepping stone than the LP60.

u/iplaysthedrums · 3 pointsr/vinyl

I dug out my dad's old Technics SLB30 over the weekend, and its currently being repaired. While I wait for that, I want to start assembling the rest of the set up.

So far, I've chosen the recommended beginner setup on a budget from the sidebar (Dayton speakers, Lepai Tripath, DJPRE). I noticed that the DJPRE II preamp is now nearly 50$ on amazon though. I did find this guy (Pyle PP999)on Amazon, and was wondering if anyone has any feedback on this preamp. The reviews seemed promising, and I figure I could upgrade at a later time if I want.

u/smckenzie23 · 3 pointsr/vintageaudio

I love my vintage gear, but there is nothing wrong with his amp, and there are a ton of decent cheap phono amps out there.

​

It will be hit or miss finding decent vintage equipment for $200, unless you are lucky or know what you are doing, & his Yamaha should put out a clean 80 watts per channel. I'd suggest a cheap amp for $20. He could easily wind up with a downgrade in sound by blindly picking a $200 vintage unit.

​

u/Mike_Rotchisari · 3 pointsr/vinyl

I've got you covered for about $35, possibly cheaper depending on whether or not your turntable already has a pre-amp built in.

What you need:

  • Pyle Phono Preamp for $15.42 - cheap, will get the job done. I have a feeling that you've got something already if you are listening to records at proper volume
  • adapter cable like this - so your 3.5 mm input will be switched to RCA plugs
  • Y-cable like this - this is for your computer
  • This A/V switcher for $16.79 - This is where the magic happens. You could honestly buy any switcher that does the same thing as this at a local store, but here's what's cheap on Amazon.

    Here's how it works:

  • 3.5mm on your speakers -> RCA adapter -> one of the outputs on your switcher
  • Line out from turntable -> preamp -> input on switcher
  • audio out jack on computer -> Y cable -> input 2 on switcher

    Now all you have to do is press a button to change inputs. And like I said earlier, if your turntable already has a pre-amp built in, or you already own a pre-amp or receiver, then you can knock $15 off the price and have everything you need for under $20. Possibly right now if you head to a WalMart or something.

    Edit: The bonus about this method is you keep the signal analog the whole way through. Also, as mentioned by /u/apapousek, a two channel system is the absolute best audio upgrade you can make at the moment.
u/nickdanger3d · 3 pointsr/sonos

Before doing that, make sure your turntable has a preamp built in. If it doesn't, you need something like this to make sure it doesn't break your shit.

u/jcsatan · 3 pointsr/vinyl

Had the same turntable. The built in pre-amp isn't great. If you get a preamp (like this) the sound quality would be a lot better and you won't have to have your speakers on blast.

u/jp1704 · 3 pointsr/vinyl

Hello everyone, so not too long ago I bought a turntable, pre amp and an amplifier. Recently my preamp died and I wanted to upgrade to something that includes both the amp and a preamp. I'm not very familiar with this kind of equipment so I was wondering if someone can point me in the right direction as to what to look for. Below I have linked all the equipment that I have. So basically I want to replace the amp and pre-amp with something that can do both. Also I'd prefer for it to have an aux chord option as well. Thanks for all the help!
turntable:https://store.uturnaudio.com/products/orbit-plus-turntable

preamp:https://www.amazon.com/ART-DJPRE-II-Preamplifier-Switchable/dp/B000AJR482/ref=sr_1_13?ie=UTF8&qid=1473115290&sr=8-13&keywords=preamplifier amplifier:https://www.amazon.com/gp/product/B0049P6OTI/ref=oh_aui_detailpage_o05_s01?ie=UTF8&psc=1 speakers:https://www.amazon.com/gp/product/B002RMPHMU/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/sensual_maths · 3 pointsr/audiophile

I've got a pair of Elac UB5s driven by an Emotiva A-300, been running my PC through my Yulong DAC into my system which was worked out nicely using the volume controls on my PC

I've just bought a new TV and would like to hook it up to the system as well for movies and gaming, except I don't currently have a pre amp for volume control. How high end do I need to go here? I've been looking at a cheap option like this: https://www.amazon.com/Nobsound-Fully-Balanced-Single-Ended-Pre-Amplifier-Controller/dp/B01M4I9EOK/ref=cm_cr_arp_d_product_top?ie=UTF8 with very basic volume control, but I know pairing it up with another Emotiva component, like the PT-100 pre amp is going to be superior https://emotiva.com/products/pt-100 .

Question is, how superior are we talking here? Will shelling out an extra $250 bucks be worth it in this case? I have to imagine the answer is yes, but can anyone tell me why? (Besides. obviously, quality components etc...)

Thanks!

​

u/kalehulk · 3 pointsr/OLED

I’m in the same situation with an older receiver (hdmi 1.4) and a LG 4K Oled. The receiver supports TrueHD, DTS MA, etc so I wanted to extend its life.

I picked up a hdmi audio extractor from Amazon. The shield goes into the extractor, then it splits the video and audio with 2 hdmi outputs. It sends 4K HDR @ 60hz to the TV and bitstream audio to my receiver. It works very well, but occasionally has a handshake issue and I need to power cycle the extractor. Still worth it since it works very well otherwise. Also, make sure to use certified 18Gbps hdmi cables, I used monoprice cables (also on Amazon)

https://www.amazon.com/dp/B0755TB82Q/ref=cm_sw_r_cp_apip_woxeBT1Oz9ZOR

Hope that helps!

u/ShortFuse · 3 pointsr/ShieldAndroidTV

Shield to Receiver to TV is the correct setup.

ARC is limited to basically uncompressed stereo or digitized (compressed) codecs. That would be Shield to TV to Receiver. Avoid this, since eARC (which supports higher bandwidth) isn't readily available yet.

The second HDMI cable to output stuff from your TV (like the built-in Netflix) at uncompressed audio. I've honestly never seen this supported personally, and if you have no interest in using the TV's built-in apps, then don't bother.

Edit: In some cases, you have a receiver that doesn't support the video stream you want. For example, my receiver does 7.1 PCM, but not 4K HDR. So, for my PS4 Pro, I split the audio and video with a 4th device. The audio goes to the receiver, and the video to the TV.

u/bballbuck · 3 pointsr/AVexchange

http://www.amazon.com/Bellari-VP130-Preamplifier-Headphone-Amplifier/dp/B002TD4GME

Is that what you are selling? If so, its $20 cheaper on Amazon than what your are asking for.

u/tgillly · 3 pointsr/vinyl

I recently upgraded from an LP60 to a LP1240 (secondhand) and I've been seriously underwhelmed and am having problems.

The LP60 sounded crisper with cleaner sound which shouldn't be the case for a much more expensive table with a cartridge costing more than the previous table all together.

The 1240 wasn't nearly loud enough so I had to add a preamp, I know there is a built in one but after trying every possible Line/phono config it still was't giving me the volume the LP60 had.

Also I am getting a loud hum which I can't seam to figure out. I attracted a ground wire from the turntable to the preamp which reduced hum but is still prevalent. I'm almost positive this hum is stemming from the turntable itself as when I used the LP60 with the amp there was no hum whatsoever and the hum is still there when the preamp isn't connected.

Video of hum

Setup:

Turntable

Amp

Pre Amp

Headshell

Cartridge

Speakers

​

​

u/GrendelA · 3 pointsr/sanantonio

Have you bought a pre-amp. A lot of the old recievers had amps installed for turntables, but the new ones do not. If you can barley hear it, you should get one, it was the issue w/ mine, and now it works perfectly.
You can find them at Sam Ash, or Guitar Center. Looks like this: http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_1?ie=UTF8&qid=1419267386&sr=8-1&keywords=pre+amp+for+turntables, or this: http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_1?ie=UTF8&qid=1419267386&sr=8-1&keywords=pre+amp+for+turntables

edit: nevermind, saw that you have a standalone console...

u/doubleclick · 3 pointsr/vintageaudio

It isn't the speakers. If they sound okay with your iPad, they should sound okay with the turntable. If the tt RCA cord is removable, try a different cord. Also, make sure the record you are using is in good shape, or try another one if you can. Another option is to plug some headphones into the amp, and see if that reproduces the crappy sound. Lastly, you can spray de-oxit electrical contact cleaner onto the phono contacts to clean them. Let it dry (a few minutes tops) and try again. If your phono input is dead, you can get one of those external phono inputs and run it through an aux or tape input.

u/Valgrindar · 3 pointsr/vintageaudio

Jim knows what you're looking for, OP.

I've found the parts you'll want to get as well. It's definitely a real budget set up, but it'll get you started.

Phono preamp

Patch cable (from phono to iHome)

Just plug the turntable into the phono input, then use the patch cable to go from the phono's output and into your iHome, and you're good to go.

u/solospkz · 3 pointsr/techsupport

Not sure if this is what you need, but I read some information that different "generations" of audio equipment can require a preamp. I hadn't owned a receiver/amplifier for quite a while and still haven't added a turntable.

https://www.amazon.com/Turntable-Preamp-Preamplifier-Amplifirer-Control/dp/B004MIY372

u/techfish · 3 pointsr/audiophile

Those speakers look tight! I would go with the Pro-Ject turntable and purchase a sub later. You can also check out the Essential line if you don't want to pay $400 for a TT. That would give your pre amp budget a little more weight. Maybe something like this.

u/Leontinthepro · 3 pointsr/vinyl

Thank you. Yes the Thriftshopping is not such a viable option for me here in Sweden. There is one store I know of but I dont know if its a good idea to wait once in a blue moon when a good turntables gets sent in. Im not even sure what old turntables would be a great find or what level of equipment suits me. I couldnt weigh the pros and cons with my knowledge so to speak.

Its really confusing too, going around forums and looking at reviews. One minute someone says the Debut Carbon is the best for its price range and eliminates vibration with its tone arm, bla bla. The next minute I find someone saying its barely an OK purchase for the price and sounds terrible in the mid range. Then I just feel that maybe its not such a good purchase, its like every review changes my view so easily ;^D

But if there is a good online store for vintage equipment, at least in Europe, then I could look around there. But I dont know of any good sites.

Also wouldnt it be enough to have a Phono Amp so that I wouldnt need a pre amp? https://www.amazon.co.uk/dp/B007DB5I60?psc=1&smid=A16D1Q3U7G1XSE This item seems of the same brand and a bit more expensive, but there are no reviews and I again have no idea whats better about it, what would you say?

u/DieselWang · 3 pointsr/audiophile

Gotcha. You need a phono preamp. From your discussion about 4K receivers, I assumed you needed a preamp for an amplifier.

The Schiit Mani is popular: http://www.schiit.com/products/mani
Emotiva makes great products as well: https://emotiva.com/products/xps-1
Cheaper than the other 2 is the ProJect Phono Box: https://www.amazon.com/Pro-Ject-Audio-Phono-preamp-output/dp/B007DB5I60v

u/elcheapodeluxe · 3 pointsr/hometheater

I would be very hesitant about running something as weak as a phono signal that distance. At very least make sure you use a phono pre-amp near the turntable and plug into a non-phono input at the receiver. I would consider something like a Sewell Sound Link - but I'd definitely use the phono pre-amp before sending through that and use the non-phono input on the receiver.

​

The extender:

https://sewelldirect.com/products/sound-link-al10-rca-3-5mm-over-cat5e-6-2000ft

There are obviously much better phono preamps - but this would be bare minimum.

https://smile.amazon.com/Behringer-Microphono-PP400-Ultra-Compact-Preamp/dp/B000H2BC4E/ref=sr_1_6

Something like these would be better:

https://smile.amazon.com/Pro-Ject-Audio-Phono-preamp-Output/dp/B007DB5I60/ref=sr_1_14

or

https://smile.amazon.com/Schiit-Mani-Phono-Preamp-Cartridges/dp/B07P8WYX6N/ref=sr_1_11

u/GrandWj · 2 pointsr/vinyl

You need a phone preamp (this boost the weak signal out of a turntable). The u shaped wire is the ground wire and will go on a screw on the phone preamp. They can be bought for $20.
https://www.amazon.com/dp/B004HJ1TTQ/ref=cm_sw_r_cp_apa_DopGAb95H4972

u/Freezerburn · 2 pointsr/audio

Hmm so RCA phono in and 3.5mm jack out.. The speakers are amped and have a volume control. So you need a phono stage cause all turntables need them to get your analog audio to line level. I assume you're trying to save money so we won't get serious. This Pyle should do the job

https://www.amazon.com/Pyle-Phono-Turntable-Preamp-Preamplifier/dp/B004HJ1TTQ

From the pyle you'll want an RCA Male to 3.5mm Female cable. This should do it.

https://www.amazon.com/Monoprice-Premium-Stereo-Female-Plated/dp/B003L14XTO

EDIT: OH looks like the Logitech speakers have an RCA input! So you don't need a converter. So this monoprice rca between the phono pre and the Logitech should work. Let me know if I'm wrong, cause if it doesn't have RCA input then you'll be going back to RCA to 3.5mm converter.

https://www.amazon.com/Monoprice-1-5ft-Premium-22AWG-Cable/dp/B003L1717K

If you need the RCA interconnect between the turntable and preamp.

https://www.amazon.com/Hosa-CRA-202DJ-Ground-Stereo-Interconnect/dp/B000PO1H80

Personally I'd get a good integrated like a yamaha, that's more in the direction of best way and hook it up to some nice floorstander towers or bookshelf speakers like Klipsch, Elac, and so on.

u/ZeosPantera · 2 pointsr/hometheater

You will likely need a phono pre-amp that allows you to plug your turn-table into the receiver via normal RCA inputs.

Cheapest speakers are the Dayton B652's. ($40/pair). After that you double your budget to the Micca MB42X's ($80/pair). After that you go big and go with the Fluance SX6's ($130/pair)

u/ibluestone3 · 2 pointsr/audiophile

Hi Reddit,

I am not yet an audiophile, but have been doing some research as I'm inheriting a hi-fi system comprised of the following:

-Luxman M-113 stereo amplifier

-Luxman M-120A stereo amplifier

-Counterpoint SA-5000 Preamplifier with power supply

-2 VPMS RM1 speakers (8 Ohms)

-Pro-Ject Audio Debut Carbon turntable

I live in an apartment, so it is completely unrealistic to keep all this gear. I have the option to keep/buy more/sell existing hardware however I see fit in order to achieve the following two goals:

  1. Ability to stream via Bluetooth audio from a record on the turntable to the VPMS RM1 speakers on the other side of the living room. I don't mind minor quality degradation due to bluetooth, but absolutely cannot run wire and the turntable will not be placed near receiver.

  2. As small of a hardware footprint as possible. System does not need to be loud.

    After some research I have found these three products - will they, in combination, allow me to achieve my goals? Maybe I'm on the right track but chose terrible hardware?

  3. A turntable preamp which the Debut Carbon will go directly into - something like https://www.amazon.ca/Pyle-Pro-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_2

  4. Bluetooth audio transmitter which the preamp will out to - something like https://www.amazon.ca/Bluetooth-Streaming-Esinkin-Wireless-Receiver/dp/B016NUTG5K/ref=pd_ybh_a_4

  5. Bluetooth compatible audio receiver - something like https://www.amazon.ca/Pyle-Pro-PDA5BU-Bluetooth-Amplifier-Readers/dp/B00LI4L1LO/ref=sr_1_4

    Also if anyone has any idea how much those amps & preamps might be worth used please let me know. I would probably lean towards keeping them in storage though, so I can appreciate them when I have room to actually have them out. The turntable and speakers I can keep as is I probably?
u/Aco2504 · 2 pointsr/BudgetAudiophile

If your turntable doesn't have a phono amp, you'll need one. While I won't go deep into detail, if you take the audio out of a turntable without a phono amp into a normal amp, it'll be quiet and weird.

Could be something as cheap as this:
https://www.amazon.com/Pyle-Phono-Turntable-Preamp-Preamplifier/dp/B004HJ1TTQ/ref=mp_s_a_1_3?ie=UTF8&qid=1543260861&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=phono+preamp&dpPl=1&dpID=51SGsJ%2BNdGL&ref=plSrch

From there, you'd go into your powered monitors, preamp/amp/passive speakers combo, or AV receiver/passive speakers.

Edit: sometimes, preamps and receivers have their own incorporated phono amps, but if so, it'll be clearly stated on their specifications.

u/nevermind4790 · 2 pointsr/vinyl

It appears that the Stanton D61 is another name for the 6xx series. Source You could get a generic stylus for that, for $50 or under. New carts in that price range aren't going to be any better.

For a preamp, they can start as low as $20 for a Pyle. If you can spend a little more, I recommend the ART or its USB counterpart.

u/fritobugger · 2 pointsr/BudgetAudiophile

You might be able to find something used on craigslist or a thrift store but nothing new that has a phono stage in an amplifier. You best bet is a super cheap phone pre-amp and a cheap amp. Such as the following two items:

https://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ

https://www.amazon.com/SMSL-50Wx2-TDA7492-Amplifier-Adapter/dp/B00F0H8TOC

u/Costco1L · 2 pointsr/audiophile

Yeah, it will literally say phono (sometimes specifying what type of cartridge, MM or MC). Or you can buy a specific phono preamp, which will then go into that input.

This is the cheapest I could find (and the only one less than $50): https://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ

It should sound OK but the reviews imply it has a tendency to break.

u/psychojeremy · 2 pointsr/BudgetAudiophile

You'll have to check craigslist or something. You need a phono preamp, an amp, and speakers.

Alternatively, you'll need a phono preamp, and active monitors

or an amp with phono input, and speakers.

http://www.ebay.com/itm/Yamaha-RX-395-2-Channel-Stereo-Receiver-Amp-Phono-Turntable-Input-AM-FM-Black-/282297973948?hash=item41ba453cbc:g:hzIAAOSwnHZYXqIl

something like this, and some junk goodwill speakers, and speaker wire are already over your budget.

the cheapest amazon stuff:

https://www.amazon.com/Lepy-LP-2024A-Amplifier-Stereo-Supply/dp/B00ULRFQ1A/ref=pd_sim_23_2?_encoding=UTF8&pd_rd_i=B00ULRFQ1A&pd_rd_r=K7NZC8MT9NE3WJGEDS7R&pd_rd_w=oS56N&pd_rd_wg=UDEDg&psc=1&refRID=K7NZC8MT9NE3WJGEDS7R

https://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_3?ie=UTF8&qid=1482864764&sr=8-3&keywords=phono+preamp

https://www.amazon.com/Dayton-Audio-B452-Bookshelf-Speaker/dp/B00Q3MF9YQ/ref=sr_1_8?s=aht&ie=UTF8&qid=1482865038&sr=1-8&refinements=p_n_feature_two_browse-bin%3A2494592011

You'll also need rca cables and speaker wire. This will be above your budget and wont be very good. Pyle is a POS. If you double your budget you can have a much, much, much better sounding system.

The bs22s are 89.00$ right now and are a steal. That plus a goodwill amp with phono input will be far superior to the lepai pyle and dayton audio.

Local used is your best bet.

u/iDislocateVaginas · 2 pointsr/vinyl

Thanks again for the advice.
I just bought the SL-D202 TT and two Boston Acoustics A40s speakers (8 ohms)
But i didn't take the receiver. Do you think the below one would work and work well with the preamp posted below it?

http://www.amazon.com/Sony-STRDH130-Channel-Stereo-Receiver/dp/B006U1VH2S/ref=sr_1_1?ie=UTF8&qid=1451673316&sr=8-1&keywords=receiver

http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=cm_cr_pr_product_top?ie=UTF8

u/qaruxj · 2 pointsr/hometheater

Some preamps (such as this one) do have 1/4" outputs, so you could get a 1/4" to 1/8" adapter and plug your computer speakers into that.

According to one review of the Pioneer turntable, it does have a built-in preamp, so it appears that you don't need one. The phono EQ is explained in the section on RIAA equalization in the article that I linked. Since you're probably buying a turntable with a built-in preamp, that means that all you really need is a female RCA to female 1/8" adapter, such as this one.

u/dr_torque · 2 pointsr/audiophile

You need a phono stage, cheapest that I know of.

u/chickadeeshits · 2 pointsr/vinyl

I have just purchased my first turntable, a Technics SL-B2, from eBay, and it will be here in ten days. So now I have ten days to put together a preamp +amp +speaker set-up-thing that really freaks me out. Which leads me to my questions for y'all...


