Best bike cargo racks according to redditors

I can't speak to who makes those fenders, but the rack is an Axiom Streamliner Road DLX, which I currently have on my Synapse 105.

First thought: seems a lot like the Topeak Explorer series of bike racks. The QuickLock system works great; I have a bag that uses it. Hopefully this succeeds, so Topeak releases more QuickLock-compatible stuff and also brings costs down.

Amazon. It's reasonably cheap. I had to lag-bolt mine into the ceiling as I have vaulted ceilings and it fits by compression, so be forewarned if you're in a similar situation.

Link

Posting pictures of the bike would be helpful. If you decide to do this, make sure to post a few high quality shots of your drivetrain which could show us if there's any critical wear.

However, before you post the pictures, it would be helpful to clean the bike. Get a bucket of soapy water, find a sponge or rag that you don't mind sacrificing and get to cleaning your mountain bike. Dry it off, and then post the pictures (that will make any critical deficiencies more obvious).

As others have mentioned, you'll most likely need to remove the chain. Here's a video from one of the best cycling channels on Youtube, Global Cycling Network (GCN), that shows you exactly how to do that. GCN and its sister channel, Global Mountain Bike Network (GMBN) offer a number of fantastic maintenance videos in addition to a variety of other content. If you're wondering where to get a chain tool, I would just spend a bit of extra money and get a good multi tool like the Crank Brothers multi tool which already comes with one.

Pump up the tires to see if they still hold air. If they do, fantastic. Nothing more needs to be done. If not, you'll need to get new tubes (most likely your mountain bike will need 26 in X 1.9-2.125 in tubes). Here's how to install a new tube.


As a bike commuter, you'll need a number of things to stay safe and make sure your bike stays in your hands. Here are the essentials:

1. Front and rear lights. I use this flashlight for my front light, and a rear light similar to this.
   
   
2. A helmet. From your posting history, you seem to live in Australia. All helmets sold in that country are required to meet the same safety standards so in all likelihood, spending more on a helmet will not make you safer. Buy one in a store and you're set.
   
   
3. A great bike lock. Read this to learn the proper way to lock your bike.
   
   However, staying safe is only the first part. You'll want or need a number of other items to make sure that your commute isn't frustrating. Here are some of the items off of the top of my head.
   
   
4. Bike pump. If you're going to mostly ride near gas stations which have air pumps that can inflate a tube, you probably don't need to carry around a mini pump on your rides. However, everyone should own a floor pump.
   
   
5. Degreaser. The cheap automotive kind is fine as is WD 40. This is used when you need to clean the drivetrain.
   
   
6. Bike lube. Stick with a bike specific one.
   
   
7. Disposable poncho. When I lived in an area where it often rained, I always had a dollar store disposable poncho in my backpack. It's just super handy if there's an unexpected downpour.
   
   
8. Fenders. I personally don't have them, but I live in a relatively dry climate. If you live in a place where it always rains, they're super helpful.
   
   
9. Bottle cage. A cheap plastic one is fine.
   
   
10. Tire levers.
    
    
11. Rear rack. Assuming you don't have a full suspension mountain bike and instead have a hard tail (here's an article if you're unsure), get a rear rack. Do not get one that is only mounted to the seat post like this Ibera, but rather one that connects to the bike frame. If your bike does not have any bolts that can attach, you can use P clamps to secure the rack. This post describes how to do just that.
    
    
12. Some way to transport groceries. While I use a milk crate that I ziptied onto my rear rack with bungee cords on top of the crate (similar to this setup), many others use panniers to transport groceries and other goods. This has the benefit of more storage, better center of gravity, and can be water proof. However, they are usually much more expensive unless you go the DIY route.
    
    
13. Bike bell. Cars won't be able to hear you, but if you ride in areas with lots of pedestrians or other cyclists, it's useful.
    
    
14. Spare tube. Fortunately 26 in tubes are cheap and super easy to find. Any department store with a bike section will carry them.
    
    /r/bikecommuting can be a helpful resource if you have other questions.

Get a cargo rack for your smaller bag, and carry your bass on your back. Something along these lines maybe (might depend on what kind of bicycle you have): cargo rack

Keep in mind, if it's windy, the bass will act as a sail and destabilize you (or in a tailwind, maybe help!). The reason I point this out is that I carried my bass on my motorcycle once, and it was scary. Admittedly you probably won't be doing highway speeds on you bicycle, but it's something to be aware of.

Another possibility is using/adapting a surf rack so you don't need to have the bass on your back. That might be more comfortable overall. http://www.surfertoday.com/surfing/7716-the-best-surfboard-bike-racks-in-the-world

it’s this axiom “slim” rack. it’s something that I’ve been looking for for a while. I’ve yet to have any heel strike even with my 25L pannier.

> I’m getting ready to launch a rear bike rack pannier

That's just called a rear bike rack. A pannier is the bag that goes onto a bike rack (more or less).

> Here's a picture of it

So you're selling the Ibera Bike Rack?

Just buy this

Dude take photos that people can see without having their head spin :(

Short answer is yes.. but as the other person said you need disc brake specific racks.. also not sure if it has eyelets near the gearset as can't tell from the photos..

You may be able to use this one: https://www.amazon.com/Ibera-IB-RA5-Touring-Bicycle-Carrier/dp/B00AA8GFSI/ref=sr_1_fkmr0_1?ie=UTF8&qid=1474048437&sr=8-1-fkmr0&keywords=ibera+disc+rack

The image is directly copied from an existing Rack on Amazon: <https://www.amazon.com/gp/aw/d/B002T5H8MW/>

Don't fall for this scammer.

You just need a rack with separate mounting points, one for panniers, and then a separate platform. Something like this should work.

>Cheap rack

Obviously, your budget will limit your options, but I'd say that of all components, if you're going to get one thing that's a bit nicer than the rest, get a reliable rack. You probably don't need a 150$ expedition touring rack, but getting a 45$ blackburn (actually, you can get a pretty good used one of these on Craigslist if you look) instead of a the cheapest you can find, you'll save a lot of trouble.

When I used to have really shitty racks, they were the one thing that managed to break every time I rode and caused endless trouble on the road.

And, for the love of God, do not buy this piece of junk!

What kind of bike do you have? I got one of those Ibera seatpost-mounted racks, but I actually was able to mount it to my frame since I don't have room left on my seatpost. It's been very solid so far for my commute. Here's a pic of how it's installed on my bike. Obviously your mileage may vary, and many people say to avoid these racks, but mine hasn't budged after probably 200 miles or so.

Edit: Ibera has a bag that specifically works with this rack, but I haven't spent the money on it yet. They also have a pannier set, but I'm not sure they'll work too well with this rack due to the lack of side supports. I have a small carry-on bag that came with a suitcase that I bungee down, and it can be a pain, but it works.

I second this - I ride with two Stealth 2s and they're great.

I highly recommend a helmet mount (vs. a bar mount) for your front-facing camera. You're much more likely to capture whatever shit's going on that way; a bar mount has a smoother picture but will miss anything happening to the side of your bicycle. One of the nice features of the Stealth 2 is that the camera lens rotates, so if you have to mount on your helmet at a funny angle you can turn the lens to compensate and still have a horizontal video.

For the rear mount, I used the sawed-off center beam of a seatpost-mounted back rack. There are cheaper seatpost-mounted back racks, but this particular model has a flat top, which makes it work well with the adhesive mount. I cut off everything but three-four inches from the beam, slapped the adhesive mount that comes with the Stealth 2 on there, and it's been going great even through weather for several months now.

If you have to choose between front and back for now, I'd definitely recommend investing in the front first.

Here's what they look like in daylight.

Here's what they look like during urban nighttime.

Here's what it looks like in rain.

Edit: It's notable that because the Stealth 2 uses a slide-in-slide-out mounting system, your mount-to-camera connection will loosen slightly over time from the friction of mounting and unmounting, which will cause vibration in the video after a while. I found that you can shim the inside of the mount with a strip of electrical tape, which tightens everything up nicely.

I highly recommend a rack + panniers. I just switched from using a backpack to a rack + panniers on my commute and it's MUCH nicer.

I got these:
https://www.amazon.com/Ibera-Bicycle-Touring-IB-RA4-Frame-mounted/dp/B002T5H8MW/ref=sr_1_1?ie=UTF8&qid=1473272148&sr=8-1&keywords=bike+rack+and+panniers

and
https://www.amazon.com/Ibera-IB-BA8-Bike-Panniers/dp/B0044U8W3E/ref=sr_1_2?ie=UTF8&qid=1473272148&sr=8-2&keywords=bike+rack+and+panniers

For less than $100 bucks you'll be much more comfortable.

My son uses this pannier to carry his trumpet case vertically. Sometimes we put a bungee cord around the case at the top of the rack to keep the case from swaying.

I found that the rack top is too narrow to hold the trumpet case sideway. He has this rack with separate top and side rails, so he can still mount to the rack top as the pannier is mounted on the lower side rail.

Edit: photo of the setup.

http://www.amazon.com/gp/aw/d/B000TM96MM/ref=redir_mdp_mobile


Here's one that looks exactly like mine except the brackets that hold the bikes are metal instead of felt lined oak.

Topeak Tote on a Topeak Tourist rack if anyone is curious.

http://www.amazon.com/Axiom-Streamliner-Road-Cycle-Black/dp/B0025UCXEO/ref=sr_1_3?ie=UTF8&qid=1406760876&sr=8-3&keywords=axiom+bike+rack

I went with this because I was concerned about heelstrike issues due to the seatstay angle. Turns out that it was a good choice but didn't prevent me from grazing the large bags when fully packed. Which is why I put the big bags up front and the mini's in back.

The bags are Ortlieb Backrollers.

