Best job site & security lighting according to redditors

We found 262 Reddit comments discussing the best job site & security lighting. We ranked the 102 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Subcategories:

Portable work lights

Top Reddit comments about Job Site & Security Lighting:

u/sullmeister · 13 pointsr/weddingplanning

Yes! This was a total budget saver! Those photobooth rentals are crazy expensive. We used a simple PVC pipe frame like this one. Now, thankfully we were very lucky to have an amateur photographer friend with a tripod (that we put our iPad mini on) and 4 clip lights like these. We used thick cheap curtains around 3.5/4 sides. We then used a fun (but also cheap!) red ruffle curtain for the backdrop. I DIYed the floating hearts using construction paper, a heart-shaped hole punch (thank you 40% coupon at Michael's), and fishing line. Here's a good tutorial. We also put up one line of string lights to give it a fun twinkle. Lots of plugs, so be sure you have an extension cord! A friend had some photobooth props that we could borrow, but really, you can find those for super cheap if you need to. In terms of actually taking the pictures, we used the timer effect on the iPad camera to delay the shot a few seconds, and then I just posted all the pics to facebook later. Our guests had a lot of fun with it!

u/joelav · 12 pointsr/woodworking

Personally I find lasers wildly inaccurate. Which is why they are often found on the lowest end machines and omitted from the better ones (like this Dewalt). The exception being the festool kapex, but that's no ordinary laser.

This works great though. Probably the best system for lining up cuts.

u/InsanityWolfie · 10 pointsr/starterpacks

Tryibg to fix shit with inadequate lighting is a real source of frustration. Get him one of these for christmas or something.

https://www.amazon.com/Woods-Clamp-Aluminum-Reflector-Listed/dp/B000HHQ94C?ref_=fsclp_pl_dp_5

https://www.amazon.com/PowerSmith-PWL2140TS-Dual-Head-Housing-Telescoping/dp/B010IFS49A?ref_=fsclp_pl_dp_1


A high powered headlamp is also a must, even with both of the other 2.

u/-BroncosForever- · 10 pointsr/OSHA

Haha yeah no problem. I believe you can also attach a duster to the end of most of them as well.

This is the one I have used

Looks like the easiest type to use.

u/Grenzer17 · 9 pointsr/MTB

Personally, I use this ( https://www.amazon.com/dp/B015E6M23C/ref=cm_sw_r_cp_awdb_t1_cuOCAb6Y51VGP). It's not intended for mountain biking, but you can securely attach it to bars via bunje cords. It's extremely bright, casts a huge angle, and illuminates 30-50 feet ahead. I've been using it for group rides with my buddies, and it's powerful enough that if we stay close to each other it's the only light source we need. Certainly not the most practical solution though.

u/ParadoxicalJinx · 9 pointsr/HomeImprovement

Ahh yes, the intoxicated painter. I had a guy who I knew was a little bit of a problem, but it only seems to make a difference on his speed. But one day he came in late, apologized, whatever, went to work... later he took a sip from his coffee and ended up spitting out all he had in his mouth and flinging half of his coffee on the rough sawn fire place mantle, wall and floor. He was a fucking mess that day. At the end of the day, he nudged the halongen work lamp over so he could (presumably wash his hands) get by and faced it towards the cabinet. It burned/melted the veneer. I resolved the issues with the client, but fuck I ever hire a person that can't control themselves around their drug of choice. Speaking of, I also had a guy get high at lunch once, (yes, high noon) and I didn't realize he was high until almost 2pm and he was still in the same bedroom trying to mud the walls.

TL;DR: Do NOT give a tradesman beer (or any drug) until the end of the week, the end of the day or better yet, at the end of a project. No good will come of it.

u/guitbit · 8 pointsr/Welding

I own 3 of these. They are very handy for this sort of thing. And at $10 I can afford to burn them up on occasion.

u/vivi4nn · 5 pointsr/succulents

For 6 small pots, maybe a clamp light set up would work for you. Something like this, with this kind of bulb. The key is to get about 2,000 lumens per sqft if you want really tight growth and sunstress colors, though you can certainly go lower.

If you think you'll need more room, then I highly recommend a shelf set up. This is mine, it's just an ikea stand with a bunch of shop lights attached to each shelf.

The truth is you don't need to buy lights specifically advertised as "grow lights" or "full spectrum" lights. Just check that it's around 5,000k color temperature, and puts out about 2,000 lumens. This info should be on the packaging. Good luck!!

u/Solid__Snail · 5 pointsr/cinematography

This looks like to be a standard worklight

(type: https://www.amazon.com/Designers-Edge-L20-Portable-Handheld/dp/B000IJRMWM/ref=sr_1_7?ie=UTF8&qid=1482629869&sr=8-7&keywords=work+light)

with a cardboard makeshift barndoors and a diffusion outside on the cardboard. I can't see to see any ctb gels, so I take it that the in camera white balance has been adjusted to around, say 2700k? Or adjusted in grade.

This is a really cheap way to create light. Lamp cost around 20$, cardboard is free-ish? Diffusion gel can also be acquired for next to nothing.

I take it that the light is supposed to be moonlight?
For more "nuance" to the scene I would probably have added warm tungsten practicals to complement the cold moonlight. This is of course depending on the story. I would probably also add a bit of green to the moonlight, perhaps cyan or steel blue? This is personal preference of course.


I would maybe also consider to make the exterior light a sodium street lamp for more realism (also depending on the story and genre)

Great that you take your time sharing your setup with a video. Next time I would probably add some more details to your build, like budget, what kind of gels, why you did as you did, and what the story is.

u/mayanaut · 5 pointsr/photography

Get yourself some cheap work lights, like this:
http://www.amazon.com/Woods-8-5-Inch-Reflector-150-Watt-6-Foot/dp/B000HHQ94C/ref=sr_1_6?ie=UTF8&qid=1453582618&sr=8-6&keywords=work+light
Not only are they cheap, they have their own clamp so that you can attach them to chairs, lamps, doors, whatever you have available. If you can still get incandescent bulbs where you live, those will be the most uniform in color temperature. CFLs vary quite a bit, even within the same lot / package. About 3 lights will get you set up for most things you want to do.
Then get yourself some black mat board or foamcore, at least the size of an entire side of the box. Get several pieces of that, and you can selectively block your light source to shape the light however you want, up to the size of that particular face. Some small spring clamps can be used to help hold the board to the box, or upright on a table. You can even use cardboard if you're really on a shoestring budget, and it will work just as well with natural light as it will with artificial lights.
An alternative use for the box would be to put a light inside it and mount it like you would a softbox and shoot portraits with it.
Just some suggestions.
ETA: If you use incandescent bulbs, especially if you go up to 100-150W, be careful with how close you get them to the fabric of the light tent, because it can melt or catch fire!

u/-wolfinator- · 5 pointsr/Aquariums

What kind of look are you going for?

You could probably perch one of those cone-shaped aluminum work lights on top, but it will have an industrial look.

Something like this, but used without the clamp.

http://www.amazon.com/gp/aw/d/B001KDVY42/ref=mp_s_a_1_6?qid=1463959589&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=clamp+light+10+inch&dpPl=1&dpID=41hFYMDpfcL&ref=plSrch

http://www.amazon.com/gp/aw/d/B00B7PJHU6/ref=mp_s_a_1_4?qid=1463959589&sr=8-4&pi=AC_SX236_SY340_QL65&keywords=clamp+light+10+inch&dpPl=1&dpID=51ivgMwycLL&ref=plSrch

I'm not sure how that would work long-term with moisture, and you'd have to set it up in a way that it wouldn't fall in.

Another option might be a clip-on desk light.