Option 1

Right now I have these things in my amazon cart. I'm really just trying to get my feet wet with this stuff (without breaking the bank), but I don't know if these things go together/would work as a whole. My main worry is the fact that I have no idea how to do a ground wire... I'm relatively confident that I could connect the TT to the preamp, and the preamp to the amp, but from there I'm lost (any advice would be welcome).


Option 2

This is a craigslist entry somewhat-local to me (about 1.5 hours away), that came up when I typed in "phono receiver". Is this a preamp, amp, and speaker all in one? Is it too good to be true? How would this then connect to the TT?

Background

Having already purchased the record player, I'm hoping to keep the rest of the set-up below $120, and preferably closer to $80. I understand these are very slim margins, but my hope is to start with the bargain-basics, and to then (hopefully) upgrade piece-by-piece with the coming-Christmases and Birthdays.

Also, given that I do plan to upgrade my set-up in pieces, I'm leaning towards Option 1 because it seems it would be easier to swap out parts over time...

Overall

I'm just hoping for general advice, well wishes, whatever y'all can give me. I've done a lot of research but without all the parts in my hands I just can't visualize putting it all together, and could use y'all's experience. Really, I'm just itching to finally play some records!

Please help! And thanks in advance:)

u/itisrocketscience · 2 pointsr/vinyl

That's the platter. They normally have a rubber mat on them. Damp lint free cloth can clean it easily.

Yes, if you don't know how long it's been on it, replace it.

If you don't have the money, getting the Behringer or Pyle Phono preamp is sufficient. They're pretty cheap on amazon.

If you can swing get the art dj preII.

u/mattrva · 2 pointsr/audiophile

I would suggest a Cambridge Azur 551p Pre Amp.

u/[deleted] · 2 pointsr/audiophile

I am running my turntable into a Schiit Valhalla 2 and it works great. Schiit is also releasing a phono pre-amp next month called the Mani which I plan on replacing my internal pre-amp with. /u/mattrva has suggested the Azur 551p Phono Preamp to me as an alternative.

u/WhollyJeans · 2 pointsr/vinyl

Okay. The mixer ...I'm thinking maybe your mixer is a bit "vintage"on this? Look to see if it has a switch that will accommodate ceramic or magnetic phono cartridges. Way back in the dark ages of early HiFi most record players had ceramic cartirdges ....these things put out a much higher signal than a magnetic cartridge ....and as such didn't need as much pre-amplification. I have an old Radio Shack small mixer that I think has a "Cer/Mag" switch on it. Make sure the switch is in the "MAG" position.

If there isn't a switch then the mixer preamp is probably okay with a magnetic cartridge. What kind of cartridge do you have on your TT? There are two kinds of magnetic cartridges: moving magnet and moving coil. Moving coil cartridges put out a much lower signal than a moving magnet and typically require a specific preamp able to handle them. Then again ...on your mixer ...is there a switch labelled "MM/MC"? If it's in the "MC" position flip it to the "MM" position.

Make sure the channel you have the TT assigned to is set for phono ...some mixers have a "Line/Phono" selector.

And then in the end, the preamp in the mixer might just be toast.

As for a preamp? I would recommend getting one of these:

http://www.amazon.com/Cambridge-Audio-Phono-Preamplifier-Black/dp/B007A0CYCK

Or it's predecessor, which I have:

http://www.amazon.com/Cambridge-Audio-540P-Preamplifier-Silver/dp/B001052KDE/ref=cm_cr_pr_product_top?ie=UTF8

Hope this helps ....

u/cyfyr · 2 pointsr/vinyl

Turntables produce very low output, and need a preamp to amplify the signal to line level as well as to undo the RIAA equalization curve. You're going to need one depending on your turntable, some of them have built in phono preamps. The Schiit Sys is basically an input switcher and isn't what you need. You're going to be looking for a device called a phono stage or a phono preamp. Some examples:

https://www.amazon.com/Behringer-PP400-BEHRINGER-MICROPHONO/dp/B000H2BC4E

https://www.amazon.com/ART-DJPRE-II-Preamplifier-Switchable/dp/B000AJR482

https://www.amazon.com/Pro-Ject-Audio-Phono-preamp-output/dp/B007DB5I60

u/PhaedrusTheSquatch · 2 pointsr/vinyl

Thanks in advance!

Recently bought the U-Turn Orbit without a built in Pre-amp. I'm between just ordering the Pluto or the [Pro-Ject Phono Box] (https://www.amazon.com/gp/aw/d/B007DB5I60/ref=mp_s_a_1_13?ie=UTF8&qid=1485282591&sr=8-13&pi=AC_SX236_SY340_QL65&keywords=phono+preamp). Pro-Ject is $10 more, but might come out cheaper with amazon prime.

My question - which would be my better route? Or are they basically the same and I should just go with the cheaper one?

u/nomnommish · 2 pointsr/audio

If you want to manage 3-4 inputs, you will be better off getting an AVR. Accessories4less has really good prices and options.

An AVR will let you switch between multiple sources - whether they are HDMI video sources (gaming for example, or Roku) or digital audio sources, or analog audio sources. Besides this, an AVR will also amplify the signal, and also has an inbuilt DAC, so you can hook up passive speakers that are a lot less expensive than powered speakers. For example, you could hook it up to Pioneer BS22 bookshelf speakers for $130, or buy the FS52 floorstanders for $250 a pair (in which case you will not need a separate subwoofer)

Most entry level AVRs will not have a phono preamp. Assuming your TT does not have an inbuilt phono, you will likely need to buy a separate one. You can buy a Rolls VP29 for $50 from Amazon, or if you want to spend more, you could buy Schiit Mani or the Pro-Ject Phono Box - both sell for $130.

AVR plus speakers plus phono - you could still pull this off for under $500 and get decent sound quality. You can also look at used AVRs - they can often be had for half price or less (especially if they are slightly older - as AVRs are all about latest and greatest features - so now, AVRs that do not support 4k will sell for steep discounts). Look at usaudiomart for example.

u/A_wicked_tale · 2 pointsr/NintendoSwitch

That depends on what you mean. Do you want it to be on the speaker system automatically when Docked? and What kind of input does your speaker system have, a standard headphone Jack?

If the above is the case you'll need something like this, as well as an adapter like this one

u/Kichae · 2 pointsr/NintendoSwitch

I highly recommend picking up a couple of HDMI audio extractors, e.g. https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072 They come in handy in situations like yours.

u/rusenikolovski · 2 pointsr/NintendoSwitch

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

it would work, but plugging in would disable the audio output via hdmi.

you have as in the link spliters with any combination you need.

u/bean72 · 2 pointsr/ShieldAndroidTV

I’ve tried getting that specific sound card to work with android without luck as there wasn’t proper drivers for it, it was an older android version (jellybean) so YMMV. There are USB to optical sound sound card that are capable of running on android though.

Would something like this work instead, or do run into the same limitation that your TV has?
https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072

u/TheImmortalLS · 2 pointsr/BudgetAudiophile

a possible config would be hdmi source --> hdmi in, L/R stereo out --> RCA stereo in, 3.5mm out --> 3.5mm line level input, sound out

another with powerful speakers would be hdmi source --> hdmi in, L/R stereo out --> RCA in, 100W powered speaker wire out --> 100W, 50W rms unpowered speakers

u/Brendanahlers · 2 pointsr/xbox360

I'm surprised nobody mentioned this. Get an HDMI audio extractor. HDMI in, rca and HDMI out. You might be able to find one with a headphone jack instead of rca. If not, you can always get an rca to 3.5mm adapter.

Much, much easier and cheaper than a receiver. Not sure why someone suggested that.

https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_api_1nH7xbXTVVXSV

u/SOSpammy · 2 pointsr/gadgets

You could get something like this to extract the HDMI audio and send it out through optical.

https://www.amazon.com/dp/B00KBHX072/

u/phillip_u · 2 pointsr/sonos

You could try something like this:

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

It splits the audio out from the source so you can get surround sound.

Not sure how compatible this specific unit is with the Playbar, just pointing to it as a concept of another approach to getting the audio quality you desire without buying a new display.

u/super_not_clever · 2 pointsr/audio

Correct, it is an input, not an output. Therefore, if you want to get sound out of whatever device you are plugging in, like your XBox, you'll either need to get lucky and have another type of audio out from your device, like Optical or analog RCAs, or you'll need to strip the audio out of the HDMI with something like this.

I have not used that particular model, so I can't guarantee whether or not it'll work for your situation. I recommend looking through the reviews to see if anyone else has a similar situation to yours.

u/mail4youtoo · 2 pointsr/rocksmith

Some like this may work as well ViewHD HDMI Audio Extractor for both your PC and Xbox

u/McShizzL · 2 pointsr/miniSNESmods

My monitor doesn't have a 3.5 out for sound, so I use something like this: https://www.amazon.com/J-Tech-Digital-Premium-Extractor-Converter/dp/B00BIQER0E/

It works well enough. I use it for all my hdmi devices: Wii U, PS4, Firestick, SNESClassic.

This is the actual one I bought:
https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072
But the one I posted before has better review ratio.

My biggest complaint is that is plugs in with a powerjack that needs to take up multiple slots. It would be swell if it were USB powered. Let me know if you have any questions?

u/1369ic · 2 pointsr/audiophile

How about an HDMI splitter like this? It looks like you could take the HDMI input and split it off, extract the audio through the s/pdif or RCA jacks and run that to the speakers.

u/tikael · 2 pointsr/Chromecast

You could use something like this to split out the audio signal from the chromecast, but that is a bit expensive for just doing that.

u/IzeBerg · 2 pointsr/PS4

This is probably your best bet. They also make audio extractor boxes that hdmi goes in and out (assuming your monitor is hdmi and not dvi) like one of these https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072 (I cannot vouch for this one specifically)

u/carlmmii · 2 pointsr/Twitch

Just search amazon for HDMI audio extractor, you'll find a bunch of listings for $25-$35 that just do simple HDMI passthrough with optical+RCA/3.5mm audio. This one looks like it would do the job just perfectly.

There's also a whole market of HDMI switchers that support audio extraction as well. This is one we use, $70 for 6in/2out with selectable audio output... just as an example of what's out there for reference.

u/ctfrommn · 2 pointsr/BudgetAudiophile

Ive never seen a speaker with HDMI in but adapters from HDMI to Toslink (and likely other formats) are readily available.

u/turtle_mummy · 2 pointsr/fireTV

There are HDMI audio extractor boxes for just this purpose. Fairly inexpensive too, here's the first one I found:

ViewHD HDMI Audio Extractor | Optical Toslink + L/R Stereo Analog Converter Outputs | VHD-H2HSAs | Support Amazon Fire TV, etc https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_apa_y-2-ybYVR27H5

u/jthmeffy · 2 pointsr/Chromecast

I assume he means he wants something that splits the hdmi signal into digital video (hdmi/dvi) and analog or digital audio (3.5mm jack or optical).

And yes, there is such a thing.

u/mapin · 2 pointsr/Chromecast

True. You can use a cheap toslink extractor / hdmi pass-thru if you want the option to run the Chromecast for audio without the TV on.

http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

u/niceflipflop · 2 pointsr/techsupport

Great question.

Now that I'm in front of my computer, I found the manual for your specific modules.

You can see where the input port leads to a wall plate module with standard RCA inputs (among other things). You're basically doing the same thing, only with a much more simple module that only includes RCA. And obviously, it's not installed in a remote location. It's just hanging there in the closet.

You've also got a secondary distribution module, but from what I can tell, it's daisy-chained to the first via the 'Cascade Out' port, and it's just because they needed one more speaker output.

What's important is that you'll see in that diagram that the input jacks are clearly accepting a 'line-level out'. That's another term for 'pre-amp'. Higher-end receivers have a set of outputs that bypass the amplifier so that you can provide a clean audio source to another system, like the OnQ.

Unfortunately, your Sony doesn't appear to have line-out. I have a Yamaha that's pretty much the exact same unit. I was also frustrated by the lack of line-out jacks. I needed them for some wireless speakers.

There's definitely devices out there that convert speaker-outputs to pre-amp. They were particularly common back in the day for car stereo installs, because people wanted to add aftermarket amps/woofers to their stock systems and needed an unamplified signal to work with.

But they're not ideal because they introduce noise. It's just not a very clean signal.

It would seem odd to me if someone had a pricey whole-house system like this, only to provide it a muddy audio source via a line-out adapter. But it's doable, I'm sure.

Here's an option...

If you plan to use the Sony as a switcher for TV sources, and you want the house speakers to just play whatever is on your TV, you could tap into the HDMI output on its way to the TV, using one of these.

It's what I used to push the TV audio to the wireless speakers and it worked like a charm. HDMI output isn't amplified, so it satisfies what you need for the OnQ, as well.

Of course, you'd either have to keep all your sources in that closet with the receiver and run an HDMI all the way to your TV. Or keep all that in the living room and run a long RCA cable into the closet.

Here's the catch...

I'm betting anything that like my Yamaha, the HDMI can only output HDMI sources. So this won't let you route, for instance, your iPod connected to your Sony into the OnQ. But if you listen to online music via Chromecast, FireStick, Roku, etc., then this could totally work for you.

u/Aislinx · 2 pointsr/headphones

if i understand your problem correctly, you'll need a hdmi DAC, try this:

https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072

u/Dusky1103 · 2 pointsr/hometheater

Hi Blotto, thanks so much for replying me.

You see, I have bought this converter ( https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_api_bpWwybKCG3AWP ) over at Amazon, which specifically states that it has the capability to receive Dolby Digital 5.1 over HDMI and output it over SPDIF.

Now, I'm 100% sure that this converter does not feature Dolby Digital Live! However, if I were to use my PS4 for instance, and send a full 5.1 signal over HDMI to this converter, will it extract this 5.1 in Dolby Digital?

Likewise for the Samsung KS8000, it claims that it can receive a HDMI 5.1 input. And all the optical out does is transmit that same 5.1 input. Pretty sure the KS8000 does not have DDLIVE! either.

In both cases, why do I still need DDLIVE if I can send over a 5.1 signal via hdmi and extract the same 5.1 to toslink? Regards

u/karl_w_w · 2 pointsr/pcmasterrace

Run HDMI from your video card to an audio extractor like this one (it has HDMI passthrough if you're already using HDMI for video)

u/penguin_with_a_gat · 2 pointsr/cableadvice

the RCA ports are input only, you need a breakout box between the source (chromecast) and TV. http://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

u/radiodoggy · 2 pointsr/Chromecast

Same thing happened to me. I bought this gizmo on Amazon, and it took care of the problem. $27 - Check it out: http://www.amazon.com/gp/product/B00KBHX072/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/bradgsanford · 2 pointsr/androidapps

I got this:

http://www.amazon.com/gp/product/B00KBHX072/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

I'm sure there are other options, but this one has worked out well for me.

Prior to this setup, I was using a Mac mini hooked up to the stereo and while it was fine, it wasn't something I could just hit a button and start playing. With this chromecast setup and a remote app on my phone, I can do it all from the couch. Exactly what I've been wanting for the last several years.

u/Zinterax · 2 pointsr/NintendoSwitch

Having an issue using an hdmi switch + audio extractor and wanted to see if anyone had some ideas.

Currently I'm using this 5 port switch which then outputs to this audio extractor which is then fed into my PC for listening. This works perfectly for my PS4 but I get no audio when the switch is docked.

u/b4bl4t · 2 pointsr/htpc

I had the same issue with my NUC.
Get a splitter: http://www.amazon.com/gp/aw/d/B00KBHX072/ref=redir_mdp_mobile/187-6190964-7898448

It splits hdmi with audio to separate hdmi video and spdif.

Works with 5.1 ac3 and dtsas long as you pass encoded audio, works for me with xbmc (aka kodi) and vlc.

u/matt314159 · 2 pointsr/fireTV

You will have to somehow split the FireTV Stick's audio out of the HDMI signal. They make things like that, for instance this one I just found on a quick search: http://amzn.com/B00KBHX072

That said, if you're spending $39 on a FireTV stick and another $30 on a box to split the audio out, you might find the full FireTV to be a better value.

u/mr_easy_e · 2 pointsr/audiophile

Good to hear that the Fluance speakers are good. I'd definitely consider them when I eventually upgrade mine.

My setup is a bit of a hodgepodge of things I've gathered over the years from various sources. Other than the Fluance TT

--Anthem AVM 50 Processor
I got this from my dad from his older home theater setup. Definitely a little overkill for my 2-channel home theater system, and it has some HDMI switching issues, but it's otherwise a sturdy beast.

--Adcom GFA-535 Stereo Amp
I also go this from my dad from a previous generation of setup that he had. It's not rated as super powerful, but it's got plenty of power for my apartment.

--Energy C-500 floorstanding speakers. Couldn't find much info on these online, as they have been discontinued, but they were fairly decent budget speakers that I got in college. They will be the next thing I'd upgrade.

--Emotiva Phono Preamp
I just ordered this pre-amp to see if I could improve the internal one. It arrived yesterday and I haven't had the chance to plug it in yet, but I'll let you know if I notice a difference.

u/amagerbro · 2 pointsr/vinyl

Totally new to vinyl, and having trouble tracking down an issue where the right channel cuts out unexpectedly. It will either not work from the start, or work for a time then pop and the right channels cuts out.

So far I've tried using different cables, swapping L/R channels, using different receiver inputs, using 2 different preamps, all with the same result. Basically, I'm concerned that it's a problem with the table itself, but I don't even know where to start troubleshooting that. Still under warranty of course, but I'd like to do my due diligence before going that route. Basics of the setup are below.

u/SeymourKnickers · 2 pointsr/turntables
  • Best cheapie gets the job done well.

  • My favorite semi-cheapie. I personally won't spend more than this on a moving magnet cartridge phono preamp, but your mileage may vary.

    I must say you have picked a very nice cartridge for your setup. Cartridges and speakers are where money spent can be most obviously heard.
u/ImaginaryCheetah · 2 pointsr/BudgetAudiophile

i would consider looking into a new cartridge for the phonograph, i'm sure the needle is super old.

i believe that is a wear part for record players? if you can't tell i'm not an expert :)

and possibly spending the money to have it cleaned and balanced(?) i took my folks' old record player to a music shop and it was like $50 to replace some belts and match up the balance on the turn table. seemed to really help.

-

if your receiver is already sounding poorly, i'd definitely spend the $30 on something like this:

https://www.amazon.com/GOgroove-Turntable-Preamp-Preamplifier-Adapter/dp/B00WNLIHJA/

then you only need a direct cable to plug the preamp into your sound card.

u/randy9999 · 2 pointsr/audiophile

what about something like this?

https://www.amazon.com/Yamaha-Component-Preamplifier-Silver-WXC-50/dp/B01EI6DQS4

I don't really do the streaming thing since I rip all my CDs onto my media player, but it seems like you are trying to use your iPhone (out of convenience) for doing something it's not really very good at doing...playing high quality music files.

Just a thought!

u/cashnmillions · 2 pointsr/BudgetAudiophile

For $5000 budget I would get the following: Do you want tower speakers or bookshelf?

