Best automotive dash & instruments bulbs according to redditors
We found 17 Reddit comments discussing the best automotive dash & instruments bulbs. We ranked the 5 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 17 Reddit comments discussing the best automotive dash & instruments bulbs. We ranked the 5 resulting products by number of redditors who mentioned them. Here are the top 20.
Don't buy anything at deautokey. You're going to pay a 4x markup for absolutely no reason. Find the bulbs you need, and look on Amazon. I used these for my car and they had every bulb I needed minus the footwell and trunk ones. https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/Type-LM02003-60-Micro-Dash-Lights/dp/B000CRKAJW
Shitty stick-on LED lights.
I bought some LED lights from amazon that are really bright. Here is a link to what I bought: https://www.amazon.com/gp/product/B07RYPNW4G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B071LHP5WP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
It came out nice right!
Here are the bulbs
https://www.amazon.com/dp/B00KV6HKL0?ref=ppx_pop_mob_ap_share
And here are the instructions for an NA
https://youtu.be/WPQwAwtghx8
Yes you are seeing white at the turn signal lights. When I am using side marker lights, low beams or high beams. Those turn signal lights will be white. But when I turn left, right, and hazard it will be back to amber.
Front turn signal LED lights(7444NA):
https://www.amazon.com/iBrightstar-Newest-Bright-Projector-Replacement/dp/B077P5CDSX/ref=sr_1_fkmr0_2?ie=UTF8&qid=1523552526&sr=8-2-fkmr0&keywords=ibrightstar%2Bx001Cy5ax1&th=1
Front head lights type: 9003/H4/HB2. If you want fog lights it is H8(H11/H8/H9):
https://www.amazon.com/LED-Headlight-Bulb-Conversion-Kit/dp/B075J8VQDX/ref=sr_1_3_sspa?s=automotive&ie=UTF8&qid=1521933924&sr=1-3-spons&keywords=h4+led&psc=1
DO NOT remove the original manufacture Dielectric Grease on the H4 socket. Unless you using some other brand of Dielectric Grease.
Side marker lights(2) has a bunch of names too. Type 194, T10, W5W(These are also the same lights for driver side(1), front passenger side(1), back passenger(1), trunk(1) and license plates lights(2)):
https://www.amazon.com/AUXITO-Chipsets-Replacement-Courtesy-License/dp/B071LHP5WP
So, this 10 pack you will be using 8 out of 10. Remember if it doesn't work turn it 180 degree.
https://imgur.com/a/gewfk
Back Reverse lights and back turn signal lights. Type 7443 you will have to get 2 of this. Making it 4 LED bulbs.
Not to worry that the LED is white for turn light. Because the back housing is RED. So White LED + RED = Bright Red. Be warn: We didn't use resistor front and back. So, we are getting hyper flashing.
https://www.amazon.com/iBrightstar-Newest-Projector-Replacement-Reverse/dp/B06XQWPKKX/ref=sr_1_fkmr0_1?ie=UTF8&qid=1523552407&sr=8-1-fkmr0&keywords=ibrightstar%2Bx001mz3ma3&th=1
For the back lights, you will need to use the philip screw driver, the X kind. So, you can take out the housing and install the LEDs. The very top red part are turns on when you use Side markers, low beam and high beam. And those top red lights are LED already. So you don't have to change those. All you need to do is the White one and the bottom Red one for both side. So you need a total of 4 LED type 7443.
You might want to get trim tools. Unless you want to use a t-shirt and a flat head screw driver. But having trim tools can help you with wire management for heads up display and for dash cam wire. I do recommend the trim those thats 13pcs or 14pcs. Because that 1 or 2 extra tool with give you the option to pop those plugs under the front of the car if you are going to replace the fog lights(H8 according to the manual).
Other things we have:
Heads Up Display Model A8:
https://www.amazon.com/gp/product/B071418CKC/ref=oh_aui_detailpage_o01_s03?ie=UTF8&psc=1
Now you don't have to guess what speed you are on. We really hate that analog speedometer. 2018 and we still using analog. I notice they are out of stocks. Here are list of HID Model A8: https://www.amazon.com/s/ref=sr_gnr_aps?rh=i%3Aaps%2Ck%3AHeads+up+display+A8&keywords=Heads+up+display+A8&ie=UTF8&qid=1525533852
OBD2 Y-Cable:
1 is for the Heads up display, and the other one for those check warning device.
https://www.amazon.com/Docooler-16Pin-Splitter-Extension-Female/dp/B000TMCX72/ref=sr_1_7?s=automotive&ie=UTF8&qid=1523574579&sr=1-7&keywords=OBD2+y+cable
OBD2 Scanner car diagnostic tool:
https://www.amazon.com/Upgraded-Chip-WIFI-Scanner-Diagnostic/dp/B075B3CG7S/ref=sr_1_23?s=automotive&ie=UTF8&qid=1523574641&sr=1-23&keywords=obd2+check+engine
there are other ones. You might want to do your research before buying one.
Windshield wiper. Front driver side is 28 inch, Front passenger side is 14 inch. Back rear is 14 inch.
