Best dynamics physics books according to redditors

Hey guys, this is the textbook - as you can see, it is really $950 for a used hard copy.


Reddit loves to fact-check, so I'm sure you'll find that you can buy the looseleaf version for $160, but if you check the reviews you'll see that it's been printed with no diagrams, making it almost useless (this is confirmed by someone I know irl who bought it for the course. This is also the version that our bookstore carries for $200, amazingly). You'll also see that you can buy the online version, which is nice, but for fluids you need lots of tables to use during tests and since having laptops open during tests is too much of a liability, the professor only allows hard copies of the tables for tests.


I'll be using a pdf version of the book (not one from Amazon, that's all I'll say...), and printing out the tables for the tests. If I'm not allowed to do that I'll just drop the course, because there's no way in hell I'm buying the $950 hard copy like she is pressuring.


Oh, and here are screenshots of the course syllabus showing that we do actually need the book, and yes it is only for a few weeks (4 actually, not 6 - the first 6 weeks are with another book which is sold for $215 at our bookstore)

I'm 2 years into a part time physics degree, I'm in my 40s, dropped out of schooling earlier in life.

As I'm doing this for fun whilst I also have a full time job, I thought I would list what I'm did to supplement my study preparation.

I started working through these videos - Essence of Calculus as a start over the summer study whilst I had some down time. https://www.youtube.com/playlist?list=PLZHQObOWTQDMsr9K-rj53DwVRMYO3t5Yr

Ive bought the following books in preparation for my journey and to start working through some of these during the summer prior to start

Elements of Style - A nice small cheap reference to improve my writing skills
https://www.amazon.co.uk/gp/product/020530902X/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

The Humongous Book of Trigonometry Problems https://www.amazon.co.uk/gp/product/1615641823/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Calculus: An Intuitive and Physical Approach
https://www.amazon.co.uk/gp/product/0486404536/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Trigonometry Essentials Practice Workbook
https://www.amazon.co.uk/gp/product/1477497781/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Systems of Equations: Substitution, Simultaneous, Cramer's Rule
https://www.amazon.co.uk/gp/product/1941691048/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Feynman's Tips on Physics
https://www.amazon.co.uk/gp/product/0465027970/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Exercises for the Feynman Lectures on Physics
https://www.amazon.co.uk/gp/product/0465060714/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Calculus for the Practical Man
https://www.amazon.co.uk/gp/product/1406756725/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

The Feynman Lectures on Physics (all volumes)
https://www.amazon.co.uk/gp/product/0465024939/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I found PatrickJMT helpful, more so than Khan academy, not saying is better, just that you have to find the person and resource that best suits the way your brain works.

Now I'm deep in calculus and quantum mechanics, I would say the important things are:

Algebra - practice practice practice, get good, make it smooth.

Trig - again, practice practice practice.

Try not to learn by rote, try understand the why, play with things, draw triangles and get to know the unit circle well.

Good luck, it's going to cause frustrating moments, times of doubt, long nights and early mornings, confusion, sweat and tears, but power through, keep on trucking, and you will start to see that calculus and trig are some of the most beautiful things in the world.

Nice books but i think it could be more fruitful to learn the real physics behind that (if you haven't done that already). See f.e. http://www.amazon.com/The-Feynman-Lectures-Physics-boxed/dp/0465023827/ref=sr_1_1?ie=UTF8&qid=1374676343&sr=8-1&keywords=feynman+lectures+on+physics

I know a few people who would gladly nominate this text as an arcane text that only the most dedicated of sorcerers can understand......

This was a pleasure to read.

An Introduction to Thermal Physics https://www.amazon.com/dp/0201380277/ref=cm_sw_r_cp_apa_s6BfAbNNZABF5

This is the standard undergraduate text. It's the one I used. Super easy to read and the problems are fun. Best of luck!

Get the Feynman lectures, and the Schaum physics series.

On the Schaum one, write ALL the exercises, so you actually get it.

The domain of physics is very narrow and the modern state of the field is highly specialized, so keep that in mind. If you have classical mechanics, multivariable calc, and preferably linear algebra (if not, MIT has tons of lectures online), you can start with quantum mechanics or statistical/thermal physics:

Griffith's Quantum Mechanics

Schroeder's Thermal Physics

Electromagnetism

I can't remember which physical chemistry text we used, but if you're concerned with atoms and molecules, you'll need that too. If you're concerned with nature at smaller scales, you'll need particle physics (and lots more math). Until you have a solid foundation in classical, thermal, and quantum, it's not a good idea to move on. You can't, for example, do much with quantum field theory if you don't have quantum mechanics. Both Shankar's and Susskind's lectures (and corresponding texts) go very quickly through classical and quantum, but skip much of the necessary examples that one requires when learning how to do physics. Just looking through these books will give you a general idea of what physics does concern itself with. If you want to skim through something more advanced (and not understand much of it) you could pick up Zee's QFT. This is also a good guide.

No. Those are actual engineering books that are on-topic with heat exchange that is done via air-cooled heat sinks and liquid cooling with radiators. My joke was aimed to a fellow engineer who would appreciate the humor.

Here, the exact two books i was referring to that I have in my own library.

www.amazon.com/Thermodynamics-Engineering-Approach-Edition-Michael/dp/B004M8EFV6

www.amazon.com/Fundamentals-Fluid-Mechanics-Edition-JustAsk/dp/0470067225

There is a boxed set of the Feynman lectures and you could all sign it

https://www.amazon.com/Feynman-Lectures-Physics-boxed-set/dp/0465023827/ref=sr_1_1?ie=UTF8&qid=1527257509&sr=8-1&keywords=feynman+lectures+on+physics&dpID=41wmHOxcldL&preST=_SX218_BO1,204,203,200_QL40_&dpSrc=srch

Not if you buy this book brand new. Ask me how I know lol.

Read the book? Seriously.

