Best gun cleaning kits according to redditors

We found 207 Reddit comments discussing the best gun cleaning kits. We ranked the 118 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Gun Cleaning Kits:

u/JihadTape · 25 pointsr/guns

So this is a Smith and Wesson Model 27, made in 1960 (per the serial number), .357 Magnum (also .38 special). I received it as a gift and it is my first gun ever! Super stoked to own it now, and I'll probably join the prolonged slide of gun ownership that I see in this sub time to time. My next purchase is likely a smaller concealed carry weapon.

The giant ammo tin is vintage, I'm guessing vietnam era, but no idea, I could be full of shit. It's stacked with hundreds of .357 FMJs. 1 box of .357 hollow points, and 2 boxes of Shotshell snake charmers.

I'm pleased as punch with this gun. I've just purchased a bunch of accessories on amazon, I'll post them below, maybe you can tell me if these are good products or not for range shooting. (No referral links or any of that bs)

Plano Protector 4 pistol case

MTM 38/357 Cal 100 Round Flip-Top Ammo Box

Remington T-72 Shooting Glasses

3M Peltor Combat Arms Earplugs

Hoppe's Universal Gun Cleaning Accessory Kit



u/hulkzillaman · 22 pointsr/guns

First off familiarize yourself with the four rules of firearm safety

>Treat all guns as if they are loaded.

>Never let the muzzle cover anything you are not willing to destroy.

>Keep your finger off the trigger until your sights are on the target.

>Be sure of your target and what is beyond it.

sounds like a safe is out of the question, if so you can pick these up a couple of gunvault breech lock kits or these.

second you can pick up a universal gun cleaning kit, hoppes no. 9 cleaning solvent, and cleaning patches online or at your local Walmart.

u/TherianUlf · 20 pointsr/ar15

don't be a dick hammer and put all sort of mall ninja shit on it right away. spend all your money on ammo and quality cleaning equipment.



Cheap decent quality ammo



if you're new and you just want an easy cleaning kit:



field manual with pictures if you're really new to AR's something like this is super valuable to have.




Otis Cleaning Kit includes everything you need to clean it.



Lube Everyone has their favorite Lube, mine was ballistol, you can dump it on pretty much everything, and it makes it work together smoothly.



But now I prefer to use Seal 1 CLP this shit is great.




scrapper for when your bolt carrier group gets all fuckered.




you're def going to want one of these puppies too, a chamber brush

u/Citi19 · 12 pointsr/guns

I'm only speaking from a few months experience so I'm sure someone can give you a more complete answer, but I have used This Otis kit and it works fine for cleaning my handguns and my .22 rifle. This video shows you how to use it on a bolt action.

I'm mostly just commenting to tell you that you picked a really nice first rifle.

u/mesorouth · 12 pointsr/gundeals

FYI, if you're not a fan of the pink, the normal tactical cleaning kit is $35 shipped on amazon: https://www.amazon.com/Otis-Tactical-Cleaning-System-Shotgun/dp/B0000C52A5

u/newyearyay · 8 pointsr/gundeals

One thing I would add - scew apart/together cleaning rods will eventually have their threads buggered up, there are steel versions of kits like this out there which can damage rifling if mesed up enough (the brass more than likely wont but can be a pain screwing them together if you cross thread it once). An 'easy' upgrade off the bat would be a one piece cleaning rod (there are cheaper options out there but these rods are great) just something someone might want to consider adding to the list.

If you have money burning a hole in your pocket, the Otis Elite is excellent. But pricey (doesnt have a one piece rod, but pull throughs have their own advantage) they also make a compact version this version is included in the 'elite' - which just has extra pull throughs and more caliber brushes as well as some extra odds and ends.

u/danger_one · 6 pointsr/guns

Don't listen to the people saying that it is a waste of money. It doesn't matter what the rifle is worth if it's valuable to you. I did something very similar to a Stevens model 86 that belonged to an uncle that I'm named after. I found parts for it from Numrich and used this and this, although there might be better options now. Enjoy the project.

u/mystermag · 5 pointsr/guns

Those a great guns.

There’s a ton of information on cleaning rifles and pistols online. I suggest getting an OTIS cleaning kit, and going from there.

Here’s a decent start

It’s going to give you the bare essentials for cleaning multiple calibers.


Here is a link to the River Mini14 cleaning

Here is a video on how to clean the Tokarev.

