Best cell phone screen protectors according to redditors

I've got the note 3 and it's a Zerolemon 10k. I ordered it off amazon. (It turns the phone into a hefty little fucker, but if size was a problem, I wouldn't have picked up a Note 3 anyway. It still fits into my pocket, so I'm fine with that.)

It's pretty surprising how much of a stress relief there is never having to wonder if there's a plug anywhere, or asking for the table near an outlet, or rushing to finish the phone call before the battery runs out.. The sucker just stays on.. Totally worth it for anyone looking for a battery that hauls.

https://www.amazon.com/dp/B073RV6PQD/ref=cm_sw_r_cp_apa_K3RdAb42ZVY78

I got this one after going through two different glass ones (mentioned in the article). Love it. No issues so far. It's not glass, but at least this one stay on my screen. The other two I had were actually raised up along the edges so they would come off if you even look at it wrong.

I bought the 6P used a couple months ago and got an iCarez.

If I remember correctly, it had an outward-facing thick plastic film with tabs on the top/bottom for very easy placement/installation.

I use this and it hasn't had any dust or peeling problems https://www.amazon.com/gp/aw/d/B01ACXSKAG/ref=ya_aw_od_pi?ie=UTF8&psc=1

Glass screen protector.
https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_i_sr14Ab7M4AETW

Slim fitting case.
https://www.amazon.com/dp/B076FR65F9/ref=cm_sw_r_cp_api_i_Zr14Ab6J1VP0V

Wireless fast charger.
https://www.amazon.com/dp/B0798KFDPB/ref=cm_sw_r_cp_api_i_Ns14AbCN5MRYT

You won’t regret it

Normally I would recommend IntelliArmor, but the flat TGSP was delayed and early reports are that the curved glass one is garbage.

In the meantime, I like Pure Gear. I have never seen anyone else on this sub mention it.

It is not particularly better quality than any other similarly priced screen protector, but it is the only one I have seen which includes an installation tray. As long as all decent TGSPs have colored bezels, I feel like the installation tray is a big deal.

Additionally, Pure Gear is the only brand I have seen which will pay to fix your actual screen if the screen protector fails to protect.

Edit: Proof they will pay to fix your screen — Front of box. Pure Pledge insert.

If you do not want to spend more than $20, amFilm is pretty much your only option. The quality is not significantly lower than the Pure Gear one, but no installation tray.

Most of the low review scores for the amFilm are from bad adhesive on the first batch, but this was corrected. The rest are usually from edge sensitivity issues, but that turned out to be a software problem and will be fixed soon. These guys actually have good customer service and sent me a free replacement when they updated the adhesive, but I have not applied it due to having already put the Pure Gear on. For the record, I had no problems even with the original adhesive. I just broke the protector (which was completely my fault, not the protector's).

Armorshield is what I have, it's good.

This is it

https://smile.amazon.com/gp/product/B01ACXSKAG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Orzly tempered glass screen protector is definitely the best one that I have used. It is $8 on amazon right now http://www.amazon.com/Orzly-ORZTGSCRPRO-Premium-Tempered-Protector/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1452821582&sr=8-1&keywords=orzly+oneplus+one

I use this: https://www.amazon.ca/gp/product/B00LKYW6M0/

It works... OK. If you apply it for 3 nights in a row, the oleophobic layer can last for ~3 months - then you have to reapply it.

One thing I noticed, is that sweat absolutely destroys the coating (maybe from salt?). I stopped carrying my phone with display facing my leg, and the coating is lasting for much longer.

I am going to give you my conclusions after reading alot about this topic before I got mine.

The best one so far is Whitestone dome. If you can get it, do so and save yourself from wasting your money on products that wont work. Although it is the best, it is not perfect.
Cons:

• It is expensive.
  -People find difficulties in installing it(I did not).
  -The adhesive on the edges keep collecting dust and dirt.
  I have it on for 4 days so I am not sure if there are more cons.
  mobilefun.co.uk sells it. See if you can get it from there.
  
  Zagg has a new Fully adhesive that is currently out of the stock. I don't know when it is coming back. I've not seen reviews on Note 8 TG. But I've read on s8 reddit that is very good. If you are not in a rush and you can't get the the whitestone then maybe you should wait for this to be available again and see what do people who already have ordered it say about it. Please note that I'm talking about Zagg ELITE which is a newer version- Their older version sucks.
  https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-note8
  
  If you cant get get Whitestone and dont want to wait for Zagg's then have a look at those.
  
  1-
  https://www.amazon.com/gp/aw/d/B077GSJ55T/ref=mp_s_a_1_2?ie=UTF8&qid=1517590774&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=singularity+note+8
  
  This is fully adhesive. I read on XDA that its very good. Some complain that it doesnt stick properly on edges
  
  2-https://www.amazon.com/gp/aw/d/B074G1W2RC/ref=mp_s_a_1_1?ie=UTF8&qid=1517590932&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=note+8+tempered+glass&psc=1
  
  This one only sticks at the edges but I ve read that it sticks really good and doesnt have sensitivity issues with the screen like other tg that are only adhesive to edges.
  
  3-https://www.amazon.com/dp/B077MJXNJP/ref=cm_sw_r_other_apa_DFUpAb1B233AY
  
  This is a newer version of OTAO which I ve read that it is very good.
  
  
  Those are the only ones that I got the impression that they may work from others' experiences

Here ya go!
Wireless Charger, Clear Spigen Case, Spigen Car Mount Case, Peel Case, Glass Screen Protector, Apple Watch Stand, Airpods Stand.
I realize that the magnetic Spigen case won't work with wireless charging, but it's specifically going to be used as a car mount case for long drives/trips etc. These are Canadian links to Amazon, unfortunately.. but I'm sure that they should be easy to find elsewhere.

Thanks for that. Here are the links for Amazon & Ebay respectively for those who are interested:

Orzly® - OnePlus ONE Premium Tempered Glass

ORZLY PREMIUM 0.3mm GLASS SCREEN PROTECTOR FOR ONEPLUS ONE SMARTPHONE

http://www.amazon.com/Yootech%C2%AE-Motorola-Tempered-Protector-Superslim/dp/B00NWL33OO

For those who are not on mobile

I bought the Anker one because I've been happy with their other products so far, plus you get an alignment frame, which is helpful. I know I'd get it crooked otherwise
https://www.amazon.ca/Anker-Protector-GlassGuard-DoubleDefence-Technology/dp/B074YXH9WX/ref=sr_1_1?ie=UTF8&qid=1509553613&sr=8-1&keywords=anker+iphone+x+screen+protector

If you want one that works with your case:

Ideally the Griffin TGSP or the intelliArmor HD TGSP, but both are sold out right now. They're well cut out, have adhesive all over the screen protector, seemingly high quality, and work well with cases.

The amFilm TGSP is what I went with temporarily. The updated adhesive one sticks just fine, and it doesn't collide with the case at all while still covering the screen.
Provides solid enough protection, and it's not really noticeable that there is adhesive only on the edges. The dot matrix on it does suck, but isn't that noticeable while looking at the phone straight on.

A lot of others I've read are poorly cut out, have poor adhesive, or/and are very difficult to put on. Not problems with the amFilm at least, though I'd still prefer full screen adhesive & no dot matrix.

3D TGSPs are good if you don't expect to use them with a case. They do cover the edges of the screen better, though I don't feel unprotected in any way with a flat TGSP & a case. If you try to use a 3D TGSP with a case, the case edges might apply pressure to the edges of the 3D TGSP, making the screen protector come off or break prematurely.

For anyone curious about liquid screen protectors: they are fine for scratches, but unlike the TGSPs, they won't absorb impact as well in the case of a fall. This makes the screen more susceptible to cracking than if you were using a TGSP, so stick to those IMO.

These would be great and probably are great for business but for home users not so much

• Cost
  Sata Dom is £70 for 32GB vs £20 for 120GB ssd
  
• it uses a SATA port that could be used for a HD
  
  I'm sorely tempted to get a USB3 to SATA adapter and use a SSD
  
  
  

Does this fit the XL?

EDIT: Here's the link to the XL version

https://www.amazon.com/gp/aw/d/B01N63XLQ6/ref=pd_aw_sbs_107_1?ie=UTF8&psc=1&refRID=VEN3PD6H66W3RSTWW1YM

How is the Zagg protector? I currently have: https://www.amazon.com/gp/product/B075WW69PS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 and it is terrible.

Whitestone dome is junk. I've had two, and both started breaking by themselves within hours/days. Not to mention Whitestone customer support is easily the worst I've ever dealt with. It took them 3 months to reply because "they were having technical difficulties and didn't see my concern," then another 2 months to reply to that. On my second round (new phone), it's been six months and all they've done is closed my ticket twice.

Oneplus 7 Pro Tempered Glass... https://www.amazon.com/dp/B07RRVMX2Z?ref=ppx_pop_mob_ap_share

It's better, cheaper, and they have support that actually returns emails.

This: http://www.amazon.com/gp/aw/d/B00NWL33OO I didn't have a problem with it sticking to the edges.

iCarez. $7.95. 4.5/5 stars. 300+ Comments.
Tried and tested.

Is it this one? - https://www.amazon.com/dp/B01N63XLQ6/

I use the otterbox commuter and this screen protector:

https://www.amazon.ca/gp/aw/d/B01N8S5R93/ref=pd_aw_sim_107_2?ie=UTF8&psc=1&refRID=7TJSS50BY6DCW5EA7ECC&dpPl=1&dpID=618X2%2BQ1JiL

I like this Spigen one. It's a wet application, so it's a bit harder to apply than the glass ones, but there's no bubbling in the center. If you apply it exactly right, the edges won't get raised up by a case. I've read some people have had success with this Whitestone one, but it is more expensive.

This appears to be the only one that will cover the whole screen:

https://smile.amazon.com/Whitestone-Dome-Galaxy-screen-protector/dp/B06ZZBPXMK/ref=sr_1_3?ie=UTF8&qid=1493011116&sr=8-3&keywords=whitestone+dome+glass

edit: Added youtube video on how to install it:
https://www.youtube.com/watch?v=-Fd5XlTXYXE

MaxBoost has Amazon Prime shipping and 3 tempered glasses for $10 with a tool to help you align the protector.

link

As for cases... I have:

iPhone X Leather Case - Saddle Brown

link

iPhone X Silicone Case - White

link

Speck Presidio - Clear

link

Cloth Case (Recommended on Reddit)

link

The best case in my opinion is this one by Urban Armor Gear. They're very rugged and barely make the phone thicker. I've used them on all my phones. My note 3 from 2013, my S7Edge, and now my Note 8. Never had any issues with them breaking or colors changing over time.

As far as glass screen protectors this one from amazon is pretty good. It even comes with a plastic guide so the protector gets perfectly aligned. The only problem is I can't use the screen protector and my UAG case at the same time. So I'm just using the UAG case by itself because that seems more substantial than just the screen protector.

This has nothing related to the aforementioned topic but if you have scratched your OPO, using a glass screen protector can sometimes hide the scratch and will smooth it out.

http://www.amazon.co.uk/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=cm_cd_ql_qh_dp_t

Hi,

I recommend checking out Orzly's tempered glass screen protector,

UK LINK

US LINK

Its served me really well.

Hope this has helped!

Yes it would.

I have always liked this one from Yootech

I actually just ordered this one courtesy of another redditor on /r/Nexus 6 referring me and put it on today. Let me tell you, it's actually flawless if done right. The one thing that sucks about the Nexus 6 is that the protectors are slightly smaller than the whole screen cause of the curved edge, but it still covers more than enough. I'm satisfied!

icarez tempered glass was hands down the easiest screen protector i've ever installed, and in fact, the only install i would consider a success. zero bubbles and easy to get it lined up straight.

http://smile.amazon.com/gp/product/B0168XT3E6?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00

Get this: https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Replacements-Anti-Bubble/dp/B01ACXSKAG/ref=sr_1_3?ie=UTF8&qid=1542124903&sr=8-3

Easy to apply, and very durable.

https://www.amazon.ca/gp/product/B01N63XLQ6/ref=od_aui_detailpages00?ie=UTF8&psc=1

Canada link for those like me, in Canada :P

this is the one I'm talking about. It's absolutely fantastic. There are absolutely no sensitivity problems at all. It adheres pretty well.

It doesn't bubble, but like with any tempered glass screen, if you don't place in correctly and peel it on and off too many times, it can warp a bit. This happened to me once, but it was because I had a Pixel RMA and I tried to move the glass from my old phone to the replacement one. It honestly wasn't too bad. It's not a bubble, but a slight discoloration in the center that you only notice when the screen is off.

Nevertheless, I bought a new screen and it's absolutely fantastic. Trust me, this is the best tempered glass I've ever used. It actually makes the phone look better.

I HIGHLY recommend this protector: https://www.amazon.com/gp/product/B073DLZWX7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Comes with a plastic guide to ensure proper placement.

Maxboost Screen Protector - $10.99

• Tempered glass sceen protector because the soft plastic ones get dirty/stained and peel off after a while. Trying tempered glass for the very first time.
  
  Spigen Liquid Crystal - $10.99
  
  
• Clear because the phone looks great naked.
  
• I don't like how thick this one is but if I go thinner like the Spigen Air Skin it is no longer transparent.

I'd personally recommend this one:

https://www.amazon.com/gp/aw/d/B075WW69PS/ref=yo_ii_img?ie=UTF8&psc=1

My wife and I are both currently using the "updated adhesive" model, and it's already saved my wife's screen twice.

• Dot matrix is only noticeable with the screen off, or in bright daylight when viewed at a particular angle.

• There's a tiny "rainbow" effect, once again only noticeable with the screen off, or in bright daylight when viewed at a particular angle.

• The "3D" curve doesn't quite cover the entire glass front, but it does absolutely well enough that you'll forget it's there after a short time.

Just my take on the matter. Personally, I'll take the few, small trade-offs over a broken or scratched screen any day.

The monitor is a BenQ ZOWIE XL2540 24.5 inch 240 Hz.

The arm:

https://www.amazon.co.uk/gp/product/B0765Y4CT5/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

GET THAT MONITER OFF THAT DESK, DOO DAAAR, DOO DAR

GET THAT MONITER OFF THAT DESK, OH DA DOO DAR DAAAAY!

https://www.amazon.co.uk/gp/product/B0765Y4CT5/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

POP THAT MONITER NEXT TO THE LAPTOP SCREEN, DOO DAR, DOO DAR

POP THAT MONITER NEXT TO THE LAPTOP SCREEN, OH DA DOO DAR DAY

https://imgur.com/a/jtTBgmy

YOU ONLY NEED ONE TASKBAR ON A DUAL DESKTOP DISPLAY, DOO DAR, DOO DAR

YOU ONLY NEED ONE TASKBAR ON A DUAL DESKTOP DISPLAY, POP IT ON THE RIGHT HAND SIDE OF THE LAPTOP SCREEEEN!

https://imgur.com/a/OiBV0dW

https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_QCoaAbRHMB704

I have that one and it covers the whole phone while also giving me the ability to use a case. It is reflective though but I got used to that quick.

I have an amFilm screen protector. I love it.

Google Pixel 2 XL Screen Protector Glass, amFilm Google Pixel 2 XL Tempered Glass Screen Protector 3D Curved with Dot Matrix for Google Pixel 2 XL 0.3mm (1-Pack) [UPDATED ADHESIVE VERSION] https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_v9JbAbXXYC57R

https://www.amazon.com/Protector-amFilm-Tempered-UPDATED-ADHESIVE/dp/B075WW69PS

As a case Horder with 12 cases so far. The official bumper case is my favorite, I have the nylon but plan on getting the karbon soon. 3rd party these 2 are my favorite

Encased OnePlus 7 Pro Case (Thin... https://www.amazon.com/dp/B07T3HNP55?ref=ppx_pop_mob_ap_share

Oneplus 7 Pro Case, Nillkin... https://www.amazon.com/dp/B07RSJP1H4?ref=ppx_pop_mob_ap_share

Screen protector as bonus: Oneplus 7 Pro Tempered Glass... https://www.amazon.com/dp/B07RRVMX2Z?ref=ppx_pop_mob_ap_share

Got a couple more in the mail on the way. Ones I like I keep and the ones I don't get returned. Prime so free shipping both ways so I'm always on the hunt.

I'm trying this first, it claims to resist fingerprints.

https://www.amazon.com/gp/product/B00DOPW5K6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

If that doesn't work, I'll try something like this https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0

I've put this one on my phone twice in the past ~2 years. First one saved my screen by absorbing a freak drop on a rock that hit the front of the screen.

Armor suit is my favorite after trying many. Overall, most the decent wet install shields are fantastic.

https://www.amazon.com/gp/aw/d/B01ACXSKAG/ref=mp_s_a_1_3?ie=UTF8&qid=1501349894&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=s7+edge+screen+protector&dpPl=1&dpID=51WtCcEuicL&ref=plSrch

For a case, the Spigen Tough Armor is really nice in the protection it gives, it your phone still looks sleek as hell.

https://www.amazon.com/gp/aw/s/ref=a9_asi_1?rh=i%3Aaps%2Ck%3As7+edge+spigen&keywords=s7+edge+spigen&ie=UTF8&qid=1501349942


As for the one you bought, go back to the store and demand your money back. Should be pretty easy. Tell them you were told by an associate that it'd work perfectly, and it was garbage. If it's a retailer like Wal-Mart, you'll definitely get it back. If you got it through a wireless store like verizon, well... it'll be tougher. You'll probably have to call them out on their shit, demand corporate numbers so you can complain, etc. (Maybe you'll get lucky though.)

Have you tried [this one] (https://www.amazon.com/gp/aw/d/B01N63XLQ6/ref=mp_s_a_1_3?ie=UTF8&qid=1510150301&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=glass+screen+protector+pixel+xl+spigen&dpPl=1&dpID=51OJh6AMGgL&ref=plSrch) by Spigen?