If your Revenio 1.0 is anything like my Capri 1.0, you may want to try looking into a rack like the Axiom Streamliner Road DLX since it puts the rack a bit farther back and gives you another 4cm of clearance. As /u/ChariotOfFire mentioned, the chainstay looks pretty short and my Raleigh has a very small chainstay as well.

As for bags, I've got some Arkel Cargo panniers. I went to the nearest LBS and they were the cheapest option (the LBS is tiny, so limited stock) and only recently found out that they're intended for front racks. :p Oops. They work well enough though, hah.

Good luck!

I had exactly the same problem as you. In the end I picked up the Axiom streamliner DLX. it goes through the nit on your brake fittings, an then just on the end of your skewers.

It also moves the rack back by 4cm so you have more clearance. It's sturdy and hasn't caused any other problems as of yet.

Assuming this is your bike, you're going to have a hard time attaching racks. Maybe a seatpost bike rack will work. But they don't hold much weight. I wouldn't trust it with a laptop or college textbooks. Bikes with rear suspension really don't accommodate racks very well. If you're using your bike a lot for commuting back and forth to school, it would probably be worth trading in the bike to something more appropriate for commuting.

All this talk of bicycles yesterday made me stop for a selfie on my commute this morning. I don't ride a motorcycle, so here's my 2-wheeled steed.

This is the pier a half-mile from my work, so 9.5 miles into my morning ride. It's warm enough here to bike in shorts and a jersey in January!

• Kona Honky Inc, steel-frame with carbon fork.
  
• Avid BB7 mechanical disc brakes.
  
• Ultegra/105 mash-up drivetrain with 105 shifters and Ultegra derailleurs.
  
• No rack braze-ons and disc brakes mean I had to hunt a bit for an appropriate rack. I chose not to go with the P-clip method and instead got this Axiom rack. Panniers are axiom as well.
  
• It's a short commute, so I often just do it in exercise shorts. Thinking of getting shorter running shorts, or moving to bicycling shorts, but this works fine for now. When it gets a bit colder I'll bike in jeans, but it's been a warm January.

I kicked my panniers all the time on my last bike. Switched to a rack and is extended a little rearward and had no issues.

https://www.amazon.com/gp/product/B009VU3RAU/

I just have my Hotshot mounted to my rack with Cygolite’s bracket. You can pull it right off and stick it in your bag.

EDIT: Link

I've had the bike for a few weeks now and use it almost entirely for commuting. Here's what I've added since I got the bike:

• GoPro Hero3 Black
  
  
• NiteRider Lumina Micro 350 front and rear
  
  
• Nite Ize HandleBand
  
  
• Tektro CR720 Canti Brakes
  
  
• Ibera PakRak Bicycle Touring Carrier Plus+
  
  
• Avenir Excursion Rack-Top Bag
  
  
• SKS P45 Black Chromoplastic Longboard
  
  
• SRAM Supercork Bicycle Bar Tape (Black)
  
  
• Shimano Brake Cable and Housing Set
  
  
• Shimano Road Shift Cable and Housing Set
  
  The stock brakes weren't doing enough to stop me so I swapped them out for some Tektro CR720s. I dropped the yoke as far as I could to give myself as much leverage as possible. Braking is much better now and more reliable than the original set ever was.
  
  I added a rack and trunk bag that's big enough to hold my food and clothes for the day. The only modification I had to make here was filing away some metal from rack mounting leg. It was colliding with frame near the dropout and not allowing the leg to sit close enough to the braze on.
  
  Some of the original cable housings that came with the bike had some gouges in them so Nashbar sent me a new replacement cable set. I swapped out all the brake/shift cables and replaced the bar tape with some SRAM cork tape. The original cables from Nashbar were also a bit too long and were causing excessive friction.
  
  I added some SKS fenders per the recommendations of users on this sub. They were a little finicky to install but I got them on in the end. This particular frame doesn't have bolt holes in either of the two rear bridges so I had to resort to the classic zip tie approach.
  
  As far as the bike goes, it's been performing flawlessly so far. It weighs close to 30 lbs now so it's not the lightest thing in the world. However, the steel frame and the large tires really help smooth out the road quite a bit. The saddle is still the most uncomfortable part of the bike, but I'm hoping to swap it out sometime in the near future. Shifting is still very smooth and the 4 trim positions on the 105 front derailleur is a great feature.
  
  If you're considering getting a bike from Nashbar, I'd definitely recommend them. Their customer service was fantastic and everything they shipped usually got to me door in 2-3 days (even the bike!).

I love single speed and wouldn’t mind coasting every now and then but it’s going to be my winter bike as well and I want the feel of how much traction I’m getting.

But anyways, I have a “Topeak Super Tourist Tubular Bicycle Trunk Rack DX with Side Bar for Disc Brake Bikes” and SKS Raceblade XL fenders. I used 1/2 inch p clamps. I honestly haven’t test ridden it with the rack on there yet but I’ll report back when I do. I’ll probably carry no more than 20 pounds at once though.

Late to the party, but I wanted to throw an awesome budget option in there: http://www.amazon.com/Axiom-Journey-Cycle-Rack-Black/dp/B0025ULKGG/ref=sr_1_1?ie=UTF8&qid=1409238432&sr=8-1&keywords=axiom+journey+rack

Axiom Journey. Sure you can get one that's twice as much, but this served me well for a 3,000 mile tour through SE Asia. Highly recommended. I would take money saved on a rear rack and spend a little extra on a nicer front rack.

You need eyelets that would be located on the back of the frame. For the most part, he will be stuck riding with a backpack when riding that bike. It's possible that you could get this Ibera rack that will fit onto the seat post but you will need to raise the seat post and take off the reflector and replace that with a bike light. IMO get him a better commuter that could have a sturdier rack and carry more weight that is mounted to the frame instead of the seat post. A good beginner bike would be a Giant Escape 2 or 3
https://www.amazon.com/Ibera-Bicycle-Seatpost-mounted-Commuter-Carrier/dp/B002T5GHNI/ref=pd_sbs_468_2?_encoding=UTF8&pd_rd_i=B002T5GHNI&pd_rd_r=CVHQBP7NSBBDP1EN6BS3&pd_rd_w=O9VLc&pd_rd_wg=cWUf5&psc=1&refRID=CVHQBP7NSBBDP1EN6BS3

I was about to pull the trigger on a Kilo TT for commuting ($400 SingleSpeed), but I waited about a week instead and found a used Torelli Tipo Uno for $200 I bought instead. I too am a 6'5" so the bikes do show up, don't lose hope! I highly recommend using http://www.searchtempest.com/ so you can search your surrounding Craigslist's too (provided you have available transportation to get to nearby cities, the bike I found was 80 miles from me, but well worth the trip!).

Edit: You could maybe go for something along the lines of this CAAD8 and slap an Axiom Streamliner on that bad boy if you're not planning on carrying a TON for your commute.
If you want something more commuter'y here's another option, they do exist! :D

That said, if you do want a BikesDirect bike I have heard a lot of good things about the Motobecane Grand Record

>Is there a product or a setup that would allow me to permanently mount a milk crate or rear basket that sits on top of my rear rack AND be able to still use that rear rack as a mounting point for my removable pannier?

Sure. Get a rack with a second, lower, set of rails. There are a bunch of them. They might not all have the bar low enough to get your pannier off so use your judgement.

https://www.amazon.com/Axiom-Journey-Uni-Fit-Cycle-Black/dp/B009VU3RAU/ref=sr_1_7?s=outdoor-recreation&ie=UTF8&qid=1539937793&sr=1-7&refinements=p_89%3AAxiom

https://www.amazon.com/Topeak-bike-Super-Tourist-Side-Bars/dp/B004BU7ADK/ref=sr_1_19?s=outdoor-recreation&ie=UTF8&qid=1539937698&sr=1-19&refinements=p_89%3ATopeak

I use a Topeak rack with bag setup.

Just be careful and dont get a beach cruiser!!!!! id recommend a hybrid bike like a trek 7.1 and put a rack on it for panniers so you can carry your stuff. Also if you are over weight i highly recommend a brooks saddle i have a b17 and its wonderful on my ass. Also bike shorts 4.3 miles aint long, but it will make your life much easier. A cheap walmart bike will break often and be expensive to repair. Refer over to r/bicycling to learn more if you are strapped for cash id go with this bike its a good all rounder and bikesdirect is a good company, or a trek and the seat brooks b17 bike rack panniers shorts
Once again do not buy a bike from walmart it will make you hate bicycling. Oh also rules and sheldon brown a repository of all things cycling
Best of luck to you, safe riding and Dont buy this!!

Shaving 20 minutes off that time should be no problem, you only need to average 4 more miles and hour. Stick with it. I started commuting to work 6 miles each way about 3 weeks ago and it's awesome. Here's some stuff that'll make your ride more pleasant, if your bike doesn't already have these:

• $28 for a rack.
  
• $25 for panniers to go on the rack.
  
• Fenders to keep you drier
  
  Also, I'll vouch that cycling is possible in any weather, if you dress for it. I've gone mountain biking in December in Denver, and not just once.
  
  
  Also also - don't think of it as taking 20 more minutes, think of it as an hour workout that only takes you 20 minutes :)

That's definitely a steal. Have heard good things about these Tubus racks.

However, anyone have experience with an Ibera PakRak:

http://www.amazon.com/Ibera-Bicycle-Touring-IB-RA4-Frame-mounted/dp/B002T5H8MW/ref=sr_1_4?ie=UTF8&qid=1458744660&sr=8-4&keywords=tubus+rack

Looks like a good deal. I'm looking for a rear rack that can accept panniers.

Right now, I have this Topeak Explorer rack on my Schwinn Varsity:

http://www.amazon.com/gp/product/B000FIE3WI?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s01

My bike is a commuter but I am planning on taking it on some short weekend / week-long tours this summer, hopefully going for a month long tour at the tail end of summer.