Enjoy!

u/666fixed · 5 pointsr/Glocks

They sell them on Amazon.

u/Chakkamofo · 4 pointsr/guns

I was recently given this as a gift and really like it: http://www.amazon.com/Otis-Tactical-Cleaning-System-Brushes/dp/B0000C52A5

u/prey1337 · 4 pointsr/guns

I looked into this for my nickel plated CZ.

Was referred to this stuff(M-Pro 7), and have been using it ever since. Should be at your local outdoor sports store.

u/z4ckm0rris · 3 pointsr/Glocks

I just did this the other day after watching the hickok45 video. Here's what I bought:

Ballistol Multi-Purpose Oil, Aerosol spray, 6 oz - $8.99 (http://www.amazon.com/Ballistol-Multi-Purpose-Oil-Aerosol-spray/dp/B004ERKCIA?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00)

UTG 9MM Pistol Cleaning Kit - $9.80 (http://www.amazon.com/UTG-9MM-Pistol-Cleaning-Kit/dp/B002ZJ1364?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s02)

The Professional's Choice Pistol/Rifle Cotton Flannel 2 3/4-Inch Round Gun Cleaning Patches (120-Pack), .38/.357-Calibre/9mm/10mm - $4.49 (http://www.amazon.com/Professionals-Choice-Cleaning-120-Pack-357-Calibre/dp/B005TJWQ4A?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s02)

The Patches and actual cleaning kit showed up today. Kit seems to be decent for what it costs. Ballistol will be here on Wednesday. I think the Patches require that you spend $25 (add-on item) so you may have to add something else to get up to the price to get them. Or you can just get a bigger package of them.



u/NorincoPlinko · 3 pointsr/canadaguns

Hoppe's synthetic blend, the smell is almost non existent and it is non-toxic.

bronze 30 cal brush

Use a wire instead of a rod...., or a boresnake.

the bolt... read your manual, generally very very light oiling, like one drop goes a long way.

Edit - derps.

u/zornathan · 3 pointsr/BuyItForLife

I've been fond of Otis cleaning kits. It's a compact snake, brush and patch kit. They sell it in different configurations, but they have a few universal ones with a mixture of everything.

u/trevorpinzon · 3 pointsr/pcgaming
u/gsg9dotca · 3 pointsr/canadaguns

You're best bet for a cleaning kit is to get one of the deluxe versions. They only cost ten bucks more but you're good for this and future purchases.

http://www.cabelas.ca/product/91581/winchester-42-piece-deluxe-universal-gun-cleaning-kit

https://www.amazon.ca/Hoppes-No-Universal-Cleaning-Accessory/dp/B001HBHNM4/ref=sr_1_3?ie=UTF8&qid=1502372710&sr=8-3&keywords=deluxe+rifle+cleaning+kit

Hard case protects a bit better but soft is fine to.

Patches come with the kit. Unless you're using Otis or some other brand that requires special patches get what ever is one sale. They're all the same.

You'll usually get a small bottle of oil with the kit. 3in1, Hoppe's, or Remington are all fine. The expensive stuff doesn't really do much other than waste your money.

Slings are for carrying your gun in the bush. At the range they generally want you to move you gun while cased. Get a piece of string and test what looks/feels right. Most slings will come with 6" of adjustment. You don't want it to be overly long that the excess flops about but to short isn't handy either. Measure the interior dimension of your sling swivels so you get the right width. A cheap nylon one will work the same as a hand tooled leather one but leave you more money for ammo.

Get a silicone gun & reel cloth for wiping your gun down before you put it in the safe.

that should be about it to get you started. have fun

u/Ghett0blasterX · 2 pointsr/guns

A rifle rest. Trying to prop my rifle up on my bag and sandbags was a nightmare, taking an otherwise unused bipod (and the accompanying rail section) on and off my handguards was a pain in the ass, I finally bought one of these and have since zeroed all of my rifles effortlessly.

A two-wheeler / hand truck. The worst part of every range trip is carrying shit to and from the car from the last spot in the parking lot. My ammo can, rifle bag, and spotting scope all fit on this hand truck with a couple of bungee cords and just leave my target stand to haul out manually.

A quality target stand. My range sells cardboard A-frame target stands that blow over in a light breeze, sag when they get wet, and are too short to shoot at less than 25 yards or so, which was certainly too far for me to make any use of with a handgun. I built a square-framed two-legged target stand out of 2x2s and PVC pipe to remedy the situation, but it's a heavy bastard made of smooth, droppable surfaces and 6-foot lengths of ungainliness. I picked up the Range-Pro and now all I have to do is stick a pair of 2x1s in and staple away. I'd also say the Juggernaut is probably worth the extra dosh, the Range-Pro is a little unstable on the front-to-back axis if you're on uneven ground in the wind.

