Best bike fenders according to redditors
We found 221 Reddit comments discussing the best bike fenders. We ranked the 105 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 221 Reddit comments discussing the best bike fenders. We ranked the 105 resulting products by number of redditors who mentioned them. Here are the top 20.
Two questions:
How much would a splash guard that covers as much as this one does cost?
this one is cheap but does not really look comparable to the one OP modled.
This one seems like a reasonable alternative.
This one looks a lot like the one OP modled, but frankly is more than you would need to spend.
The middle option here is a little over $10 and looks like a pretty reasonable option.
Next question: How much would the filament cost?
I usually pay $20 to $25 per kilo for most filament.
I would also be willing to wager that it's possible to print a decent splash guard with ~250 grams of filament.
https://www.amazon.com/gp/product/B0041X5ZX4/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1
These worked decent for me.
SKS Raceblades in various forms. Like [these](
https://www.amazon.com/dp/B016I66FLC/).
Hey there, fellow SF bike commuter.
I use this for my rear (road bike) wheel. Cheap, stays in place, keeps the rain off. https://www.amazon.com/gp/product/B000X61N2A/ref=od_aui_detailpages00?ie=UTF8&psc=1.
I don't use one for my front wheel - the downtube does most of the work, and my feet take the rest. I ride flat pedals, and purchased FiveTen Freerider Element XVI (weather-resistant) shoes. As long as you tie the laces tight, they work pretty well for anything short of a downpour.
I've got a pretty good setup at work - a fan under my desk to help dry stuff out between rides, and I bring an extra set of commute clothes if it's really pouring.
https://photos.google.com/share/AF1QipNx8GtcmnFCqF_QV3QLETfgbZac1jtRl1i2cGSgmcE9OXs8rt4ztB8pAMg9KT2A5g?key=MkNwV3AzUElRVmEyd01RY0czWlVPUnNaUzlGeUln
Planet Bike Full bike fenders - 700c x 45mm https://www.amazon.com/dp/B00TQ43EXG/ref=cm_sw_r_cp_api_i_hcPjDbBMB3HH7
Had to trim the front arms, and cut the mounting tab off the back. I used a zip tie for now, will secure it direct to the brake bridge when I eventually have the back wheel off.
I've had the bike for a few weeks now and use it almost entirely for commuting. Here's what I've added since I got the bike:
The stock brakes weren't doing enough to stop me so I swapped them out for some Tektro CR720s. I dropped the yoke as far as I could to give myself as much leverage as possible. Braking is much better now and more reliable than the original set ever was.
I added a rack and trunk bag that's big enough to hold my food and clothes for the day. The only modification I had to make here was filing away some metal from rack mounting leg. It was colliding with frame near the dropout and not allowing the leg to sit close enough to the braze on.
Some of the original cable housings that came with the bike had some gouges in them so Nashbar sent me a new replacement cable set. I swapped out all the brake/shift cables and replaced the bar tape with some SRAM cork tape. The original cables from Nashbar were also a bit too long and were causing excessive friction.
I added some SKS fenders per the recommendations of users on this sub. They were a little finicky to install but I got them on in the end. This particular frame doesn't have bolt holes in either of the two rear bridges so I had to resort to the classic zip tie approach.
As far as the bike goes, it's been performing flawlessly so far. It weighs close to 30 lbs now so it's not the lightest thing in the world. However, the steel frame and the large tires really help smooth out the road quite a bit. The saddle is still the most uncomfortable part of the bike, but I'm hoping to swap it out sometime in the near future. Shifting is still very smooth and the 4 trim positions on the 105 front derailleur is a great feature.
If you're considering getting a bike from Nashbar, I'd definitely recommend them. Their customer service was fantastic and everything they shipped usually got to me door in 2-3 days (even the bike!).
While I agree that the $5k figure is more than a bit out there given the context, it's not hard at all to beat the RadCity, at the same or better quality, for less money by going DIY.