Bookshelf I would go with Legacy Audio Studio HDs. $1800

Towers probably Focal 936. $2799

Amplifier I would go with a Yamaha AS801. $899

Streamer I would get the Yamaha WXC 50 music cast. $349

At $5000 you start getting into a lot of snake oil products in my opinion. That or more aesthetics than sound. Just know that sound "quality" is rather subjective. Meaning if it sounds good to you, it may not sound good to the next person. Good luck!

https://www.accessories4less.com/make-a-store/item/focalaria936dwa/focal-aria-936-6.5-3-way-floorstanding-speakers-dark-walnut-pair/1.html

https://hifiheaven.net/shop/Legacy-Audio-Studio-HD-Compact-Monitor-Speaker-(Standard-Finishes)?language=en&currency=USD&gclid=EAIaIQobChMIisCV2IiC5gIVx0XVCh27rgfbEAkYAiABEgLSefD_BwE

https://www.crutchfield.com/S-e53BZxaLjcb/p_022AS801B/Yamaha-A-S801-Black.html

https://www.amazon.com/Yamaha-Audio-Component-Preamplifier-Silver/dp/B01EI6DQS4/ref=mp_s_a_1_16?keywords=music+streamer&qid=1574572577&sprefix=music+stre&sr=8-16

u/diamondweave · 2 pointsr/BudgetAudiophile

This one looks exactly the same and is only $34

https://www.amazon.com/gp/aw/d/B01HEQJGPC?psc=1

Got great reviews too.

u/prymortal69 · 2 pointsr/HeadphoneAdvice

Schiit Modi3/Magni3, Topping Dac, Topping Amp, Objective2 + Odac & The Element (Bstock still good, just cheaper)
HD6XX i found overall its more the music type than the hardware source that makes them sound bad. They & the other headphones all work with everything above no issues.

u/beepboopblorp · 2 pointsr/vinyl
u/pragu · 2 pointsr/AVexchange

I've got an Art Pro DJPRE II lying around,shoot me a pm if you're interested!

u/cccastaneda007 · 2 pointsr/vinyl

Depending on it's condition, you could probably sell the electrohome for $60-$100.

You can get a good used turntable for $20 or less. Just check out craigslist, thrift stores, yard sales etc. It's fun and it's cheap. I recently purchased a Realistic Lab 290 TT for $20. Phono Pre-amps are also fairly cheap. I got mine for $50 but there are cheaper one's out there.

It doesn't take very much time or money, you get a better listening experience, and you protect your records. Trust me it's worth it.

u/Gee_Golly · 2 pointsr/DJs
u/chilighost · 2 pointsr/vinyl

I'm wondering if I can get some help/advise in regards to speakers for my Fluance RT81 that is currently on order. I have narrowed it down to these two sets: Fluance Signature Series Bookshelf Speakers: https://www.amazon.com/dp/B01A5UB4JU/ref=twister_B01BKWQW3A?_encoding=UTF8&psc=1

Klipsch R-15M Bookshelf Speakers: https://www.amazon.com/Klipsch-R-15M-Bookshelf-Speaker-Pair/dp/B00LMF41IY/

Both seem to be passive speakers so I would need an amp as well apparently. I don't plan to connect them to a AV receiver - just the turntable and speakers. Can anyone recommend a good amp for this setup? I found this one on Amazon (https://www.amazon.com/ART-DJPREII-Audio-Turntable-Preamplifier/dp/B000AJR482/) which seems to get decent reviews.

I am new to vinyl but I want speakers that have some good bass to them (without a sub) since I won't be connecting to a receiver. Which of these speakers will provide the best highs and enough bass?

Any recommendations would be helpful - thank you!

u/Sallywallykingslayer · 2 pointsr/hometheater

I use a Art DJ PRE II , it's ok way better than built in pre amp. I'd say worth the mod if you have prior soldering experience.

u/revjeremyduncan · 2 pointsr/audiophile

I also have the ART DJpreII preamp which is still, in my opinion, noticeably better than the internal preamp. The Mani was a nice step up from that, though, though.

I upgraded to the NAGAOKA MM (MP) Cartridge MP-110 cart, and could not believe the difference for only ~$100. I highly recommend it.

u/ducksarewitches · 2 pointsr/vinyl

Vinylengine.com is a great resource for reviews and manuals.

The Art DJPRE 2 is a good budget phono preamp.

https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

u/Yushatak · 2 pointsr/turntables

Ironically that's what I ordered shortly after posting, but I was still hoping someone would know of one with a signal sensing feature. For the money it seems like the best one around at like $33 for their basic model (https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482/ref=sr_1_1?ie=UTF8&qid=1493409453&sr=8-1&keywords=art+phono+preamp)

u/DonutsAndBass · 2 pointsr/vinyl

That budget ain't gonna work unless you go vintage, which is a lot harder but can be worth it. My recommendations for a new setup, as cheap as I could get it, would have to be:

U-Turn Orbit

DJ Pre II Phono Pre-Amp

Micca PB42X Powered Speakers

u/plazman30 · 2 pointsr/vinyl

Ordered this off of Amazon


ART DJPREII Phono Preamplifier https://www.amazon.com/dp/B000AJR482

Had a lot of great reviews from Amazon, YouTube and various Google searches.

u/Caswell64 · 2 pointsr/vinyl

You'll need a phono preamp between the record player and anything else, like this one. Other than that, you should be good to go, and remember to thank your parents for that Technics. It's a very high-quality turntable- you would need to spend several hundred dollars to get something that good new.

u/kb3pxr · 2 pointsr/vinyl

Okay, The best option would be TT -> Preamp (if not built into the receiver) -> Home theater receiver. Since you want to avoid the home theater receiver you will either need the whole kit. Easy Option: Turntable -> Pre-Amp -> High End computer speakers. Since some high end computer speakers have RCA aux inputs you are set.

Your second best option would be a second receiver (with a second set of speakers) for the turntable. Many receivers (especially vintage) of any decent quality will have the Preamp built in to the phono input. Unfortunately this will likely be outside of your budget (especially brand new) or time frame (especially used).

If you have good speakers on the home theater system and can turn off all the special processing, I suggest using a phono (rare) input on it or a pre-amp and a AUX input on it for the time being.

Phono pre-amps aren't that expensive on the low end and this example also includes a low pass (subsonic) filter to help protect your speakers: http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482/ref=sr_1_4?ie=UTF8&qid=1450557220&sr=8-4&keywords=phono+preamp

EDIT: changed Amazon Smile link to standard Amazon.

u/geauxwildcats · 2 pointsr/vinyl

Cheaper side (wouldn't go much lower than this price): ART-DJPREII

Higher end, but do-able: U Turn Pluto

u/fiftypoints · 2 pointsr/vinyl

Yes those speakers will work fine. Yes you will need a phono preamp. I recommend this one, but any phono preamp should work.

u/AM_key_bumps · 2 pointsr/vinyl

OK. Here we go.

At your price point and experience level we should stick with solid state. tubes are more expensive and potentially temperamental. your speakers are solid, vintage big box bangers. Your room may not be too huge, but you need to push a decent amount of air to get those speakers to sound good. So you need at least 50 watts per channel.

Vintage: when in doubt, go pioneer. they sound great, look awesome and are built like tanks. I would recommend either an SX-750 or SX-780. Anything lower on the food chain might not be able to get your speakers going, and anything higher is going to be out of your price range. The 780 is a slightly later model and might cost a little less, but with no real difference in performance (IMHO). Unfortunately, getting a specific model means looking on eBay. Some folks have gotten burned buying receivers on eBay, I myself have been very lucky. Just make sure the unit has been recently serviced, and that the seller has a positive feedback rating AND SELLS A LOT OF ELECTRONICS.

If you do not want to go eBay, that means thrifts/yard sales/flea markets. Just look for something clean that has the WPC you need (at least 50 as indicated above). Look for the usual suspects, Pioneer, Marantz, Sansui, Technics. Also keep an eye peeled for Sony, Harman Kardon, Kenwood, JVC, Aiwa, etc.

2 things to keep in mind when looking for a vintage receiver:

  1. Is it silver faced? It seems silly to judge a receiver on looks, but remember that silver facing was the style in the 70s, which was the golden age of hi-fi. When the faces started to turn black was when shit started to go down hill with consumer audio. Is every silver receiver good and every black one lousy? Not at all. But is this a good way to quickly get an idea about a receiver? Definitely.

  2. Is it heavy? This is another good method for quickly judging vintage audio gear. In general, light weight means bad.

    New: a great new receiver in your price range is the Onkyo TX-8255. Has the 50 WPC your speakers crave. Also has a built in phono preamp (which you need for spinning records) which most modern receivers lack. As it is new there is no sweating shady eBay sellers, or worrying about it dying 3 days after you hook it up. But most importantly, it has a decent, neutral sound. Amazon has it for around $200

    http://www.amazon.com/Onkyo-TX-8255B-TX-8255-Stereo-Receiver/dp/B001AMSPQI/ref=zg_bs_667846011_15

    Another nice new receiver that might fit your needs is the Sherwood RX-4105. At 100 WPC you will be banging it nice and loud. It will require an external phono preamp, but at $120 you can afford one.

    http://www.amazon.com/Sherwood-RX-4105-Stereo-Receiver-Black/dp/B0002EPWC0/ref=sr_1_24?s=aht&ie=UTF8&qid=1313428014&sr=1-24

    If you go with the Sherwood, get this phono-pre, the Artcessories ART DJPRE II . You will not do better for under $100.

    http://www.amazon.com/ART-II-Preamplifier-Outputs-Switchable/dp/B000AJR482/ref=sr_1_2?s=electronics&ie=UTF8&qid=1376331900&sr=1-2&keywords=artcessories
u/Umlautica · 2 pointsr/audiophile

$100 can get you a 2ch receiver or integrated amp with a phono input pretty easily on the used market. It's a bit harder to find something new in that price range. Alternatively, you can get a cheap Behringer PP400 phono preamp and a set of powered speakers. If you're looking at powered speakers that don't have a volume control then you might use something like the ART DJ Pre instead since it has a gain control that you could use as master volume. Once you have that, you can use a pair of Emotiva or JBL studio monitors.

If you must buy new then a Yamaha R-S300 is in the ballpark.

u/DeweyCheatem-n-Howe · 2 pointsr/vinyl

Not a problem. My biggest recommendation is always "try before you buy" - any CL seller should be willing to demo the unit if asked, and that should protect you from needing to worry about fixing stuff.

A few recommendations:

Audio-Technica LP120 for $150 - a new table, usually $300, two steps up from the C100 or the 120's little brother the LP60. Has built-in phono preamp. Fully manual (no push button to play or autoreturn features).

Another LP120 for the same price, price "negotiable"

Yet another LP120 for $140 (yes it's weird that so many are available, but it's a solid table)

Pioneer PL-50 for $75. Needs a belt, but belts are crazy easy to put in. $15 for a belt on Amazon. Would need a preamp - I'd drop $50 on the ART DJPREII. This is the table I'd get, frankly; I love Pioneer tables, I love the look of these (veneer) wood plinths, and just... I love this table for a very reasonable price. You MIGHT need to replace the stylus - not the cartridge, just the stylus - but you were considering upgrading the cart with the Crosley anyways.

u/sneddo_trainer · 2 pointsr/vinyl

It looks like your speakers are powered? In that case you just need a phono preamp. You'd connect the output from your turntable to the input on the phono preamp, then the output from that to your speakers.

If you put 'phono preamp' in amazon it'll give you an idea of what's available. If you want a recommendation a lot of people suggest this one.

Of course if your speakers are not powered then you will also need a power amp. That Lepai will do the job but there are better options out there for more money.

u/WorldChempion · 2 pointsr/vinyl

I'm looking to upgrade my setup and am looking into buying these items, how are these and will this setup work?

Turntable:Audio Technica LP-120

Amp:ART DJ II Phono

Speakers:Audioengine A2+

u/jaba1337 · 2 pointsr/BudgetAudiophile

$50 for the ART DJPREII will be the best budget preamp you will find. Unless the rest of your system is pretty high end, I wouldn't put a ton of money into a phono preamp.

u/tominabox1 · 2 pointsr/vinyl

Had one for 30 seconds, hated it. Buy this instead if you can scrape up the extra cash.

u/nancyfromscrubs · 2 pointsr/vinyl

Just bought this and I was wondering if I could use that preamp with this plugged into some headphones to listen to my records. Is this a safe idea or should I just wait until I can save up for some speakers and a quality amplifier?

u/staxnet · 2 pointsr/vinyl

I've used and like this one, but this one is popular, as well. I have no experience with the later.

u/dudelydudeson · 2 pointsr/audiophile

Never used one of these but seems like it would fit the bill:

https://www.amazon.com/Pro-Ject-Phono-Box-Preamplifier-Black/dp/B000YEK1AQ

u/Bearded-Reefer · 2 pointsr/vinyl

Hey-o,

I've got a setup question:
Will a pro-ject debut Carbon connect to Klipsch R-15PM speakers a Klipsch Reference subwoofer with the pro-ject phono preamp

Any advice is appreciated for speakers to go with this turntable! Thanks!

u/ga129 · 2 pointsr/vinyl

Looking at possible options for new Phono Preamp under $350. Have my eyes on the Vincent Pho-8and the Mobile Fidelity StuidoPhono. Alternatively, was also looking at this cambridge unit. Thoughts, comments, or suggestions? I'm currently using a Pro-Ject Phono Box MM. Thanks....

u/Graceful_cumartist · 2 pointsr/vinyl

Well second hand you can get something really cool, otherwise most likely something like this Pro-Ject, this pre-amp and if you can squeeze in extra 25 I definitely recommend these speakers. These speakers are usually way more and they are really good, giving you the ability to control audio trough them and also using headphones if you want to.

Now I started with a Pro-Ject and am bit biased on them. But I also think they have some real benefits over Regas basic models and the U turn. The Pro-Ject comes with Ortofons OM-10 that is a great cartridge in its own right and it can easily be upgraded with replacing the stylus with a higher quality one. They also have some adjustments available over the rega.

u/filthyneckbeard · 2 pointsr/vinyl

Looking to get my first setup, would greatly appreciate feedback in case there's something I've missed, or somewhere I've been dumb!

I live in an area in the UK where shipping sucks wang, so looking to get everything from amazon.co.uk where possible.

Turntable: Pro-Ject Debut Carbon https://www.amazon.co.uk/gp/product/B007XTE6YW/

Speakers: Wharfedale Diamond 9.1 https://www.amazon.co.uk/gp/product/B002WJAQY2/

Amp: Pro-Ject Phono Box MM Amplifier https://www.amazon.co.uk/gp/product/B000YEK1AQ/

Does this look reasonable?

u/why-not-zoidberg · 2 pointsr/audiophile

If you want to go as cheap as possible, the best solution would be one of the ubiquitous cheap phono pre-amps, and an inexpensive headphone amp (Fiio E6 or E11). Upgrade either of these parts as you see fit.

The only all-inone preamp and headphone amp that comes to mind is this Bellari.

Another option is to buy a vintage receiver or integrated amp that has a phono input and use the headphone output from that.

u/hellomika · 2 pointsr/vinyl

This one is not too expensive and has the advantage of integrating a headphone amp. And you can upgrade its sound by switching the tube later (or now).

u/timfrommass · 2 pointsr/audiophile

If you’re on a budget this one comes very highly recommended

ART DJ Pre II Turntable Phono Preamplifier with RIAA EQ and a RCA Male to 2 RCA Male Audio Cable 3' https://www.amazon.com/dp/B0777NFCC5/ref=cm_sw_r_cp_api_joJ-BbPV0X0MH

u/Theshag0 · 2 pointsr/audiophile

Depending on the turntable, you probably need a preamp: http://www.amazon.com/Pyle-PP999-Phono-Turntable-Pre-Amp/dp/B00025742A/ref=sr_1_2?ie=UTF8&qid=1462215132&sr=8-2&keywords=phono+preamp

Then just plug an RCA cable into one of your unused inputs; probably the "tape" input unless you are a total madman and are still using cassettes.

u/DamNub · 2 pointsr/diysound


hmm it doenst look like my turntable has a pre-amp build in so it looks like i also need to buy that. Are there any well known pre-amp kits? I did some quick googling but I mainly found mic pre amps wich i asume is something completely different. maybe ill just order the pyle p999 and maybe ill later upgrade to a actual diy pre amp

thanks for your explanation about preamps

u/ldeas_man · 2 pointsr/audio

so you'll need 2 things: phono pre-amp and a transmitter

a quick Amazon search shows no phono pre-amps with an ADC built in, and the only ones I can find are $150+. something like this Pyle phono stage, paired with this Tao Bluetooth transmitter

the 1Mii transmitter may be a bit better quality wise. it also doesn't require batteries, if that matters

I'm sure there's a better (perhaps all in one) solution than what I've provided, but it should work fine and be easily obtainable via Amazon

u/zuzuk2 · 2 pointsr/vinyl

I have been reading a lot of posts on here and I am a little confused on what I need for a full setup. I am looking at the uturn Orbit (no preamp), the Micca PB42X speakers, and this preamp. Is this the right stuff and would I need anything else?

Thanks in advance.

u/oblivion923 · 2 pointsr/audioengineering

Yes they are all plugged into the same power strip.

I've tried moving around the preamp while it's connected to see if it changes anything but nope :/

https://www.amazon.com/Pyle-PP999-Phono-Turntable-Pre-Amp/dp/B00025742A this is the preamp I have. Would connecting a ground wire from the turntable into the preamp help?

I'll look into isolation transformers.

Thanks!

u/beige4ever · 2 pointsr/vinyl

{I don't know how to make that symbol for British pounds.}

I suppose you could do worse than a Pro-Ject entry level 'table for 150.

http://www.whathifi.com/review/pro-ject-essential

for the phono preamp, any of the external boxes like Pyle, TCC, etc. between 20-40

http://www.amazon.co.uk/Pyle-Pro-PP999-Phono-Pre-Amplifier/dp/B00025742A/ref=cm_cr_pr_product_top

that puts you near 200 and leaves 100. I suppose you could just use your computer speakers til you can get something more robust.

Can't really get something worthy of the Pro-Ject for 100 in the powered speaker market, I think, but computer speakers will get you by and most people have those already. Need at least another 250-300 for a decent receiver and bookshelf speakers... or a 150+ for a decent powered monitor [as I imagine the M-Audios would be] set , so the initial outlay of 200 is a foundation for whatever downstream components you decide on

u/rtikthirteen · 2 pointsr/nin

Well, that wasn't exactly successful. I got a Pyle PP999 and while it's definitely louder, it's also so distorted as to be unlistenable. The signal is far too hot, I believe. At this point, I want to throw everything at the wall and call it an art installation.

u/Shike · 2 pointsr/audiophile

Okay:

This Monoprice amp/dac combo has a switch between the two (and bonus gain switch - may come in handy with different cans down the road) - the downside is it's not currently in stock but does have an ETA. The TC preamps seem to have some quality issues recently so I'd suggest going with an entry preamp like this.

Hook turntable to preamp, preamp to amp. Hook PC directly to amp. Flip between USB and AUX as needed - problem solved.

u/a1recycler · 2 pointsr/pinkfloyd

I just used a sony system I hadn't used in a while. Plugged my dad's old turntable into the TV/Video port using a Pyle Pro Pre-amp for $12

http://www.amazon.com/gp/product/B00025742A/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

u/justinc79 · 2 pointsr/vinyl

A lot of people on here like this one: https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

There's plenty of cheaper models out there that will work fine as well, plus more expensive ones. The cheaper ones do have a lot of varying problems with quality control, so you might end up with a dud and have to exchange it.

u/xCaptainCookx · 2 pointsr/vinyl

Check to see if your U-turn has one or not. If it doesn't, I got this one: http://www.amazon.com/ART-DJPRE-II-Preamplifier-Switchable/dp/B000AJR482


It was a lot cheaper when I bought though, like $25 lol

u/ClippedAtTheHip · 2 pointsr/vinyl

I've had a 120 for 4 years now. It's a great turntable. I don't think it deserves the hate it gets.

Here's what you should do if you get one:

Learn how to set it up properly. There's plenty of info in the manual and online about this.

Don't use the built in pre-amp - you can get better preamps at Amazon for relatively cheap. I use one of these: https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_cp_api_P0.Kxb4H025DY

If you're mechanically inclined, remove / bypass the internal pre-amp. If not, no big deal.

Upgrade the cartridge.


One thing to consider is that it's a direct drive turntable. That means not having to change the belt placement when you want to listen to a 45 rpm record or buying an additional speed box like some belt drive tables need. But, if it breaks down, repair is going to be trickier.

