Best computer memory card adapters according to redditors
We found 533 Reddit comments discussing the best computer memory card adapters. We ranked the 126 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 533 Reddit comments discussing the best computer memory card adapters. We ranked the 126 resulting products by number of redditors who mentioned them. Here are the top 20.
this guy has the right idea. but when replacing everything you should highly consider upgrading the components.
hopefully your ipod is a 5th or 5.5 generation ipod classic video.
this is the best ipod classic model to upgrade into a higher capacity ipod (128gb, 250gb, 500gb)
then buy these parts on amazon...
http://www.amazon.com/gp/product/B008PO5CSI/ref=ox_sc_imb_mini_detail?ie=UTF8&psc=1&smid=ATVPDKIKX0DER or http://www.amazon.com/PNY-Elite-Performance-256GB-Speed/dp/B00FF90EZM/ref=sr_1_1?s=electronics&ie=UTF8&qid=1421032489&sr=1-1&keywords=pny+256gb+sdxc
http://www.amazon.com/gp/product/B00EPMWT1M/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=ANPO9IFXDOQAM
http://www.amazon.com/gp/product/B004FD1D2C/ref=ox_sc_sfl_title_2?ie=UTF8&psc=1&smid=A3JT9N5IAS99RQ
http://www.amazon.com/gp/product/B003E4TOWO/ref=ox_sc_sfl_title_4?ie=UTF8&psc=1&smid=ATVPDKIKX0DER
the first item is a 128gb & 256gb mini SD card. this will give you the best/fastest performance possible for the size/price. booting from a flash card will be much noticeably faster than your ipod.
the next item is an SDXC to CF adapter, which will allow you to connect the 128gb SD card onto your 1.8 ZIF.
the third item is the CF to 1.8 ZIF adapter for iPod.
the last item are the tools needed to do everything.
connect it all together and you got yourself a super fuckin cool ipod.
check out amazon and ebay for new cases, faces, whatever. you can even get the aftermarket U2 ipod covers and install them.
ipod motherboard.
cheers.
EDIT: last item is actually a higher capacity battery + tools.
Buy one of those Surface Book Micro-SD to SD adapters that sit flush in the Book. If you are going to use it as "permanent" storage.
Like this one https://www.amazon.com/BASEQI-Aluminum-MicroSD-Adapter-Microsoft/dp/B01AT7ECA2/
SSD? You mean the pro duo?
I have a pro duo adapter that takes two micro sd cards. Works flawlessly:
UCEC Dual Slot Micro SD/SDHC to Memory Stick Pro Duo Adapter for PSP Sony https://www.amazon.com/dp/B06XHPS43Q/ref=cm_sw_r_cp_api_I1U7Bb9T9G3NY
Be careful though, natively the PSP only supports I think like 32GB max for the sdcard, though with the dual micro sd I have heard rumors of up to 64GB but have never been able to confirm this.
Except those compact flash cards are crazy expensive for anything higher than a few gigs. A SD-CF adapter is the most economic way to get you back in the >100Gb range the iPod originally had. I still have a functioning 160Gb model and it's nearly full, so there's no other way I'd be able to fit all my music on it.
Edit: You're still looking at around $100 total.
Also guitar picks work as pry tools.
No trimming needed for this and it sits completely flush to the side. Just add a micro-sd card.
BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book
You can get an adapter to make a micro sd flush BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book https://www.amazon.com/dp/B01AT7ECA2/ref=cm_sw_r_cp_api_crTtzbD72VRPS
This is great stuff! Just FYI, they do make CF adapters for the eye-fi, but I think you do take a speed hit. http://www.amazon.com/gp/aw/d/B000YZGCIU
Here are a few. I’m boarding a flight so I can’t get you the URLs but searching and googling will help you out.
I’m sure there is a lot more but that should get you started hopefully!
For your SD card stick-out issue: Shortening microSD card adapter for Raspberry Pi, Cyntech Cases & Macbooks https://www.amazon.com/dp/B00HV4YFYU/ref=cm_sw_r_other_awd_ePB5wbJZ0B84M
PSP does support larger cards. With 2 EVO 128GB MicroSDXC, I got about 239GB space.
https://imgur.com/gallery/6iX3K
If your PSP already has the latest firmware and MicroSD card isn't fake, usually the reason why larger card doesn't work is some adapters don't properly support the latest Memory Stick specs. I bought the UCEC dual-slot adapter on Amazon:
https://www.amazon.com/UCEC-Micro-Memory-Stick-Adapter/dp/B06XHPS43Q
Buy this one, and see if it alleviates the problems.. if not return it.
https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2/ref=sr_1_3?s=electronics&ie=UTF8&qid=1542770079&sr=1-3&keywords=startech+ide+sata
​
Look at this picture on that ebay page, does that inspire confidence in what they're selling ?
​
https://i.ebayimg.com/images/g/5gwAAOSwEARbIPnJ/s-l1600.jpg
​
These are almost 100% made from salvaged parts /capacitors.
Surface Book 2 i7 here.
As a traveling programmer, light gamer, and part time student it's probably my ultimate laptop. I can take it out in a coffee shop and not get stares and then game in my hotel room on a TV.
I can flip the screen around to get a nice drawing pad to map out my work. When I'm at my office I have a surface dock that lets me hook up two extra displays. Theres plenty of IO and also has expandable storage. The keyboard is much nicer than any Macbook atm as well.
Here's a must have for any Book owner.
The only downside is dont upgrade to 1903 just yet as microsoft still hasn't patched the GPU bug. Other than that I think it ticks all of the boxes.
Couple of things you need first: A big MemoryStick Pro Duo, or better yet, a MicroSD-to-Memory Stick adapter and a MicroSD card between 32 & 128GB in size ( stay under 128GB to avoid menu lag). Here’s the adapter I used, with a 128GB MicroSD from Walmart:
PSP Memory Stick Adapter, Funturbo Micro SD to Memory Stick PRO Duo MagicGate Card for Sony Playstation Portable, Camera, Handycam https://www.amazon.com/dp/B07F68FCHD/ref=cm_sw_r_cp_api_i_rk6tDbC8YBTDB
Then you’ll need to install custom firmware. It’s basically installing a modified version of Sony’s operating system, that allows you to run unsigned or unofficial apps and games on your PSP. The best step-by-step guide for doing so, with download links for what you’ll need, is here:
https://hackinformer.com/PlayStationGuide/PSP/DEVICE_PSP.html
Once you’ve got ample storage and custom firmware, you’ll need emulators. I got most of mine from here although in some cases there are newer/better versions available on the respective product github pages or in the forums:
http://wololo.net/emulators-for-the-psp-ps-vita-the-ultimate-download-list/
http://wololo.net/talk/viewtopic.php?t=44039
Installing emulators is usually as simple as downloading with a PC, and extracting the eboot.pbp file and other included/required files & folders from the downloaded archive and onto the PSP MemoryStick into the correct folder location, usually something like “MS:/PSP/GAME/EMULATOR_NAME/“
However, in addition to the emulators, which function as the game consoles you want to play, you will also need the games themselves, which are collectively called roms. These you will need to place in a “roms” or “games” subfolder in each emulator’s folder. Those you’ll have to hunt down yourself, though; the legality of distributing roms varies by region, and may be against the rules to share here.
Once you get all that lined out, you’ll have to figure out each emulator’s controls, options and menu schemes; these are homebrews, that is, apps made by hobbyists and enthusiasts in their spare time. They often don’t have a unified menu structure or common user interface.
But once you get everything figured out, it will be totally worth it.
Edit: reworded homebrew extraction instructions for clarity(?)
I have a 2015 MacBook Air; the RAM memory is soldered on, but the SSD is replaceable. I got one of these: https://www.amazon.com/Sintech-Adapter-Upgrade-2013-2016-2013-2015/dp/B07FYY3H5F/ref=sr_1_3?keywords=macbook+ssd+adapter&qid=1564334188&s=gateway&sr=8-3 and one of these: https://www.amazon.com/Crucial-1TB-NAND-NVMe-PCIe/dp/B07J2Q4SWZ/ref=sr_1_1_sspa?keywords=m.2+ssd+nvme&qid=1564334236&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzRzhaTDM3TVFFQk5VJmVuY3J5cHRlZElkPUEwMzY2NTAxMktMVjVYNzM2TElVSyZlbmNyeXB0ZWRBZElkPUEwMzY1NDE5MjgxQVc5QUJDWUU1VSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= and now my MacBook Air has a TB of storage space.
I used the following guide but there are others: https://forums.macrumors.com/threads/upgrading-2013-2014-macbook-pro-ssd-to-m-2-nvme.2034976/
Your hard drive died. It happens..the drive in there has got to be 10 years old now, and it was the tiniest little hard drive you ever did see, anyways. Luckily, replacing the hard drive is not only super easy, but prices have gone down so much that you can replace it with 128GB for quite a reasonable price.
Instructions:
http://www.instructables.com/id/Ipod-mini-to-32gig-and-new-battery-without-scratch/
Parts I have used with success:
http://www.amazon.com/Digigear-SDXCF-Extreme-Ultimate-Compact/dp/B00EPMWT1M
http://www.amazon.com/Patriot-128GB-Speed-Class-UHS-1/dp/B00AOEU81I
http://www.ebay.com/itm/NEW-1300mAh-BATTERY-SCREWDRIVER-for-IPOD-MINI-4GB-6GB-/301459169425
Good luck!
This is the IDE to SATA adapter that is recommended on this sub: https://www.amazon.com/dp/B00EOJNGC2
You can't use the original grey IDE cable that comes in the stock xbox if you upgrade to a modern SATA drive with the above adapter. You'll need to pick up an 80 wire one. I use this one: https://www.amazon.com/dp/B003IDF0JC
Personally, I have a 2TB drive (WD20EZRZ) in mine - plenty of space for everything.
Here's the video on how to partition it on the xbox: https://youtu.be/6wsGjDOOAP0
That's a good chunk of the info for upgrading the hard drive. I use a modchip so that I can run it unlocked and don't have to worry about anything.
Install the modchip and HDD, then boot up the latest Hexen disc. It should be able to build your new drive for you. Then you configure your bios to point to the xbe that you want to boot into and then re-flash it to the modchip.
You should then boot to that xbe when you reboot the xbox.
Check out XBMC-Emustation also. Takes time to get it fully setup, but it's the best dash (in my opinion)!
...and no - installing an SSD will not do anything positive for you.
Also note that you’ll need a data adapter to use the drive. I recommend this one: https://www.amazon.com/gp/aw/d/B00EOJNGC2/ref=mp_s_a_1_11?ie=UTF8&qid=1522885867&sr=8-11&pi=AC_SX236_SY340_QL65&keywords=startech+sata+adapter
Also will need a Molex Y power splitter and an 80 wire ide cable (upgraded from the stock 40 pin) Everything all together should be around $75.
I reccomend using Chimp to clone your hard drive since you have a 1.6 and can’t tsop. I watched this video and it told me everything I needed:
https://youtu.be/lBC9599ww6I
Number 4 I’ll let someone more experienced help on.
I have a 2015 Macbook Pro 13" with 128GB SSD, 8GB RAM and a Transcend JetDrive Lite 330 (128 GB) installed:
https://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS128GJDL330/dp/B00MTHLURE
I use the Transcend JetDrive Lite to store my large mp3 collection, pictures, etc. and I really like it. It sits almost flush in the SD-CARD slot and out of the way.
My 2015 Macbook Pro is set up with 2 partitions (Sierra & Windows 10) and I use the Jetdrive to store most of my documents, music, pictures, etc. on it. The Transcend JetDrive Lite 330 is factory formatted as exFAT so both MacOS and Windows can access it.
If you have a 15" display:
https://www.amazon.com/gp/product/B00K73NT1C/ref=s9_acsd_al_bw_c_x_3_w
This is another storage alternative if you do not use your SD-Card slot...
It's impossible to upgrade the drive, but that's not to say you can't add space. Extra 128 GB for 13" and 15"
Note that regular sd cards will protrude, which could cause damage if you travel with it, but there are ones made with custom fit to be flush with the edge.
http://www.amazon.com/Transcend-JetDrive-Expansion-13-Inch-TS128GJDL330/dp/B00MTHLURE/ref=sr_1_1?ie=UTF8&qid=1427310663&sr=8-1&keywords=Transcend+jetdrive+lite
did you read the linked thread? someone mentioned using this extender: https://www.amazon.com/dp/B06X3Y4BBB/ref=cm_sw_r_cp_awdb_t1_ZfCUAb2YYV184
I will be testing this out. I raid regularly in WoW, and this past weekend, the SB2 worked great. Averaged between 40-60 FPS in raid at its native resolution with the graphics settings at 7 for normal world, and 5 for Raid. No, it isnt as good as my dedicated gaming and editing machine, but more than passable for me. I knew it wasn't going to get as good of performance as the other machine, but I bought it for travel to game and edit videos.
It is closer to the other machine for editing, only being slightly slower for scrubbing and rendering of 4K. My main machine is near to real time (5 min video takes just over 5 mins to render on the main machine.) I will give it a godo test tonight, but the initial testing had it rendering out the same 5 min video in a little under 7 minutes. Completely acceptable for a travel box.
Photoshop and Lightroom perform fantastically. While I havent done official tests or anything, they perform as well as my main machine. And being able to set them up to always use the GPU, they scream. and I love using it in tilt mode (with the screen flipped and folded over the KB.
I opted for the 15" i7, 16GB RAM and 256GB SSD. I have a 256 GB MicroSD I use for storage and got an adapter that is meant for the SB2 15". I will link it. This saved me a good amount of money. There is a huge jump between that 256GB and 512GB SSD. With everything I need, and using the MicroSD as a scratch disk, I still have over 100GB free space. Windows, WoW full, Premier Pro, Photoshop, Lightroom and various other apps related to CCE.
https://www.amazon.com/Aluminum-MicroSD-Adapter-Microsoft-Model-351A/dp/B0798MPVT2
​
The SB2 you mention (even the 256GB SSD) can easily be a full desktop replacement so long as expectations are within the real world and the device is used as designed. I see mine being used more than my main computer.
