Best jewelry accessories according to redditors

We found 468 Reddit comments discussing the best jewelry accessories. We ranked the 295 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Subcategories:

Jewelry cleaning & care products

Top Reddit comments about Jewelry Accessories:

u/wayward_Pockets · 84 pointsr/AskWomen

These leggings that I could wear every day bc they're so cute, comfy, & not see thru.

Shiny Satin Pillow Cases bc they stay cool and help prevent frizz.

Diamond Dazzle Stick cleans my diamond wedding rings as well as the sonic machine at the store.

I love these velvet tights so much that I made a close up pic of their pattern my cover photo on fb.

u/Retik8 · 42 pointsr/woodworking

Woke up to a lot of love! Thanks everyone for making me even more excited to show it to her. She’s definitely annoyed I haven’t asked yet so she might just grab the ring from the box and put it on herself at this point :P

To those curious about the wiring: I cannibalized this cheap amazon box and saved all the parts as buying them separate would have cost way more (it was $9). It came with two watch batteries wired to a resistor and a spring loaded pressure switch.
https://www.amazon.com/dp/B01HDWZ8O0/ref=cm_sw_r_cp_api_i_ktT3CbEYJDHV1

The hinges are 10mm barrel hinges that are installed using a 10mm forstner drill bit. They are really difficult to drill perfectly so practice first or buy a jig.

The carving on top is two elephants separated by a heart. That was really hard and would look way better with a cnc laser or engraver but hopefully she can tell.

Thanks again everyone for the compliments. You’re a great community!

u/Mischieftess · 20 pointsr/TheGirlSurvivalGuide

Either the brass plating came off the underlying metal (in which case polishing will just make it worse) or the brass tarnished. You can buy a polishing cloth that should do the trick, but you'll have to be careful to not rub it on the white thread or white shirt underneath or it'll leave smudges. Personally, I'd just remove the plaque permanently, it's going to be a lot of trouble to keep it looking nice.

u/cm357374 · 20 pointsr/EDC

This box sits on my nightstand. I’ll try my best to list everything. This is for the most part my entire EDC gear collection.

Top Shelf:

-Trayvax Axis

-9 round G43 magazine (Taran Tactical)

-Leatherman Wave

-Case Stockman

-G-Shock GWM5610-1

-Leather Apple Watch Band

Middle Nook Thing:

-Zippo

-AirPods

-Keys

Bottom Drawer:

-Citizen Eco-Drive

-Benchmade 940

-Victorinox Cadet (Green)

-Spyderco Delica 4

-Victorinox Cadet (Black)

-Spyderco Dragonfly (V-Toku)

-SOG Flash I

-Leatherman Skeletool CX

-Leatherman Juice S2

-Streamlight Stylus Pro

-Streamlight Protac 2L

Carry Gun:

-Glock 43

-Taran Tactical +1 Magazine

-Talon Grips

-Ameriglo I-Dots

I usually wear an Apple Watch which was on my wrist. Happy to answer any questions!

Link to the box: https://www.amazon.com/dp/B000VFHGP6/ref=cm_sw_r_cp_api_i_lFsPCbXD0KANV

u/wh0ville · 13 pointsr/woodworking

Not wood but same idea.

Noble Flat and Slim Pop-the-Question Jewelry Engagement Ring Box with Secret Surprise Elements (Deep Charcoal Black) https://www.amazon.com/dp/B079ZKZ1ZQ/ref=cm_sw_r_cp_api_wpKUBbA0P9XW8

u/swilson215 · 12 pointsr/weddingplanning

I got this Dazzle Stick from Amazon right after we got engaged. Best purchase I've made on Amazon in 2017, and since then have ordered it for each of my friends who have recently gotten engaged. 10/10 would buy again!

u/SparkleBrick · 11 pointsr/trees

Thanks! Found two different options for anyone else who is interested (below). Is the weed still fairly fresh by the time you get to the end of the month or does it get a little dried out?

Heavy Duty - $16.23

Jewelry Organizer - $10.99 - Similiar to OP's - The one I may get and attempt to make it airtight.

u/wwduntovdo · 10 pointsr/EDC

Tungsten wedding band

Storus money clip

Benchmade 940

Foursevens Mini ML-X

Citizen Men's BM8180-03E Eco-Drive

Boker Vox access tool (on keychain)


Kingston Digital DataTraveler 32GB (on keychain)

EDIT: Valet Tray http://smile.amazon.com/dp/B007PKJ2PW

u/disgruntled_pedant · 8 pointsr/funny

I got my sister one of these for a little present once. I also got one for my mom. Several days later, my sister remarked that the lip gloss I gave her made her mouth burn.