As I said, though, I've had mine for 4 years now and it's been great.

u/DarkAudit · 2 pointsr/vinyl

The ART DJPRE II gets good marks and is only $49 from Amazon. http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482

u/chadw1701c · 2 pointsr/vinyl

This is the preamp I use. Others here may (probably will) have a better suggestion.

u/Travnar · 2 pointsr/vinyl

Is this the ART DJPRE II preamp people often refer to?

u/Jelcen · 2 pointsr/headphones

Looking at getting this nobsound pre-amp volume control.

https://www.amazon.com/Nobsound-Balanced-Passive-Pre-Amplifier-Controller/dp/B01M4I9EOK/ref=sr_1_1?ie=UTF8&qid=1505992642&sr=8-1&keywords=preamp+volume

I don't want to support schiit so I'm not getting the sys, and this seems to be better built, looks nicer and you can switch between 2 sets of xlr and rca interchangeably. It's also a few bucks cheaper after you factor shipping.

You think it's a good buy or is there anything else ya can recommend?

u/DaDouglar · 2 pointsr/audiophile

I'm new to audiophile gear in general and I need some help with my setup.

If anyone could help me find a budget way of doing this that would be great.

I currently have a Yamaha v683 AVR, I went for an AVR because this is my media centre. It's connected to the tv, the consoles, the pc, the cable box, and the music source, as I always intended this to be my media hub. So currently I have the receiver connected to the Kef ls50s via banana plug, but what I want to do right now is add 2 Monoblock amplifiers for my ls50.

I know mono blocks for ls50 is a bit extreme but there's a second reason too, I eventually want to get the kef blade if possible. I listen strictly to stereo, better for music. So currently I'm looking at thinking of getting 2 Vidar's in monoblock for my ls50, but the problem is my receiver doesn't have xlr outs, and apparently all monoblock setups need an xlr input.

I found this, as I was thinking of using this as a in-between my receiver and the Vidars, as it gives me two xlr outs.

https://www.amazon.ca/Nobsound-Fully-Balanced-Single-Ended-Pre-Amplifier-Controller/dp/B01MXC9HHW/ref=sr_1_6?ie=UTF8&qid=1539216924&sr=8-6&keywords=balanced+preamp

or this, but its a lot more expensive when I factor in the prices of the 2 Vidars

https://www.amazon.ca/Cambridge-Audio-DacMagic-Digital-Analogue/dp/B0074EGIGU/ref=sr_1_1?ie=UTF8&qid=1539247998&sr=8-1&keywords=Cambridge+Audio+DacMagic+Plus

I don't know how that will do, but if anyone could suggest a better quality/price ratio gear for me that would be great.

My other question is, should I get the Vidars or something else, as I've said I want to get the kef blade eventually. I would prefer to buy one amp setup and just live with it until the end game if possible. I know the Vidar is more than enough for the ls50, and probably most speakers under 10k. But I hear the original kef blade takes 600w at 2ohm, during its lowest frequency, so should I get something like emotive xpa mono blocks at 1000w RMS at 4ohm.

Or should I just buy the Vidars, or whatever you guys suggest as a better power for money, now and just wait until when I actually purchase the kef to do something about it.

I know you're going to ask, the reason I really want mono blocks is because of symmetry, and I like the fact that each amp is isolated from each other, and there isn't crosstalk through one power supply.

I completely know I'm a noob when it comes to audiophile, but I just fell in love with the ls50s, they were the most amazing sounding speakers I've heard, they were so transparent and brings out all the flaws in bad music. I kind of regret the AV receiver purchase, but I also needed it as my hub, anyone can help me that'd be great.

u/TehFuriousOne · 2 pointsr/vinyl

It all just depends on what you want to do with it. Think about it a bit in the long run. If you want to keep with powered speakers for a while, don't sink money on a power amp. If you want to hook the TV or what not in, the Onkyo may be a good choice.

​

If you're going to stay with what you have for a while then you don't need much. The system is good but not audiophile or anything (neither is mine...lol) so you could go with something like THIS. Which will leave you $150 bucks more for records. (This is just an example, I haven't used this unit but it's well reviewed and would suit your needs as I understand them. YMMV)

u/omartian · 2 pointsr/xboxone

I do know this works. Tried it last night. I'm able to get lossless audio to receiver and hdr/4k to tv but don't want to have to buy 3 of them for my shield TV and PS4.

ViewHD UHD 18G HDMI Audio Extractor / Splitter Support HDMI v2.0 | HDCP v2.2 | 4K@60Hz | HDR | ARC | 3.5MM Analog Audio Output | Toslink Optical Audio Output | HDMI Audio Output | Model: VHD-UHAE2 https://www.amazon.com/dp/B0755TB82Q/ref=cm_sw_r_cp_apa_3TYLAbRPS4E5K

u/legion1capone · 1 pointr/HeadphoneAdvice

I don't know of any other fully balanced dac on the market for such a low price. It's not expensive for what it is. It's usign the new AK4493 chipset, 3 volume selection, unique sweet looking cases. If you want to use XLR from a dac your not going to find many options.

A DAC and amp combo I can fully stand behind is the Aune X1S 10th anniversary edition. Best dac I've yet heard for the money. I payed $250 for mine! They are selling it on massdrop right now for $179 which is a very very good deal! I have the original version with the weaker amp section. This amp section is much stronger.

Then purchase the Nobsound fully balanced volume control to go to your powered speakers. You could use this with the Geshelli labs dac or the aune to control the volume. I recommend amazon basic cables for quality cables at a cheap price.

u/byttle · 1 pointr/ZReviews

Currently I use this as my chain:

PC (optical out) > Gumby > Nobsound passive preamp > Minidsp DDRC-24 > Emotiva BasX A-150 > JBL Studio 530.

I'm not really a big believer in preamps as you can tell. In rank of what made the biggest difference for my speakers I'd say:

  1. Minidsp (holy shit dirac is amazing)
  2. A-150
  3. Gumby
  4. Nobsound

    I don't think you'll gain much benefit from adding a headphone amp with a "good" pre, especially since you'll be getting Stax. I feel like your money would be much better spent putting it towards things that will actually affect the sound, like a better dac for Stax/speakers, DSP, or maybe a subwoofer.
u/MoogleMan3 · 1 pointr/BudgetAudiophile
u/llendo · 1 pointr/vinyl

Makes sense, so no balanced phono preamp.

Budget: Would like to keep the expenses low because this whole solution wont produce the best sound anyways, so buying high end components makes little sense.

Found this thing, that would work right? I'd prefer a passive solution over a mixer. Its a cheap china thing though.

u/zeagan · 1 pointr/BudgetAudiophile

Oh sorry, it's hard to not go all jargon-crazy sometimes.

So studio monitors are designed for mixing audio, as such they're designed to be very very accurate. The flat response means if you plot a line representing all the audible frequencies from bass to the highest treble the line would be flat, so no boosted bass or lowered midrange or any of those things people usually fiddle with knobs to do. Just dead accurate, which lots of people think they want until they hear it, mids and highs can get a little tiring to listen to and is sometimes considered not a "warm" sound.

B&W is Bowers and Wilkins, a very good brand and I just meant find some from the 1980's because they crop up for sale used from time to time and sound great (check craigslist for B&W, Mission, Elac, Mirage, PSB and Wharfedale). Other options that aren't used would be Cambridge Audio SX50's, Elac B6.2's, and Wharfedale Diamond 210's. (Tons of reviews of all of those out there) As for an amp, the SMSL SA50 is plenty for most people for normal listening levels.

As for a DAC, you wouldn't necessarily need one for active monitors, but you would definitely need some interesting cables like these shitty ones. One of the advantages of pro-audio gear is they use balanced audio signals which makes long runs of cable safe from electromagnetic interference/noise/hum, most people don't have runs long enough for it to matter in their house but they look cool and "pro". Also to actually have a balanced signal going through those XLR cables you need a balanced output, which is where a DAC with balanced outputs or volume controller would come in. Here's a cheap ok controller.

Don't get me wrong, I'm not trying to talk you out of studio monitors, speakers are super super super subjective and if I encountered a set of studio monitors that really blew my skirt up I'd probably buy all the balanced cables and some huge volume knob to be able to listen to them and be happy as a clam. Just hasn't happened yet.

u/demet123 · 1 pointr/BudgetAudiophile

Ok great, I think I will hold off on the DAC until and if I might feel I need it. I found this that seems like it would do what I want:

Nobsound Mini Fully-Balanced/Single-Ended Passive Preamp; Hi-Fi Pre-Amplifier; XLR/RCA Volume Controller for Active Monitor Speakers

https://www.amazon.com/Nobsound-Fully-Balanced-Single-Ended-Pre-Amplifier-Controller/dp/B01MXC9HHW/ref=sr_1_4?s=electronics&ie=UTF8&qid=1541612767&sr=1-4&keywords=tube+passive+preamp

and connect from there to speakers with (two?) XLR cables:

https://www.amazon.com/dp/B00XK9L1WY/?coliid=I1WI5F3XZHQJJN&colid=2S3E3S2YGUWG1&psc=0&ref_=lv_ov_lig_dp_it

seem ok? thanks!

u/IAMYOURBIGBROTHER · 1 pointr/vinyl

I'm getting really low volume from current setup:

Turn Table: Pro-Ject - Debut Carbon DC

Pre-amp: Nobsound Mini Fully-Balanced/Single-Ended Passive Preamp

Active speakers: Micca PB42X Powered Bookshelf Speakers


Dialing up both the speaker and pre-amp volume doesn't seem to help.

Do I need a different pre-amp or should I add an amplifier and replace the active speakers for passive? Or is there a setup where I can still use the powered speakers?

u/Tiebierius · 1 pointr/cordcutters

I assume the optical is for connecting your AV receiver, consider a device like this , you can then choose nearly any streamer that supports your other criteria.

u/atomxv · 1 pointr/ShieldAndroidTV

what you need is an HDMI audio extractor. I have this one and it works fine: https://www.amazon.com/ViewHD-Extractor-Splitter-Support-Toslink/dp/B0755TB82Q/ref=sr_1_2?keywords=ViewHD+UHD&qid=1572960701&sr=8-2

HDMI out from the shield to the ViewHD box, from there HDMI out to my TV for 4K/HDR video and HDMI out to my H/K AVR for audio (DTS/DTS HD-MA/DD/DD+/TrueHD, whatever your AVR supports).

My only issue is that once a week or so, I have to unplug the ViewHD and plug it back in for my TV to recognize it.

u/nielsonsm · 1 pointr/Roku

What kind of switch are you using? I have solved the problem with a ViewHD 18G HDMI audio extractor, linked here: https://www.amazon.com/ViewHD-Extractor-Splitter-Support-Toslink/dp/B0755TB82Q/ref=sr_1_fkmrnull_5?crid=3CH1GGYMMNIWS&keywords=viewhd+18g+hdmi+extractor&qid=1555515620&s=gateway&sprefix=viewhd+18g%2Caps%2C129&sr=8-5-fkmrnull

The issue I have now is I can only use it this way if I turn off CEC control on the soundbar, otherwise it automatically switches input to D.IN, which now causes me to lose volume control with the roku remote.

Also, I was planning on using the ViewHD HDMI audio extractor with my Xbox One X since the soundbar can't output 4K HDR @ 60Hz @ 4:4:4.

I'm wondering if It is just a compatibility issue with Roku and some AVR's like the previous guy posted about.

u/ace518 · 1 pointr/sonos

I had the same problem. I never solved it. I useda 4k 5.1 audio extractor I found on amazon, and sent the audio to the sonos separately.


just make sure the one you get does 4k @ 60hz. I was using mine as a PC monitor at the time, so that was extremely important. I don't think the TV can actually pass thru more than 2 channels. I could be wrong.

​

heres a link to the adapter I got.

https://www.amazon.com/gp/product/B0755TB82Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

u/KsaThug · 1 pointr/hometheater

i have rx-v677 wich is a hdmi 1.4

and a new snony 4k tv f900x

my rx-v677 dont support HDR

i did not whant to buy a new av revciver so i orderd some thing calld (HDMI Audio Extractor/Splitter Support)

https://www.amazon.com/gp/product/B0755TB82Q/

so i can play hdr on the tv and dts-hd on av reciver with no isues

u/YourVeryOwnCat · 1 pointr/vinyl

Yikes. But if I were to get an external preamp like DJ Art 2 I would be able to use any speakers?

u/CloudKoopa · 1 pointr/vinyl

Based off all of the info you linked above here's what I'm looking at: (can you confirm this all works together?)

Turntable: Fluance RT82 - $299.99
Speaker: DCM TP160 by MTX Audio - $80
Amplifier: SMSL SA100 - $73.99
Phono:
ART DJ PRE II - $66.99

PA10 High Fidelity Phono Preamp - $80
- Do I still need this w/ the above SMSL?

Total: $520

u/cosmic1125 · 1 pointr/vinyl

Personally I can't recommend a preamp because I have a receiver which takes care of the preamp and amp. Found it in my basement, but to answer your question it all depends on your budget. At the lower end there more than likely won't be any huge or really noticeable differences.

https://www.amazon.com/ART-DJPRE-II-Preamplifier-Switchable/dp/B000AJR482/ref=sr_1_12?ie=UTF8&qid=1466012331&sr=8-12&keywords=turntable+preamp

A lot of people like this one and if you can get it then it'll be good enough.

u/murpes · 1 pointr/vinyl

Excellent choice on the BS22s! They're fantastic speakers. I bought a pair for what I expected to be a temporary, transitional set, but I enjoy them so much I now have no intention of replacing them.

That Lepei amp will get the job done. It's not really an "audiophile" amp, meaning if you're going to sit there with a frown on your face and listen to test tones and not music, you'll notice some of its limitations. But in that price range, there's little else that will drive your speakers with reasonable fidelity. It's kind of designed for casual listening, not critical listening. A lot of people that do critical listening assume everyone does, and neither has anything to do with enjoying the music. Your speakers have a more meaningful impact on the quality of sound that the amplifier does. The Pioneer speakers are a tier or two above the Lepai amp in terms of quality, but I'd rather have that than the inverse.

For around $100, there's this Parts Express amp. It's a pretty generic amp; you can find the same guts in a different case from other companies for about the same price. I have no direct experience with this amp, but I suspect it would be quite an upgrade from the Lepei. Someone else made an excellent recommendation for a Yamaha integrated amp.

Another variable being the outputs on your turntable. Most turntables put out a signal that's far too weak for even an amplifier to handle, so they need to be "pre-amped" along with some other processing. Some turntables have this built in, some don't. Likewise, some amps have this circuitry, some don't - most modern amps don't, including the Lepei and Part Express amps mentioned here. In this case you'll need a pre-amp that sits in-between your turntable and amplifier. This one is a popular budget choice, and one I can personally recommend. Some forum-searching will reveal others.

The mentioned powered speakers are another option, especially when getting more bang for your buck. Down the road it can be limiting - you can't upgrade your speakers without buying an amp, too. There's also the whole pre-amp question with these as well. Still, they're a great way to get busy listening to your records.

There's a lot to consider and it can seem overwhelming, but don't let that interfere with the fun of spinning the discs. A lot of us around here enjoy music and dicking around with equipment, and love offering our opinions on both.

u/Merci_Pour_Le_Venin · 1 pointr/vinyl

These two would be fine on a budget of $220:

[Yamaha R-S201BL 2-Channel Stereo Receiver] (https://www.amazon.com/dp/B00F0H88SY/ref=cm_sw_r_other_apa_It43xb6A4626W).

[ART Pro Audio DJPRE II Phono Turntable Preamplifier] (https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_other_apa_av43xbHE3X876)

That's only $160. For speakers and that budget, I'd go for the Micca MB42s (Mine were cheaper than this).

All this and you're barely above your budget at $229.43.

I could suggest the extreme budget stuff that I bought (Pyle, Lepai), but there's no point when you have the credit. You'll also need speaker wire and a pair of RCAs. You'll probably end up around $240 or $245.

Ninja edit: Or, you could go vintage, but then you wouldn't be able to use your Amazon credit.

u/Olgaar · 1 pointr/hometheater

Just a couple things to keep in mind... The new receiver will likely include a tuner (-1 analog input), nobody in their right mind listens to cassettes (-1 more analog input)--seriously have him show you what cassettes he listens to and then just find them on vinyl or CD. Add in a in-line phono pre-amp here for $50 or here for even less, and your real requirement becomes 2 normal analog inputs. Also, keep in mind your BluRay player can probably play CDs. Really the only thing you'll probably keep from the old stack is the turntable... and if it was a mid-80s Kenwood system, then you could show him how much you love him by buying him something like an Orbit from U-Turn.

Lastly, about the subwoofer, yes you can easily send all the low frequency content to your front speakers and that's a great way to save some money to get things rolling. Just don't pretend that's the same as having a modern subwoofer. 10" vintage woofers do not produce the same quantity or quality of bass as a subwoofer designed in the past 10 years.

u/FatFingerHelperBot · 1 pointr/vinyl

It seems that your comment contains 1 or more links that are hard to tap for mobile users.
I will extend those so they're easier for our sausage fingers to click!


Here is link number 1 - Previous text "$49"



----
^Please ^PM ^/u/eganwall ^with ^issues ^or ^feedback! ^| ^Delete

u/AGentleScholarMan · 1 pointr/audiophile

I am looking to choose the best budget pre-amp of these 3 (or similar suggestion) for my vinyl setup:

  1. Music hall PA 1.2 phono pre-amp
  2. ART DJPREII Phono Preamplifier
  3. Fosi Audio P1 Tube Pre-amp

    I currently have the Music Hall PA 1.2 (came with the TT) but I'm open to selling it and buying a cheaper, better pre-amp. Not particularly impressed with the power or sound, and the blue light is blinding. Glad it came with the TT and wasn't purchased separately on my own dime.

    SETUP:


    TT: Debut Carbon Esprit SB (DC) w/ Ortofon Red
    Receiver: Yamaha RX-V379 (no built in pre-amp)
    Towers: Klipsch RP-280F x2
    Center: Klipsch R-52C
    Surrounds: Klipsch R-14S x2
    Sub: Klipsch R-150 SPL 15"

u/Falconstein · 1 pointr/BudgetAudiophile

The Yamaha receivers listed above do not have phono input. You would need something like this and it is likely much better than what is built into most budget receivers anyway.

https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

The Onkyo does have phono and adds subwoofer out.

u/Sonny34 · 1 pointr/vinyl

Vinylmeplease has these kits btw, but they comes with the Behringer which I hear is not as good as the Art DJpre II. Anyways hope I was somewhat helpful

u/non_mobile_link_bot · 1 pointr/vinyl

Here is the non-mobile link from the comment above
***
This bot is supported by the referral link above. If you wish to not use a referral link, you may use this link instead.

u/IronManHole · 1 pointr/vinyl

ART DJPRE II Phono Preamplifier RCA Type Input and Output Switchable Low Cut Filter https://www.amazon.ca/dp/B000AJR482/ref=cm_sw_r_cp_apa_V4JZBb1CWZY2F

u/slammyman · 1 pointr/vinyl

I get some static in between songs when listening to records on my Sonos. I'm guessing it is my preamp. I have a record player -> preamp -> Sonos Connect Amp.

Here is the crappy amp I'm using

Should I upgrade or should I expect some static?

u/dwrooll · 1 pointr/vinyl

FYI I got the orbit + this preamp ART DJPREII Phono Preamplifier https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_cp_api_i_q9nZCbXH6A7TS and these powered speakers Mackie Studio Monitor, Black w/green trim, 3-inch (CR3) https://www.amazon.com/dp/B00KVEIY4E/ref=cm_sw_r_cp_api_i_29nZCbZ0KGP5C

About 4 years ago and they still hold up perfectly and I haven’t felt the need to spend more money to upgrade it yet

u/leehofook · 1 pointr/turntables

ok, so you can't be more specific about the models, etc.? if it's easier.. grab yourself a preamp and you can use any of the 3 (best shape... like the look the best, etc. etc.).

i've used and recommend this model:

https://www.amazon.com/ART-DJPREII-Audio-Turntable-Preamplifier/dp/B000AJR482/ref=sr_1_5?ie=UTF8&qid=1539625078&sr=8-5&keywords=preamp&dpID=41lYvmMX6eL&preST=_SX300_QL70_&dpSrc=srch

u/radddchaddd · 1 pointr/vinyl

Depends on your budget and all -- if you're looking to test it and just generally try it out, check out the DJ ART Pre II. It's a decent cheap phono preamp.

u/jstbuch · 1 pointr/BudgetAudiophile
u/slavikcc · 1 pointr/vinyl

You can buy an SMSL mini stereo amplifier and then an DJ ARTPRE II. That should cost less than $150 with that combo.

u/discoshrews · 1 pointr/vinyl

So I'm looking at the Technic SL-5, and I was wondering if these other components would work well with it to get what I need.