Alright, everyone keeps telling you to be careful, which I guess you already know, i'm going to give you the benefit of a doubt and say that maybe you cracked it once by accident, it happens, and the second time was because your phone screen was already weak from being replaced... I'll say it's no fault except bad luck. Shit happens.

My recommendation is just bite the bullet on spending a little more than you want to for phone protection, it will save so you much money in the long run. Screens are $200 - $300 dollars to replace, when you can just spend $75 now and protect it. So here's what i think will help.

• Get a case
  
• The one that is most reccomended after me spending DAYS going through threads and looking for solid cases is the Spigen Neo Hybrid ($13.99). Slim case with actual protection.
  
  
• Get a screen protector
  
• Also through my research is that the TG (Tempered Glass) protectors are all awful except for the Whitestone Dome ($44.99). Is a hard pill to swallow but it's the only glass that fits well, no reduction in sensitivity, and has full screen adhesive to keep from having those ugly rings around the edge of your screen or having those black bars. I reccommend this because you seem to crack your phone, rather than scratch it, this may save your screen a ton.
  
  
• If you reeeallyy don't want to swallow the $50 then most people just go with a wet applied film to just help from scratches and possibly a minor crack. Most people settle for the IQ Shield LIQuid Skin ($7.85). It's just a skin but it may save you in the end.
  
  
• Get a stand
  
• It will keep your phone more secure on your desk rather than having to deal with knocking it off when reaching for your glasses. Any cheap stand can work. I went with the Econstyle Stand ($7.99) because it's easy to move from my side table by my bed, to my desk by my compute. Just some extra security and ca keep your phone from getting any scratches from laying it face first on a hard surface.
  
  
• If you want to get a little luxury you could always get Samsungs Fast Charging Wireless Charger ($39.99) which has a stand included so you just set your phone down and it's charging, but that's just extra luxuries and isn't necessary.
  
  So you could spend a bit for some extra security that will save you time in the long run, or you can keep risking dropping your phone and breaking it. I bit the bullet and got the case, TG and stand and I haven't looked back. I actually dropped my phone first few days after having it, but thanks to my TG the damage was only there and it saved my screen completely.
  

Got this one with great reviews. I checked the reviews on fakespot and it says the reviews are 90% genuine. https://www.amazon.com/Protector-Maxboost-Tempered-Protectors-Accurate/dp/B073DLZWX7

I messed up the first one, but then I with the second figured out how to do it and get it to look perfect. No bubbles and a 99% perfect fit. Still have one extra since it’s a 3 pack.

I prefer to have a cutout for the camera area and I’ve been using iPhones and screen protectors since the iPhone 4S. I’ve never had any damage to the camera area. That way there aren’t any light reflections or etc messing with the light sensor, Face ID, and the selfie camera.

I would avoid this one because the cut out for the notch is wrong. https://www.amazon.com/iPhone-Protector-amFilm-Tempered-Installation/dp/B074ZNLM9J

Just buy screen protectors that come with an alignment tool and they end up costing about three bucks each.

https://www.amazon.com/gp/product/B073DLZWX7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I have a note 8.

I went without a screen protector or case for a while. I was totally fine with microscratches, I just don't want cracks. Well, eventually it cracked after one really really bad evening.

After getting a replacement with insurance, I know use a Spigen neo hybrid case and this protector

The only problem I've had is that I spilled some soda and a tiny bit got under the protector.

I hike a pretty rough trail about once a week. I haven't dropped it on the trail but I feel pretty confident about it. Ive dropped it at the office and at the house and obviously the phone and screen are totally fine.

EDIT: there is a small change in responsiveness. The only time I notice it is when I use the camera because I often stand it precariously in my desk and lightly tap it to start a timer. Now I have to brace it to tap it, or I use the pen, which can still just use a light tap.

https://www.amazon.com/gp/product/B074G1W2RC/

amFilm Galaxy Note 8 Screen Protector Glass

not the most premium out there, but honestly i regularly drop my note. it's nice when i break it to just shrug, whip out another $12 screen protector, and have it installed with 0 effort in 2 minutes.

everything about it is just so easy. adhesive is only on the edges, so you can't get bubbles or weird stuff. comes with a simple plastic frame to line it up during install so it's really unfuckuppable.

Already bought both of mine to prepare:

https://www.amazon.com/gp/product/B074CMMCZM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B074YXH9WX/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

WhiteStone Dome Galaxy Note 8 Glass Screen Protector.

Three days of heavy use

All day. Maybe even two. Note 3 with Zerolemon battery. There is no better battery made today.


http://www.amazon.com/dp/B00GYD782A/ref=cm_sw_r_udp_awd_-8lDub1WWK7M4

I was surprised not to see the one I use listed, but then realized most folks probably don't think of this when they think of cases even thought it is one.

I am referring specifically to the ZeroLemmon combination rugged case and 10000 mah battery:

http://www.amazon.com/gp/product/B00GYD782A

It gives you much of the same protection as the Otter Box while also letting you go days (literally days) without having to recharge. Reviews on the Amazon site are pretty positive as well. If you're going to spend $50-$60 on a case anyway...

It's not an external battery case. It's a brand new, larger battery with a case around the phone to hold it in.

Like this.

I used this and it is brilliant and I am not sure what the difference is?

http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8

Pretty much everyone recommends the Orzly tempered glass screen protector for the OPO. It's cut perfect, rounded corners, treated specially, etc.

diztronic ultra tpu. They're extra reinforced around the edges for impact. and an orzly screen protector in combination with the diztronic.

http://www.amazon.co.uk/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8


http://www.tpu-cases.com/index.php?main_page=product_info&cPath=104_105&products_id=418

I use the normal diztronic tpu and you get alot of protection without the bulk. These 2 protecters are a really good combination!:)

I've had mine for about 3 weeks now. Phone manufactured on September 15, my girlfriend's was on August 22... Nothing really to complain about. Battery life lasts far longer than my N5. Here are my settings and specs.

• Bootloader: unlocked
  
• ROM: CM11S (11.0-XNPH38R)
  
• Recovery: TWRP 2.8.1.0
  
• Kernel: Franco Kernel r30
  
• Root access: enabled, with SuperSU 2.16
  
• DPI: 380 (480 is stock)
  
• Theme: Gem Flat 2.7.2
  
• Launcher: Trebuchet (stock)
  
• Xposed framework: 2.6.1 with a bunch of cool modules
  
• Runtime: Dalvik
  
• Encryption: no
  
• Carrier: T-Mobile
  
• SP: Orzly tempered glass
  
• Case: TUDIA Ultra Slim Melody TPU (blue)

The clear case from Oneplus does not really protect the top or the bottom of the phone. It just protects the back and the side and it's slippery as hell.

I would go a diztronic case

Diztronic

and a tempered glass screen protector. The most popular one it seems is Orzly, although I've had issues with it, it seems to be the best one from reviews

Orzly

There is no cases out right now that will keep the sandstone look unless you get a clear case but it'll still make it look washed out. You can get an aluminum bumper case but it cases reception issues.

Get the Orzly

Definitely worth it. I actually prefer the feel of it over the stock screen.

I'm using the tempered glass protector from Orzly and it has a good oleophobic coating, seems much better than the screen on its own. Clarity is excellent and I've noticed no more glare than was present on the screen itself. I'd highly recommend it.

I did. Very pleased with the move. The extra battery life is a huge plus for me. Size is a little daunting at first but you get used to it. After using it for a couple weeks, the Nexus 5 seems tiny in comparison.

EDIT: I would suggest the ORLY tempered glass protector on Amazon. Fits really good on the phone and can barely tell its on. Sometimes I forget I even have a protector on it.

I believe this was the link posted the other day

The oleophobic coating can be sought and takes research to find it. Is that what you're asking? I only found one supplier, but I'm sure there are more. https://www.ebay.com/p/Fusso-Smartphone-Fingerprint-Oleophobic-Coating-Kit-3ml-W-cloth/1939117730?iid=111877001832&chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fp%25252FFusso-Smartphone-Fingerprint-Oleophobic-Coating-Kit-3ml-W-cloth%25252F1939117730%25253Fiid%25253D111877001832%252526chn%25253Dps%2526itemid%253D111877001832%2526targetid%253D411413051500%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9007795%2526poi%253D%2526campaignid%253D1425762668%2526adgroupid%253D54746042863%2526rlsatarget%253Dpla-411413051500%2526abcId%253D1139066%2526merchantid%253D112331818%2526pt%253D%2526gclid%253DCjwKCAjworfdBRA7EiwAKX9HeNuaZnwoVgnlJU0TmpN_jXlrztQmUGtyDXe9gL1FfHnVug1dDB0IYhoCMgwQAvD_BwE%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1683993695881%2526rvr_ts%253D1f2819f41660a99c01d7e116fff9e2ce BTW. That link is crazy long. I think the product is an import too. 😗

Found on Amazon too https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0

​

Or simply go nano glass liquid protector. My note 8 DID wear out coating on the home button area and smeared like you. look here https://www.spigen.com/products/screen-protector-glas-tr-nano-liquid

made by spigen as in cases.

If the sanitizing wipe contains any alcohol DO NOT RUB IT ON YOUR PHONE.

Almost every phone touch screen has an oleophobic coating on it to make your fingers slide nice and smooth. The alcohol will completely destroy this coating if you keep using it.

What you want to do is use a UV Lamp to kill any bacteria on the phone screen. Usually oleophobic coatings last about 2 years before they wear away from regular use. I replaced mine on my phone using this coating mix.

I've not done it myself, but you can just buy a bottle of the stuff and put a drop on the phone

I have the same problem though not quite as visible. I have to use a flashlight to be able to see it. IMO, this is an oleophobic coating issue. Get this product and apply it on the screen:
https://www.amazon.com/gp/aw/d/B00LKYW6M0/ref=mp_s_a_1_4?ie=UTF8&qid=1510806838&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=Anti+fingerprint+coating&dpPl=1&dpID=41qTTLBxymL&ref=plSrch

I have this one, it fits just right and since it doesn't go all the way to the edge it fits with most cases on the phone as well.

There are lots of TGSP on Amazon for the 6P, and they're all priced quite low too. I got the iVoler brand, but the PLESON brand was basically the same thing at the time I bought it. Also, I just found this when searching Amazon: http://www.amazon.com/iCarez-Tempered-Protector-Lifetime-Replacement/dp/B0168XT3E6/

As for cases, this is mine: http://www.amazon.com/Spigen-Hybrid-CUSHION-Crystal-bumper/dp/B016CBF3DE/
I have dropped my phone a few times already, and this case is a lifesaver.

I've always used this one:
iCarez [Tempered Glass] Screen Protector for Huawei Google Nexus 6P with Lifetime Replacement Warranty - Easy Install [1-Pack 9H 0.3MM 2.5D] Retail Packaging https://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_cp_apa_-jDOzb3CV1FBW
Lines up perfect for me and seems to have better finger print proofing than the actual screen ever did.

It's the screen protector that you want to be case friendly. https://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Replacements-Anti-Bubble/dp/B01ACXSKAG Like this. Not the case itself.

Plastic. Specifically, I used: ArmorSuit

I don't love it, I don't hate it. It works (Applied 2 days ago)

try armor suit - it's the only one that worked with the edge screen

the secret i found is using a hair dryer (on low, cool) to make it stick better to the edge when it is 'curing'

although it's a wet applicator, i like it a lot

(https://www.amazon.com/gp/product/B01ACXSKAG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1)

I use Armorsuit MilitaryShield its a wet application screen protector. ive had iton for 1 year now and it hasnt lifted


here is a link to it: https://www.amazon.com/gp/product/B01ACXSKAG/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Have a scout on YouTube for a specific video but you’ll see that it’s a piece of piss. Here’s an example


https://youtu.be/FgJRA_JryI8

Buy one of these

https://www.amazon.co.uk/dp/B01N2JIQR7/ref=cm_sw_r_cp_api_i_yL3jDbHBEF230

Plug it into your computer and recover files. In the scenario that the hard drive is just fine then you can even just get a new enclosure for it. Just get the right size - 2.5” or 3.5”

For the sake of £6 quid it’s worth having a go yourself.

Officially there is no way to do this.

Unofficially, I have done this in the past with a Tivo box. You would need to physically remove the hard drive from the DVR and mount it in your computer. Easy if you have a desktop, otherwise you can buy a cheap sata to USB connector on Amazon like this
https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7/ref=sr_1_3?


On the Tivo, the filesystem was Linux which Windows cannot natively read so you will need a utility like this one
https://www.eassos.com/how-to/access-Linux-partition-from-Window.php#Linux_reader_for_Windows

Without seeing the DVR drive, I can't tell you how to find the video file you want,although there is probably a date and time stamp in the filename.

Having found the file, your remaining problems are viewing/converting it to a useful format, and possibly defeating DRM on the file.

Pixel

Pixel XL

I have the Spigen Full Cover (https://www.amazon.com/Spigen-Google-Screen-Protector-Tempered/dp/B01N8S5R93/ref=sr_1_1?ie=UTF8&qid=1484849805&sr=8-1&keywords=Spigen+Full+Cover+Glass+Google+Pixel+Screen+Protector+with+Tempered+Glass+for+Google+Pixel+-+Black) With Ringke Fuision and it fits perfectly. I had a crappy Inskin tempered glass protector before and it had the halo effect, but the Spigen is perfect!

the spigen one is very good

https://www.amazon.com/Spigen-Protector-Friendly-Tempered-Hardness/dp/B01N8S5R93

This case.

This screen protector.

This Spigen Tempered Glass protector is the one I'm currently using on my black pixel. I've used 2 others since I've had this phone and this is by far the best. I really don't even notice it most of the time and it makes the bezels a darker black which looks really good. It is a little expensive for just one protector but it went on extremely easily and I think it is much worth it for the quality.

7 months in I am still fond of the Whitestone Dome glass.

Amazon: https://www.amazon.com/Protector-Glass-Dispersion-Dome-Whitestone/dp/B06ZZBPXMK/ref=cm_cr_arp_d_product_top?ie=UTF8

Most of the negative reviews seem to be people failing to make sure their phone was on a level service when they installed it.

My own install and review is below:

https://www.youtube.com/watch?v=b1pF_s9iw2o

At the time it was the only English language demo of the Whitestone Dome glass, now some more popular youtubers have reviews on it too.

But the protector is still going strong on my phone. It attracts a little bit of dirt/pocket lint around the edges, but it does not penetrate the protector at all.

The only one that looks promising is a relatively pricey one and a bit complicated, called Whitestone Dome. Uses a UV-activated bond. Check it out here:

Whitestone Dome glass, screen protector, [Full clear], [Full Cover], [Full Touch], [Full Fix], 3D glass, Edge to Edge (For Galaxy S8+) https://www.amazon.com/dp/B06ZZBPXMK/ref=cm_sw_r_cp_apa_uYjazb0J123Q1

This

I got the Diztronic case in matte black for my gold XS. I’ve owned diztronic cases for the iPhone 6, 6s, and 7. I’ve owned a couple of other cases but I somehow always go back to this brand. The matte blue used to look amazing with the phones with white faces, but this is the first time I’m opting for the matte black. Hoping the gold shows through the camera cutout.
https://www.amazon.com/iPhone-Diztronic-Matte-Slim-Fit-Flexible/dp/B075RDFQ1T

Max boost tempered glass screen protector
https://www.amazon.com/Maxboost-Protector-Tempered-Advanced-Accurate/dp/B073DLZWX7

Well then I'm doomed, I clean my phone on my pant leg sometimes, lol. I think I'll try this protector, good reviews. I've heard of glass protectors cracking easily, if it does this will be plan B. Anyone try the fabric case?

I got this one and I'm really happy with it.

This is the one i got. 2 pack. So far excellent. Doesn't affect screen touch responsiveness.


Galaxy Note 8 Screen Protector Glass (Full Screen Coverage)(Easy Installation Tray), amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass Screen Protector 2017¡­ https://www.amazon.com/dp/B074G1W2RC?ref=yo_pop_ma_swf

I would highly recommend this one:
https://www.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Specially if you dont want to spend 4 times as much on Whitestone and not to mention the mess it creates. Further there have been threads here and at XDA on how the screen still cracked at the corners even with Whitestone on.

I have been using this one from Phone launch in September, still going strong, no sensitivity issues and excellent customer service. This actually cover just about everything so no corner is exposed and surprisingly still fits well with a case.

One negative is its a smudge hell, but I guess that the case with all glass protectors.

EDIT: Also, another issue is that there is not cutout for front camera and other sensors(except earpiece), after some months of use I am noticing some dust under the front camera, it doesn't seem to affect the camera performance even though I frequently get messages to clean the lens whenever I use it.

Got this one for the wife that seems to think it's okay to constantly drop phones.
https://www.amazon.com/gp/product/B074G1W2RC
It gives the screen a slightly mirrored finish. touch sensitivity is 99.99% as good as a bare screen.
You will see rainbows and the dot matrix in bright sunlight but it's not too bothersome.

https://www.amazon.com/Anker-Protector-DoubleDefence-Technology-Alignment/dp/B074YXH9WX/ref=sr_1_3?ie=UTF8&qid=1512009606&sr=8-3&keywords=anker+screen+protector+iphone+x

Anker is a pretty good brand. It comes with the alignment frame as well. They have this version for iphone X/8/etc.etc..

I recently bought the bodyguardz one since I've been using them since the iphone 5. They are a bit pricey but they have a lifetime replacement.