Thanks for any insight, everyone! Cheers!

After consulting with this subreddit I went with a topeak rear rack and a wald wire basket. I secured the basket to the rack with four Nite Ize gear ties and it feels really secure.

I was looking for a cheaper option than buying all of the matching baskets and panniers that go with the topeak rear rack. I have a limited budget to spend on new bike gear each paycheck, so i'm slowly buying new items.

Today was the first ride without my backpack on my back. It was definitely an interesting feeling. I felt super light, but the back of the bike was weighed down.

Any comments or suggestions?

Thanks for the reminder. It was such a whirlwind trying to get everything in BikeIndex and Garage529 and talking to the police that I forgot to put the details here.

For the Cannondale Synapse SE 105 Disc 2019 it is unfortunately a 2 month old bike so it doesn't have too much to distinguish it from a stock new bike. The only modifications that I did were reversible accessory additions like

• Shimano SPD PD-ED500 pedals
  
• gopro handlebar mount with the Cycliq Fly12 CE twist mount
  
• 2x black bottle holders
  
• Topeak Explorer Rack Without Spring with a Cycliq Fly6 camera mount attached
  
• cell phone holder on the stem
  
• Upstand bike stand
  
  The bike rack looks a little out of place compared to the rest of it as it is actually a little beat up from wear on a previous bike. It also sports a Cambridge Bicycle store sticker. Serial number MD21685
  
  For the Marin Fairfax SC4 Belt 2018 it is a little easier. It has a bike room sticker for EF Education first. It also has the same Topeak bike rack which is beat up from a car accident. The left rear side of the rack is bent in slightly. It also has one of the water bottle holders and has the normal Cycliq Fly12CE camera mount directly attached. The belt drive is also fairly unusual so I am hoping it stands out more. It also has a sticker for Farina's in Watertown and the serial number appears to be 041716870 MRN-111-01-190.

Gear up bike rack in dark walnut : https://www.amazon.com/gearup-OakRak-Ceiling-Storage-Golden/dp/B000TM96MM/ref=sr_1_9?dchild=1&keywords=bike+stand+wood&qid=1571391795&sr=8-9
I bought it because in my previous place I couldn't drill the walls.
I saw it on reddit a 2 or 3 years ago but I can't remember in which sub/post.
If you are crafty and have access to tools, it can easily be done by yourself.
 
Found the reddit post from u/scottstedman
: https://www.reddit.com/r/malelivingspace/comments/4vth36/moved_into_a_new_place_tried_to_make_it_cozy/

I have a frame that goes between floor and ceiling, and it has the benefit of being quite aesthetically pleasing.

• GearUp Rack
  
  I bought it after lusting seeing it set up in another redditor's post on /r/AmateurRoomPorn.

Here are a few I just found on Amazon. No experience with them though..

Topeak

Racktime

Axiom

Edit: the topeak I linked is the disc version. They make a non disc as well, seems to be the same price.

If you get one of these standard racks weighs almost nothing just by itself, you can just keep it on there.

This is actually a pretty good rack that I've done a 3-day tour and a 6-day tour on with my roadie. The Seymour 45 panniers let me hold a tent, a sleeping bag, and a bunch of other various items.

Take a look at the Axiom Streamliner DLX. It's the only reasonably priced rack of its sort that i've seen. Instead of requiring eyelets, it attaches at the quick release and the brake caliper bolt, has some setback from the quick release to avoid heel strike, and is specifically designed for road bikes.

The bike you have is pretty much irrelevant these days. Brackets have been designed to allow racks on any bike whether there are built in mounts for them or not. This includes disc brake bikes.

Axiom makes a rack called the Journey. It has the lowest cost to weight carrying ratio I've ever come across. It can carry around 150lbs and costs about $40?

https://www.amazon.com/Axiom-Journey-Cycle-Rack-Black/dp/B0025ULKGG/ref=sr_1_1?ie=UTF8&qid=1504137182&sr=8-1&keywords=axiom+journey+rack

http://axiomgear.com/products/racks/journey-racks/

There are also panniers out there that can convert to backpacks. For Example.
https://www.arkel-od.com/en/bug-commuting-bag.html

I purchased a model from Blackburn, and I would not recommend it. One day it ripped off my rack, jammed into my rear wheel, and sent me flying head first into oncoming traffic. I tried contacting Blackburn about it and they never answered my calls or emails. So fuck Blackburn.

I made one: https://instagram.com/p/BYEIPVlHlxW/

I bought this Sunlite Gold Tec Front Rack, 26"/700c, Black https://www.amazon.com/dp/B002MKHR6G/ref=cm_sw_r_cp_apip_BMO8ngFtfJywW and this Vaultz Locking Personal Security Box, 7.75 x 7.25 x 10 Inches, Black (VZ00102-2) https://www.amazon.com/dp/B004Q86PNI/ref=cm_sw_r_cp_apip_wFngWCmqhqJbk and then just used some nuts and bolts (and drilled a hole) to put it all together!

its this cheap one. works OK with the Wald 137 for groceries or my backpack. Don't think I would trust it for anything very heavy

This doesn't hold much but it might work
https://www.amazon.com/Ibera-Bicycle-Seatpost-mounted-Commuter-Carrier/dp/B002T5GHNI

P-clamps are a great solution for attaching a rack when you don't have eyelets.

Here's an excellent article (with helpful photos) on how to install a rack with p-clamps: http://www.bikecommuters.com/2008/07/19/p-clamps-are-your-friends/

Here's a good breakdown and Nitto branded p-clamp from Rivendell Bikes: https://www.rivbike.com/products/nitto-band-clamps-pair?variant=23336804161

Attach at the upper eyelets and then use 2 p-clamps (one on each side) to attach the lower points of the rack. Once you have your p-clamps, then any rear rack will do depending on your needs - I use the non-disc version of this (link to the disc brake version): https://smile.amazon.com/Ibera-Bike-Rack-Frame-Mounted-Adjustable/dp/B002T5H8MW?ref_=fsclp_pl_dp_2 which is great and affordable (under $30).

It's this one. Sorry the pictures are crap, it was pitch black in the garage and I couldn't find a flashlight.

I fitted the Pacer with an Axiom Streamliner Rack.
The rack sticks a few inches out of the rear axle to compensate for the short chainstay. It didn't solve heel strike and bike shimmy but it was a bit ambitious to expect the pacer to carry a load anyway.

I use Axiom Streamliner DLX Road rack on LeMond Buenos Aires. Steel road bike.

https://www.amazon.com/gp/aw/d/B003UWESMQ/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8

You need the axle adapter in addition. Works for me.

Axiom DLX Streamliner Disc Cycle Rack, Black https://www.amazon.com/dp/B004094HY2?ref=yo_pop_ma_swf

I was able to mount this rack to my cyclocross bike which also doesn’t have any mounting eyelets on it. It worked perfect for me by putting the quick release skewer through the lower mounting points.

And then for the upper mounting points, there are two different options it comes with. Two adjustable arms for bikes that have the normal threaded eyelets on the frame behind the seat. Or a metal arm that bolts to the mounting point for normal brakes.

If you want to use the two adjustable arm option, you can buy a seat clamp that has threaded mounting points in it. Here’s that.

Axiom Trekk Seat Collar w/Rack Eyelets, 31.8mm https://www.amazon.com/dp/B0025UQ3I6?ref=yo_pop_ma_swf

Here are some photos of my bike with both the rack and the threaded seat clamp.

https://imgur.com/gallery/5NFpk8M

I put an Axiom Uni-Fit on my kona dew drop to get around the disc brake caliper. It comes with 3 different sizes of mounting brackets and is very adjustable to fit all kinds of bikes. Salsa and Axiom also both make a seatpost collar with eyelets on it if you don't have upper frame eyelets, although it's IMO a better mounting option even if you do.

I have the same exact rack and attached Cygolite HotShot series with this. It only cost $5 and fits perfectly.

I bought one of these
https://www.amazon.com/gp/product/B009YU2DU2/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1.
Works great and looks nice.

Well then you'll need a rack capable of holding panniers. I'm going to assume you're looking to go as economically as possible (I'm a Surly Nice Rack man).

You'll want something like the Ibera. Looks like Amazons got them on backorder though, maybe check eBay.

With panniers, quality costs. I use Ortliebs and Axioms. You don't want to be to cheap here. Pick what you can afford, that meets your size requirements.

I've always been a bit sketchy loading laptops and cameras into my panniers. I prefer using my Citizen messenger or VeloTransit pack for them and leave the other stuff in the panniers. Gets most of the weight off my back.

Links to accessories:

Fenders $37: https://www.amazon.com/gp/product/B00TQ43EXG/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Rack $33: https://www.amazon.com/gp/product/B00AA8GFSI/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=UTF8&psc=1

Pannier $55: https://www.amazon.com/gp/product/B07FNP4JZ4/ref=ppx_yo_dt_b_asin_title_o06_s02?ie=UTF8&psc=1

Headlight $68: https://www.amazon.com/gp/product/B01N4ANAPU/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

I got this rack off of amazon, and used some old panniers that my dad had.

As for fenders, just go to your LBS and they will set you up. I honestly don't know what kind of fenders that I have, but hey, they work.

My commute is pretty short, a little over 2 miles each way, and I have never had any issues with it.

I used to have this problem but then I put one of these on my bike.

On my large size Giant Escape 3, I have a Topeak Explorer MTX: http://www.amazon.com/Topeak-63107030-Explorer-Bike-Rack/dp/B000FIE3WI
I didn't shop around much, though, that's just what the LBS had in stock.

I did the install myself and it was pretty straightforward. The only tricky part was that you have to bend the front rails of the rack down to meet up with the seatstay mounting bolts, and make sure the rails give clearance for the "noodle" part of the rear brake.

I did backpack for a while too, and got this rack and a cheap pannier and have never looked back.