Preamp:https://smile.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482/ref=sr_1_5?ie=UTF8&qid=1499029539&sr=8-5&keywords=phono+preamp

Headphone Amp:https://smile.amazon.com/dp/B00LP3AMC2?m=A1SB43AYTB3IR4&ref_=v_sp_detail_page

Assuming I get the nessesary conversion cables (RCA to 3.5) would this setup work?

Thanks again

u/ngraan · 1 pointr/vinyl

Speakers

Amplifier

Phono preamp

You'll need two sets of male-to-male left/right RCA audio cable, one from the turntable to the phono preamp and the other from the phono preamp to the amplifier. You'll also need speaker wire from the speakers to the amp.

u/sports_ftw12 · 1 pointr/vinyl

I would suggest upgrading your pre amp to an art djpre ii. These are the best phono pre amps for less then $50. Not much more money, but will sound much better then any pyle pre amp. https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

u/jawboxer · 1 pointr/vinyl

I've had a U-Turn Orbit Plus for a couple of months, and am really happy with it. It sounds great and has worked perfectly. I thought about the AT-LP120 also, but decided on the Orbit because I like it's cleaner simple look.

I don't know anything about the Gemini and Stanton turntables you mentioned - but I think most people would be very happy with the U-Turn.

I'm not sure how much of a difference in sound there is between the AT95 cartridge that comes with the Orbit Basic and the Grado Black that comes with the Orbit Plus... but if it's anywhere close, I think you'd be pleased.

One thing that some people list as a downside is that it doesn't have a cue lever - but that hasn't bothered me. U-Turn is releasing a cue lever as a $40 add-on soon.

I'm using mine with the ART USB Phone Plus preamp, because I wanted to transfer some music to my computer. My one complaint about this preamp is there is no power switch... it's always on unless you unplug it. Also, this one does NOT come with a power supply, you have to buy that separately (or just keep it plugged into your computer's USB port for power).

The non-USB version, the ART DJPRE II DOES come with a power supply (but still no power switch).

u/IncognitoKoala · 1 pointr/BudgetAudiophile

For the needle/cart, does it have the original cartridge on it? If not, you will have to get a needle specific for your cartridge. Just read the model number on the cartridge and do a google search. Some needles sellers will even have you send a picture and recommend you a needle. I have had very good luck with the 'generic' $10 needles from ebay.

For the pre-amp, I just purchased this and am absolutly loving it. Looks like it's right in your price range too. My only two complaints are that it doesn't have an on/off switch(it's always on when plugged in), and the LED on the front is BLINDINGLY bright. Other than that it sounds fantastic, has good build quality, and is the cheapest pre-amp with adjustable gain to my knowledge.

Your link for the power amp isn't showing up, but anything under $50 new is going to be very poor. If $50 is your max budget for a power amp, I would start hitting the thrift stores.

And welcome!

Edit: just saw your other thread on r/vinyl and your power amp link shows up there. That is indeed a decent power amp, an exception to the rule. It is very basic, but if you're only using it for your vinyl setup it should be adequate(until you get the upgrade bug that is!)

u/vinyladventures · 1 pointr/vinyl

I got 2 questions.

I've asked questions regarding this cartridge on here before but I still have questions about it. It is an Ortofon OM with a 20 stylus (sorry if naming is off, not too good with this stuff). I want to put it on my Sony PS-4300.

http://imgur.com/9z1P7BP

I checked it with a multimeter and a current still passes through both channels. I then took off the old cartridge (an Audio Technica AT-3600) and wired it up. I ran my finger over the bad stylus and it gave off muffled sounds so I think it's safe to say that the cartridge still works (got it for free of a broken turntable). Would this stylus be a good one to start out with? I know styluses for this thing are expensive but I just want something decent over the AT-3600.

https://www.turntableneedles.com/Stylus-10-Type-Needle-for-Ortofon-OM-OM-Super-Series-Cartridges--our-Needle-541-DE-copy_p_3796.html

I think my pre amp is now junk at this point. I get a lot of hum out of my set up when I turn up the volume to listening level. When I leave it on the same level and change the audio source, the hum dies way down. I disconnected my turntable from the pre amp and the humming didn't change so I'm guessing it's the pre amp. It's a Pyle PP999 and to me it's turning into a pyle alright. Would this pre amp reduce the amount of hum or would it be the same or is this just normal?
https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482/ref=sr_1_5?ie=UTF8&qid=1492085505&sr=8-5&keywords=preamp

Edit: Spelling

u/DaleSauce · 1 pointr/vinyl

Honestly... I'm not sure. I haven't looked into Schiit's equipment enough to give you an informed opinion.

I do know, however, that many people recommend the Art DJPRE II. It's a $50 model that lots of people swear by. It might be worth looking into.

u/KALASH69 · 1 pointr/vinyl

Hey guys, my new TT shipped today (U-Turn Orbit) so I wanna order some new speakers and an phono preamp. I've been looking at the Audioengine A2+ and the M-Audio BX5 D2. have about 300 to spend on everything, and I wanted to know if there were any other speakers in my price range (100 to 250) and also what cords and cables I will need that aren't included with the TT or speakers.

Thanks!

u/n8great321 · 1 pointr/vinyl

Depends how much you want to spend. The cheapest recommended one around here seems to be the ART DJPRE. U-Turn makes one that seems to get decent reviews -
I think it's the one they offer with the upgrade? - and I've heard absolutely stellar reviews for the Schiit Mani

u/AlexTheTownPump · 1 pointr/vinyl

I would give the Fluance RT81 a look. It goes for $250 on Amazon. I have that and an LP120. I got the LP120 first but wanted a TT for another room and didn't have the time/patience to go the used route. Both are about the same in regards to specs. They both have the same cartridge. The Fluance is slightly smaller and lighter than the LP120.

I did get one of these (https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482) for the Fluance since the built-in preamp can be quiet depending on your setup. I had it going straight to some powered bookshelf speakers but it didn't quite reach that melt-your-face volume level. Once I added that preamp, it gave me plenty of headroom. The LP120 I have is going into a Denon receiver and is plenty loud. I imagine if it was just going through a pair of speakers like I have my Fluance setup with, the preamp issues would be the same. The internal preamps for both get some heat on this sub but they will get you by for awhile before you consider upgrading.

u/blankman2g · 1 pointr/audiophile

This would do the job.

u/CapnCrunch53 · 1 pointr/vinyl

You should just have to find out whether your receiver has a phono preamp built in, and if not purchase one. I'm using this one and am quite happy with it. Other than that, set your system to stereo and you should be good to go.

u/Elstir19 · 1 pointr/vinyl

Needing help with new set up for my wife’s Technics SL-BD20

17 years ago my wife and I got married and moved into a new house and my wife’s old Technics SL-BD20 turntable never got unpacked. We had small children at the time and not much room.

Now the kids are older and we still don’t have much room, but she’s always been a big fan of vinyl and as a Christmas present I’d like to get her up and running again!

I considered buying a new turntable (the LP120), but she’s always cherished her SL-BD20 turntable, so I am pretty set on keeping this turntable. If she really gets back into vinyl we can upgrade in a couple years.

And I want to keep the whole process as simple and straightforward as possible since I really have no clue what I am doing!

Today, I plugged in the turntable and everything appears to be functioning as it should.

She has a Sony LBT D108 stereo with direct phono hookup and some large-ish Sony SS-D110 speakers. I want to ditch these and figure out a smaller set up for the time being.

I’d like to keep the footprint as small as possible and as I am a woodworker I may even build her a cabinet and shelf unit to house everything.

So from my research it appears I need a pre amp and some powered speakers. And a new cartridge. And probably a new belt to have on hand.

I was wanting to spend about $50 on the pre amp. From doing a little research this seems to be a good one: ART Pro Audio DJPRE II https://www.amazon.com/dp/B000AJR482/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1MCQTNZBUHMQG&coliid=I3A0D31NILP92W

Another $25 on a cartridge: Audio-Technica AT92ECD

https://www.amazon.com/dp/B00006HO3L/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=1MCQTNZBUHMQG&coliid=I3N3SNC9BX4PUV&psc=1

And then perhaps some smallish powered bookshelf speakers for around $100 or perhaps a bit more if it makes sense. I could really use some suggestions on speakers.

I’m looking to maybe spend a couple hundred bucks total to get her back to listening to vinyl.

Sorry, I am a total noob and have zero experience with stereos etc. Will I need any other adaptors or speaker wire or anything else?

u/JessieAMorris · 1 pointr/audiophile

The good news is that reasonable phono preamps can be had for ~$20 or so. The Art DJ is $30 and is usually suggested for that price point. http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482

u/Saint_JohnKuhn · 1 pointr/vinyl

i have had one for nearly 2 years and love the fucking thing. i have the grado black cartridge. no cue lever, it would be nice as i'm a little nervous letting friends drop/raise the needle. i've been using it for so long that im confident that i can drop/raise safely.

I have my uturn running to an art djpre preamp running to powered AudioEngine A5 bookshelf speakers. Super simple setup that sounds great

u/TheMenk · 1 pointr/vinyl

I am going to upgrade my Fluance RT81 internal preamp to an external preamp. I have an $100 Amazon gift card. What would you recommend?

I am have been considering:

u/HASBARA_hillary · 1 pointr/vinyl

thanks bro, i grabbed this for now. most people seem to think it works good, albeit, on the lower end.

https://www.amazon.com/ART-DJPREII-Audio-Turntable-Preamplifier/dp/B000AJR482

i ordered a pretty nice speaker, so starting with a lower end phono amp sounds pretty safe.

u/comrade_eddy · 1 pointr/vinyl

The typical turntable setup requires a turntable with a pre-amp (built in or external), two speakers, and an amp. If your speakers are powered you don’t need an amp.

At your price point you’ll get the best bang for your buck if you get lucky and find it used at thrift stores. I live in a big city and that shit goes lightening fast. I looked for months and could never find anything so I bought new.

The cheapest new turntable that isn’t a PoS is the u-turn orbit. A cheap external pre-amp that will do the job will run you [$49](ART ART DJPREII Pro Audio DJPRE II Phono Turntable Preamplifier https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_cp_api_kK0SAb2F9RQDB). Some budget starter speakers $79 and a little cheap amp $29.

Now this goes over your budget so if you have to buy the turntable new you can reduce cost by looking for speakers and a stereo receiver (rather than an amp) at thrift stores. This stuff is usually easier to find than the turntable. Good luck!

Edit: whatever you do, don’t buy the audio technica lp60. It’s a PoS and you will want to replace it. Better to be patient and save.

u/Ian10 · 1 pointr/vinyl

This is what the seller wrote on the Craigslist page: "Turntable has the preamp bypassed for much better sound quality (sounded muddy with the cheap built in preamp. Just google "AT LP120 preamp bypass" and you'll find lots of positive feedback on the modification." I meant to ask him about it but completely forgot.

I have a budget of $70-120. I'm looking at amps like these:

SMSL SA50 50Wx2 TDA7492 Class D Amplifier + Power Adapter (Black) https://www.amazon.com/dp/B00F0H8TOC/ref=cm_sw_r_cp_api_eD8vybBZKFNRZ

Dayton Audio DTA-120 Class T Digital Mini Amplifier 60 WPC (Black) https://www.amazon.com/dp/B00HFG3FYA/ref=cm_sw_r_cp_api_gW8vybA47HVHH

Which I'd use with something like this:


ART Pro Audio DJPRE II Phono Turntable Preamplifier https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_cp_api_nX8vybW98ZMT1

BEHRINGER MICROPHONO PP400 https://www.amazon.com/dp/B000H2BC4E/ref=cm_sw_r_cp_api_LX8vyb5S2EEDN

u/LouSweetwater · 1 pointr/vinyl

That receiver will easily power the Miccas.

As for a preamp, the ART Pro Audio DJPRE II has many good reviews and gets recommended a lot around here. It's a great budget unit.

https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

u/Z3ROGRAV1TYx · 1 pointr/vinyl

Hey, so I picked up a Phillips AF-777 turntable. It is in very nice condition, but the cartridge (Stanton 680EE) sounds very flat and undynamic. It is worn down looking (Not really the needle by just the actual cartridge). I assume it hasn't ever been replaced or maybe once. So I was thinking about replacing it. I cannot go above $100. (So under $100) I want to achieve a Hi-Fi sound. I am currently using a Cambridge Audio Azur 640a v2 and a pair of Vienna Acoustic Bach. I saw the Shure M97xE, but am open to other suggestions on the under $100. (The M97xE is $100).

_

Now you may be thinking, what am I using for a phono preamp? Well I had a Kenwood KR-720 I was using, but seeing I picked up the Cambridge, that replaced the Kenwood. But the CA 620a v2 does not have a phono stage. I was looking for a good Hi-Fi quality phono preamp under $100. I looked around and saw this.. ART DJPRE II. It is $38.. and it seems to cheap to be good. But who knows, that's why I am here. I was also looking around on my CL and Ebay, but there hasn't been anything that I've seen.


I want a clean, non-distorted, accurate sound, with a bit of fun and great dynamics. Dynamics are important for me! If it matters, I plan to play music from Disco to Jazz to Vocals to Acoustic to Pop to etc. I enjoy lot's of kinds of music, so I like an all around sound.

__

I have been trying to get help with this for a while, and have not recieved any help with purchase advice! I appreciate ANY help avaiable here! Thank you!

u/mellovibes75 · 1 pointr/battlestations

So this may be a bit involved for /r/battlestations but for speakers you have two types: passive and active.

Passive speakers are literally just speakers in that they have to be hooked up to an amplifier to work. These are the most common type of speaker you see out there in home theater or stereo set ups, higher quality for less money but you have to have the amp separate.

Active speakers mean they have amplifiers built into the speaker (there will usually be a power/volume knob on the speakers themselves). 9/10 times these are what is hooked up a typical computer. They are smaller and don't require an external amp which is perfect for the average comp set up.

A typical analog set up would go: turntable -> integrated amp (contains pre-amp + power amp, must have phono input) -> passive speakers. It sounds like you have active speakers. If you do, then you would need to pick up a phono pre-amp (this is a popular one) The set up would go turntable -> pre-amp -> active speakers.

The Crosley has all of those things in one package, which while convenient, really impacts quality in the process. So if you could find a used turntable (bonus if the owner recently replaced the needle/stylus) and pick up the pre-amp, you should be golden.

u/arturo_mg · 1 pointr/vinyl
u/turnip321 · 1 pointr/vinyl

Your speakers are going to be expecting a line-level input, and the output from your turntable is going to be phono, so you'll still need a phono pre-amp. The ART Pro Audio DJPRE II seems to be a entry-level favorite around here, but as with all things be sure to do your research.

Edit: If you happen to have a mixer hooked up to your existing setup, check and see if it has a phono input.

u/vullnet123 · 1 pointr/vinyl

Would this be a good upgrade? Or are there better ones in the price range.

u/fresh_dan · 1 pointr/audiophile

A lot of places to start but Craigslist it for your speakers and receiver. My receiver I got free from a buddy, and the speakers I found on craigslist. Ask folks here whether ones you're eyeing are worth buying. The Project Debut turntable I bought new and I think it's a worthwhile purchase. The receiver either needs to have a "phono" setting, if not you will need to buy a pre-amp like this https://www.amazon.com/ART-Audio-DJPRE-Turntable-Preamplifier/dp/B000AJR482

u/throwcap · 1 pointr/vinyl

I recently bought a Technics SL221 turntable (no phono included) and now want to build a Beginner Setup. Already got powered boxes but need a phono.

Now I was wondering how I have to setup the phono with my speakers because I have 2 speakers and a subwoofer, where the connection looks like that. The Line Out from my PC (at the moment) goes into the Line In of the subwoofer and the subwoofer connects to both speakers via RCA connectors.

What would I have to do if I order an ART Pro Audio DJPRE II Phono Turntable Preamplifier for example?

u/vanj44 · 1 pointr/vinyl

I have a lp120 turntable and I'm using Edifier r1280t speakers. The sound is good but seems quiet at full volume. Should I buy an external pre amp like this one: https://www.amazon.com/dp/B000AJR482/ref=cm_sw_r_cp_apa_2hBXzbDJWMVNH ? Will this work with my set up and help improve my volume output?

u/FW190 · 1 pointr/vinyl

http://www.amazon.com/ART-II-Preamplifier-Outputs-Switchable/dp/B000AJR482

This one seems to be nice preamp for the money. I personally wouldn't spend more than that.

u/nomad113 · 1 pointr/turntables

If you don't have a phono input on your receiver and need a cheapish pre amp this was referred to me by this sub and it was a world of difference from $25 pre amp I was using.

Edit: Your receiver doesn't have a phono input. From my understanding, someone please help here, you need the amp or in this case a pre amp to boost the volume.

u/tuba_jewba · 1 pointr/vinyl

Putting together my first setup, and I have a question about buying vintage vs. new turntables.

​

TD;DR: I have a used Technics turntable that I have been offered a refund for, and I don't know if I should go for a brand new modern unit or find another used vintage one. My budget is also very low by this sub's standards. I don't want to spend more than $200.

​

Long version:

​

I bought a used vintage (1981 is vintage for me) Technics SL-B202 at an antique audio store on impulse this past weekend. It cost me $100, and I ordered a ART DJPre II Phono Preamp for $50 to hook it into my home theater receiver. The sound, as far as I can tell, is quite good, with 2 exceptions:

  1. There is a significant distortion at the higher frequencies, such that high/loud vocals, cymbal crashes, etc. sound fuzzy and harsh, as if they are coming through an old, tinny speaker. Google tells me this may be due to a dirty stylus, which I am inclined to believe, as this was the one he was using in the store to demo the records. I'll clean it, but its really a non-issue because...
  2. The real problem is a significant ticking that comes from the motor. I couldn't hear it in the store because the music was too loud. Google tells me this is a common problem with the SL-B202 due to a plastic ring that gets messed up in the motor (details here). Even though repair might be doable, I talked to the guy and he said he'd refund me for that.

    So the deal is, I can return the turntable and the preamp and put that $150 towards a totally new turntable with a built-in preamp (I'm thinking along the lines of a Music Hall USB-1, $200) or return the Technics for just $100 and try my luck with another vintage one. I know the guy has a couple other vintage Technics in his shop that were a little more pricey than the one I got. What are the advantages/disadvantages of going old vs. new? What do you recommend at this budget?
u/_stupidsexyflanders_ · 1 pointr/vinyl

[If you are handy and can source the part that is missing] (http://cincinnati.craigslist.org/msg/4807662754.html) this Technics SL 1200 MK2 could be a great platform to build your system around. It doesn't have a lid or hinges, but you can find them online and when possible purchase them when you can. If you could buy the table ($175) + the tone arm base replacement he says that costs $50 from eBay + and then the [Art DJ phono] (http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482/ref=sr_1_1?ie=UTF8&qid=1420510200&sr=8-1&keywords=art+dj+pre+ii) for $50. That should technically be under $300.

Another candidate is this [Sanyo] (http://dayton.craigslist.org/ele/4818198144.html) though it seems you should ask for a lower price.

u/LucknowLars · 1 pointr/vinyl

Sorry I missed your question. I don't have any first hand knowledge but I've heard good things about the Art DJ Pre II.

http://www.amazon.com/ART-II-Preamplifier-Output-Switchable/dp/B000AJR482

I don't think either of the two you linked would be bad though.

u/2old2care · 1 pointr/audio

The replacement stylus you linked to is also a moving-magnet type, so it should require a similar preamp.

This one has the ability to provide extra gain so would probably work better for you. If you have "hiss" and not "hum" then that is probably coming from your preamp.

u/jeremybryce · 1 pointr/DaftPunk

Hit up craigslist.. it may take sometime to get the best bang for your buck but there are tons on there.