Or this: http://www.amazon.com/gp/aw/d/B00LIL7YPE/ref=mp_s_a_1_3?qid=1463959903&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=finnex+fugeray

The problem is the cylindrical shape. If the clamp doesn't go on well, you might have to improvise.


u/doubleplusunsigned · 4 pointsr/metalworking

First of all, thanks for sharing the video. I think metal casting is really interesting, and it's great to see how different people approach it.

> It's ok to be brutal.

Alright -

I really hate the music you used.

I'm also not a big fan of videos where that show the entire process at 10x playback (or whatever speed) - to me that indicates that you're showing too much. When I see videos like this, I click through around the timeline to find the interesting parts. Show the critical parts at regular speed and cut out the extra bits. Tell me (or show me) why something is a critical step.

Increase your lighting for better video. Do you have some work lights? Get two of them as close as possible to what you're working on at different angles and try filming like that (the closer you have a light source to a subject, the more even it appears. Far away lights appear as "points"). Set the white balance on your camera to account for the color temperature of the lights. Or if you have any kind of desk lamp, try pointing it at whatever you're filming. You'll have to experiment with what looks best with what you've got.

During the wax carving section, a huge portion of the frame felt wasted. You could have gotten much tighter on the actual carving, which would have drawn me in more than looking at a 90% static shot. Again, slowing down here and showing why you make certain carving decisions would have been more interesting. For instance, why did you carve out the middle then re-fill it? I had no idea what was going on there.

I felt bad for the clippers you used to get the wax out of the can. They look like flush cut electronics clippers, which usually say something like "For Copper Only". This indicates that using them on harder metal (like a can) will damage the cutting surface. But they're your tools.

From a PPE perspective, I would strongly consider wearing leather boots while pouring molten metal. But I can be clumsy at inopportune times and I like my toes.

u/hellojerb · 4 pointsr/ecommerce

$20 for a stack of cut acrylic? You've got to do a much better job at explaining the value proposition here. Especially when the average person is not going to have any idea what it is you're selling.

Also - pictures, pictures, pictures. The average person will spend 5 seconds on your website tops, read 1 sentence (the heading), look at the pics, and leave. Your pictures look like they were taken in your backyard in the dark. Go buy:

u/GummyTumor · 4 pointsr/halloween

I know you said you want a regular light bulb size, but I really recommend you get the ones that are a long tube instead. They're much stronger than any you can find in a bulb style and they're not that expensive, I've seen them at Wal-mart for under $20 for a 24" with all parts necessary.

But, If you really need a bulb just make sure you don't get the incandescent style, those are garbage. You literally have to place them right next to whatever you want to glow and they've always burnt out on me after a few days with minimal use. CFL (the twisty ones) bulbs are ok, but you'll need several and maybe some reflectors to really give them range. A blue CFL bulb will also cause fluorescent things to glow, and they're much brighter and have a longer range than the black light CFLs, but then everything will be blue. Personally, I think it looks pretty cool, but it might not serve your purposes. There's also LED blacklight bulbs now, I don't have much experience with those, though.

u/JelliedBiscuit · 3 pointsr/succulents

[The original 2' T5 fixture] (https://www.amazon.com/dp/B0006856EQ/ref=cm_sw_r_cp_api_1RrFAbKNAEJ2M) I bought. I still use the green frame but it took some extra work to get it to support the weight of my new light.

My current 8 bulb light Not cheap but zero regrets. It's amazing.

Two pack clamp fixture - better deal than if you buy them individually.

Four pack of red/blue LED bulbs

u/ZeosPantera · 3 pointsr/DIY

I do all sorts of audio recommendations on /r/zeos and the only other speakers I recommend cheaper than these are the Dayton B652's which are larger than these but only $50. You can also grab the Lepai 2020 amp (which is also larger) for only $20 and since it is SO cheap and has smaller capacitors most normal battery packs will power it. Like the this one

So that is under $100 for all the main components you just have to work out the cutting board bits to accommodate it all.

u/ChefChopNSlice · 3 pointsr/HotPeppers

Putting them outside right away can be bad for a few reasons. They’re delicate and sensitive to intense light, changes in temperature, gusting wind, and predators. They do not have the strength or root systems in place yet to recover from any environmental stress. Unless you get very lucky with weather and the cosmos are aligned juuuust right, you might be in for a rough time. Getting leggy is definitely a possibility with them being inside and not having a grow light, but you can always bury the stems pretty deeply when you transplant them and are ready to put them out. Your window isnt ideal, but it’s probably still a better bet at this time. You can also find a pretty cheap grow light option if you have $ 15 to spare. Here’s an entry level fixture for a nice CFL grow bulb. It’s $10 on amazon prime with free shipping. You can also find these at the hardware store, or a discount store like big lots (I got em for 5-8$ there)

https://www.amazon.com/Woods-0169-8-5-Inch-Reflector-150-Watt/dp/B009ONXWC2/ref=sr_1_3?ie=UTF8&qid=1523460361&sr=8-3&keywords=Clip+shop+light&dpID=41EfPZ5XphL&preST=_SY300_QL70_&dpSrc=srch

Simple CFL grow bulbs in the 6500K “daylight” spectrum. 4 pack of bulbs for $15. You can look around for cheaper ones, but just try to find the highest wattage equivalent you can, at 6500K spectrum.

https://www.amazon.com/Philips-433557-100-watt-Equivalent-Bright/dp/B00M6SR1JM/ref=sr_1_4?s=hi&ie=UTF8&qid=1523460444&sr=1-4&keywords=CFL+6500k&dpID=41aqLa5KpiL&preST=_SX342_QL70_&dpSrc=srch

u/haleyb33 · 3 pointsr/succulents

I got these light bulbs:Philips 433557 23W 100-watt T2 Twister 6500K CFL Light Bulb, 4-Pack https://www.amazon.com/dp/B00M6SR1JM/ref=cm_sw_r_cp_apip_DzUQEygjjF5D6

And these clamp lights: Woods 0151 150-Watt Clamp Light with 8.5-Inch Reflector and 18/2 SPT 6-Foot-Cord https://www.amazon.com/dp/B000HHQ94C/ref=cm_sw_r_cp_apip_zblHwmbXUOgSL

I scoured the interwebs for this info and I'm hoping they give my plants some better lighting! I've got them clamped to some heavy square pots that are laying on their sides. It's a tiered shelf but the tier right above my plants would be too close to clamp the lights to and I think they'd get burnt.

u/FizixPhun · 3 pointsr/succulents

So the light intensity, which is given in lumens, is really the important thing. Lumens scale with power though. I just mean don't get the tiny light bulbs. I have used this one. A reflector lamp isn't the most aesthetically pleasing but it is the cheapest way to get the job done. These can give you a lot of intensity right under the bubl but because the bulb is small the really good area is not too large. The advantage of the T5 bulb is that it is that they distribute the light over a longer distance. giving weaker light but over a larger area which means you just need to have the light on longer in a given day. Also, remember that intensity falls off with distance squared so you get the biggest bang for your buck by putting the succulents close to the light.

u/piercedtiger · 3 pointsr/Tools

I use this.

I love it! It outshines all of my AC powered lights, short of the halogen work lights. I can clip it to a belt and light my path, hang it from a pipe or nail, or stand it up (a 4-6AH battery works better when angling the head due to the weight). I've bought one for my mother to use (she hung it off the lamp post on the driveway to light up the end where she needed to snow blow), and plan on one for my father in law. Wife grabs it every time she needs light to unclog the coffee maker, pull a splinter, reset a breaker, or take a dog out at night. It's one of my most-used DeWalt tools!

u/Ron_Fuckin_Swanson · 3 pointsr/houseplants

Not OP...but I have a bunch of plant grow lights for my houseplants and can answer

If you go to Amazon and search SANSI full spectrum grow lights, you can find an assortment of sizes and wattages. I have a couple in the 30 watt range and they are amazing lights

Then you simply have to get a medium to large clamp on shop light and aim the lamp wherever you want the light to go.