I have upgraded my pannier to something really nice, but not in scope for a commuter. 40 litre seems quite big for commuting. Might want to consider leaving the shoes at work, and the ULock, and perhaps bring in closes for several days, to cut down on weight and volume.

​

https://www.amazon.com/Explorer-Rack-Without-Spring-Black/dp/B000FIE3WI/ref=asc_df_B000FIE3WI/?tag=hyprod-20&linkCode=df0&hvadid=312070810048&hvpos=1o4&hvnetw=g&hvrand=10069077748661583872&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9029706&hvtargid=aud-801381245258:pla-381714914542&psc=1

I recently bought a Giant Escape 2 for commuting from Arlington to Downtown DC and it works great, I got the bike and lock for less than $500. If you want to look at bikes, Papillion Bicycles is the local Giant dealer and Spokes etc. is one of the local Trek and Specialized dealers. You can go and ride the bikes and see what you like, but at that price point almost all the hybrid bikes are the same.

After that I got a Topeak rear rack with this Trunk Bag and it works great, fits my computer, clothes and even lunch. It has side panniers that fold out. I would recommend that you get some cygolite front and rear lights from amazon as well.

If you're serious about commuting, something along these lines is your best bet.

[Here is my setup] (http://imgur.com/gallery/IBw0q)

Edit: Word

Most/any rack will likely be fine. I have a Topeak explorer tubular rack, it wasn't very costly and has held up well for the last four years or so I've been using it on my daily commutes.

Also my favorite upgrade was the rear rack. I stopped having the back sweat patch from backpacks.

Explorer Rack Without Spring, Black https://www.amazon.com/dp/B000FIE3WI/ref=cm_sw_r_cp_api_i_16VXCbPYK7JYQ

That's a bike rack, not a seat. Here's the amazon link:

http://www.amazon.com/Topeak-63107030-Explorer-Bike-Rack/dp/B000FIE3WI/ref=sr_1_3?ie=UTF8&qid=1346624054&sr=8-3&keywords=bike+rack

Yeah a good rack and panniers will go a long way. I picked one of these up on sale for $20 bucks, and matched it with one of the MTX bags. Super convenient for commuting, since you barely notice the weight when it's over your back wheel.

I purchased a Bike Valet and it works fine for one bike. They are only right or left oriented and work for larger tubing (my vintage steel bike don't work with it). This must be installed into a stud or concrete/brick wall to work properly.

I recently purchased a another rack in order to store two more bikes. It surprisingly works well - but not for mixtes bikes like I was hoping. It says it can hold 3 bikes, but you'd either need 10 foot ceilings and a ladder next to it always or one those must be a kids bike. The cool thing about this is that you don't have to drill into the wall.

Check etsy.com / kickstarter.com for bicycle mounts/storage - there are tons of ideas and different ways to do so for you.

I got one of these. You can put 4 bikes on them with the right configuration. No screws or bolts required and it looks clean and stylist.

Thanks man! I got it from amazon. I love it, but I probably won't put 4 very heavy bikes on it. 2 bikes should be no problem.

What I use: https://www.amazon.com/gp/product/B000TM96MM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Simple, doesn't require any wall attachment (I'm also renting - no wall rehab upon move-out), gentle on the bikes, and looks pretty cool.

I have a Blackburn EX-1 on one bike so I can use the Blackburn bicycle seat:

https://www.amazon.com/gp/product/B005ZIQMCC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I have a Topeak SuperTourist on my commuter, it's heavy but I like being able to fit my Topeak top bag with a couple of panniers when needed. I think the BadBoy 2 has mount points just above the axle.

https://www.amazon.com/gp/product/B000ZKHN6Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I used a little clamp thing to attach the two front straps to the seatpost, worked fine. They don't really hold any weight, just stability. Something like this or this.

> My only point of concern with my new bike, whose name is Rudy btw, is that it doesn't have a rack to which I can attach my bag

You can make it work. I have a road bike with no eyelets to affix a traditional rack for panniers.

I took a seatpost rack like this one - that had the small downturns. I then zip tied the V shaped sides from another rack I had lying around - just the side posts, mind. The sides were from a rack that was mostly destroyed when my wife fell with it, so the parts were lying around.

Sorry for potato: rack - with additional sides attached to seat stay - there's some rubber from an old handlebar mount light so it doesn't scratch, and its held together well.

Depending on how big your bag is, something like this might be a viable option.

If you need a rack:

http://www.amazon.com/Ventura-Universal-Bicycle-Carrier-Rack/dp/B001NGF6AY/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=3OY6HF63O6TLG&coliid=IPFXPV3JDZ7ON

And some pannier that fit that rack:

http://www.amazon.com/Avenir-Metro-Panniers-Cubic-Inch-Capacity/dp/B00165Q90I/ref=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=3OY6HF63O6TLG&coliid=ICF3KQI5Q2CTG

All that for less than $50, so it should fit a college kid's budget.

Option A that goes against N+1: Crud roadracer 2 fenders and an Axiom Streamliner rack.

Option B: N+1 Cross bike/ light tourer/ randonneur. Unless your stem is slammed on a short headtube race geometry bike you should be able to replicate your current position on a new bike relatively easily. While considering N+1 also consider disc brakes and wider tires.

Here's the Axiom rack mentioned by parent comment. It attaches at the skewer and rear brake post, so no special mounting equipment needed. I have one and have used it for two multi-day tours with no major issues. The short chainstays on racing bikes can potentially cause some interference between your heel and the front of your panniers depending on how big the panniers are and how far forward they are clipped on, but it's not that big a deal.

I use one of these on my Trek, it mounts via the brake caliper screw and the rear wheel's skewer, so it will work on any road bike, and can actually support a good deal of weight.

I think I have that rack, this is my rack

Axiom DLX Streamliner Road Cycle Rack, Black https://www.amazon.com/dp/B0025UCXEO/ref=cm_sw_r_cp_api_YJOrybPKAG2WZ

I have it on my carbon road bike. With a stopwatch it took me five minutes to take on or off, and so when I ride with other people I take it off so they don't give me funny looks :)

The seat clamp is a good option. Another choice is a rack that attaches to the caliper mount, like the Axiom Streamliner, but I'm not sure if that will interfere with your brakes or not.

LHT Frame - $520 after tax

Chukker Wheels - $85 x 2

Tires Schwalbe Marathon Plus RLX 700 x 45 C Bicycle Tire - $54 x 2

Alloy Headset Spacers - $7.89 x 2

Shift Levers - $60

Chain - $10

Brake Cables - $10

Brakes - $15 x 2

Extra Long Shift Cables - $6

Derailleur - $24

Cassette - $17

Crankset - $40

Spindle - $24

Headset - $45

Seatpost - $20

Brooks Saddle - $145

Rack - $35

Brooks Panniers - $150 x 2

Brooks Bar Tape - $65

Tools

Saw Guide - $41.36

Starnut Setter - $22

Don't have any experience with that rack, but I did just install this on my bike and I'd recommend it:

https://www.amazon.com/gp/product/B0025ULKGG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I am a big fan of hybrids for the type of riding you describe. They can also handle mild unpaved surfaces. Test ride the Specialized Sirrus, Giant Escape, Cannondale Quick, and Fuji Absolute. Those 4 all price closely at each spec level. There are many other brands with models in that class too depending on the bike shops near you (Marin, Jamis, Kona, Felt, Scott). Shop convenience and service quality should be factors in your decision.

I'd recommend getting at least an 8 speed in the rear. It's easy to upgrade later and has smaller jumps between gears. Rim vs. disc brakes are up to you. If you don't plan on riding in foul weather, rim brakes are good enough and give you a very convenient front rack option.

Sunlite Gold Tec. Mounts right to the canti bosses on your fork, as well as the fork crown. Solid little rack for cheap.

Well, I use my standard entry level road bike for pretty much everything. It's a 2015 Felt F95 Sora which has been treating me really well. I have around 7,000 Km on it.




For touring, especially for carrying stuff, I wanted something sturdy and cheap so I went with this rack and this easy clip-in bag. The bag is really great as it can easily come off the rack and double as a shoulder carry bag. There's another small saddle bag (Standard) for tools and spares. Additionally, I had 10L cycling backpack (Not in the picture). If you have any other questions, ask away.

Edit: Grammar

Yes, but good luck with that - this bike doesn't even have eyelets at the dropouts or a drilled brake bridge, much less proper mounting points on the seatstays. Where there's a will, there's a way, but your best bet will probably be something mounted to the seat post (like this), which is only a decent solution.

If you haven't yet bought this bike, I might recommend you choose a different one better-suited to mount a rack, and maybe with multiple gears, which I know are super uncool, but which are also super useful when you need to get a heavy load up a steep hill. If you've already bought it, I'm sure you'll be able to make it work well for you.

totally hear you on not wanting to bolt anything to your road bike, but i commuted 20 miles a day with one of these and some bungee cords for like 3 years. so much better than a backpack.

> And really its been a long time since I've had one of those holy shit I actually reaaaallly enjoy this moments

riding is pretty zen for me as well. haven't had time to do long rides lately and definitely miss it.

I know zero about riding in the snow but will say that in general you can commute on any bike and its best to just start riding. The knobby tires certainly shouldn't hurt in the snow.