> Me: I didn't give you any lip gloss, what are you talking about?
> K: The one in the red tube.

I don't remember the last time my mom and I laughed that hard at my sister. About six months later, Amazon had those on lightning deal, and I sent her a link telling her that her favorite lip gloss was on sale.

u/ninepaw · 6 pointsr/weddingplanning

This reminds me that I've been forgetting to clean mine for the past few weeks... I normally clean it every two weeks or so using one of these and I'm always so impressed by how nice my ring looks afterwards! I'm sure a professional cleaning does a better job; but this is a nice, easy way to do it in between!

u/kkinderen · 5 pointsr/fountainpens

Here's what's in my toolkit...

Polishing cloth

Fine Mesh Pads

20x Loupe

10x Loupe

! Canned Air

Cotton Tipped Applicators

Goulet Mylar Paper

Goulet Brass Sheets

Goulet Grip

Goulet Silicone Grease

! Careful with the canned air. It can be the cause of some funny and not so funny accidents.

A bright desk light with a magnifier comes in handy.

u/AsherMaximum · 5 pointsr/electronic_cigarette

For that particular one it is a deal. I found it at amazon for $60.

However, there are others on amazon with better reviews for less.

u/Nemo_Griff · 5 pointsr/lockpicking

Hallow! /u/dragon1291 posted a great image for a pinning kit but there are a few things missing. This is a comprehensive data sheet on schlage pins and keys. If you want to build your own pin kit here are my suggestions:

  • DO NOT BUY A PREASSEMBLED KIT! I don't know why, but they always cost more.

  • CLK Supplies is a great place to find what you are looking for. Using the data sheet that I gave you, you can get "Universal" pins in the correct heights. Here are the keypins in many sizes by .003" increments. Here are the Top/Master pins also in .003" increments. Here are their assortment of springs and these are their security drivers. If you don't really want to have 300 serrated pins and 600 spools, you can always go for their Security pin kit that has a little bit of everything including the bump stop pins. If you want to use the bump stop pins, just put only 1 in each lock. Anything more than that isn't necessary.

  • This is what I use for my pin kits. The price is cheap and it works well for me. They do ship from China so you have to wait several weeks to receive it. Each of the chamber walls go all the way to the top so there isn't any spill over. I would however use something like a pice of tape to make sure that you don't pull up any of the side walls by mistake.

  • I would get Sparrows aluminum followers because the resin ones don't last as long as you would like.

  • Pinning tweezers are a must! I would suggest that you pick up Sparrows 120mm tweezers. I have their 99mm tweezers and I wish I got the longer ones.

  • T -pins are fun to work with when you advance but they aren't easy to come by. You can put those on the back burner for now. Here are the only ones that I have come across. I haven't used them so I can't give you any kind of review on them.

  • You can go with can go with the Sparrows mini pinning mats, their full size mat or a pinning tray. This is a cheaper tray, and I do mean cheaper. I think it might be made from compressed foam. You can also go with the premium steel pinning tray. Just be aware that they are very small. Like smaller than your phone small.

  • Core shims are VERY useful! You can find them in different places. Like here, here, here or here. Just to name a few places.

  • Make sure that you watch various videos of people gutting their locks to try to predict how things might go wrong.

  • When you start with your hands on work, go slow and be very deliberate. If you forget (or intend) on leaving any keypins out of your locks ALWAYS remember to remove the corresponding driver and spring otherwise you will have to force the plug out and ruin a spring and possibly the plug.

    Now, if you don't want to have a hefty pin case filled with 2,400+ pins I can always help you out there. I have been selling pins to other users here in smaller amounts for cost. Feel free to hit me up.
u/NatesYourMate · 5 pointsr/DIY_eJuice

I can add on to the ultrasonic jewelry cleaner bit. Got one (nicknamed the Turbo Steeper) about 8 months ago and use it to "Turbo Steep" my juices. Here's the deets.

This is the model I have. First, some experienced wisdom: These guys are good for about 45 minutes when the reservoir inside is full, and will get your juice plenty warm enough to shake well even after its been "shaking it" for you (using that lightly as the main shaking is going to be done by you). I recommend a rubber band and a beer bottle cap to hold the button down for that long, as it has an automatic shutoff after 3 minutes. Some people use binder clips, but this causes the lid to be open and this thing is fucking LOUD without the lid closed, depending on how much you have in there. That pretty much covers the tips and tricks part.