These sansi bulbs are also pretty light weight. I currently have one just hanging from the ceiling over my palm so it gets as much light as it needs to stay big and healthy. And its bright enough so that plants in the room also get some ambient light.

Ive also had really good luck with this clamp on light. I chose this one because its bright, its white full spectrum light, and it doesn't come with a built in timer.

I plug my grow lights into WIFI outlet plugs so I can custom set the schedule depending on the day of the week.

Other tips. The pink style grow lights tend to have good results with young growing plants. You can get the clamp on LED versions all over Amazon. But I have had better over all luck with full spectrum white LED lamps. Plus the pink light just doesn't feel as nice as full spectrum white.

In the deep winter, those full spectrum lamps can really give you the feeling of sunlight...which helps with happiness

u/Imaybeusethisaccount · 3 pointsr/streetwear

Dope Pickups.

I participate in video production, some simple tips that can and will approve your video quality.

  • I'm unsure what type of camera you are using, but most video cameras have a mic input. A lav mic would make audio never a issue again. You can pick them up super cheap over at amazon LINK

  • Lighting is kinda a issue. Lighting is super cheap too. Run down to that hardware store and pickup some work lights. 20 dollars for 2. LINK. These will make the video quality look 10 time better. Here is my fucking amazing artwork to show you how lighting should be. One behind you on your wall and one behind your camera pointing at you. Super Dope Diagram

    Anything else Im more than happy to help you
u/LubricatorHex · 2 pointsr/turning

Or just buy one that already has a magnetic base.

u/24nm · 2 pointsr/flashlight

This is going to be a different answer, but how about the Astro Pneumatics 40SL?

https://www.amazon.com/Astro-40SL-Lumen-Rechargeable-Light/dp/B018R0XQPA

I bought it almost 2 years ago after seeing EricTheCarGuys video review on it. It's the best work light I've ever owned, and it sees more use and abuse on worksites than most of my other lights. If you do any wiring at all, the flat and even lighting from the COB LED doesn't cast harsh shadows, making things easier to see. USB rechargeable. My only complaint is that the magnet on the base is too strong and it will scratch surfaces if you're not careful.

u/reticulatedspline · 2 pointsr/hydro

Hmm... the container is a plastic storage box I had lying around at home which I spraypainted black. The container was less than $5 if I recall correctly. Black spraypaint (make sure to get one which is designed to adhere to plastic) was about $5.

Air pump is this guy which was about $15.

Light is one of these bulbs, housed in one of these reflectors. $18 and $11 respectively.

Then the air stone, clay pebbles, net pots, air tubing, etc were all leftovers I had lying around.

All told maybe $50?

u/IKanSpl · 2 pointsr/amateurradio

Amazon has a bunch of portable battery packs that put out 12 volts natively. They are cheap enough that it almost isn't worth building your own.


https://www.amazon.com/HitLights-Rechargeable-Lithium-Battery-Strip/dp/B007RQW5WG

u/AAA515 · 2 pointsr/Tools

>I still suck at holding a flashlight for anyone else but me. Thanks Pops!

The flashbacks get to him and he starts shaking.

Don't worry we got these things called LEDs and here ya go plug in that battery from your drill and you can't trip on any cords! And dont worry about shaking, its an area light, no small cone of useful light surrounded by dim glow like a maglight

u/dcoolidge · 2 pointsr/diyaudio

Yep. I used a 12v Lithium Battery. Works pretty good. The power lasts for hours. Longer than my phone (8 month old s3)...

u/Gloinson · 2 pointsr/photography

> 50mm (f/1.8) lens and the 18-135mm (f3.5-5.6)

Just try both. You'll end up using smaller apertures anyway for some of the close-ups as 1.8 has an extremely thin DOF and sometimes you'll want more than only the eyes sharp, nice blur of the lens or not.

As for the lighting, if you don't have sufficient lighting or the baby just doesn't want to adjust to your days lighting-schedule: I already suggested in another comment work-lights like these. Poor mans lighting equipment, adjustable by umbrellas and cloth :)

u/TigerBeetle · 2 pointsr/hydro

Both work great. Florescents are cheap upfront. LEDs cost more, but last longer and use a little less electricity for the same output. It is really just a decision of if you want to spend your money now or later.

Another consideration is that led grow lights tend to be red/blue. It makes them very efficient grow lights, but might be off putting if it is in a living space.

Whatever you get, a light stand would allow you to move it easily.

The cheapest/easiest thing that might work would be to buy A clamp light and a High Power CFL

Ignore this next bit. ~~But if you really want it to flourish, I'd be looking at a 2ft 4 bulb T5 lamp or a ~100W led array plus a light stand.
Beware of advertised wattages on LEDs(especially cheaper models). Most manufacturers advertise the maximum power and then actually drive the leds with much less.~~

Edit: No matter what you get, don't forget an outlet timer. You are going to want to automate turning the light on/off. Also all links above are just examples they may not be the best thing/best deal.

u/spingo · 2 pointsr/photography

I shot this
http://www.flickr.com/photos/jamesjbarnett/5154877335/in/set-72157626544818300

with 4-5 cheapo clipon work lights using daylight-color compact fluorescent bulbs, probably 100w equivalents.

http://www.amazon.com/Designers-Edge-Incandescent-Clamp-6-Foot/dp/B00076Q0FQ/ref=sr_1_1?s=hi&ie=UTF8&qid=1310523061&sr=1-1

http://www.amazon.com/Watt-Energy-Smart-CFL-Replacement/dp/B000UYF80S/ref=sr_1_2?s=hi&ie=UTF8&qid=1310523104&sr=1-2

They were clipped on the top shelf of a bookcase, with a dollar-store white shower curtain liner hung in front of 'em for diffusion.

Maybe $50 total?

(Background was 3-4 yards of primed canvas from the fabric store, painted on the unprimed side with black house paint. $20-25?)

u/atra_phi · 2 pointsr/homegym

That's a sweet set up! Now invite some friends over to work out! As far as lighting, I use a light similar to this when I workout at night in my garage.

u/mojoman913 · 2 pointsr/ikeahacks

They're similar to this (https://www.amazon.com/Woods-8-5-Inch-Reflector-150-Watt-6-Foot/dp/B000HHQ94C/ref=sr_1_sc_2?ie=UTF8&qid=1474126402&sr=8-2-spell&keywords=aluminum+reflector+lght). I have four of them with identical bulbs. I also have a light stand that I set up in front of the opening. I bounce that light off a piece of white poster board.

u/Nam-Ereh-Won · 2 pointsr/Random_Acts_Of_Amazon

Something like this would be great for that! Might need to do something to diffuse the light a bit, a coffee filter would work nicely!

u/hell_ianthus · 2 pointsr/succulents

I was in the same position few weeks ago till I read this post


Son bought me 3 of these lamps and my plants couldn't be happier.


Another post which is very helpful to get a grasp of lighting.


Good luck and Happy New Year!

u/arborealchick12 · 2 pointsr/houseplants

Sansi 36 watt on a Woods chicken brooder heat lamp fixture https://imgur.com/a/nUVBgnC

Woods 0324 18/2 Gauge Brooder and 150-Watt Heat Lamp with Wire Grill and Clamp, 6-Foot, Black https://www.amazon.com/dp/B000KKHRXI/ref=cm_sw_r_cp_apa_i_GNAEDbEBYEA61

Edit, another one. http://imgur.com/a/77h0U6E

u/tacotacoman1 · 2 pointsr/microgrowery

Awesome. Ever considered adding some UV or IR spectrum? That is only downside I see from the samsung diodes, but is easily remedied if desired.