We use this brand. Since silicone last longer than rubber: http://www.piaa.com/aerovogue
We replace the whole thing for the front 2: Pick 28inch and 14inch.
Front Passenger side - 14 Inch: https://www.amazon.com/96165-Vogue-Silicone-Wiper-Blade/dp/B00JA390K4/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523575183&sr=1-1&keywords=piaa%2BAero%2BVogue&th=1
Driver side - 28 Inch: https://www.amazon.com/gp/product/B00JA39676/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
I believe this is what we got for the back. It is a refill blade. Be warn. It is hard to installed.
https://www.amazon.com/PIAA-94035-Silicone-Wiper-Refill/dp/B003NCBGYG/ref=sr_1_1?s=automotive&ie=UTF8&qid=1523575369&sr=1-1&keywords=piaa+14+inch+refill
Coolant: https://www.amazon.com/gp/product/B006YX9YZE/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
Funnel + Tube: https://www.amazon.com/gp/product/B072N5NZXS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Trim Tools 12-PCS: https://www.amazon.com/gp/product/B072HYD91Y/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Also, Scotty Kilmer use PIAA silicone wipers:
https://www.youtube.com/watch?v=3AFdUihWPCk
Optional: Dielectric Grease for the bulbs.
https://www.youtube.com/watch?v=zhl3bLzgq9A
I suppose the difficulty would depend what your local junkyard has because everything I got for my car from there was an 'option' to buyers. Lots of them came on the LTZ.
The 3 brushed aluminum pieces, leather shifter cover, dimming mirror, and heated mirrors cost me 53$
yes I got all the LEDs from amazon
Courtesy, trunk and license plate
Dome Lights
Reverse Lights
Headlights
I don't think I am going to go with LED brake lights and turn signals because I was reading on the forum that it can cause problems, and I don't feel like dealing with it.
Nice, I have summit grey as well and this makes me want to wrap the trim red as well. I just did my interior lights, plate lights and back up lights with LED bulbs. Links in case anyone is interested, I get no flicker.
https://www.amazon.com/gp/product/B071LHP5WP/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0728DYR9H/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B074M5Z9YX/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Got the headlight H4 LED from Cyclops. Looks like they're out of stock right now: https://www.cyclopsadventuresports.com/Cyclops-100-H4-LED-headlight-bulb_p_192.html
It was super easy to install and fit very well.
​
For the parking lights I got these: https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I have used these for the vanity and dash lights in mine.
D-Lumina T5 LED Bulb PC74 70 37... https://www.amazon.com/dp/B07LFZN3FC?ref=ppx_pop_mob_ap_share
Thanks! I'm trying to restore/improve it every chance I get, headlights are a good idea. I've already replaced interior lights with high quality LEDs, and installed projector courtesy lights, it really is such a nice feature for so cheap and easy to do! Next project is installing a dash/backup cam mirror kit, can't wait!
These are 194's theyll work in the trunk and the running light in the headlight housing and for license plate lights
https://www.amazon.com/gp/product/B071LHP5WP/ref=oh_aui_detailpage_o09_s03?ie=UTF8&psc=1
These are 912/921's that i put i the reverse housing
https://www.amazon.com/gp/product/B0728DYR9H/ref=oh_aui_detailpage_o03_s01?ie=UTF8&psc=1
oh i didnt even notice that you said Q50, these are for my g35 and g37's im sure infiniti hasnt changed the bulb size but id double check to be sure.
http://www.modifiedlife.com/2014-infiniti-q50-change-light-bulb-size-guide/
This site is what i usually go by and it says there arent bulbs to change.
my best advice is to yank out the OEM bulb and look for a part size, if they do indeed match one of these auxito lights, it will defintiely make a HUGE difference.
Where’d you get your cluster done at? Mines looking pretty dim but on later 1st gens they soldered in the bulbs which makes replacing them not as easy and I’m not comfortable enough to do it myself.
For the doors I got these: AUXITO 194 LED Light Bulb 6000K... https://www.amazon.com/dp/B071LHP5WP?ref=ppx_pop_mob_ap_share
They also work in other areas like the map lights, license plate lights, and I think even the bed light but I haven’t tried it yet.
I used these for the dome lights in the rear: LUYED 2 X 570 Lumens Super Bright... https://www.amazon.com/dp/B0177DD3E2?ref=ppx_pop_mob_ap_share
My AC control doesn’t have working lights either, sometimes the fan speed side comes on if I hit it but not all the time so I’d love an answer for this too.
Just so you know I have a 2007 Silverado Classic so it should match yours
Yea, I totally understand. I haven't connected the instrument cluster back yet so I do not have pictures. These bulbs are LED's and are red when lit up. I guess they are more red than orange. They wont require the orange cover on top and it wont fit them either. This is the amazon link:
https://www.amazon.com/gp/product/B00KV6HKL0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Let me know if you'd like the ones I have left and I will mail it out..
It is actually very easy. If you can remove the dash panel you can replace these.
https://www.amazon.com/gp/product/B00CDGNX26/