Anker hasn't done me wrong. I went through 2 pure gears in a month ($30 each). I bought the Anker brand at 2 for $10. I got a few tiny air bubbles during installation and thought "fuck it, it'll break in a week and I'll install it right next time." That was in February and I'm still rocking the tiny air bubbles because this thing won't break.

https://www.amazon.com/dp/B074YXH9WX/ref=cm_sw_r_cp_api_qNTQBbBP8N405

yeah no protector has been installed on it.

i am having trouble finding that protector, it is out of stock on their site. What stores would carry it?

what about this one? https://www.amazon.com/dp/B075D1PR6Y/ref=pe_825000_114212990_TE_n_id

The Whitestone Dome Glass screen protector covers and fills in small scratches on the actual phone glass: It's not really a repair per se, but the full-coverage liquid adhesive (that you cure with a UV light) makes scratches invisible to the naked eye under the screen protector. You'll also be preventing more scratches and have some protection against the phone cracking from being dropped. I have one and love it, totally worth the cost but you need to watch the tutorials and be careful about installation. It's the best screen protector on the market right now for curved screens.

General consensus is Whitestone Dome Tempered Glass
https://www.amazon.com/Whitestone-Dome-Protector-Sensitivity-Anti-Fingerprint/dp/B075D1PR6Y

Second. I'm very happy with mine.
Google Pixel 2 XL Screen Protector Glass, amFilm Google Pixel 2 XL Tempered Glass Screen Protector 3D Curved with Dot Matrix for Google Pixel 2 XL 0.3 https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apap_duef7A44OQWfh

Hey everyone. I just recently got the amFilm curved TGSP. So far I like it. It does have a dot matrix, but it's only visible if you look for it. I would never notice it otherwise. I have no touch sensitivity issues either. The TGSP works great with my Fabric case as well! It was super easy to apply. I do have a small rainbow effect, but I've been seeing that if you give it a day or two, it goes away, so I will update with that. I feel comfortable recommending this, especially for the price. Here's a link.

Edit: rainbow effect is already gone less than an hour in. If you hold your phone at an angle under light with this TGSP on, you can see the dot matrix but I'm not too bothered by it. This is more personal preference though so take it with a grain of salt!

https://www.amazon.com/gp/aw/d/B075WW69PS/ref=mp_s_a_1_3?ie=UTF8&qid=1509660176&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=amfilm+pixel+2+xl&dpPl=1&dpID=51gXgBmTSmL&ref=plSrch

Sure, it's the Invision MX150.

My personal thoughts - Really, really nice arm. I wasn't expecting much for the price, but it's honestly flawless for the budget.

No wobble, lots of stability and huge range of motion even for that 29 Inch Ultrawide LG Monitor, I can put the monitor on it's side and it'll fit. I'm not sure if you'll get a larger monitor tilting on it's side though.

The only screen protector for any phone with a curved screen I personally can recommend is the [Whitestone Dome glass](http://www..com/ https://www.amazon.com/dp/B078JR1HTN/ref=cm_sw_r_cp_apa_2ecJAbSCNS396) It's an ordeal to get it on but it works phenomenally once it's on.

The problem with most screen protectors that curve is they only have adhesive around the curves or on the flat which cause the screen to lift or become less responsive. With the dome glass it uses a liquid adhesive and a uv light to cure the adhesive so there no air bubbles, and no loss in sesnitivty. I highly recommend watching a few YouTube videos of the isntallation process before attempting to put it on.

I have had mine for about 3 months now and no issues. The one on my mom's Galaxy so has been for like 8 months and still fantastic.

https://www.amazon.com/Dome-Glass-Protector-Dispersion-Whitestone/dp/B078JR1HTN

A bit pricey and you have to be really careful when installing but it worth its in the end.

Whitestone Dome. Hands down the best...

Google Pixel 2 XL Screen Protector Tempered Glass Shield, [Liquid Dispersion Tech] 2.5D Curved Full Coverage Dome Glass, Easy Install Kit and UV Light by Whitestone for Google Pixel 2 XL (2017) https://www.amazon.ca/dp/B078JR1HTN/ref=cm_sw_r_cp_apa_7zq3BbSG9G0QN

Amfilm tempered glass screen protector is about $10, fits perfectly, and has protected my phone from a face-down drop onto concrete (the protector broke at all 4 corners and the screen is perfect).

https://www.amazon.com/amFilm-Protector-Tempered-Adhesive-Installation/dp/B07PP9Q288/ref=sr_1_3?keywords=amfilm+s10e&qid=1567290354&s=gateway&sr=8-3

As for cases, I prefer slim and clear, so my recommendations are not what you're looking for. My favorite is the MNML case though.

I am using This one and is great.

It does leave a little gap around the edges of the screen but is perfect for a case like the otter box to grab the phone. I have no issues pulling tabs and menus from the sides with the screen protector.

It also come with a plastic alignment tool so you can get the installation right on the first try.

Pic

https://www.amazon.com/dp/B07RRVMX2Z?ref=ppx_pop_mob_ap_share

This is better than Whitestone in my opinion. It is cheaper and comes with 2 glass, while Whitestone only gives one. Whitestone gives you the guiding tray, but it's honestly super unnecessary

Yes sir, this is the one to get. Works great, install is pretty easy, and it comes with 2 protectors in case you fuck up the install. Watch a couple YouTube videos before doing the install and you'll be fine. Really enjoying this screen protector, one of the nicest I've ever used!

(I'm in no way affiliated with this company, just a very happy customer)

https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_other_apa_i_187NDbPRT1R6M

I've bought multiple of these tempered glass screen protectors on Amazon and use them along with a phone case. The screen still has the same feel and responsiveness.

They hold up really well against cracking during everyday use and normal drops and falls. The only minor problem I've had is that dust can occasionally work its way under the protector, leaving tiny little spots (but that's on a phone that is constantly in a very dusty environment). I dropped my phone screen side down on dirt/gravel and accidentally stepped on it. The screen protector shattered of course, but my phone was perfectly fine with not a scratch on the actual screen.

Edit: link to the correct phone model

The suggested other options on Amazon from your first link include one I've purchased.

https://www.amazon.ca/dp/B075WW69PS/ref=cm_sw_r_cp_awdb_t1_kCM3CbQJS17RY

I have only needed 2 so far and they work well. Current one is going almost a year.

I've blasted through so many Zagg invisashield ones, and they are a hassle to submit for a replacement, don't stick, and break easily. Stay the fuck away from those.

https://www.amazon.com/amFilm-Google-Screen-Protector-Tempered/dp/B075WW69PS/ref=sr_1_1?ie=UTF8&qid=1537931231&sr=8-1&keywords=amfilm+pixel+2+xl

It's far from perfect, but it's the first one that didn't fall off 3-5 days later..

I also use it with the rhinoshield crashguard, so case usage will vary.

I have bought a few of these and the fit is amazing. Only issue is you get a weird rainbow effect under the protector sometimes. But for the fit and price is worth it.

amFilm Google Pixel 2 XL... https://www.amazon.com/dp/B075WW69PS?ref=yo_pop_ma_swf

I have this one and a few of my friends have also bought it due to recommendation, we all love it: https://www.amazon.com/Protector-amFilm-Tempered-UPDATED-ADHESIVE/dp/B075WW69PS

I've been pretty happy with this one:

Google Pixel 2 XL Screen Protector Glass, amFilm Google Pixel 2 XL Tempered Glass Screen Protector 3D Curved with Dot Matrix for Google Pixel 2 XL 0.3mm (1-Pack) [UPDATED ADHESIVE VERSION] https://www.amazon.com/dp/B075WW69PS?ref=yo_pop_ma_swf

$12.99

No problems with a number of cases I've tried and very little pocket lint, nothing a puff of air won't knock out. There are probably better ones, this is the only one I've tried and I've felt no need to look further in the 2 months I've had it.

I use this one...

https://www.amazon.co.uk/Google-Screen-Protector-amFilm-Tempered/dp/B075WW69PS

Ignore the poor reviews, they were for the first version of it, the revised one is fine.

Yeah, this is the one I've got, 30 quid and it does the job. Only up to 27" inch though which is the monitor I'm using - https://www.amazon.co.uk/dp/B0765Y4CT5/

I never, ever rotate my monitor though, I gotta tell you. My rooms quite small and I can only push my chair back so far and playing a vert on a 27" monitor in landscape is plenty big enough for me.

I always wanted to try tate out, but it felt more like a fun novelty to me than something that was essential.

If you've got a bigger room and a smaller tv/monitor, it could make all the difference, but that was my experience.

For mounting, buy a VESA Desk mount which can usually rotate any monitor. This might open up your options rather than relying on a monitor that has a 180 swivel. I use DELL monitors for high quality colour grading and a Spyder X Pro for 6 monthly calibrations. If you want higher quality then you have Eizo Coloredge monitors. Their 24" models are 34cm and 36cm though.

Another possible option if space + quality are paramount is to see if you can use a small surface tablet as a secondary screen.

You could put the monitor on a stand that anchors to the desk and give yourself more overall room for activities. Not sure if it'll free up much horizontal space for the mouse but it should make your desk feel a bit roomier. Something like this, https://www.amazon.co.uk/Invision-Monitor-Arm-Height-Assisted-Adjustable/dp/B0765Y4CT5?ref_=fsclp_pl_dp_1

Yeah you can move it in any direction

https://www.amazon.co.uk/Invision-Monitor-Arm-Height-Assisted-Adjustable/dp/B0765Y4CT5/ref=mp_s_a_1_1?ie=UTF8&qid=1539182173&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=monitor+arm&psc=1

Great! I would suggest that you get either a gas spring monitor arm or a Vonhaus arm. I have tried many arms and had issues with almost all of them.

I have 2 of these arms
and one of these on my desk and they are fantastic, i tried about 4 other arms and they were all returned quickly for various reasons. Please do yourself a favour and avoid saving a few quid on the other stands like I tried.

Did you mean that you wanted to have the monitor float free so it’s just facing you but sits on the table? Cause if so then yeh there’s options you could get a gas monitor stand. Sorry if I misunderstood your first comment https://www.amazon.co.uk/dp/B0765Y4CT5

I think you're searching wrong item. Search for 'monitor arm' or 'desk monitor arm'

https://www.amazon.co.uk/gp/aw/d/B0765Y4CT5/ref=mp_s_a_1_3?ie=UTF8&qid=1524224657&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=Monitor+arm&dpPl=1&dpID=41lHgSXq0KL&ref=plSrch

This and this. Enjoy 👌

Normal with screen protectors on curved glass, because they only have glue on the sides. You would need one of those full screen uv glue kind of tempered glass to get rid of it. There are some expensive ones on Amazon: https://www.amazon.com/Dome-Glass-Protector-Dispersion-Whitestone/dp/B078JR1HTN but you can find them cheaper on ebay/alieexpress.

Here is THE one to get:
https://smile.amazon.com/dp/B078JR1HTN/ref=psdc_2407781011_rv_t1_B079HK4KXF

Surprised the obligatory, Whitestone Dome Glass hasn't been mentioned yet.
https://www.amazon.com/dp/B078JR1HTN/ref=cm_sw_r_cp_apa_i_jnz9AbTF0NHQ2)

I have the Dome Glass screen protector on mine with the defender at it works great. There is a hair of space between the screen protector and the case so dust can get in but overall, I am very happy with both products and well worth the money for a great phone.

https://www.amazon.com/gp/product/B078JR1HTN/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

I would suggest a Nillkin screen protector (you can find them on Aliexpress). They have a regular version that has a few millimeters gap from the edges, it's cheaper and fits even big bulky cases. They also have a full-coverage version with black edges for a more complete look.
Currently I have this on my phone: amFilm Glass Screen Protector for Galaxy S10e, Tempered Glass, Full Screen Adhesive, with Easy Installation Tray (Black) https://www.amazon.com/dp/B07PP9Q288/ref=cm_sw_r_cp_apa_i_-MaPDb4CDJJJM
Had for about 3 months now, still looks great like new, no scratches and does a geary job against fingerprints. Also comes with an installation tray for an easy install.

https://www.amazon.com/dp/B07PP9Q288/?coliid=I3MT4722ZVNQXJ&colid=3AC2TGZWM5BNM&psc=1&ref_=lv_ov_lig_dp_it

I use this tempered glass screen protector for the s10e and it is awesome. It is full adhesives and no dot matrix. I'm glad I was finally able to find one that works like it should.

amFilm Glass Screen Protector for... https://www.amazon.com/dp/B07PP9Q288?ref=ppx_pop_mob_ap_share

Yeah, the factory installed screen protector is surprisingly thin. I didn't realize how thin it was until I went to install my tempered glass screen protector.

I will say after browsing Reddit for s10e recommendations I narrowed it down to a couple results. If you're looking for a quality replacement I can recommend this amFilm Glass Screen Protector. The installation tray is pretty nifty and greatly improves on the ease of installation. There is a nice little 24-month warranty on it as well that you register on their website. I haven't had to make any claims, but with my typical usage I almost guarantee I will at some point over me owning this phone.

I also run fakespot on all purchases I make on Amazon and this one has an "A" rating which basically means they're not going out and purchasing a ton of fake reviews on their products.

I'm using this TGSP. 2 in the package, cheaper than Whitestone, fits great, with both my Ringke case and Poetic Affinity case. Application was easy, just take your time.

https://www.amazon.com/Tempered-Protector-Fingerprint-Transparent-Anti-Scratch/dp/B07RRVMX2Z/ref=pd_aw_sbs_107_3/133-0068031-8790344?_encoding=UTF8&pd_rd_i=B07RRVMX2Z&pd_rd_r=4579b568-99c2-11e9-941b-e1cf8bfdbb1f&pd_rd_w=6K3uS&pd_rd_wg=PV1VB&pf_rd_p=aae79475-6dc9-4a12-80e8-27b63108fa72&pf_rd_r=T4RX2PSDQAJ8SQWKNFKR&psc=1&refRID=T4RX2PSDQAJ8SQWKNFKR

Very affordable comparatively speaking. Very easy to install. Fingerprint sensor works great. Really like the Oleophibic coating. Fingerprints almost dissolve off the screen. Have had on for a month with no bubbles or separation. 2-pack is nice if you screw up, too. Taped up the buttons and speaker grills myself (the included tape isn't great).
https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_other_apa_i_6ha3DbHAATEMH

It comes with the ugly black case but they came out with some rugged cases that also will fit here

Look at ZeroLemon batteries, 10,000mAh battery with possibly the most robust case I've ever seen, less than $60.

If you're getting a decent phone for $60 I'm impressed!

http://www.amazon.com/Zerolemon-Zeroshock-Shockproof-Dustproof-Compatible/dp/B00GYD782A

With this mine lasts a few days with even heavy use. Disclaimer: phone is now a blunt force self-defense weapon.

The newly announced Raspberry Pi model A+ draws 220mA at idle.

http://makezine.com/2014/11/10/raspberry-pi-model-a-revealed-smaller-and-just-20/

> Without the extra components, the Raspberry Pi Model A+ draws about 30% less electrical current than the B+. After booting to the Raspbian login with a USB keyboard and mouse plugged in, the A+ drew about 220 milliamps whereas a B+ with the same setup draws about 310 milliamps.

According to the eLinux Wiki page on the Raspberry Pi camera module:

http://elinux.org/Rpi_Camera_Module

> Make sure the flex cable is inserted the correct way on both ends, and each connector has the locking tab engaged. The RPi + camera draws about 260 mA more current when recording video, than without the camera. The Model B is about 550 mA by itself, so camera use pushes it over 800 mA. Some power supplies, cables, and polyfuses may not maintain 5V onboard at this current load well enough for reliable operation. You can check this with a voltmeter across TP1 and TP2.[15][16]

So, 310 - 220 = 90mA improvement on the A+. That means the A+ recording video will consume about 720mA. That is 5*0.72 = 3.6W of energy required. For 8 hours, you will need a battery with a capacity of 3.6*8= 28.8Wh. A standard Li-Ion battery is 3.7V, so 28.8/3.7 = 7.73Ah = 7730mAh. Assume there's some conversion inefficiency, so we'll need somewhere around an 8000-10000mAh battery pack.

Here's one:

http://www.amazon.com/Compact-10000mAh-Portable-External-Technology/dp/B009USAJCC

Might be a bit too big.

Here's one for the Note 3:

http://www.amazon.com/Zerolemon-Zeroshock-Shockproof-Dustproof-Compatible/dp/B00GYD782A

I would think this would be a reasonable size battery to put into a camera that fits into a front pocket on an officer's uniform. The battery could also be worn on the belt similar to how mining headlamps work. It could use a smaller battery that is replaceable after say 4 hours of operation.

On top of this, the Raspberry Pi, no matter how optimized the new A+ may be, is still a full blown Linux computer running a full Linux stack. The camera interface runs through the hardware video encoder of the GPU which is similar to the ASIC a proper video-only camera would use, but all the losses from the application CPU pulling from the GPU, doing its own OS processing, and pushing to the SD card would be minimized by a streamlined ASIC. This could cut the power down a bit, but would be made up by the addition of an ADC and mic for audio. The camera could also be disabled when the officer is in his car, as the car already has its own cameras with a much larger battery.

http://www.amazon.com/dp/B00GYD782A/ref=cm_sw_r_udp_awd_mUXsub010J3H7

I have a note 3 with this extended battery and case, I charge my phone every 3 days and that's with brightness at max, power saver off and heavy usage.
http://www.amazon.com/Zerolemon-Zeroshock-Shockproof-Dustproof-Compatible/dp/B00GYD782A/ref=sr_1_1?ie=UTF8&qid=1412176812&sr=8-1&keywords=zero+lemon+note+4

The only way i'll upgrade to another phone is if they release a battery for it. I'm hoping that they'll make one for the Note 4.

It doesn't quite fit "inside" the phone.

It's big and heavy, but GPS and spotify all day with 45%+ charge at the end of the day.

https://www.amazon.com/gp/aw/d/B00GYD782A/ref=mp_s_a_1_1?ie=UTF8&qid=1469366163&sr=8-1&pi=SY200_QL40&keywords=zerolemon+note+3+10000mah&dpPl=1&dpID=41GZCtz9dCL&ref=plSrch

http://www.amazon.com/gp/aw/d/B00GYD782A?pc_redir=1413454925&robot_redir=1

Soon as this is dropping I'm buying 2 for note 4

10000 mah batteries

Group play is a Samsung app the let's you combine multiple.devices into a single display.