If you plan to connect it to your current home/audio setup pickup a phono preamp as well. This is the one I have that works well enough.

u/PopandLocke · 1 pointr/vinyl

Based on your recommendation that I look for something with a "subsonic filter" or something similar, I've bought this:

http://www.amazon.com/ART-II-Preamplifier-Outputs-Switchable/dp/B000AJR482/

It looks like the "low cut filter" is what you're talking about, and I figure it's $40 and very well-reviewed around the web, so I can't really go too wrong. Thanks for the info and I'll report back on my impressions!

u/Patadori · 1 pointr/vinyl

Is a receiver a preamp and amp combined into one?

I read a different online guide that suggested
https://www.amazon.com/gp/product/B0049P6OTI/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

and

https://www.amazon.com/gp/product/B000AJR482/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Hooked to the turn table and then to a pair of speakers.

Would that work?

Sorry for the elementary questions...

u/arcella12 · 1 pointr/vinyl

So I just received my first turntable today and set everything up and I love it! However, I have noticed a lot of distortion when the music gets loud across all levels. It becomes very difficult to differentiate each layer. I feel like my tracking weight and anti-skate may be the culprits but I can't figure out the perfect combination of the two.

My setup is as follows:

  • Turntable: Fluance RT82
  • Preamp: ART DJPREII (grounded to turntable)
  • Receiver: Denon AVR X2100w
  • Speakers: Bowers & Wilkins 683 s2 Tower Speakers

    I'm really hoping I didn't accidentally damage the stylus during setup because it did accidentally fall into the rubber mat. The sound is great when the music is at a quieter point so I don't think it would be that, but I could be wrong. Any help is appreciated!
u/Midgetforsale · 1 pointr/vintageaudio

Looks like that stereo only puts out 50 watts total, so 25 watts per channel. That's pretty low, but it shouldn't hurt your speakers. You could use the stereo and those speakers to play cds, stuff off your phone, etc. What you cannot do at this point is use this stereo with your dad's turntable. A turntable outputs at very low power. You could plug it into the stereo aux input, but the sound would be very small. You have two options if you want to use the turntable, first you could buy a phono preamp. I wouldn't spend less than 50 dollars and at that range this one is recommended often. You would plug the turntable into this preamp, and then use rca cables to plug the preamp in to the stereo. That would work.... okay. The stereo will still be your real weak point here. So your other option is to find a different receiver with a built in phono preamp. What did your dad use to power to turntable and speakers? If he has an old receiver left over from the 80s, it could be a real gem! Even if it is a lower end receiver from back then, it will probably produce much better sound than that Walmart stereo. If he doesn't have the receiver anymore, go check out thrift shops. You can almost always find vintage stereo equipment for pretty cheap at thrift shops and flea markets. Look for names you've heard of before and you'll probably be fine. See if they will let you test it first. Make sure it powers on, hook it up to some cheap speakers if they let you and see what kind of noises it makes. Turn the dials. A lot of old receivers will produce static when you turn the dials, but this is an easy fix (spray it with deoxit!). Even if you can find like a Denon or Onkyo or something from the black plastic era, if it has a phono input you'll be better off.

u/SluttyRonBurgundy · 1 pointr/vinyl

The ART DJpre II seems to be the agreed-upon standard for low-cost pre-amps around here. It costs more than the Behringer but it will last much longer and has more features.

u/_walden_ · 1 pointr/vintageaudio

Good thinking. I put this guy in my cart earlier today. Maybe I'll have to bite the bullet.

u/RoyTheGeek · 1 pointr/vinyl

I just placed an order for these items:

https://www.amazon.com/gp/product/B00B1VB0G0/

https://www.amazon.com/gp/product/B0006VMBHI/

https://www.amazon.com/gp/product/B001LQSFKY/

https://www.amazon.com/gp/product/B000AJR482/

I gave up on the container because of the price, I'll have to find something else. Are all the items good? Have I forgotten anything?

u/remembertosmilebot · 1 pointr/vinyl

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/gp/product/B00B1VB0G0/

https://smile.amazon.com/gp/product/B0006VMBHI/

https://smile.amazon.com/gp/product/B001LQSFKY/

https://smile.amazon.com/gp/product/B000AJR482/

---

^^i'm ^^a ^^friendly bot

u/Shaddex · 1 pointr/vinyl

Hi everyone, I'm from Ontario, Canada, and I'm brand new to turntables. I've purchased all of the following:

  • Technics SL-B2 Turntable

  • Audio- Technica AT95E Cartridge

  • ART DJPRE Phono Preamp

  • Micca MB42X Bookshelf Speakers

    All I need now is a power amp, right? The place I went to only had one within my budget of ~$150 CAD, that being a Sony TA-N511 for $80. I couldn't find much information about it online.

    Is that power amp okay, or should I return the DJPRE and get a receiver instead? How do all of my other components look?
u/Landohh · 1 pointr/vinyl

So finally getting an upgrade! Found a nice Sanyo TP-1005 on craigslist near me and the guy says it has a semi new cart and new stylus on it and it works great. I'm going to his house after work tonight to pick it up for 40-50 bucks.

So now I need to get a phono preamp and a record maintenance kit. After rocking a dinky TT I found at a garage sale for about 4 years now, I am pretty excited to start taking care of my records and having a decent TT.

Looking at this care kit https://www.amazon.com/gp/product/B01DVQIINA/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ADJEB5748Q675

and this preamp
https://www.amazon.com/gp/product/B000AJR482/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

Again I am on a budget but all together the new TT, preamp, and care kit I'm at about 120 bucks for a brand new setup. Just wanted your guys' opinion on this preamp and cleaning kit

u/changethelocks3x · 1 pointr/vinyl

I ordered the Pro-ject Debut Carbon DC, and I was sent the Pro-ject Debut Carbon USB. I already have a pre-amp (ART Pro Audio DJPRE II), and I have no interest in the USB functionality. Should I exchange the turntable for the one I actually ordered? Thanks!

u/taintitgrand · 1 pointr/vinyl

Unless you’re plugged into a “Phono” input on a reciever, you’ll need a phono pre-amp, this one is a favorite inexpensive one around here.

u/Kersed · 1 pointr/vinyl

Thank you for the suggestion. It looks like it 47.00 with a lot of great reviews so I think I may be getting this one. Appreciate the help.

u/ComicallySolemn · 1 pointr/vinyl

I just did the same! I upgraded from my old 1978 Realistic all-in-one 8-track, radio, and record changer to a Pro-ject Carbon Debut DC. I purchased the ART DJPRE II Phono preamp from amazon and found some Pioneer SP-BS41 speakers for cheap on newegg. I greatly recommend the preamp and speakers for the price. The sound I get now blows my old setup out of the water in both fidelity and volume!

u/gatesphere · 1 pointr/vinyl

I am! I'm using the ART USB Phono Plus and I love it. It is admittedly overkill, though -- internally it has the same preamp circuit as the ART DJPre II.

I grabbed the USB Phono Plus over the DJPre II because the Phono Plus also has a USB output and a built in headphone amp. My setup didn't have a headphone output and I wanted to listen at night without waking the neighbors. The USB output is also a plus because I like to digitize some of my thrift finds for kicks, and I want to be able to do that even after I eventually rip out the built-in preamp (haven't done that quite yet, but I've been inside my TT -- looks super simple, even with my rusty soldering skills).

I'm really impressed with the ART, though. It has great sound for my price range. Much nicer than the built-in preamp to my ears.

u/Oseltaeb · 1 pointr/vinyl
u/stenseng · 1 pointr/vinyl

I disagree - I've got the Pro-Ject Audio - Phono Box MM, it's 99 bucks, and sounds fantastic!

https://www.amazon.com/dp/B000YEK1AQ/ref=cm_sw_r_awd_Uuqiub0Z7YYY6

u/flamingsushi · 1 pointr/vinyl

Hey there, I want to get a turntable but I'm not sure if I should get a dedicated pre amp + amp or a receiver.

I'm going with a Pro-ject Debut Carbon and I'm considering the following options for pre amp + amp / receiver:

  • Onkyo A9010 receiver
  • Pro-Ject Phono Box MM Amplifier + Magni 3 amp

    pre-amp + amp combo is cheaper, but then I wouldn't be able to plug speakers in the future (which I might buy eventually). Currently I only own a pair of DT 990 pro, so the Magni would serve me well.

    Would I get better sound from the Onkyo or the pre-amp + amp?
u/ChanceMan · 1 pointr/vinyl

Absolutely! This is my first table as well and I love it. /u/adayinalife has the right idea, you'll benefit from some extras. For sure get a pre amp to actually hear anything unless you have an amp with a phono input already.. Totally spaced that when I got the Carbon and everything was reeeeaaaaalll quiet when I played anything... Pro-Ject makes this bad boy and I'm happy with it. It's another giant plug to deal with just fyi, not a bad trade though: http://www.amazon.com/Pro-Ject-Audio-Phono-Pre-amplifier-Black/dp/B000YEK1AQ/ref=sr_1_1?ie=UTF8&qid=1462769766&sr=8-1&keywords=project+phono+amp

u/Slyver08 · 1 pointr/vinyl

Yes, indeed - my question was regarding the case if I end up buying an LP120 (because it's the one I'm eyeing right now). Now I got from another thread that my HT-R330 wouldnt do the job as for preamp and I've looked into preamps (there are SO MANY models!) and found this one. Would you recommend it for a "beginner setup"? Reviews in general seems quite positive and I'm not looking into getting a >1k$ setup for now.

If not the LP120, I'm also looking into a Project Debut Carbon DC - I'll have to wait a little more as TT are hella pricey in Canada, but from what I read the Project seems to be worth the wait over the LP120.

u/mjmilino · 1 pointr/vinyl

I actually got a Pro-Ject Preamp. I was only able to listen for about 15 minutes, but Side A of "It Still Moves" by My Morning Jacket sounded great!

u/TheDragonKnight · 1 pointr/audiophile

Will this be a decent pre-amp? Really not sure what to look for... any suggestions around that price point?

u/strategicdeceiver · 1 pointr/audiophile

you just need a phono preamp and maybe a source selector to switch between the turn table and whatever other source you would want. The JBL's have a built in amp.

here is a phono preamp

here is a source selector

u/SneakerSwas · 1 pointr/vinyl

Soooo, if I understand correct, I could buy this:


Pro-Ject Phono Box MM DC Phonograph Preamplifier,Black https://www.amazon.com/dp/B000YEK1AQ/ref=cm_sw_r_cp_api_i_m3cXDbXB0TS7P

Then run 3’ (or maybe 6’?) cables to it, and then 6’ cables from that to the receiver?

Thanks a lot!

u/Vinnie_Sinistra · 1 pointr/vinyl

So, with my pro-ject debut carbon, I could just use a pre-amp? like this [one] (https://www.amazon.com/dp/B000YEK1AQ/ref=nav_timeline_asin?_encoding=UTF8&psc=1) . And i could just hook my speakers to this?

u/mawnck · 1 pointr/vinyl

I hear good things about this guy. https://www.amazon.com/Pro-Ject-Phono-Box-Preamplifier-Black/dp/B000YEK1AQ

Anyone else have suggestions?

u/Azhdar · 1 pointr/vinyl

Hi, I bought myself a Pro-Ject Essential.
Tried it on my amp I had at home Yamaha HTR-3066 but it didn't work so I added a Pro-Ject Phono Box MM DC but it's still not working.

Can I play my turntable on this Amp if so how ?

u/spleenandcigars · 1 pointr/ProgVinyl

I'm a broke college student myself hahahaha well, i brought the LP120 but regretted it. It's cheaper than the one i think it's the best right now. The Pro-Ject is the best entry level one right now, crushing even more expensive turntables. You will also need this (or other, if you have a favourite) phono preamp.


Is a bit more expensive than the LP120 that already has a built-in phono preamp with line output, but if you search online, you'll see that the antiskating doesn't work properly. The internal preamp has a muddy sound and people tend to remove it. It's bulky and quite heavy.


If you don't understand what some thinks i mentioned is, just ask.

u/Roujj · 1 pointr/vinyl

Hi, I need some advice with hooking up speakers to my turntable.

I'm very new to all of this and I've only brought my turntable so far. This is because I'm not entirely sure whether I need to buy a preamp and an integrated amplifier, or just one of these. I think I need the integrated amplifier regardless, and the preamp will make it sound even better but is optional. Am I correct with this or not at all?

Anyway, the turntable I have is a Denon-DP300F and I'm looking to buy a pair of Misson LX-2 speakers. I was also looking to buy a
Denon PMA520AE Integrated Amplifier with a Pro-Ject Phono Box MM Amplifier - where I would connect the two red and white cables from my turntable into the Pro-Ject Phono Box preamp, then connect that to the integrated amplifier, and then connect it to the speakers. Excuse my most likely horrible wording/terms.

Is this the correct way to go about this? Is the preamp I'm looking at buying optional or compulsory? Do I just need the integrated amplifier and not the phono box preamp?

I really, really appreciate any feedback on this because I've been reading this sub and researching everywhere and I can't find a definite answer that makes me confident about making these purchases. Thank you!

u/Edmund_Heckler · 1 pointr/vinyl

This is the amp I have. I think it's great, although I'm not an audiophile. It got very good reviews for being an excellent value for the price.

There are some excerpts from reviews on this page.

u/melikeum · 1 pointr/vinyl

I've heard good things about Bellari pre-amps and having a headphone amp is definitely a nice feature. People seem to mention the VP130 a lot but I'm not sure how it compares to the model you listed.

What kind of speakers will you be using with this setup?

u/svene · 1 pointr/audiophile

So it goes GA-Z97X-UD5H motherboard(Realtek ALC1150 115dB SNR HD Audio, which looks to have nice audio) - > aux cable - > Bellari Tube Phono Preamp - > yamaha htr-5730 - >bronz 2's

Seens really weird this keeps happening. Makes me want to give up on higher quality audio because of the failures I've had so far. I really don't see any reason these should be failing like they are. Like you said, as far as I know, It shouldn't damage it from distortion at low volume. At least the 2nd time. The first time I did hit a high volume for maybe 3 seconds, but that's enough. This time it was never at a high volume. Not really anyway, not at one that I thought could hurt these speakers.

If I turn my computer volume all the way up, and the media player all the way up, and then the amp only at like very low sound, it is distorted to hell but quit. I was just testing. For music playing I decided to play the computer at 20 percent volume, media player 100 percent volume. and then rotating on amp to whatever volume I wanted per album. Everything sounded good. Really great sound. Then, after I finished the movie, adjusting during the higher volume peroids, I went to bed. I woke up the next day to the rattle I had experienced earlier with the bronz bx2's in the past. A rattling sound. The audio files are generally FLAC files.

Edit: Maybe the horror movie did it. It went from quit to loud sometimes. as those movies will do. But in my subjective opinion I don't think it was enough to damage anything. I was being, I thought. conservative about the hole thing. I didn't feel like I was pushing them that far.

u/deepestcreepest · 1 pointr/vinyl

I've never actually owned one of these, but they have them for demo purposes at one of the shops in the area:

http://www.amazon.com/Bellari-VP130-Preamplifier-Headphone-Amplifier/dp/B002TD4GME/ref=sr_1_sc_2?ie=UTF8&qid=1451701608&sr=8-2-spell&keywords=phono+preamp+headphpone+amp

Plugs directly into TT that does not have a pre-amp, and gives you headphone amp.

Otherwise, to go the tubeless route would be cheaper. Pretty much any decent receiver/preamp will have a phono pre-amp and the ability to drive higher impedance headphones.

u/jamalstevens · 1 pointr/vinyl

You could add something like this into your mix:

https://www.amazon.com/gp/aw/d/B002TD4GME/ -$200+

https://www.amazon.com/gp/aw/d/B000BBGCCI/ -$76

It would go between your lp120 and amp. You'd want to turn off the lp120s preamp (it's supposedly no good anyways) and then you'd be good to go!

(P.s. there are a bunch of things like this, the bellari rolls vp29 has headphone out but no variable output volume so you'd need a headphone amp, but that thing is only $49ish so you could do it)

u/ledzep18 · 1 pointr/audiophile

Hello!

I currently have a Bellari VP13 preamp:

http://www.amazon.com/gp/product/B002TD4GME/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I'm looking to upgrade. Can anyone tell me if the Schiit Mani would be a good way to go? Or is this at a level below the Bellari? If it's below can you recommend something better?

I'm semi clueless so please educate me.

u/ThePrimeSuspect · 1 pointr/makinghiphop

Just also to clarify to OP or anyone else who's new at this that the mixer in the first step can be anything with a phono ins, even this $15 phono preamp. You only need it to bring up the signal from the turntable. Also, the plural of vinyl is vinyl (it needed to be said).

https://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_3?ie=UTF8&qid=1485790479&sr=8-3&keywords=phono+preamp

Edit: I see that the MPC Renaissance has a built in phono preamp, so you can route the turntable directly into the MPC Renaissance.

u/tlz81389 · 1 pointr/audiophile

I'm looking for some sort of auxiliary cable switcher to use at work to switch between listening to music on my phone and my computer.

I found this post and that seems like the product I need but I was wondering if there was a cheaper alternative? or is that one the best quality for around that price range? I know nothing about amplifiers. is a preamp the same thing as an amplifier? I'm listening to music on my Sennheiser HD598's btw.

how is this one?

thanks

u/wooooodyallen · 1 pointr/audiophile

I have some old speakers (technica) that only have speaker wire connections. I hooked them up with some speaker wire to something pretty similar to this pre amp

https://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_1?ie=UTF8&qid=1474392756&sr=8-1&keywords=preamp

using these connectors

https://www.amazon.com/Bluecell-10pcs-Phono-Terminal-Connector/dp/B00SSZERWQ/ref=sr_1_3?ie=UTF8&qid=1474392812&sr=8-3&keywords=speaker+wire+to+rca

and it works only a little. The volume can't really be adjusted and has to be very low for it to be listen able, higher up it is staticy/kinda gross sounding. Is it just a shoddy job with the splicing or do I need to upgrade the preamp/ I don't really know.

any help appreciated!

u/beef0walk · 1 pointr/vinyl

Definitely get a phono preamp, they start at about $15 online, here is a cheap one. You need one of these to get proper sound from a record, wikipedia explains why pretty well. This is a required part of a vinyl setup, not only will it correct the frequency response you get from your records but you speakers will also be a lot louder.

u/msuts · 1 pointr/vintageaudio

You can get serviceable speakers very cheap. If you don't want to go through the legwork of buying used: https://www.parts-express.com/6-1-2-2-way-bookshelf-speaker-pair-and-hi-fi-mini-amplifier-bundle--300-6534 AND https://www.amazon.com/Pyle-Phono-Turntable-Preamp-Preamplifier/dp/B004HJ1TTQ/

Or just go to a couple of garage sales and buy the speakers + receiver you'll inevitably come across at one of them. Just make sure it has a phono input and you're good to go.

