Best automotive wheels according to redditors
We found 96 Reddit comments discussing the best automotive wheels. We ranked the 79 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 96 Reddit comments discussing the best automotive wheels. We ranked the 79 resulting products by number of redditors who mentioned them. Here are the top 20.
Whoever downvoted you could have at least put the correct info about the wheels...they are similar to the fifteen52 Turbomacs, but these are actually the Rota Recce. That link is for white ones but they come in white, black, and hyper black in our bolt pattern. /u/Melvar_10, they cost around $700 for 4 from what I've seen (that's for 17x8 et40).
All bought on Amazon!
You may have already figured it out, but I know two people with these exact wheels. When purchased they are a Deep Red (almost matched the tail lights) but they fade into this light red/coppery red after about a year.
In all fairness, both colors look really great. But just in case you are looking into purchasing!
Konig Myth
I got these Pro Comp wheels from Amazon. They are currently ~$56. Good steelies.
Who's your plastidip guy??? I was seeing like $10+ on amazon per can and I think it said I needed 4. Can you give a link to where I could pay your prices?
Current Amazon Listing For Example
I'd buy a painted to match grille, 08+ front bumper with painted to match upper, and I'd paint the rear bumper to match.
Then I'd buy a set of black wheels (like these: https://www.amazon.com/dp/B07H9VHZPB/ref=cm_sw_r_cp_apa_KMv-BbFS6C9SF) with a nice set of oversized all terrain tires
Yeeeeeeeessss standard Fiesta steelies are 15s but MINE are 16s. They are no longer available on Tire Rack but here they are on Amazon
​
https://www.amazon.com/Aftermarket-Steel-16X6-5-finish-X46646/dp/B0799PGG55
Motegi mr 139s, all you need to do is buy the hub centric wrongs in order for them to clear which I got for 30 bucks on motegi racing website
Motegi Racing MR139 Wheel Rim Satin Black 15x7 5x100 15mm https://www.amazon.com/dp/B077FD2TYT/ref=cm_sw_r_cp_api_i_Pk0OCb432Z60A
Some basic cheap steelies
Vision 84 D Window 16x8 6x139.7/6x5.5" -12mm Gloss Black Wheel Rim https://www.amazon.com/dp/B01MXZT4QN/ref=cm_sw_r_cp_api_i_zWFmDbZ3WFQ0H
Along with spacers - Spidertrax WHS007 Blue Wheel Spacer Kit https://www.amazon.com/dp/B00BGRDMOM/ref=cm_sw_r_cp_api_i_R0FmDb97Q18P7
With bf good rich mud terains 285 75 16
My moms car tire is leaking air and I thought there might be a nail but I took it to a tire shop and they said it’s the rim that’s causing the leak. I’m looking for a oem replacaement online but I want to be certain before I order it. I found this and wondering if you guys think it’s what I need. Thanks!
https://www.amazon.com/Replacement-Front-Wheel-Mercedes-85227/dp/B01M7UTS8E/ref=mp_s_a_1_1?ie=UTF8&qid=1537826120&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=mercedes+c250+rim+oem&dpPl=1&dpID=51FBERLL8HL&ref=plSrch
"Matte bronze"
The sauce
Brand name plasti-dip anthracite grey and glosifier.
I’m running these with 33” KO2s. If I were going with 35s I would go 16/17” rims. Rule of thumb I’ve heard is about 1/2 the diameter of the tire for the wheel. 16/17 inch would be just fine for airing down. You wouldn’t notice a difference compared to the 15. It also gives you room for better brakes. You’ll want those, esp. with 35s.
As far as back spacing goes, I think you should be fine with 3.75”. I’ve got plenty of room with the 33s. I’m assuming 12.5” wide tire?
I would highly recommend ditching the track bars front and rear. Helps immensely with flex and ride quality. Steering will probably suffer though. I also am not running a sway bar anymore. I took it off and couldn’t tell a difference driving. My recommendation would be take stuff off one by one and see if you notice/like it. Taking them off with only help when wheeling it.