This build took me less time to throw together than it took to write it out here:
Gravity BaseCamp 1.0: $299
48v 1000w hub motor kit from ebay: $150
48v 14Ah battery from em3ev + 2A charger + $100-ish shipping to USA: $559 (note: em3ev calls it 47v 13.6Ah because they significantly understate the specs of their cells. Any other manufacturer would sell this pack with these cells as 48v 14Ah. Also, this pack includes per-cell fusing, as well as fuses on the signal wires.)
8-speed freewheel for the hub motor: $22
Disk brake compatible rear rack: $35
Fenders: $32
Labor, at $10/hr, assuming a first-time builder: $40
Total, including labor and shipping: $1137
That's $360 less than the RadCity, including labor, for a bike of similar quality and features, with 100% user-replaceable and user-interchangeable parts. And there's room to cut costs further, if you spend more time shopping around than the 5 minutes I spent.
If you don't want to go through that much trouble, that's totally fine. Not everyone finds value in DIY, or enjoys getting their hands greasy. That's why prebuilts exist and sell well, and for a prebuilt, the RadCity isn't a bad value. But the criticism regarding the move to a proprietary battery is valid, and to imply that it's remotely difficult to improve on the RadCity formula by going DIY is, in my opinion, just silly.
These work great: http://www.amazon.com/X-Tra-Rear-Bicycle-Fender-wheels/dp/B000X61N2A/ref=sr_1_1?ie=UTF8&qid=1458140255&sr=8-1&keywords=sks+fender
Not small enough to fit in a backpack (it'll stick out some) but very easy to install/remove and does a great job catching rear-wheel spray. Clamps to the seat post and can easily be adjusted to fit around a saddlebag/light.
I had the same problem on my bike. Here is what solved it.
https://www.amazon.com/dp/B016I66FLC
For really tight clearance problems try the CRUD road racer mk2
I agree with all this, and in addition I would recommend just getting some cheap sports clothing from your local department store. No need to spend all that money on specialty bike clothes if your commute is only 7 miles. A general sports tee (in the US, my local Target has some sports tees in high-vis orange and yellow for $8) and some sports shorts. Make sure they're made from wicking material or you'll be miserable in the warmer months. For such a short commute though, padded cycle shorts are not necessary. My cycle commute is about 8.5 miles and I've never needed or wanted specialty padded cycle shorts. Most of the year I wear some cheap cargo shorts, in summer it's wicking workout shorts, in the winter I wear lined tights under my work slacks.
Use the money you save to buy some good panniers and fenders.
Get some good lights-- you'll want them just in case you find yourself cycling in low light or if it's cloudy and dark or foggy. At the least, get a good taillight.
If you're worried about sweat and don't have a shower facility available, baby wipes are very helpful. Carry some extra deodorant in your pack too. Bike your route in advance a few times to make sure you've got enough time to get to school and get yourself dressed/prepared.
S-BOARD, by SKS Germany.
SKS Longboards are a go to. Breakaway tabs for safety, excellent coverage.
I used to live at 2nd and Wharton and would ride my bike to Federal/Elsworth and lock my bike up on the North East corner of Broad and Federal on really snowy days. Right here to be exact. I would lock my back wheel and frame to the staple rack w/ a U-Lock and a shitty cable lock between the front tire and the U-Lock. In the 20 or so times I locked it there the only thing that was stolen was one of these plastic mud guards, because I forgot to take it with me.
Replaced that mud guard with mounted ones and never had a problem. I work from home now, so not really an issue.
You can get fenders that strap to the frame. ex: https://www.amazon.com/CRUD-RoadRacer-MK2-Road-Fenders/dp/B00435NFKA
That one is good for very narrow clearances.
I have a Trek 7.2 FX and got Planet Bike Cascadias. Totally worth it.
I have SKS fenders for my MTB and Planet Bike ones for my commuter. They're both absolutely necessary here in Washington. Fenders are the first thing I recommend to people I work with who ask me about commuting. They go a long way to improve the quality of your ride. Congratulations on your first commute.
Here is my list I made for another post. It works from 60 to -10 or so.
Here are my recommendations for surviving a Boston winter:
Bibs, Base Layer, Leg Warmers, Arm Warmers, Thermal Jersey, Jacket, Helmet Cover, Toe Cover, Shoe Cover, Gloves, Balaclava & Socks.