Sight Adjustment Tools (AK / AR). Quit dicking around with that cartridge (or in the case of the AK, that flint and piece of whale bone) and get the tool. The AR tool is also good for Tech Sights.

A one-piece rifle-length cleaning rod. I actually picked mine up (mine was a nylon number, not the model linked) from Wal-Mart for about $7, and it's a huge improvement over the 3-4 piece brass rod you get with every cleaning kit. No dicking around with thread adapters or having the rod too inflexible to get down an AK barrel from the breach, you just stick your brush / jag on the end and go, and it's maybe a third of the weight. Side note: Wal-Mart sells AK cleaning rods by the 10-pack, just in case you're a fucking lunatic.

u/rimfired · 2 pointsr/Beretta

I'm not sure about kits, I used a sight paint like this but red: https://www.amazon.com/Gun-sight-paint-brightest-phosphorescent/dp/B071NQNZ13

I would assume unless these kits involve gunsmithing, they're probably just paint as well. The red definitely helps the front sight stand out against dark targets, and I'm sure the glowing ones would too.

u/vvelox · 2 pointsr/chicago

An alternative to a bipod is a good sling. Properly adjusted it should it nicely over your shoulder when swung around it should up tightly in against your other elbow when you press your elbow down into your chest as you hold the rifle. This should pull the sling taught and provide you with a nice shooting platform. For me I tend to find it is a toss up between a 1907 or a generic cloth/leather one used on like the SKS or FR8.

In regards to cleaning, as SikhAndDestroy, a good bore snake comes in handy. I am fond of the one made by Otis with Hoppes solvent and oil. A nice set brushes can be handy. I suggest getting one in both nylon and brass.

As far as cleaning goes, as long as you are not shooting corrosive ammo, this in general is something that can wait every 500 to 1000 rounds easily for most firearms as long as you are not shooting something with terrible tolerances, such as some of the more expensive 1911. As far as AR goes, as long as they stay nicely lubed, cleaning can wait for them as well as reliability with them is a factor of being nicely oiled.

In regards to pick yourself up a got bit set such as this one. The big thing about choosing a bit set is not to get one that just generic angled flat heads. You need one that curve in your you will easily strip and slot screws.

Also wash your hands well post shooting.

u/netchemica · 2 pointsr/ar15

You'll need to take the handguard off and a punch to take the gas tube out. Dremel it down to where you think you need it, paint it with a dry erase marker, and install your handguard. If it makes contact, the dry erase marker will be removed in that area and you'll have an easier time finding out how much more you have to take down.

If it doesn't make contact, clean the gas block off and use either high-temp paint, or use a blueing kit.

u/sheepsix · 2 pointsr/canadaguns
u/MisterNoisy · 2 pointsr/gundeals

I really like the OTIS AR kit. Includes picks and scrapers and zips up into a neat little package.

u/MobiusTrobius · 2 pointsr/guns

Fuck the rod-based cleaning kits. They break easily and take up too much space. Get one of these, they're outstanding.

u/throwawayifyoureugly · 2 pointsr/ar15

I have the Otis MSR kit. Compact, has everything you need--overall a good value. I got it for less than $50, but still good at that price. I'd recommend it with a single caveat--learn how to fold the patches properly on the jag.

I had a "patch" (read: incorrectly-sized tshirt scrap) come loose just past the chamber. Stuck. Bought an actual cleaning rod (was planning to buy one anyway, in case of stuck rounds) and unplugged the barrel nicely. Other times I didn't fold real patches properly and they came off the jag. No problems when I did things properly.

I like that it included the bone tool and all necessary accesories.

edit: submitted prematurely

u/Dumplati · 2 pointsr/canadaguns

Thanks for the help.

Went with the following.

BLACKHAWK! Sportster Range Bag, Black

3 Trigger Locks

Chamber Flags

Targets

Stapler Staples

Cheap Earplugs

Cleaning Kit Should I also get a collapsible one? Was unable to find one on Amazon.

Eye Protection

Primary Ear Protection


Anything I missed?
[Secondary Ear Protection] (https://www.amazon.ca/gp/product/B001D8CRB8/ref=od_aui_detailpages00?ie=UTF8&psc=1) Incase my main ones fail, or I have a guest.

u/Hoed · 2 pointsr/longrange

I like a man/woman who speaks my language.