Does it work: Fuck yes it does. I've got some pictures of Blue Dot Vapor's Milk of the Poppy, one with 6 hours of TURBO STEEPING on and off, and another with none, shown here: http://i.imgur.com/DS14Kx4.jpg

Is it worth it?: I don't know, that's up to you. Basically what you've got here is an effective way to make your newly created juice ready to be vaped at full flavor in about a day and a half if you've got some time to just hang out and binge Netflix or something. If you think that $30 is worth not having to wait a few days/a week for your juice to not taste like the salty grundle of an elephant in heat, then this thing is for you, if you're into that kind of shit, then save a few bucks for that next trip to Africa so you can get weird.

Sidenote: These are also incredibly effective at cleaning atomizers of all kinds. Make sure to pull the coil out (unless you want to try and wash it with alcohol in it, I tried that and it worked okay-ish and could post a bit more about that if needed), and pop everything in there for about 2 cycles or 6 minutes and everything will be sparkly again.

u/minniemo · 4 pointsr/weddingplanning

Hmm. I have gotten:

  • a robe, a necklace. and a straw/water tumbler with my name on it
  • a bracelet in color of our choice (worn on day of). she also paid for makeup and part of our dresses.
  • a gift bag of various items: moleskin bandages, diamond dazzle pen for the engaged/married gals and fuzzy socks for the single gals, yeti tumbler with our names on them, and heartfelt book/journal of what my friendship means to her.

    I'm getting my sisters/bridemaids a little ring with an airplane on it, because 1. we hate excess, impractical stuff 2. it's significant because I live far away, and i'll be writing something about how we're always sisters no matter the distance.
u/gypsywhisperer · 4 pointsr/EngagementRings

It looks like it's a box similar to this one!

My husband used a conventional ring box in his front pocket and proposed to me after we saw The Lion King on Broadway (actually on Hennepin in Minneapolis, but whatever) and when we got there, there was a couple that was split up on either side of us, so I offered to trade seats with the man so he could be with his wife, and then my husband had me sit on the other side... I guess it was so I wasn't against the ring box! Also, the hinge set up the metal detector when we entered the theater, so the guard pulled him aside and asked if he had anything metal in his pocket and he showed the ring to the guard (I had already walked ahead because I didn't realize he got pulled aside) and the guard wished him luck.

u/TheOblongGong · 4 pointsr/KingdomDeath

I use a plastic compartment box that they sell for jewelry with removeable inserts in it. I've recently started throwing magnets on some of the inserts just to keep all my hands and stuff locked in place, although this step is probably unnecessary if you're not going to paint everything.

Amazon link here

Images of my setup here

Also this guide really helped me figure out how I was going to magnetize. I go 1x2 on magnets in the arms and hands instead of 1x1 because that's where I have the most grip issues, but it's a great guide if you haven't seen it.

u/radiowave911 · 4 pointsr/turning

I use something similar to this: https://www.amazon.com/Adjustable-Compartment-Plastic-Storage-Container/dp/B00MUI5LZO

I use a Ptouch labeler to label the compartments as to what pen the bushings are for.

u/joetekcor · 4 pointsr/DunderMifflin

Don’t know if this is the same one in the video. Wingostore 30 Notes Hand Crank Music Box Movement with Copper Gear DIY Make Your Music Tool Kit (30 notes Copper Gear movement) https://www.amazon.com/dp/B0774TSP3T

u/margogogo · 3 pointsr/weddingplanning

My favorite gift I got myself is the "Diamond Dazzle Stick." I also got it as a stocking stuffer for my brother's new fiancee.

https://www.amazon.com/Connoisseurs-1050-Diamond-Dazzle-Stick/dp/B00459VM6I

​

If you know she plans to get engagement photos taken, you could get her a gift certificate (or a homemade one so she can redeem it wherever she wants) to get her hair and/or makeup done for the photos? Ooh when I first got engaged I was obsessed with having my nails on point all the time so in general if she likes manicures you could get her a gift card to her local nail salon!

​

You could also give her cutesy homemade coupons for things like "good for 1 hour of helping you sift through vendor reviews on the Knot" or "good for 1 hour of listening to you vent about wedding stress."

u/xtinalala · 3 pointsr/weddingplanning

This is what i do:

First, i soak the ring in hot water + liquid dish detergent for 30 mins. Then, i use a pen with a soft brush to scrub all the nooks. Had my ring for a couple of years with no issues so far. I don’t think you need anything really strong - a lot of those machines are unnecessary. A good professional Cleaning once a year helps as well.