This is almost exclusively Pearl Izumi because it fits me, I can get a good deal on most of it if I wait to buy and the quality is amazing. It is not cheap but I rode almost every week outdoors last year during one of the worst winters we have had in a long time.
Also, do yourself a favor and get a rear fender and wet chain lube. Also staying hydrated is very important as anyone would tell you but it is hard to drink cold water when it is cold so I find this stuff from Skratch Labs really helps. Be prepared to a lot more drive train maintenance due to the salt and sand you will get in your chain and cassette.
Let me know what you have questions on and I will be happy to report back. I don't use all of this on every ride, it is weather dependent but in the middle of winter, I certainly like being able to bundle up and then remove a layer or unzip when needed. It makes riding fun when the thermometer dips below 15°F.
Those fender rods literally can rub you the wrong way. If that happens you can clip them to be shorter.
​
I'm more a fan of the Planet Bike full fender, which uses supports like this...
https://www.amazon.com/Planet-Bike-Full-bike-fenders/dp/B00TQ43EXG/
​
https://www.amazon.com/Planet-Bike-Full-bike-fenders/dp/B00PAFELMI/
​
With these the rod adjusts inside of a sleeve near the mount point. Cleaner and easier IMO.
As far as the instant fenders go I really like the Full Windsor because the area of coverage. You might argue it's negligible since the ass saver covers the main area of spray but I've never tested and visually it looks superior albeit more bulky.
But this doesn't solve the issue for the front and you will have a lot of water on your feet and drive train without a front fender.
Raceblades are pretty thin and again might work with the bike you already have.
But ultimately as /u/autophage said, you don't want to pick a bike around it's fender capabilities because most bikes will accommodate fenders one way or another. You should think more about what kind of geometry (which affects the way you sit on the bike and overall comfort of the ride) you would like in a fixed gear and then focus on price range and then maybe fender type.
Check out /r/FixedGearBicycle and the sidebar for recommended bikes. And if you are worried about maintenance don't shy away from your LBS (local bike shop) because they will be helping you with a lot of the instillation and maintenance and establishing a relationship with them can be extremely helpful.
Pro tip: bike most mechanics love beer as tips.
http://www.amazon.com/Crud-Roadracer-Fender-Set-Black/dp/B00435NFKA/ref=sr_1_1?ie=UTF8&qid=1415554901&sr=8-1&keywords=crud+roadracer
A little delicate but they work and look nice.
I got this one:
https://www.amazon.com/gp/product/B016OV15KC
Is this garbage?
Links to accessories:
Fenders $37: https://www.amazon.com/gp/product/B00TQ43EXG/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Rack $33: https://www.amazon.com/gp/product/B00AA8GFSI/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=UTF8&psc=1
Pannier $55: https://www.amazon.com/gp/product/B07FNP4JZ4/ref=ppx_yo_dt_b_asin_title_o06_s02?ie=UTF8&psc=1
Headlight $68: https://www.amazon.com/gp/product/B01N4ANAPU/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
FYI if you're looking for fenders to fit those fatty tires while touring, SKS P50's do the trick. I have them wrapped over the 42c tires on my Charge Plug. Really keeps you and the bike clean on those muddy roads!
Edit- sweet bike btw, love Konas!
Just purchased its more substantial cousin. It's cheap, easy on/off, and adjustable. Do recommend.
For rainy riding; full coverage fenders work the best. Something that hugs the tires fairly well. Something like this (just an example, I can't vouch for the product):
https://www.amazon.com/Planet-Bike-Full-Fenders-Touring/dp/B00TQ43EXG/ref=asc_df_B00TQ43EXG/?tag=googleshopc0c-20&linkCode=df0&hvadid=293004696205&hvpos=1o3&hvnetw=g&hvrand=18344359097057539491&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9001133&hvtargid=pla-593788812954&psc=1
I have used some metal fenders from a cruiser bike and attached them to my frame.
SKS Raceblades. I've got them on my bike which has something like 1/2" clearance between the tire and the downtube. They fit perfectly.