Edit: I don't mean to come off like a condescending asshole but I feel like students are haste to ask others for help when they haven't even opened the book or approached the teacher. I was a TA for a while and this was the issue 9 out of 10 times.

For reference my thermo I & II classes used this book, I'm sure there's better out there.

This should keep you busy, but I can suggest books in other areas if you want.

Math books:
Algebra: http://www.amazon.com/Algebra-I-M-Gelfand/dp/0817636773/ref=sr_1_1?ie=UTF8&s=books&qid=1251516690&sr=8
Calc: http://www.amazon.com/Calculus-4th-Michael-Spivak/dp/0914098918/ref=sr_1_1?s=books&ie=UTF8&qid=1356152827&sr=1-1&keywords=spivak+calculus
Calc: http://www.amazon.com/Linear-Algebra-Dover-Books-Mathematics/dp/048663518X
Linear algebra: http://www.amazon.com/Linear-Algebra-Modern-Introduction-CD-ROM/dp/0534998453/ref=sr_1_4?ie=UTF8&s=books&qid=1255703167&sr=8-4
Linear algebra: http://www.amazon.com/Linear-Algebra-Dover-Mathematics-ebook/dp/B00A73IXRC/ref=zg_bs_158739011_2

Beginning physics:
http://www.amazon.com/Feynman-Lectures-Physics-boxed-set/dp/0465023827

Advanced stuff, if you make it through the beginning books:
E&M: http://www.amazon.com/Introduction-Electrodynamics-Edition-David-Griffiths/dp/0321856562/ref=sr_1_1?ie=UTF8&qid=1375653392&sr=8-1&keywords=griffiths+electrodynamics
Mechanics: http://www.amazon.com/Classical-Dynamics-Particles-Systems-Thornton/dp/0534408966/ref=sr_1_1?ie=UTF8&qid=1375653415&sr=8-1&keywords=marion+thornton
Quantum: http://www.amazon.com/Principles-Quantum-Mechanics-2nd-Edition/dp/0306447908/ref=sr_1_1?ie=UTF8&qid=1375653438&sr=8-1&keywords=shankar

Cosmology -- these are both low level and low math, and you can probably handle them now:
http://www.amazon.com/Spacetime-Physics-Edwin-F-Taylor/dp/0716723271
http://www.amazon.com/The-First-Three-Minutes-Universe/dp/0465024378/ref=sr_1_1?ie=UTF8&qid=1356155850&sr=8-1&keywords=the+first+three+minutes

Have you looked into the Feynman lectures for Physics? As an EE you've probably had an intro physics sequence, so maybe you were looking for something further afield... But the Feynman lectures are a great second course on "basic" physics that's conversational, but goes into a lot of gritty details that are often glossed over. There aren't problems in the book, but there is a companion spiral bound booklet with problems designed to parallel the text; I can't speak for how useful they are. The quantum mechanics section takes a very different approach than what one usually sees.

He doesn't skimp on applications either... simple machines, lightning, crystal structure, wakes in non-ideal fluids. If the math required to analyze something is above the level of the book, he describes it accurately anyways, and explains why the problem is hard--not something you see everywhere.

Amazon; this is all three volumes in one.

It's https://www.amazon.com/Munson-Young-Okiishi%C3%82s-Fundamentals-Mechanics/dp/111884713X

The only citation in that whole paragraph is for this entry level Thermodynamics textbook:

http://www.amazon.com/Thermodynamics-Engineering-Approach-Yunus-Cengel/dp/0072383321

Hardcover boxed set of the Feynman Lectures

Hiya! I'm a recent physics/computer science graduate and although I can't think of any super cool handmade options off the top of my head, there are some physics books that I find interesting that your boyfriend may enjoy. One solid idea would be just about anything written by Richard Feynman. Reading through the Feynman Lectures is pretty standard for all physicists, though there are free versions online as well. There are a few others, such as The Pleasure of Finding things Out and Surely You're Joking Mr. Feynman. There's also a cool graphic novel that recounts the events of his life called Feynman by Ottaviani. If you're not familiar with who this guy is, he is a colorful and concise orator who won a nobel prize in physics. His biggest contributions were in nuclear physics and quantum computation, and his quirks make his explanations of these topics very interesting. The Feynman Lectures are more formal, while his personal books are a mixture of personal experience and explanation.

 
Something else that I typically gift all of my friends who are problem solvers interested in physics is the book Thinking Physics. This book is great for developing some high level intuition in every field of physics (mechanics, optics, thermodynamics, electricity and magnetism, quantum mechanics, etc.). This book is great because it's broken into small digestible sections that build your knowledge as you solve more of the questions (solutions are given).

 
Good luck!

> I was reading my Thermodynamics textbook, and the first line was "temperature is defined as that thing that is the same for two objects that have been touching for a long time" and then introduced more concepts such as relaxation time, etc.. the first chapter was 100% a layman's description of temperature.

It wouldn't happen to be Daniel V. Schroeder's An Introduction to Thermal Physics, would it? The simple definitions in the beginning and the following chapters that build upon that foundation really makes it one of the better physics textbooks. It helped me immensely to get a conceptual understanding of something that is quite complex. I can hardly imagine it being taught in another way now.

I can't say I have watched many of Khans videos. But the few I have watched, did to some extent leave some of the more rigorous 'nit-picking' for later. I see his videos as a good supplement to ones lectures and textbooks.

I know the university I'm headed to is using University Physics. I have a PDF of it, if you want it. It basically covers all the fundamental physics using calculus, so I would definitely regard it as a post-IB book.

I've heard many say that Resnick and Halliday's books are the best out there. They are perhaps a bit old, but seem to be the favorite among undergraduates.

If you want a more intuitive understanding of physics, then The Feynman Lectures are a must. He covers some material that requires knowledge of undergraduate level physics, but a lot of it I've found to still be enlightening. The intuition you'll get is invaluable.