These are the accessories I got for my SB2 15 inch. The ProCase 13-13.5 fits the 15 inch SB2 perfectly.
I use the Skinomi matte body skin. There's only one 1 star review, but it fits nicely, like a screen protector but for the whole body. They make it in matte and clear. Be patient with the skin, you're going to need time with it.
https://www.amazon.com/gp/product/B01D2DE4L2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B077GFST1M/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0798MPVT2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B01MDTCGCP/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
The adapters are cheap and easily obtained, I highly recommend doing that over and actual duo.
https://www.amazon.com/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD/ref=sr_1_3?crid=13M7B7DMS4633&keywords=memory+stick+duo+adapter&qid=1565095504&s=gateway&sprefix=memosy+stick+du%2Caps%2C159&sr=8-3
Yeah, they speak standard SATA/AHCI/NVMe but they use a custom connector type. It's how they lock you into using Apple storage only (thanks Apple!)
Edit: If anyone reading is interested in upgrading their MacBook with a larger non-Apple SSD I've had really good success with these adapters and a variety of NVMe drives. Basically everything you need is in this thread, there are some caveats w.r.t. system firmware updates with a non-Apple drive so read carefully. A quick shout out to the best low cost NVMe drive I've used too. Total cost to upgrade from a 120GB Apple SATA SSD in my SO's 2015 MBP to a 480GB NVMe drive was like $115 and the drive is something absurd like 8x faster.
Then I'd recommend a Sony PSP. Preferably the 3000 or Go models (though a 2000 works fine, it just has less vibrant colors; avoid the 1000 and the European-only E1000 Street since they have less hardware capabilities). Just hack the PSP with ProCFW using this guide (you'll need a valid memory card) and then it can run a bunch of different emulators; it does GB/GBC/GBA especially well. You can get the emulators I use here, and put them in your memory card at
?:\PSP\GAME(where?is your PSP's drive letter after connecting it to your computer with a miniUSB cable like the old flip phones, not microUSB or USB type C like a smartphone). Homer's RIN is for GB/GBC games and has cleaner scaling than anything else, but has compatibility probs with a few games. EmuMaster (which plays GB/GBC and also Sega GameGear/MasterSystem) will handle some of the ones that RIN can't, but has ugly bilinear scaling. TempGBA is just the best GBA emulator you can get for the system and nothing else compares (it'll even play the Golden Sun games, with very slight frameskip in the overworld). You'll have to find/dump your own roms, though.Also, you can get a microSD to MS Pro Duo adapter for cheap instead of paying up the arse for an official memory card (Warning: Doesn't work with the Go since it takes a Memory Stick Micro (M2) instead). Make sure your microSD cards aren't too high of a capacity, though; a PSP only officially supports up to 32GB total (that is, 2x16GB in the adapter I linked; these should work perfectly), and my friend got his working with 2x32GB Class-10 SanDisk cards, but I hear certain brands won't work at that capacity and we haven't found anything above those 2x32GB cards that work at all (they are seen as 'damaged' and unable to be formatted in the PSP). Not that you'll need that much space for GB/GBC/GBA games anyway... :P
On the other hand, most cheap smartphones nowadays can run the My Boy! and My OldBoy! emulators just fine, even for 'problem' games like Golden Sun, so getting a cheap tracfone and a decent bluetooth controller might be an even better idea than going for an aging PSP, and still cheaper than most of those clone consoles. Of course, that comes with Android's audio latency problems, and you won't be able to use save states in those emulators unless you get the paid versions (which are $4.99 and $3.99, respectively) but I think it'd still be better than getting any of the clone systems you mention, especially since Android emulators are so easily updated. Note that there are also other free GB/GBC/GBA emulators for Android, I just know from personal experience that the MyBoy ones work well...
Consider a low profile micro SD to SD card adapter.
Other options -
Solder to SD card connector and find some space to hide a card in the case. More permanent, but difficult to change.
Do the same but with a USB 3.0 thumb drive. This would probably be the fastest connection but you give up use of the USB 3.0 port
Use a low profile right angle USB adapter and some velcro to attach a USB 3.0 thumb drive to the outside of the case.
you don't even need a Compact flash card these days. Way cheaper to just get a CF to SD card adapter and use any SD card you have laying around. https://www.amazon.com/Digigear-SDXCF-Extreme-Ultimate-Compact/dp/B00EPMWT1M/
New battery is a worthy investment too if you're opening it up.
The Trascend Jet Drive Lite tends to run a bit cheaper, but the flash memory isn't removable as microSD, so it may be incompatible with other devices (depending on the dimensions of the SD card slot).
http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS64GJDL330/dp/B00K73NSXQ/
The best way is probably half-length SD cards that are designed to fit in your SD card slot and not stick out, so that you can leave them in there permanently.
You can also get a thing which does the same thing for microSD cards: https://www.amazon.com/Aluminum-microSD-Adapter-MacBook-Non-Retina/dp/B00WQVK754/
I'm quite interested in whether the aforementioned Silverstone adapter or similar might work in your R710. I have an 8-bay R510 that I'm filling with shucked BestBuy 8TB WD Reds. I'm using UnRaid and hoping to put in an addon card with dual m.2 SSD drives for array cache. I've been eyeing [this card] (https://www.amazon.com/StarTech-com-Controller-Card-Adapter-PEX2M2/dp/B017IM54GM/ref=cm_cr_arp_d_product_top?ie=UTF8), one reviewer wrote:
> "This 2-port (B-key SATA) card worked out of the box in my FreeBSD 10.3 system (presumably Linux support is just as easy). No problems with running it in an old system's PCIe 2.0 x16 slot, despite the vendor website specs calling for PCIe 3.0.
> The BIOS identifies this card as Asmedia 106x, and FreeBSD sees it as a 12-port 6Gbps Port Multiplier (presumably it's the same chipset as the version with the SATA passthrough). FreeBSD dmesg output:
kernel: ahci0: <AHCI SATA controller> mem 0xf9ffe000-0xf9ffffff irq 28 at device 0.0 on pci1
kernel: ahci0: AHCI v1.31 with 12 6Gbps ports, Port Multiplier supported
>Although the card has a 4-pin (floppy style) power connector, it seems to run fine without the extra juice. The manual indicates it can run on either PCIe bus power or external power. In my case, bus power seems to be enough.
> I'm currently running it with a pair of Crucial MX300 m.2 drives, no problems so far, though the PCIe 2 bus bottlenecks when both drives run flat out. Either drive can read at 450MB/s, but both together top out at 360MB/s each (I think the bus, could be the controller). It's likely the performance would be higher in a PCIe 3.x slot.
The StarTech card appears to have a SATA controller which may help with being able to boot from plugged in SSDs.
Please update this post with your findings if you can.
And if you have the SB, get this adapter:
http://www.amazon.com/gp/product/B01AT7ECA2?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o00_s00
From a technical standpoint, it is fine to leave the SD card in. However, it is advisable to remove the SD card prior to applying major windows updates (to avoid installation errors, and failed installs.). If you are interested, there are flush fit aluminum SD adapters that can be used with micro SD cards so that the card mounts flush and does not protrude from the SD card slot on the Surface Book.
Here is an example:
https://www.amazon.ca/gp/aw/d/B01AT7ECA2/ref=ox_sc_act_image_1?smid=A2EPGHYCUTGVR6&amp;psc=1
quick Tip: BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book 2 15" (Model-351A) https://www.amazon.com/dp/B0798MPVT2/ref=cm_sw_r_cp_api_i_rFOZCbJNAJV70
Plus a micro SD card, great way to expand your memory for cheap.
A bit of indirect advice:
Size: Memory Stick cards (Pro Duo specifically) come in 4, 8, 16, and 32GB variants, so you'll most likely be looking for a 32GB card.
Speed: There are a variety of speeds out there, depending on the manufacturer, but as the PSP can't read faster than about 10MB/s anyway, you don't need to worry about high-end MS cards that are really designed for digital cameras and computers.
Brands: I would recommend going with a Sony or SanDisk card [1]. However, as with a lot of memory media these days you need to be extremely careful of who you buy from. Flash memory is one of the most commonly counterfeited products on the market and it's very easy for legitimate companies to inadvertently stock counterfeit cards. So whatever card you decide to buy, make sure you test it and see that it performs at the approximate speed indicated and that you have the full amount of space as described on the packaging.
Alternatives to expensive cards: There are also micro-SD to Memory Stick Pro Duo adapters (though they may not be reliable using two cards in tandem instead of one). I've never tried it out on a PSP, but supposedly they work and buying two cheaper micro-SD cards and an adapter might be cheaper and easier to replace in the event that something happens (because ultimately all of these small electronics aren't going to be perfectly reliable).
[1] Sony has more stringent requirements about where they source their memory from, so Sony-branded memory should be above average. SanDisk makes their own memory so they can pick from the best price/performance of their own inventory without having to rely on a memory maker to supply them with reliable parts.
I am running IDE -> Sata adapters. These ones to be exact: https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2/ref=sr_1_1?ie=UTF8&amp;qid=1484897598&amp;sr=8-1&amp;keywords=startech+ide+to+sata
13/14 I bought run perfect.
If you have all the gear (the xserve, the cables, the SFP card, the raid box and caddies as well) I would say why not!
Mine just holds veeam backups - it's not fast enough to use as a data store for VM's (I get around 100MB/s read / write on it)
StarTech IDE2SAT2 and a 24" long 80-wire 80-pin high-speed IDE cable.
An IDE to SATA adapter, so you can use a hard drive or SSD that isn't 10+ years old and ready to kick the bucket.
I've had good luck using this one, just make sure you also replace the ribbon cable with an 80-conductor cable.
This is the one that usually gets recommended
You can buy an adapter that will allow you to use any SATA drive. However, you won't get full SATA speeds because you're limited to the speed of the IDE bus (which is about 100 MB/s). Some people have put in an SSD drive and noticed a little speed increase, but it won't be major like installing an SSD in a desktop/laptop computer. A normal SATA 3.5" drive has been fast enough for me. Load times are really quick.
To upgrade the softmod, use this Quick Upgrade from Rocky5's Softmodding Tool. You just FTP it to your the root of the E partition and run the default.xbe file. If you haven't nulled your EEPROM, you need to do that as well so if the HDD dies, you can easily replace it. You can run Rocky5's Softmodding Tool Extras Disc from your HDD or use ConfigMagic to do that.
Also, if you have a SATA HDD dock or some kind of SATA to USB adapter, nulling the EEPROM would allow you to easily build an upgrade HDD on your PC for the Xbox. You may even be able to hook the HDD directly into another slot in your computer, but I can't remember. I want to say yes on that though. Anyway, you'd use XboxHDM2USB beta 3 to do that.
OR, you can use Chimp 261812 to clone your HDD to a larger one. You will need a molex splitter, IDE to SATA adapter; this one is recommended a lot but others work too. And you will need a 40-pin 80 wire IDE cable; 24 inches is recommended. You'll boot you Xbox as normal, load Chimp, and it will tell you when to hot swap the DVD drive with your HDD you're upgrading to. It's pretty straightforward.
As for the DVD drive, they are interchangeable between Xbox consoles and are not locked to the motherboard. I don't know much about those, but you can try cleaning the laser or adjusting it doing a laser pot tweak. I think that's what it's called. Someone more knowledgeable than me can chime in on that.
And lastly, since it's pretty much obligatory here, remove the clock capacitor in your Xbox if it hasn't been removed and your Xbox isn't a revision 1.6 or 1.6/b.
This will help...https://youtu.be/yc_1KnqKr94
80 wire cable... https://www.amazon.com/gp/product/B003IDF0JC/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Adapter... https://www.amazon.com/gp/product/B00EOJNGC2/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1
Since you're tsop'd, you can get any hdd/ssd you want. I used these exact cable and adapter on my recent hdd upgrade and the cable snaps in firmly, and works great. The rotation of the connectors is backwards, but you can't see it once installed. the adapter also comes with a molex power adapter, so I now have an extra. You dont need to buy one. I just shove the extra wire behind the dvd drive and you cant see it.
I've recommended this hub many times. It's what I use to backup my photos while traveling. It may not work with all external hard drives, but I use a larger flash drive and it works great. But if it has its own power source it sounds like it might work.
Alternately you could go with one of these. They are bit more expensive, but seem to work a little easier.
Also, I think it's a bit easier to use SD cards for this scenario without a computer. I use this adaptor and haven't had any issues. Makes life a little easier while traveling not having to worry about bringing a separate reader.
Hope all that helps a little.
Not really.
https://www.amazon.com/gp/aw/d/B00NPTXJTC/ref=ya_aw_od_pi?ie=UTF8&amp;psc=1
https://www.amazon.com/gp/aw/d/B00EPMWT1M/ref=ya_aw_od_pi?ie=UTF8&amp;psc=1
Not OP but a 5Dc owner if you buy this set (which you should) buy this bad boy and used regular SD cards with a 5Dc.
Has anyone tried one of the "shortening" micro SD adapters, such as:
http://www.adafruit.com/products/1763?gclid=CjwKEAiA3IKmBRDFx-P_rLyt6QUSJACqiAN8wIc_fIqHXFAJtVmHGPOOgVzMfBJhWFf5_hRyJqLfpxoCe7Dw_wcB
or
http://www.amazon.com/Shortening-microSD-Raspberry-Pi-Macbooks/dp/B00HV4YFYU
I'd like to know which Chromebooks they fit well in.
I use something similar to this:
http://www.amazon.com/gp/aw/d/B00MTHLURE/ref=pd_aw_sims_1?pi=SS115&amp;simLd=1
With my MacBook Air and would highly recommend it. No real drawbacks and you can just leave it plugged in as long as 128gb is enough.