Rain jacket, pants, and booties will make you impervious to rain. Best cheap option is helly hansen. Sure, bicycle specific rain pants are better suited, but they cost >$60.
You should get full fenders. They will keep the spray off your back, and keep your lower legs drier when you aren't in rain pants.
I like having wider tires, so I bought these SKS brand. https://www.amazon.com/dp/B00F6648XI/ref=cm_sw_r_cp_apa_U5v.yb6G68N91
SKS P50 Black Chromoplastic... https://www.amazon.com/dp/B00F6648XI?ref=yo_pop_ma_swf
Running these on my Topstone with 40c WTB Nanos that measure out at 43mm
Those fenders are too small, I'm guessing your Marlin 5 has 29er wheels, I had a 2018 in a LRG frame and it had 29" wheels.
What about something like this?
https://www.amazon.ca/dp/B01M0C55MK/ref=cm_sw_r_cp_awdb_t1_hWg.BbPB01KVK
I use these front and back and they work great, cheap too:
https://www.amazon.ca/dp/B01IU5HI8I/ref=cm_sw_r_cp_awdb_t1_PYg.BbNKZ5V5B
Try searching "bike fender 29," on Amazon, should bring up a ton of results.
https://www.amazon.com/Ass-Savers-SmartAss-Bicycle-Fender/dp/B017P3LGFW
I have SKS Longboard fenders on my dedicated commuter bike, which has disc brakes and an internally geared hub. They're plastic with a metal core, so they're strong and they don't rattle unless I'm on really rough roads. They come in sizes to fit various wheels and tires.
https://www.amazon.com/s/ref=nb_sb_noss?url=srs%3D2600679011%26search-alias%3Dspecialty-aps&field-keywords=long+board
I also have a set of SKS Raceblade Long temporary fenders that I swap from bike to bike.
https://www.amazon.com/Raceblade-Bicycle-Fender-18-23-Tires/dp/B000X5ZKD4/
I'm perpetually tempted to get theses "CRUD RoadRacer MK2" fenders, which attach much like the Raceblades and look pretty sensuous. I've considered buying them internationally, but now that they're distributed in the US I might have to give them a shot.
https://www.amazon.com/CRUD-RoadRacer-MK2-Road-Fenders/dp/B00435NFKA/
If you're worried about sucking it into your front tire, a nice compromise would be a downtube fender. They kind of blend in, and they keep a lot of the spray directly off your engine and you.
Edit:
Just like this one.
SKS Mud-X Front Bicycle Fender https://www.amazon.com/dp/B000X5ZK6Q/ref=cm_sw_r_cp_apa_i_l7XPDbYN4KVY1
It does twist around when carrying or transporting the bike. When riding it does it's job though, and it costs $18
It's SKS S-Blade Rear Fender for 700c wheels
https://www.amazon.com/dp/B008ZTLR3C/ref=cm_sw_r_cp_api_QczyybGC2E0A1
These are what I use, and they've been great so far. Good protection, they don't weigh a whole lot, sturdy construction, not too expensive, etc.
My main gripe is that they, like the ones you've tried, will require quite a bit of fiddly adjusting at first until they're perfect. At least, mine did. And if you take a spill, you'll likely need to re-adjust them again.
Plus, they're not the simplest to install, so quick, hassle-free removal, if that's something you're after, isn't really going to happen. They can be taken off, but mine bolt on between the frame and the brakes, so it's a bit of an involved process. And the rear one bolts on on the plate where the kickstand would go, and that definitely requires removal of the rear wheel to access. So, my fenders just stay on all the time. It's not been a bad thing, though, as I simply don't worry about it.
nothing special really
http://www.amazon.com/SKS-X-Tra-Bicycle-Fender-Black/dp/B000X61N2A/ref=sr_1_1?ie=UTF8&qid=1290926211&sr=8-1
Hello and welcome to the wonderful world of alternative transportation. Instead of just bragging about how awesome bikes are, I thought I'd link to a few bikes that are reasonably priced and come with fenders and/or racks for year round enjoyment. I ride year around with minimal fender coverage and I do just fine on my 8 mile commute from Ballard to Downtown, although I'm lucky and work for a non-profit, so we have showers in the building for commuters. I know thats not an option for a lot of larger companies. I mention this because it makes a big difference since my office is on a big hill and I get a little sweaty. But a whores bath, clean clothes and deorderant worked for me before working somewhere with showers.