I have noticed some increased trichrome production when adding UV but uncertain if its from the UV or some other factors.

My current plans are to remove all burples, replace with quantum boards then add something as simple as:
https://www.amazon.com/s/ref=nb_sb_noss_2?url=search-alias%3Daps&field-keywords=uvb+light

and

https://www.amazon.com/8-5-Inch-Reflector-150-Watt-Dawson-Bros/dp/B071WJPWL2/ref=sr_1_3?ie=UTF8&qid=1536520637&sr=8-3&keywords=light+clamp

To get a bit of UV on the grow.

Edit: "UVB: UVB supplementation is highly desirable in this approach because it can increase THC levels by as much as 30%. SO UVB should be supplemented for the last 5 weeks of flower minimum."

https://californialightworks.com/light-spectrum-and-plant-growth/

u/downhillcarver · 2 pointsr/MLPLounge

I'm no expert by any means, this is only a hobby, but I'll give it a shot. Also keep in mind that I'm a film photographer, so some of my knowledge may be irrelevant due to you using digital. You've already got it easier than me thanks to the digital camera.

I put a glossary at the end if any terms are too photography-y for ya.

Your biggest difficulty will most likely be finding a space appropriate for the shot. Large open floor space, some way to whitewash the floor if that's what you're going for. You also will need a high ceiling, the standard 9ft ceilings won't be nearly high enough to obtain that ratio of subject to empty space, not sure if I stated that clearly.

Another of your biggest difficulties will be rigging up your camera mount and reaching said camera once it's mounted. I honestly can't think of any easy setup for you to use. If I think of something I'll let you know.

Now on to lighting. It's a very soft even light, so you cannot have any lights shining directly on the subjects or you're going to get "hotspots" and hard shadows. I would suggest hanging a white sheet off to the left of the shot and shining several bright lights onto that. I would say to just grab the cheapest work light you can find at your local hardware store, but I'm afraid that may be too yellow of a light. If you're going for the "pure" look of white on white on white, the yellow light will throw that off. As such, I'm not sure what to suggest for a light source, just make sure it's bright and you diffuse it by either bouncing the light off a white sheet, or shining it through a white sheet.

Now on to the camera itself, I don't know what kinda camera you have, but this shouldn't be a terribly difficult shot to obtain. It's well lit, there's no motion, and the subjects are at the same focal distance. No matter what camera you're using, make sure the flash is turned off, or all your hard work setting up the soft even lighting will be for nothing.

If you have a generic digital camera, simply take several shots flipping through the different preset modes, I expect portrait will get you the best results. Once you've found the mode you think is best, you may attempt to tweak settings from there to obtain the results you want, but many of these generic cameras either don't have many settings to play with, or they are not easy to access.

If you've got a DSLR (Digital Single Lense Reflex)(they generally look about like this with interchangeable lenses) then you've got the potential to get a much better shot if you've got the time to mess with it. Many DSLRs also have preset modes, you may be able to use one of those as a baseline to start from like before.

Because it's well lit and no motion, you shouldn't need to do anything fancy. If you don't have presets or they aren't doing the trick I'd set the ISO for about 400 and the shutter speed for about 1/32, then adjust the aperture until the picture has the brightness you want, bring it into focus and take the shot. Then tweak it from there to your pleasing.

Very brief summary of photography terms and how they'll effect/help you. If you have a DSLR, you can adjust all these settings, if it's a generic digital camera then I don't know how much control you'll have over these things. I glossed over a lot of stuff here:

  • ISO: this term is a carry over from film. It's basically how quickly the film is exposed when subjected to light. Lower ISO needs more light exposure, higher ISO needs very little. As such, your shutter speed should be adjusted to your ISO, low ISO = slow shutter speed, high ISO = fast shutter speed. Your digital camera still has an ISO setting which you can adjust on the fly.
    400 is a good middle ground for most scenarios. I've personally found that 800 will come out grainy, but that's with film, I dunno if that applies to digital. 200 is good for well-lit, still subjects, so you may want to try it for this photo.
  • Shutter Speed: How quickly your shutter opens and closes. This is measured in fractions of a second, the middle ground is 1/32, usually just called 32. You'll adjust this depending on lighting and if the subject is moving. If you're shooting a sports game on a sunny day, you'll use a faster shutter like 64 or 128 because there's plenty of light, and because of the motion a slower shutter would cause the photo to blur any motion.
  • Aperture: this determines how much light is let into the camera, the aperture is measured by f-stops such as f/1.8 or f/22. Aperture is tied to your ISO and shutter speed. If it's a bright day, choose a higher f-stop, dark night = lower aperture. If you're shooting a fast shutter speed with a low ISO, you'll need to choose a lower aperture to let more light in quickly or else your film will be underexposed. In your situation, simply adjust the aperture till the image looks appropriately bright, then adjust it if your photo comes out light or dark.
    Your aperture will also affect your focal length. Higher f-stop = longer focal length, lower f-stop = shorter focal length. I can elaborate on this later, but it shouldn't effect you on this shot.
  • Focus: I know I don't have to define this, but here's a tip for getting a good sharp focus. Set your aperture as low as it goes, usually f/1.8, focus your shot, then set your aperture to where you want it for the shot. This has to do with how the aperture effects your focal length, which I can elaborate on later.

    I know I went over a lot of information very quickly and I glossed over a lot of stuff. If you have any questions at all, please feel free to ask!
u/fallenumbrella · 2 pointsr/succulents

Philips 23 watt 6500k CFL bulbs (you can also pick these up at your local home improvement store): https://www.amazon.com/Philips-433557-100-watt-Equivalent-Bright/dp/B00M6SR1JM/ref=sr_1_3?keywords=philips+23+watt+cfl&qid=1550422990&s=gateway&sr=8-3

And don't forget clamp lamps: https://www.amazon.com/Woods-0169-169-Clamp-Light/dp/B009ONXWC2/ref=sr_1_2_sspa?keywords=clamp+lamps&qid=1550423123&s=hi&sr=1-2-spons&psc=1

​

Depending on how much space you have for a decent setup, you might want to consider T5 light bulbs and fixtures if you want more even distribution of light. I find that I have to put all my succulents together under or around the the lamp in order to get good growth and stress colors out of them. As long as the light bulbs are on or around 6500K (cool white light) then your plants will get the right amount of light that they would get if they had some sunlight.

u/nogami · 2 pointsr/Hue

These things are awesome for bulbs in hard to reach places. Can easily tackle lights in our high ceilings with it.

Designer's Edge E3001 Light Bulb Changer Kit with 11-Foot Telescopic Pole and 5 Adapters https://www.amazon.ca/dp/B008KWRCIS/ref=cm_sw_r_cp_api_lfUNybK2AHWCG

u/caesartheday007 · 2 pointsr/halloween

I got 12v battery packs. Hers the link:

HitLights 12V DC / 5V DC (USB) Rechargeable Lithium-Ion Battery Pack - 3500 mAh, Includes Charger - for LED Light Strips, Phones, and More https://www.amazon.com/dp/B007RQW5WG/ref=cm_sw_r_cp_api_8XmWBbR4ZEZE9

They run a long time - way more than trick or treating...in the off season I use them as my mobile phone chargers when I travel. They will juice up an iPhone to full at least 4 times.

u/swoofswoofles · 2 pointsr/Filmmakers

In my personal opinion I would try and go more towards tungsten lighting, really cheap, good color, and very reliable. You need to shoot around what you have, so that means if you're going to do anything at night you can't show big spaces. Try some china balls and clip lights. Then get a bunch of light bulbs, dimmers, and diffusion. The diffusion I listed in sort of middle of the road, not too heavy, not too light. You could do great night interior work with just this. Night exterior might be possible, but you have to plan a lot around existing lighting.