Enjoy:

Rod

Brass Jags

Patches

Clothes

u/thecday · 2 pointsr/guns

I hate the screw together rods, they are small, but prone to bending/breaking and dont always stay screwed together when spinning in the the rifling. Give me a one piece rod, high quality brass jags.

Liquids I use are the standard hoppes and then Remington 40-X Bore Cleaner and an array of oils. I use a silicone gun rag for the exposed metal.

Silicone Gun Cloth:
http://amzn.com/B0002IKAU0

One Piece Rod:
http://amzn.com/B000BY56FO

The best Bore cleaner I have ever found:
http://amzn.com/B0000D94RU

u/ink_addict · 2 pointsr/ak47

Here is the link to the kit.

u/spook777 · 2 pointsr/Glocks

Definitely the safety part, cleaning and disassembly (trust me its very zen experience once it becomes routine). I use Shooter Lube for my cleaning and oiling stuff. I also bought micro fiber cloths for it. Qtips are also very handy. Lastly I use an Otis 9mm ripcord after I use the included Glock brush. Keeps my barrels super clean.

Another thing to do is stockpile on ammo. Sounds very zombie-apocalypse, however i use 100-150 rounds per range visit and go to the range easily 2-3 times a week. And since you already paid the DROS, buy ammo on the day you pickup. Otherwise its a hassle and they charge you a $1 each time.

Practice-wise the best recommendation I gave my new-shooter friends was to “shoot small”. Everyone likes to get the “hostage” or zombie target and the range, but I told my friends to get the 5-circle targets and focus on grouping. Once they were relatively focused I brought out these 3” Splatter Target Stickers and placed them on the paper target and told them outside the sticker is fine but inside is better because it changes color. Within a few sessions their grouping went from a 12” grouping at 20ft (yes they were that bad) to 3-6” groupings. Still not marksmen, but the “shoot small” logic paid off.

Lastly once you master disassembly, and basic shooting skills using stock parts, a Ghost 3.5 connector might be good upgrade. After that a flat trigger might be worth trying. The Overwatch Precision DAT is budget friendly and has many a kudos from other shooters as well as myself. But learn your stock gun first.

I grew up around guns but never got into it until January this year. I’m a 9-month newbie so feel free to msg me on any info about mods or new shooter recommendations. I’m in So Cal too.

u/MrSpaceFlunky · 2 pointsr/Firearms

That logic does not make any sense to me. That wasn't even the point I was trying to make. Special "gun oil" is not needed to oil a gun. Who cares if Valvoline Synthetic motor oil is WAY cheaper than Hoppes Gun Oil?

u/Fivestar_fox · 2 pointsr/Gifts

If he's working too hard (which it sounds like) maybe gifts that could help energize/relax would be a good idea.
Here's my ideas.
For the bed: Super soft sheets, Some type of super cool pillow/Memory foam/Gel/Bamboo. A wake-up light alarm clock: https://www.amazon.com/gp/product/B0093162QS/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1
For his body: A massage/ epsom salt muscle soaks/Gel insoles /yoga session
Maybe some couples coupons? Is there a favorite meal of your's that he loves? Cook him that.
A random thing for gun lover's (my Husband has one and loves it) a gun mat: https://www.amazon.com/Glock-AD00062-Bench-Mat/dp/B00UT9RR9E/ref=sr_1_cc_5?s=aps&ie=UTF8&qid=1517519189&sr=1-5-catcorr&keywords=gun+mat

u/BillsBayou · 2 pointsr/Bonsai

You could hit it with a pressure washer, too!

At the ABS/BSF event in Orlando, Mike Knowlton told me he uses a pressure washer to defoliate his neea buxifolias WHEN LEAVES ARE GREEN of all things. Granted, you don't get the pressure washer right up on the branch. Just far enough away to take off the leaves. I used one in my latest videos to clean the bark of a couple of bald cypress bonsai.

HERE'S ONE ON AMAZON that is similar to mine, but not the exact one I have, so your mileage may vary.

u/commiezapr · 2 pointsr/ar15

This is all you need.

Works more multiple calibers as well.

Handguards are mostly personal preference. What are you mostly using your AR for?

u/Lupich · 2 pointsr/canadaguns

Seconded on the Otis!

u/drzenitram · 1 pointr/Taurus

A cold bluing kit is worth a try - I'm no expert, but it should protect your steel just fine.
https://www.amazon.com/dp/B000KKELM8/ref=cm_sw_r_cp_apa_rDCfAb9FJCTA7

u/Reingding13 · 1 pointr/guns

I'm getting this.