Anyway, I tried to find bikes under $3k. Sounds like a lot of money, but then again my dinky fiat 500 with a 1.4 4-banger was $19k and is currently in the shop thanks to a hit and run.
Specialized AWOL "Elite" $1500 (disc brakes, fenders, racks, lots of gears, comfy handlebar and seat placement / geometry):
http://www.specialized.com/us/en/bikes/adventure/awol/awol-elite
Specialized AWOL EVO $2500 (same as above, includes friction powered headlight, hydraulic disc brakes):
http://www.specialized.com/us/en/bikes/adventure/awol/awol-evo
Kona Sutra $1500 (same stuff as above mostly, just a different brand):
http://konaworld.com/sutra.cfm
Trek District - 3 models from $800-1100 fenders, rack, gears or single speed options:
http://trekbikes.com/us/en_US/bikes/city/urban-utility/district/c/B441
Trek Lync - $1000-1500 - has fenders, gears and lights built in, disc brakes, smartphone connection for tracking miles, etc:
http://trekbikes.com/us/en_US/bikes/city/urban-utility/lync/c/B442
If you already have a bike but don't know shit about bikes and want to get fenders:
Portland Design Works:
Full Metal Fenders - $120 nice full coverage of the wheels:
https://www.ridepdw.com/goods/fenders/full-metal-fenders-city
Also from PDW, less coverage but cheaper:
https://www.ridepdw.com/goods/fenders/sodapop-fenders
Raceblade fenders are what I use, almost full coverage about $50:
http://www.amazon.com/SKS-Raceblade-Bicycle-Fender-Set/dp/B0019JNTLS
The lights just flickered at my office and now our connection is 5400 baud. Hope that helps some of you try something else besides the bus and driving alone. Any bike shop will be happy to get some fenders on your bike, theres always a solution and the nice thing about shopping from a bike shop instead of online is that you're supporting the local economy. Well I guess you're supporting local when you buy from Amazon too.
On the minimalist side, you can try raceblades.
For full coverage (assuming your bike has clearance and mount points), SKS longboards come in multiple widths. The narrower ones should work with calipers and 23's.
SKS S-Blade Rear Fender for 700c wheels https://www.amazon.com/dp/B008ZTLR3C/ref=cm_sw_r_cp_apa_i_OCLQCbY7RVWGP
Some ol' SKS Chromoplastic P45's. Originally wanted to get some Velo Orange mudguards, but those were on sale. Was concerned about rattling, but it's been quiet so far.
I feel like they work best when your tire size is 10mm less than the max rated tire size, 35mm is just plush enough for my intended riding. Amazing how much gunk the fenders cover you from.
clip ons will be your best bet. here you go. sks raceblade wont keep you as dry as full wrap fenders but totally worth the dryness.
also, always wanted to give these a shot...
crud road these were designed for race-bikes turned into commuters, probably would work.
Check out those
Back when I rode a 7.2 FX, I installed these: https://www.amazon.com/gp/product/B0041X5ZX4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Fit fine, worked great.
I have a very similar build, but with a Diamondback Overdrive 29er. r/eBikes thread here. I have broken numerous chains, chainrings, etc. along the way and have ridden over 1200 in the past couple months now that I am commuting with my bike.
You mentioned that it will primarily be used for commuting, so paying attention to maintenance is going to be huge. Depending on your terrain and weather type, wheels and brakes are going to be extremely important. I have tried both normal brake pads and eBike specific brake pads and both wear down just as quickly for me. I live in a very hilly area and commute 25 miles per day, so I have to buy new brake pads every other month. I am finally about to have to rotate my tires to make them last a little longer, but I am definitely upgrading from the stock tires to some Schwalbe eBike specific tires soon.