Connoisseurs 1050 Diamond Dazzle Stick https://www.amazon.com/dp/B00459VM6I/ref=cm_sw_r_cp_api_71VfAb0DBPCZY

u/mahourin · 3 pointsr/AnimeFigures

I've traditionally kept all of them inside the boxes like you're doing, but a few months ago when i pulled out some of my first ones (3-4 years ago) I did notice some of that sticky residue. It was nothing that a damp cloth couldn't clean. Depending on the size of your collection, maybe air them out once every year or half a year?

I've also heard of ppl buying containers with a lot of boxes just to hold the smaller parts.

something like this

u/TheOriginalFaFa · 3 pointsr/whatisthisthing

It's a pocket dump tray. You dump all your daily stuff in it like phone, pen, knife, wallet, headphones, etc...

HappyDavid Leather Bedside Storage Tray, 1-Coffee https://www.amazon.com/dp/B016Y3PN3U/ref=cm_sw_r_cp_apa_duYxzb9N6XDK9

u/ET318 · 3 pointsr/NoStupidQuestions

honestly, Id try making something else. Makeup is fairly complex and best left to the professionals. Instead, you could learn how to make a special meal, or if she is into jewelry you could make a necklace tree or just a nice jewelry box.

u/ad273 · 3 pointsr/askwomenadvice

Diamond dazzle stick is the best thing I’ve found for a quick clean at home. It works so well!
Diamond Dazzle Stick

u/britneymisspelled · 3 pointsr/JustEngaged

I got mine off amazon, I think you can probably get them at some jewelry places too. It’s like a little brush filled with gel cleaner that you twist up - you just brush your ring with it and then rinse it off. It makes it SO sparkly! I make sure to clean the side stones well and the bottom of the ring and rinse it really well. They’re amazing.

u/JonnyApplePuke · 3 pointsr/transformers

Those rubber bands are gonna bend your cards and press dents into them. Try getting some of these https://www.amazon.com/Crystal-Hinged-Plastic-Trading-Storage/dp/B005FSWSZM/ref=zg_bs_2358923011_12?_encoding=UTF8&psc=1&refRID=295Q11P414JD6MYB5YY9 (Probs cheaper at your local card shop)

u/doki36 · 3 pointsr/femalefashionadvice

I store my earrings and some small/dainty necklaces in this jewelry box. The rest of my necklaces and the few bracelets I have are in a tray similar to this. I mostly have earrings, and only a few necklaces/bracelets, so the box works well for me.

u/MatchesMalone_247 · 2 pointsr/knifeclub

My wife got me a new EDC organizer to try and help me rotate through the collection a little more frequently. Figured it would be a good time to post an update.

Left, Top Down:

Microtech UTX-85

Berg Blades Iron Pup

A Purvis Progeny

Kershaw Leek

Kershaw Copper Natrix

Honey Badger

Top Center:

Kizer Ti Mini Sheepdog

Right, Top Down:

Nova Blades Mini Gentleman’s Tanto

Sharp By Design Micro Typhoon

Ray Laconico Custom EZC

MBK EZC

Kizer Mini Intrepid

Kizer Ursa Minor

The organizer for anyone interested is This One

I’ve narrowed down the collection a good bit, but I’ve still got some trimming to do. Not sure which to keep and which to put back into the world.

u/signint · 2 pointsr/Gunpla

I do a snap build first just as you are doing. After that I separate by how it is separated in the manual, usually head, foot, leg, etc. so that I don't have one large "pail" of parts. Even this https://www.amazon.com/Adjustable-Compartment-Plastic-Storage-Container/dp/B00MUI5LZO/ref=sr_1_2?ie=UTF8&qid=1468423184&sr=8-2&keywords=adjustable+storage+container can be useful for separating parts. When I put them on skewers, I keep the same separation process. one set of skewers per limb.

u/mothaofdragons1 · 2 pointsr/wedding

I have moisannite and this works great! Researched if it would work before buying too

Connoisseurs 1050 Diamond Dazzle Stick https://www.amazon.com/dp/B00459VM6I/ref=cm_sw_r_cp_api_i_GRytDb0G888YK

u/HermD · 2 pointsr/knives

Apache cases from harbor freight if your looking for a pelican style

For this one from Amazon if you're looking for fancy

Stock Your Home Luxury Mens Dresser Valet Organizer for Watches, Jewelry and Accessories - Large Jewelry Holder and Display Case (Black) https://www.amazon.com/dp/B000VFHGP6/ref=cm_sw_r_cp_apa_i_jbrqDbF6RER9Z

u/jacob3ds · 2 pointsr/Stretched

I just use one of these, but mine is a bit smaller. I like how you can move the small dividers around.