Rear racks are a bit tricky for mountain bikes and there are not a whole lot of good options. One option is the style that mounts on the seat post (see link below). In my opinion they are heavy, kind of clunky and I have never seen one that isn't loose and flopping around, however, some folks seem to like them. Depending on what you want to carry you may want to look into a frame bag or a seat bag.

https://www.amazon.com/Ibera-Bicycle-Seatpost-mounted-Commuter-Carrier/dp/B002T5GHNI/ref=sr_1_10?dchild=1&gclid=EAIaIQobChMImNiR7dG75QIVBNvACh1Uwww6EAAYASAAEgL2IPD_BwE&hvadid=198228759260&hvdev=c&hvlocphy=9032294&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=6150622066045943072&hvtargid=kwd-324685841740&hydadcr=2429_9914336&keywords=rear+rack+for+mountain+bike&qid=1572151840&sr=8-10

FWIW I used these every day all last summer without issue: https://smile.amazon.com/Ibera-Bicycle-Clip-on-Quick-Release-Panniers/dp/B009LNOXF0/ref=pd_sim_468_12?_encoding=UTF8&pd_rd_i=B009LNOXF0&pd_rd_r=HMXDHHDFM28KD6DMQ0RP&pd_rd_w=h5S82&pd_rd_wg=NeSH1&psc=1&refRID=HMXDHHDFM28KD6DMQ0RP

This rack: https://smile.amazon.com/Ibera-Bicycle-IB-RA4-Non-Disc-Frame-Mounted/dp/B002T5H8MW/ref=pd_bxgy_468_img_2?_encoding=UTF8&pd_rd_i=B002T5H8MW&pd_rd_r=AS4WPBTSD6MSHYPGNT6G&pd_rd_w=Tukkq&pd_rd_wg=wvdFy&psc=1&refRID=AS4WPBTSD6MSHYPGNT6G

$120ish all in, but worth it.

I put an Ibera Rack on my BikesDirect CX Bike without issues. I used the one for disk brakes. It can be installed at different angles, and I've never had a rattle or a squeak from it. I liked the way the Ibera looked, and it works well with its companion bags.

I only have the one bag, so the bike was unbalanced at a stand-still, but I really liked it. It has a shower-cap bag stowed in a bottom pocket for when it rains. I managed to put two 2-liters and my personal and work laptops in the one bag once. It was tight, but fit.

The TOPEAK bags and racks are much more popular, for sure.

If you have serious trouble with the screws squeaking, you can use split-washers to hold tension on them.

Chiming in with my 2 cents on racks and bags based on my personal experience. YMWV.

I didn't like the idea of a permanent rack bolted to my frame rattling over every bump + I knew I wasn't running any 25 pound + loads, so while I did get one of those Topeak racks with the clip system, I ended up with a long flat soda carrier like the one in bottom right in this pic . Add a bungee cargo net and it's great for groceries. I ended up rigging up a dedicated quick release + post + seat rig, it's just easier to swap out the whole thing that to try and mount the rack to the post and tighten it down so it doesn't move.

For my 'runaround bike' I went with a cheap ass schwinn 10 bux at the river in africa place and this 12 buck bag with velcro straps.

Not the sexiest rig but it works and when I lock it out on the street I can pull the bag off and with carry handle OR shoulder strap, carry it inside. The main compartment is big enough for a quickstop at the store for a 6 pack or the usual 3-4 other items. It's not for the major runs but for the 'gotta stop and get a couple pounds of hamburger + buns and some catsup. Add the backpack for when you are stocking up.

The sides and top have enough substance that your chow won't melt in the time it takes to get home and it has a water bottle holder in back and 3 side pockets good for a spare tube + tools pump or CO2 inflator , cell phone etc.

My other (cheap but decent quality) safety stuff suggestions like lights and such is here

and for 5 bucks + a 9v batt, add an alarm just to discourage thieves in publiv - many of them will steal your shit right in front of people but when an alarm goes off , it takes ballsy thief to hang in there and keep hacking - at least in a public bike lockup

I use this cable for front wheel + seat when locking out on the street for more than 5 minutes

If you have QR front wheel and intend to pull it off so you can use your U lock and want a longer -wider U lock, I have found this to work well , I also have an older X4 Onguard and if I have to lock up somewhere and be gone for hours I will double U lock the frame and rear wheel and then Cable up the seat and front wheel and turn on the alarm.

There is always bigger, better, stronger, and faster (and more expensive). For a $300 - $500 bike, I have found this gear to function and it's a price/performance point that seems to make sense to me.

Buy a rack made for road bikes without rack mounts. The best cheap one is this: https://www.amazon.com/Axiom-Streamliner-Road-DLX-Racks/dp/B003UWESMQ

The best expensive one is the Tubus Fly Classic plus the Tubus QR mount kit. It will cost 3-4 times as much as the Axiom.

I spent some time in google maps and and street view. For your Route Would going down Glenoaks Blvd to Sonora Ave then down Riverside Ave work for you? it ends up being 4.8 miles but with that route it's a bike lane until Riverside Dr and Bob Hope to your destination, so almost the whole trip would be by bike lane https://goo.gl/maps/oNfXYXZt9HS2. If you're comfortable walking you could walk the bike on the sidewalk for the last section of it and cool off. so you aren't riding "in traffic" until you're more comfortable with it.

For a pannier rack without a rack mount you can try something that attaches to your seat post if the load won't be too heavy like this https://www.amazon.com/Blackburn-Interlock-Seatpost-Rack-Black/dp/B00GCB6EEW/ref=sr_1_41?s=sporting-goods&ie=UTF8&qid=1550901567&sr=1-41&keywords=seat+post+pannier+rack as long as it has something going down on the sides to keep panniers swinging into your back wheel as you ride. I've never used one like this so I don't have any first had advice on how well it keeps the bags from swinging into the rear wheel

Or you can try something like this https://www.amazon.com/Axiom-Streamliner-Road-DLX-Racks/dp/B003UWESMQ the bottom mounting holes go where your rear wheel axles are, the quick release skewer goes through the rack mounting holes and through the wheel. The silver looking tongue in the front goes between the rear brakes and the frame using the bolt for the brake calipers to hold it in place. It'll keep the bags stable, hold more weight than a seat post rack, and sit a little further back so your heels don't hit the panniers. I have this rack on an old road bike I use for my commute to work and I love it

​

Hope you have a great time with your commute and stay safe

Get an Axiom Streamliner Disc. Thats the answer.

Axiom DLX Streamliner Disc Cycle Rack, Black

The other replies are right about the lack of mounting holes on the top of the seatstays, and their solutions. Another alternative is that some racks mount onto the centre brake caliper bolt like this one.

I’ve had no issues with my Axiom Streamliner disc over a couple hundred km now. Also the thinnest rack I could find at the time.

https://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2

Axiom DLX Disc Rack fits most bikes. Not extra-wide.

Link: http://amzn.com/B004094HY2

I have the Axiom Mk 3 Alu Journey Uni-Fit, it only comes in black (but a little matte grey spray paint could fix that). I have it on a 26in MTB bike, and it took a few times of moving the rear wheel attachment to get it to be perfectly flat, but I've had no problems since. Also - you'll likely need a collar for your seat post that allows the rack to attach to it, like this. I'm not sure what you are envisioning from a design perspective, but it strikes me as relatively mundane.

Axiom Journey Uni-Fit

https://www.amazon.com/CygoLite-Rack-Mount-for-Hotshot/dp/B009VUB0Q8/ref=pd_lpo_vtph_468_lp_t_2?_encoding=UTF8&psc=1&refRID=VDMRWF7G62WXE9P91J9N

Does that light work with the Cateye rack mount?

If not, I use a Cygolite Hotshot with the Cygolite rack mount which works really well. The Cygolite is great bang for your buck.

Cygolite makes an adapter you attach on your rack and the light clips right onto it. I bought one last week, it works great. I got mine off Amazon. https://www.amazon.com/gp/product/B009VUB0Q8

Link if interested: https://www.amazon.com/gearup-OakRak-Ceiling-Storage-Walnut/dp/B009YU2DU2/ref=sr_1_1?ie=UTF8&qid=1480893235&sr=8-1&keywords=gear+up+bike+rack

I’m in the US but I have this and it looks very similar: Ibera rack

its a toshiba laptop backpack bag i got from newegg few months ago when it was on sale -

https://www.newegg.ca/Product/Product.aspx?Item=N82E16834976649

and here is the rear rack i am using (RA-5 for disc brake, RA-4 for vbrake) -

https://www.amazon.com/Ibera-Bike-Rack-Frame-Mounted-Adjustable/dp/B00AA8GFSI

https://www.amazon.com/gp/product/B00AA8GFSI/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Worked on a Sondors with 4.9" fatties.

I have a Ibera 2 in 1 PakRak.

https://www.amazon.com/Ibera-Commuter-Expandable-Panniers-Detachable/dp/B00EOB89JA/ref=mp_s_a_1_6?keywords=ibera+bike+bag&qid=1558195185&s=gateway&sprefix=Ibera&sr=8-6

It clips on the Ibera rack, so very easy to remove and install.

https://www.amazon.com/Ibera-Bike-Rack-Frame-Mounted-Adjustable/dp/B00DWKUAZK/ref=mp_s_a_1_16?keywords=ibera+bike+bag&qid=1558195339&s=gateway&sprefix=Ibera&sr=8-16

Hard to say but looks like the seatpost is aluminum. In either case, carbon is very strong and would be able to handle a seatpost rack. Those racks are pretty good but just have a lower weight limit because adding items to those rack create a torque sorta like a cantilever beam. There are ones that clamp on the seatpost but also have connections to the seatstays which allows you to have a higher weight limit.

West Biking Universal Adjustable Equipment Stand Footstock Bicycle Carrier Rack with Reflective Logo, 110 lb Capacity, Black https://www.amazon.com/dp/B0154OMGIK/ref=cm_sw_r_cp_apa_qaLzzbK4JCAF6 one like this.

what up - check this thing out, it would be pretty much exactly what you need, and it would totally hold a milk crate (even though cheap panniers beat milk crate 10/10); https://www.amazon.com/dp/B01AUY2OWW/ref=wl_it_dp_o_pd_nS_img?_encoding=UTF8&colid=1YDUCHVSJ2MEV&coliid=IW5GT4VKSC3B9

And if you get a milk crate - get one from lowes or home depot for like $8 as they will be way more rugged than anything you get at wally world or target. There's always stories floating around about people getting busted with 'stolen' crates they snagged from behind a grocery store, so dont do that

You should do it!