For.watching videos or certain games

/u/abow3

Amazon.co.uk

Edit: http://www.amazon.co.uk/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1406456290&sr=8-1&keywords=orzly+oneplus+one

This one on Amazon seems to be very popular.

The Tudia looks nice, but I hear that its design is shoddy.

I use the Diztronic case. It doesn't look very exciting, but its durable and has a good fit. The Bugdroid is made of the same material and should hold up pretty well.

I personally don't use screen protectors. Gorilla Glass makes them pretty unneccesary, in my experience. If you want one, Orzly tempered glass protectors are considered the best.

Well, many people seem to be more than happy with the Diztronic case, the ones in their accessories on the site are said to be a lot worse than this one.

And about screen protectors, I guess most people go with the Orzly?

But that will cost more than $15 in total, so I don't know.

Nope

Just get the Orzly screen protector. No bubbles and i actually like the feel of the phone better with it on.

This is by far the best tempered glass screen protector:

http://www.amazon.co.uk/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8

People have been having good luck with the ORZLY tempered protector. http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8#

The OnePlus One Wallet Case - GreatShield - $9.99
http://www.amazon.com/OnePlus-One-Wallet-Case-GreatShield/dp/B00N1WCMIM

GO US Universal Car Air Vent Phone Holder Mount - $1.90
http://www.ebay.com/itm/141336639957

Orzly Tempered Glass Protector - $14.99
http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_sc_1?s=wireless&ie=UTF8&qid=1413514184&sr=1-1-spell&keywords=orzley+one+plus+one

All of them works well

Cheaper on Amazon

No email yet :/ still says processing.

I got this glass one. This is my first "high-end" device so I figured $15 (+$10 case) isn't something I'd skimp on. The plastic ones have always felt cheap to the touch for me and offer less impact protection. When the glass shield breaks it (hopefully) dissapates and absorbs some/all the impact force.

I don't know for sure, but I imagine the import tax to be the same. You would be better off by going with [this one] (http://www.amazon.ca/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8) from Amazon in my opinion.

Well you're in luck because those accessories are only available on Amazon. http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1422019037&sr=8-1&keywords=orzly+oneplus

http://www.amazon.com/TUDIA-Slim-Fit-CYGEN-Protective-OnePlus/dp/B00NJBVHIG/ref=sr_1_2?ie=UTF8&qid=1422019053&sr=8-2&keywords=tudia+slim-fit+cygen+dual+layer+protective+case+for+oneplus+one

I just got a tempered glass screen protector to replace the plastic one that I ordered from OPPO.

http://www.amazon.com/gp/aw/d/B00KQKATH8?pc_redir=1414392560&robot_redir=1

Couldn't be happier with it. Better touch response and no bubbles behind the screen. Also a diztronic TPU case.

Diztronic and Orzly, dawg.

Grab an Orzly glass screen protector from Amazon. For $15 it fits great, is easy to install, and you can't even tell it's there.

http://www.amazon.com/gp/product/B00KQKATH8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I picked up mine from Amazon..

Edit - oh, and while you're at it, get yourself a good quality case for the mobile as well - I am using the Red TPU Case, but they recently put out an Ultra version, which has slightly beefed up corners for added protection ..

One of our friends here recently also reviewed it - http://redd.it/2mwh9q

Tudia Cygen Case http://www.amazon.com/gp/aw/d/B00O5QAI8O/ref=mp_s_a_1_1?qid=1422026605&sr=8-1

Orzly tempered glass screen protector http://www.amazon.com/gp/aw/d/B00KQKATH8/ref=mp_s_a_1_1?qid=1422026792&sr=8-1&dpPl=1&dpID=51GQd7MKPSL&ref=plSrch&pi=AC_SY200_QL40

I would say that there are some pretty good cases on amazon. I currently am running a Tudia Cygen case and an Orzly tempered glass screen protector. The case is durable and thin and the screen protector is really smooth and feels good. I recommend getting both.

I bought this one 4 months ago, and it still holds well. https://www.amazon.com/gp/aw/d/B00KQKATH8?sn=email&vs=1&vs=1

There are a lot of recommendations on the /r/oneplus forum (and newer ones than mine probably) but I use an Orzly tempered glass screen protector and a Tudia Melody TPU bumper case. I had bought a Diztronic TPU case at the recommendation of the aforementioned subreddit but I just found it cheap-feeling and ugly so I replaced it. But lots of other people like it so give it a shot.

This is the one I've used and had experience with:

https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0/ref=sr_1_2?ie=UTF8&qid=1484599614&sr=8-2&keywords=oleophobic+coating


Stay away from the Tekon/3M stuff.

Definitely looks like the Oleophobic coating has worn off. You can reapply it yourself if you'd like- about $20 on amazon, will last basically forever. Works on phones too. https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0

You can buy the oleophobic coating applied to phones, and apply it to your screen protector.

https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0

I've heard mixed things though.

Already love the original touchpad, but I don't know how the plastic will hold up over the next couple of months. Plus who doesn't love the touch of glass. Got mine here: https://www.protectionfilms24.com/custom-sizes.html

​

I find the prices really good, paid something like 13 EUR incl. shipping for 2 of these (wanted one spare in case I messed up... well I didn't ;-).

​

The exact measurements I used were: 63.5mm x 118.5mm with a 2mm radius on the edges. As you can see, I have a bit of space on the right/left side of the trackpad, so 119mm would probably be spot on. Right now I am applying an oleophobic coating every evening for the next 4 or 5 days so the surface is less prone to fingerprints and smudges, plus it makes it feel even smoother. Using this one here: https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0/ref=sr_1_1?crid=1BZETL2ULKAL3&keywords=oleophobic+coating&qid=1554233628&s=gateway&sprefix=oleophi%2Caps%2C285&sr=8-1

​

The reviews are mixed, but I find you really have to apply it a couple of times, making sure to let it sit for the night or at least 8 hours before applying it again. People tend to be very impatient, but this is key to getting the most out of your coating. You can also use this to restore the coating on your phones/tablets/touchscreens by the way, but please apply it at your own risk!

​

Edit: 13 EUR for 2 of these incl. shipping

Nexus 6 Screen Protector,Yootech Google Nexus 6 Tempered Glass Screen Protector,0.3mm 9H Hardness Featuring Anti-Scratch,Lifetime Warranty https://www.amazon.com/dp/B00NWL33OO/ref=cm_sw_r_other_awd_qWoRwbX8FYJP0

Just got to be careful when you put it on so that you don't get it too close to the sides otherwise it won't fully stick. The sides of the phone's glass are curved, this causing the potential for this issue.

here it's very good

https://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_cp_apa_OOuMxb7J0Q4TP

This is the one I'm using, and I've loved it so far. It fills out the entire face of the phone with small cutouts where they need to be. I don't really know how to describe it, but the edges of the glass are rounded and not as sharp as I've seen on other phones, you won't cut yourself dragging your fingers across the cutouts. And I haven't had to put it to the test, but it's apparently got a lifetime warranty, which is cool.

This one here. the case overlaps a very tiny bit on the corners but it isn't causing any issues. Got the case glass and phone during the christmas time sale and haven't had any issues with the glass coming up or anything

This one is only $8 shipped if you have Prime. And honestly only slightly more expensive than if you paid someone to go through the trouble of shipping you one.

I used it twice when I had my 6P. Worked great, got scratched after a while, cheap enough to just buy another and replace.

https://www.amazon.com/iCarez-Tempered-Protector-Lifetime-Replacement/dp/B0168XT3E6/ref=sr_1_3?ie=UTF8&qid=1536000078&sr=8-3&keywords=nexus+6p+screen+protector

A few things I recommend:

1. CD Car Mount. They seem to hold the phone better than air vent mounts
   
   
2. Power Bank
   
   
3. Tempered Glass Screen Protector
   
   
4. Spiggen Rugged Thin Case
   
   
5. USB Type A to Type C for laptop/other chargers

This screen protector https://www.amazon.com/gp/product/B0168XT3E6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Yea, I have this one.

http://www.amazon.com/gp/aw/d/B0168XT3E6/ref=mp_s_a_1_1?qid=1463792611&sr=8-1&pi=SY200_QL40&keywords=icarez+screen+protector+6p&dpPl=1&dpID=513RI87FQcL&ref=plSrch

Samsung Galaxy S7 Edge Screen Protector [Case Friendly], Armorsuit MilitaryShield w/ Lifetime Replacement - Anti-Bubble Ultra HD Premium Shield - Clear https://www.amazon.com/dp/B01ACXSKAG/ref=cm_sw_r_cp_apa_9zfwxbS2GBJKB

Here is the one I use. Never had any issues with it and my case not getting along.

ArmorSuit MilitaryShield - Samsung Galaxy S7 Edge Screen Protector [Case Friendly] w/ Lifetime Replacements - Anti-Bubble HD Screen Protector for S7 Edge - Clear https://www.amazon.com/dp/B01ACXSKAG?ref=yo_pop_ma_swf

Yes i'm using one of these.

https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7/ref=sr_1_3?crid=1DH9L5KRHNEK0&keywords=usb+sata+adapter&qid=1564491684&s=gateway&sprefix=usb+sata%2Caps%2C139&sr=8-3

I use it as an SSD for games. There's a 15-20% decrease in read/write speeds compared to being plugged into a mobo sata, but I haven't noticed the difference and it hasn't impacted game performance at all.

if you have a desktop you could connect the HDD direct to the motherboard if you have spare power and sata cable

or you could use a USB > sata adapter or USB disk enclosure to connect the HDD externally

If only the screen and keyboard are broken, you can use an external display and keyboard to use the computer.

Now, if the computer itself is broken, but the hard drive is not, you can open the laptop by removing some screws and remove the hard drive. The rectangular part in the bottom left corner of this picture is the hard drive.

You can then get either put that hard drive into another laptop or buy a USB to SATA adapter (example) to plug it to a computer with USB.

Started on it. So far still need to find the actual dimensions of the mounting points on a 3.5", but hey... Tomorrow's a day too.

https://imgur.com/a/cST6Wfj

I have made the decision simply to leave the back area around the data connectors open, to try and fit as many different convertors as possible. Hopefully something like this should work: https://www.amazon.co.uk/dp/B01N2JIQR7/ref=cm_sw_r_cp_apa_i_RELKDbKER3B8A

If it's a Windows machine and you want to replace a HDD with an SSD... I have done this with the laptop of my GF and my mom's laptop. I used Macrium Reflect (https://www.macrium.com/reflectfree) to copy one disk to the SSD. You'll need an adapter so you can attach the SSD to your PC without removing the HDD. Something like this: https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7

Macrium Reflect is quite good and I never had troubles with it for all the PC's I used it for. It makes a bit for bit copy of your drive. Be careful with the partitions though, those can be tricky.

I've done lots of hard drive removals. what model of Lenovo is it?

I've had lots of luck googling the laptop model and teardown. once you've got the drive out, you'll want to plug it into the new laptop.

https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives/dp/B01N2JIQR7/ref=sr_1_3?ie=UTF8&qid=1502610079&sr=8-3&keywords=sata+USB

I've used this type of thing on the past with success. Other option is to get the shop you are buying the new laptop from to copy over your data as part of the service.

Spigen Full Cover Glass Google Pixel XL Screen Protector with Tempered Glass for Google Pixel XL- Black https://www.amazon.ca/dp/B01N63XLQ6/ref=cm_sw_r_cp_apa_6cLFyb7PNC01H

I have heard nothing but good things about the Spigen full coverage protectors. They're inexpensive, try one and see if it works out for you.

https://www.amazon.com/Spigen-Protector-Tempered-Coverage-Hardness/dp/B01N63XLQ6/ref=sr_1_1?ie=UTF8&qid=1495140113&sr=8-1&keywords=spigen+pixel+xl+tempered+glass

Also, I highly recommend pairing the phone with the caseology parallax case and spigen full coverage screen protector. The spigen goes edge to edge and doesn't cutoff any of the lcd. Have not experienced any lifting or rainbowing due to the 2.5d glass design on the pixel. Also the screen protector goes right up to the edge of the case and leaves virtually no gap.

Google Pixel XL Case, Caseology [Parallax Series] Modern Slim Geometric Design [Black] [Textured Grip] for Google Pixel XL (2016) https://www.amazon.com/dp/B01M99JRPN/ref=cm_sw_r_other_apa_0K5dzbCW1Q369
Spigen Google Pixel XL Screen Protector Tempered Glass / Full Coverage / 9H Hardness / Case Friendly for Google Pixel - Black https://www.amazon.com/dp/B01N63XLQ6/ref=cm_sw_r_other_apa_0L5dzbGA8AK49

I would definitely go with a Spigen screen protector if you're going to go with one. It covers the whole screen, and also works with the Caseology Parallax. I have the same case, with the Spigen screen protector here's my setup: https://imgur.com/gallery/Szvz1 the screen had a bubble but it's normal and went away in a few days. I've gotta say it's been my favorite screen protector I've had. Here's the screen protector: https://www.amazon.com/dp/B01N63XLQ6/ref=cm_sw_r_cp_apa_7XVLybWQ5M6QT

Do you bubbles disappear when you put pressure on them and then re-appear after you remove pressure? If so, then the curvature of the screen is your problem. I used these on the Pixel's that my GF and I both use. No bubbles, perfect fit. I trusted the online review of other screen protectors and it really paid off.

They make them for the Pixel XL as well.

It's the Spigen Glastr

This is the screen protector I got and it fits perfect and makes the phone look good.

Spigen

https://www.amazon.ca/gp/product/B01N63XLQ6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I used this one; unfortunately I only have my XL for a short period of time so I cannot speak to long-term use. I did like the quality of it though.

https://smile.amazon.com/gp/product/B01N63XLQ6/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

I bought these:
Screen protector
Case

Had them since Oct 2017 and still going great. Case is tight, not stretched. I cracked one screen protector with my keys and bought another.

Only issue I've had with the screen protector is it doesn't adhere to the screen, it just sticks around the edge.. so I get dust under it occasionally. But, it's also easy to pull off (intentionally mind you) and clean, so you can re-apply it and it works great again. Looks great.

I highly recommend a screen protector, there's one from spigen that just came out and I really like the look of and it covers the entire screen. Best part is, right now it's only $9 as compared to $30

Spigen Full Cover Glass Google Pixel Screen Protector with Tempered Glass for Google Pixel - Quite Black https://www.amazon.com/dp/B01N8S5R93/ref=cm_sw_r_cp_apa_sMIGyb6WC4GG7

https://www.amazon.com/dp/B01N8S5R93

Cannot recommend this screen protector enough: https://www.amazon.com/dp/B01N8S5R93/ref=cm_sw_r_cp_apap_Gl7pBXIggHwms

Love this case, might not be what you're looking for, but it's cheap and a great option: https://www.amazon.com/dp/B01LXL2O9K/ref=cm_sw_r_cp_apap_S8vmPbkaHHima

No, works just fine. There's a clear section for the camera (covered) but cutouts for the speaker on top. This is the one: https://www.amazon.com/Spigen-Protector-Tempered-Protection-Friendly/dp/B01N8S5R93

My notes and advice on screen protectors.

1. Your screen can be scratched by sand in your pocket (Micro scratches).
   
2. All glue tempered glass screen protectors are garbage (Low touch sensitivity and can easily fall off. The touch sensitivity issue is caused by the glue raising the protector from the screen).
   
3. The plastic ones feel gross.
   
4. I've tried DIY loca, it can be a hit or miss depending on how careful you are. Please do your research before attempting this.
   
5. Whitestone Dome is amazing but ridiculously expensive.
   
6. I've found that full adhesive screen protectors can somewhat protect your device from a fall. I've personally had Whitestone Dome fall face first, protector cracked, phone was in perfect condition. Although I'm not certain if the phone would have cracked..
   
7. Use this. I've been using it for a month and it works flawlessly. It's also only $12.99 compared to Whitestone Domes $40+.
   
   Note - My recommendation is a full adhesive LOCA screen protector. You must be careful when installing it. You've only got one shot. Unless you buy like 5.
   
   ​
   
   ​
   
   ​

Or on amazon prime Whitestone Dome glass, Galaxy S8+ glass screen protector, [Full clear], [Full Cover], [Full Touch], 3D glass, Edge to Edge https://www.amazon.com/dp/B06ZZBPXMK/ref=cm_sw_r_cp_apa_p46-ybD7ZAA7P

Whitestone Dome, $45. The adhesive covers the screen edge to edge. It's currently out of stock on Amazon though but they said they should have more by the end of the week: https://amazon.com/gp/product/B06ZZBPXMK

Here's a 17+ page discussion on it if you want to know more about it: https://forum.xda-developers.com/galaxy-s8/accessories/whitestone-dome-glass-screen-protector-t3596124

so far so good for this combo:

• case
  
• screen protector
  
• charger

Sure. This is the one I got. Super easy to put on too. It’s actually kind of fun watching it adhere itself to the screen.

iPhone X Screen Protector, Maxboost (Clear, 3 Packs)https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_xDVhAb0MZ6DE9

For those interested, these tempered glass protectors are amazing.

Got mine in today and application was streamlined, quick, and perfect.

What’s more, they go around the notch and wouldn’t end up causing any kind of issues with the sensor array.

I bought this one on amazon for $10 and it comes with an alignment tool which is nifty.

I didn’t get it 100% perfect but I think it’s more because I wasn’t paying attention to what I was doing...

I’ve used cheap and expensive protectors and I haven’t noticed any differences. I’m currently using a Maxboost protector that’s been on my XS since last November and it works flawlessly.

Maxboost Screen Protector for... https://www.amazon.com/dp/B073DLZWX7?ref=ppx_pop_mob_ap_share

These screen protectors are a bit more expensive upfront, but I got codes for a lifetime warranty, as well as for a free screen protector for my next phone when I decide to upgrade. Works great too. Had a frame guide for putting it on with all the tools you need and theres 3 of them so if there’s anything at all wrong, you have plenty more.