I originally went with the BBSHD 42T sprocket, but eventually bought a 52t chainring off Amazon and snapped it after a couple weeks. On top of that, I dealt with a ton of chain droppage in the beginning. I tried a ton of different things, but none worked. It wasn't until I snapped my old chainring and bought the Luna Eclipse chainring that my chain stopped dropping. Also, make sure your gear sensor is fastened to your bike securely and isn't going to move. Sometimes mine will loosen and stop triggering...which caused my Luna Eclipse chainring to bend slightly because of the gear shift, threw off the chainline, and wreaked havoc on my commute. I am seriously considering upgrading to an internally geared hub soon as a result of most of this (plus to be able to shift while stopped...damn hills).
I carry a bike toolkit with me in case anything happens on my commute (extra chain, chain opener/closer tools, wrench, pliers, air pump). This has saved me a TON of calls to my fiancé to pick me up when I am stranded because I broke something on my bike.
Overall, your build looks awesome. If you're spending that much on your bike, consider trying to get a full-suspension bike. I wish I did.
Definitely make sure you pick up some fenders. I have had quite a few stolen until I settled on these that work great and require a bike tool to be removed. Make sure you get a good pair of gloves too. I took a bad fall once and the concrete burned through my nylon gloves in an instant, but I am still happy I had them on. If you want your phone on your bike, I have tried about 4 different mounts and this one is my absolute favorite.
I have had my bike for over a year, so don't feel the need to jump all in right away. Ease into it. I knew very little about bikes before taking the plunge. It has been a hell of a ride and so worth it. Welcome to the club!
It does the job for something that's easy to take off and on.
Here it is on Amazon.
Fenders: these or these
Rack: Axiom Transit
Lights: Front and tail. If you want a rack-mounted tail light: light and bracket.
Helmet: go to your LBS and try on a few. One-size-fits-all helmets are not as comfortable.
Other: I'd also recommend a puncture kit for when the inevitable happens. Tube, tire levers, CO2 inflator and cartridge.
SKS Xtra dry 3
If you are thinking about just using guards and no rain suit/change of clothes then you are in for disappointment, I think.
I commuted on my hardtail for a couple of years and I still ride the city in the rain. I think they're pretty good but I definitely needed a change of clothes both because I sweat like crazy and my lower half would get kinda grimy.
I use these SKS fenders. Definitely kept most of the muck off of me.
Front: http://www.amazon.com/Germany-Shockblade-Fender-29-Inch-Bikes/dp/B008ZTLQKQ/ref=pd_bxgy_sg_text_y
Rear: http://www.amazon.com/SKS-X-Blade-Bicycle-Fender-wheels/dp/B008ZTLQUG/
One like the rear would help, but really something longer would be much better.
Another option would be to go the whole hog and just get some SKS Longboard fenders - a relatively neat option with excellent coverate and tidy muflaps that won't look too out-of-place nerdy on that bike.
I have a revenio 4.0 and ended up getting a set like this of these.
Also, the Revenio is what really got me back into road riding. It's a kick ass steed. I would kill for the full carbon frame set they made this year.
Mountain bike fenders don't look like commuter fenders, they're more heavy plastic clip-on things:
http://www.amazon.com/dp/B000X61N2A
http://www.amazon.com/SKS-Raceblade-Bicycle-Fender-Set/dp/B0019JNTLS
I'm a simple man. I have a bright green backpack, 2 rear niterider lights and 1 front light, and a phone holster for blasting progressive metal and checking the time.
Edit: guess I have fenders too.
SKS-Germany Shockblade Fender, 28"-29", Black https://smile.amazon.com/dp/B01LWRA921/ref=cm_sw_r_cp_apa_i_agchDbTJA40DX
SKS-Germany X-Blade Fender, 28"-29", Black https://smile.amazon.com/dp/B01M0C55MK/ref=cm_sw_r_cp_apa_i_ZgchDb5JVJNS4
Nite Ize HandleBand Universal Smartphone Bike Handlebar Mount, Black https://smile.amazon.com/dp/B00FU4N4JU/ref=cm_sw_r_cp_apa_i_IcchDbMRX24SG
NiteRider Lumina 750 Boost Combo - Performance Exclusive BLACK https://smile.amazon.com/dp/B01HEF5P62/ref=cm_sw_r_cp_apa_i_FechDb0FX9VEV
I've always been a fan of the ol' Beaver Tail.
amazon. They are made of plastic
What style fenders do people like? Is a front one ever necessary? Most of the splash is on my back. I was looking at this one (link) which seems pretty popular, but it's a funny shape.