And the rack is a Thule Pack'n Pedal Tour Rack.

Thule pack and pedal tour rack https://www.amazon.com/gp/aw/d/B01N6RORTM/ref=dp_ob_neva_mobile

Yeah sorry I forgot about your no brazon / p-clamp requirement.

They have a lot of options. I chose the Explorer rack which was much lighter than my other two rear racks.

I am considering buying one of their Beamracks for my road bike without the side frame add-on so I can use my bag for weekend rides as well.

Some other things I considered were not as functional, were more expensive, but looked much better. They don't exactly match your requirements, but maybe they'll give you some ideas.

• Carradice Camper with the Bagman Expedition Support which meets your requirements, except for price.
  
• Sackville Saddlesacks
  
• Minnehaha Saddle Bag
  
  The one I had before the Topeak one was a Racktime Wall-it with a Snapit rack. I really like it, but I just needed to carry more stuff. The Snapit system is nice and works with the Ortlieb trunk bag as well. I got it really cheap on Sierra Trading post. You can even buy the Snapit adapter by itself to make the system work with any bag you like.
  
  Hope you find something that works well for you.

They're super common, and shouldn't be a big deal to find. If you do have trouble, there's always amazon.

I've got the Topeak MTX Explorer - Note if you have disc brakes get this one instead

and Topeak MTX EXP with zip down panniers

The bag slides into the track on top of the rack and snaps in place. Panniers fold up into the sides of the bag when not in use. Total cost for both, about $130.

On my old steel touring bike that came with racks I use Swiss army bread bags as panniers. They look nice, and are cheap!

There's a couple of options to mount the rear rack clamps that clamp on to the seat stays Portland Design Works Payload and Loading Dock Rack Hardware Pack https://www.amazon.com/dp/B00A91JIJE/ref=cm_sw_r_cp_apa_M2HjzbYR6HWSQ
Or a seat post adapter Sunlite Bicycle Rack Seat Clamp, 34.9mm, Black https://www.amazon.com/dp/B0014GI9RK/ref=cm_sw_r_cp_apa_s9HjzbFRCPMTC

As far as which one to buy there's a bunch of decent ones in that range I've used this one on a bike for years with one problem Topeak Explorer Bike Rack https://www.amazon.com/dp/B000FIE3WI/ref=cm_sw_r_cp_apa_9-HjzbZFWZTYE

Axiom also makes done good ones in that price range.

what should you know about saddle bags? Buy a topeak MTX quicktrack rack and the expandable EXP bag This system is too amazing to describe. Small bag for short trips, unfolds into full pannier setup. Securely fastening it to your bike in under 10 seconds is a dream compared to conventional veclro/bungee systems. Both of these together will be over your $80 budget for your helmet/lock/bag but it's well worth it. I'll never use another bag/rack again. The rack is also lighter than the cheaper rack I was using before.

Explorer Rack Without Spring, Black https://www.amazon.com/dp/B000FIE3WI?ref=ppx_pop_mob_ap_share

That’s the rack that you have to order separately

I have this Topeak rack on my commuter bike: http://www.amazon.com/Topeak-63107030-Explorer-Bike-Rack/dp/B000FIE3WI

I particularly like this Topeak trunk bag that you can easily slide on and off the rack:
http://www.amazon.com/MTX-Trunk-rigid-molded-panels/dp/B000ZKHN50

I commute daily with a Topeak Rack + Trunk Bag. I fit my clothes, lunch, and 15" Macbook. Trunk bag slides off and has shoulder strap to carry it around.

$120 for both is well worth it. Skip the beers for a couple weekends and get one

http://www.amazon.com/gp/product/B000FIE3WI/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000FIE3WI&linkCode=as2&tag=dealstoponlin-20&linkId=2JAH4AZ7ZJYSADXV

http://www.amazon.com/gp/product/B000ZKES0S/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000ZKES0S&linkCode=as2&tag=dealstoponlin-20&linkId=E5J7UOMYPKLW7FO6

Rack is Topeak Explorer and the bike has eyelets for the rack to mount on

Depending on what you're travelling with, you could look into a bike rack and detachable bag.

I use this rack and this bag.

I have one of these - they can hold two bikes and look great. They work with tension between the floor and ceiling so you don’t need to drill holes:

gearup OakRak Floor to Ceiling Storage Rack, Golden Pecan https://www.amazon.com/dp/B000TM96MM/ref=cm_sw_r_cp_api_i_mSxMDbNDDBT4H

It's this one here we had to slightly modify it because of our height. But we are very happy with it! My parents got it for us over the holidays.

I use a Topeak Super Tourist DX and couldn't be happier.

Late to the party, but if you're looking for a reasonably priced rear rack, I'd recommend the Topeak Super Tourist rack; the DX version is made for disc brakes.

It has side bars that let you mount your panniers low and farther back (which helps avoid heel strike) and lets you use a trunk bag simultaneously. It also has Topeak's MTX system, which lets you use their excellent MTX bags (super-fast, secure and convenient attachment and removal).

Note that it's made of aluminum (as opposed to steel), so it may not be the choice for multi-month tours with super-heavy loads. That said, I've used mine for four years on several weeklong tours and regular commutes to work, and it has handled everything I've thrown on it with no problems.

This rack worked with child seats for me:
https://www.amazon.com/Topeak-Super-Tourist-Tubular-Bicycle/dp/B000ZKHN6Y/ref=sr_1_4?keywords=topeak+rear+rack&qid=1568775315&sr=8-4

I am not, and didn't realize that I should. I know that it seemed a little floppy, but I was trusting in the hitch. I do have some straps, so I think now I will add a strap to the trunk. Thanks.

My bikes are hybrid with no fenders, but I do have one of these bike trunk racks. I didn't think about how those arms might need a clear tire. Thanks for that as well.

http://www.amazon.com/gp/product/B000ZKHN6Y/

Used this for everything from touring to grocery trips, been great so far. Definitely recommended. Also look into Old Man Mountain racks if you'd like some more options.

A bicycle carrier rack would make my morning commute to school a lot easier.

Thanks!

This rack will work. Best $30 bucks you'll spend:

http://www.amazon.com/Axiom-Streamliner-Road-Cycle-Black/dp/B0025UCXEO

I use this on my old carbon roadie. I think it can attach multiple ways (including to brake mount).
https://www.amazon.com/Axiom-Streamliner-Road-Cycle-Black/dp/B0025UCXEO/ref=mp_s_a_1_2?keywords=bike+racks+lx&qid=1559236935&s=gateway&sr=8-2

They come with the rack.

Well there is the new Rawland rack that attaches to brazeons not Canti studs.

There is the cheap Sunlite rack in black

Everything else I know of is bigger and or mounts to the fork dropouts. Simworks, Pass&Stow, HaulinColin all come in black.

Sunlite makes a front rack that fits a six pack well. Throw a bungee over the pack and you're good to go.

You could also buy a growler cage if you buy your beer in bulk

You can always get a front rack and then attach whatever size basket you want. There are a ton of smaller sized metal baskets that you would use in a kitchen, for instance, that could be useful.

If you have v brake mounts, this rack https://www.amazon.com/Sunlite-Gold-Front-Rack-Black/dp/B002MKHR6G/ref=pd_bxgy_468_2?_encoding=UTF8&pd_rd_i=B002MKHR6G&pd_rd_r=220633cb-e138-11e8-9996-bd5c2b1c099d&pd_rd_w=zU6Sk&pd_rd_wg=5tfTR&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=6725dbd6-9917-451d-beba-16af7874e407&pf_rd_r=N2MR0EK7WNKM1RS7KVVA&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=N2MR0EK7WNKM1RS7KVVA is surprisingly inexpensive and strong.

I use the linked rack with a wald basket zip-tied to it on one of my bikes and haven't had a problem, even with some considerably weight loads. Imgur

There's this. I put it on my budget beater shopping bike because I wanted something to securely zip tie that shallow plastic crate to. It was working well but as I got more daring with loading up the front, the tab attaching it to the fork crown eventually broke so I replaced it with a piece of cheap flat steel that I bent into shape and drilled a couple holes to fit. Realizing the amount of weight I wanted to carry was going to be too much for those 3 anchor points, I decided to rig up some Wald basket struts between the front axle to the front of that small rack. Now I'm able to haul upwards of 20 lbs up front. I realize I could have simply ordered a Wald front basket but I prefer the shallow edges, look and fit of that plastic crate. The shallow Wald "pizza delivery" style rack sits too high up and is anchored to the handlebars. This puts my load lower over the wheel and gives me room to stack taller items without blocking my view.

Probably the cheapest end of the spectrum as far as cheap-but-still-functional front racks go:

SunLite Gold Tec

Anecdotes and mods aplenty here.

is there a specific keyword i should be using? or do i just have to find a lighter basket that just clamps to the handlebars?

i am trying to find a front basket that is at least 12x9.5 wide, but they all mount like the one above

i found this

https://www.amazon.com/gp/product/B002MKHR6G/ref=ox_sc_act_title_1?smid=A15MD58ELY2BCA&psc=1

could i use that plus the basket, just having the basket clamped to the handlebars and "resting" on the rack?

i am not planning on putting a lot of weight there, just food/grocery type stuff

Zip tied to this awesome little rack right here:

http://amzn.com/B002MKHR6G

Does it have eyelets though?

edit: if it doesn't, you could try something like this

These are great suggestions.

I did find a nice rear rack that attaches to the seatpost and a flatbed trailer I really liked.

It's funny, my main reason for going rigid on the forks was to save weight, but here I am adding significant weight.