For introductory physics, I think it's also well worth mentioning The Feynman Lectures on Physics which I think are widely regarded as great reading for any physicist, for example.

I'm a graduate student taking an undergrad Stat Mech class now (I was a biochemistry major and never took this in undergrad). We're also using Schroeder's Thermal Physics book. I also have Fermi's Thermodynamics which is a great supplement. (http://www.amazon.com/Thermodynamics-Dover-Books-Physics-Enrico/dp/048660361X)

For Stat Mech, the books I own have so far been inpenetrable to me (much more difficult than Schroeder's Thermal Physics) ... which is basically why I'm taking a Stat Thermo class. The Stat Thermo books I have Terrell Hill's Intro to Statistical Thermodynamics and Schrodinger's Statistical Thermodynamics.

So's literally anything else. Hell, I imagine wikipedia would make a better textbook than L&L Classical Field Theory. (Though I must say, I used their mechanics book for my undergrad mechanics course and really liked it. The class textbook was Marion and thornton, which I really didn't like. L&L was much clearer.)

The Feynman Lectures on Physics
Its a must read!

I think you posted something similar in the math thread right? Introductory physics is really just math and being able to plug into formulas. I'd say it'd be best to get a good math foundation before tackling physics (especially calculus). As far as book recommendations ... I Googled and found a very comprehensive list ( http://math.ucr.edu/home/baez/physics/Administrivia/booklist.html).

There should be tons of stuff on Khan Academy or on YouTube for particular subjects. Sometimes this may be even more useful than just studying a book as both math and physics books can be dense. I guess I should just list the books I have. Maybe you'll find them useful. I'll list my physics and math books separately.

In general, the Feynmann lectures are considered to be like the physics bible. You can buy a hardcover boxed set of these lectures here: http://www.amazon.com/Feynman-Lectures-Physics-boxed-set/dp/0465023827/ref=asap_B000AQ47U8_1_1?s=books&ie=UTF8&qid=1413342403&sr=1-1. Be forewarned that the lectures were intended for physics students, so it may be best to read a general physics textbook first.

Math (in no particular order):

-Advanced Engineering Mathematics by Greenberg

-Calculus: Early Transcendentals Multivariable by James and Stewart

-Thomas' Calculus Early Transcendentals (Single Variable) by Weir and Hass

-Linear Algebra and its Applications by Lay

-Differential Equations: Computing and Modeling by Edwards and Penney

-Mathematical Proofs: A Transition to Advanced Mathematics by Chartrand, Polimeni and Zhang

-A First Course in Partial Differential Equations with Complex Variables and Transform Methods by Weinberger




Physics (in no particular order):

-Intro to Quantum Mechanics by Griffiths

-University Physics by Young and Freedman (prob a good starting place)

-Spacetime Physics by Taylor and Wheeler

-Analytical Mechanics by Fowles and Cassiday

-Fundamentals of Physics by Halliday, Resnick and Walker

-Intro to Electrodynamics by Griffiths

-Heat and Thermodynamics by Zemansky and Dittman

-Statistical and Thermal Physics by Gould and Tobochnik

I hope this was helpful! If not, the physics subreddit has a dedicated thread each week to learning materials and I'm sure someone over there would be glad to help you.

Open Yale Courses Fundamental Physics I & II is a strong math-based introduction to physics https://oyc.yale.edu/NODE/206. The prof is Ramamurti Shankar whose books are available at amazon: https://www.amazon.com/Fundamentals-Physics-Mechanics-Relativity-Thermodynamics/dp/0300192207/ref=sr_1_1? , https://www.amazon.com/Fundamentals-Physics-II-Electromagnetism-Mechanics/dp/0300212364/ref=sr_1_4? including a decent book called Boot Camp for Math: https://www.amazon.com/Basic-Training-Mathematics-Fitness-Students/dp/0306450364/ref=sr_1_5? Helped me a lot.

I used this in school, still useful in the workplace...

Take Physics Thermodynamics, it'll open your eyes. We use Schroeder 20 miles north of you. I had a Nuclear Energy Conversion course that was essentially our Thermo from our department and finally had the chance to see all of the theoretical physics applied to real world (well, 1970s reactors ;D) applications.

I'm up at SPSU finishing a Physics BS and just completed our Nuclear Engineering minor. I liked the similarities in curriculum because I had seen it before, but there were some ME/EE majors that weren't too thrilled with Physics Thermodynamics showing up in a Nuclear course.

Is your advanced lab course Modern, Electronics, or Adv Measurements?

By classical physics do you mean something similar to Intermediate Mechanics?

You should be able to relate Optics to Nuclear pretty well comparing it to what you've studied with neutrons passing through matter and moderators.

Sorry about the wall of text, I don't get to talk about both subjects much in either department.

I got the new millennium edition. While I was researching which one to get , a lot of people mentioned that millenium edition was glossy and had smaller print which made it harder to read. I must say it looks fine. I don't have any problems so far. The reason i picked the latest is because it was relatively cheaper (140ish vs 300+) and had over 900 erratas fixed with respect to older editions.

Bonus: Another book I started reading in tandem is Road to Reality by Penrose which is equivalent in excitement, inspiration and quality of material and gives a nice overview of math required for physics and relation between math and physics. Highly recommend.