link



I just got mine from the dollar store actually, so it was only around $2 and has plenty room for the jewelry I have.

u/modern_quill · 2 pointsr/satanism

Ree-hee-hee-heally... *goes to look*


Edit to add: For any curious here is an Amazon link.

u/thesunstillrises · 2 pointsr/weddingplanning

I bought one of [these jewlery cleaning sticks] (https://www.amazon.com/Connoisseurs-1050-Diamond-Dazzle-Stick/dp/B00459VM6I/ref=pd_sim_201_1?_encoding=UTF8&psc=1&refRID=WQKFFYBX4TKJHHSJV1H7) and love it. I also try to get it cleaned at the jeweler every 6 months.

u/BraveLilWarrior · 2 pointsr/AnimalCrossing

Thank you! I bought a DIY 30 note music box from amazon (https://www.amazon.com/Wingostore-Notes-Movement-Copper-movement/dp/B0774TSP3T/ref=sr_1_1_sspa?ie=UTF8&qid=1542085413&sr=8-1-spons&keywords=30+note+music+box&psc=1). In order to make sure the song was arranged properly, I used an android app called Music Box Composer and then printed and punched holes on cardstock paper. It was a long process but definitely worth it since my sister really appreciated the gift.

u/wdziemia · 2 pointsr/SKS

I use Blitz Gem & Jewelry Cleaner. Its a clear high concentrate liquid so you only need 1 cap per 1 liter of water or so. Never tried ultrasonic cleaner with simple green so Im not sure how it compares. Ive had great results with Blitz so far.

http://www.amazon.com/Blitz-Gem-Jewelry-Cleaner-Concentrate/dp/B000F1SCU4/


u/margalicious · 2 pointsr/Random_Acts_Of_Amazon

Is this how I enter?

placeholer.

Upvoted.

Item.

u/RedS5 · 2 pointsr/DnD

A tip to the wise, I use one of these as a rolling tray. It really keeps the noise down and keeps the table/dice from getting chipped. Bonus that it stores flat with my notebook.

u/universtounding · 2 pointsr/DIY_eJuice

So would you just do the flavoring and of together? I have a big mix with nice in it already. That's why I ask. I am looking at this ultrasonic heater link

u/ahapxir · 2 pointsr/satanism

I own this necklace and its very well made

this is probably the most accurate and satisfying Baphomet statue appearance, tho I have not ordered it yet as it's quite expensive

Here is a satanic pentagram ring, or alternatively, here is a Baphomet ring

here is a Baphomet Jewelry Box, and here is an incense cone holder where the smoke comes out of Baphomet's mouth

Heres some extra stuff:

mortar & pestle

satanic bedtime stories

Baphomet Wall plaque

Baphomet Poster

pentagram ritual bowl

ritual knife, do not cut anything with it

Hope this helps

u/dangledorf · 2 pointsr/boardgames

It is a really really solid game, and if you end up loving it as much as we did, there are some very simple amazon purchases you can make to make setup take <5mins.

Power Tile holder - Cut off 1 row and the binder holes and you can store all of the power tiles in here. These fold in half and fit perfectly in the box. Setup is as simple as taking the 3 sheets out of the box and done!

Player boxes - Put each colored players pieces in these boxes (battle cards, miniatures, prayer point tracker, turn tracker, and action tokens). With the last extra box, put the Divine Intervention cards and all of the small extra silver/gold action tokens. If you can find ones that are slightly deeper you could even fit each of the 3 colored pyramids.

Victory Point holder - Holds all of the victory points in their own compartments.

u/sleepynate · 2 pointsr/RBA

I've got this one and it's great. Can set it up to 8 minutes which is perfect. I use 1 drop of dawn detergent and give it a little swirl before I put everything in and it just cuts all the grime out of the little nooks and crannies you'd never be able to reach. It's really neat to sit and watch little bubbles of crud get shaken off your contacts, and much nicer than taking fine-grit sandpaper to them since you don't have to worry about taking off plating.

For those looking for an ultrasonic cleaner, spend a few more bucks and get one that's a few bucks more, you'll be glad you spent the extra $10-20.

u/theangstfulvaper · 2 pointsr/electronic_cigarette

Last one? Awesome.

btw - here's the polishing cloth I picked up. It's huge. I've cleaned both pins a good dozen times and I think I've made about 3% of the inner cloth black. heh.

u/repete66219 · 2 pointsr/Wetshaving

This one works well.

u/imurkt · 2 pointsr/sailormoon

try a silver polishing cloth like this. It's probably just a brass coating over nickel, so be gentle at first to get a feel for how thin the coating is. It looks like it's just tarnish on the brass.