I doubt the Genius Bar will be able to do this. You can perform an SSD replacement yourself, or go to a third party shop to do it.
Otherwise the cheapest and quickest option would be to just buy one of these clever things, buy a good 128gb or 256gb microSD card with it, and keep it in your SD card reader. This particular SD card adapter will stay flush with the side of your Air and you'll basically have an external storage you can keep files in.
Sounds like you've thought through every aspect! Now, I'm guessing you're not considering the Core m3 model? Because I believe that with all the accessories is still cheaper than the SB and it is a TERRIFIC device! The processor speed on an m3 is equivalent of i5's just a couple years ago, it's stout.
With what you've described, I'd go for the Entry Level 128GB SB and buy a 64/128GB mSD Card here which will sit flush with the body of the device!
I can totally get by with 128GB though, I was completely fine with the 64GB in my base-level SP3!
As far as SB accessories, you shouldn't need a battery pack. I get between 8-10 hours depending on usage and I can't imagine you have anywhere near 8 hours of classes in one day?
Not a Mac, but my set up is a Surface Book with dGPU, 256GB SSD, 8GB of RAM with an i5 processor.
Then I use a 200GB Micro SD for extra storage when the slot is free, with this nifty little adapter. The adapter is also available for earlier Macbooks too.
Really just depends what you're going for. At the end of the day, software is software. Pick whatever suits your tastes in terms of hardware, as long as it's a bit of a powerhouse when you need it to be.
I chose the Surface Book for it's incredibly well calibrated display, and 1700:1 contrast ratio.
Also, it's pretty.
You may be right, but virtually no laptops are designed that way. And I suspect the "permanent expanded storage" crowd is much smaller than you think, relative to all laptop buyers.
Fortunately, there is an easy fix if you want permanent expanded storage, at least if you own a popular high end device like a Surface Book or MacBook Pro:
https://www.amazon.ca/gp/aw/d/B01AT7ECA2/ref=ox_sc_act_image_1?smid=A2EPGHYCUTGVR6&amp;psc=1
you can do just that and swap as you need. I am currently Experimenting with a Pi4 and have 3 sd cards I am swapping between.
I recommend you get a micro sd ribbon cable adapter for your pi. It will not only allow you to use full size sd cards but if you are swapping a lot it is easier to get the cards out and you will wear out the easily replaced adapter instead of the sd card slot on your pi.
https://www.amazon.com/Gplink-Extension-Adapter-Flexible-Extender/dp/B06X3Y4BBB/ref=sr_1_3?keywords=micro+sd+ribbon&amp;qid=1567513704&amp;s=electronics&amp;sr=1-3
https://www.amazon.com/XBERSTAR-Newest-Version-SD2Vita-Adapter-Loading/dp/B0798JJ82Z
Get this adapter from amazon!
If you are worried about storage, check out this SD card adapter. It turns your SD card slot into a microSD for more permanent storage. It matches the surface book, and it sits flush. BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book 2 15" (Model-351A) https://www.amazon.com/dp/B0798MPVT2/ref=cm_sw_r_cp_tai_i_EMjcBb01GY0MT
Buy a micro SD card and this adapter, it works amaiznly. I have a 128GB micro SD card in my and leave it in all the time.
Micro SD Card adapter
First you shouldn’t buy that SSD. All it is is an adapter put on a NVME m.2 SSD. Instead buy each part separately and save ~$100
2TB SSD
Adapter
And no that housing won’t work for the Apple SSD you would need this
There are some people, but not me, who will literally glue a small size/large capacity USB into a port. Something like this: http://www.amazon.com/gp/product/B00LLEODCK
My previous laptop had an SD card reader that always had an SD card installed. However, it was a full-depth reader, and the card didn't stick out at all. On my C720, it sticks out far enough that I worry about it snapping off, or worse: damaging the reader itself.
I tried one of these http://www.amazon.com/Low-profile-microSD-card-adapter-Raspberry/dp/B00AKO3EVS but it was too thick to fix in the slot. There are a number of other adapters though, that I suspect would work just fine.
An SD card will stick out of the Series 3. If you're looking for one that will more or less permanently be in there, you're going to have to get a micro SD card and get a low profile adapter for it, so it doesn't stick out as much and potenally getting broken.
Sandisk and Kingston are at the top of their game. Like djds23 said, class 10 is the only way to go if you're planning on doing anything major with it. Don't forget about free 1 TB you get from having the chromebook. The cloud storage is the whole point of the chromebook.
IDE hard drives were the standard back in the ps2 era and today, they're really hard to find and extremely limited when it comes to max capacity compared to today's standard, SATA.
A better option is to pick up this compact IDE to SATA adapter from StarTech (https://www.amazon.com/dp/B00EOJNGC2/ref=cm_sw_r_other_apa_ZWYDybGVEG2KF)
I got one for both my softmodded ps2 and chipped og Xbox and it allowed me to connect a modern day 2TB 2.5" SATA hard drive perfectly. The HDD and adapter fits inside the ps2 enclosure with room to spare. A much better option than spending a fortune on a larger old IDE hard drive on eBay.
I've used these, but Startech makes a nice higher quality one
The adapter has jumper settings for master/slave/and cable select. When cloning your original drive you'll want to set the adapter to slave. You'll also need an 80 wire IDE cable. Using the original 40 wire cable doesn't work with SATA drives.
Lastly you'll need a molex Y splitter to power both hard drives at the same time while cloning. Also make sure you have an original Microsoft controller. I've heard 3rd party controllers don't work with Chimp, though I can't verify this since all my controllers are Microsoft S controllers.
I would really encourage you to think about upgrading the hard drive after you softmod it. Playing backed games on discs can get expensive since most of the games are 6gb+. Even a 80gb IDE drive would be a massive help!
The hardest part of modding is finding a flash drive that works.
What you will need.
Flash Drive (should work)
https://www.amazon.com/SanDisk-Cruzer-Blade-drive-SDCZ50-004G/dp/B002U213Y8/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1539785044&amp;sr=8-2&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=sandisk+cruzer+blade+4gb&amp;dpPl=1&amp;dpID=411nUnjz9eL&amp;ref=plSrch
Usb to xbox controller port
https://www.amazon.com/Mcbazel-Xbox-Converter-Adapter-Original-Console/dp/B076HHZ41Z/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1539784602&amp;sr=8-2&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=xbox+controller+to+usb+adapter&amp;dpPl=1&amp;dpID=41y27JttbeL&amp;ref=plSrch#
Sata to IDE adapter (If you upgrade hard drive)
https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2/ref=mp_s_a_1_6?ie=UTF8&amp;qid=1539784695&amp;sr=8-6&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=sata+to+ide+adapter&amp;dpPl=1&amp;dpID=51styPntUEL&amp;ref=plSrch
80 connector IDE cable
https://www.amazon.com/Ultra-Cable-Device-Conductor-inch/dp/B000I21Y28/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1539784965&amp;sr=8-2&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=80+connector+IDE+cable&amp;dpPl=1&amp;dpID=41gZKwD33jL&amp;ref=plSrch
Use the Rocky 5 mod and youtube tutorial and you will be fine!
StarTech.com IDE to SATA Hard Drive or Optical Drive Adapter Converter - 40-Pin PATA to 2.5 inches SATA HDD / SSD / ODD Converter https://www.amazon.com/dp/B00EOJNGC2/ref=cm_sw_r_cp_apa_mybVBb60ETMAQ
I wouldn't buy a used hard drive.
I like Seagate drives, but any SATA drive should work with:
THIS CABLE: https://www.amazon.com/gp/product/B000I21Y28/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
AND THIS ADAPTER: https://www.amazon.com/gp/product/B00EOJNGC2/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1
ok so for the cf adapter I used the digigear found here. it works great and would highly recommend. for the sd card itself I used a 128gb sandisk microsd with an adapter. Now for the battery, I bought an ipod mini on ebay found here. Honestly I really cheaped out on the battery and so far for the day I've been using it it's been good. Reviews for the product are pretty mixed so I'll PM you in a few days after I've seen if I got fucked or not. It was $6 though so worst case scenario I'll bitch at the seller if it fails and buy one from ifixit for $15.
Thanks for the tip! Turned out I needed to get a CF to SD card that had true IDE on it. This one here did the trick: https://www.amazon.com/Digigear-SDXCF-Extreme-Ultimate-Compact/dp/B00EPMWT1M
I've been using two of these for a few years now with no problems in a Nikon D300.
"Isn't too old" is giving the CPU short shrift. Other than the rare 3215U in the Toshiba Chromebook 2 2015, the 3205U is the newest Broadwell Celeron there is for Chromebooks. The only thing more powerful than these are the far more expensive Core i3 and Core i5 Broadwell chips in the Toshiba and Dell 13-inchers. In fact, the 3205U benchmarks neck and neck with the Haswell i3 in the older C720p and Dell 11.
I'm pretty sure the storage can be upgraded due to it being a Broadwell CPU. All N29xx Bay Trail and N3xxx Cherry Trail laptops have soldered onboard storage.
We're planning to outfit the my buddy's C740 with a 64GB microSD card slotted into a low-profile adapter that will sit flush in the edge of the laptop. That'll leave his USB 3.0 port open for flash drives and the USB 2.0 port for his mouse dongle.
I had an old laptop that I had the problem with. I used one of the SDcard adapters to solve the problem. I'm not sure if this one (https://www.amazon.com/Adafruit-Shortening-microSD-Raspberry-Macbooks/dp/B00HV4YFYU/ref=sr_1_1?ie=UTF8&amp;qid=1494253570&amp;sr=8-1&amp;keywords=sd+card+shortening) but it was something like this that I used to solve the problem. Maybe you should check it out.
I took some measurements in order to help in the search. I measured 6 random SD cards, and SD card adapters, and they range from 1.25" to 1.255", so it seems industry standards is likely that.
I then measured the the overhang (.293") of a standard SD card to determine the optimal length of: 0.957"
The issue now is finding the right measurements, as most companies don't go out of their way to provide measurements of their cards, or do not describe the measurements well enough to know which is the true length, width or height.
For example, this JetDrive Lite: http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS128GJDL350/dp/B00K73NT1C
Measures (LxWxH): 0.9 x 1.1 x 0.1 inches. So, if the inserted length is 1.1, then it might work great with just a slight overhang. However, if it's the .9 for the inserted length, then it wouldn't full insert given the lip on the JetDrives.
I highly recommend Transcend Jetdrive SD expansion cards on top of any Hard disk drive that you might use. Here
It's very useful for archiving purposes, and you stick it in and forget.
I have a late 2013 13" MBP w/ Retina
I also added a Transcend JetDrive Lite 128GB storage expansion which is $97.99 on Amazon.
Minor cosmetic imperfections - I can take photos if you're interested. Used throughout my undergrad studies for homework and standard goofing off.
I have been using one of these in my MBPr 13" and 15" for a couple years and they are great!
Sits near flush with your MacBook. So you never need to take it out.
https://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS128GJDL330/dp/B00MTHLURE/
Quite a bit overpriced. Just go to Amazon and pay about half unless you really think aluminum is worth the premium...
https://www.amazon.com/dp/B00MTHLURE
I just got one of these for my 2013 MBPr. It has been amazing!
http://www.amazon.com/gp/product/B00MTHLURE/ref=pd_lpo_sbs_dp_ss_1?pf_rd_p=1944579842&amp;pf_rd_s=lpo-top-stripe-1&amp;pf_rd_t=201&amp;pf_rd_i=B00K73NT0S&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_r=10Z8HPVJHFFPYEP0QYQQ
The best option until OWC or any 3rd party replacement PCIe SSD is available is something like the Transcend Jetdrive:
http://www.amazon.com/gp/aw/d/B00MTHLURE/ref=pd_aw_sims_7?pi=SS115&amp;simLd=1
Unfortunately, it's nowhere as fast as SSD.
I also have a 13 Air and bought this a few months ago along with a 200 gig card. TBH, I've only had 1 gig recently with it (I have another older laptop to use SSL for my monthly gig with a Rane 57) but it seems to work without any hitches. My buddy who recommended it to me hasn't had any issues with it and he uses his regularly.
https://www.amazon.com/gp/product/B00WQVK754/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1
After going through the specs on BaseQi website and doing some measurements with regular SSD cards, I decided to try their 103A model:
https://smile.amazon.com/gp/product/B00WQVK754/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1
It fits like a charm on the XPS 9560. Actually its a teensy tiny bit (like, I dunno, 1mm) flushed inside the laptop, if that. Other than the color (it's made for Macbooks) I would think it was actually made for the 9560.
Here's a pic of it in my laptop: http://imgur.com/a/LPHYK
Some companies make SD Card adapters for MicroSD Cards specifically meant to add permanent storage to the MacBook Pro without the SD card sticking out. I'm using one with a MicroSD card and it works great and looks likes it's built into the MacBook. I keep Starcraft 2, Final Cut Pro, Motion, Unity, and other heavy duty apps on the MicroSD card and have had no issues with performance whatsoever.
Oh my! Now that is the product I've been looking for, thank you for posting it. It looks like this model will be the one to fit my late 2013 MBPR 15".