For more comfortable, I would consider buying a rear fender. At least you won't get the mud trail up your back when you bike in the rain/slush.
For safer, I would buy yourself a high visibility vest, like this. Do you own a helmet? You should get one of those as well.
its the SKS mudguard: https://www.amazon.com/X-Tra-Rear-Bicycle-Fender-wheels/dp/B000X61N2A/ref=sr_1_1?s=outdoor-recreation&ie=UTF8&qid=1486680251&sr=1-1&keywords=SKS+rear+mudguard
Yes 29".
Thank you it looks like good mudguards
edit : I'll take this one too for the front https://www.amazon.ca/SKS-Germany-Shockblade-Fender-27-5-Black/dp/B01LWRA921/ref=sr_1_15?s=sports&ie=UTF8&qid=1543271252&sr=1-15&keywords=fender%2Bsks%2Bavant&th=1&psc=1
That's pretty much how I started my 2 mile commute in 2015. I went reading and bought the Wirecutter's reccommendation at the time, a Trek 7.2 (though I did go for the 2014 7.4 Disc, since my shop had it on a good sale). I added fenders and a kickstand immediately, grabbed a cheap (but safe) Wal-Mart helmet and lights, and started riding when the weather was decent. As I needed them, I added elastic, reflective ankle bands to keep my jeans out of the chain, got a set of decent gloves for cooler weather, a rear rack and expandable trunk bag, upgraded my lights, and bought a cheap bike computer from Aldi.
 
After a few years, I had a better idea of what I really wanted, so last fall I sold the hybrid and picked up a gravel bike to get off the 50mph highway and onto the gravel shoulder and replaced my helmet with a more comfortable and better ventilated one. I moved over the rear rack, bought new, larger fenders and a kickstand, but didn't bother with the computer and just got a handlebar phone mount since I track everything on Strava anyways.
 
Of course I don't NEED all of this to bike commute, but it makes it easier/more comforable/etc. to do so. The only thing I've regretted is the fancy gloves: they work just fine, but I could have spent half the money and gotten something just as well suited to my needs. Thankfully I'm in an area with basically no bike theft, so I just use a cheap cable lock on the rare times I even bother to lock it up.
Crud Road Racer 2 fenders will probably fit. They're a little difficult to get aligned right without wheel rub, and the bolts/nuts that hold the parts together are complete shit because they're nylon. I replaced them with steel bolts/nuts and it works well now.
Thank you. Planet Bike fenders
Getting some clip-on fenders could help a lot. I put this and this on my cross bike and my feet still get soaked but the face splash and back stripe are gone.
How would does the sizing work on SKS Raceblades, and is the fit pretty universal with most fixed? The bike I am riding is 58cm with 700 x 28 wheels.
http://www.amazon.com/SKS-Raceblade-Bicycle-Fender-Set/dp/B0019JNTLS
Are there plastic fenders that sort of length (and cheaper!)? they don't have to be quite so long, but I find something which stops at 9 o'clock or so to be inadequate - 7:30 would be where I'd want it to go to, plus flap to a couple of inches off the ground - otherwise your feet and chaingear still get it.
Edit: perhaps this I suppose.