No not a case but a screen protector.

​

https://www.amazon.com/Maxboost-Protector-Tempered-Advanced-Accurate/dp/B073DLZWX7/ref=zg_bs_2407781011_3?_encoding=UTF8&psc=1&refRID=VMMQAP7S71VWJFRJ9T29

​

Like this one for example. They will break but your screen will be fine!

I bought this one and really like it. It was also the easiest screen protector I’ve ever had to put on. It comes with a frame that fits around your phone that allows you to easily perfectly align the protector. Also didn’t have any bubbles or anything.

I got these and am happy. No weird rainbow effect. No distortion. Not bad with dust. And come with easy install frame for lining up

iPhone X Screen Protector, Maxboost (Clear, 3 Packs) iPhone X Tempered Glass Screen Protectors [3D Touch] 0.25mm Screen Protector Glass for Apple iPhoneX 2017 work with most case 99% Touch Accurate https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_BixUAbQ9JKTX0

iPhone X Screen Protector, Maxboost (Clear, 3 Packs) iPhone X Tempered Glass Screen Protectors [3D Touch] 0.25mm Screen Protector Glass for Apple iPhoneX 2017 work with most case 99% Touch Accurate https://www.amazon.com/dp/B073DLZWX7?ref=yo_pop_ma_swf

I gave up on the tempered glass options and went with a film one I had on my Galaxy S7 and liked. I went with the IQShield LiquidSkin and it's a great fit. It's much better with finger prints compared to the power support junk too.

you don't want a plastic protector that doesn't apply with water.
those are really really old, I used those on PDAs back in the day.

I had https://www.amazon.com/Protector-LiQuidSkin-Case-friendly-Anti-Bubble-Anti-Scratch/dp/B073RV6PQD/ref=pd_bxgy_3?_encoding=UTF8&pd_rd_i=B073RV6PQD&pd_rd_r=525d0859-cd95-11e8-9a8b-017d633f01ef&pd_rd_w=QEFiU&pd_rd_wg=OibVn&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=6725dbd6-9917-451d-beba-16af7874e407&pf_rd_r=X3X18G6Q79W11QDK84JK&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=X3X18G6Q79W11QDK84JK on my p2xl.

when you apply it, you need to let it sit and dry for like a day. Do it before you go to bed, let it sit overnight, and be super careful with your phone the next day (I would avoid pockets).

All the screen protectors have pretty bad reviews on Amazon. The challenge is the curved screen. A lot of the glass screen protectors only adhere at the edges. I've been fairly happy with the IQ shield. If you do get this one, then read the directions/watch the video carefully.

Google Pixel 2 XL Screen Protector [Not Glass][2-Pack], IQ Shield LiQuidSkin Full Coverage Screen Protector for Google Pixel 2 XL [Case-friendly][HD C https://www.amazon.com/dp/B073RV6PQD?ref=yo_pop_ma_swf

I just got a clear protector (case friendly) from IQ Shield, and it's great. I tried a matte protector (full screen coverage) first, but I didn't have the patience to do the edges and ended up going with this one.

The protector itself is still larger than the actual display area and the borders work great with the Spigen Thin Fit case (I got it because of the cutout for a magnetic mount plate) which I'm also using. It's not a tempered glass protector, so you do get that plastic-y feel and small amount of the orange peel look, but that's just a fact of life with the wet-apply, plastic protectors.

I bought two but have only installed IQ Shield. I was doubtful about IQ shield but it's damn near perfect. It's not a tempered glass but feels really smooth, I'm not sure you'd know the difference. When/if you install it...watch their instructions and if you still have a few bubble areas, let it cure over night....it should work those out and look great afterwards. Mine looked yucky at first but the next day, wow. The other one I bought is tempered but not sure if I'll even need to put it on. Here are the two links.....

https://www.amazon.com/gp/product/B073RV6PQD/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0749HTBLL/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Good luck to you - I went with the IQ Shield - works decently but do have 2 tiny bubbles near front facing camera. Not bad though as they don't really bother me. At about $8 it was worth.

https://www.amazon.com/gp/product/B073RV6PQD/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

This is the screen protector i am using and it is working great so far. It is $11 on amazon: Galaxy Note 8 Screen Protector Glass (Full Screen Coverage)(Easy Installation Tray), amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass Screen Protector 2017 https://www.amazon.com/dp/B074G1W2RC?ref=yo_pop_ma_swf

I personally think the S-View cases from Samsung are an underrated accessory. They allow you to control media etc without even opening up the phone, and just look pretty sleek in general.

For actual screen protectors, it's a challenge because of the curved screen. I've tried a few, and have been very satisfied with amfilm - they're the most affordable, and if you register immediately you get upto 3 replacements free for damage. They do have a dot matrix pattern and have a rainbow effect under certain lighting conditions, but I havent found either to be a truly big enough hassle.

There are two that work fine that are cheap for the Note 8 which if you search here you will see are recommended. I have this one below and it works great. No loss of sensitivity. Does pick up fingerprints though.

https://www.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Couple of my pics.

https://i.imgur.com/HS9dQF4.jpg

https://i.imgur.com/5zHLvwR.jpg

Here is another people recommend.

https://www.amazon.com/Tempered-Protector-Coverage-Installation-OTAO/dp/B077MJXNJP/ref=sr_1_23?s=wireless&ie=UTF8&qid=1520984097&sr=1-23&keywords=note+8+screen+protector+tempered+glass#customerReviews

I got this one, and I really like it.

Galaxy Note 8 Screen Protector Glass (Full Screen Coverage)(Easy Installation Tray), amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass Screen Protector 2017 https://www.amazon.com/dp/B074G1W2RC/ref=cm_sw_r_cp_apa_C1CUzbFXGSGWC

https://www.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

My wife and I both have this one. Works well, installs easily, and it took less than 5 days for us to get a new one free under warranty when my wife's broke.

I like this one. It comes with a plastic thing that makes sure you get it aligned properly. I am on my second one now as I dropped my phone and cracked it last week.

After going though a couple of Whitestone protectors I gave up on them. They seem really bad about lifting which causes bubbles. Anyway I started running these amFilm protectors a while back and have been quite happy with them. They aren't perfect(there is some reduced touch sensitivity, especially on the edges), but for the price I'll keep using them. The oleophobic coating is pretty good when they are new, but it does wear off after a while. I'll probably be replacing mine pretty soon just because the coating has worn off, but at $10 each it's not a big deal.

There's a little distortion at the edges, I think due to the rounded edges. But the protector does slightly extend beyond the edges of the display, so it doesn't obstruct the image.

I'm not sure of the exact thickness, but they're slightly thicker than the Belkin ones. I'd say that's definitely a good thing because the Belkin TrueClear Pro Ultra (Corning version) is too thin, to the extent that it cracks easily with small impacts.

https://www.amazon.co.uk/Anker-Protector-DoubleDefence-Technology-Alignment/dp/B074YXH9WX/ref=sr_1_1?ie=UTF8&qid=1517700339&sr=8-1&keywords=anker+karapax+iphone+x

It's this one https://www.amazon.co.uk/Anker-Protector-DoubleDefence-Technology-Alignment/dp/B074YXH9WX/ref=sr_1_3?ie=UTF8&qid=1539092901&sr=8-3&keywords=anker+screen+protector

The one I bought:
www.amazon.co.uk/gp/product/B074YXH9WX

Im from the UK and I bought these screen protectors

https://www.amazon.co.uk/gp/product/B074YXH9WX/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I also bought 2 wireless chargers and a fast charger and im so hype and ready for this phone!!!

if you want a glass protector only whitestone is good enough, even if it's not cheap.
save your money and don't buy any other glass protector, they are all the same and don't get fooled by amazon reviews. 90% at this time are fake.
https://www.amazon.com/Whitestone-Dome-Protector-Sensitivity-Anti-Fingerprint/dp/B075D1PR6Y/

if tpu/pet i would go for dry installation. the wet ones are too thin and fexible so it will not be very good with the s pen.
they are cheap but probably still not very good.

There is only one good glass protector, here. It takes patience to put on and can be easily messed up if you don't pay attention.

Otherwise pick from various plastic film protectors like Skinomi.

FWIW, looks exactly like this product on Amazon for $13
https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_q0iJAbT19N777

Using one now. Has the dot matrix but doesn't bother me. My biggest complaint is dust/pocket lint has seeped underneath after installation.

Well, it's a fair bit thicker than the original battery. But I purposely went for the Note 3 because it was huge; I don't care about thickness. It's pretty damn awesome.

Here's the Amazon link (not a referral link):

http://www.amazon.com/Zerolemon-Zeroshock-Shockproof-Dustproof-Compatible/dp/B00GYD782A

I'm not familiar with that particular product, but I did buy this battery about 2 months ago for my Note 3. It is also 10,000 mAh and I recommend it 100%. I'm averaging about 3-5 days on a charge depending on amount of time roaming since I don't really get service at all where I work.

There is, but you need to put a new back on it that makes it absolutely huge.

http://www.amazon.com/Zerolemon-Zeroshock-Shockproof-Dustproof-Compatible/dp/B00GYD782A

Since the battery in the Note 3 is removable I would just carry a spare if you want longer battery life. Far more compact solution.

Galaxy Note 3 + 10,000mAh extended battery (3x the size of the standard battery which is already really good)

He most likely has this.

Most people are getting 3-4 days of heavy use. 5+ days of normal use.

http://www.amazon.com/dp/B00GYD782A/ref=cm_sw_r_udp_awd_B1Pyub1WQT97X

Link to product

I bought one of these about 6 months ago https://www.amazon.com/dp/B00GYD782A/ref=cm_sw_r_other_awd_TIWMwbW5YX69Q it just about doubles the thickness of the phone and adds a bit of weight, but the trade off is I can go 2-3 days without charging and I am always on my phone.

The added thickness is a dealbreaker for most people, but this 10,000 mah zero lemon case pretty much triples the already decent battery life. I run 100% brightness with data/wifi/gps/bluetooth on all day, and lasts me a minimum of 48 hours (and I use it heavily).

I also ran the phone on an unpowered MHL->HDMI adapter using a bluetooth gamepad to play games on a tv, and it ran for over 10 hours straight.

Bit of a mini-rant, but the freedom of never having to worry about turning down brightness/etc really can't be understated.

I bought one of these http://www.amazon.com/gp/aw/d/B00GYD782A and solved all my problems. I think external batteries are silly.

And that's why I buy devices with removable batteries so I can buy things like [this] (http://www.amazon.com/gp/aw/d/B00GYD782A/ref=mp_s_a_1_1?qid=1396715287&sr=1-1&pi=SY200_QL40)

You need to check Amazon for an extended battery. I don't know how to post pix, but my battery life, with HEAVY downloads and constant Bluetooth (smart watch & earpiece) is
36% remaining, with 23 hours, 7 minutes and 6 seconds. This is just a random day for me..

http://www.amazon.com/gp/aw/d/B00GYD782A?pc_redir=1409283651&robot_redir=1

I'm just looking into that (this is the right one, right?), is it a problem that there doesn't seem to be a cutout for the front facing camera?

Unfortunately this product is not yet available in the US, so you would have to import it from Amazon UK. Alternatively Orzly has a tempered glass protector available for OnePlus One in the States: http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_2?ie=UTF8&qid=1405953937&sr=8-2&keywords=orzly

[Case] Adore June Classic case for ONEPLUS ONE - original Cordura® - black | £8.96 via Amazon.co.uk

I can't speak for the delivery time due to having Amazon Prime (next day delivery) but the case itself is pretty nice. Fabric on the outside while having the inner layer being made of a soft fleece. The case was far too tight to comfortably use, needing two hands to squeeze the phone into and out of the case. It seems to be loosening up after the few days iv had it so it appears to be getting better.

Recommendation: Haven't decided

****

[Protector] Orzly® - OnePlus ONE Premium Tempered Glass | £11.88 via Amazon.co.uk

Quality protector, feels nice and doesn't appear to diminish the screen or touch of the device. However, it does not fit perfectly. It appears to be cut slightly smaller that the screen of the Oneplus. The left edge will fit perfectly but the right will have a small gap. Its not noticeable unless you look closely but again, its not perfect.

Recommendation: Yes

If I had to guess, this is the one you want from Amazon.de

http://www.amazon.de/Orzly%C2%AE-Displayschutzfolie-Geh%C3%A4rtetem-Protector-SmartPhone/dp/B00KQKATH8

http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1411184156&sr=8-1&keywords=orzly+oneplus

all you need.

I use these

Glass Screen Protector:

Orzly® - OnePlus ONE Premium Tempered Glass 0.24mm
http://www.amazon.com/dp/B00KQKATH8/ref=cm_sw_r_udp_awd_aIUAub12SBZT0

Thin Sturdy Rubber Phone Case:

Diztronic Full Matte Black Flexible TPU Case for OnePlus One
http://www.amazon.com/dp/B00MBS1NA0/ref=cm_sw_r_udp_awd_zJUAub0T60SSN

OK, so maybe we haven't guess it yet. How about this?

http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1415395185&sr=8-1&keywords=oneplus+one+accessories

I got the [Diztronics TPU Case] (http://www.amazon.com/Diztronic-Matte-Black-Flexible-OnePlus/dp/B00MBS1NA0) and a [Orzly Tempered Glass Screen Protector] (http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?s=wireless&ie=UTF8&qid=1413548755&sr=1-1&keywords=orzly+oneplus+one).

Gets the job done!

I've never used a matte screen protector on a phone so I can't comment on it. I'd be wary of how much it might degrade image quality.

Also, it's just a plain PET plastic screen protector. You can get a 3 pack of them on Amazon for the same price in glossy, matte, or UV coated.

The smarter chocie is to get a nice tempered glass screen protector

http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8

Amazon: http://www.amazon.com/dp/B00KQKATH8

Seems that the price may have gone up though. I snagged mine for around $12

http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1412174745&sr=8-1&keywords=orzly+oneplus+one

yes i'm using an Orzly tempered glass (http://www.amazon.co.uk/dp/B00KQKATH8). it is a little pricey but it does the job.

$12.99 in US with Prime

Lets start off with cases. Below is a link to an article about the top 10 OnePlus One cases. You may also want to look into the tempered glass protection options. Some people claim the tempered glass is amazing, while others believe it won't protect your screen. A lot of factors play into whether your screen will crack when dropped, so sometimes you get lucky and other times you don't.

-------

http://www.digitaltrends.com/mobile/best-oneplus-one-cases/

http://www.amazon.com/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8

Get a glass screen protector and you won't even know he difference. Screens can scratch easily on the smallest of things (like sand). It depends on which protector you get, but most people seem to like the Orzly

I am not sure. I haven't heard of anything about their Oem screen protector.

If you are interested in the other one here's a link

http://www.amazon.com/Orzly®-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_1?ie=UTF8&qid=1421939787&sr=8-1&keywords=orzly+oneplus+one

It got bad reviews here in India.

http://www.amazon.in/Orzly%C2%AE-OnePlus-Tempered-Protective-Protector/dp/B00KQKATH8

What do you think about it?

For me, this phone is perfect. I cracked my screen tho and I dont believe this phone really uses gorilla glass. If you get the OPO get the Tempered Glass and good case.

Battery life is simply amazing and it charges super fast.

Thanks for pics! I am inclined towards clear case. For screen protection, I would like Orgly but tough to get in india

Right now I'm using this tank of a case with this screen protector

Really? But... It's so cheap on Amazon.
http://www.amazon.com/gp/product/B00KQKATH8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Also, I heard Phantom Glass is really good.
http://www.phantomglasscanada.com/

Well I'm gonna order [this one] (https://www.amazon.co.uk/gp/product/B00KQKATH8/ref=ox_sc_act_image_2?ie=UTF8&psc=1&smid=A2PA6SVKIURG13). It has good reviews. You can probably find the same or similar in other stores, if uk is not for you.

I strongly recommend this screen protector.

http://www.amazon.com/gp/aw/d/B00KQKATH8

Tampered glass, .24mm thick, easiest installation of my life.

http://www.amazon.com/gp/aw/d/B00KQKATH8?pc_redir=1413339034&robot_redir=1
Dont like cases well at least keep that sexy screen safe with this glass screen protector!

OnePlus Tech hasn't released any official screen protectors, but there are a few made by third parties, such as:

http://www.amazon.com/gp/product/B00KQKATH8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

It sticks out ever so slightly. Hard to notice. I have a bumper on my phone too, so I can't actually notice it...

But my phone is uber protected with low cost and almost no inconvenience. Still looks great and low profile. If I sell mine, I can sell it as 'like new' which I did with my Nexus 5 - same protection.

Protector:

http://www.amazon.com/gp/product/B00KQKATH8/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&linkCode=as2

Bumper:

http://www.amazon.com/gp/product/B00MBS1NA0/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&linkCode=as2

I put one of these and one of these and so far I'm pretty happy. I dropped an 80lb dumbbell on mine and it only caused a small crack in the phone's glass (not the glass protector). It was so small I didn't notice it till hours later, I could of sworn the phone was going to be destroyed.

Yeah, I've had my phone since late January. I've gone through 2 now. I don't have a case, usually these things crack in the corner and I get rid of them.

I've been getting the Orzly Tempered Glass 0.24mm Protective Screen Protector

I've decided to go without for now.