I'm not sure about storing but maybe try wrapping it in tissue paper or giving it a weekly polish if you have it on display?

u/yukifan01 · 2 pointsr/Random_Acts_Of_Amazon

I am in need of these card cases, I got a few case-less decks over the holidays and i need something to put them in.

Easy Peasy Lemon Squeezy

u/ShakeWeightMyDick · 1 pointr/DnD

Here’s a leather one that’s not marketed as a dice tray, so it’s cheaper ($8).

u/redbic · 1 pointr/DIY_eJuice

I have this one but it only has one preset mode, 3 minutes I believe. I'd spring for this one as it has an 8 minute cycle.

I've dealt with the 3 minute cycle by setting it on my desk and just clicking the power button every time it finishes while I'm on my computer.

For steeping i just use hot water. For cleaning my mods/attys I use a water/vinegar mix.

u/feawennenharma · 1 pointr/organization

Makes sense! I would maybe add a nice jewelery stand, e.g. Sth like this https://www.amazon.com/Inviktus-Jewelry-Display-Necklace-Organizer/dp/B015PCQZG0 :)

u/MKittyFantastico · 1 pointr/blogsnark

My mom always puts a version of these ring cleaner sticks in our stockings!

u/mjhc · 1 pointr/Random_Acts_Of_Amazon

I never win at these things, but THis jewelry holder is pretty neat!

u/meanie_bunnie · 1 pointr/weddingplanning

This. I had two tiny white gold spheres put in the inside of the ring and I did develop a callus. Luckily it is in the inside of the finger fold, so no one sees it and it did stop the ring from spinning.

I use this for cleaning. You have to wet the pen and rinse it out but the long but firm bristles help for the cleaning of an elevated or intricate setting.

u/Gigantorxxviii · 1 pointr/electronic_cigarette

Cheers. I have silver jewelry that I polish weekly with this (It also works nicely on my brass Nemesis), so tarnish removal is no problem. Thanks for the advice.

u/Mnemonix23 · 1 pointr/Random_Acts_Of_Amazon

Mischief Managed!

There's an overarching theory behind how these will all help with a school experience. Which is, basically, that you need to have fun in between studying. All work and no play makes jack a dull boy, goes the saying.

  • So, since we're talking about wine, I thought I should point out that one of my favorite ways of enjoying wine is with a nice bath. And what better way to make that prospect quite a bit safer, than with this piece of heaven?
  • Next, we come to brooms. What else would a wizard or witch ride? You know what else is interesting about witches? According to Harry Potter, they basically enjoy a tickling sensation while pretending to be burned at the stake (I swear I remember this from the books). Since they're already having fun with it, I think they should have even more fun by turning the flames colors.
  • You know who wears a lovely hat? Well, bonnet. A pretty, floral bonnet. Captain Mal Reynolds. I could surely use this to maximize my time enjoying Captain Mal's world.
  • This one is a tough one. Because there are so many books I could want, but that's such a traditional explanation... So, since we're talking about books as a journey, I really wanted to put a choose-your-own-adventure book. But it hasn't come out yet, so I'll have to content myself with this journey provoker.
  • Moving on to trunks. Trunks are storage, right? And I've got a bunch of jewelry that's just begging for a home. This looks like the perfect place for it.
  • Finally, we come to capes. Superheros, wizards, Sherlock Holmes. All these people have a history of wearing capes. And wizards are a strange people, and we sometimes need to work to understand strange people. This book might help guide the way.
u/perfectzebra · 1 pointr/knifeclub

I don't own one, but have been thinking about picking one up for myself. Amazon has a few options.

u/Risingsea · 1 pointr/minimalism

That is one and works.

The one I'm using is more similar to this one:


jewellery display

u/misscamels · 1 pointr/Moissanite

My best friend uses a dazzle stik on her moissanite engagement ring and it’s perfect even after years of use and abuse. (She’s a bank teller)

u/gvxo · 1 pointr/AskWomen

My fiance made me wood ledges with hooks (similar to these). I use them for my longer necklaces and bracelets- everything is easy to see and no tangled jewelry. I keep earrings in an organizer box and everything else in a pretty wood jewelry box.

u/hopthebop · 1 pointr/Moissanite

I was using a toothbrush + dish soap, but I recently bought this cleaner pen for travel and I'm converted. I thought it would be a hokey gimmick but it really left my ring sparkling with just a cursory scrub!

u/cleric3648 · 1 pointr/malefashionadvice

What you're looking for is called a Nightstand Caddy or Valet Tray. It's a good way to keep everything organized, in one place, and safe from the cats.