I can't stand Brian Greene. This is the book I got the idea from, I just added the bits about infinite and negative temperature.

http://www.amazon.com/gp/product/0201380277/

https://www.amazon.com/Munson-Okiishis-Fundamentals-Mechanics-Version/dp/1119080703/ref=cm_cr_arp_d_product_top?ie=UTF8

this is book OP mentioned in comments

syllabus

Another thread points out: the text was $960 on amazon-through-third-party, but directly from the publisher for $286

http://www.wiley.com/WileyCDA/WileyTitle/productCd-EHEP002022.html

https://www.amazon.com/Munson-Young-Okiishi%C3%82s-Fundamentals-Mechanics/dp/111884713X

Found a "loose leaf" version of this textbook for 1/5th the price, also on Amazon: here. Also, if you search for fluid mechanics - there are more than a dozen titles. Makes me wonder why did it have to be the $950 version vs all others.
What is it - more fluid? Or such mechanics? Wow

I am using Conquering the Physics GRE as an overview, but I really enjoy anything from David Morin and David J. Griffiths for the level of questions and explanations (and in-book/online solutions manuals that go a long way towards showing you how to think like a physicist). But my "library" for preparing for the physics GRE is:

CM: Morin, Problems and Solutions in Introductory Mechanics and Introduction to Classical Mechanics

Gregory, Classical Mechanics for extra explanations and problems

EM: Griffiths, Introduction to Electrodynamics 3e

QM: Griffiths, Introduction to Quantum Mechanics 3e

Thermo/Stat.Mech: Schroeder, An Introduction to Thermal Physics

Kittel and Kroemer, Thermal Physics

Waves: Morin, on his website are ten chapters to what appears to be a Waves book in the making

http://www.people.fas.harvard.edu/~djmorin/waves/

Atomic, Lab Methods: Conquering the Physics GRE and any online resources I can find.

​

If you email Case Western, they send a link to some amazing flash cards!

https://www.amazon.com/Thermodynamics-Dover-Books-Physics-Enrico/dp/048660361X/ref=sr_1_1?ie=UTF8&qid=1473018233&sr=8-1&keywords=fermi+thermodynamics

Enrico Fermi's "Thermodynamics." $7.92, written in 1956.

The Feynman Lectures

Square one...

You should have a solid base in math:

Introduction to Calculus and Analysis, Vol. 1 by Courant and John. Gotta have some basic knowledge of calculus.

Mathematical Methods in the Physical Sciences by Mary Boas. This is pretty high-level applied math, but it's the kind of stuff you deal with in serious physics/astrophysics.

You should have a solid base in physics:

They Feynman Lectures on Physics. Might be worth checking out. I think they're available free online.

You should have a solid base in astronomy/astrophysics:

The Physical Universe: An Introduction to Astronomy by Frank Shu. A bit outdated but a good textbook.

An Introduction to Modern Astrophysics by Carroll and Ostlie.

Astrophysics: A Very Short Introduction by James Binney. I haven't read this and there are no reviews, I think it was very recently published, but it looks promising.

It also might be worth checking out something like Coursera. They have free classes on math, physics, astrophysics, etc.

Thorton and Marion was the textbook when I took it and I would be surprised if it wasn't still. It's a solid undergraduate textbook. When I took it my professor more or less taught straight from it, but Makins will probably deviate a bit more (in a good way)

> I often see people say that the beauty of maths is that there are very rigid, well-defined rules, and when you know the rules, it's easy to use them to 'play the game'.

Bad advice, IMO. In math, as in life, you follow the rules because you understand why we have those rules and you come to agree with them. A teacher should aim to make you believe in the motivations for the rules, not just follow them. And sometimes we change the rules, when we can justify doing so.

Anyway, my advice is to pick up a different textbook, read through it and work the exercises. I was about where you are now and I picked up Apostol's Calculus (vol I) and I got a lot out of it. Spivak's Calculus is another popular recommendation. You might not be able to solve all of the problems, but that's OK: you're not pushing your limits if you never attempt something that you fail at.

Another thing you could try if you're not seeing how to apply calculus is to take some physics. You might try this course:

http://oyc.yale.edu/physics/phys-200

Shankar also wrote this book, which is supposed to be similar to the above-linked course:

https://www.amazon.com/dp/0300192207

Of course, I'm sure your university also teaches physics perfectly well if you want to enroll in a real course.

"lol, it knows how to read comment histories, but it doesn't understand the very field of its phd." Referring to me as an "it" in an endeavor to dehumanize me and neglect my sound contentions further expounds your fallacious, extemporaneous, mendacious, unsagacious, perfidious, nascent dissidence and dearth of intellect. Like I said, if I "[don't] understand the very field of [my] phd" I implore you to mathematically prove my original contention erroneous (newsflash: you will have to fabricate new mathematical principles to achieve this insurmountable feat).

"So what was your dissertation on?" If I tell you my award winning dissertation you will find out my real name then subsequently gather your minute group of pathetic, no-life friends (in a futile attempt) to besmirch my lionized reputation. I'd rather not give low IQ children any reason to fabricate hate towards my exalted moniker.

"What texts would you suggest I uses to brush up on my fluid dynamics?" Assuming that you already have read (a colossal suspension of disbelief) a few introduction to physics textbooks, this would be a good start: http://www.amazon.com/Fundamentals-Fluid-Mechanics-Bruce-Munson/dp/1118116135/ref=sr_1_1?ie=UTF8&qid=1404497955&sr=8-1&keywords=fluid+dynamics.

"What are the exact pressure and temperature conditions in that fictional fire anyway?" What a risible and ludicrous inquiry. If you knew anything about engineering problems you would understand I would have to assume excessive amounts of information that you would overtly, fallaciously disavow.

"(ps I don't normally feed the trolls, but I'm taking a little study break and you and your thesaurus are pretty entertaining)" Do you label everyone that triumphs over you in intellectual bouts as "trolls"? Go back to neurotically studying for a test that I could perfunctorily terminate in a quarter of the time with an eighth of the time spent studying.

For anyone interested in finding about more about this type of stuff, I am reminded me of these super old videos of fluid motion, and I can't recommend the entire series highly enough.

There are also the books An album of fluid motion and A gallery of fluid motion which have a ton of cool pictures.

I found this a very useful introduction; http://www.amazon.co.uk/Laws-Thermodynamics-Short-Introduction-Introductions/dp/0199572194

That whole series of books is quite useful if you're trying to get a taste of a particular topic before studying it in more detail.