Seem good?

u/m6hurricane · 1 pointr/typewriters

I think I've solved what's making the space bar be a dick. Album of my powers of deduction. If you would be so kind, could you please take a look and let me know if this makes any sense?

Basically, I think the left one is straight while the right one is bent. That would mean that straight-up pulling the silver things left would result in the left one going from straight to bent while the right one goes from bent to less bent.

Maybe I should grab the right one and pull out slightly? Is there a better way to do this? So far I've just grabbed it with my hands.

Also, should I clean this with Hoppe's Gun Cleaner and a tooth brush and then oil it with Hoppe's Gun Oil?

I'm sorry to burden you with my problem yet again. I just not sure who else to ask... I hope the gold at least helps to make up for it, as I really appreciate your time.

u/calite · 1 pointr/M1Rifles

I use this kit from Otis for cleaning the bore: https://smile.amazon.com/gp/product/B0000C52A5/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

It uses a flexible cable that you can use to pull brushes and patches through the bore, only from chamber to crown. The cable is plastic coated and should do no damage.

It takes me a lot of work to get clean patches unless I first use a larger brush to clean the chamber before cleaning the bore. To clean the chamber, I use the .38 brush from the Otis kit attached to the Pro-Shot Flexible Chamber Cleaning Tool, https://smile.amazon.com/gp/product/B008P8F13U/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

With this tool, you can work the cleaner-soaked brush into the chamber while rotating a few turns. This really speeds things up, and I do not need to worry about stuck cases from a dirty chamber.

Here is a video from Ruger on cleaning the Mini 14, so you can see the technique they recommend: https://www.youtube.com/watch?v=KJ_XSF47s9s

(They make no mention of using a chamber brush.)

u/NCH_PANTHER · 1 pointr/Random_Acts_Of_Amazon

That's awesome!!!! Congrats!

I have one thing to be excited about and that is I may be getting a job as a weapons master for a certain TV show(cant say until it's official. I signed an NDA). This has been in the works for about 7 months now and Derek(my current boss and gun shop owner) and I are in final talks. Im really excited.

MCubb may be just a tad bit excited today!

Related Item

u/Midniteoyl · 1 pointr/guns

I ended up with this one when it was on sale for $35. Has everything and plenty of room for cleaners/patches/etc all in one place and easy to carry.

u/cawpin · 1 pointr/guns

Buy this Otis kit. It will clean everything you own. They aren't overkill for anything; they're a great cleaning kit.

Bore snakes are nice for a quick wipe but shouldn't be used for a long time because they collect pieces of what they clean out and can scratch the chamber/bore.

u/cosmos7 · 1 pointr/Glocks
u/slapadebayass · 1 pointr/Glocks
u/Predditor_drone · 1 pointr/guns

Could you use something like this to clean from breach to muzzle? http://www.amazon.com/Otis-Tactical-Cleaning-System-Brushes/dp/B0000C52A5

u/Princey1521 · 1 pointr/guns

would just one of the basic rifle cleaning kits do? That's primarily what I've been using

Edit: this guy except obvious multi rifle not just ar

u/hkp2000 · 1 pointr/canadaguns

Would this be the kit you speak of?

u/theamazingronathon · 1 pointr/CCW

You're going to hear a LOT of different things. My advice is to read as much as possible. Don't just take one person's word as gold, because what works for one person doesn't necessarily work for everyone else. My opinion? $600 isn't enough to be competent and comfortable with a setup, if you're not already experienced with guns.

On a budget, here's what I'd do:

First, I'd go with 9mm. I'm a firearm enthusiast, and I primarily shoot 9mm. There are pros and cons to both, but to me, the single biggest benefit of 9mm comes down to affordability. I can buy twice as much 9mm as I can .45. Thus, I can shoot twice as much, and be far more prepared. 9mm won't hit quite as hard as .45, but it hits hard enough to kill. You'll be able to carry more 9mm than .45 ammo, you'll be more accurate (because there's less recoil from 9mm), and you'll be trained better before anything even happens.

So the bare minimum starter package for a gun owner (regardless of caliber) should include a firearm, ammunition, safety gear, and a cleaning kit. Forget about carrying, for the moment. Without those basic things, owning a firearm is completely pointless. Having a firearm in your home that lives in a drawer and can be used against home invasion is better than not having a firearm at all, even if you don't ever carry it outside of your home. And it's a good starting point. A dirty firearm doesn't fire. You must be able to maintain your firearm with regular cleaning, and oiling. A dirty firearm malfunctions. A rusty firearm malfunctions.