Maybe this can help you with oleophobic coat

Crystal Armor Fusso Cell Phone Fingerprint Oleophobic Coating Kit 3ml from Japan https://www.amazon.co.uk/dp/B00LKYW6M0/ref=cm_sw_r_cp_apa_3bWJBbNW76JA0

Crystal Armor Fusso Cell Phone Fingerprint Oleophobic Coating Kit 3ml from Japan https://www.amazon.com/dp/B00LKYW6M0/ref=cm_sw_r_other_apa_INZnzbKX7BSF1

https://www.amazon.com/dp/B00LKYW6M0/ You can buy your own and reapply for relatively cheap. It's normal for it to wear with time. 2 months is a bit short though and I would expect that it was misapplied by the factory. But I don't think that it's worth going without a phone for weeks for something you can do yourself.

https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0

Agree, seen this many times, we have has success re-applying using products similar to this:

https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0/ref=sr_1_1?keywords=oleophobic+coating&qid=1571671048&sr=8-1

Or stick a screen protector on :)

Just google feedbacks about this product. Or here https://www.amazon.com/Crystal-Armor-Fingerprint-Oleophobic-Coating/dp/B00LKYW6M0/

https://www.amazon.com/gp/aw/d/B00LKYW6M0/ref=mp_s_a_1_3?ie=UTF8&qid=1526037106&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=oleophobic+coating&dpPl=1&dpID=41qTTLBxymL&ref=plSrch


There is some stuff that says that it will restore the costing on Amazon.

Yeah np. I forgot to link it; http://www.amazon.com/Yootech%C2%AE-Motorola-Tempered-Protector-Superslim/dp/B00NWL33OO

I just bought it huehue. Also got free amazon prime for 30 days so 2 day shipping. YUS

Try this tempered glass screen protector.

Link

I've had it now 2 months without issue. I fudged and applied it ~1cm off center but there isn't any bubbles or peeling.

Has anyone else experience this issue using this screen protector from Yootech? The cutouts seems to stay clear away of both the camera and the proximity sensor.

EDIT:
I bought and installed the mentioned glass screen protector. Works great and the screen behaves as it should during calls. As a side note, when I had the tap-to-wake mod from XDA working on my device and I enabled the power button to hang up calls, double tapping the screen to wake it up during a call would hang up the call as well.

I got the Yootech and it has worked very well for me. I did have the problem with the screen blacking out on calls with my previous protector and have not had it once since using this one.

Screen Protector I bought. Seems to work well. The only pain with them is since the screen is slightly curved you have to put it on almost perfectly.
I have this case and it seems to have saved it from a few small falls, but I don't know that I would trust it at a construction site. I would look for something a little more heavy duty.

Yeah man, honestly it's great. It's the Yootech one. I kind of cheated a little when I put it on- once I dropped it on and smoothed it out, I used a hair dryer to get the adhesive extra sticky. Been a week now without any issues and the first 4 days was without a case.

Edit: No idea what I did wrong with the link thing, but whatever, it's there.

I bought this one and found it to contour perfectly to the screen. It was actually really interesting applying it to the screen because you can just watch the air bubbles get pushed out by the weight of the glass.

http://www.amazon.com/gp/product/B00NWL33OO/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I have no problems with the proximity sensor with this one. YMMV

I don't have a 6p (considering selling Note 4 and upgrading right now, since no concrete news of Nexus 7 is available yet), but I bought the tempered glass from iCarez for friend's Moto G3 and I thought there was nothing wrong with it. So I would probably buy from them again for a different phone.

https://www.amazon.com/iCarez-Tempered-Protector-Lifetime-Replacement/dp/B0168XT3E6/ref=sr_1_4?ie=UTF8&qid=1466392961&sr=8-4&keywords=6p+tempered+glass

I'm currently using a Supcase Unicorn Beetle Premium hybrid case with a iCarez tempered glass screen protector. Great combination and it's the first case that I've left my phone in for more than a week without feeling like taking it out. Offers great drop protection as well.

Case:
http://www.amazon.com/dp/B015X90UJS/ref=cm_sw_r_tw_n_awdm_n6lHxbHBZ1MAA

TGSP (On Sale ATM):
http://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_tw_n_awdm_78lHxb5AJMRDX

The reviews on the Tauri case are pretty awesome. Do you use a (tempered glass?) screen protector with it by any chance? Was looking at this one: https://www.amazon.com/iCarez-Tempered-Protector-Lifetime-Replacement/dp/B0168XT3E6/ref=sr_1_1?s=wireless&ie=UTF8&qid=1468427022&sr=1-1&keywords=iCarez+%5BTempered+Glass%5D+Screen+Protector+for+Huawei+Google+Nexus+6P

Never used a tempered glass screen protector before and I'm scared their might be issues.

The one I use is apparently no longer available, but try this one

i use iCarez
i used two other brands before and this is the best one so far i highly recommend it

I just got the Surface case and love it. It works well with this screen protector and is basically edge to edge with no gap.

Huawei Google Nexus 6P Screen Protector, iCarez® [Tempered Glass] Highest Quality Premium Easy Install With Lifetime Replacement Warranty - Retail Packaging 2015 https://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_other_awd_c3W6wb0EX60YG

I've purchased a bunch of them and just throw them away if I'm unhappy. This one that I'm about to link fits like a damn glove and fits perfectly with the rhino shield.

Huawei Google Nexus 6P Screen Protector, iCarez® [Tempered Glass] Highest Quality Premium Easy Install With Lifetime Replacement Warranty - Retail Packaging 2015 https://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_other_awd_EOX2wb2Y008QC

I bought this one and it's been great so far! Sometimes I forget that I installed it.

https://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_other_awd_27lHwb8WZRH7Y

I bought this one just today because my phone arrives on Monday:

Huawei Google Nexus 6P Screen Protector, iCarez® [Tempered Glass] Highest Quality Premium Easy Install With Lifetime Replacement Warranty - Retail Packaging 2015 https://www.amazon.com/dp/B0168XT3E6/ref=cm_sw_r_other_awd_CClHwbE0DWQR3

Just from researching and reading reviews I felt this one was the best option... But that's just my opinion and I haven't tried it yet

Just about any TGSP will work. I have both cases and the one I bought fits both.

I've used these both.

I like the feel and fit of this one better:

https://www.amazon.com/gp/aw/d/B0168XT3E6/ref=ya_aw_od_pi?ie=UTF8&psc=1


This one is still good, just little more pronounced edges.

https://www.amazon.com/gp/aw/d/B016XZLFD6/ref=ya_aw_od_pi?ie=UTF8&psc=1

I do i have This case on my 6P combined with the holster from this case becuase i like holsters. I also have this screen protector on the screen installed easily and flawlessly.

http://www.amazon.com/gp/product/B0168XT3E6?psc=1&redirect=true&ref_=oh_aui_detailpage_o03_s00

I use this one. Comes with a lifetime warranty in case it breaks...the screen protector, not the phone. https://amzn.com/B0168XT3E6

I just put this on my S7E a few nights and am happy with it. It's a wet application, but after watching the installation visits it was pretty simple.

Samsung Galaxy S7 Edge Screen Protector [Case Friendly], Armorsuit MilitaryShield w/ Lifetime Replacement - Anti-Bubble Ultra HD Premium Shield - Clear https://www.amazon.com/dp/B01ACXSKAG/ref=cm_sw_r_cp_apa_9xKHxbJP78T43

The ultra HD one?

http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-Anti-Bubble-Replacements/dp/B01ACXSKAG?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

I love this Clear TPU case and have used this screen protector for over a year and it looks like new!

I use Spigen slim armor card case. Its not a wallet case but I can usually store up to 2 cards and a couple bills folded flat in there. Anything more it might start bulking in the back. Otherwise Ive been using spigens products and have been more than great. Ive used this case even when I used an iphone before i switched to android.

As for screen protector I use the armorsuit. It covers the edges nicely and fits with the case. Ive had this screen protector for about 3 to 4 months now and still responsive and working great!

Armorsuit MilitaryShield

I use this one, and it's pretty awesome.

https://www.amazon.com/Armorsuit-MilitaryShield-Protector-Replacements-Anti-Bubble/dp/B01ACXSKAG/ref=sr_1_3?s=wireless&ie=UTF8&qid=1480568693&sr=1-3&keywords=s7+edge+screen+protector

Ive been using this screen protector for about 5 months now and haven't had a problem with it not fitting

https://www.amazon.com/gp/aw/d/B01ACXSKAG/ref=mp_s_a_1_3?ie=UTF8&qid=1497878928&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=galaxy+s7+edge+screen+protector&dpPl=1&dpID=51WtCcEuicL&ref=plSrch

I got this one, but it doesn't work very well with the unicorn beetle case that I got. It did go on easily though, and it does still protect, just some of the edges are lifting a little.

I went with this one: https://www.amazon.com/gp/product/B01ACXSKAG/

It of course doesn't look or feel like the bare glass, but I'm happier with it (so far) than I expected to be.

I want to access an old hard drive (Maxtor Maxline III 250GB).

Would a SATA USB cable do? Like this?

Ok do you have a SATA to USB connector/caddy to plug your internal hard drive into then boot your Mac from it via USB? https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7/ref=sr_1_3?keywords=sata+to+usb&qid=1569147294&s=gateway&sr=8-3.

Are you able to plug your hard drive into a Windows PC and download a free program called HDTune that can check the whole hard drive for bad sectors using the error scan tab?

Do you have a spare hard drive (internal or external) that you could do a clean install of Mojave too to rule out a software issue 100%?

You can test the Mac with just one ram stick in one slot (alternate the slot) to work out if you have a ram stick fault or ram slot fault https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2012+RAM+Replacement/10374.

Cheers,

I'm in the UK, would this work too? https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7

​

EDIT - its super cheap and on prime

Ah, can't say I'm shocked as that this might have been something I overlooked. I bought this which I bought while admittedly in a panicked state since my hard drive was messing up and what not. Can you by chance direct me to the one I would need to be able to externally connect my computer?

Would this be suitable?

The hard drive itself is a Seagate Barracuda 7200.12 1TB

Then get one of these : https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7

Next, remove the hard drive from PC, and with another PC/laptop, attach to your guest PC with the adaptor....it will appear like a USB drive.

You'll need another USB drive to then copy your files to.

So if I get this and plug the USB into my spare laptop and the SATA cable into my old HDD, will I see the HDD and its files pop up in "Devices and drives" in file explorer (assuming it still works)?

Cool, and would this USBto SATA be ok? https://www.amazon.co.uk/gp/product/B01N2JIQR7/ref=ox_sc_act_title_1?smid=AEHQ1KJBIO3R9&psc=1

​

I'm pretty sure I've got some Torx screwdrivers around so might have a crack at taking the console apart later to see how I get on. Thanks for your help, it's appreciated.

Typical that this happens just as I start 10 days off work :(

I’ve seen some posts asking about the Spidgen Full Cover Glass tR Slim. I'll try to answer some questions today.

Rating: 9.5/10

Thoughts:

• I've used Spidgen protectors before and they always feel great. This one is no different. I've never had one crack on me, but I also take care of my phone.
  
• Front coverage is really well done.
  
• Slim, like the name implies.
  
• Glossy- fingerprint magnet like all screen protectors, but easy to clean.
  
• Reflectiveness is about the same as without the glass. On deep angles, you can see a slight fog of white due to not being adhered to the screen completely, which I think is absolutely fine because why are you looking at your phone like that anyway?
  
• If you run your knuckle across with some slight pressure, you can see some temporary ripple rainbow effect on the pressured area. It goes away after some time, but it can be noticeable with the screen off or with a black background. Again, this is due to the screen part not being adhered. This is the first time I've used a glass protector with only the sides having adhesive, so I'm not sure how this will effect it in the future. However, I don't think it's going to be an issue.
  
• You can tell in the pictures that the outside edges aren't completely covered but it's actually a good thing in my opinion. I use a case with it and if it didn't have that clearance, many cases (at least the ones I own) wouldn't fit or would screw with the glass cover and lift it up. Also, without the case it has a nice white trim since I got the black front with my Silver Pixel (looks really cool btw).
  
  The reason I gave it 9.5 instead of 10 is because of the inside coverage not being 100% accurate (See album). The top and bottom of the screen is perfectly fine and I understand the cutouts needing a little bit of extra space (camera/infrared sensor), but the left and right side of the screen are not completely covered. I heard that the other brands actually cover it a bit too much, while Spidgen's actually is a tiny bit short (preferable, but not ideal).
  
  ---
  That's it for the glass protector. Here's some bonus pics of some skins:
  
  Slickwrap's Hemp Skin
  
  DBrand's Concrete Skin
  Note: I cut out the Hemp sensor area because I had trouble with my Concrete skin before where it would interfere with the laser focus.
  
  ---
  Links:
  
  Spidgen Full Coverage: https://www.amazon.com/Spigen-Google-Screen-Protector-Tempered/dp/B01N63XLQ6/ref=sr_1_1?ie=UTF8&qid=1484602966&sr=8-1&keywords=spigen+glass+pixel+xl
  
  The case I used for the Glass pictures (Also love it):
  
  Spidgen Liquid Crystal Case: https://www.amazon.com/Spigen-Crystal-Protection-Premium-Clarity/dp/B01M1DR187/ref=sr_1_1?ie=UTF8&qid=1484603767&sr=8-1&keywords=spigen+liquid+crystal+pixel+xl
  
  
  
  
  
  
  
  
  
  

https://www.amazon.ca/Spigen-Google-Screen-Protector-Tempered/dp/B01N63XLQ6/ref=sr_1_2?ie=UTF8&qid=1484680772&sr=8-2&keywords=spigen+full+cover+pixel

I have one for my regular pixel, though only for a few hours now. Sofar it's fantastic.

This is the protector I have: https://www.amazon.com/dp/B01N63XLQ6/

It covers the full screen, and current one has survived since November. The previous one (same model) lasted only 3 months before it got a crack in it, which I'm not sure how it happened.

(Edit: grammar)

I'm on my 2nd Spigen and it seems to be very prone to scratches. It covers the phone extremely well fitment (sp?) wise but it seems a little on the fragile side. I just ordered the IntelliArmor so I'll see how that one works out. I'm in the united states and picked it up for like 12 bucks. Worth a shot.

I've had nothing but good luck with these: https://www.amazon.com/Spigen-Tempered-Protector-Friendly-Protection/dp/B01N63XLQ6/

I love my Oreo Pixel XL! Slapped this on my white/silver Pixel XL as soon as I got it :)

https://www.amazon.com/gp/product/B01N63XLQ6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

This is the one I have that has the black edges. There's also a version with white edges. Some people complain about air bubbles in the middle, but I believe they were just applied poorly. I put mine on, waited 20 minutes, and decided to pull it off to adjust it. Fit perfectly with no bubbles.

Here you go: https://www.amazon.com/gp/aw/d/B01N8S5R93/ref=mp_s_a_1_7?ie=UTF8&qid=1484281678&sr=8-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=spigen+pixel+screen+protector&dpPl=1&dpID=51V-lkkF15L&ref=plSrch

Or, XL if you have that: https://www.amazon.com/gp/aw/d/B01N63XLQ6/ref=mp_s_a_1_9?ie=UTF8&qid=1484281678&sr=8-9&pi=AC_SX236_SY340_FMwebp_QL65&keywords=spigen+pixel+screen+protector

I had a Spigen tempered glass screen protector on my Pixel XL, and absolutely loved it. It only had adhesive around the edges, but if it was dot matrix, you wouldn't know it. Or maybe it wasn't dot matrix, I don't know, but I couldn't even tell I had a screen protector on.

I have not found anything similar for the 2XL. I have the Amfilm one on now, and it's not bad, but the dot matrix is clearly visible and I think touch sensitivity has suffered a bit. I am disappointed to see that Spigen doesn't have anything for the 2XL. Based on what I've read, it seems the Amfilm is the best TGSP out of all the mediocre options, but I would love a TGSP just like the Spigen one I had. Anyone know if Spigen has plans to make one, or if there's another one that is very similar?

This is what has been on my phone since January. It went on without any issues and I don't even notice that it is there. I'm very happy with it.

https://www.spigen.com/collections/pixel/products/google-pixel-screen-protector-full-cover-glass?variant=29194832001

https://www.amazon.com/Spigen-Google-Screen-Protector-Tempered/dp/B01N8S5R93/

Spiegen just came out with a fullscreen one- Spigen Full Cover Glass Google Pixel Screen Protector with Tempered Glass for Google Pixel - Quite Black https://www.amazon.com/dp/B01N8S5R93/ref=cm_sw_r_cp_apa_4w7EybDV3V7B2

Still available in Canada... Sorry.

I'd recommend this guy for a screen protector (Spigen Full Cover Glass): https://www.amazon.ca/Spigen-Google-Screen-Protector-Tempered/dp/B01N8S5R93/ref=sr_1_3?ie=UTF8&qid=1501820609&sr=8-3&keywords=spigen+pixel

It's one of the only ones that covers the entire screen and doesn't have any halo or rainbow effects. There are some negative reviews on amazon, but I have it and can only assume that they must not have applied it correctly.

For a case I got the Case by Google silicon case (grey). Not the most protective, but I think it's pretty great. I tried out an Otterbox Commuter and an Incipio Dualpro, but I found they were just too bulky. Only issue with the Google case is that it's stupidly expensive for what it is. I grabbed mine on sale though.

Awesome just ordered one in Canada https://www.amazon.ca/gp/product/B01N8S5R93/
Also just got a spigen neo hybrid case as well https://www.amazon.ca/gp/product/B01MRJM6L4

Whitestone dome glass screen protector. Kind of pricey for a screen protector but I went through three prior and they were all terrible. I’ve been using a spigen neo hybrid with the Whitestone and it’s been great.

https://www.amazon.com/dp/B06ZZBPXMK/ref=cm_sw_r_cp_api_ZM0hAbYK3JBVN

Seems like there's actually a good glass option now, but its rather expensive. https://www.amazon.com/Whitestone-Dome-Galaxy-screen-protector/dp/B06ZZBPXMK/ref=sr_1_fkmr0_1?ie=UTF8&qid=1495160060&sr=8-1-fkmr0&keywords=whitestone+dome+s8+plus

Probably one of the more complicated applications, but seems promising. The plastic protectors were ok, they always left a rubbery feel that I could never get used to.