Sure no problem. These are the texts I used as an undergrad:

Classical Mechanics: Classical Dynamics of Particles and Systems, Thornton and Marion

Electrodynamics: Introduction to Electrodynamics, Griffiths

Statistical Mechanics: An Introduction to Thermal Physics, Schroeder

Quantum Mechanics: Introduction to Quantum Mechanics, Griffiths

For special relativity I never used a book strictly devoted to the subject. Thornton and Marion will cover it at the end, and so will Griffiths E&M. However my favorite source on special relativity is Landau's Classical Theory of Fields, the first few chapters.

I want to say it was from an undergraduate thermodynamics problem asking the question, "What is the likelihood of all the air molecules in a room occupying 99% of the space leaving a 1% vacuum?"

I probably just want to invoke Avogadro's constant, though. (You know, after you see a number a certain number of times, you like seeing it again.)

Here's a little book by a pretty famous guy that was recommended back when I first learned it. I remember it was enjoyable to read and helpful, but I haven't looked at it in a really long time so I don't remember specially what it addresses.

https://smile.amazon.com/Thermodynamics-Dover-Books-Physics-Enrico-ebook/dp/B008TVLP6K

I have a book that I got as a gift that most aero folks should love (I'm an aero guy too). It's called "An album of fluid motion" by Van Dyke. Amason has a paperback version. http://www.amazon.com/Album-Fluid-Motion-Milton-Dyke/dp/0915760029

For math you're going to need to know calculus, differential equations (partial and ordinary), and linear algebra.

For calculus, you're going to start with learning about differentiating and limits and whatnot. Then you're going to learn about integrating and series. Series is going to seem a little useless at first, but make sure you don't just skim it, because it becomes very important for physics. Once you learn integration, and integration techniques, you're going to want to go learn multi-variable calculus and vector calculus. Personally, this was the hardest thing for me to learn and I still have problems with it.

While you're learning calculus you can do some lower level physics. I personally liked Halliday, Resnik, and Walker, but I've also heard Giancoli is good. These will give you the basic, idealized world physics understandings, and not too much calculus is involved. You will go through mechanics, electromagnetism, thermodynamics, and "modern physics". You're going to go through these subjects again, but don't skip this part of the process, as you will need the grounding for later.

So, now you have the first two years of a physics degree done, it's time for the big boy stuff (that is the thing that separates the physicists from the engineers). You could get a differential equations and linear algebra books, and I highly suggest you do, but you could skip that and learn it from a physics reference book. Boaz will teach you the linear and the diffe q's you will need to know, along with almost every other post-calculus class math concept you will need for physics. I've also heard that Arfken, Weber, and Harris is a good reference book, but I have personally never used it, and I dont' know if it teaches linear and diffe q's. These are pretty much must-haves though, as they go through things like fourier series and calculus of variations (and a lot of other techniques), which are extremely important to know for what is about to come to you in the next paragraph.

Now that you have a solid mathematical basis, you can get deeper into what you learned in Halliday, Resnik, and Walker, or Giancoli, or whatever you used to get you basis down. You're going to do mechanics, E&M, Thermodynamis/Statistical Analysis, and quantum mechanics again! (yippee). These books will go way deeper into theses subjects, and need a lot more rigorous math. They take that you already know the lower-division stuff for granted, so they don't really teach those all that much. They're tough, very tough. Obvioulsy there are other texts you can go to, but these are the one I am most familiar with.

A few notes. These are just the core classes, anybody going through a physics program will also do labs, research, programming, astro, chemistry, biology, engineering, advanced math, and/or a variety of different things to supplement their degree. There a very few physicists that I know who took the exact same route/class.

These books all have practice problems. Do them. You don't learn physics by reading, you learn by doing. You don't have to do every problem, but you should do a fair amount. This means the theory questions and the math heavy questions. Your theory means nothing without the math to back it up.

Lastly, physics is very demanding. In my experience, most physics students have to pretty much dedicate almost all their time to the craft. This is with instructors, ta's, and tutors helping us along the way. When I say all their time, I mean up until at least midnight (often later) studying/doing work. I commend you on wanting to self-teach yourself, but if you want to learn physics, get into a classroom at your local junior college and start there (I think you'll need a half year of calculus though before you can start doing physics). Some of the concepts are hard (very hard) to understand properly, and the internet stops being very useful very quickly. Having an expert to guide you helps a lot.

Good luck on your journey!

Have a read of these. Fantastic set of lectures. http://www.amazon.com/Feynman-Lectures-Physics-boxed-set/dp/0465023827

You could always try a physics book on the subject. One of the common books used in introductory thermodynamics courses for physics majors is Thermal Physics by Schroeder. https://www.amazon.com/Introduction-Thermal-Physics-Daniel-Schroeder/dp/0201380277

It does a decent job at covering the physics behind thermodynamics and a good intro to statistical mechanics.

I am not sure if it meets your criteria of 'interesting' since it is geared at being a college textbook and reading it for leisure may be a bit tedious.

Read this book.
http://www.amazon.com/Thermodynamics-Enrico-Fermi/dp/1607962381

It's very short and introduces all the fundamental principles of thermodynamics.

The first two laws:
dU = dQ - dW. The change in energy of a system is equal to the amount of heat you put in (dQ) minus the amount of work the system does on its environment (dW).

Clausius statement for the second law:
"Heat can never pass from a colder to a warmer body without some other change, connected therewith, occurring at the same time." Basically a cooler object cannot spontaneously warm a hotter object (cooler and hotter described by something called temperature).

Then you have PV = nRT for an ideal gas, and W = integral P * dV.
S = entropy = integral dQ/T, and you can prove that entropy is a description of the state of a system using basic properties of differential equations (basically, if you take a closed integral of dQ/T, you'll get 0).