On a tight budget, I'd go with a Taurus Millennium G2. People on here love to bash Taurus as a brand, and maybe they deserve that bashing. But the Millennium G2 (that's 2nd generation of the Millennium) get great reviews. Look it up, read reviews of any firearm you're thinking about. Watch videos on Youtube. Don't just talk to people who have never handled that specific model, but do as much research as possible.

So, here's the list-

Taurus Millenium G2 - $209, free shipping. + $35 (average) FFL fees to get it from your local gun store.

Break Free CLP (cleans, lubes, and protects- all in one cleaning product) - $7.99, plus something to wipe the bore($10.97), plus some rags and an old toothbrush to clean the gun.

Disposable ear plugs. Not as good as over the ear, active noise cancelling, etc... but they're a start. $7.86

Shooting glasses. $7.19

This is a start, and it's half of your budget. The other $300 can be put toward something like a holster, a belt, ammo, and classes. I highly recommend classes. If you're not intimately familiar with firearms, they're basically a must. Even if you are, they're still a good thing. Even without classes, you'll still need a range, and ammo adds up. Defense ammo is going to run you ~$30/box, and I recommend shooting that at least occasionally, so that you know what it feels like to shoot (hint: it's different from 115 grain target ammo).

Then, shoot as much as possible.

u/HBHartman · 1 pointr/guns

I would suggest getting something like this it will have everything that you need, and a lot of brushes for other calibers if you end up getting them. Other than this kit, you will need a (preferably lint free, I like to use microfiber) cloth, and a small brush like a toothbrush (these are great), and a powder solvent (Hoppe's No. 9 is great stuff)

u/Quixotic_Knight · 1 pointr/airsoft

I haven't done it, but the Amazon reviews from people who have done it suggests it works.

Gun sight paint https://www.amazon.com/dp/B071NQNZ13/ref=cm_sw_r_cp_api_i_TIpkDbTS6SNTA

u/Nalortebi · 1 pointr/gundeals

I dunno about you, but I find this kit to be worth the dough. Small enough to tote in my range bag and exceptionally well equipped. I haven't found a brush that isn't compatible with the threading.

u/FreedomPullo · 1 pointr/knifeclub

I haven't tried it myself but I have seen blued 1095 on the forum a few times. I have an SR-101 (proprietary 52100) Busse I would like to strip and have been considering giving it a try. A bottle runs $10-$20 and most sporting goods stores.
https://www.amazon.com/Birchwood-Casey-Liquid-Gun-Blue/dp/B000KKELM8

u/sjgreeley · 1 pointr/rockhounds

Well the kind of acid you use is completely dependent on the rock itself and the mineralization you are trying to clean off. What kind of samples are you trying to clean?

Also, I personally have one of these.

https://www.amazon.com/GENUINE-ARROW-SPOT-CLEANING-GUN/dp/B00CMFMSB0

It gets rid of mud and dirt easily, and I have even had some luck blasting off calcification on some specimens. You just can't use the fine stream on softer material.

u/HoardingMinimalist · 1 pointr/guns

Okay forget the “kit” (pre-made) and build your own. For what you have, this is my suggestion:

Buy a .22 boresnake this will cover your .22, 223, and a few other calibers (like 5.45x39 if you choose to get an AK74 in the future). Use this for a quick clean after a day at the range. You could also pick one up for other calibers as well for a quick clean.

Buy a few one piece cleaning rods . I prefer Dewey one piece brass rods with the handles. Probably a shortish one for your .45 and long shotgun rod for the 12gauge. For the .22 and .223 I’d get a stainless model just because it’s slightly harder to bend with it being such a small diameter.

Next get a jag kit . You will need to purchase the 12gauge jag separately.

Buy some cotton swabs to use with the jags/cleaning rods. I haven’t found any that I’ve been happy with where price & quality meet so just try some that look decent. Maybe someone else will chirp in & help me out here.

You could also grab a few brushes that would thread into your cleaning rods. I never end up using them since I can get most everything out with the jags.

Ballistol this is the best (obviously this is a personal opinion but I love the stuff).

A few old toothbrushes for any nasty grim you come across

A big pack of Q-tips (that brand, other brands leave tons of fuzzies )

Old rags

This is my routine: run a cotton swab soaked in Ballistol down the barrel & let soak -> wipe off any major dirt & debris with an old rag then with Q-tips & toothbrush if necessary (break down firearms far as needed for adequate cleaning) -> clean dirty areas with a Ballistol soaked Q-tip then follow up with dry Q-tips and rags -> run two dry cotton swabs down the barrel one after the other -> if last patch comes out clean then that’s done, if not do one wet & two dry again -> if all is well & clean you can reassemble (ensure there is no Q-tip fuzz stuck anywhere) & you’re done.