EDIT: I see you already have that amp. You won't need the receiver then. Just a phono preamp and speakers. https://www.parts-express.com/dayton-audio-b652-6-1-2-2-way-bookshelf-speaker-pair--300-652 For the Dayton speakers alone. For $42 with the phono preamp, you're up and running.

u/Lanark77 · 1 pointr/vinyl

If you have passive speakers you are gonna need a phono pre-am like this. You will also need an audio amplifier like this to power the speakers. Recently set up a 45 station, and this set-up worked a treat with my Advent Loudspeakers.

u/PriceKnight · 1 pointr/VinylDeals

Price History


  • PYLE-PRO PP444 Ultra Compact Phono Turntable Preamp   ^PureLink
    CamelCamelCamel - [Info]Keepa - [Info]Discogs

    _
    We don't Horse around here.
    ^(Info) ^| ^(Developer) ^| ^(Inquiries) ^| ^(Support Me!) ^| **[^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2FVinylDeals%2Fcomments%2Fd20jg9%2Fbuydig_teac_tn400s_black_bordeaux_or_walnut179%2Fezulr0c%2F%0D%0A%0D%0A
    %0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)**
u/lfcXstar7 · 1 pointr/vinyl

Hey thanks for the response! Would something like this be good for my small, temporary setup?
PYLE-PRO PP444 Ultra Compact Phono Turntable Preamp https://www.amazon.com/dp/B004HJ1TTQ/ref=cm_sw_r_cp_apa_jxgzzb5AQ9ZA5
Cheers!

u/RaymondLeggs · 1 pointr/BudgetAudiophile

Maybe a pre-amp and amplifier is more appropriate for those speakers? Don't be afraid of budget Pro audio/DJ stuff it has good reviews. Receivers tend to not be suitable for demanding speakers unless they are very expensive.

https://www.amazon.com/Rockville-PPA20-Professional-Pre-Amplifier-Crossover/dp/B0732PQSQN/ref=sr_1_2?ie=UTF8&qid=1549578817&sr=8-2&keywords=rockville+preamp

https://www.amazon.com/Pyle-Phono-Turntable-Preamp-Preamplifier/dp/B004HJ1TTQ/ref=sr_1_9?s=aht&ie=UTF8&qid=1549578876&sr=1-9&keywords=Phono+preamp

https://www.musiciansfriend.com/pro-audio/gemini-xga-4000-power-amplifier

If you only have $300.00 and you want new this is basically what you can get, a powerful integrated will run you at least 500-600.00.

u/Bradlyeon · 1 pointr/TheFence

My take on the Essential III is that you can get a whole lot more turn table for not a whole lot more money by getting a Debut Carbon. I think an Essential III is $350 and the Debut Carbon is easy to find for $400. 50 bucks more buys you a way better cart/stylus and an overall better build. No built in Pre-amp, but It's better to spend the extra $50 on a better table and get an external preamp or an amp with a built in phono-stage. If you don't want to throw a bunch of $$ on a preamp, you can get a decent enough one for very cheap

The only caveat is if you play a lot of 45rpm records. If you do, the Debut Carbon is a pain because you have to lift the platter to change the speed. Other than that, it's an amazing table. I don't really ever see myself upgrading from mine.

u/breakfastinamerica10 · 1 pointr/vinyl

Noob question. I recently bought a Realistic Lab-420 turntable from a guy (he made a video of it over here) and this is my first proper turntable. I understand that there are no speakers connected to this turntable. I have a bluetooth speaker that I can use for now (until I save up enough for a better sound system), or some other speakers with AUX inputs. He told me I would need this preamp to use it. So, if I'm understanding this right, I need a wire to connect the turntable to this preamp, and then another wire to connect the preamp to my speaker? Which wires are those?

u/jimbob_9245 · 1 pointr/vinyl

My mom upgraded her stero setup a couple years ago and I incorporated it with our TV system so the audio from our TV plays out of the stero. She had a turntable with her old receiver that still works, but isn't compatible with our new stero. After doing some research, I think the issue is that we need a preamp to connect the old turntable to the new receiver (I guess the old receiver had one built in). Would it just be easier to get a new turn table? (the old one is probably over 20 years old) even though it is still functional? Am I right about needing a preamp? I was looking at this preamp. I know my mom likes the "warm" (not sure how to describe it) sound of vinyl records but she is by no means an audiophile and doesn't listen to records very often so I don't need anything to premium. I'm looking to get this all set up for her for mother's day, and I will be paying for it (I'm a student in highschool) so I won't be able to afford anything too expensive. Any help is greatly appreciated. Thanks!

Here's some pictures of her old reciever, the turn table, the connections that the turntable uses (it doesn't have a power plug?), and the new reciever that we plan on plugging it into.

u/yashchand · 1 pointr/audiophile

Oh yeah, it's not gonna sound like shit lol, but having a separate one would be considerable better, they wouldn't put something horrible in this thats for sure.

The one inside the speakers is probably something along the lines of this quality

https://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_2?ie=UTF8&qid=1493572429&sr=8-2&keywords=pyle+preamp

I had that one for my old techics setup, it works and sounds decent

u/annoying-dog · 1 pointr/vinyl

I have a old bic 980 turntable that I just replaced the parts for and it works great. It was a little too quiet plugged into my speakers so I purchased a pre amp for it, and now it is too loud for just casual listening. My turntable, speakers, and pre amp all do not have volume control on them. This is what preamp I have.

Question is, what would be the best way for me to go about controlling volume? not looking to spend too much, I suppose my options would be a different speaker setup with volume controls on it, or I saw something like a inline volume control for the audio cable. Let me know if i have any other options or if you have any recommendations. Thanks.

u/jollythan · 1 pointr/audiophile

Thank you for the fast response! So when switching to a preamp I'll just have to control the volume from the speakers themselves instead of a receiver?

http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_2?ie=UTF8&qid=1419307631&sr=8-2&keywords=phono+preamp

found that one and it seems to have a lot of good reviews. I assume the set up would go TURNTABLE > PREAMP > RCA TO XLR > SPEAKERS?

u/njcreegan · 1 pointr/vinyl

I have an old Pioneer PLD-115 that sounded great when I ran it through my amp/mixer & passive speakers. Recently, I've tried to run it through a set of Bose Companion 5's I have (powered speakers). I'm doing this through a cheap preamp I got on Amazon. The sound is incredibly treble-y and has lost all of it's quality. Is this a factor of the pre-amp I chose, or are the Companion 5's that incapable of being a part of the set up?

u/Stickerino · 1 pointr/vinyl

78 RPM

Recently I was crate digging in the bargain section at my local record store and came across a box full of 78s, which I believe were around $1 each. That got me thinking about old Victrola credenzas and me fantasizing about playing 78s. I use a Technics SL-D3 direct driven TT to play on, but have a Sanyo TP-1005 belt driven TT with a worn out belt and broken plastic on the headshell, but otherwise good condition. I then thought that I may be able to play 78s using that as my 78 table with a dedicated 78 cart. I proceeded to research methods online, and found that I could using vinyl electrical tape or even a plastic straw on the motor to make it spin fast enough. I’m on quite a budget right now at around $50-$60 for a cartridge and stylus (I have an extra Technics headshell), new belt, and phono preamp, since there is only one designated phono slot on my receiver and an empty auxiliary slot. Would these materials work?

Cartridge and stylus: https://www.lpgear.com/product/AT9578.html

Belt: https://www.dynamiclamps.com/products/turntable-belt-for-sanyo-models-tp-1005-tp-1005a-tp-1010?utm_medium=cpc&utm_source=google&utm_campaign=Google%20Shopping&gclid=Cj0KCQjwoebsBRCHARIsAC3JP0JEMLXAY-CBIPME2e4-HxbYCI-Akxa9tG1blERFI_a6DAHjJJyFT5UaAuDZEALw_wcB&variant=326796541967

Preamp: https://www.amazon.com/Pyle-Phono-Turntable-Preamp-Preamplifier/dp/B004HJ1TTQ/ref=sxin_6_ac_m_rm?ac_md=0-0-cGhvbm8gcHJlYW1w-ac_d_rm&keywords=phono+preamp&pd_rd_i=B004HJ1TTQ&pd_rd_r=35fc19dd-7c83-4a6f-be24-2f5619c7f8fc&pd_rd_w=hAVuJ&pd_rd_wg=9wPna&pf_rd_p=73c1eab1-1449-4c6d-b922-1dce21aded6d&pf_rd_r=1ND269BMGWJ6A5VV2Z34&psc=1&qid=1570424193&sprefix=phono+pr

u/kbeano · 1 pointr/audiophile

I'll try fiddling with the tone controls. I have before heard the volume reduction issue, went up and touched the case of the amp with my hand, and it resolved itself.

Seems like the cheap phono stages I've seen (example,example) won't accept the low output of my Denon cart... and I'm not willing to shell out $100+ for an experiment. If I'm spending that, I'd rather replace the amp, but I also struggle to find modern integrateds at a reasonable price point that accept MC carts.

My previous table (project debut carbon DC) ran an MM cart and that section never gave me any issues, though the table exhibited that ground hum many people have reported. When you say failing phono stage, might that be failing caps? Oxidized circuits? I wonder how viable it might be to repair.



u/theacctpplcanfind · 1 pointr/audiophile

Absolute newb here. I have a technics 1200 mk2 that I'd like to start setting up for mostly casual vinyl listening (lots of shoegaze, ambient, acoustic). I've been using it with this cheap preamp, which was fine volume-wise but strangely kept picking up radio background noise that I could hear through the music. I'd like to replace it now, but I'm not sure what to look for, would appreciate suggestions for sure. Cartridge suggestions welcome also. Budget very flexible.

u/z3rocool · 1 pointr/audiophile

That cable will just take any 3.5mm headphone jack and split it to the 1/4" jacks.

The only reason I suggested a dock is because from what I remember sound quality coming out of the dock connector is better than the headphone jack. ( Do some research, I just vaguely remember reading about this 5 years ago, things might of vastly changed - I don't own any iproducts )

If/when you get a record player, you will most likely need a phono preamp. http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_1?ie=UTF8&qid=1370021288&sr=8-1&keywords=phono+preamp for example (just the first one I found)

I would pick up a RCA selector(you might have one at home) when you have more than once device. You might want one now so you can easily plug your computer in. The output of the RCA selector would use a rca -> 1/4" jack. You would also get a 3.5mm->rca cable. (one for each device if you don't want to be switching them out all the time)

This is by no means the audiophile route, but it's the economical route to having your music sound better than everyone else (Unless you know audiophiles).

Most audiophiles are more concerned about numbers and looks, not how the music sounds (well the numbers and looks change how they perceive the music - http://www.matrixhifi.com/ENG_contenedor_ppec.htm * the thing to really take away from that article is that - the most important part is the speakers, not all the other crap)

u/GeckoDeLimon · 1 pointr/vinyl

You are correct. The amount of electrical signal actually produced by the little squiggles on the record is very small. 50 milivolts at the most. In contrast, the level that a CD player or iPod can create is more like 2000 milivolts. And in order to fit more music on a record, they intentionally reduce the strength of the bass in the recording. Low frequencies require that the needle does a lot of wiggling and those wiggles take up more physical space.

What you need is a preamp. This will add in the appropriate equalization and bump up the signal to a level that the Marshall Stanmore can work with. There are a number of inexpensive options available. Personally, I'd go with this little guy:

http://www.amazon.com/PYLE-PRO-PP444-Compact-Turntable-Preamp/dp/B004HJ1TTQ/ref=sr_1_1?ie=UTF8&qid=1425592172&sr=8-1&keywords=phono+preamp

It's not going to win any awards with the audiophile illuminati, but it'll get the job done quietly and unobtrusively.

u/BigTuna117 · 1 pointr/vinyl

A Phono Preamp (like this) will do the job I think, I don't have much experience with preamps, the others here may be able to provide more insight. There are MANY different preamps out there, at every price range. So give it a look! The preamp will output at line level, so it ought to work just fine.

If you go to ebay, amazon, etc. just search "Phono preamp" and see what you find.

u/sulfater · 1 pointr/vinyl

https://www.amazon.ca/gp/aw/d/B004HJ1TTQ/ref=mp_s_a_1_1?ie=UTF8&qid=1483597904&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=preamp&dpPl=1&dpID=41DV2C09%2B7L&ref=plSrch Like one of these? I have this, but don't have it hooked up because I need more cables. If I use this combined with my amp should I be good? Total noob to all this :(

u/PenguinontheTelly · 1 pointr/vinyl

Thanks! Would this work decently?

u/brandjohns · 1 pointr/vinyl

Total noob when it comes to gear and set up, but I've got a turntable with a built in preamp and my speaker has an auxiliary input so I can use my headphones.

I am upgrading speakers and while I know the speakers can function without a preamp, I want to buy a preamp to be able to still use my headphones and am wondering if this preamp will be capable of doing so (with the proper cord)?

https://www.amazon.com/Turntable-Preamp-Preamplifier-Amplifier-Control/dp/B004MIY372

u/chubbychic · 1 pointr/vinyl

I have a similar setup (powered speakers with preamp), and I have to control the volume on the speakers. Luckily my speakers are connected, so there's only one dial to worry about.

You could get a preamp like this one that has volume control built-in, although I've never used this one and can't attest to its quality.

u/toolazymadethrowaway · 1 pointr/audiophile

Couldn't find anything else so figured I'd ask here. I need a small phono preamp to power my turntable and go to my powered studio monitors with an aux in for my speakers. I do not need or have room for a normal sized stereo/hi-fi receiver.


This is what I could find:

TEC Turntable / Phono Preamp Preamplifier $57

Nobsound Little Bear T7 Vacumn Tube Mini Phono Stage RIAA MM Turntable Preamp $54

I'd like to keep cost under or around $100, if possible. If it has bass/treble controls, you're a hero. Your help would be greatly appreciated!

u/AverageJoeAudiophile · 1 pointr/BudgetAudiophile

/r/vinyl but be a better place try for information. I'm not sure I've seen a lot of vinyl users here.

But the Cambridge Audio Azur 551P and [Azur 651P] (http://www.amazon.com/CAMBRIDGE-AZUR-651P-PREAMP-BLACK/dp/B0079OA0UU) both seems to be a solid choice and well under your budget.

u/vinylontubes · 1 pointr/vinyl

No. The gain settings on the Mani are generally poor matched with the LP60X. It's cartridge outputs 2.5 mV. So for most receivers you don't want to exceed 38 - 40 dB of gain. The Mani only has settings of 30, 42, 47, and 59dB. The settings are either too low or too high. The Pro-Ject Phono Box DC @ $99 is better match with 40 dB of gain.

https://www.amazon.comdp/B007DB5I60

u/immanence · 1 pointr/diyaudio

Great, thanks! Thanks for the heads up on that book, that sounds great.

In the meantime, do you think something like this will keep me going for a while?

http://www.amazon.com/Pro-Ject-Audio-Phono-preamp-output/dp/B007DB5I60/ref=sr_1_5?ie=UTF8&qid=1413500822&sr=8-5&keywords=project+phono+preamp

u/Kmajch · 1 pointr/vinyl

Whats the difference between this preamp and this one? Also what other preamps are better in this price range?

u/ayeegiannos · 1 pointr/turntables

You will need a phono preamp, if your turntable doesn't have one built in. You can tell by looking at the rear, it should have a switch near the rca output if I am not mistaken.

Check out something like this: https://www.amazon.com/Pro-Ject-Audio-Phono-preamp-output/dp/B007DB5I60/ref=mp_s_a_1_12?crid=1I5IIYOM2A9N3&keywords=phono+preamp+for+turntable&qid=1556188605&s=gateway&sprefix=Phino+pre&sr=8-12

u/ocinn · 1 pointr/audiophile

I would get a Pro-Ject Phono Box DC MM/MC

http://www.amazon.com/gp/aw/d/B007DB5I60/r

u/sharinglungs · 1 pointr/vinyl

Pro-Ject Audio - Phono Box DC - MM/MC
https://www.amazon.ca/gp/product/B007DB5I60/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

It uh... boosts the signal like it's supposed to, and it gets rid of any fuzz/hums.

u/apolter · 1 pointr/vinyl

Hi all!

My current set up is a Pro-Ject Debut Carbon with a Ortofon 2M Red. Preamp is Pro-Ject brand (https://www.amazon.com/dp/B007DB5IDS/ref=psdc_689995011_t3_B000YEK1AQ) and my speakers are Edifier 1280T (https://www.amazon.com/Edifier-R1280T-Powered-Bookshelf-Speakers/dp/B016P9HJIA/ref=sr_1_3?crid=1QB3B62HWY4MY&keywords=edifier+speakers&qid=1549981297&s=electronics&sprefix=edifier%2Celectronics%2C134&sr=1-3).

I have been pretty happy with this....BUT, what would be the best way to upgrade my sound? Hypothetically, let's say I have between $500-600USD to spend on some way to upgrade.

Thanks for your suggestions!

u/Someonewithqueastion · 1 pointr/vinyl

I would recommend while starting out to get cheap and reliable pre-amps and amps, one reliable pre-amp is the Pro-ject Phono MM/MC pre-amp which is only $115. A good receiver/amp to get is the Cambridge audio Topaz AM5, It's on the cheaper size yet a really good entry level amp

u/qazew · 1 pointr/xboxone
  1. I use an hdmi audio extractor to get audio to my older sound system.

    https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072
u/timrbrady · 1 pointr/NintendoSwitch

I had a feeling, I think one of the only reasons the X1 and PS4 shipped with optical was because so many surround headsets used them on the 360 and PS3.

I know there are devices that allow you to pull the surround sound signal from HDMI onto an optical line, might be your best bet.

u/Shoe88 · 1 pointr/hometheater

You're looking for a HDMI audio extractor: https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_apa_ZYJCybMQFFVY5

Just make sure whatever you pick supports Dolby or DTS in case the cable box outputs something other than PCM. The one linked does.

Also, just like /u/Not_quite_ragnarok stated, check the cable box for a analog audio output. You may be able to just use that if it outputs audio to it at the same time as the HDMI/Digital outputs.

u/Wlraider70 · 1 pointr/techsupport

There are boxes you can use to separate the audio from the HDMI. ViewHD HDMI Audio Extractor | Optical Toslink + L/R Stereo Analog Converter Outputs | VHD-H2HSAs | Support Amazon Fire TV, etc https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_api_LNY5xb6V1PKT4

u/AnEternalEnigma · 1 pointr/PS4

Buy this. I use it for my Xbox 360 E that has no optical port.

ViewHD HDMI Audio Extractor | Optical Toslink + L/R Stereo Analog Converter Outputs | VHD-H2HSAs | Support Amazon Fire TV, etc https://www.amazon.com/dp/B00KBHX072/ref=cm_sw_r_cp_apa_Iwz6xbEXWXGN2

u/Bananas_n_Pajamas · 1 pointr/AskElectronics

Are you talking about something like this?

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

BTW my speakers are bare with just speaker signal and ground available that I'll need to solder on to

u/jkravny · 1 pointr/Chromecast

If your monitor has an audio out try it... if not you'll need an HDMI to HDMI + Audio... like this one (there might be cheaper out there... this was just a quick search): https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

u/NUwabic_Spitter · 1 pointr/hometheater
u/izy409 · 1 pointr/Comcast_Xfinity

HDMI audio is preferred but it sounds like that isn't an option because your tuner doesn't have any HDMI inputs. If your tuner doesn't support HDMI inputs then try plugging it into your TV and passing the audio out of your TV to your receiver with S/PDIF. Preferably by an optical cable but a coax cable should suffice if optical isn't an option.

If your TV doesn't support that then I don't really know what to tell you. I would recommend an HDMI audio extractor but none of them seem to support Dolby Digital Plus.

If your TV doesn't support passthrough audio then your best bet is getting a Roku 4 (the only Roku with S/PDIF optical audio out).

u/xosder · 1 pointr/Monitors

I suppose my question would be where is the HDMI signal coming from? The PS4 plugs into the monitor via HDMI using the only HDMI port on the PS4. The monitor won't pass-thru the HDMI signal to another device. You could use a receiver in between the PS4 and the monitor, but that would be much more expensive than using an optical cable to converter.

Edit: That got me thinking, and I found this.

http://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

That might do exactly what you want.

u/audiodrummerguy · 1 pointr/audio

These two items will do the trick:

  1. http://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

  2. http://www.amazon.com/3-5mm-Stereo-Female-Y-Cable-6-Inch/dp/B000I23TTE/

    You can find them on eBay, too. Also, I wouldn't recommend plugging headphones directly into a device like this; the signal will be at full volume (I'm pretty sure) and you won't have any way to turn the volume down. And those RCA outputs (red and white jacks) on the first item won't work if the audio signal from the HDMI source is more than 2 channels (like surround sound or something).

    And in case you didn't know, the reason you need a special device like the one above is because the audio signal that travels inside the HDMI cable is a digital signal, and the audio you plug into speakers or headphones is an analog signal. So that device converts the digital signal into an analog signal.
u/CarbonUnit8472 · 1 pointr/Chromecast

You could get something like this of you just wanted to use the audio portion.

u/650fosho · 1 pointr/StreetFighter

Not sure why that's happening, could be an issue with how your audio drivers handle the HDMI connection.