I think it I will likely try a different, more comfortable saddle, fenders, tires, and I may go with some sort of handlebar set up that gives me a better angle when riding. Long rides on the bike as it is now tend to make my lower back stiff/sore.

Seatpost racks can't handle a lot of weight, but the quick release function might be appealing:. E.g.: https://www.amazon.com/Ibera-Bicycle-Seatpost-mounted-Commuter-Carrier/dp/B002T5GHNI

I was really wanting this one because it looks incredibly sturdy, but I don't have the necessary threaded holes near the seatpost.

https://www.amazon.com/dp/B002T5H8MW/ref=cm_sw_r_udp_awd_3QV4tb1CZT06B

If you're going to be commuting you should look at getting fenders (SKS are good) and a rear rack and pannier bag (you're better off letting the bike carry your stuff; you won't get a sweaty back from a backpack). I'd also probably recommend a chainguard (which lets you ride in jeans/regular trousers without worrying about ripping the shit out of the cuffs).

This one. I did have to order a seat post clamp that has the mounting holes.

Ok, I assume you have a very, very low budget so here are some options for you:

• Find someones couch to crash on for now. Preferably someone with an internet connection
  
• Build some Kitty Litter Panniers for now or a back pack (you will regret only having a back pack) ($15-$30) - see if you can make 4 of them provided you can take a front rack. Two if you can not.
  
• Get a camping hammock with a rain fly or a bivy tent (I have no ideas if either of those are good, I'm just going cheap) ($50-90)
  
• Get a sleeping pad ($30)
  
• Get two racks if your bike can take them. One for the front and one for the back ($60)
  
• Get a small tarp (I am sure you can find better than this, perhaps even locally) for those days with REALLY bad weather. ($7)
  
• Get a pancho or other cheap rain gear ($15)
  
• Get some bungee cords ($5)
  
• Get camping pans ($15)
  
• Get a lighter ($0.50)
  
• You could build a camping stove but I can't vouch for how well these work. You might want a proper one ($5-$50)
  
• Get a pump (follow the recommendations others have made) $20-$50
  
• Get a tool kit and some spare parts (I really like the Survival Gear Box) $50-75
  
  So maybe $275-375 total cost before food and water? Man, that's still high...

You have three options:

• shim the attachment point out until the support does not interfere
  
• bend the support until it does not interfere
  
• get a rack with narrower tubular supports. It looks like all Topeak racks use those same flat supports, but I have an Ibera with tubular supports similar to this: https://www.amazon.com/Ibera-Bicycle-IB-RA4-Non-Disc-Frame-Mounted/dp/B002T5H8MW/

Lol, thats the exact trailer that I have. I saw a rack on Amazon that looks like it's going to work. I guess I shouldnt really worry about bags till I have a decent rack. What do you think about this one? It's going on a mountain bike http://www.amazon.com/Ibera-Bicycle-Touring-IB-RA4-Frame-mounted/dp/B002T5H8MW/ref=pd_sbs_sg_2?ie=UTF8&refRID=15ERRXQWVPB797C5PFR2

It looks like there are eyelets for rack mounts so any rack like this should work https://www.amazon.com/gp/product/B002T5H8MW/ref=s9_top_hd_bw_bEHOX_g468_i2?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-3&pf_rd_r=ZWM7T83HJTAQ5WKKA7WP&pf_rd_t=101&pf_rd_p=4fa95ac1-9313-504c-a40b-72e9b9823f04&pf_rd_i=3403461

Panniers are can be a bit more 'sized'. Are your boots high tops? I'm thinking something like this https://www.amazon.com/gp/product/B00ET9W146/ref=abs_brd_tag_dp?smid=ATVPDKIKX0DER

Full disclosure I have a Blackburn rear rack and some large drawstring top Jaand panniers I found used.

seatpost rack, $14

https://www.amazon.com/Schwinn-SW75617-2-Alloy-Rear-Rack/dp/B0030RS5CA%3FSubscriptionId%3DAKIAILSHYYTFIVPWUY6Q%26tag%3Dduckduckgo-d-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB0030RS5CA

You like her rack? ;)

It's sort of like this one. It worked sorta, though I wouldn't reccomend it because loaded panniers will hang down and rub on your tire. And it will swivel around the post (A bolt through it will prevent that though)

As far as a weight capacity I have no idea. It held my ~25lbs of gear fine but I surely wouldn't sit on it.

I heard from several people that hammock camping is the way to go, but haven't tried it yet.

The rack is an axiom streamliner road rack, it's very narrow so it wouldn't be suitable for carrying anything on top but is fine for mounting the panniers on the side. The front mounts on to the bolt that holds the calipers in place and the rear is set back a couple of inches from the axle with a steel plate to give better heel clearance.

It is strong enough for commuting with a moderate load but If I would go for something with a more sturdy design if I was planning on carrying heavy loads.

It's a great feature (although you don't mount the panniers at an angle, the upper rail is always parallel to the ground, but it does solve the heel clearance issue). I've seen a few other panniers that allow a similar sort of adjustment. For example, these (if you're in Canada). The alternative is to get a rack that has a setback like these axiom's. They let you mount the pannier's further back and away from swinging heels.

Having said that, my wife is really happy with her ortlieb city rollers and the adjustability fixed a problem with her last set.

Something like this:
http://www.amazon.com/Wald-Folding-Rear-Mounted-Basket/dp/B0073TQIOS

plus this:
http://www.amazon.com/Axiom-Streamliner-Road-DLX-Racks/dp/B003UWESMQ

That's assuming your backpack will fit inside that basket.

No way 700c would fit.

I replaced the pads in the back and it's all good now, will do the front later so brakes are taken care of. I will probably get a SS chainring 48+ teeth for the front. Cleaned up the derailleur and its much better now, but I still gotta get it tuned by a shop (shifts great but skips 5 and 8)

Also, since my rear rack is taped on right now I was looking at getting this. From reviews a fender should fit underneath it. I've got the hole between the seat stays to mount a fender, but do you know of one that fits on disc brakes?

I haven't been able to find a rigid fork that has the correct axle to crown length, from what I've researched mine is 480mm and would shoot for a ~450mm fork. Would I need to get a 700c wheel and smaller fork to offset it? After that I'd look into a different handlebar or better bar ends, as the ones on it are 10 pounds and from a huffy.

Thanks for the help all, looks like I can salvage this.


This is my bike on bikepedia

http://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1463772823&sr=1-1&keywords=Axiom+rack

It's an Axiom Streamliner for Disc brakes http://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2

Axiom Disc Rack mounted to a seat clamp with eyelets would fix the lack of eyelets and seat stay mounting points problem for a rack. About to do this on my brother's Fuji Roubaix.

Axiom DLX Streamliner Disc Cycle Rack

https://www.amazon.com/dp/B004094HY2/ref=cm\_sw\_em\_r\_mt\_dp\_U\_vJW0CbMTNBN21

​

Installed super easily. I'm only using it for fairly light loads. 15in laptop and a change of clothes (no shoes). If I was really going to load it up I'd probably change the top mount to one that clamps the seatpost.

I HATE seatpost racks. The problem is with only 1 attachment point, they tend to swing around behind you a little. They also don't carry much.

They do make racks for bikes without rack mounts though.

A cheaper one is the Axiom Streamliner Disc:
http://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2/

A lighter but more expensive one (that is designed to be a rack solution on full carbon bikes as well as others) is the BONTRAGER BACKRACK LIGHTWEIGHT:
http://www.trekbikes.com/us/en_US/equipment/cycling-accessories/bike-racks/bontrager-backrack-lightweight/p/08214

They both work the same way - at the top they attach under the rear brake bridge. At the bottom they attach via the wheel skewer, putting the weight of anything on the rack right onto the wheel axel (same place your bodyweight goes).

P.S. I see someone else said something similar and mentioned some of these racks below as well.

Werd, pretty much any rack will work if the brake is inside rear triangle.
If brake is mounted on back of the dropout, you need a disc specific rack.
There are two main types: the kind that is just spaced much wider, like this:
http://www.topeak.com/products/racks/explorertubularrack_discmount
And the kind that is set back further, like this:
http://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2
The set back kind gives you more heel clearance for panniers. But also mounts weight further back... tradeoffs.

Justhavingacoffe, I'd be super interested how you have made the Topeak work.


DuranDourand, thanks for the pic, that's exactly the problem I ran into.

Just to double check, this is the rack you've used, correct?

http://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2

Thank you?

Take a look at this one. One of the things to look out for on road bikes without eyelets is that heel clearance is also shorter. This track mounts to the quick release and brake mount, plus moves the track back to provide more heel clearance when you’re panniers are on. They have a road version that just has a narrower platform on top but the dish version tends to get better reviews and has a normal sized platform for a crate, etc.

https://www.amazon.com/Axiom-Streamliner-Disc-Cycle-Black/dp/B004094HY2/ref=mp_s_a_1_3?dchild=1&keywords=axiom+streamliner+disc+dlx+rear+rack&psc=1&qid=1572324935&sprefix=axiom+stre&sr=8-3

I have this http://www.axiomgear.com/products/gear/racks/streamliner-series/streamliner-disc-dlx/

I carry so much weight I do wheelies if I'm not sitting on it. Rated for 110lbs

$33.56 on amazon
http://www.amazon.com/gp/aw/d/B004094HY2/ref=s9_simh_gw_d0_g468_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=mobile-1&pf_rd_r=0NZMQHGAACEBC23H7MC6&pf_rd_t=101&pf_rd_p=1634797062&pf_rd_i=507846#

I use on a 26" MTB without disc. Plenty of clearance for fenders

Check out the Axiom MK Journey Uni-fit rack: https://www.amazon.com/Axiom-Journey-Uni-Fit-Cycle-Black/dp/B009VU3RAU/ref=sr_1_1?s=sporting-goods&ie=UTF8&qid=1468615278&sr=1-1&keywords=axiom+mk+journey+uni-fit+cycle+rear+rack

I've used it on a couple of CX bikes with a short chainstay, and it puts the bags well aft of my heel, no issues at all.