If this was extremely basic & you are far above this little guide, I am sorry. I did not search for the absolute lowest prices so the links provided are simply a quick reference. Hopefully some of this is helpful

TLDR: Boresnakes, one piece cleaning rods, jags, optional brushes, cotton patches, Ballistol, Q-tips, toothbrush, rags, then I gave my cleaning routine.

u/humanefly · 1 pointr/canadaguns

Maybe one of those little Otis cleaning kits? http://www.amazon.ca/Otis-Technology-All-Caliber-Cleaning-System/dp/B000E5CQV2/ref=sr_1_2?ie=UTF8&qid=1457047149&sr=8-2&keywords=otis+cleaning+kit

I was going to say an Ontario SP10 Marine Raider Bowie because you can use it like a machete to clear your way through thick brush, or a small axe but apparently they've like doubled in price in the past decade. I suppose that's to be expected

u/Nightlybane · 1 pointr/ar15

I have this for my cleaning kit. It's really nice. Not too much to cleaning https://www.amazon.com/M-Pro-Tactical-Universal-Cleaning-Kit/dp/B003H6DHBS

u/JorDamU · 1 pointr/golf

What you've done looks awesome! And I can say that you've taken the first step down a dangerous path! I started restoring putters as a side hustle almost 10 years ago (almost exclusively Cameron, but some Bettinardi), and once you get the hang of it, you can turn some pretty cheap and sloppy putters into great refurbs.

If you are at all interested in learning to add the original gunmetal look back to the putter, take a quick browse through golfwrx's Cameron Restoration threads. (I'll try to post a thread when I get back home.) You can turn a ~$50 investment into a $200+ sale, even more if you get lucky enough.

Link to the bluing kit I've always used:
https://www.amazon.com/Birchwood-Casey-Liquid-Gun-Blue/dp/B000KKELM8

Edit-- here's the restoration thread I was talking about: http://www.golfwrx.com/forums/topic/897086-scotty-cameron-rust-bucket-diy-step-by-step-restoration/

u/Slydersno · 1 pointr/pcmods

https://www.amazon.com/Gun-Cleaning-Mat-Rifle/dp/B00UWS9NSK

Gun cleaning mats also make a good mousepad, I think they are just firm rubber. You can get smaller ones for handguns and the likes.

u/c0mput3rn3rd · 1 pointr/battlestations
u/TurnaboutIntruder · 1 pointr/golf

That might actually look good with gun bluing

u/dorkov · 1 pointr/ar15

https://www.amazon.com/Otis-Technology-Tool-Carrier-Cleaning/dp/B01M8IB20Y Get this, spray your bolt head with CLP and then use this tool to scrape off that carbon. Works fast for me.

u/MyHoovesClack · 1 pointr/guns

Something like this for the 700 and this for the '94?

Thanks man.

u/ashleyapb · 1 pointr/VAGuns

I'd recommend Sterling Arsenal/Critical Koting. Best in the area IMO, and competitive pricing too. You could also use something like this gun blue kit for cheaper yourself.

u/That_Squidward_feel · 1 pointr/Firearms

>so does anyone have any advice for storage

Dry (low air humidity) would be ideal. Desiccant pads for your safe would be ideal (personally I use those silica bags you can toss into the microwave to recharge once they're saturated). While Glocks aren't particularly vulnerable to that, it's a steel item still, water and oxygen will make it rust sooner or later.

Depending on your state laws (I'm not American so this is second hand hearsay at best), you might also need to follow some "safe storage" laws. You already mention a safe, so you should be gucci.

>maintenance

Get yourself some decent gun oil (Break Free CLP seems to be popular) and a 9mm/.38/.357 cleaning kit if you haven't already. The basic variant is more than enough. And some patches.

There's no need to drench it in oil, just follow the Glock lubrication guidelines (it's outlined somewhere in the manual). Personally I just clean the gun, use a second patch to lube the inside of the barrel and then wipe everything else down with that patch (surface of the barrel, inside+outside of the slide, recoil spring).

Here's a video for you.

>modding

Technically yes, but honestly if this is your first firearm I'd focus on getting the hang of it first.