Regarding screen protectors:

I have found only one SP that has edge-to-edge protection and that also has adhesive on the whole screen and not only on the edges. https://www.amazon.com/Whitestone-Dome-Galaxy-screen-protector/dp/B06ZZBPXMK

or EU: http://www.mobilefun.co.uk/whitestone-dome-glass-galaxy-s8-plus-full-cover-screen-protector-p63747.htm

The availability and the price are kind of a bitch tho.. Also the installation. You gotta prepare a bit for that by watching youtube installation videos for example. But if you want a fullscreen SP, that is properly holding, water and dirt proof and are ok with spending a bit more then I can only recommend this one.

If you live in the US, this baby. There are some videos of it online and it looks to be the best possible screen protector for the s8. As a canadian, I am very sad they don't ship up here.

On Amazon. It was $15 off, not $20, but still.

https://www.amazon.com/Protector-Glass-Dispersion-Dome-Whitestone/dp/B06ZZBPXMK (Galaxy S8 PLUS)

I dont have a protector on my S8, but i know that people swear by this one here for the S8+ https://www.amazon.com/Protector-Glass-Dispersion-Dome-Whitestone/dp/B06ZZBPXMK/ref=sr_1_1_sspa?ie=UTF8&qid=1520271078&sr=8-1-spons&keywords=whitestone+dome+s8+plus&psc=1

The reviews for every single tempered glass screen protector have been abysmal. This is the only one that even comes close to making anyone happy, and it's still only 50% positive.

https://www.amazon.com/Whitestone-Dome-Glass-Anti-Scratch-Anti-Fingerprint/dp/B06ZZBPXMK

I think the chance of finding a good one for less than $25 is probably close to zero.

I love the combination of my I-blades and Whitestone. No problems at all. I am good to go in the next 2 years at least.

Maxboost Screen Protector for Apple iPhone Xs & iPhone X (Clear, 3 Packs) 0.25mm iPhone Xs/X Tempered Glass Screen Protector with Advanced Clarity [3D Touch] Work with Most Case 99% Touch Accurate https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_i_jnalDbJZNGD9A

Maxbost Screen protector, it will protect you screen against you cumming on it

Buy this one, it comes with a guide to lay on the phone for perfect alignment. Here.

I bought this one here and it works great

I got a screen protector from this company for my iPhone 6s https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_LszeAbVZFNEQH
When I got it they had a lifetime warranty which I used once with no problem but you're gonna have to check for this one. It comes with an install guide you put on your phone which is so easy and it's 3 protectors for 9$. Worth in my eyes. The quality is awesome
I dropped it a lot on the screen and not even a crack.
The time I broke it was a really serious drop

This is the screen protector I use, I have had the first one on since October and have noticed no scratching, 3D Touch works easily and it doesn’t reach to the edges of the screen.

https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_i_lHZzCb3YBM77J

https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_J481BbNFYW70F

I just got this one last week for my new iPhone and it works wonders!

I’ve had good luck with this screen protector and it comes with a plastic alignment tool you place onto the phone and you drop the screen protector right in place. I’ve used it on two iPhone XS and they’ve been perfectly aligned. It comes with the sticker for the dust removal too.

I just installed this screen protector: Amazon Link

This was the first tempered glass screen protector that I've ordered which came with a super intuitive guiding system. The protector leaves space around the bezel for a case, which is exactly how I intend to use it. It also doesn't cover the notch. The guiding system was ridiculously easy to use, and I got a perfect fit the first try. Plus, it includes 2 extra protectors, just in case. Highly recommend it, especially at the price I paid.


Coupled it with a Spigen Hybrid Armor and my phone feels well protected now.

ummm...I dont know? haha. I just generally buy cheap ones through amazon - my only screen is an anti-fingerprint coating (which doesnt last forever but w/e).

Literally the determining factor on this one was the fact that the pack included a guide to help get the placement correct (first time I have seen that).

FWIW this is what I got: https://www.amazon.com/gp/product/B073DLZWX7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I don't put too much thought into the protector. Mainly there to prevent light scratches - I dont expect it to save my phone from certain death. So with that in mind, the cheapo ones tend to do a great job. If it gets busted, no brainer to just slap a new one on.

ok, some people don't like your question. I would suggest doing it yourself. get a protector with an install kit, they make it very easy, and alignment is no longer an issue.

​

This is the one I got: from amazon

I'm referring to these two:

Pixel 2: https://smile.amazon.com/Google-Protector-LiQuidSkin-Coverage-Anti-Bubble/dp/B073RV1T6R/

Pixel 2 XL: https://smile.amazon.com/dp/B073RV6PQD

This one.

What about a non-glass protector? I'be been using the IQShield for about a week now and really like it.

https://www.amazon.com/dp/B073RV6PQD/

I went ahead with this one:
https://www.amazon.com/Protector-LiQuidSkin-Case-friendly-Anti-Bubble-Anti-Scratch/dp/B073RV6PQD/

It arrives tomorrow.

>Does anyone recommend using a screen protector, or am I okay to just type right on the gorilla glass?

I'm using a wet application, non-glass screen protector. I think the closest to the one I have is this one. Mine does a good job with fingerprints and light scratching but it's definitely not for everyone. It makes the screen feel plasticy (which feels less luxurious).

People always say to get the Whitestone Dome tempered glass protectors but those are expensive and if you mess up with installation (or if you notice problems with it later on) I heard they charge for a replacement + shipping. Doesn't seem worth it.

I just wish phone manufacturers would stop with curved screens altogether.

I had good luck with this one. Typing on it now and it's over a year old https://www.amazon.com/Protector-LiQuidSkin-Case-friendly-Anti-Bubble-Anti-Scratch/dp/B073RV6PQD

Cheap, clear TPU case that looks great:

https://www.amazon.com/dp/B074T74VCB/?coliid=I3O6H5OFINCPQH&colid=55ISL60ZXB13&psc=1&ref_=lv_ov_lig_dp_it

IQ-Shield screen protector. Cheap, you get two, the camera and sensor hole fully encompass them, and best of all lifetime warranty so if you get a scratch or don't apply it correctly, they replace it.

https://www.amazon.com/Protector-LiQuidSkin-Case-friendly-Anti-Bubble-Anti-Scratch/dp/B073RV6PQD/ref=sr_1_3?s=wireless&ie=UTF8&qid=1521752418&sr=1-3&keywords=pixel+2+xl+screen+protector+iq+shield

https://www.amazon.com/dp/B073RV6PQD/ref=cm_sw_r_cp_awdb_t1_v0FbBbD8V0C79

Not tempered but I've got this one and really like it.
I've never done a wet install before so I thought for sure I'd fuck it up...there'd be bubbles or dust trapped underneath it. But the instruction video was really good and miraculously I got it on perfect on the first try.

The texture is nice...more on the rubbery side but its smooth. Doesn't leave fingerprints or streaks very noticeably.

I go the IQ shield. It comes on with this liquid applicator and the didnt really bubble. It doesnt go all the way to the edge of the screen, BUT it leaves a nice gap so that you can put a case on the phone. So it covers all the usable screen.

https://www.amazon.com/gp/product/B073RV6PQD/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

IQ shield liquid plastic it may be the same one you are using. I don't like the idea of dropping my phone and having it cracked either,but the screen looks nicer is more responsive and smoother. It's quite a bit to give up.
https://www.amazon.com/gp/product/B073RV6PQD/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

I'm thinking of getting the Samsung Rugged Case, and wondering if a screen protector will fit when using the case? Thinking of this one: https://www.amazon.com/dp/B074G1W2RC?psc=1&pf_rd_p=f0eab1e5-6fb9-41f0-8024-4a7d38a13342&pf_rd_r=R76VSD0T544FVPWWDT7T&pd_rd_wg=NJnyc&pd_rd_i=B074G1W2RC&pd_rd_w=yRbXz&pd_rd_r=6339ede4-664b-44f1-9027-5c3f30083341&ref_=pd_luc_rh_crh_rh_sim_02_01_t_img_lh

I ordered a screen protector for my kid's Switch, and it seems pretty good with a nice fit.

Appreciate any info on whether they'll work together. Cheers

I've been using this one and it works great

Galaxy Note 8 Screen Protector Glass (Full Screen Coverage)(Easy Installation Tray), amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass Screen Protector 2017¡­ https://www.amazon.com/dp/B074G1W2RC?ref=yo_pop_ma_swf

Galaxy Note 8 Screen Protector Glass (Full Screen Coverage)(Easy Installation Tray), amFilm Dot Matrix 3D Curved Samsung Galaxy Note 8 Tempered Glass https://www.amazon.com/dp/B074G1W2RC/ref=cm_sw_r_cp_apap_BPLgMUfgaJptp

https://www.amazon.com/dp/B074G1W2RC/ref=cm_sw_r_cp_apa_I4qYzbS6XQGF7 this should be it. Granted I haven't had it on for a long period of time ye t, but it seems to be doing okay for the price paid.

I added some photos of the break, do you think something like this could work? https://www.amazon.com/gp/product/B074G1W2RC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I have had good experiences with them on other products, if it follows the same fate as the S8 (doesn't hold up because tempered glass is a meme on curved edges), then I'll go with a non tempered glass protector down the road unless some really great one comes along.

Personally I’m using the Anker Karapax Tempered Glass, installation was easy and it fits really well. 2 pack for under $10, felt good to me.

Link: Anker KARAPAX iPhone X Screen Protector GlassGuard for iPhone X / 10 (2017) with DoubleDefence Technology and Tempered Glass [ Case Friendly ] [2 PACK https://www.amazon.com/dp/B074YXH9WX/ref=cm_sw_r_cp_apip_QBunplPyyv8Ow

I brought the Anker Karapax. It has a “form”to place the glass accordingly to the notch. Reasonable price and easy application!

$10 for Anker GlassGuard for the X-series or Karapax for the 6/7/8 series iPhones


https://www.amazon.com/Anker-GlassGuard-Bubble-Free-Installation-DoubleDefence/dp/B074YXH9WX/ref=sr_1_3?crid=1U01BW0U6DF40&keywords=anker+karapax+iphone+x+screen+protector&qid=1562680035&s=gateway&sprefix=Anker+kara%2Caps%2C129&sr=8-3

I’m using an Anker KARAPAX screen protector and a dbrand grip, with the black camo skin. I used to use a PopSocket and a Spigen Ultra Hybrid . I liked that a lot, but there isn’t much screen protection(lip) when you use a glass screen protector. I’m using the same protector with my grip.

Sounds good! I’ll do that , hopefully I can return it.

Bought this one instead.

Anker KARAPAX iPhone X Screen Protector GlassGuard for iPhone X / 10 (2017) with DoubleDefence Technology and Tempered Glass [2 PACK] https://www.amazon.ca/dp/B074YXH9WX/ref=cm_sw_r_cp_api_LqEPAbQHWJRSG

I'm rolling with a UAG Monarch and some a cheap pack of screen protectors on Amazon with my XS. Love the combo.

Something like this?
Galaxy Note 8 Screen Protector Tempered Glass Shield, [Liquid Dispersion Tech] 3D Curved Full Coverage Dome Glass, Easy Install Kit and UV Light by Whitestone for Samsung Galaxy Note 8 (2017) https://www.amazon.com/dp/B075D1PR6Y/ref=cm_sw_r_cp_apa_MJeLAbYPJT6ZT

I have this one and was easy to install as long as you follow instructions. Can find video on instructions. Galaxy Note 8 Screen Protector Tempered Glass Shield, [Liquid Dispersion Tech] 3D Curved Full Coverage Dome Glass, Easy Install Kit and UV Light by Whitestone for Samsung Galaxy Note 8 (2017) https://www.amazon.com/dp/B075D1PR6Y/ref=cm_sw_r_cp_apa_Nb7JAbRA13RVR

Nope as the adhesive is only on the outside edges not in the middle.

This one is a little on the expencive side but it works because it adds a glue like substance between the phone and screen protector and you dry it with uv light.
https://www.amazon.ca/dp/B075D1PR6Y/ref=cm_sw_r_cp_apa_i_TWxuDbPMKCTS8

Video review

https://youtu.be/_tkrvZgRkHk

It's currently 30 bucks on Amazon right now

https://www.amazon.com/dp/B075D1PR6Y/ref=cm_sw_r_cp_apa_nUmgAbTXQRJQC

But it's currently out of stock and won't come back in stock until December 3.

What's UK, EE?

Note 8

• Whitestone Dome
  
  
• UAG Case
  
  DisplayMate rates this screen #1.
  
  Pixel 2 camera is better but no 2x optical zoom.
  
  S Pen + 256gb micro SD, those toddler videos and pictures will eat up internal storage, full access to everything even without internet.
  
  3.5mm headphone jack
  
  6gb of RAM
  
  https://kidsmode.samsung.com/en/manual.do
  
  No more TouchWiz.
  
  
  

This dude is great : Galaxy Note 8 Screen Protector Tempered Glass Shield, [Liquid Dispersion Tech] 3D Curved Full Coverage Dome Glass, Easy Install Kit and UV Light by Wh https://www.amazon.co.uk/dp/B075D1PR6Y/ref=cm_sw_r_cp_apap_GNVpPmj9wp1kJ

Here is the link:

https://www.amazon.com/Whitestone-Dome-Protector-Sensitivity-Anti-Fingerprint/dp/B075F49XQX/ref=cm_cr_arp_d_product_top?ie=UTF8

There's a slightly cheaper one (which doesnt include a micro usb -> C adapter) that is not in stock until 9/21

https://www.amazon.com/Whitestone-Dome-Protector-Sensitivity-Anti-Fingerprint/dp/B075D1PR6Y/ref=sr_1_4?s=wireless&ie=UTF8&qid=1505319123&sr=1-4&keywords=Whitestone+Dome+Glass%2C+%5BFor+Galaxy+Note+8%5D

https://www.amazon.ca/Whitestone-Dome-Protector-Sensitivity-Anti-Fingerprint/dp/B075D1PR6Y

This dude on the Amazon listing for the Note 8 Whitestone Dome TGSP claims the UAG Monarch works just fine with the Dome on his Note 8. Even has a picture of it (well, the case anyways, but why would he lie about it in an Amazon review for the Dome?).

Never heard of this whitestone. But its the best there is? Any cons? https://www.amazon.co.uk/gp/aw/d/B075D1PR6Y/ref=mp_s_a_1_2?ie=UTF8&qid=1521132672&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=whitestone%2Bdome%2Bnote%2B8&dpPl=1&dpID=51EDaOiN%2BaL&ref=plSrch&th=1&psc=1

NEW Schick Intuition Shea Butter Razor Advanced Moisture RefillCartridge 3 Blade https://www.amazon.com/dp/B075WW69PS?ref=yo_pop_ma_swf

Probably the best one I have used!

This one fits fine for me. I use it with an OtterBox Defender, and there's like a millimeter of clearance between case and protector. This is a dot matrix tempered glass protector with glue around black painted edges. Works fine for me until I pony up for a Domeglass protector
https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_i_48E4AbBHNZYB5

If you use it with a large case like a defender, put the protector on while the case is on the phone.

Check this one out. I just received mine this week and it does the job. The tempered glass also curves. https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_fin2AbE4YDKRA

Edit: nvm, I just noticed you had a pixel 1( not too sure of this will work?)

TGSP:
https://www.amazon.com/Protector-amFilm-Tempered-UPDATED-ADHESIVE/dp/B075WW69PS/ref=redir_mobile_desktop?_encoding=UTF8&psc=1&ref_=yo_ii_img

Cheap eBay TPU case:
https://www.ebay.com/itm/192313934159

https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_eqHhAbE3G66F7

Yes. I have the Spigen tough armor and it fits perfectly. Dust collects just like any glass screen protector. This has a good amount of adhesive. I used amfilm glass protector previously with my Nintendo Switch so I knew the company was reputable.

https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_aUJcAbT5YXH8F

Same thing happened to me yesterday. I had this glass screen protector installed on my XL and it landed on the rounded corner of the screen. The protector shattered but the screen was not damaged.

Edit: link

I've got an updated Tempered Glass from amFilm with much better adhesive. In my post history you can see me trash the version one and tried new ones.

https://www.amazon.com/dp/B075WW69PS/ref=cm_sw_r_cp_apa_acZ-zb3DAMT2G

If you have a Version 1, send them an email via Amazon and they sent a replacement.

It's much better. There's sometimes a "rainbow" oil streak depending if there's moisture and humidity in the air which couldn't be helped due to no adhesive on the clear glass it self. So far, I am very satisfied. Better adhesive and no popping sound from poor adhesive. If you want to give this one a try, I would recommend it with the updated version.

Note: it's a dot matrix design and the dots are visible if the screen is off or tilted in an angle to the light.

I have the amFilm TGSP for my 2 XL.

It was good at first. Adhesive only on the edges. Dot matrix pattern. I noticed no rainbow effect like the Spigen ones had for the Pixel 1's.

Today, I notice there's a hair between the screen and protector. Seems it slipped in through the adhesive.

I went to their store and saw that they have a version with stronger adhesive, so I contacted them and am awaiting feedback.

If the TGSP is the same, but has stronger adhesive, then it's a win in my book.

I had the same issue and ended up settling with a non glass protector, until I looked on Amazon again and found this one: https://www.amazon.com/dp/B075WW69PS/

It's my first adhesive around the sides only protector and was surprisingly easy to install. Micro dust specks don't matter anymore because there's no adhesive on the clear parts. The only issue I had was one time I dropped my phone and the screen protector just popped off. I stuck it back on but there was visible dust underneath it from the ground. Contacted support and they sent a new one out.

Have bought 2 of these Google Pixel 2 XL Screen Protector Glass, amFilm Full Cover (3D Curved) Tempered Glass Screen Protector with Dot Matrix for Google Pixel 2 XL (1 Pack, Black) https://www.amazon.co.uk/dp/B075WW69PS/ref=cm_sw_r_cp_apa_i_omDyCb8X4H737 Had to replace the 1st one as it smashed to bits when my phone fell from a 3rd floor carpark roof. My screen survived

Spigen Rugged Armor

https://www.spigen.com/collections/google-pixel-2/products/google-pixel-2-xl-case-rugged-armor

A good screen protector

https://www.amazon.com/Protector-amFilm-Tempered-UPDATED-ADHESIVE/dp/B075WW69PS

I use a full screen protector, including upper and lower edge.