Because it's a sata m.2 drive, you either need a pcie card with a sata controller onboard like this one: https://www.amazon.com/StarTech-com-M-2-Adapter-PCIe-Express/dp/B017IM54GM?th=1
Or cheaper if you don't mind longer shipping: https://www.ebay.com/itm/PCIe-2x-M-2-SSD-Adapter-PCI-express-Dual-NGFF-B-B-M-Key-SATA-SSD-ASM1061-/112108844193
&nbsp;
The other option is a pcie card, with a sata connector on it. You put the ssd in the card, and then run a sata cable from the card to a spare sata connector on your motherboard: https://www.amazon.com/Adapter-advanced-solution-Controller-Expansion/dp/B07JKH5VTL/ref=pd_sbs_147_7?_encoding=UTF8&amp;pd_rd_i=B07JKH5VTL&amp;pd_rd_r=ca985b47-d027-42e0-b97a-28255f795bb2&amp;pd_rd_w=lUOGL&amp;pd_rd_wg=DpZhN&amp;pf_rd_p=1c11b7ff-9ffb-4ba6-8036-be1b0afa79bb&amp;pf_rd_r=2P1D5XPHC8S0CYZBZ1WE&amp;psc=1&amp;refRID=2P1D5XPHC8S0CYZBZ1WE
I think you would be safe playing non AAA titles off your sd card. With that being said, it’s only a guess. What I came here to do was to show you this adapter
I personally got a 256gb SD card and mater to it to the Base QI adapter. It works for my needs and is far more mobile than an external SSD. The drawback to any external storage on the surface book though, is that it becomes inaccessible when removing the screen, so the other alternatives are to look at cloud storage options such as One Drive, which will cost more long-term due to subscription costs. So, I'd suggest weighing up what suits you best.
As for the contacts, use a Q-tip and LIGHTLY go over them with specialised contact cleaner.
Okay, so if you're going to video edit on Final Cut Pro, then go with the MacBook. FCP just works much better and is only on Mac. However, if you want to edit on Adobe Premiere, then go with this model. It has a 940M dGPU which helps with video editing.
Microsoft Surface Book (256 GB, 8 GB RAM, Intel Core i5, NVIDIA GeForce graphics) https://www.amazon.com/dp/B0163GS05Q/ref=cm_sw_r_cp_api_J5.Azb0SJ326H
If you want more storage, try to look for a different configuration with 512GB on other retailers. Or, you can use an SD card to hold documents and movies with BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book https://www.amazon.com/dp/B01AT7ECA2/ref=cm_sw_r_cp_api_KgaBzbQDD4KX3 which allows it to not stick out of the laptop.
I've had the SB2 i5 128GB for 6 months (love it) and am still sitting pretty with 70GB left. I use it mostly as a netbook that I can draw on and take handwritten notes so storage is either in the cloud or when I run out I'll buy the flushmount SD adapter (https://www.amazon.com/Aluminum-MicroSD-Adapter-Microsoft-Model-350A/dp/B01AT7ECA2/ ) and an SD card at significantly cheaper than OEM storage.
hmmm how about ebay, you can use a debit card with PayPal, just don't buy the sd card off ebay because it will be fake but an adapter should be safe to buy on ebay, you should be able to buy the sdcard locally, just buy from a reputable dealer in greece. Hello from a Greek living in Canada.
You can also go to a small computer shop in Greece and ask if they can order one for you, might cost more for their effort, but if you don't have a debit card/credit card then that's your only choice. Do you have any friends with a credit card/debit card/paypal? if so then ask them if they can order it for you.
https://www.amazon.com/BASEQI-Aluminum-MicroSD-Adapter-Microsoft/dp/B01AT7ECA2/ref=sr_1_2?ie=UTF8&amp;qid=1506319683&amp;sr=8-2&amp;keywords=surface+book+sd+card+adapter
https://www.amazon.com/SanDisk-microSDXC-Standard-Packaging-SDSQUNC-128G-GN6MA/dp/B010Q57S62/ref=sr_1_1?s=electronics&amp;ie=UTF8&amp;qid=1506319743&amp;sr=1-1&amp;keywords=sANDISK+128GB
https://www.amazon.com/SanDisk-microSDXC-Standard-Packaging-SDSQUNC-128G-GN6MA/dp/B010Q57S62/ref=sr_1_1?s=electronics&amp;ie=UTF8&amp;qid=1506319743&amp;sr=1-1&amp;keywords=sANDISK+128GB
EDIT EBAY LISTINGS - http://www.ebay.com/itm/Baseqi-Ninja-Stealth-Drive-for-Microsoft-Surface-Book-13inch-/182776184628?epid=1070302585&amp;hash=item2a8e4f3f34:g:VAMAAOSwv9hW5Pjf
It works great for me. The biggest advantages over the SP4 are the battery life, screen size, and form factor. The 128gb can feel limiting sometimes, but I got this for external memory (since I never use SD cards). It fits fine on small college desks. The battery is about 10 hours with 50-75% brightness and light use, plenty for a full day of classes.
I should mention that MS advertises a 1 year battery life for the pen. This might be true (I haven't had it for a year), but the included battery only had enough charge for a month. It uses an AAAA battery too, which isn't generally sold in stores. So I recommend ordering a few AAAA batteries (I think I got a 4-pack for $5-10) just in case.
Buy a couple of these, either fabricate a cover or just use tape to ensure they can't pull the extender out. If they damage this extender cable bill them $20 or $40 for the damage and swap in a new one.
Micro SD to SD Card Extension Cable Adapter Flexible Extender SD/RS-MMC/SDHC/MMC Compatible with GPS,3D Printer,Raspberry Pi,TV,DVD https://www.amazon.com/dp/B06X3Y4BBB
Cool, so like this? SD to MINI Adaptor (Amazon)
Nice build!
I found this one on Amazon: https://www.amazon.com/UCEC-Micro-Memory-Stick-Adapter/dp/B06XHPS43Q/ref=sr_1_1?ie=UTF8&amp;qid=1536787587&amp;sr=8-1&amp;keywords=PSP+sd+adapter
How does this one work?
I'm pretty sure it will work, this is the adapter I have (from amazon) https://www.amazon.com/gp/product/B06XHPS43Q/ref=oh_aui_search_detailpage?ie=UTF8&amp;psc=1
Similar situation here. I don't see a compelling reason to upgrade from my 3770k- especially with Intel's continuing market segmentation shenanigans IE: Hyperthreading.
Depending on your motherboard, you might be able to mod your bios to enable booting from NVMe drives. IIRC this is the guide I used. Went smoothly on my Asus P8Z68-V motherboard with a $15 adapter card and an A-Data SX8200 480GB.
I hear it's also possible to avoid touching your motherboard's firmware by by booting into the UEFI console via Clover on a USB drive, and loading the necessary NVMe driver each boot that way.
This. Absolutely correct and Thumbs Up! the 660p uses a good chunk of SLC Cache which makes it ideal for a games drive etc. - especially if you can run 2 in RAID0 (that's what I do; 2x 1TB 660p) and have a primary NVMe as boot drive that has higher sustained read/write, e.g. the 970 "EVO Plus" or "PRO" or WD Black Series and such. Now, the advantage of NVMe is that you can get cheap riser cards that will turn a PCIe slot into 2x NVMe for quite cheap since they just pass through the lanes. You cannot boot from it in most cases, but you can mount 2x 660p this way for storage. The riser shouldn't be more than $15. So, in total, your 2x 660p with the riser card roughly cost you as much as 1x 660p twice the capacity: 1x 1TB 600p = 2x 1TB 660p + riser.
Now, I have 3x NVMe slots on my board and don't use an adapter, but this is one I found on Amazon: NVMe Adapter for less than $11
I have used this one and I know others have as well and reported it works for Dell servers. Presumably that silverstone would work just fine. It shouldn't be hard to make these since NVMe is using PCIe, so all it should be is just a hardware adapter/passthrough.
I believe for the initial setup, you need an official vita memory card, but you could use something like IMCUnlock to enable storage on that model afterwards. That would allow you to store all of the necessary files for Enso on internal storage.
The benefit to the IMCUnlock, to my knowledge, is that its permanent, so once its installed, your done. Updates to firmware and what not don't affect it.
As far as microSDs and storage, I use this SD2Vita adapter and a 128 GB card. I've heard 256 GB works too, but I haven't tried personally. Will all of my plugins installed on the internal storage, I can just boot up my Vita, and its mounted automatically.
I have this: https://www.amazon.com/XBERSTAR-Newest-Version-SD2Vita-Adapter-Loading/dp/B0798JJ82Z/ref=sr_1_5?ie=UTF8&amp;qid=1535913225&amp;sr=8-5&amp;keywords=sd2vita
And a Japanese Vita Slim, I can take it out without any issue just like a game cartridge. I take it out, reboot my console and it default back to the 2GB built in storage that the slim has. I can easily play physical games that way.
Not sure how it would work if you have a Vita memory card though.
The Vita card slot is proprietary. The SD adapter fits in the game card slot, not the memory card slot. The custom firmware redirects the execution from the memory slot to the game.
This is the specific one I ordered, https://www.amazon.com/gp/product/B0798JJ82Z I'm only posting this because they do vary, I bought one prior and it was slightly too big to close the flap.
Use this micro sd card adapter and buy a mem card to put in it:
BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book 2 15" (Model-351A) https://www.amazon.com/dp/B0798MPVT2/ref=cm_sw_r_cp_api_i_RweoDbZ8C6GMR
hi! i have exactly the same interest.
anyway, do check the new baseQI mSD adapter for SB2 15" that'll flush fit (350 model flush fits 13" and 351 model flush fits 15"): click!
https://www.amazon.com/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD
It shouldn't be that hard, all you'll need is a computer and an SD card adapter. Here's a guide https://youtu.be/PKNMP0yWPeA
And the adapter
https://www.amazon.com/dp/B07F68FCHD/ref=cm_sw_r_cp_apa_vyZQBb809ERYD
This adapter works perfectly:
https://www.amazon.com/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD/ref=mp_s_a_1_3?keywords=pro+duo&amp;qid=1574041704&amp;sr=8-3
This SD card (16, 32, 64, 128GB all work fine)
https://www.amazon.com/SanDisk-Ultra-microSDXC-Memory-Adapter/dp/B073JWXGNT/ref=mp_s_a_1_3?keywords=32gb+micro+sd+card&amp;qid=1574041777&amp;sr=8-3
I also have a 1000 model and bought this one from Amazon recently and can confirm it works fine 100%
https://www.amazon.com/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD
With a 4 GB sd card anyway
I'm using this one it's cheap and works great. https://www.amazon.com/gp/product/B07F68FCHD/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Yep, and grab some cheap memory
&#x200B;
Sony Memory Card Shell
64 Gb Micro SD
&#x200B;
That said, you can find all sorts of teardown guides
You can also buy the UMD drives for pretty cheap
I have no experience with replacing the UMD drives however and don't know if there could be compatibility issues.
If you get one of these adapters it should work good enough (some issues with sleep I believe, and there's a different one for a couple bucks cheaper with less reviews)
Sintech NGFF M.2 nVME SSD Adapter Card for Upgrade MacBook Air(2013-2016 Year) and Mac PRO(Late 2013-2015 Year) https://www.amazon.com/dp/B07FYY3H5F/ref=cm_sw_r_cp_apa_i_oGwwDbAH5WAAN
Here is an example of what you’d need, and keep in mi d they don’t always get the best reviews I might ask around some
https://www.amazon.com/dp/B07FYY3H5F/ref=cm_sw_r_cp_awdb_t1_8H0yDbVFS3JPS
Cant find yours. Try this:
Sintech NGFF M.2 nVME SSD Adapter Card For Upgrade 2013-2015 MacBook https://www.amazon.com/dp/B07FYY3H5F/ref=cm_sw_r_cp_api_oH6RBbD35FFYV
But technically any should work as they are just merely a passive adaptor ( the adaptor literally just change the connector type)
Yes, but only if you use an adapter like this one
You can throw in a larger SSD. You can use a $15 adapter so you can use any nvme pcie ssd just have to make sure your on high Sierra first.
Sintech NGFF M.2 nVME SSD Adapter Card for Upgrade MacBook Air(2013-2016 Year) and Mac PRO(Late 2013-2015 Year) https://www.amazon.com/dp/B07FYY3H5F/ref=cm_sw_r_cp_api_i_V9s6CbM7QZNFX
Pretty well so far. The sd card just goes in the slot in the cf/sd adapter, I haven't been taking much pictures because of finals this week. It's nice to use a larger capacity for CF format, since large CF cards are expensive. CF cards are usually used on higher end and older cameras. Just make sure that your camera has updated firmware to use larger card sizes and can use CF II, because they are bigger than normal CF cards you usually get.
They are something like this.
http://www.amazon.com/SD-CF-II-Type-Adapter-Supports/dp/B000YZGCIU/ref=sr_1_1?ie=UTF8&amp;qid=1371088689&amp;sr=8-1&amp;keywords=cf+to+sd+adapter
Will something like this work?
Looks like it just turns SD card into a CF 2 card. Just making sure.
I use this:
http://www.amazon.com/gp/product/B000YZGCIU/ref=oh_details_o02_s00_i00?ie=UTF8&amp;psc=1
with
http://www.amazon.com/gp/product/B00B7ID99I/ref=oh_details_o01_s00_i00?ie=UTF8&amp;psc=1
and it works perfectly. I shoot video/weddings with it and havent come across a buffer issue. The only issue I did come across was using a mucro sd/sd adapter/sd to cf adapter and the buffer was unbearable.
I originally bought this set up hopefully to work around the bent pins in my 5dmarkII. this set up didn't make it worse or better, since you still need to take it out of the CF slot completely.
Why is this my main set up now?
32GB cards are about 20 bucks compared to the high price of a 16GB CF card. 16 GB I can maybe shoot 500 photos on RAW, when in 32 I can easily double that. I don't need to depend on a card reader as well.
Here is the one I used along with 2 64gb cards. I fuckin love it.
One thing to remember, put one card in the a slot at a time, format that card through your PSP, then format the other card in that same slot you previously used. I think after all of that, I put both cards in, and had to do one more format. Good to go!
I have this memory card adapter with 32+64GB SD cards.
The regular charger and Sony battery that comes with the PSP should be good enough. Most batteries you find are aftermarket junk and lots of people have bad luck with them.
I also have one of these coming in the mail soon. It fits 2000 and 3000 models only.
I have a question though, would he ever consider using this MS PRO DUO adapter so that we could use 2 micro SDs? This is great though, I am definitely interested in this.