My best guess for the fenders: https://www.amazon.com/dp/B00PV0B184/_encoding=UTF8?coliid=IX1DF52HCLM4&colid=21WAUTA8QL369
From: SKS S board SKS-Germany 11317 S-Board Bicycle Front Fender https://www.amazon.com/dp/B016OV15KC/ref=cm_sw_r_cp_api_i_1jx4Db8TMX3FS
Rear: axiom rear runner
https://www.fyxation.com/products/axiom-rearrunner-fat-bike-fender?variant=24374888709&currency=USD&gclid=EAIaIQobChMIvKWa6pWQ5gIVTZyzCh1HawttEAQYASABEgId-_D_BwE
http://www.amazon.com/SKS-Longboard-Coverage-Bicycle-Fender/dp/B004I91WQU/ref=sr_1_2?s=sporting-goods&ie=UTF8&qid=1368139544&sr=1-2&keywords=sks+fenders
and
http://www.amazon.com/Vittoria-Zaffiro-II-Wire-Black/dp/B001D3F4ZY/ref=sr_1_2?s=sporting-goods&ie=UTF8&qid=1368139566&sr=1-2&keywords=zaffiro+II
Non-mobile: http://www.amazon.com/dp/B00F663XMU
^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?
If you're on a budget (after buying everything else) what I did was I bought a small flashlight that is compatible with 18650 rechargeable lithium ion batteries for pretty cheap and that works pretty well for general purposes. The battery is powerful enough to provide visibility while riding through the city. I wouldn't use just a regular flashlight with cheap batteries though.I use a bungee band to tie it on to the handlebars and it works very well (you can see it on the picture I posted earlier).
This has also been useful for night time riding and getting a flat. I can easily remove the flashlight and use it to see what I'm doing.
I also highly recommend the road morph g that zedmartinez recommended. It's PERFECT for cycling. I was looking around for a small pump with a hose and pressure gauge and that was the only one that fit the criteria that was any good.
As for fenders, they don't come with the window tourist (if you decide to get it). I got these fenders and they're perfect. They have a mudflap, are sturdy, and most importantly they look pretty good.
SKS Chromoplastic or Long Board fenders definitely will fit. I have the P50 Long Board on my Marin Muirwoods 29er and it fits around my 42mm tires. The 50 indicates that the outside of the fender is 50mm so you'll need 50mm at the fork and seat stays to clear this one. At the chainstays/bottom bracket it narrows so you need less space there but i don't have a measurement for you.
http://www.amazon.com/gp/product/B00F6648XI
I just bought this detachable rear mudguard ($15 on Amazon) about a week ago and so far I love it. It's ugly as sin but damn if it doesn't work like a charm. Super quick and easy to put on/ take off the seatpost. Rode in the rain last weekend for several hours and didn't get a bit of water slung up my back.
I use one of these for my back wheel when its wet out
Gonna focus on winter here because I'm not satisfied with my own rain setup yet. Although I will strongly advocate for front and rear fenders like these SKS longboards to keep you drier and cleaner.
I found this blog post to be helpful when I started bike commuting in the Boston area in the winter. Might be useful to you since you are on a budget (as am I). Scroll down to the clothes section for some good recommendations.
The best general piece of advice for cold weather commutes I can give is to dress so you will feel cold when you begin your commute, because you will invariably heat up once you get going (say, within 5 minutes).
Things that are maybe worth spending a little money on:
THESE look interesting. I've been researching a bit and these seem like the slickest. Yes, I want the practicality of fenders, but, also - it's my road bike and I want it to not look overtly dorky.
I have the SKS longboard fenders on a Sirrus with the same sizes tires as OP and they are awesome. Only negatives are the installation, which is a little complicated, and you need to buy a longer bolt to install the from fender. They provide an assortment of bolts but none are long enough to attach the front fender to the fork.
Ps they are also available on amazon http://www.amazon.com/gp/aw/d/B00F663XMU
AmazonSmile Link: SKS rear mudguard Xtra-Dry 26 inch
^Use AmazonSmile to donate 0.5% of your purchase price to a charity of your choice at no extra cost to you.
I got some SKS s-blades. Stops the skunk stripe up the back and easy on and off.
https://www.amazon.com/gp/aw/d/B008ZTLR3C/
This one works pretty well for the back wheel and is really convenient.
http://www.amazon.com/X-Tra-Rear-Bicycle-Fender-wheels/dp/B000X61N2A/#
I'd use SKS raceblade.
https://www.amazon.com/dp/B016I66FLC/ref=twister_B01CTGT5OY?_encoding=UTF8&th=1