Also if you had a physics test coming up, wouldn't your physics classes have taught it? Or are you talking about some sort of standardized test? If it's the latter, you're better off getting a practice book and chugging away. I know at least for the physics SAT subject tests, the thermodynamics you need is not thermodynamics in the classical sense, but more about heat transfer and the like.

There's a reason whole semesters are devoted to thermodynamics and kinetic theory; it's a very broad topic.

Like I already explained, the strong and weak force also play key roles. The strong force keeps the quarks bound together in nucleons, and keeps the nucleus bound together. The weak force is involved in radioactive decay, which occurs inside your body as well.

If you want to actually learn about physics, start here.

Sorry that other people are being harsh critics, but yeah man. Respectfully, a couple of these are pretty overpriced.

Thing is, most people would rather buy a new book from the store than buy a used book for barely less than retail. I suggest you lower the prices, especially keeping this in mind:

Astrodynamics sells new for $17: https://www.amazon.com/Fundamentals-Astrodynamics-Dover-Aeronautical-Engineering/dp/0486600610

Propulsion sells new for $25: https://www.amazon.com/Mechanics-Thermodynamics-Propulsion-Philip-Peterson/dp/8131729516/ref=sr_1_2?s=books&ie=UTF8&qid=1526807320&sr=1-2&keywords=mechanics+and+thermodynamics+of+propulsion+2nd+edition

Your edition of COE 3001 sells new for $113: https://www.amazon.com/Mechanics-Materials-James-M-Gere/dp/1111577730/ref=sr_1_2?s=books&ie=UTF8&qid=1526807508&sr=1-2&keywords=mechanics+of+materials+goodno and it's also not the current edition

Best of luck. And if you find someone looking specifically for the current edition of the Mechanics of Materials book, please send them my way!

a. Stanford. But a lot of people who work with me did not go to big-name schools. UC Irvine, Iowa State, Oregon state, etc. Where I work, there's lots of UW. Where I used to work before that; lots of RPI and USC.

b. I got great grades in high school, but slipped a little bit in college. (This made my life difficult later. A good GPA makes it easier to be hired, and is practically necessary if you want a Masters, something that many many many engineers have today). Classes: I'm sure I'm not the first one to tell you this, but take all the math and physics you can. And try to learn some of this stuff outside of school (it can be more fun that way), pick up some books, try to get through the Feynman Lectures on Physics (or just Six Easy Pieces and QED to start off), some Martin Gardner, books like Euler's Gem, learn HTML, try your hand at programming, build LEGO robots... all that kind of stuff will make it easier to learn the stuff you need to learn to become an engineer.

What's the Author / Title / Edition / ISBN?

Edit: Thanks OP

He posted it lower down. It's an engineering textbook.

Also I've paid 800 for a textbook 5 years ago. Law classes suck.

That said he can buy the binder ready for 170.

Ummm. It's on amazon for 121 Cad or 50 for the kindle edition. canadian...https://www.amazon.ca/Munson-Okiishis-Fundamentals-Mechanics-Version/dp/1119080703/ref=pd_cp_14_1?_encoding=UTF8&psc=1&refRID=WY131QS949P6ZP6C3VZ8

There is a newer edition for $170 it looks like. And it have eBook rental which is cheaper.

What level are you? If you're physics degree level then I'd suggest Feynman's Lectures on Physics as an excellent introduction. http://www.amazon.co.uk/Feynman-Lectures-Physics-boxed-set/dp/0465023827/ref=sr_1_5?ie=UTF8&qid=1408125805&sr=8-5&keywords=lectures+feynman

What you're looking for is The Richard Feynman Lectures on Physics.

EDIT: Just realized these might actually be heavier than you're looking for, but I think there's no better introdcution to the world of Physics than through Feynman.

It's great that you want to study particle physics and String Theory! It's a really interesting subject. Getting a degree in physics can often make you a useful person so long as you make sure you get some transferable skills (like programming and whatnot). I'll reiterate the standard advice for going further in physics, and in particular in theoretical physics, in the hope that you will take it to heart. Only go into theoretical physics if you really enjoy it. Do it for no other reason. If you want to become a professor, there are other areas of physics which are far easier to accomplish that in. If you want to be famous, become an actor or a writer or go into science communication and become the new Bill Nye. I'm not saying the only reason to do it is if you're obsessed with it, but you've got to really enjoy it and find it fulfilling for it's own sake as the likelihood of becoming a professor in it is so slim. Then, if your academic dreams don't work out, you won't regret the time you spent, and you'll always have the drive to keep learning and doing more, whatever happens to you academically.

With that out of the way, the biggest chunk of learning you'll do as a theorist is math. A decent book (which I used in my undergraduate degree) which covers the majority of the math you need to understand basic physics, e.g. Classical Mechanics, Quantum Mechanics, Special Relativity, Thermodynamics, Statistical Mechanics and Electromagnetism. Is this guy: Maths It's not a textbook you can read cover to cover, but it's a really good reference, and undoubtably, should you go and do a physics degree, you'll end up owning something like it. If you like maths now and want to learn more of it, then it's a good book to do it with.

The rest of the books I'll recommend to you have a minimal number of equations, but explain a lot of concepts and other interesting goodies. To really understand the subjects you need textbooks, but you need the math to understand them first and it's unlikely you're there yet. If you want textbook suggestions let me know, but if you haven't read the books below they're good anyway.

First, particle physics. This book Deep Down Things is a really great book about the history and ideas behind modern particles physics and the standard model. I can't recommend it enough.

Next, General Relativity. If you're interested in String Theory you're going to need to become an expert in General Relativity. This book: General Relativity from A to B explains the ideas behind GR without a lot of math, but it does so in a precise way. It's a really good book.

Next, Quantum Mechanics. This book: In Search of Schrodinger's Cat is a great introduction to the people and ideas of Quantum Mechanics. I like it a lot.