Oh gotcha. I also don't like it sticking out. They do have these in case you want to re-purpose the B and not spend more for a new Pi 3 replacement. Again, still contact point issue.
There are micro SD adapters which may slide all the way into the normal SD slot. Not sure how you get them out when you need to though, since I haven't done it myself.
Here's an example of one:
http://www.amazon.com/Low-profile-microSD-card-adapter-Raspberry/dp/B00AKO3EVS
Very strange, I have used multiple different SATA drives(SSD/SSHD/HDD) and converters and never really had an issue.
I can tell you from my own experience that these converters work perfectly:
More expensive Delock
http://www.delock.de/produkte/S_61702/merkmale.html?setLanguage=en
And Cheaper chinese generic
ttps://www.ebay.com/itm/PATA-IDE-TO-SATA-Converter-Adapter-Plug-Play-7-15-Pin-3-5-2-5-SATA-HDD-DVD-VM-/253335440412
Other people have had good results with the Startech, uses the same chip as the Delock.
https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2
I guess you're right, pretty much all of the drives i've found are old/expensive. Do you reckon that these would do the job?
https://www.amazon.co.uk/Drive-3-Connector-Ribbon-Cable-Yellow/dp/B016EILOTM/ref=sr_1_5?ie=UTF8&amp;qid=1473009164&amp;sr=8-5&amp;keywords=80+pin+ide
https://www.amazon.co.uk/StarTech-Pin-PATA-SATA-Adapter/dp/B00EOJNGC2/ref=sr_1_18?ie=UTF8&amp;qid=1473008959&amp;sr=8-18&amp;keywords=sata+ide+adapter
Just done my first hard drive upgrade (and aged about 10 years in the process). I bought two adapters, the red StarTech one:
https://www.amazon.co.uk/dp/B00EOJNGC2/ref=pe_3187911_185740111_TE_item
And this green one branded "VGEBY":
https://www.amazon.co.uk/dp/B06XW6LN6T/ref=pe_3187911_185740111_TE_item
Long story short, the StarTech would boot to stock dash, but the DVD drive would no longer load any games. Tried with 40 and 80 wire IDE cables. Xbox just said it couldn't recognise the disk. The green one works perfectly with an 80 wire cable. Avoid the StarTech.
2TB WD Green
80 wire IDE
Disk prepared in Windows 10 using a USB to SATA enclosure and running xboxhdm23usb.
In all seriousness, I (plus many other people here) would just recommend installing a big HDD and using that to play games.
Here's what I've used:
https://www.amazon.com/Blue-Cache-Desktop-Drive-WD10EZEX/dp/B0088PUEPK/ref=sr_1_1?keywords=WD+Caviar+Blue&amp;qid=1550341281&amp;s=gateway&amp;sr=8-1
https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2/ref=sr_1_3?crid=3FG5A4UU7UKTH&amp;keywords=startech+ide+to+sata+adapter&amp;qid=1550341294&amp;s=gateway&amp;sprefix=Startech+IDE+t%2Caps%2C147&amp;sr=8-3
https://www.amazon.com/SIENOC-wire-Drive-Ribbon-Cable/dp/B0126SUXAK/ref=sr_1_3?keywords=80+wire+IDE&amp;qid=1550341366&amp;s=gateway&amp;sr=8-3
Max you will spent is like $45
If the 500 is a sata, you will need this
StarTech.com IDE to SATA Hard Drive or Optical Drive Adapter Converter - 40-Pin PATA to 2.5 inches SATA HDD / SSD / ODD Converter https://www.amazon.com/dp/B00EOJNGC2/ref=cm_sw_r_cp_apa_fG9SBb9279YFR
Power splitter
CY IDE 4p to dual IDE Y Splitter 10cm hard disk Power supply Extension Cable https://www.amazon.com/dp/B00K06XEK2/ref=cm_sw_r_cp_apa_PH9SBbJ9E0XFK
USB to Xbox
NEORTX USB Adapter Cable for Xbox (Black) https://www.amazon.com/dp/B00SMCJB4Y/ref=cm_sw_r_cp_apa_tI9SBbXZK36D0
The hardest part is getting a jump drive that will work... If you have something that can be measured in MBs not GBs it pretty much gaurenteed to work... I went to a mom and pop PC store who also fixes pcs to find one
I also bought the HDE two pack. My experience has been:
Buy 2TB WD Blue drive. This works and locked successfully, after I got through the adapter issues below, on a 1.1 Xbox.
HEXIN - Freezes drive security (can't lock/unlock), and Chimp can't see it. Might work with an external USB enclosure, but I don't have one to test with. Works fine after you get the drive locked, though I had to use the 40-pin IDE cables for some reason, otherwise I get Error 13.
Startech - Chimp saw this, so I was able to clone my existing drive and lock it, but it refused to start, giving me Error 07 with both the 40- and 80-pin cables.
HDE - Bought these after the Startech didn't work. I don't know if they freeze the drive security like the HEXIN did, but they also give me Error 07 with both cables when trying to start the Xbox.
So to summarize, I had to use the Startech adapter to clone and lock it, and the HEXIN adapter with the 40-pin cable to have it boot.
Also this is the comment someone else referenced containing the link to HDE. Since the Ebay page doesn't exist anymore, people buy the HDE adapters.
weird, they usually work if led is on.
but as its that seller id still wager its that still.
&#x200B;
i get mine from ebay off diff sellers as some update the item to the newer one the chinese are making that doesnt have the master slave jumper pins which i dont want. had one doa out of about six so far, of the older type.. but that amazon seller seems like 50% of his dont work on average atm lol.
&#x200B;
if you want better quality get the startech one for 15 quid.
https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2/ref=sr_1_3?keywords=startech+ide+to+sata&qid=1557474690&s=electronics&sr=1-3#customerReviews
&#x200B;
theres some other higher quality ones around that price too that kaosengineer knows the names off, i'l search for his post quick.
&#x200B;
did you double check the cable connections and adapto connection to hdd?
&#x200B;
actually thinking back to the person the other day, both of his were dead too, so i stil bet its the adaptors.
&#x200B;
also did you check drive in your pc before you put in xbox?
https://www.amazon.com/gp/product/B073CKHX7X/ref=oh_aui_detailpage_o05_s01?ie=UTF8&amp;psc=1 Is the IDE cable I went with, it does seem to have 80 pins when I look at it.
I'll try connecting the sata drive with the ide adapter to a pc in the meantime to see what happens.
EDIT: My BIOS sees the xbox hd connected to the pc's IDE port. Macrinum Reflect doesn't see the drive though, but it's there in device manager. I tried to boot clonezilla from the PC and I just got ATA errors and I couldn't go anywhere. The xbox drive is good as it works just fine with the xbox transferring files via FTP.
I tried the sata drive with the IDE adapter attatched and the computer doesn't see it. I'm going to go with this startech adapter https://www.amazon.com/gp/product/B00EOJNGC2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1 before I try the TSOP mod.
Thanks guys
>Error 13 with the new drive is at least a good sign in that it indicates that the TSOP flash went ahead just fine. I assume you're seeing the purple EvoX shield during the flubber sequence, as well.
That's correct.
>Presumably you're using a PATA to SATA adapter: even if you can confirm that's working in, say, a PC, doesn't mean it'll work in an Xbox. The green ones in particular tend to cause problems (and have been doing so since we first started putting SATA drives in these consoles).
This is the adapter I'm using: https://www.amazon.com/gp/product/B00EOJNGC2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&amp;psc=1
Additionally, I recently tried a third hard drive, which was IDE and thus did not need an adapter. Error 13. I think we can conclude that the adapter itself is not causing this.
>But the fact that you're unable to boot with the original HDD suggests that something might be up with a PATA socket elsewhere. Inspect all of them for bent pins - especially the sockets on the DVD drive and motherboard. Also try waiting on the Xbox logo longer - it should progress (even if to an error screen) if you wait long enough. Can take up to about a half hour in some cases.
I have not been able to find any bent pins.
>Also try waiting on the Xbox logo longer - it should progress (even if to an error screen) if you wait long enough. Can take up to about a half hour in some cases.
You'd think that, but no. There have been times when I've left the Xbox on that screen for quite a while. Nothing ever happens, except the screen dims a little bit early on. In fact, it's on that screen as we speak. Been there for 10 minutes. I won't touch it for the next hour just so we have definitive data on that point.
>Also check that your HDDs (and adapter if present) are each jumpered as master.
They are. And I have previously tried all the settings on each hard drive, including cable select.
I'm sure this would all turn out fine if I could just get something to boot. The guy in the video (linked in OP) does it. He gets error 13, puts in a Hexen disc, turns it off and on again, and boots fine. I don't understand why I can't do that.
> This is the adapter I'm using: https://www.amazon.com/gp/product/B00EOJNGC2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&amp;psc=1
Excellent, those red StarTechs are much more reliable.
> I'm sure this would all turn out fine if I could just get something to boot.
I suppose the question is, is there anything of value to you that's currently only stored on the original HDD?
If you mean for the iPod Classic 1/2, I've seen people have success with these: Digigear SDXCF SD SDHC SDXC to CF Type II Extreme/Ultimate Compact Flash Card Adapter, Note Not for CF Type One Slot https://www.amazon.com/dp/B00EPMWT1M/ref=cm_sw_r_cp_api_.2FZxb1B41WRQ
You're probably not going to have much luck fitting the SATA drive into the device, even if you can find the right series of adapters.
&#x200B;
I would suggest replacing the drive with an SD card in an SD-CF adapter into a CF to 1.8 IDE adapter. What you have is the same kind of drive used in the old iPods, so there's actually some demand out there for adapters for that interface. Readily sold online, even on Amazon.
&#x200B;
CF to 50-pin 1.8 IDE
SD card to CF
&#x200B;
And of course you'll need an SD card, but probably best to find one around the size of the old drive, like a 32GB or so.
That's why I've had to use SD cards in an adapter in Slot B. It's an extra step, but it actually hasn't caused me any trouble (to my surprise). I got an SD to CF adaptor and use the Apple branded SD to iPhone card reader.
I have one of these in all of my cameras.
And then I pop the card out and into one of these.
&#x200B;
This has been 100 percent reliable for four years, and the best way I've found to move only selected photos from my camera to my phone on the fly.
One nice benefit to running an SD card in one slot has been how cheap giant SD cards are, too. When I'm on assignments where I do video it's nice to have a giant backup available.
There are CF to SD card adapters. Keep the cards under 4GB to be safe.
http://www.amazon.com/Digigear-SDHC-SDXC-Ultimate-Adapter/dp/B00EPMWT1M/ref=sr_1_1?s=electronics&amp;ie=UTF8&amp;qid=1419701787&amp;sr=1-1&amp;keywords=cf+sd+adapter
Just a few weeks ago I modded my BW iPod 4th Gen. I used this SD to CF adapter, and this CF to IDE adapter. Sadly, it looks like it's out of stock. The one that the other person linked looks good. Always read the reviews.
I also recommend checking out this thread over at MacRumors. It has a lot of invaluable information about this mod. OP did it with a photo, but many others have done it with BW 4th gens, and there are even a few third gens. Reading through it gives you an idea of the issues other people have run into and how to fix them. Also a good place to go if you run into issues.
Best of luck to you! Let me know if you have any questions.
CF to 1.8 adapter
QNINE CF Card to 1.8" IDE Adapter Converter, Compact Flash Memory Disk Replacement for Toshiba 1.8 Inch PATA HDD https://www.amazon.com/dp/B01MXXAHMY/ref=cm_sw_r_cp_api_UNjOAbKX88CR0
CF adapter to SD card
Digigear SDXCF SD SDHC SDXC to CF Type II Extreme/Ultimate Compact Flash Card Adapter, Note Not for CF Type One Slot https://www.amazon.com/dp/B00EPMWT1M/ref=cm_sw_r_cp_api_DOjOAbKKRFGYN
I just did this very same mod about a half hour ago and it went great! iTunes was able to detect and restore the iPod, and I'm currently uploading music now
Wouldn't have the advantages of CF cards.
>Compact Flash allows for transferring large blocks of data all at once. Useful for video or high MP cameras.
>The highest end cards can transfer data at 167 MB/s
>Compact Flash cards were built from the ATA standard for hard drives, so they can be used to replace disks in computers and store data in FAT16 or NTFS.
>The basis of Compact Flash is about five years older than SD technology.
I use this CF to SD adapter in my 40D just fine if you need a recommendation.
I have seen reports of a CF to SD working on most camera, I have one coming from Amazon im going to throw in my 7d. The only issue I would forsee is the 64gb wall in a few scenarios like firmware upgrades.
The 7D is indeed CF only.
This is the one I ordered.
I would check and make sure your CF card to 1.8 IDE adapter pins are lined up correctly if they are it could be a problem with your CF to SD card adapter. I had a problem similar to what you are having and the issue was that the CF to SD card adapter was garbage. This is the adapter that has worked perfectly in a 3rd Gen 128gb conversion and also a 4th Gen 128 gb conversion I've done.
https://www.amazon.com/gp/aw/d/B00EPMWT1M/ref=mp_s_a_1_2?ie=UTF8&amp;qid=1518153953&amp;sr=8-2&amp;pi=AC_SX236_SY340_FMwebp_QL65&amp;keywords=cf+to+sd+adapter&amp;dpPl=1&amp;dpID=41iymAmGd7L&amp;ref=plSrch
I'm on my phone please forgive the formatting I'm lazy.
https://www.amazon.com/gp/aw/d/B00EPMWT1M?psc=1&amp;ref=ppx_pop_mob_b_pd_title
This adapter works seamlessly on my d200 and d300
There are sdhc card adapters that are stubby.
https://www.amazon.com/Shortening-microSD-Raspberry-Pi-Macbooks/dp/B00HV4YFYU/ref=sr_1_2?ie=UTF8&amp;qid=1474772422&amp;sr=8-2&amp;keywords=short+micro+sd
I got this one, it works ok. I think you could shave 2mm off the end too.