Goodyear Wrangler Radial Tire - 235/75R15 105S https://www.amazon.com/dp/B004QL66XO/ref=cm_sw_r_cp_apa_1TAQzb11165HQ
Tires ^
Pro Comp Steel Wheels Series 51 Wheel with Gloss Black Finish (15x8"/5x4.5") https://www.amazon.com/dp/B00DJ64ZOO/ref=cm_sw_r_cp_apa_PUAQzbCEXF0XZ
Wheels^
Rides great and gives the truck a mini lift from the stock wheels
I recently did exactly that (3 inch lift, 31s). If you're looking for ideas or reference, here is "Jade". (Mall parking lot of course. Havent taken her out since I did it)
I did it relatively cheap as far as lifts/tires/rims go. List goes as follows:
BFGoodrich All-Terrain T/A KO2 LT31X10.5R15 - $175 x 4 = $700
Pro Comp Steel Wheels 15x8"/5x4.5" $55 x 4 = $220
3 in Rough Country lift $293
Hubcentric Wheel Spacers $27.50 x4 = $110
They installed my lift at Mavis for $390 labor. It was a pretty fair deal.
All in all ~$1700.
I'm about to get a pair of Smittybilt bumpers this week.
Warning. Your fenders will rub. I'm cutting and putting flares on because I need them anyway for legal reasons.
Non-mobile: http://www.amazon.com/dp/B002UXQ5ZO/ref=redir_mdp_mobile/181-0089855-0675573
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
They’re 15s. I went with the stock size because I already had wrangler radials on there that were basically new, and I’ll just get another set when they wear out. They’re like 75 a piece at Walmart, and I don’t do any offroading, I just like the look.
Anyway, this is the link on amazon: https://www.amazon.com/Pro-Comp-Steel-Wheels-Finish/dp/B00DJ6539U/ref=mp_s_a_1_4?keywords=procomp+wheels+15&qid=1572420730&sprefix=procomp+wheels&sr=8-4
15" Inch Konig 57B Dekagram 15x8 4x100 +25mm Matte Black Wheel Rim https://www.amazon.com/dp/B07CKKLGZN/ref=cm_sw_r_cp_apa_i_ZwH0Db5VX0TB4
Here's the link the guy I bought it from sent me for these wheels. I'm not sure what the tire size is
http://www.amazon.com/gp/aw/d/B002UXQ5ZO/ref=redir_mdp_mobile/181-0089855-0675573
Depends on the tires and wheels bit it's not as ridiculous as you make it sound..
A 31" bogger weighs 57 pounds according to amazon:
http://www.amazon.com/Super-Swamper-B-113-Bogger-31X12-50-15/dp/B006YH19B2
Steel rim weighs 28 pounds.
http://www.amazon.com/Cragar-Black-Soft-Wheel-5x114-3mm/dp/B004071CKG
So 85 pounds together.
The comment says Cragar. Looks like these. I'm curious to hear why he went this route as opposed to getting the Pro Comps.
Here is the desktop version of your link
Sorry didnt add url. http://www.amazon.com/gp/aw/d/B009X20CVI/ref=mp_s_a_1_2?qid=1420636348&sr=8-2&pi=AC_SY200_QL40
I'm thinking these tires BFGoodrich All-Terrain T/A KO2 All-Season Radial Tire - 33x12.50R15/C 108R. Can a local tire shop install and take care of the sensors? These are also an option: Dick Cepek Extreme Country All-Terrain Radial Tire - 33X12.50R15LT 108Q
Edit: Pro Comp Steel Wheels Series 52 Wheel with Flat Black Finish (15x8"/5x4.5") will be okay for a JK and these tires, right?
is there any issue with using them as a main tire not just for winter replacements, like the look i guess
​
something like this
https://www.amazon.com/Aftermarket-5X114-3-finish-APPLICATION-FITMENT/dp/B01MFCBPHO/ref=pd_lpo_sbs_293_t_0?_encoding=UTF8&psc=1&refRID=2DB4T30HWB2EWK5Q4Q7P
I'm using ProComp 52 Series I got them here
I was thinking about getting these , I think they would look great but I have no clue what the tire size would be, any help?
My 2014 hatch is 5x100 and my 2018 is 5x114.3
Im getting these https://www.amazon.com/Aftermarket-5X114-3-finish-APPLICATION-FITMENT/dp/B01M71CV7B
And im going to put 225/50r17s on them
My brother got the hyperblack 17x8 4x108 +40mm offset from Amazon. He also got some hubcentric rings from Amazon.
https://www.amazon.com/PCS-ROTA-GRID-17X8-PCD/dp/B01A05DF3I/ref=sr_1_1?ie=UTF8&qid=1483971044&sr=8-1&keywords=rota+grid+4x108
They also have the flat black on Amazon
https://www.amazon.com/PCS-ROTA-GRID-17X8-PCD/dp/B01FBHVSZ2/ref=sr_1_2?ie=UTF8&qid=1483971044&sr=8-2&keywords=rota+grid+4x108
Huge fan of these. Pretty cheap, and they look sick. They also push your tires out a little bit. these