I dont know if this would help, but I use an HDMI audio splitter and connect to external speakers. I have an alienware which doesn't have external speaker connectors and my monitor has crap sound, so this was a work around for me, maybe it can help?

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072/ref=sr_1_1?ie=UTF8&qid=1474057598&sr=8-1&keywords=hdmi+audio+spliter

u/alltheacro · 1 pointr/gadgets

How about something like this on the projector-out side of the switch? Never tried them myself, but it was my first thought.

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

Someone might also make a switch that does it? Er...yep, looks like they do! This one gives you a choice of RCA or optical out.

https://www.amazon.com/J-Tech-Digital-Switcher-Selector-Extractor/dp/B00QJGAKCW

Again: no personal experience, both are just "first hit" examples.

I wonder how they'd work with content protection....siiiiiiiigh, HOLLYWOOD FUCK YOU

u/Creationship · 1 pointr/techsupport

Getting the PC audio to the soundbar would be easy, just run a 3.5mm cord from the output to the soundbar.

HOWEVER, after checking a few places, it seems like that TV doesn't really have any audio outputs (source). Which is stupid. And the PS4 slim doesn't have an optical audio out, also stupid.

The only thing I can really think of (someone correct me if I'm wrong) is to run an HDMI cord from your PS4 slim into a box like this, then out of the box should be an HDMI to the TV and then an RCA (red and white) cable from the box to your soundbar. I have no idea what quality that would produce, but unless I'm being really stupid I think that's your only option.

u/m4d_g0d_c4o5e7h · 1 pointr/xbox

Headset and for the HDMI audio you can use this or this.

u/NotAHost · 1 pointr/Roku

This is 99% chance a TV issue that doesn't support 'pass through audio.' HDMI is digital audio, coax can be digital/analog, but AFAIK tends to be analog for the system you described. TVs need the appropriate hardware to convert the audio and send it out, while it has become cheap and standard, it was an additional feature for TVs back in the day that you often had to look for.

Something like this should solve your problem:

https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072

u/Demache · 1 pointr/xbox

Good news, this will do exactly what you need. Its just a HDMI pass-thru but it extracts the audio to analog stereo or optical audio.

https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072

u/Arctic172nd · 1 pointr/NintendoSwitch

Something like this is what you're looking for I believe.

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

u/parthue · 1 pointr/audio
  1. You could do either of those or go with an HDMI audio splitter and then you can connect the RCA out from it to your receiver.

  2. If your receiver has individual inputs for each of the channels you can go with something like this and you should be able to get yourself some 5.1 sound.
u/Jarvicious · 1 pointr/Reaper

I'm not exactly sure I'm picking up what you're putting down, but what about something like this?

u/-UserRemoved- · 1 pointr/buildapc

Ok, I see what you're saying now. Hmmm that makes things a bit tricky. You can get something like this or this but i'm not convinced it's any different than the monitor method.

Another path may be 3.5 M/M cable, run the Xbox to your PC's mic/line ine.

u/pm_me_your_mugshot · 1 pointr/buildapc

It is completely possible you get a special connector the takes the audio out of the hdmi vord and you can use that where ever. This thing should work.

http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

u/willxcore · 1 pointr/WeAreTheMusicMakers

Not sure tbh. There seems like there could be a few different ways to do this all depending on whichever audio interface you end up using to drive the monitors.

I would start by finding an audio interface you like. I have a Focusrite Scarlett 8i6. It has balanced 1/4 inch TRS inputs and a digital RCA spdif input as well. For you to be able to monitor the inputs, the Scarlett Mix Control software has to be running, or you need a daw open with the input channels monitored.

Then you'll need to figure out how you want to get your consoles hooked up. You'll probably need something like this breakout box, or this toslink to rca spdif adapter to get the audio from the console correctly. Also you'll want to make sure your console is outputting stereo and not any kind of surround sound.

u/imadethis2014 · 1 pointr/techsupport

There is no way for the monitor to covert HDMI to analog audio out, I've never seen that "feature"

You can try an HDMI audio extractor like: http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

Your toslink/digital audio adapter should have worked - did you maybe need to enable toslink/digital audio out in the PS4 menu/setup somewhere? or maybe you just got a bad unit?

u/JamesR · 1 pointr/hometheater

Zim and born have some good ideas. Another alternative is to buy an audio breakout device like this :

http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

Might be able to find something cheaper... I'm on my phone so it's a bit tough.

u/egamble · 1 pointr/audiophile

You would need the Denon PMA-520AE or the Harman Kardon 3700, not both.

You would need something like this to get the audio out of your SACD player https://www.amazon.com/dp/B00KBHX072.

To connect your iMac you could use a USB dac, or a 3.5mm to RCA cable.

u/VanVlack · 1 pointr/Chromecast

You will need an HDMI pass through that extracts the audio if you don't have an aux/headphones out on it.

http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

As for displaying the computer and Chromecast on the same screen that is most likely not possible at the same time. The screen would have to have pip or split screen and most computer monitors don't have that but you could always check.

u/bk553 · 1 pointr/homeautomation

gotcha. Put the fire stick upstairs, peel off the audio, and run it to the receiver.

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

u/hdt80 · 1 pointr/hometheater

Sorry for the double reply, but I've done a bit more digging and I'd like to check that this would work.

Could I do an HDMI splitter, one for audio, one for video. Take the audio HDMI output and put it through an HDMI Audio Extractor, taking that optical output and plugging it into the soundbar?

u/ironfixxxer · 1 pointr/buildapc

So really you've just got your PC setup normally but want to add your Switch into the mix and use the nice speakers.

You could get this Audio Extractor for the Switch. It would grab the audio from the HDMI signal so you can connect it to your speakers. From there you need an RCA to 1/8" headphone cable. Do your speakers have an extra 1/8" input spot? Or even an RCA input (red and white connector).

u/Stiggosaurus · 1 pointr/xboxone

I doubt the USB to 3.5mm adapter will work on the XB1. However, I think you can accomplish what you're looking to do with one of these:

HDMI Audio Extractor

and one of these:

RCA Male to 3.5mm Female

EDIT: So I think I misunderstood what you were doing with the adapter. I didn't even know such a thing existed, but as long as you're not plugging the USB speakers directly into the XB1, I think you'll probably be OK. The above suggestion should still work as well if not.

u/EDGAR_SEC · 1 pointr/Twitch

Hmmm, you might need one of these things then and run the audio from it into the mixer: http://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

Then you could put that into the motherboard line in. That way only the video itself is being pulled in through the HDMI port.

u/anh86 · 1 pointr/VitaTV

I have a BT audio adapter like you are talking about. I mainly use it to listen to music in the car but I once thought I would connect the receiver to a non-BT set of headphones and see if I could listen to my Vita that way (it was just an experiment, I know the Vita has a regular headphone jack). The lag was unacceptable, I'd say around a half second. Even if you thought you could live with that, it suffered constant disconnections.

If I were you, I'd get some kind of box you can route your HDMI connection through that allows you to split the audio out to a 3.5mm or stereo RCA connection--like this.

u/repzaj1234 · 1 pointr/hometheater

Something like this?

So basically, Fire stick plugs into the adapter. Another HDMI cord from the adapter plugs into the TV. RCA Audio cables go from the adapter to my receiver? Would my TV not having Optical Toslink fuck things up?

u/Korbit · 1 pointr/techsupport

You're right that your monitor doesn't have any speakers or audio ports. DVI and VGA do not carry audio signals. In order to get sound with that monitor you'll need an HDMI audio extractor like this. After that box, you can use an HDMI to DVI cable to connect to the monitor.

u/MrEleventy · 1 pointr/headphones

You can try seeing if the PS4 will detect it when connected via USB. If not, you'll need either split off the audio from the HDMI to coaxial if you want to use the E17K's dac.

Or get a optical DAC so you can connect to E17k's amp via 3.5mm

u/pkulak · 1 pointr/sonos

Well, you could always combine this:

https://www.amazon.com/dp/B01BOB6T4E

with this:

https://www.amazon.com/dp/B00KBHX072

Now, if we could find an audio extractor that could transcode DD+ and DTS to DD, you could make up for all of the Playbar's deficiencies at once. :D

Sonos should just make one themselves. I think we're the only people in the world who are clamoring for it.

EDIT: It doesn't look like that audio splitter supports HDCP 2.2... so... back to the drawing board!

u/DZCreeper · 1 pointr/buildapc

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

Feed the RCA signal from that to your line in port. Use Windows built-in "listen to this device" setting.

u/KalenXI · 1 pointr/applehelp

There is, and it will work fine. I don't know why every one here is so against it. Here's one for $29: http://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072/ref=sr_1_2?ie=UTF8&qid=1449707019&sr=8-2&keywords=hdmi+audio+optical

It has HDMI passthrough and gives you optical DD/DTS 5.1 and analog stereo audio out from the HDMI signal.

I'm curious about your surround system though. Why does it even have an HDMI output if there's no video in, does it actually display anything on it?

u/SpliffnCola · 1 pointr/Roku

An HDMI audio extractor should work, the reviews on Amazon of these two look promising:



J-Tech Digital - Model JTDAT5CH



ViewHD HDMI Audio Extractor

u/wcg66 · 1 pointr/BudgetAudiophile

If all you need is audio from the Apple TV you can get an HDMI audio extractor : https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

This won't work with DTS-HD or Dolby Digital HD uncrompressed audio but I don't think the Apple TV outputs that.

u/JockeyOfDiscs · 1 pointr/technology

Can't you get one of these? Not ideal but you wouldn't have to upgrade your stereo.

https://www.amazon.com/ViewHD-Extractor-Optical-Converter-VHD-H2HSAs/dp/B00KBHX072

u/way2funni · 1 pointr/techsupport

use the HDMI out from your PC, Switch and PS4 and run into an HDMI switch:

​

https://www.amazon.com/GANA-Intelligent-Switcher-Splitter-Supports/dp/B0739GSKV2/ref=sr_1_4?keywords=hdmi+switch&qid=1555316855&s=electronics&sr=1-4

​

Connect HDMI out from above to HDMI IN on audio extractor: https://www.amazon.com/ViewHD-Extractor-Optical-Toslink-Converter/dp/B00KBHX072?ref_=fsclp_pl_dp_1

​

use this cable to convert your HDMI video coming out of the audio extractor to DVI and run to your LCD : https://www.amazon.com/AmazonBasics-Input-Output-Adapter-Cable/dp/B014I8UQJY/ref=sr_1_3?keywords=hdmi+to+dvi&qid=1555316493&s=gateway&sr=8-3

​

Run RCA audio cables out of the audio extractor (above) and connect to your RCA AUDIO INPUTS on your LCD - you don't need 5.1 or surround sound for onboard stereo speakers analog L/R is fine.

​

Hope this helps.

u/PinkFloydJoe · 1 pointr/audioengineering

I'm not an expert, but it looks like this will do it:

http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

You plug your PS4's HDMI into that, and then the output HDMI into the console monitor, and the audio ouput (red and white RCA) got your computer's line in jack. Then you use your windows mixer to listen to your line-in through your Razor USB headphones.

u/wag3slav3 · 1 pointr/PleX

It comes up in 1080p on my monitor, but looks really crappy. I think it's the fact that vga is analog.

To keep video quality something like this might be a better bet.

http://www.amazon.com/ViewHD-Premium-Extractor-Converter-VHD-H2HSAs/dp/B00KBHX072

u/lehyde · 1 pointr/chromeos

Not sure if this answers your question but you can just plug in something like this in your Chromecast HDMI output and extract the audio from it. The audio can then be connected to some kind of sound system. The video data from your mirrored screen would also be transmitted but no screen would show it.

u/spambakedbeans · 1 pointr/kodi

I like OSMC. The install and setup are relatively quick and painless. Buy a FLIRC to configure your tv remote with KODI. Also, if you are interested in 5.1 CH audio streams, grab a toslink on amazon. I am using this: https://www.amazon.com/gp/product/B00KBHX072/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/Rickles360 · 1 pointr/wiiu

Does your monitor have an audio out? I have the same sort of set up, and my monitor has a standard headphone jack on the back for phones or speakers. I suppose it doesn't or you would have mentioned it, but I figured it's worse asking just in case.

If not you can, pick up a device like this: http://www.amazon.com/gp/product/B00KBHX072/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1535523722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B005COKXCO&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=185MGXN5WNQE202HPZ5G

u/DarthGaff · 1 pointr/gaming

You need something that can extract audio from the HDMI cable. I recently bought a ViewHD HDMI Audio Extractor from Amazon but I have not had a chance to play with it yet. This outputs to RCA you could convert that to that ever you need.

Update: This thing works like a dream, I would recommend it.
Hope that helps.

u/AMountainDewd · 1 pointr/Twitch

If you have a USB 2.0 capture card, any audio to desktop through HDMI will have a slight delay.. so that's probably not an option.

I literally had this exact same problem OP, and I am pleased to say that I've fixed it (albeit needing more equipment than I thought I would need).

You could run a 3.5mm audio cable from the Wii U headphone jack into your mixer, but that only works for the Wii U. If you ever wanted to stream another console, you might not be able to use the same method. That's why I use an HDMI audio extractor.

I have a Xenyx 802, and here's my setup:

HDMI Audio Extractor: Amazon

Cables going from HDMI audio extractor to mixer: Amazon

Adapters for RCA to 1/4": Amazon

From PC headphone jack to mixer: Amazon

Then I just use a 1/4" to 3.5mm adapter in the headphone port of the mixer and boom -- all the audio from both desktop AND console to one headset.

Disclaimer: There may very well be a better / more efficient way to do this.. I admit that I'm still a pretty big noob when it comes to audio equipment, but this was my holy grail for the longest time, and I finally found a way to do it :).

u/MHzBurglar · 1 pointr/nintendo

Do you have a computer monitor? It works just fine hooked up to a computer monitor too. You just might need one of these to extract the sound from the HDMI output if your monitor doesn't have built-in speakers.

u/Pantry_Inspector · 1 pointr/techsupport

You could plug the Chromecast into [this] (http://www.amazon.com/gp/aw/d/B00KBHX072/ref=mp_s_a_1_2?qid=1418501290&sr=8-2&pi=AC_SY200_QL40), the HDMI into your monitor, and the rca out to your speakers.

If your current speakers have rca in, you should be set. Otherwise, get a 3.5mm female to rca male adapter and plug your speakers into that.

Quick question though. Is your computer also attached to this monitor? And if so, why waste 60 dollars making a Chromecast work?

u/skagmire · 1 pointr/VitaTV

I would recommend using a HDMI audio extractor if you can (I have this one
I was using bluetooth for a while but I got sick of the slight amount of lag with my setup.
When I was using bluetooth I swapped between a cheap bluetooth speaker and using this adapter with headphones.

I really really would recommend going with a HDMI audio extractor if you can go with a wired solution. On a plus side if you ever want to use something else with your monitor like a DVD player, Roku or Chromecast etc, then you have a solution that works with anything HDMI.

u/firsthour · 1 pointr/Chromecast

Recently bought this to plug my Chromecast directly into speakers with so we could cast Spotify without having Spotify Premium.

https://www.amazon.com/gp/product/B00KBHX072/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Now I have a Chromecast Audio just sitting around unused.

But no, I don't think you can integrate this into a video setup.

u/greywindow · 1 pointr/Chromecast

This might solve your problem

http://www.amazon.com/gp/aw/d/B00KBHX072#Ask

u/e60deluxe · 1 pointr/hometheater

what i would do is use an HDMI audio extractor on the chromecast, send optical to the receiver and assign that optical connection to the same HDMI input as the PS4.

then, change the decode mode for the PS4's input from HDMI to Digital whenever you want to swap the audio.

if you want to hear both audios at the same time you would need to go the route of hooking the PS4 to the TV.

http://www.amazon.com/gp/product/B00KBHX072

u/Delbitter · 1 pointr/Chromecast

> http://www.amazon.com/gp/product/B00KBHX072

Nice thanks! I have bought the NAS so once I have the TV I think this is the sort of thing I may need to pick up!

u/rshawgo · 1 pointr/Chromecast

I purchased something similar from amazon.com in the states a couple of months ago
http://www.amazon.com/gp/product/B00KBHX072
I have the chromecast on the HDMI imput then used a second cable to run the HDMI signal to my TV. The audio is pulled off and run into the CD imput on a very old Pioneer Receiver/Amp (VSX-9300) Then I ran the power to the converter box from a switched power input on the back of the receiver. This allowed me to power on the receiver only and then stream pandora to the chromecast/Receiver. If I want to stream to the TV, I can do that as well. So far it's working great.

u/scytalis · 1 pointr/Twitch

I have this HDMI to HDMI + Stereo/SPDIF out adapter:

ViewHD Premium HDMI to HDMI + Audio (SPDIF + RAC L/R) Audio Extractor

I have all my HDMI devices go into an HDMI switch, and have the switch's output go to this box. The HDMI out from the box goes to my TV while I feed the audio into my Yamaha MG102c mixer.

u/Chronic_Apathy1 · 1 pointr/vinyl

I have an AV receiver I use to power my receivers, but it doesn't have a phono input. Would this pre-amp be what I need to make everything work? I would need two sets of AV cables, right?

u/punsarefun101 · 1 pointr/vinyl

https://www.amazon.com/dp/B00WNLIHJA/ref=cm_sw_r_cp_api_1t6XBbYSJ2HDQ

Does anyone have this preamp? How do you like it? There is a review saying the bass isn't properly equalized, and that would be a problem for me. I'll probably get the art dj pre ii but this one is cheaper.

u/gregcron · 1 pointr/sonos

Okay thank you very much for the response. I don't have any non-Sonos speakers I plan on using.

Will record player > pre-amp > Play:5 accomplish the same thing as record player > pre-amp > Connect?

I guess I'm just planning on getting something like this, using rca male-male for the Connect or rca male->headphone (Y cable) for Play:5. https://www.amazon.com/GOgroove-Turntable-Preamp-Preamplifier-Adapter/dp/B00WNLIHJA/ref=sr_1_5

I'm thinking the extra money for a Play:5 is worth it, as I'm sure at some point I'll make use of it when I move.

u/SGM_Look · 1 pointr/vinyl

Thank you /u/sharkamino! Truly a thorough post with a lot of great info, as I'm a total noob on a budget.

I'm also considering a vintage turntable, which leaves me with two options.

Option 1:

  • Preamp - $30-70

  • 4K receiver - DENON AVR-S540BT 5.2 - $150

  • Bookshelf speakers - Dayton Audio B652-AIR 6-1/2" with AMT Tweeter Pair - $50


    Option 2:

  • Preamp - $30-70

  • Powered bookshelf speakers - Edifier R1280DB - $130



    Is there any reason you recommend the Fluance PA10 Preamp over the decently rated GOgroove Mini Phono Turntable Preamp?? https://smile.amazon.com/dp/B00WNLIHJA/ref=cm_sw_em_r_mt_dp_U_.QVWCbZ36J34S


    In your opinion, would a receiver+Dayton's bookshelfs sound better than the Edifers? Obviously the receiver gives me more versatility.
u/yo0123yo · 1 pointr/vinyl

Hello, new guy from Chicago, IL

I was looking for some advice with my first entry-level setup, prefer to buy online only.

Looking to keep the overall price under $150.
I am looking for something that can play vinyls with a good sound and quality turntable that wont die out on me within a year.

I want something that doesn't require a receiver just to help keep the price down.

Below is the setup that I am debating buying, please let me know if its good enough or if theres any other equipment that you all suggest.

Audio Technica AT-LP60-
https://www.amazon.com/gp/product/B002GYTPAE/

Logitech Speakers -
https://www.amazon.com/gp/product/B00EZ9XKCM/

Phono PreAmp -
https://www.amazon.com/gp/product/B00WNLIHJA/

Thanks in advance

u/telemasterfulll · 1 pointr/vinyl

Hey guys, I'm pretty new to vinyl and have been using the phono stage on my Onkyo TX-8020, but I'm wondering if buying a dedicated phono pre amp like the U-Turn Pluto will make an appreciable difference in sound quality?