Seems the best bet would either be JetDrive Lite, or buying a MicroSD card with a shortened adapter such as:
http://www.amazon.com/Shortening-microSD-Raspberry-Pi-Macbooks/dp/B00HV4YFYU/ref=pd_sim_147_2?ie=UTF8&amp;dpID=51kTBm29i3L&amp;dpSrc=sims&amp;preST=_AC_UL160_SR160%2C160_&amp;refRID=18EPQ860C7389499MVG2
But if anyone has any other SD cards that sits flush I'm interested as well.
Perhaps something like this:
https://www.amazon.com/Adafruit-Shortening-microSD-Raspberry-Macbooks/dp/B00HV4YFYU/ref=pd_sbs_147_1?_encoding=UTF8&amp;psc=1&amp;refRID=1W0MGW803XVEE9YYAH4Z
Thanks for reminding me, I've been meaning to look for something exactly like this for my Asus C202.
I use this one with a 64GB PNY microsd and I have noticed no performance hits over a normal SD card. I have a CB3-111 if that makes any difference.
http://www.amazon.com/Shortening-microSD-Raspberry-Pi-Macbooks/dp/B00HV4YFYU/ref=sr_1_sc_1?s=pc&amp;ie=UTF8&amp;qid=1453807412&amp;sr=1-1-spell&amp;keywords=half+sized+sd+card+adapter
9mm sd card? Thats quite a bit smaller than a micro sd card, definitely not what youre looking for. I believe youre looking for something like this. Its made for raspberry pis but should work for your case.
https://www.amazon.com/Shortening-microSD-Raspberry-Pi-Macbooks/dp/B00HV4YFYU
Actually.
There is one way to "extend" it.
You need a shortened SD card adapter. Then take it from there.
I use this one on my 9350 and it is completely flush:
https://www.amazon.com/gp/product/B00HV4YFYU
I use this in my 9550. It goes in a little PAST flush, but I looped a piece of clear tape on it to create a flexible pull tab. I've used it for a little over a year now with no issues. I carry the laptop daily so it gets pulled in and out of my backpack daily.
https://www.amazon.com/gp/product/B00HV4YFYU/ref=oh_aui_detailpage_o00_s00?ie=UTF8&amp;psc=1
Here is the mobile version of your link
I have been looking at the JetDrives by Transcend.
These two are available, but I don't know which one would fit in the Acer C720 SD card slot:
JetDrive 330 - http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS64GJDL330/dp/B00K73NSXQ
JetDrive 350 - http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS64GJDL350/dp/B00K73NT3A
I am eager to purchase one of these so I can install and configure Crouton to run Android Studio. Does anyone know if these would fit in the Acer C720?
Thanks!
http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS64GJDL330/dp/B00K73NSXQ
Says read:95, write: 60
I have no complaints. It works as I expect it to.
Plays great, I have no problem with minecraft, on the mac and windows side.
Id splurge and get the 256 gb version with one of these.
http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS64GJDL330/dp/B00K73NSXQ/ref=pd_sim_pc_5?ie=UTF8&amp;refRID=0WBB31V2YX75PW2XYSXT
Leaves the SSD for important things and the SD reader for media content.
8gbs ram is plenty.
I purchased one of these SD cards in addition to one of those low-profile USB dongles:
http://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS64GJDL330/dp/B00K73NSXQ/ref=cm_cd_ql_qh_dp_t
Reviews seem to suggest it fits pretty flush in the c720.
You can always get an SD card.
These are made to sit flush with the edge of the MacBook.
I imagine, if I need more space, this will be an easy way to do so.
you can find one with good reviews here.
I have a few friends who've tried this storage card. It's good for music and movies and it's pretty unnoticeable if you want to keep it in there.
2015 13" MacBook Pro.
Plenty powerful for day to day, nice screen, decent battery life, 3-4 years of life in it even as a base model.
One thing to know - refurbished models from Apple are like new. Think you can get it for $1,100. Yep - http://www.apple.com/shop/product/FF839/refurbished-133-inch-macbook-pro-27ghz-dual-core-intel-i5-with-retina-display
One thing to note - they only have 128 GB of storage. But there are several add ons out there that sit in the SD card slot and add storage to your computer. https://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS128GJDL330/dp/B00MTHLURE/ref=sr_1_2?ie=UTF8&amp;qid=1484262147&amp;sr=8-2&amp;keywords=Transcend+jetdrive+lite
You really can't go wrong with any of them - but this model is a good "starter" Mac that gets a lot of people to join the dark, I mean, good side. Even if you got that model used from eBay or even Gazelle or Swappa I'd still recommend this model.
Transcend 128GB JetDrive Lite 330 Storage Expansion Card for 13-Inch MacBook Pro with Retina Display (TS128GJDL330)
PNY used to make similar (Storedge) and I have two for my old MacBook Air, it's a lot slimmer than even the small USB drives. Just check if it fits your model/year.
Sorry to say but there aren't any kits out there to upgrade the 2015 model. Look here for more details
> Newer-generation 13″ and 15″ Retina MacBook Pros use newer SSDs with faster PCIe connectors. As of early 2015, no third-party SSDs are compatible with this standard, but we’re expecting to see options hit the market closer to the middle of the year. Some Retina MacBook Pro SSDs will apparently be capable of achieving speeds in the 1.2GB/second range, compared with the 700-800MB/second speeds of stock drives.
Edit: My bad I didn't see that that post was so old that i linked. Here is a nice one.
You could upgrade it by an SD card like I did. Jetdrive by transcend has a good price on theirs. They even have a 256 option now. I have no problems with it. I just put my big files on there like Photos library etc.
There are other storage options instead of external drives too. Like putting one these in the SD Card slot. They're specifically designed to sit flush inside.
Some manufacturers make SDXC cards that are flush with the side of the laptop. There are plenty more models than just that one, so shop around. This is a good solution if you don't otherwise use your SD reader.
If you are worried about space, most of my stuff is in the "cloud" these days between dropbox, and iTunes match. I just don't keep a ton of media on my machine. That I do keep is on one of these.
http://www.amazon.com/Transcend-JetDrive-Expansion-13-Inch-TS128GJDL330/dp/B00MTHLURE/ref=pd_sim_pc_2?ie=UTF8&amp;refRID=141JSDJ7DD7D00RD9HBB
These are pretty sweet.
No one here seems to have actually read your post.
Replacing the SSD in a 2012 rMBP isn't an easy swap, and most importantly, NOT COMPATIBLE with a standard laptop SSD or HDD drive, but there are some products out there to upgrade it: http://www.amazon.com/Transcend-JetDrive-Upgrade-Macbook-display/dp/B00JKCHMP0
Also, as another poster pointed out, the JetDrive Lite is really good for offloading less intensive stuff such as media and freeing up more space on the SSD: http://www.amazon.com/gp/product/B00MTHLURE
Edit: Also, I wouldn't trust that store. Not only is that price incredibly low for even a standard 1TB laptop drive, but it's nowhere near the price for the appropriate SSD replacement you'd need for a rMBP, which to me says they don't know what they're talking about.
Get one of these flush mount SD cards and add 128GB of storage. It's not super fast but it's good enough for the music and other media type stuff. Only about $74.
Retina 13" version
Air 13" version
It's a little more than you might spend for it on eBay or Craigslist, but newegg.com is a reputable site, and you won't have the hassle of dealing with scammers or anything along those lines.
As for wether or not it would be a good upgrade, across the board the answer is yes, with the exception of storage capacity. That said, the SSD will be a much faster internal storage, and if you need more storage, you can always add something like this to your SD card slot.
It will be more than capable of editing HD videos, and should even handle smaller 4k videos just fine. If your budget is under $1,000, this wouldn't be a bad machine to buy.
That said, have you considered looking into selling your current machine and maybe going for something a little newer?
Go for the 512GB version + you can extend the Storage with this memory card: http://www.amazon.de/dp/B00MTHLURE
It does not stick out of the case.
I use ist to store my iTunes library on it. When on the go I use Spotify or iTunes Match, so no need to carry around my lossless files.
I would recommend an SD card that's sits flush with the MacBook Pro, you can get up to 128gb. Make sure you pick the MacBook you have. Link below. I have one of these. Not the fastest drive to write to but has good read speeds. I just store pictures, music and films on it. Things that's just stay on my Mac at all times
Transcend JetDrive Lite 330 128 GB Storage Expansion Card https://www.amazon.co.uk/dp/B00MTHLURE/ref=cm_sw_r_awd_hgCgvb1WEQKFF
https://www.amazon.co.uk/dp/B00MTHLURE/ref=cm_sw_r_awd_hgCgvb1WEQKFF
One option is this
It allows you to add a micro sd card and it fits flush to the side of your laptop.
I use one with several 128GB cards, and drop all my work, large files etc on there.
Ok, so I figured out a damn too easy way to solve this in case anyone gets this same error or just weird behaviour as I had...
How to solve this? I reinstalled Sierra on top of my Sierra...
Yes. All that overthinking and extra engineered solutions in Terminal and just a few clicks away was the solution... I downloaded the Sierra install, went thru it and after it spent like 30 minutes or so installing, everything was just working perfect. Icons fixed, GetInfo permitted to change default program without going to beachball and the recovery partition got recreated.
One error I had is that I have a BASEQI Aluminum microSD Adapter for MacBook with a 256GB microSD card that was holding some samples and plugins. When I went to verify that it had the contents wiped out but I just launched the plugin downloader and it is re-downloading those libraries in the same installation path (no need to redo the path, it was there).
So if you get errors in macOS, specially after a migration/clone to a new bigger SSD or similar, just reinstall the same macOS you have (if you want to keep that same OS) once you are in your new drive. When you do this, unplug any other mass storage device just in case macOS decides to wipe it out.
This is what I bought, 200GB Sandisk microsd:
http://www.amazon.com/gp/product/B00V62XBQQ?keywords=sandisk%20200gb%20micro%20sd&amp;qid=1453588861&amp;ref_=sr_1_1&amp;sr=8-1
and matched it with this to insert it in the SB:
http://www.amazon.com/gp/product/B00WQVK754?psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o04_s00
i paired one of these:
http://www.amazon.com/BASEQI-aluminum-microSD-Adapter-MacBook/dp/B012F8ALBC?ie=UTF8&amp;psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o02_s00
with one of these:
http://www.amazon.com/Samsung-128GB-Adapter-MB-MP128DA-AM/dp/B00P3NMVVU?ie=UTF8&amp;psc=1&amp;redirect=true&amp;ref_=oh_aui_detailpage_o02_s00
the write performance cant compare to a PCIe SSD, but the read is terrific. i highly recommend it.
No matter what size you get... it's not going to be enough. I have 256 on mine and I have a 16GB iPhone. I had to remove an app in order to update to iOS 13. I bought an iXpand drive for it and I remove apps I don't use.
You can get a VERY small microSD or USB that can hold up to 1T.
one of these (might not fit YOUR MBP) might work.
https://www.amazon.com/FBA_iSDA504ASV-aluminum-microSD-Adapter-MacBook/dp/B012F8ALBC/ref=asc_df_B012F8ALBC/?tag=hyprod-20&amp;linkCode=df0&amp;hvadid=309773039951&amp;hvpos=1o1&amp;hvnetw=g&amp;hvrand=2231327707115226734&amp;hvpone=&amp;hvptwo=&amp;hvqmt=&amp;hvdev=c&amp;hvdvcmdl=&amp;hvlocint=&amp;hvlocphy=9032529&amp;hvtargid=pla-305648166360&amp;psc=1
There's the new micro USB where it barely sticks out of the USB slot.
There's also iCloud and personal iCloud which is like a micro WiFi setup.
I even saw a USB stick sized device with WiFi built in.
Plenty of options.
You just need to make sure it has enough for the base stuff you need. My 16GB iPhone is tough and I wish it had more, but I make it work and I understand Apple is changing things so that you have more storage options. I don't remember what the new option is, but there's quite a few now.
My version of the MBP has the SD slot, so I can get all the microSD cards I want and swap them out as needed.
here you go quick sample on amazon
https://www.amazon.com/Transcend-JetDrive-Storage-Expansion-TS256GJDL360/dp/B00WGARJGU/ref=sr_1_7?ie=UTF8&qid=1539664291&sr=8-7&keywords=macbook+air+sd+drive
&#x200B;
or
https://www.amazon.com/FBA_iSDA504ASV-aluminum-microSD-Adapter-MacBook/dp/B012F8ALBC/ref=pd_sbs_147_1?_encoding=UTF8&pd_rd_i=B012F8ALBC&pd_rd_r=611b1244-d0fc-11e8-9fea-e722222b4194&pd_rd_w=8iqGL&pd_rd_wg=zqpYE&pf_rd_i=desktop-dp-sims&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=7d5d9c3c-5e01-44ac-97fd-261afd40b865&pf_rd_r=ZH9CF4CA231WH7MG0MA8&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&psc=1&refRID=ZH9CF4CA231WH7MG0MA8
&#x200B;
lots of alternatives just search for Macbook Air SD Drive Adaptor
&#x200B;
The one i used was completely flush and allowed my to add my own SD card
&#x200B;
Just make sure its for your modle (to get flush), also some report issues with sleep , never had the issue but i only used it to store movies, dropbox (or what ever i was using at the time .. this was 2013), games (Steam I think) and iTunes
&#x200B;
advantage is that you always have it with you, also u might be able to encrypt it so that data protection can be taken care off
&#x200B;
YMMV
&#x200B;
&#x200B;
&#x200B;
&#x200B;
If it helps I use this in my MBPr with a 128gb micro SD card, flash storage has gotten bigger and cheaper since I got it but haven't had the need to update. It also sits flush in the SD port so you don't notice it and it was a great way to increase my storage by 50%.
https://www.amazon.co.uk/dp/B012F8ALBC/ref=cm_sw_r_cp_apa_R0i.Bb96952R8
Typing is easy but its Def smaller than reg keyboard
Battery life is phenomenal, I've watch Hulu on it for 9 hrs
If u plan on using the SD card slot I recommend this adapter other wise the SD card will stick halfway out
BASEQI FBA_iSDA504ASV aluminum microSD Adapter works with MacBook Pro 15" Retina (Late 2013 onwards) https://www.amazon.com/dp/B012F8ALBC/ref=cm_sw_r_cp_apa_i_2mS3CbKAD7GAV
I have a microSD adapter in mine for additional/slower internal storage, similar to this one:
https://www.amazon.com/FBA_iSDA504ASV-aluminum-microSD-Adapter-MacBook/dp/B012F8ALBC
Amazon search revealed this https://www.amazon.com/dp/B017IM54GM/
Edit: not what you are looking for. I doubt such a thing exists, at least not that i can find
The only thing that differs these adapters is built-in VRM module which is required when the adapter has more than 1 M.2 port or if source power isn't 3.3v
Most modules are fine but 3 is on the borderline,
The bad reviews are probably people who purchased before looking into their motherboard support
In your case if you have a graphics card in first x16 slot then the second one will run @ 2.0 x2 which is horribly limited
I don't advise to install any more NVMe into this motherboard as the PCIe lanes is limited, sata has no issues but cables
You can also use built-in sata controller to minus cables This, there is controller overhead + bus limit which gets you around 400MB/s sata performance
Bottom line :
Here it is:
https://www.amazon.com/dp/B01AT7ECA2/ref=cm_sw_r_cp_apa_K8yGAbRBQXZ7H
I really like how it sits flush and looks to match the rest of the magnesium body of the base.