​

https://www.homedepot.com/p/Lumabase-10-in-Round-Paper-Lanterns-5-Count-78005/204191099?cm_mmc=Shopping%7CG%7CDD%7CD59%7C59-6_HOME+D%C3%89COR%7CNA%7CNA%7c71700000032287291%7c58700003837160922%7c92700036675473299%7cpla-514547808605-51080780382&gclid=EAIaIQobChMI7Yr03I7x3QIVAcZkCh3A8gTWEAQYASABEgIexPD_BwE&gclsrc=aw.ds&dclid=CO3d7N6O8d0CFU3FZAodpXAGQg

​

https://www.amazon.com/8-5-Inch-Reflector-150-Watt-Dawson-Bros/dp/B071WJPWL2/ref=asc_df_B071WJPWL2/?tag=hyprod-20&linkCode=df0&hvadid=198068910902&hvpos=1o1&hvnetw=g&hvrand=10150620353935443755&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031204&hvtargid=pla-352850301737&psc=1

​

https://www.amazon.com/Lutron-Credenza-Halogen-Incandescent-TT-300H-WH/dp/B0000BYEF6/ref=asc_df_B0000BYEF6/?tag=hyprod-20&linkCode=df0&hvadid=167140365824&hvpos=1o9&hvnetw=g&hvrand=8666904966532857364&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031204&hvtargid=pla-274342005344&psc=1

​

https://www.filmandvideolighting.com/cotech-250-half-white-diffusion-gel-filter-sheet.html?_vsrefdom=adwords&gclid=EAIaIQobChMIwKT9k4_x3QIVD6rsCh0Slw9QEAQYBSABEgL1L_D_BwE

​

u/citricacidx · 2 pointsr/funkopop

That's exactly what I did. The poster board is taped to the top of the back, and naturally falls a that curve. I'm using an LED strip I got off Amazon, cut into 3 sections (both side flaps and the top) and soldered them together with wire. It's a little overly bright for my purpose and has the white/blue kind of tint to it. But it works very well and runs off a rechargeable battery pack I also picked up from Amazon.

u/shrike1978 · 2 pointsr/snakes

In a glass tank, you're probably going to want/need to do a little more work to really get things in good shape. Glass is an awful insulator, so most of the ambient heat is going to just go right out of the glass. I'd recommend covering three sides of the tank with foam insulation. That will help contain the heat and keep you from losing as much. Covering most of the lid with something will help as well, which it sounds like you're already doing. I'd cover all but a quarter or so of the top with the foil and use the opening on the warm side for your CHE placement.

Since you have a UTH, the major goal with the CHE is going to be raising ambient temps, and not so much creating a hotspot. You don't necessarily need a dome for this. A dome is going to concentrate the heat on a spot. That's not necessarily a bad thing, but unnecessary in your use case, and will make thermostat probe placement need to be a little more precise and mean that the surface temp directly is going to be a bit higher for the same ambient increase. Neither of those are showstoppers though. What is absolutely necessary is the use of a ceramic socket. A plastic socket will melt. I have my kingsnake's CHE in this socket. The thermostat probe needs to be hanging under the CHE. Aim to get the ambient on the cool end up to at least 78F while making sure it doesn't create a surface temp of more than 92F on the warm end (assuming ball python).

As for placement, put it on the warm end, and you can absolutely place it on the screen directly, but it does make it more annoying to get in and out of in a top opening, so I have mine mounted on a lamp stand for convenience.

u/chris_hinshaw · 2 pointsr/raspberry_pi

I was working on something very similar yesterday. Yes you will need to power the servo's separately. I was able to get everything from Amazon yesterday. You will need a power supply. I bought a 12V power supply from amazon.

Battery Pack
http://www.amazon.com/gp/product/B007RQW5WG/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1

You will also need probably two dc-dc step down converters
http://www.amazon.com/gp/product/B00CXKBJI2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

You can split these with a simple adapter and connect both of your step down converters
http://www.amazon.com/dp/B00NNL1YA8/ref=twister_B00NNL1XIG

You will wire the output from one converter to the one side of your breadboard and the other to the otherside. You probably want to separate the power from the pi and your servo's so that you don't get a voltage drop which could damage your pi. There are cheaper solutions to this like using a simple voltage regulator but you would give up 7v in heat. So it is recommended to get an efficient dc converter.

My 2cents

u/phidus · 2 pointsr/AskEngineers

You will almost certainly need a generator or a running car as /u/Laymanism mentioned. A dual halogen worklight will draw about 1000 watts [1]. A car battery will hold about 18 AH at 12 V [2]. Even with a perfect inverter you would only get about 12 minutes power. You could hook up a bunch of batteries in parallel, but I would recommend a generator and a long extension cord.

u/heyheyheygoodbye · 2 pointsr/DarkSouls2

> I made a kick-ass lighting Wretch

Telescopic Changing Pole Wiki

Infusion Wiki

u/MXloop · 2 pointsr/aviationmaintenance

This would be an alternative , our Cornwell Tools guy was peddling this around.

u/MeIsMyName · 2 pointsr/AutoDetailing

This is what I've been using. It's tall enough to get over most cars, but it is a 1000w light, so it gets toasty pretty fast. Looks like the same company makes LED single lights for $30, so I'm considering buying a couple of those and mounting them on the stand that I already have.

u/RavensAlehouse · 2 pointsr/Random_Acts_Of_Amazon

Quite a few actually aren't too bad. Yeah, you can tell they were taken with a phone or low resolution camera, but they do give plenty of detail.

Free route to improve photos: North facing light. Use light from the window/s facing North! It's the most diffused (in this hemisphere lol) and therefore best natural light that won't make things glow or end up as grainy (which outside of being a phone camera, is a lighting issue)... also wiping off the camera part with a soft cloth before shooting. Fingerprints, dust, stuff gets on the surface and can make things hazy and not focus right

Cheapest route: this will help with light diffusion. You will need two lights, one at each side, and cheap little desk lamps like this will do well and allow you to move the light angel as you need. These work well too, you know, whichever is cheaper and easier to get. I know places like Home Depot have the clamp lights, but I'm not sure the price, here I think the small ones are $8 which isn't bad.

Next cheapest: phone upgrade or point and shoot camera! Nothing fancy, not sure how you'd get for close ups because I haven't used a point and shoot in years. I know there's silly attachments for phones that you can add telephoto lenses to or probably macro if they have those now. I've only seen iphone stuff so far though, not sure if it'll work with others

Most expensive route: DSLR + macro lens (or filters, because filters are cheaper lol)

u/everythingwastaken2 · 2 pointsr/Aquariums

This is a pretty good primer. It seems daunting, but it's actually pretty simple once you dive in. You can do this on any scale, from a half-gallon nano tank to as big as you can imagine. If you choose to try live plants, the cheapest lighting there is consists of a clamp light or clip-on desk lamp with a 23 watt 6500k compact fluorescent bulb in it.

u/luciusism · 2 pointsr/ultimate

You could purchase/rent portable floodlights (something like this), but that would be expensive (not including generator) What we used to do is find a field that already has artificial light and then play on it's adjacent field. The field wasn't as nice, or as big, but there's usually enough spillover light to make playing feasible. Otherwise, find a local school and rent their gym for indoor. good luck

u/generic19name · 2 pointsr/SCREENPRINTING

Woods 500 Watt Portable Work Light, Yellow https://www.amazon.com/dp/B000IJRMWM/ref=cm_sw_r_cp_api_i_O.POCbK4Z7APD that’s an example of one

u/ravekitt · 2 pointsr/succulents

I actually have mine outside now so no need for a light. I'm probably going to look into something different for next fall/winter though.