For general physics knowledge. Lots of people really like the
Feynman Lectures They cover everything and so have quite a bit of math in them. As a taster you can get a couple of books: Six Easy Pieces and Six Not So Easy Pieces, though the not so easy pieces are a bit more mathematically minded.

Now I'll take the opportunity to recommend my own pet favourite book. The Road to Reality. Roger Penrose wrote this to prove that anyone could understand all of theoretical physics, as such it's one of the hardest books you can read, but it is fascinating and tells you about concepts all the way up to String Theory. If you've got time to think and work on the exercises I found it well worth the time. All the math that's needed is explained in the book, which is good, but it's certainly not easy!

Lastly, for understanding more of the ideas which underlie theoretical physics, this is a good book: Philsophy of Physics: Space and Time It's not the best, but the ideas behind theoretical physics thought are important and this is an interesting and subtle book. I'd put it last on the reading list though.

Anyway, I hope that helps, keep learning about physics and asking questions! If there's anything else you want to know, feel free to ask.

The subreddits about the individual fields of science have usually a lot of helpful links in the sidebar.

Best and most universal example is /r/math

I bought myself the Feynman Lectures off Amazon. It touches almost all the fields of science and is famous for being an "easy" read.

this edition is huge in size, is relatively cheap if you consider the size and leaves room for your own notes at the outside border (can also be seen as a negative, but well). Or just read them online for free in HTML

If you'd like a book with plenty of pictures The Magic of Reality could be a good start, and if you'd really committed to learning more about science, The Feynman Lectures on Physics would be an excellent choice as well. There are a couple of simplified versions you can find here and here.

For thermo/stat mech, the standard undergraduate texts are Schroeder (http://www.amazon.com/Introduction-Thermal-Physics-Daniel-Schroeder/dp/0201380277), and I guess Blundell & Blundell (http://www.amazon.com/Concepts-Thermal-Physics-Stephen-Blundell/dp/0199562105).

For Quantum Physics the standard undergradate books are the quantum mechanics books by Shankar, Griffiths, and sometimes Messiah. I personally didn't like any of them, I learned from Cohen-Tannoudji but it is more difficult mathematically. For more advanced books you can look at Sakurai or Landau's book.

There is no real standard book that I'm aware of for Nuclear/subnuclear physics for undergrads (because it is really a graduate level book). But I think Griffiths has a book on particle physics if you like his quantum mechanics book. He does like to talk alot though just so you know.

Mein armes Hirn, soviel Marketing, Namedroppingscheisse in einem Artikel, und das war nur der Bericht dazu?

Boah, erstmal Frühstück, Hauptgang und Dessert
und den Dorn Bader als Snack.

If you have the cash to blow, the Feynman Lectures on Physics are a great resource, not just with EM, but everything you learn in undergrad courses.

Check out this text book:

http://www.amazon.com/Introduction-Thermal-Physics-Daniel-Schroeder/dp/0201380277/ref=sr_1_1?ie=UTF8&s=books&qid=1265305881&sr=1-1

It goes from simple understanding to the statistical mechanics of what's going on.

Steer clear of engineering books if you want a good understanding as they often cut corners(because alot of stuff that is deeper doesn't apply to them) to make it more applicable to their design work.

this is my favorite... https://www.amazon.com/Applied-Fluid-Mechanics-Robert-Hardcover/dp/B008AUFC4Q

Link for the lazy

i don't know what your background is, but fundamentals of physics by shankar might be a good place to start. it's backed by a course in the open yale course series.

If you're serious, start here for understanding Energy. Then something much more light weight about Oil

Then you can read light edutainment like The Prize with more gain.

Are you talking about the green book?

You're not clear about what you want to learn in chemistry -- do you want to do more practical stuff (organic synthesis / physical chemistry) or do you just want to know how molecules/atoms behave (organic chemistry ,biochemistry, physical chemistry , quantummechanics?

Wrt to doing synthesis 'on your own': these days, doing chemistry outside a lab is seen as something 'very dangerous', because only trrrrists and clandestine drug-making chemists are interested in chemistry.

Not exactly PDE focued, but I have this as a coffee table book:
An Album of Fluid Flow

Less math and more pictures of fluid flow demonstrations. Still pretty though.

Alternative to Schroeder "An Introduction to Thermal Physics" for self-study?

http://www.amazon.com/Introduction-Thermal-Physics-Daniel-Schroeder/dp/0201380277

Overall this is quite a good book but I am trying to use it for self-study and the author refuses to release any answers to the problems. His explanation was that if he releases any answers he cannot later un-release them.

Compounding this, his problems are often multi-stage problems where parts of a problem depend on earlier parts and one problem depends on the result of previous problems. In some cases you have 3 multi-stage problems building upon one another. At some point you realize something went wrong but you have no clue where...

OK lesson learned: For self study you need answers so you can check your understanding. This is just basic learning theory - you need feedback.

I have looked at a few TP books but none have answers for checking eg Kittel Thermal Physics, Blundell "Concepts in Thermal Physics".

He does have an answer book for instructors only.

For an undergraduate approach I recommend Schroeder. However, this book starts with thermal physics which is, well, a bit boring ;). The math is not hard, but developing that 'physics instinct' can sometimes be challenging.

For a more advanced, but very nice and systematic text, I recommend Toda, Kubo, et al.. Another graduate text is Huang.

There are also the books by Feynman and Landau and Lifshitz Pt. 1 (Pt. 2 is quantum field theory, which at this stage you probably will want to avoid).

No problem. As for the Boltzmann distribution, it has to do with thermodynamics. Here's the Wikipedia article for it: http://en.wikipedia.org/wiki/Boltzmann_distribution#Derivation

This article does a decent job of explaining what it is. The derivation that it links to, however, seems to be a little lacking (I only skimmed through it).