I'd go with the i7. It is nearly twice as fast, because it is an 8th gen CPU. (5000 benchmark v. 9000 benchmark) and I think you'll encounter better battery life on it as well.
You can always opt for a 128gb microSD and the adapter it needs to expand storage for about $70.
https://www.amazon.com/Aluminum-MicroSD-Adapter-Microsoft-Model-350A/dp/B01AT7ECA2/ref=sr_1_fkmr0_1?ie=UTF8&amp;qid=1524737457&amp;sr=8-1-fkmr0&amp;keywords=baseqi+surface+book+2
It is important to note that a full size sd card will stick out so if you are going to leave it in at all times you might want to look into getting this and a micro SD card https://www.amazon.com/BASEQI-Aluminum-MicroSD-Adapter-Microsoft/dp/B01AT7ECA2
micro SD adapter that sits flush with the edge of the base.
http://www.amazon.com/BASEQI-Aluminum-MicroSD-Adapter-Microsoft/dp/B01AT7ECA2
BASEQI makes one here. I have bought one and the flush mount looks perfect.
Lucky you! Mine is currently being held hostage at my local post office, because of course it arrives in town on a holiday! For the screen protector I’d recommend a Zagg. That’s what I’ve had on my surface pro 4 for the last few years and it’s great. I’ve got one sitting at home waiting to be put on my surface book 2 once it gets here. And if you’re wantinf to get a Micro sd card I’ve heard really good things about these https://www.amazon.com/dp/B01AT7ECA2/ref=cm_sw_r_cp_api_KGvJBbPK46YDP
They’re nice because they sit flush with the side of the surface book and they match the silver aesthetic. The one I linked to is for the 13.5 inch though, so just change it over to the 15 inch model
Definitely this: BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book & Surface Book 2 13.5" (Model-350A) https://www.amazon.com/dp/B01AT7ECA2/ref=cm_sw_r_cp_tai_TieJBb6V3SQ2Q
This sleeve is nice, especially for only $20: tomtoc 360° Protective 13-13.5 Inch Laptop Sleeve Compatible with Microsoft 13.5" Surface Book | 13.5" Surface Laptop, with CornerArmor Patent & Accessory Pocket https://www.amazon.com/dp/B079ZP2R8M/ref=cm_sw_r_cp_tai_vjeJBb1973D3C
Optional - for protecting the Surface Pen tip: Surface Pen Tip Cover Case,Teyomi Protective Shockproof Replacement Surface Pen Tip Cover Case Skin For Microsoft Surface Pen (Surface Pen Tip Cover) https://www.amazon.com/dp/B07FGD9CZ3/ref=cm_sw_r_cp_tai_7jeJBbG2B4QQX
Annnnnd this. I recommend this. Cheap... and it works well: https://www.bestbuy.com/site/insignia-type-c-wall-charger-black/5880500.p?skuId=5880500
The Ars Technica review provides a more detailed overview, and I agree with their findings: http://arstechnica.com/gadgets/2016/11/surface-book-with-performance-base-a-lot-more-graphics-in-a-little-more-weight/ . The 965m is a massive step up from the original ~940m.
In short: The tablet portion is identical, battery life improved, no throttling, improved cooling to accommodate the 965m, fan noise slightly louder (but nothing unusual for ultrabooks).
One observation that I had is that the slightly heavier (and thicker) base also improves on the balance of the whole system. It doesn't feel like it wants to topple backwards as often when its in my lap.
Also: If you had a flush mount microSD adapter, I can confirm that it fits in the new base.
Here is a microSD converter that has reviews that say it doesn't protrude that much.
I use this -> https://www.amazon.com/Aluminum-MicroSD-Adapter-Microsoft-Model-350A/dp/B01AT7ECA2 together with a Samsung 128gb card as Steam Lib on my surface book2 now for over 18 months no problem, on the Surface pro nothing will stick out so you will not have any trouble
of course as always since its no raid or such don't use it for super important data you can't afford to lose without some kind of backup solution
I have the surface book and have had it for over a year.
I have the first generation i7, 256gb 8gb ram, iGPU
Lightroom + Smartpreviews works beautifully.
There are few quirks which might be addressed in the new generation. The USB3 ports can cause interference with the Wifi if the dongle/flashdrive is unshielded. The USB ports are also underpowered and struggle to run some portable hard-drives (in my case an SSD in a 3rd party enclosure) Both of these problems can be fixed using a hub and a USB3 y cable.
The internal storage was the biggest problem for me initially but has been mostly solved by using this a MicroSD Adaptor that sits flush in the base also sometimes the screen detachs if I sneeze or jar it in a similar way and takes a second before I can use the keyboard again.
Despite the above issues I am very happy with the device. The dock works great and computer is a pleasure to use as both a laptop and a tablet. I work on it, play games on it, read comics on it and if it broke today I would go out and buy it again.
MicroSD Adaptor - https://www.amazon.com/BASEQI-Aluminum-MicroSD-Adapter-Microsoft/dp/B01AT7ECA2/ref=sr_1_7?s=pc&amp;ie=UTF8&amp;qid=1481048056&amp;sr=1-7&amp;keywords=surface+book
Something like this?: BASEQI Aluminum MicroSD Adapter for Microsoft Surface Book & Surface Book 2 13.5" (Model-350A) https://www.amazon.com/dp/B01AT7ECA2/
I've got the 256gb one but I found it not to be big enough so I got one of these:
BASEQI Aluminum MicroSD Adapter... https://www.amazon.co.uk/dp/B01AT7ECA2?ref=ppx_pop_mob_ap_share
It sits flush with the side of the base and I've put a 400gb micro SD in it. It's great and I've had no issues with it.
I don't really play games on my computer, mostly just Civ, so it's one of the few games I have installed on the SSD. I actually just ordered the BaseQi microSD card adapter so the memory card will sit flush in the SB for more semi-permanent capacity. I'll just be using my memory card for regular files like documents and photos.
Programs that depend on fast read/writes, like games or photo/video editors or whatever, I plan to put right on the main SSD.
edit: Scratch that, I'll probably also put some emulators on the SSD, but I can put the games on the memory card, even if the read speed is slower than the SSD. It'll be easier that way to balance storage and performance, and it'll still be way faster than if I were using the original CDs/DVDs games would have come on.
One more thought: If you made one of the cartridges a flip up cover, you could use one of these for your root disk and have the full sized SD card slot available from the outside, just like a floppy or cartridge on an old micro.
I just used the extender/adapter from Amazon Lenink Micro SD to SD Card Extension Cable Adapter Flexible Extender SD/RS-MMC/SDHC/MMC Compatible with GPS,3D Printer,Raspberry Pi,TV,DVD https://www.amazon.com/dp/B06X3Y4BBB/ref=cm_sw_r_cp_apa_i_zMMzDbWTG4C86
https://www.amazon.com/dp/B06X3Y4BBB/ref=cm_sw_r_cp_awdb_t1_ZfCUAb2YYV184
That's what I found. No idea if it's any good but people seem to like them for 3d printers
A Pandora battery is for if you accidentally screw up your system you can enter the system service mode so unless you have an issue there's really no point, plus they can be a little hard to find. In term of how to hack it if you want a permanent custom firmware use this method https://www.youtube.com/watch?v=FZB7MQCeKkU
For games once you install the custom firmware you can change the usb settings to ISO in the custom firmware menu and actually rip you games you have into files to keep on the system storage. In terms of storage get this adapter and a micro SD card https://www.amazon.com/UCEC-Micro-Memory-Stick-Adapter/dp/B06XHPS43Q/ref=sr_1_2_sspa?crid=BMM31ZM4XBBC&keywords=psp+memory+stick+adapter&qid=1550845163&s=electronics&sprefix=psp+memory+stick+adap%2Celectronics%2C140&sr=1-2-spons&psc=1 64 GB should be more than enough, just make sure you get a class 10 card for write speed purposes.
In terms of where to get some ISOs you can use https://romsmania.cc (just be careful which download button you are hitting)
Finally in terms of emulators try Wololo.net (again just be careful which download you hit, if you are not sure which one try hitting Ctrl + F and type download in the bar it will show you the downloads that are actual text on the page)
With all of that you should be good to go, just remember some psp games will require you to change the type of driver to play but they are all included in the custom firmware so its just a matter of hitting select and choosing the right driver.
lol, I actually prepared one just in case you'd need it
https://www.amazon.com/SANOXY-MicroSD-Converts-MicroSDHC-Packaged/dp/B00B6DYDZS
https://www.amazon.com/dp/B06XHPS43Q/ref=sspa_dk_detail_6?psc=1&amp;pd_rd_i=B06XHPS43Q&amp;pf_rd_m=ATVPDKIKX0DER&amp;pf_rd_p=f52e26da-1287-4616-824b-efc564ff75a4&amp;pf_rd_r=F0DB3ZGWA0MRS7X4M54Y&amp;pd_rd_wg=rfRaM&amp;pf_rd_s=desktop-dp-sims&amp;pf_rd_t=40701&amp;pd_rd_w=JSrHR&amp;pf_rd_i=desktop-dp-sims&amp;pd_rd_r=65ffe2fc-c736-11e8-8198-7d964bea5356
Here's one for $6 with free shipping on Amazon Prime. It only takes one micro SD card, but that should be all you need based on your post.
I have this $8 one that uses two micro SD cards, but I haven't come anywhere close to actually needing the second card (I think I've used about 8 GB and have two 64 GB cards in it).
These cards can sometimes be cheaply made and fall apart, but if you're not switching it in and out all the time, that shouldn't really matter much.
Walmart’s website sells new batteries for 12~15.
The out cable can be a trick to find, but amazon is probably the way to go. Also for the memory card, buy a dual SD card one. 128 is super cheap these days and you could fit the majority of PSP games on it.
Adapter like this:
UCEC Dual Slot Micro SD/SDHC to Memory Stick Pro Duo Adapter for PSP Sony https://www.amazon.com/dp/B06XHPS43Q/ref=cm_sw_r_cp_api_i_nT9TCb8P06679
Cable:
ElementDigital PSP AV Cable Component for PSP 3000 3001 & PSP 2000 Full Audio Video Output and Games on TV 5ft (PSP AV Cable) https://www.amazon.com/dp/B071ZGC6HY/ref=cm_sw_r_cp_api_i_9T9TCbGK3T78B
Battery:
https://www.walmart.com/ip/3-6V-3600mah-Rechargeable-Battery-for-Sony-PSP-110-PSP-1001-PSP-1000-FAT-US/133607499
I really like my GO for travel, but M2 sucks and the 3000 is really a much better gaming experience. The chiclet buttons on the GO kind of suck and if you have normal human-sized hands, it's hard to hold. With softmods and CFW, you can do a non-permanent on just about any motherboard now. 3000 was three steps or so. Easy. There's no weird storage splitting (GO has onboard and M2) so you don't have to move around your saves or plugins. With a 3000, you can get dual and single memory card adapters. I have both and they work. You can go up to 128gb now, I think, but it's slow if you go that high. 32gb is easy and fast.
3000 has fewer emulation issues. I find that my GO has dumb random bullshit that for some reason crashes the unit with some SNES games. Even scrolling in the menu causes crashes ONLY on the GO.
IMHO, 2000 is best, but 1000 feels best in my hands. 3000 is okay, GO is really great for travel because it's so compact.
If you have open pcie slots you can get an adapter to run nvme through a slot. The nvme interface on the motherboard is just a special pcie connector.
&#x200B;
You can get a board for about $15 that will let you mount nvme drives in a pcie 8x or 16x slot.
&#x200B;
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y
As an aside, you can buy adapters from nvme to pcie. Some older motherboards won't allow it as a boot drive unless you modify the bios (there are guides online how to do it).
Edit: replied to wrong post, sorry ><
You could use a PCIe adapter but the disk won't work at its full speed, since the XPS 8300 has only one x16 PCIe slot which I guess it is occupied by a graphics card (the rest PCIe slots are x1).
You could try an nvme pcie adapter. (I've never used one, but as far as I can tell they work just as well).
This link is just the first one that came up on a Google search.