Here's a good example from Amazon that might fit your purpose. They can get as expensive and elaborate as you like, or as cheap as you want. Personally, I went to Ikea and got these so that I can close it at night and not have the cats eat my glasses.

u/sofauxboho · 1 pointr/electronic_cigarette

They do still make the Provari, and even have the older versions. And they're still expensive! But if you're willing to invest it really is exactly what you describe wanting for the way you vape, minus the TC stuff. And they really do last. I beat on mine for a year and a half and only stopped using it when I "upgraded" to higher output but worse made devices.

The corrosion and gunk issues you've described would explain the resistance variance you've observed. Electrical connections really want to be clean. Even oxidation or corrosion you can't see will have an effect. If you can see it, it will likely have a major effect. I'd suggest a simple ultrasonic cleaner and some scrubbing. I have this $40 model and it works a treat: http://www.amazon.com/Magnasonic-Professional-Ultrasonic-Instruments-MGUC500/dp/B007Q2M17K

If you want to get super serious about cleaning (and you might want to!) grab some of this to go with: http://www.amazon.com/gp/product/B000F1SCU4/ref=pd_lpo_sbs_dp_ss_2?pf_rd_p=1944687722&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B007Q2M17K&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=05BD3DRA83NHH7PY2V62

And you're right. I know people who keep the same Ecig for years, and I know people who post about ecigs on the internet, but not anybody who does both. Good on yah for actually getting your money's worth out of your gear! I hope you can find something that'll hold up. I will say that my authentic Kayfun didn't degrade the way you describe, and I had it for a year. You might try and figure if yours is authentic or not.

u/freeseasy · 1 pointr/woodworking

I bought this box, took it apart and threw the guts into the box I built. I had to cut in a small mortise to hold the switch.

u/Adeno · 1 pointr/Random_Acts_Of_Amazon

Here, let me help you out :D These are all in the $10 to $20 range, while others go from $20 to $30. The first section is for the banks... I added some actual toys in the other sections just in case :D

Godzilla 1989 Coin Bank

Back to the Future Money Box

Bulldog Bank

Life-Like Pug Bank

Parrot that Eats Money

Knights of Templar Box

Alien Queen Bank

Cacodemon Bank

Green Mushroom Bank

Yellow Orange Mushroom Bank

Yellow Green Mushroom Bank

Mario Bank

R2D2 Bank

Better Looking R2D2 Bank

Predator Bank

Ctulhu Bank

Frankenstein Bank

Alien Big Chap Bank

Unmasked Predator Bank

Alien Warrior Bank

Burnt Stay Puft Marshmallow Man Bank

Glow in the Dark Alien Bank

Glow in the Dark Ctulhu Bank

Alien Egg and Facehugger Bank

Spock Bank

Glow in the Dark Slimer Bank

Regular Slimer Bank

---------------

I also would love to suggest these non-bank toys :D

Figuarts Super Mario

Figuarts Yoshi

Rement Pose Skeleton Tyrranosaurus Rex

Schleich Tyrannosaurus Rex

Schleich Gigantosaurus

Bandai Godzilla

Movie Monster EX King Ghidorah

Millennium Godzilla

Godzilla 90s Era

Godzilla 2014

------------------

I noticed he likes JOJO, a manga/anime that I also love! These following toys are beyond your $30 budget, BUT in case you feel like spending a little more to make your boyfriend happier, then these toys will do the trick :D

Medicos Jotaro

Medicos Dio

Medicos Josuke

There you go, I hope you find my research helpful and you can pick a few from them hehehe :D

u/Underclock · 1 pointr/tarantulas

I'm imagining something like this. Am I close?

u/Player-X · 1 pointr/fountainpens

I have a newtrent ultrasonic cleaner that I bought from Amazon for around $25, they are not terribly expensive, here's a link to a fairly decent ultrasonic cleaner, or you can probably ask a jewelry store to help you clean your fountain pen with their ultrasonic cleaner.

http://www.amazon.com/Ultrasonic-Jewelry-Eyeglass-Lens-Cleaner/dp/B003BG9Z8I/

u/ItsSoWonderful · 1 pointr/somethingimade
  • The music kit I bought came with a hole punch and paper, so you can get started right out the box. There are ones that are around 10 dollars cheaper but use plastic gears which I heard wear down easily. If you don't mind hand cranking it, you can just toss it in a woodbox and go from there.