If you get a couple clamp lights that should work well if your shelves are small. Look for a led or cfl bulb with a 6500 K color temperature and as high of a wattage as your lamp can handle. Something like this would be good because it can handle a very high wattage. I think you need to look for at least a 60w equivalence. The higher the wattage the more plants it will cover since you won't need to have the light as close to the plants. You don't need to look specifically for a growlight bulb. They're often overpriced for what they are and as long as you know what specs you need you can find regular led/cfl bulbs that are essentially the same thing but without the price markup.

u/SlayZomb1 · 2 pointsr/HotPeppers

My set up is a 200-something watt LED flood light (meant for security purposes) put into one of those cheap work clamp ballasts. Seriously $20-30 max and it makes a whole lot more light and might actually save space compared to that. Here's some links so you get a better idea.

https://www.lowes.com/pd/SYLVANIA-ULTRA-250-W-Equivalent-Dimmable-Daylight-Par38-LED-Flood-Light-Bulb/1000231265

https://www.amazon.com/8-5-Inch-Reflector-150-Watt-Dawson-Bros/dp/B071WJPWL2/ref=sr_1_4?ie=UTF8&qid=1525419221&sr=8-4&keywords=work+clamp+light

EDIT: I use this same setup and my Butch-T's went from saplings to no joke at least 10 leaves (4 full sized ones) and grew about 4 inches within 2 weeks. Keep the light close to the plants. You can since it's LED with less of an impact on heat.

u/pinkspatzi · 2 pointsr/succulents

So I started with several of these and they did absolutely nothing: https://smile.amazon.com/gp/product/B01E79J9HE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

Then I went to these fixtures and they were better than the clip lights above:

https://smile.amazon.com/gp/product/B000HHQ94C/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

With these bulbs:
https://smile.amazon.com/gp/product/B015G9N3S0/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Now, I'm using this for most of them:
http://www.gardeners.com/buy/stack-n-grow-light-system/8590134RS.html#start=2
This came with T5HO bulbs - I found it on clearance or I wouldn't have been able to afford it.

And, I'm using this: http://www.horticulturesource.com/product_info.php?products_id=18197&gclid=CPTjkKW2uNECFdWLswod5ngIyA

for my tall Crassula compacta - this light is my favorite!

u/Frosty_Bud · 2 pointsr/Autoflowers

Yeah if you flower under that you'll probably get some stretchy light leafy buds. It doesn't have to be a single 125w clf. Get some regular 2700k soft white cfl house light bulbs at Lowe's and a few cheap lamps or a multi socket lamp if you can find one. Or just buy some of these and swap them for yours when it's flower time.

u/soupcxan · 2 pointsr/HomeDepot

It was $60 vs $69 the item sold directly by amazon. But the MOD didn't even look at that, she just refused Amazon in general.

https://www.amazon.com/gp/product/B00KWRM78E?pf_rd_p=c2945051-950f-485c-b4df-15aac5223b10&pf_rd_r=TKBN63FXQXCHGYX5VF26

u/thearchtect16 · 2 pointsr/microgrowery

1.) It smells, it's strong, and the smell carries very easily - I would try to use a carbon filter with a vent even though you're growing in an outhouse.

4.) I put 4 cfls on the sides of my plants by clipping them to the corner poles of my tent with these. I know you don't have tent poles to clip to, but I'm sure you would figure something out. I swear by it as I use 23w (actual) bulbs so I'm basically adding just under 100 extra watts for flower

u/DisfunkyMonkey · 2 pointsr/SkincareAddiction

Mine was like this but that LED one seems much better. I did illuminate a wide area in a dark interior bathroom, so a small diameter beam wouldn't be the same. But a wide beam like that looks great.

u/Eponym · 2 pointsr/AskPhotography

This could be done cheaply, if you borrow a camera and download a free trial of adobe lightroom.

If you buy a couple of bright high CRI lights and reflectors, the lighting setup wouldn't be that expensive.

If your goal is to enhance texture, a bare bulb (no filters) would be best.

Place one light camera left and the other camera right. The more you angle the lights perpendicular to the surface, the more detailed the texture will be. (think of long shadows at sunrise and sunset)

Make sure to apply Lens Corrections for your camera body/lens in lightroom for optimal image quality.

And whatever you do, don't use the camera's flash! You'll have major specular issues or glare.

u/ImElkay · 2 pointsr/AutoDetailing

I ordered the Scangrip matchpen light. Thus far I've always used a handheld spotlight made for hunting. If I wanna have a constant source I use a halogen work lamp, but they get soooooo hot.

Edit: This is copy pasted from when I asked a similar question

https://amzn.com/B00OJOCDJO I found these for $25 at costco, started with one and went back for 3 more. Works pretty good for checking your work.


I personally use a Fenix PD32 for most of my work, with a Fenix LD10 and Olight S1 serving as backup. I've been eyeing the Zebralight H600 too, since it's insanely bright, can be used as a headlight and the 90 degree head lets it be clipped on clothing to shine as you work too.
/r/flashlights is a great community to ask around as well! Be careful though, might start another hobby....;)

u/collenchyma · 1 pointr/PlantedTank

I would get clamp lights with daylight (5000-6500k CFL bulbs! Should run you $10-12 bucks. I have two over a 10g, but that's because it's heavily planted. You would want one that's at least 8 inches, like this one.

u/thegildedturtle · 1 pointr/reptiles

I can't say for certain, but I wouldn't want to risk burning my office down or lighting the cage on fire.
Perhaps the pencil solution combined with the relatively low wattage of the heat lamp will work as a temporary solution. You probably also want to look into getting an outlet timer if you don't have one already.

Perhaps a more permanent solution like this:

www.exo-terra.com/en/products/light_bracket.php

Or maybe something like:
https://www.amazon.com/Woods-2-Gauge-Brooder-150-Watt-120-Volt/dp/B000KKHRXI/ref=sr_1_2?ie=UTF8&qid=1485203528&sr=8-2&keywords=heat+lamp+cage

I've used both and they seem to work okay. Just make sure to clean the surface you stick it to really well...and that you never need to remove it afterwards.

u/niccig · 1 pointr/MakeupAddiction

Lol I know just what you mean, the Home Depot here sucks too. Here are the Ottlite bulbs on Amazon, and the lights are something approximately like this (I'm not sure of the exact brand I have). If you're looking for the bulbs in store, this is what the packaging looks like (and just fyi, I took that photo using the other Ottlite bulb, and didn't do any color adjustments to it - the light is super nice).

u/javamoss · 1 pointr/Aquariums

Plants-if you get some lamp reflectors and pair them with some LED bulbs and you should be set. Amazon is probably more expensive than picking them up in person, but if you don't have a car it works.

I based those recommendations off of the tank being a 10 gallon, otherwise you might want to go up in size for the relative products for your tank size. You'll need a lid to set them on, and should get a good surge protector power strip to plug them into (timers are great to keep the lighting cycle consistent too). Drs Foster&Smith have free shipping over $19 this weekend so you could pick up a glass lid and a black or blue background from them for a decent price (maybe pick out a statue or wood piece for a centerpiece, make sure the betta can't get into any holes and get stuck). You can always "cheat" and put a few fake tall silk plants in the back to make it instantly look greener too.