I've done some touring on my mostly stock setup. I had problems getting front panniers mounted with the stock brakes, so I switched to low profile cantis. It's been mentioned that heel strike will be an issue; I recommend a rack that is offset from the hub like the Axiom Mk Journey. Otherwise it does fine, a triple up front would be nice sometimes but I haven't needed it enough to upgrade.

https://www.amazon.com/gp/aw/d/B009VU3RAU/ref=ya_aw_od_pi?ie=UTF8&psc=1

I use the axiom MK journey. This rack attaches to my rear brake mount and my rear axle.

Fenders: these or these

Rack: Axiom Transit

Lights: Front and tail. If you want a rack-mounted tail light: light and bracket.

Helmet: go to your LBS and try on a few. One-size-fits-all helmets are not as comfortable.

Other: I'd also recommend a puncture kit for when the inevitable happens. Tube, tire levers, CO2 inflator and cartridge.

We've had one of these for 4+ years. Looks great and is very sturdy. Can even hold up to 4 bikes with additional attachments if you get more bikes. Bonus that you don't need to put any holes in the wall or ceiling.

How about a floor to ceiling bike rack instead? Here is one example:

http://amzn.com/B009YU2DU2

This is what I have:

Ibera Bike Rack - Bicycle Touring Carrier Plus+ for Disc Brake Mount, Frame-Mounted for Heavier Top & Side Loads, Height Adjustable for 26"-29" Frames https://www.amazon.com/dp/B00AA8GFSI/ref=cm_sw_r_cp_api_i_rwimDb3J8XHMJ

I just got an Ibera rack and put on my new Radrover this week and had no issues. I used 3-in-1 oil for all the bolts since it said to lube them all. You also need an extension cable to wire up the brake light which I didn't think about at first. I found the cable on Amazon and you need the 600mm blue 4 pin connector. Confirmed the pin and cable type on the Bolton eBikes website along with reviews for the cable on Amazon using it for the same thing. Looks lovely ke the cable ships from China so takes a while for delivery.

This rack supports 55 pounds which was the only requirement I had since I needed it for the Hamax Caress child seat. I searched all over and read through all sorts of forums and didn't find any options for a front rack so I just ordered the front rack straight from Rad Power Bikes themselves.

Ibera Bike Rack - Bicycle Touring Carrier Plus+ for Disc Brake Mounts

BAFANG Extension Cable with the 4 Pin Plug

I have a 26" Specialized mountain bike which I commute on, This is the Rack I purchased and is fantastic for its price.

https://smile.amazon.com/gp/product/B00AA8GFSI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

These are the panniers I purchased:

https://smile.amazon.com/BV-Panniers-Capacity-Detachable-Shoulder/dp/B01EVJBY3C/ref=sr_1_1?ie=UTF8&qid=1522038423&sr=8-1&keywords=bv+panniers&dpID=51MTm7TcjQL&preST=_SY300_QL70_&dpSrc=srch

I actually got them on Ebay brand new for about $30. If you search ebay you could find a similar or close deal.

So you can get a setup for about half your budget.

Ouch, that must have put quite the damper on Christmas.

It sucks that locks are so heavy. If you primarily ride it to one place, maybe you can leave the lock there?

Here's the rack I've been using. I like that their bags have an easy clip system. Rad Rovers old rack looks nice if their options are taken advantage of. Hopefully their 2019 rack is the same or better.

If looks like the Rad Rover has the same controller and motor that's on my bike, which means if you ever need a new battery, you might as well convert it to a 52V system, which should increase output and top speed. Other than the battery, I think the only other thing you might need is a new dash.

Like this: https://www.amazon.com/Ibera-Bicycle-Touring-Frame-Mounted-Adjustable/dp/B00DWKUAZK/ref=pd_sbs_468_1?_encoding=UTF8&pd_rd_i=B00DWKUAZK&pd_rd_r=W5QJTYPPC8W58TBPKGT1&pd_rd_w=4SvEw&pd_rd_wg=JbWS4&psc=1&refRID=W5QJTYPPC8W58TBPKGT1

Looking to get a rear cargo rack so I can carry two grocery bags on the side. Planning to get baskets like this.

Adopted a bike from someone else, size M, which lists the frame as 54.5cm by 54cm (around 21 inches). Does that mean a rack like this for 26"-29" frames is too big?

Any suggests would be fantastic. Thanks!

Yeah get this Rack instead. No 1-3 month wait time.

I would consider mounting a rear rack using a P-Clamp. I assume you're saying it is difficult to install a rack/panniers because there are no eyelets to attach a rack to on the upper seat stays. However, the P-Clamp solution see here for more details, is an easy DIY fix. If you don't like it, you can remove it without any damage to the bike and do your trade in. P-Clamps are incredibly inexpensive at any hardware store and racks like this are plentiful online for not very much.

If you have any questions, feel free to DM me.

https://www.amazon.com/dp/B0154OMGIK?ref=yo_pop_ma_swf

I've been using these for my 12lb battery. Broke two of them, but after I got the bike shop to bend the flange straight so I could scoot the battery closer to the seat post, it's held up almost a year now.

It’s certainly possible, but I wouldn’t recommend cheeping out, especially on the rack. I got one of these types of things and it lasted a couple weeks before bolts started coming out. I held it together with zip ties for a while then tossed it and got a better one. Another $10 or $20 and you can get a more solid one.

The cheaper bags seems to be fine. The difference with the more expensive ones I upgraded to is waterproofness and fitting a little better to the rack.

https://www.amazon.com/West-Biking-Universal-Adjustable-Reflective/dp/B0154OMGIK/ref=mp_s_a_1_5?keywords=bike+rack+pannier&qid=1557981996&s=gateway&sprefix=bike+rack+pan&sr=8-5

I have this on my Beast. It's perfect.

West Biking Universal Adjustable Equipment Stand Footstock Bicycle Carrier Rack with Reflective Logo, 110 lb Capacity, Black https://www.amazon.com/dp/B0154OMGIK/ref=cm_sw_r_cp_api_QMXEzb8DQ38T9

You can also get racks that attach to the seat stays. I have this

https://i.imgur.com/pCZ9Cfg.jpg

https://www.amazon.com/dp/B01AUY2OWW/ref=cm_sw_r_cp_apa_oQuXzb7EVFHGF


https://www.amazon.com/dp/B003ZMBMQ6/ref=cm_sw_r_cp_apap_8NrDkzVYg5j6F


https://www.amazon.com/dp/B01FC5IN1K/ref=cm_sw_r_cp_apap_uNqKbj8FClvLF

Its not pretty but it works.

Hey guys I am looking for input on my current build. Tried to post earlier but it got removed without telling me why.

I originally bought the basic parts in fall of 2018 which included:

19" GT Agressor Pro from Dick's Sporting - $295

27.5" Conversion Kit 35MPH from LeafBike.com - $508.13

52v 14s9p-pf 25.7AH Triangle Battery Pack from EM3ev.com - $827.4

Rear Cargo Rack from Amazon - $25.99

SKS Velo Snap-on Fenders from Amazon - $21.65

BikeHand Toolkit from Amazon - $49.99

Shimano HG41 from Amazon - $16.70

Torque Arm from Amazon - $16.50

Park fr52 from REI - $7.15

Tire Liner from REI - $17

Tubes from Walmart - $20

Total $1825.51

Hot Damn! Never actually did the math that is quite a bit more than i thought it cost, I'm a little embarrassed I've been telling people that it cost around $1300 lol boy the shipping and tax just kills you!

Anyways it all arrived without issue (Thank goodness) and I put it together (minus the pedal assist due to a crank removal fiasco) with some difficulty as a number of things required modification to work. That rear wheel is an absolute biatch to install. I have had an absolute blast with it both on and off road since then. Only major gripe is with the controller, hella loud and super weak regen breaking.

Just recently decided to do some additional tweaking with the bike. Went on another spending spree over at Aliexpress. Ended up buying the following parts:

Pedals - $21.45

Longer Handlebar - $8.80

External Bearing Bottom Bracket and Cranks - 32.66

Four Pairs of Brake Pads - 5.29

3-Button switch - $27.49

Handlebar Grips - $2.66

Torque Arm - $8.35

Left hand thumb Throttle - $5.67

Lights DC 12v-48v - 20.89

42 tooth Chain ring - 17.60

Pannier - 30.51

1xSchwalbe MTB 27.5 2.25 - 50

Total $231.44

Already installed new bottom bracket and pedal assist (with some modification lol) and its amazing!

I am about to start getting into the electronics so i figured i would ask for advice before i solder everything up in case you guys come up with a better way to do things.

Anywho I am getting rid of those handle grips with the twist throttle in favor of a left handed throttle, this will allow me to shift on the rear cassette a lot easier. Then its on to replacing the super cheap switch (cruise, regen, reverse) with the Aliexpress switch (cruise, horn, lights, gonna short regen for always on) and add lights. Considering adding another on/off point for security but cant think of a great way to do that... Right now i have the BMS on/off at the battery itself (momentary switch) and the power on the LCD display itself.

Also anyone have a line on a cheap controller with strong regen breaking and sin wave fets? I see the ebikes.ca but looks like that requires cycle analyst v3 for pedal assist which doesnt seem to display information nicely plus itll cost around 265 for both...

Thule Pack n Pedal

Or rig something up with P clips and maybe U bolts that attaches a normal rack entirely to the rear triangle. I had a plan thought out to hose clamp some thick aluminum strap to the seat stays, drilled and tapped with rack mounting points. It was easier to buy a hardtail.

I really like these:. https://www.amazon.com/dp/B01N6RORTM/ref=cm_sw_r_em_apa_i_.o1TDbYKRC8MC