  • Here's the motor and speed controller that I used in my build. You just need to hook up the motor and a power source to the speed control, and then find a way to mechanically turn the crank with the motor. I just used a hex coupling to attach a piece of stiff cardboard to the end of the motor shaft which turns the crank. It might be easier to just go with a motor-run music box instead, that way you just need to clip the wires and hook up to the speedcontrol (or just use as is if you dont need to adjust speed!)


  • The wheel was made from two film reels I found in a local garage sale with some nuts and a threaded rod, and it's held up by two wire coat hangers that I bended to fit.

  • The paper with the actual song on it needs to be hole punched for each note, this is a great site where you can fully program a piece to see how it would sound before actually punching the paper. It also lets you export the piece as a pdf with x's on the exact places to punch holes so the process is a lot cleaner.

    Other than that, its just woodwork to frame all the parts into one piece, where there are a ton of better resources than me on the subject. Keep in mind just settling on handcranking the box is loads of fun on its own.
    Feel free to pm me if have any more questions on it and good luck if you actually decide to go for it!
u/erock2112 · 1 pointr/woodworking

I'm not sure what it's called, it's just a little push-to-disconnect switch. It's the white thing toward the back in between the hinges. I bought this ring box and ripped out the electronics to use in my own box: https://www.amazon.com/gp/product/B01HDWZ8O0

u/eschatonik · 1 pointr/VapePorn

I think it's worth it if you have a few mods and like to keep them as clean as possible as often as possible. The thing I like best is that it cleans those really hard to reach grooves and threads that you'd otherwise need a toothbrush or something like that for.

I picked up this one, mostly becuase it has a heater, but in retrospect, I should have saved $30 and just used hot water to start with:

http://www.amazon.com/gp/product/B0006DOALG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

u/clothridge · 1 pointr/wedding

I bought this diamond cleaning pen on Amazon! It's great for getting around the prongs and underneath the diamond (mine is a french basket, so there are lots of areas where the diamond is exposed but too difficult to get to with anything else).

u/billgarmsarmy · 1 pointr/electronic_cigarette

ultrasonic cleaners are great for cleaning atties. okay for mixing juice. and not good at all for steeping.

i have this one and use it all the time. it's much bigger than the one you linked to (1.4L v. 16oz), but both appear to be otherwise similar.

u/darkfires · 1 pointr/electronic_cigarette

I use one of these, fill it with warm water, and put the bottles in for about 2-3 hours or however long you have time to press the 8 minute timer button.

The water progressively gets warmer as time goes on which helps. It fits three 30 mls, five 15 mls, or one 120 ml but it doesn't seem to work well with larger bottles.

Time in a dark space is still your best bet but I find this helps speed things along by a good bit.

u/StinkyLebinowitz · 1 pointr/Silverbugs

I bought this when I got into this and it did a pretty fair job of getting some shine instead of haze. And like you said, it's just bullion, delivered in a pretty package. :-)
https://www.amazon.com/gp/product/B000FIS5U4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

u/colonelk0rn · 1 pointr/DIY_eJuice

If you're interested, I'm willing to sell my UC that I no longer need, since the wife bought me a magnetic stirrer for my birthday. I'd be willing to sell it for $45 + shipping. Here's the link for the unit, even though they don't sell this model any more I did the only video review on the listing. And FWIW, Kendal makes all most of the UC's that Amazon sells, companies just rebadge them like the ones listed in other comments.

Edit: rewording

u/GreenBallasts · 1 pointr/optometry

Thanks for confirmation, already have https://www.amazon.com/gp/product/B003BG9Z8I/ but picked up a 2-pack of that cleaning solution you recommended.

Also it doesn't make a difference if I go lenses-up or lenses-down does it? I tend to have to have the lenses facing down since otherwise it's kind of hard to get them fully submerged.

u/Lewis312 · 1 pointr/jewelry

Good to know. To clarify, she currently uses these two products - should we stop using them? What if there's no solder joints, would your opinion change? Magnasonic Cleaner & Jewelry Concentrate cleaner

u/Asceric21 · 0 pointsr/magicTCG

For that number of cards, I'd actually use something like this, with cards in penny sleeves (3-4 cards can fit in a single penny sleeves, to save on cost). You may consider folding and taping the opening of the penny sleeve so cards so slip out, but I think this would be the most cost effective way to do things. Plus, you could print shipping labels to put directly on the card storage box, while also taping it closed.

While this won't protect you from heavy weather, I don't think I'd mind receiving a large bulk of cards like this.

The other option, that I just remembered CardKingdom uses, are hinged hard plastic card cases similar to these. This plus a bubble mailer is what I've gotten from them on larger orders. And I think if the majority of my cards were $1-$2 rares, but I had a lot of them, I'd like them in this.