Just in case you want to learn more about thermodynamics, you could try this textbook: http://www.amazon.com/Introduction-Thermal-Physics-Daniel-Schroeder/dp/0201380277/ref=sr_1_1?ie=UTF8&qid=1369548035&sr=8-1&keywords=schroeder+thermodynamics

That's the textbook my school used, and it's actually one of the best textbooks I've used in physics or mathematics. It's also relatively cheap for a textbook.

Skim over the Feynman Lectures on Phyisics. The first volume has is mostly relevant to what you are doing.

LOL someone is selling this book for 10 Grand

What the Fuck

previous edition, but might work:
https://www.amazon.com/gp/offer-listing/1118116135/ref=sr_1_1_olp?s=books&ie=UTF8&qid=1484869527&sr=1-1&keywords=Fundamentals+of+Fluid+Mechanics+Munson

Here are some cool videos for you(not really informative about the makeup of cells but nonetheless might interest you enough to read the amazing books that I've listed below! The microcosmos really is a whole 'nother world!):

Kinesin Walking Narrated Version:

http://youtu.be/YAva4g3Pk6k


This is a better model. Notice how the 'legs' shake around violently until it snaps into place. Sometimes the random motion of the jiggling atoms(these aren't shown. Imagine the Kinesin molecules shown in a sea of water molecules, all jiggling about ferociously. The 'invisible' water molecules are bumping up against the Kinesin, and it's evolved to work with the random motions) makes it step backwards! But the ATP/ADP process makes it more likely to step forward than backwards(an evolved process). This is explained well in the book Life's Ratchet below.

Molecular Motor Kinesin Walks Like a Drunk Man:

http://youtu.be/JckOUrl3aes

Here are some amazing book to read. Seriously read all of these, preferably in the order listed to get the best understanding. They will blow your mind many times over. Many, if not all, may be at your local library.


QED: The Strange Theory of Light and Matter:

http://www.amazon.com/gp/aw/d/0691125759


Quarks: The Stuff of Matter

http://www.amazon.com/gp/aw/d/0465067816


Thermodynamics:A Very Short Introduction

http://www.amazon.com/gp/aw/d/0199572194


Life's Ratchet:

http://www.amazon.com/gp/aw/d/0465022537/


The Greatest Show on Earth: The Evidence for Evolution

http://www.amazon.com/gp/aw/d/1416594795


The Drunkard's Walk: How Randomness Rules Our Lives

http://www.amazon.com/gp/aw/d/0307275175p

I would also recommend taking a biology and maybe a chemistry class at your local community college, if possible. My biology class started with the smallest stuff, atoms(technically not the smallest, but whatever), and worked its way up through the chain of sizes up to the biosphere. It was very informative and there were a few people in their 40s(a guess) that really enjoyed the class. So you can do it, too!

odd enough, just thought it would be those http://www.amazon.com/gp/product/images/0465023827/ref=dp_otherviews_1?ie=UTF8&s=books&img=1

The Feynman Lectures are a perfect introduction to physics from high school level all the way up to degree level.

A good understanding of maths is essential to more advanced physics and there is an excellent textbook written by two extremely qualified headmaster's called The Language Of Physics: A Foundation for University Study which is what's recommended to first year University students and poses questions at the end of each chapter.

If you're looking for something a little less intimidating, then the A Very Short Introduction series have a perfect range of short (and cheap!) books on Physics: [Quantum Theory]
(https://www.amazon.co.uk/gp/product/0192802526/ref=pd_sim_14_4?ie=UTF8&psc=1&refRID=9A3MSV2XSQRYF880MYP6), Relativity, Particle Physics, Cosmology, Nuclear Physics, Black Holes, Thermodynamics, Astrophysics, Light and Magnetism. These are great little books that don't blow your head off!

Physics is an extremely interesting subject to read around and I wish you the best with it :)

The quality and size of the mirror will only start to matter when you're doing real research. For example, what I'm doing requires me to resolve much smaller fluctuation in index of refraction than what you would get from "standard" optical equipment. This does not, by any means, mean that you can't observe Schlieren effects with cheaper mirrors and lenses. For simple demonstration/proof of concept purposes, you can get away with almost any optical grade.

For example, this is an image of shock diamonds formed outside of a compressible jet that I did as a demonstration for my lab:

http://i.imgur.com/yfWByA0.jpg

This was done with two very cheap 2" plano-convex lenses purchased from Thorlabs (http://thorlabs.us/) and 1 very cheap 55 mm lens attached to a very cheap $300 camera. As you can see, the physical phenomenon is easily observed using rather low grade equipment.

I would highly recommend that anyone who is interested in Schlieren photography to go out and experiment with it. It is a lot of fun. You can observe some very cool physics with just a couple of hundred bucks for the setup. One other thing to keep in mind is that you can do Schlieren with off-axis parabolic mirrors OR lenses. I HIGHLY recommend that you start with lenses before moving to mirrors. They are significantly easier to align and setup than your typical "z-type" Schlieren mirror systems. Purchase yourself 2 lenses and an optical rail (you can find all of it on Thorlabs), and you will be able to setup your system quite easily. I don't have time to go through all the technical details, but you should read about different Schlieren methods online and learn how they work.

If you would like to see some amazing examples of Schlieren and Shadowgraph images, I HIGHLY recommend Van Dyke's book on Album of Fluid Motion (http://amzn.com/0915760029).

If you check one of my links, you'll see hard covers are available.

There's even people listing the book on Amazon for $2000, $4,375, and $10,000.

https://www.amazon.com/gp/offer-listing/111884713X/ref=sr_1_3_olp?s=books&ie=UTF8&qid=1484839853&sr=1-3&keywords=fundamental+fluid+mechanics+8th

Don't wait until last minute, and the bindered or binder ready pages should be exact copies of the hardcover.

>if you check the reviews you'll see that it's been printed with no diagrams, making it almost useless

No, that's not what bindered copies means. They're gonna be page for page copies of the textbook. In any case, if you shop early, the hardcover can be had for less than what you just imaged.