Similar items on Amazon:
https://www.amazon.com/Black-1-Protector-Ultra-Clear-Bubble-free-Tempered/dp/B07B4R19ZD

https://www.amazon.com/Protector-amFilm-Tempered-UPDATED-ADHESIVE/dp/B075WW69PS

Maybe because I had issues with it in the past.

I was looking high and low for a screen protector for my Pixel 2 XL and despite a few different ones, I didn't really stick on one that works for my phone. So, I went without a protector for 2 years - only a case (and recently, just the dbrand skin)

Looking back, I noticed that there were very subtle scratches on the screen. But no major ones. I was careful when using the phone, drop it once (no cracks - case protected it), but otherwise, just using it normally.

That's why when I got my P4XL, I just didn't see a need to use one. A case is a different story altogether, but who knows... I may abandon the case too lol.

The best one I've had is this one from Amazon (https://www.amazon.co.uk/gp/aw/d/B075WW69PS?psc=1&ref=ppx_pop_mob_b_asin_image) you need a slightly larger case but it fits well and is a decent price.

[This one from amFilm]
(https://www.amazon.com/gp/product/B075WW69PS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) is great. It was easy to install and comes with a great warranty.

I have this one, and it looks really good. Fits the screen well and works with a case.

https://www.amazon.com/gp/aw/d/B075WW69PS/ref=mp_s_a_1_10?ie=UTF8&qid=1523138302&sr=8-10&pi=AC_SX236_SY340_FMwebp_QL65&keywords=pixel+2+xl+screen+protector&dpPl=1&dpID=51gXgBmTSmL&ref=plSrch

Zagg Glass is probably one of the better ones even though they're expensive. There are cheaper alternatives on Amazon, however, dust creeps in after a few weeks of use and you do get a little bit of the rainbow/ oil effect when the screen is off. Least with Zagg, you get a lifetime replacement if you keep breaking the protector.

Check out Whitestone Dome for the Pixel 2 XL too. Pricey, but looks like it solves all of the curved screen problems everyone runs into from time to time.

Personally, I have https://www.amazon.com/gp/product/B075WW69PS/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1 and it works great with cases (X-Level Guardian and Spigen Rugged Armor). I do have the two issues I mentioned above, but so far it really hasn't bothered me all that much yet.

https://www.amazon.co.uk/Invision-Monitor-Arm-Height-Assisted-Adjustable/dp/B0765Y4CT5/ref=mp_s_a_1_3?keywords=Vesa+mount&qid=1563016630&s=gateway&sr=8-3

I want to add a monitor arm like this to my cheap Ikea Linnmonn which isn't very strong (150cm x 75cm variant): https://www.amazon.co.uk/Invision-Monitor-Arm-Height-Assisted-Adjustable/dp/B0765Y4CT5/. I've been told to reinforce the desk by sandwiching two pieces of wood between the arm clamp and desk to spread the weight. Is the sandwich the best way to go, or should I simply add one wood piece under or over instead? Thanks. Table top > https://www.ikea.com/gb/en/p/linnmon-table-top-black-brown-10251352/

Warning:

Never pay someone using PayPal friends/family.


Always have a seller comment on your thread prior to making the transaction. This shows that the user hasn't been banned. You can check the ban list for a full list of banned users.

Title: [BG] Monitor VESA mount [H] Cash, BT, PP, located in London
Username: /u/aaronlam123
Original Post:
Looking for a table c-clamp style gas powered vesa arm for a monitor. Something like this invision pc monitor arm. Hoping to pay £15-20 pounds collected in London.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

So are you looking for advice on a mounting system?

I have this one (I'm in the UK):

Invision PC Monitor Arm - Ergonomic Height-Assisted (Gas Powered) Full Motion Single Arm Desktop Clamp Mount for 17-27" Screens Adjustable Tilt Swivel VESA 75 to 100mm Weight 2kg to 6.5kg (MX150) https://www.amazon.co.uk/dp/B0765Y4CT5/ref=cm_sw_r_cp_apa_i_dQ9HDbVGF6YR5

It rotates to portrait, and had proved very solid so far.

I had a stand like that with two 27" monitors. It was fine, no issue supporting their weight. I ended up replacing it with individual stand like this though, for better adjustability.

I've ended up buying a monitor arm from invision I found the Ergotron and Amazon basic too expensive 100 gbp :-O and the invision is 1/3 of the cost, had some good reviews as well. I can report back with feedback about the arm if you guys want.

https://www.amazon.co.uk/gp/product/B0765Y4CT5/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

How do I like the monitor or the arm?
The arm is really good I can move it in any direction and it's solid, easy to move around the desk too.

https://www.amazon.co.uk/gp/product/B0765Y4CT5/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

I bought two of these and two apple crates to stand my current desk on. Works perfectly, cost me £70. The crates have even given me extra storage space.

Messy atm coz I'm recording, but: link.

You need an RMA. Any hardware base issues you are having shouldn't be there. My fingerprint works 99.99% of the time on the first try. AS for gboard just tell it to add your wife's name to dictionary. If you are using a screen protector, F**K dot-matrix screen protectors, basically unless you use <https://www.amazon.com/Protector-Glass-Dispersion-Dome-Whitestone/dp/B078JR1HTN/ref=sr_1_5?ie=UTF8&qid=1518553296&sr=8-5&keywords=pixel+2+white> then touch will be wonky or if you don't use a screen protector at all. Not sure what you want here, this dimming/sound seems pretty standard when dealing with a oled/stereo. Definitely an outlier, Pixel 2 XL is by far the best and smoothest android out there, save maybe MAYBE the S8.

Now I have to disagree. I bought the Whitestone Dome screen protector and it's been solid. Well worth the price. The results are undeniable. Just my two cents.

https://www.amazon.com/dp/B078JR1HTN/ref=cm_sw_r_cp_apa_TgsHAb56PEZCD

This is the one I used. https://www.amazon.com/dp/B078JR1HTN?ref=ppx_pop_mob_ap_share
It's crazy expensive for a screen protector, but it's perfect. The application is kinda tricky and I had to redo mine after it didn't work the first time, but it really does work.

https://www.amazon.com/Protector-Glass-Dispersion-Dome-Whitestone/dp/B078JR1HTN

Expensive but go with the Whitestone dome protector https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/Dome-Glass-Protector-Dispersion-Whitestone/dp/B078JR1HTN&ved=2ahUKEwjRgujZtpHiAhWGTd8KHRnYAuMQFjAEegQIBBAB&usg=AOvVaw09IFrATtLRmiro0yUyagSy

I actually just ordered the Whitestone Dome Glass protector. It's pretty much the only non-matrix tempered glass one that has good reviews. Pretty highly recommended from Reddit people. It costs quite a bit and installation is a bitch but kinda worth it for a $950 phone I suppose.
https://www.amazon.com/dp/B078JR1HTN/ref=cm_sw_r_cp_apa_eTbPAbBJ5Z8P3

https://smile.amazon.com/Protector-Glass-Dispersion-Dome-Whitestone/dp/B078JR1HTN/ref=sr_1_3?ie=UTF8&qid=1520392696&sr=8-3&keywords=white+stone+dome

Is that it?

I can't say for sure because I don't have a tempered glass screen protector (I don't have a screen protector at all because I am a glutton for punishment, I guess). But this one has been in my Amazon cart for about four months. I've heard REALLY great things about its ease of application and quality - probably why its pushing $50.

If the Zagg one sucks, I'd ditch it. If it suits you better than other screen protectors, you might just have to be careful for however long it takes to get the replacement.

You might even be able to slap a cheap plastic one on while waiting for the Zagg screen protector.

I did hear about the Dome Glass screen protector being pretty nice, but it is significantly more expensive. The installation seems to be as fool-proof as possible, but it's more intimidating than other screen protectors.

Link: https://www.amazon.com/gp/aw/d/B078JR1HTN/ref=mp_s_a_1_2?ie=UTF8&qid=1526055940&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=dome+glass+pixel+2+xl&dpPl=1&dpID=516TK2LNPtL&ref=plSrch

I ordered amFilm from Amazon. https://www.amazon.com/dp/B07PP9Q288 Can be tricky to put on, but instructions are very helpful in getting all the bubbles out. No lifting. Hope this helps someone else.

Try this one:
https://www.amazon.de/amFilm-Schutzfolie-Vollständige-Hüllenfreundliche-Displayschutzfolie/dp/B07PP9Q288/ref=mp_s_a_1_2?keywords=amfilm+s10e&qid=1569647370&sprefix=amfilm+s10&sr=8-2

Installed this last night:
https://www.amazon.com/dp/B07PP9Q288?ref=ppx_pop_mob_ap_share

Bubble free, round edges to match the slight curve and very easy install! I saw this recommended on xda forums and it has exceeded my expectations.

Edit: this was the second screen protector I purchased, did not like the "jumpy" brand at all (Amazon).

Amfilm $10

https://smile.amazon.com/amFilm-Protector-Tempered-Adhesive-Installation/dp/B07PP9Q288/

Comes with an alignment frame, almost impossible to screw it up.

https://www.amazon.com/dp/B07PP9Q288/ref=cm_sw_r_cp_awdb_t1_d.6ZCbFB7NBG8

Have this for weeks and it still works fine

Get this:
amFilm Glass Screen Protector for Galaxy S10e, Tempered Glass, Full Screen Adhesive, with Easy Installation Tray (Black) https://www.amazon.com/dp/B07PP9Q288/ref=cm_sw_r_cp_apa_i_I72ZCbSX5BDPJ

Fit is near perfect. Comes with a plastic case thingy to make the installation easy. Broke the screen protector after 3 days (phone fell acreen first on gravel). Thank God I had it.

I have the amFilm one. Super easy to install with the included installation tray. But it has a black border around the sides which covers up a little bit of the screen. Had it for about two months and still no scratches which is nice.
Link: https://www.amazon.com/amFilm-Protector-Tempered-Adhesive-Installation/dp/B07PP9Q288/ref=sr_1_2?keywords=amfilm+s10e&qid=1571179968&sr=8-2

https://www.amazon.com/dp/B07PP9Q288/ref=cm_sw_r_other_apa_i_8qpLDbZ6PRWKH i see this one being recommended in xda.

Do you have any idea how it compares to this one from the same company? (Apart from the obvious value of a 3-pack)

Nope!

Although I'm now using this: https://www.amazon.co.uk/gp/product/B07PP9Q288/

It has a thinner black border than the other. Still no difference to image quality on the front camera that I can notice

https://www.amazon.com/gp/product/B07PP9Q288/

I found this one to be the best, out of the half dozen or so I tried.

I use this one with a spigen tough armor case with no issues.

I'm using this :

https://www.amazon.com/gp/product/B07PP9Q288/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

​

Not much of the side is lost from the black bezel since the phone is flat and it's also full adhesive.

Oneplus 7 Pro Tempered Glass Screen Protector,Fingerprint Scaner 3D Liquid Transparent Clear Full Curved Edge Case Friendly Anti-Scratch Coverage for Oneplus 7 Pro 2019-2 Pack https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_cp_apa_i_bp3jDb5746ZTT

This one is good. It's a bit of a pain to install but once installed you can't even tell it's there.

I personally think that we did shit while installing it lmao.

This is the one: Oneplus 7 Pro Tempered Glass Screen Protector,Fingerprint Scaner 3D Liquid Transparent Clear Full Curved Edge Case Friendly Anti-Scratch Coverage for Oneplus 7 Pro 2019-2 Pack https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_cp_apa_i_g7nuDbEXD574E

Finger print sensor and touch sensitivity are pretty good with it to be honest. Other than the lifting which is 100% our fault, I have really little complaints!

I'm currently using this one.

For the price it's pretty good, but I will be getting the Whitestone Dome protector next after this one.

I just looked yours up, and it seems similar to the one I used:

https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_em_r_mt_dp_U_xRsmDb4BWWXXP

​

Mine applied fine. I cured it with the UV light. It was perfect for about 24 hours. Today small bubbles started appearing and spreading throughout the day on a few of the edges. Are you having any issues like that?

I'm getting it tomorrow. I've heard really good things about it on xda. And it comes with 2 for 30 great value. Same as Whitestone dome




https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_cp_apa_i_YM37Cb27CAFE5

Oneplus 7 Pro Tempered Glass,Fingerprint Scaner 3D Liquid Transparent Clear Full Curved Edge Case Friendly Anti-Scratch Coverage forOneplus 7 Pro 2019-2 Pack https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_cp_apa_i_Vpe7CbKN87HFC

Just received mine and installed it today, basically a Whitestone without the fancy packaging and currently you can get a 2-pack for $30

I was using this one. I could understand how it could be a nice screen protector. But I had an astonishing amount of bubbles under the screen, and so much glue seeped into my speaker grill/charging port. I didn't even use the uv light so I didn't ruin the phone. Two times in a row.

I've had this one for a couple weeks and it's fantastic. Only complaint is the installation was somewhat difficult as it kept slowly sliding down before it had dried even though I'd done my best to make my desk level. So I had to carefully nudge it a little bit to keep it centered as it dried/cured/set whatever it's called with the UV light.

What I have on right now. I had a Whitestone Dome, which was nice, but after I dropped my phone I ordered this one, and it comes with 2 for almost half the price. Installation isn't quite as easy, but everything is of the same quality. https://www.amazon.com/gp/aw/d/B07RRVMX2Z?psc=1&ref=ppx_pop_mob_b_asin_image

Oneplus 7 Pro Tempered Glass Screen Protector,Fingerprint Scaner 3D Liquid Transparent Clear Full Curved Edge Case Friendly Anti-Scratch Coverage for https://www.amazon.com/dp/B07RRVMX2Z/ref=cm_sw_r_cp_apap_tgYnvkxLuTNgT

I've had it on since end of June with no real issues. Minor bubbles on edge from pocket flexing but they can pushed on and go away. I feel like I screwed up the install on that spot though. I tried to clean up excess glue and pulled it out from behind screen. The I stall is not easy but it works great.

http://www.amazon.ca/Orzly%C2%AE-Tempered-Protective-Protector-SmartPhone/dp/B00KQKATH8/ref=sr_1_2?ie=UTF8&qid=1406569304&sr=8-2&keywords=OnePlus+One+tempered+glass

that's the one i have.
Really liking it so far

http://www.amazon.com/gp/aw/d/B00KQKATH8?pc_redir=1414592296&robot_redir=1

Use the google. It helps.

I recently tried this one from amazon. Very pleased. As stated it doesn't cover the entire screen to avoid lift.

Seems like the perfect place to ask!

As /u/afjeep says, the Spigen gets good mentions.

I can definitely recommend that you NOT get the Zerolemon. It doesn't fit the curve at the edge of the screen, and leaves an 1/8" "halo" of un-adhered protector. It hasn't caused me any problems, but it isn't a good design.

I've never seen a fingerprint sensor protector. I don't think it's a capacitance sensor, and I suspect that it might not function if covered. I'll go cover mine with Saran Wrap and see if it works...

EDIT: Wow! It works! I'm amazed! It reads my fingerprint and swipes through a single layer of plastic wrap. It correctly rejected my other fingers, but responded to the ones I'd previously stored. When a little piece of the plastic folded over and created a bit of second layer, it stopped working. So. One layer good, two layers bad.

If anyone's interested, I got a black rimmed screen protector, like this: https://www.amazon.com/Spigen-Protector-Tempered-Coverage-Hardness/dp/B01N8S5R93/ref=sr_1_5?s=wireless&ie=UTF8&qid=1500658405&sr=1-5&keywords=pixel

Should give you the same effect

Here is the one I got. [click here ](Maxboost Screen Protector for Apple iPhone Xs & iPhone X (Clear, 3 Packs) 0.25mm iPhone Xs/X Tempered Glass Screen Protector with Advanced Clarity [3D Touch] Work with Most Case 99% Touch Accurate https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_j1E4BbBCM7QTV)

I got this one for cheap. Works super great and has a frame to place it on straight. Had one and it saved the screen so I got it again.

iPhone X Screen Protector, Maxboost (Clear, 3 Packs) iPhone X Tempered Glass Screen Protectors [3D Touch] 0.25mm Screen Protector Glass for Apple iPhoneX 2017 work with most case 99% Touch Accurate https://www.amazon.com/dp/B073DLZWX7/ref=cm_sw_r_cp_api_i_LXheBbQ9NDWQV

https://www.amazon.com/Zerolemon-Zeroshock-Shockproof-Dustproof-Compatible/dp/B00GYD782A get this battery its 10,000mAh!!!!

• just bought this :https://www.amazon.com/Protector-Tempered-Hardness-Featuring-Anti-Scratch/dp/B00NWL33OO%3FSubscriptionId%3DAKIAILSHYYTFIVPWUY6Q%26tag%3Dduckduckgo-d-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB00NWL33OO
  
• and this: https://www.amazon.com/OMOTON-Google-Nexus-Screen-Protector/dp/B01H74W2BQ%3FSubscriptionId%3DAKIAILSHYYTFIVPWUY6Q%26tag%3Dduckduckgo-d-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB01H74W2BQ
  
  HOPEFULLY ONE OF THEM HALFWAY HOLDS THE SCREEN GLASS TOGETHER
  
  ----
  
  
  
• car charger that is fast enough but not solid enough, needs mold/glue: https://www.amazon.com/gp/product/B01JRTHAE8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
  
  
• works well enough for home charging: https://www.amazon.com/gp/product/B00P6OMD96/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I thought you were talking about these kinds of protectors: https://www.amazon.com/gp/product/B073RV6PQD/ref=ox_sc_mini_detail?ie=UTF8&psc=1&smid=A3ERO5WWGZCNON

http://www.amazon.com/gp/product/B00GYD782A/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1