The four most popular "mods" are

  • replacement sights (Ameriglo seems popular, but you seem to have that one covered already)

  • triggers (APEX and a few others)

  • lights (the go-to seems to be the Surefire X300 or Streamlight TLR-1 HL - personally I have one of those TLRs too)

  • and reddot optics (either via MOS slide or by getting your slide milled - the go-to is the Trijicon RMR type 2, personally I have one with a Leupold Deltapoint Pro).

    >I don't even know where the safety is

    Glocks have internal safeties.

    >or how to disassemble it

    https://www.youtube.com/watch?v=FN9a-4pp6dQ

    https://www.youtube.com/watch?v=7gKnVbGg5BM

    ----

    >I don't know that much about guns besides what video games and playing airsoft as a kid taught me.

    Your best bet is a beginner handgun course (your local gun shop, gun rights group or the internet should yield the desired results - make sure the instructor is actually certified, not some snake oil salesman).

    A couple resources to get you started - ESPECIALLY the 4 safety rules:

    4 universal safety rules by ret. Army Ranger John Lovell

    NRA-certified handgun training course by Robert L. Weijland, US Firearms Training Association

    Pistol grip demonstration by Shannon Smith, Palm Beach Shooting Center

    There's more of that stuff on Youtube - ideally you watch a couple of those videos before you head into that course, that way you've heard most of the terminology etc. already, which helps a lot with not getting confused/overwhelmed/losing track.
u/SquidSauceIsGood · 1 pointr/ar15
u/TheCastro · 1 pointr/Hunting

If you're worried, you can get something like this : https://www.amazon.com/Otis-Tactical-Cleaning-System-Brushes/dp/B0000C52A5

I have one that I can clean every rifle and pistol I own. They easily attach to a strap or molle web platform. As others have pointed out, unless you're in the mud or water (or own a kimber or something that rusts super easy) you shouldn't need to clean, but it's nice to have the ability.

u/tletang · 1 pointr/canadaguns

I like to use the Otis pull through cleaning kit. I normally use hoppes 9 after a range visit and depending on how much I shoot a firearm I occasionally soak it in Wipe out

I pretty much never use a brush any more with this cleaning method, it's easier and quicker I find than scrubbing with a rod.

u/ayeonceagain · 1 pointr/ar15

I got a Surefire G2X Pro with this tailcap and this mount for the tape switch. So far it's been a solid setup.

Edit: Forgot to mention I mount the light with one of these and a V block & rings

u/WockaWockaSK8 · 1 pointr/guns

https://www.amazon.com/Otis-Technology-Tool-Carrier-Cleaning/dp/B01M8IB20Y

Botach makes one, too... but fuck Botach.

Scrape that bitch, CLP, and done.

u/Woundedkneecap3 · 1 pointr/guns

Bummer that OP deleted all their comments. Wonder what happened. I'mma not let what I wrote go to waste.

> Cleaning kits are usually separated into rifle, pistol, and shotgun kits. For rifles, pistols, and shotguns, there are different bore sizes. A "22 cal" bore brush is much too small for 30 cal rifle. There are some universal kits, like these -> Amazon Link, Amazon Link, but they might not have the right bits for larger bore handguns.
>
> If he is getting that handgun for home defense, a quick access safe might not be a bad idea, specially if kids or untrusted adults are around -> Costco Link. Preferable something that can be mounted/cabled into a nightstand, desk, or bed frame so it's not as easy for any potential robbers to run away with as easily.
>
> Or you can go the easy route and get him a gift card to cabela's or some other outdoors/hunting good store.

u/JamesonOnTheRocks · 1 pointr/Glocks

Leave the copper colored factory grease on the slide until it's gone. Hit up the range with a few hundred rounds. Some people clean the gun before firing. I just lubed the slide a little and fired 300 rounds before my first cleaning.

Start here: https://youtu.be/DZf4mUM10Vc

u/meeksdigital · 0 pointsr/guns

I'm a huge fan of the M-Pro 7 cleaner and oils. Very impressed with their ability to prevent build-up, and my guns seem to stay a lot cleaner than they did when I used other conventional oils and cleaners. I recently discovered that they make entire cleaning kits too. I don't personally own one of their kits, but if you're looking for an all-inclusive, they look pretty decent, and include the M-Pro 7 cleaner, oil and copper remover.

u/BlackArchHolsters · -2 pointsr/guns

I'd be real careful about this, Duracoat has some pretty nasty particulates that are very difficult to protect yourself from.

If rattlecanning, try Alumihyde or the Kyrlon grill paint.

Alternatively, you can re-blue it. Kits like this are relatively inexpensive and easy to use.

Edit: Disregard the Duracoat warning, apparently that's misplaced fear on my part.