You can put a lot more plants in your tank, a few of the plastic packs from petco/smart of java ferns or cryptocoryne wendtii (lots of species w diff sizes so check them out) could fill the tank out. There's also many sellers in /r/aquaswap that sell various plants that would set you up with a good low tech package.

u/DashingSpecialAgent · 1 pointr/Chameleons

I have a bit of a custom setup. I have a basic 10inch reflector kinda like this: http://www.amazon.com/Woods-0162-2-Gauge-Reflector-150-Watt/dp/B001KDVY42/ref=pd_sim_sbs_lg_4?ie=UTF8&refRID=02MDR8Z3XKP81S6KX8CZ that I took apart and combined with a cage holder somewhat like this: http://www.amazon.com/Metal-Lamp-Guard-Black-Replacement/dp/B003BDNNZ2/ref=sr_1_2?ie=UTF8&qid=1407390242&sr=8-2&keywords=cage+bulb+protector

Together they sit on top of my cage to provide heat. A bit of an older picture but my setup: http://i.imgur.com/NXDpSvK.jpg I made sure the temp was low enough that I could rest my hand against the cage directly under the heat for a good 30 seconds before it got so uncomfortable I had to move.

I think mine is a 100watt heat bulb. I have his heat bulb, UV, and auto mister on a timer. They are on from around 6:30AM to about 7:30PM. Ambient temperatures are about 75 normally. 80 on hot days.

One of the reasons I got a ceramic heat bulb is in case I need to provide heat at night in the winter. It doesn't emit any light so I can use it without waking him. Though I may need to relocate him if that becomes an issue. Right now I cover his cage with a towel once his bulbs cool so he can sleep between when he goes to sleep and I do.

u/blaisewilson · 1 pointr/PlantedTank

The light you have certainly won't be enough for even low light plants in a tank that deep. I Have a 30 gallon hex tank 24" deep that I would consider medium light It has a 21 watt led spotlight bulb in a cheap clamp lamp reflector. LED's require much less wattage than other types of light. I kept the glass cover and put the lamp on top in a cheap clamp lamp reflector, it isn't the most attractive, but it works well. If aesthetics are important, you could build a hood for the tank to house the lighting. A hex hood isn't the easiest thing in the world to make though, and is probably expensive to buy/have made.

Something like this bulb would probably be at least enough to give you low to medium light in that tank. I had to buy off Amazon because no local stores had the correct type of bulb in the right wattage and color temperature.

http://www.amazon.com/JACKY-Equivalent-Standard-Lighting-60%C2%B0degrees/dp/B00IBTDX88/ref=sr_1_5?ie=UTF8&qid=1410142468&sr=8-5&keywords=par+38+led+cool+white

And this is the type of reflector I use. Though I just bought mine at a hardware store.

http://www.amazon.com/Woods-0151-8-5-Inch-Reflector-150-Watt/dp/B000HHQ94C/ref=sr_1_2?s=hi&ie=UTF8&qid=1410142540&sr=1-2&keywords=clamp+lamp

u/rtechie1 · 1 pointr/gadgets

The problem is that most 12V DC devices draw a lot of power (like your heated jacket) and so because of that the batteries with that kind of output are all on the larger side. This is the smallest one I could find on Amazon.

u/scottyaewsome · 1 pointr/Skookum

A more relevant they do

I own this, OP's looks better..

u/Terminal_MTS · 1 pointr/Aquariums

The cheap LEDs in those kits can’t grow plants. I’ve tried. I didn’t get growth until I set up a contractor light on my 5 gallon with a 23 watt cfl 6500K. Now I have 8 on 3 tanks.

https://www.amazon.com/dp/B00M6SR1JM/ref=cm_sw_r_cp_api_i_Q90xDb7JCYWQH

And used something like this

https://www.amazon.com/dp/B009ONXWC2/ref=cm_sw_r_cp_api_i_O-0xDbV4F06PC

u/Nightshade400 · 1 pointr/Twitch

I currently use one of these bounced off the back wall and using a 60w LED bulb. Cheap and effective for now but Idid have to play with positioning a little to get it right.

https://www.amazon.com/Woods-Clamp-Aluminum-Reflector-Listed/dp/B000HHQ94C/ref=sr_1_3?ie=UTF8&qid=1511544627&sr=8-3&keywords=utility+light

u/schneems · 1 pointr/woodworking

Those miter saws are gorgeous. I'm "storing" a 12" dewalt miter saw for a friend, but if I weren't I would probably get that bosh.

Do you have any lasers or guides for it? I'm using a http://www.amazon.com/DEWALT-DWS7085-Miter-Saw-Light-System/dp/B000X9EDD8 on the dewalt and really like it, but it is dewalt specific.

u/lshiva · 1 pointr/BurningMan

I think this was back in 2003. Even if they still made them I have no idea where to get them. There have to be more efficient versions by now. They were fluorescent tube UV lights powered by about a dozen AA batteries. About as long as my forearm, which is where I strapped them. I also put one on my bike which worked pretty well.

Edit: Something like this Fortune BL-A7 Portable Black Light, 6.5" Length x 1.6" Width https://www.amazon.com/dp/B006T64ME4/ref=cm_sw_r_cp_apa_yZXxxbCWV8KM6

u/IncredibleMacho · 1 pointr/Twitch

I have a c920 and I am not disappointed. I subscribe to the belief that your camera is only as good as your lighting. Shit lighting will make a great camera look like shit and great lighting will make a shit camera look great.

I bought that exact screen from Amazon [link], but in retrospect I should've just gone to a fabric store and gotten a green sheet, because that's all it is. It is not special in any way. It is super thin though, so I just double mine up on a custom frame made with PVC pipe (cost of tools and materials was around $20). The good thing about the PVC is that you can measure your space and build a custom frame that fits your needs.

I found some awesome clamp light fixtures at Wal-Mart [example]. In my case I clamped them to my desk and a nearby window sill, pointed at approximately 45 degrees toward me and the screen behind me. The positioning is important in that you need your screen evenly lit and you need to not cast much of a shadow onto it. Luckily I have the space to put the screen far enough behind me and eliminate most shadow problems.

The bulbs I got are bright as hell though, so I've got [these] soft boxes on the way. These are not so much for the lighting itself (although I don't think it'll hurt) but for my own comfort. After only a few minutes of having those lights in my peripheral vision it got uncomfortable.

I also have a light almost directly above me, which rounds out my setup so far. Key light, fill light, and hair light. A Google search on studio and green screen lighting would benefit you. Good luck!

u/jlablah · 1 pointr/exmuslim

According to the article light therapy works for both. I use a halogen lamp that you can get at the store for $20 usd

https://www.amazon.com/Designers-Edge-L20-Portable-Handheld/dp/B000IJRMWM/

You can get different types of lamps from Amazon specifically for SAD that work too. Those are more expensive and potentially less reliable than the cheap hologen work lamp which provides around 8000 lumens. SAD lamps usually provide around 10,000 lumens. You can get two halogen work lamps and get 16,000 lumens. The intensity of the light makes your brain think it's the day and regulates your pituitary gland.

u/ThellraAK · 1 pointr/gadgets

this

For the weight sensors.

As far as the crontab issue you are facing, is their anything else in the crontab that you need?

You could just write a script (would need to run as root or sudo) to update the crontab in a way that you want

this will send you in the right direction.

Another way you might do it, if everything runs relative to one another, I.E. They should all be run at once, you could wrap that up into a script, then run that one script from crontab.

Another option would be to forgo cron all together and write a script that sleeps for a minute at a time, checking for the time, then when it's about the right time, sets off (within a minute or two should be super easy)

If you are having a hard time waking up,

something like this

to send power to something like this

might be something you want to consider.

u/waxyourboard · 1 pointr/DIY

[Here is a better option] (http://www.amazon.com/HitLights-Rechargeable-3800mAh-Lithium-Connector/dp/B007RQW5WG/ref=sr_1_1?s=hi&ie=UTF8&qid=1405311237&sr=1-1&keywords=12v+lithium+battery), in my opinion. Or [this] (http://www.amazon.com/Portable-4500mAh-Rechargeable-Battery-Wireless/dp/B008UKKXRC/ref=cm_cr_pr_product_top) I would also take a look at building your own battery pack [similar to this] (http://www.amazon.com/ExpertPower%C2%AE-3500mAh-Extended-Battery-iRobot/dp/B007V6UL1Y/ref=sr_1_95?ie=UTF8&qid=1405311619&sr=8-95&keywords=14.4v+battery). The first two look like they might even plug right into your amp.