QNINE NVME PCIe Adapter, M.2 NVME SSD to PCI Express 3.0 Host Controller Expansion Card with Low Profile Bracket, PCIe NVME Adapter for PC Desktop, Support 2230 2242 2260 2280 https://www.amazon.com/dp/B075MDH28Y/ref=cm_sw_r_cp_apa_i_N7DCDbF26FFER
You can use m.2 nvme ssd pcie adapter or use usb 3.0/usb type c nvme ssd adapter
QNINE NVME PCIe Adapter, M.2 NVME SSD to PCI Express 3.0 Host Controller Expansion Card with Low Profile Bracket, PCIe NVME Adapter for PC Desktop, Support 2230 2242 2260 2280
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y
UGREEN M.2 SSD Enclosure USB C to NVMe PCI Express Adapter Aluminum USB 3.1 Type C Gen 2 10Gbps to M-Key Hard Drive Caddy External Case for 2230/2242/2260/2280 Support UASP, Tool-Free
https://www.amazon.com/UGREEN-Enclosure-Aluminum-External-Tool-Free/dp/B07NPFV21K
Chief, I have my 860 ($127) order on backorder from B&H, so plenty of time to cancel the order.
&#x200B;
Should I get this 960gb for $155, and purchase this adapter to use with my currently old PC? I am not sure if I have any open PCIE slots after I install the new video card, so would I be able to stick in the PCIE adapter into a regular PCI slot? I don't mind the slower speeds, as long as it's just as fast as SATA.
EDIT: After doing some research, a PCIE adapter would not be compatible with PCI.
Hmm, not sure how I can guarantee the 8200 will work in my case, then.
Hey! Thanks for the reply. Is this one alright?
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y/ref=sr_1_4?s=pc&amp;ie=UTF8&amp;qid=1543378990&amp;sr=1-4&amp;keywords=nvme+adapter&amp;refinements=p_72%3A1248879011
What? Why would you use a USB3->SATA adapter? The NAS case is meant for people connecting SATA based drives with the use of a PCIe controller card.
If you want to connect up a straight NVMe drive you'll need to buy a separate PCIe->NVMe adapter and work that out on your own.
If you're simply interested in just having an NVMe drive consider the NanoPC-T4. It's slightly more expensive due to the builtin wifi and 16GB onboard eMMC (no SD card needed), but the NVMe SSD will then mount smartly to the bottom of the board without hassle.
Yep, you can fit a PCIe SSD (also known as NVME) of any capacity. Since you only have 1 M.2 slot, you'll need to have a PCIe adapter if you want to clone your 128GB SSD onto the new one. Alternately, you can re-install Windows 10 and all of your software on your new drive.
As u/bennyblanco2121 said you can also keep your M.2 128GB drive and get a 2.5" SATA SSD. The speed difference between PCIe and SATA SSD isn't really significant for things like booting or starting programs. It's more obvious when copying large individual files.
I had the same problem with my old Asus Maximus VI Gene.
The m.2 slot on these boards is an adaptor that fits next to the rear sockets. (mPCIe Combo III, top left on the pic below)
https://dlcdnimgs.asus.com/websites/global/products/cc5990tdPiScUKzO/img/top_1.jpg
Fitting a longer SSD in there will hit the MOSFET heatsink.
Your best bet would be to find a PCIe-m.2 adaptor card
You might not be able to boot from an SSD fitted that way, but you will be able to use it as storage.
This is the closest thing I've found for NVMe. As far as I know, NVMe cannot be converted to USB due to it using PCIe rather than SATA.
https://www.amazon.com/Samsung-970-EVO-Plus-MZ-V7S250B/dp/B07MG119KG/ref=sr_1_2?keywords=960+evo+plus&amp;qid=1573081267&amp;sr=8-2
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y
Just a suggestion, you could also drop in an NVMe PCIe card with an NVMe SSD, which would give you more performance than the SATA based drives.
Example:
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y
You don't need to get a new motherboard, you could get an NVME PCIE adapter to run at full speed (https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y). Most M.2 ssds will work with your motherboard, you just wont be able to get the full speed out of them. And M.2 SATA and M.2 NVME are different things, this drive is an NVME drive.
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y
would something like that work for you?
If my mobo is old and doesn't have M.2 NVMe I should be able to use this to get the same speeds, correct?
https://www.amazon.com/QNINE-Adapter-Express-Controller-Expansion/dp/B075MDH28Y
im on windows 10 pro. this is the adapter
https://www.amazon.com/gp/product/B075MDH28Y/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&amp;psc=1
Hello I am new to Vita homebrew stuff, I am planning on buying a blue vita from amazon and I really don't want to buy an 100 dollar memory card because that's... uh, ridiculous.
Can I buy one of these would I be able to install games on there?
Not sure about shipping, but this one is the one I got a few weeks ago and works great.
I'd just search for that brand around ebay too. The 5.0 is the one you'll want so it isn't sticking out of the slot so much that it keeps the protective cover open.
XBERSTAR Newest Version 5.0 SD2Vita PS Vita Micro SD Memory Card Adapter Fast Loading for PSV Game 1000/2000 3.60 System https://www.amazon.com/dp/B0798JJ82Z/ref=cm_sw_r_cp_apa_L9.NBbG04C6PY
where can i buy sd2vita v 5.0? Sorry if i'm asking a dumb question, because i've been out of the picture when it comes to vita hacking
edit-is this the correct product?
Buy it on Amazon around ~$9: https://www.amazon.com/gp/product/B0798JJ82Z/ref=oh_aui_detailpage_o02_s02?ie=UTF8&amp;psc=1
This one?
I soldered my own when they first came out and it works but the newer versions look super polished.
What I really want is a microSD adapter to go on sale. I have to say, I'm pretty jealous of Surface Pro devices for having microSD slots, because I haven't needed a full sized one since maybe 2009.
The link seems to have changed - even on my amazon order if I click the link in the order it takes me to the model 350A (13.5") model... but I purchased (and I'm using) the 15" version, Model 351A.
All I can think is the 15" version sold out on Amazon?
EDIT: Check this out:
https://www.amazon.com/gp/product-reviews/B0798MPVT2
Goes to reviews of the 15" version, but if you click the link you're taken to the 13.5" version.
One more link for good measure.
You may also need this: https://www.amazon.com/gp/product/B0798MPVT2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I bought it for my SB2 15", it fits perfectly. It also has the 13" model. With it I stored some movies and songs into a 256GB sandisk microSD card (https://www.amazon.com/gp/product/B0758NHWS8/ref=oh_aui_detailpage_o02_s00?ie=UTF8&th=1). Didn't use it for gaming though.
I got this adapter for mine. It is like it isn't even there.
If you need a Memory Stick with more storage and have 30 dollars left over, consider buying this 128 GB Micro SD Card at https://www.amazon.com/SanDisk-128GB-microSDXC-Memory-Adapter/dp/B073JYC4XM/ref=sr_1_2?keywords=SD+CARD+128+GB+SANDSIK&qid=1558658866&s=electronics&sr=1-2-spell (Make sure to get it shipped by Amazon and not some other retailer for maximum chance of getting an official and not counterfeit card) along with a Micro SD Card to Memory Stick Duo adaptor like https://www.amazon.com/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD/ref=sr_1_3?keywords=PSP+Memory+Stick+Adaptor&qid=1565311107&s=electronics&sr=1-3 to allow it to fit inside the PSP, and be patient while it tests your SD Card. Use h2testw to verify that the SD card is legitimate before using it in the PSP system. Counterfeit cards will show "The media is likely to be defective." on h2testw along with a large amount of bytes next to the word "DATA LOST."
You could ask a friend to help.
But you want to brave it yourself here are the links needed.
In the order in which they’d be needed.
After its done you can google psp iso/rom and add games to play.
Word of advise though. Only do this if you like messing with technology, and this kind of stuff excites you.
Samsung 128GB 100MB/s (U3) MicroSDXC Evo Select Memory Card with Adapter (MB-ME128GA/AM) https://www.amazon.com/dp/B06XWZWYVP/ref=cm_sw_r_cp_api_i_AHorDbNAJ7KNT
PSP Memory Stick Adapter, Funturbo Micro SD to Memory Stick PRO Duo MagicGate Card for Sony Playstation Portable, Camera, Handycam https://www.amazon.com/dp/B07F68FCHD/ref=cm_sw_r_cp_api_i_CForDb34RRGV4
PSP hacking how to
https://youtu.be/nROljBT2ETM
Get a memory stick adapter, format it. Then add games.
https://www.amazon.com/dp/B07F68FCHD/ref=cm_sw_r_cp_apa_i_E1y6CbJK79HW3
Mod that thing! https://youtu.be/FZB7MQCeKkU
Install emulators, game backups, and have fun!
If you don't already have a large memory card I suggest you get yourself a Micro SD adapter like this: https://www.amazon.ca/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD/ref=mp_s_a_1_1_sspa?keywords=psp+micro+sd+adapter&amp;qid=1557506685&amp;s=gateway&amp;sprefix=psp+micro+&amp;sr=8-1-spons&amp;psc=1
I recently found my old PSP 2001 and am running the latest CFW.
I'm using this exact adapter:
https://www.amazon.com/Funturbo-MagicGate-Playstation-Portable-Handycam/dp/B07F68FCHD/ref=mp_s_a_1_1?ie=UTF8&amp;qid=1549954935&amp;sr=8-1-spons&amp;pi=AC_SX236_SY340_QL65&amp;keywords=sony+memory+stick+pro+duo+to+micro+sd&amp;psc=1
Along with a 128GB SanDisk Extreme:
https://www.amazon.com/SanDisk-128GB-Extreme-microSD-Adapter/dp/B07FCMKK5X/ref=mp_s_a_1_3?ie=UTF8&amp;qid=1549955208&amp;sr=8-3&amp;pi=AC_SX236_SY340_QL65&amp;keywords=SanDisk+128gb&amp;dpPl=1&amp;dpID=41Ob2mex0pL&amp;ref=plSrch
Both have been working flawlessly for me with about 50GBs of ISOs so far and a handful of PSX games.
The only way I transfer data to it is direct. Power off the PSP completely -> remove adapter -> pull card -> insert in decent quality microSD card reader.
MiniUSB works but it's SO SLOW. About 5MBps versus 35MBps.
So this bad boy?
Edit: In the description, it says it handles up to 64gb, should I look into a different one or will it still work?
Bought this a few weeks ago and its worked flawlessly.
https://www.amazon.ca/gp/product/B07F68FCHD/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
I think its worth trying an adapter especially if you already have spare micro sd cards already. I have this one and it works well for me. Duo adapter
I also got a couple of these and the one I have tried so far worked fine as well. duo adapter from ebay
Not sure, but look at options on the HD adapter. Not sure why that one shows $250 when it's the same as this for $15:
https://www.amazon.com/Sintech-Adapter-Upgrade-2013-2016-2013-2015/dp/B07FYY3H5F
This is incorrect information. Since Mojave, you can install and boot macOS on any M.2 drive provided you have the correct adapter. Something like this.
I’d recommend staying away from OWC hardware as they are extremely overpriced, and made with cheap components that tend to fail.
I upgraded my Macbook Pro 2015 13-inch yesterday, and so far so good! No issues whatsoever, and constantly getting ~1400-1500 mb/s read/write speeds with Blackmagic.
I used the following adapter: https://www.amazon.com/dp/B07FYY3H5F/ref=cm_sw_em_r_mt_dp_U_pcWCCbZWWP20Q
You can't upgrade the RAM in a 2013 retina MBP, it's soldiered on. You should probably find one with 8GB. You can upgrade the SSD, but only with an M.2 NVME drive and adapter, like this: https://www.amazon.com/XPG-SX8200-Gen3x4-3000MB-ASX8200PNP-1TT-C/dp/B07K1HMMJC/ref=sr_1_3?keywords=500gb%2Bm.2%2Bssd%2Badata&amp;qid=1558903965&amp;s=gateway&amp;sr=8-3&amp;th=1
and
https://www.amazon.com/Sintech-Adapter-Upgrade-2013-2016-2013-2015/dp/B07FYY3H5F/ref=sr_1_3?keywords=m.2+to+apple+ssd&amp;qid=1558904010&amp;s=gateway&amp;sr=8-3
https://www.amazon.com/Sintech-Adapter-Upgrade-2013-2016-2013-2015/dp/B07FYY3H5F/ref=mp_s_a_1_3?keywords=sintech+macbook+air&amp;qid=1574554156&amp;sr=8-3
It’s listed as compatible with this adapter.
Not entirely sure what you mean. Are you referring to the cheaper adapters that short out? This is the one I am using: https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2
2015 rMBP 13" 128gb owner here. I'm a Photography student so for me the substantial upgrade in graphics performance, RAM and hard drive write speed made the upgrade a no brainer. As for storage, I was lucky and got a Transcend JetDrive 330 128gb for $100 delivered (cheap for my country's exchange rates). I'd recommend one of those because it means that multimedia like movies and music (or anything that takes up space and doesn't need fast read/write speeds) can live on the drive permanently without taking up space on the SSD, this means that in my workflow I have the ability to import an SD card or three, work on the images, export them and send them on the super fast SSD and then transfer them to my 2 2TB portable external backup drives. I'd also recommend you buy at least one external drive, I need more because of my work but it's still handy to have somewhere to dump everything you need (or don't need).
Oh, the trackpad is worth it by itself. If someone sat me down in front of the new one and the old one and asked me to choose, I'd choose the new one every time, even if it had had half the storage (because of the workaround I described).
They went from MFM ribbon to IDE ribbon and I seem to remember I had a sata 5.25" once.
There were typically three connectors on the ribbon, two for floppy drives (with a twist in it to assign one as the first) and then a connector for the board. IDE was a pin connector edge and MFM was a card edge.
There are connectors to convert IDE to sata if you go that route: https://www.amazon.com/StarTech-com-Drive-Optical-Adapter-Converter/dp/B00EOJNGC2/ref=sr_1_4?keywords=ide+to+sata+adapter&amp;qid=1570317468&amp;s=electronics&amp;sr=1-4