Heck even [this] (http://www.amazon.com/12v-Standscan-Battery-Power-Pack/dp/B00BTGTJPG/ref=sr_1_4?s=electronics&ie=UTF8&qid=1405312250&sr=1-4&keywords=12v+portable+battery) would work better and be cheaper/lighter if you put some rechargeables in it.

I would want any battery pack around 12-15V. I would also consider getting a [cheaper amplifier] (http://www.amazon.com/LP-2020A-Lepai-Tripath-Class-T-Amplifier/dp/B0049P6OTI/ref=pd_cp_e_0). It uses the same amp chip (ta2020) as the one you posted

Edit: Essentially, I wouldn't want to carry around 7 pounds of lead acid batteries when I could carry much lighter batteries to do the same job.

u/captainredpath · 1 pointr/AJelqForYou
u/MilkPudding · 1 pointr/bettafish

/r/PlantedTank is a great resource.

And as long as the bowl is big enough to allow for enough substrate, you can dose fertilizers, CO2, and have lights just like a tank, there's really not much difference.

My go-to heater is the Hydor Theo, this is the heater I'm currently using in all my tanks including my bowl; I love it because it's pretty compact plus it is adjustable, so you can turn it higher or lower to suit whatever fish you're keeping or turn the heat up to treat certain illnesses.

For filters, basically the only thing that's probably out of the question are HOB filters since they can't fit on the rounded edge of the bowl, otherwise any small filter will do. A lot of people use sponge filters, which are great for a small tank. I currently use this corner filter which I hook up to an air pump and filled with my own filter media (ceramic media, Seachem Purigen, and filter floss).

For lighting, on my bowl I just have a clamp light with these 6500K 1600 Lumens CFL bulbs screwed in, which are the same bulbs I use for growing my terrestrial plants. Clamp the lamp to a shelf or some other surface near the bowl, not the bowl itself.

u/manhatinglesbian · 1 pointr/gardening

I like to use clamp lights from the hardware store. Then again you need something to clamp it to. Just use "daylight" fluorescent bulb unless you need it to flower or fruit indoors.

A cheap mechanical timer switch is super nice to have too.

u/Solnx · 1 pointr/plantclinic

Good idea think that would connect with

Woods Clamp Lamp Light with Aluminum Reflector, 150W, UL Listed, 6- Foot Cord https://www.amazon.com/dp/B000HHQ94C/ref=cm_sw_r_cp_api_i_i32vCb5X5VPKN

u/chuberific · 1 pointr/woodworking

One surprise I had with the newer non-sliding dewalts is that they won't take the LED light attachment that makes the shadow right on the cut line.

http://www.amazon.com/DEWALT-DWS7085-Miter-Saw-Light-System/dp/B000X9EDD8

Ordered it on amazon and then had to return it and get the Irwin laser guide, which so far has been fine, but you have to start the saw to see it and know that it's just to the left.

http://www.amazon.com/Irwin-Industrial-Tools-3061001-Miter/product-reviews/B0009XYN4M

Another kicker is how often I've seen these pop up on Craigslist lately at pretty solid prices. If you have a few weeks to stalk craigslist you might do better, if you don't mind the hassle and you know what you're looking at.

u/Bullroarer_Took · 1 pointr/photography

For portability your best bet is using flashes like speedlights and a remote trigger to fire them. You'll also need items to diffuse and/or reflect them and it will take quite a bit of practice to get it right. http://shop.usa.canon.com/shop/en/catalog/lenses-flashes/speedlite-flashes

For more ideas, here is a good article on various DIY options for various budgets: http://strobist.blogspot.com/2013/11/50-diy-projects-for-lighting.html

edit: I just bought this for my dad for his garage, but didn't consider it for a photo light until just now. Not sure if this is a good idea, but its an idea. I've heard of people using hallogen work lights, but those get really hot, while this will stay nice and cool and won't melt your crap: http://www.amazon.com/Snap-922261-2000-Lumens-Light/dp/B00OJOCDJO/ref=sr_1_sc_1?ie=UTF8&qid=1457677772&sr=8-1-spell&keywords=led+shop+light+hallogen

u/darthbogart · 1 pointr/Homebrewing

I've got a Johnson Control A419 temp controller. It's got a jumper inside the unit you can adjust so it's on either cooling mode or heating mode.

When it's on heating mode, it will kick on when the sensor detects the temperature is too low instead of too high. Instead of plugging my fermentation chamber chest freezer into the unit, I plug in a ceramic heating element (available at lots of pet stores and online, sold as terrarium heaters for reptiles) mounted in a simple work lamp from Home Depot or wherever. Then I position the lamp in the chamber with the carboy, put the controller probe in there like normal, and shut the lid.

This is the method I used to make my first saison. Pumped the chamber up to about 90F. Worked pretty great!

u/spin_fire_burn · 1 pointr/IndoorGarden

I picked up an indoor greenhouse for $20 at Ocean State Job Lots. I got a couple of these lights for the top and some small fluorescent strips for the bottom shelves. I know the light is helping, but I think the humidity is helping even more.

u/CounterfeitPigeon · 1 pointr/Aquariums

I'm currently starting up my first planted tank, a 29 gallon, and lighting has turned out to be a bit more complicated than I expected it to be. I bought my tank with a hood, and it has this light fixture. I'm pretty sure the light is 24" long. Is there a good, cheap bulb I could get to fit it? By cheap, I mean somewhere under $40, as I'm on a college student budget.

If there's no cheap lights like the one pictured, would two of these with these light bulbs work? I've heard that you want 2-5 watts per gallon (the above light bulbs would lead to about 4 watts/gallon) and 6500k (is that correct)?

u/noideawhatimdoing8 · 1 pointr/Septemberbumpers2017

Deep breaths - one day at a time, just divide little things to do and tackle them one at a time. Maybe in the meantime you could get your son some LED battery-powered lights like these, this, this, or this. It's not the same as running some electrical in, but it will do if he wants a little bit of time to himself reading before bed.

u/riclor · 1 pointr/hydro

Okay, thank you for that tip.

Workshop lights is probably the wrong term, sorry. I mean something like this.

Just one CFL would do for this?

Space isn't a huge problem, but I live in a flat so I just want something small like a 5-gallon bucket in my bedroom. What would be the best way to hang up that light bulb if it would do?

Thank you

u/NegativeGPA · 1 pointr/zen
  1. Get a full-spectrum lamp and light bulb.
    This is no joke. Step 1. It will cost you about 20 bucks. Stick it next to your computer and leave it on whenever you're sitting there. I'm not kidding

  2. Diet and exercise.
    Eat the same thing every single day. Lift once a week

  3. Meditate.
    Download Headspace and try it for a week

    If you're actually depressed, then this list of 3 "to-do"'s will be overwhelming. How would I possibly know something like that?

    That's why you should only focus on step 1. Click the links. Find 20 bucks, buy the lamp, buy the bulb. It's super silly, but so are we
u/robot_overlords · 1 pointr/synthesizers

i bought one locally but this one on amazon looks like it might work https://www.amazon.com/HitLights-Rechargeable-Lithium-Ion-Battery-Pack/dp/B007RQW5WG/

u/2vague · 1 pointr/AutoDetailing

These https://www.amazon.com/Snap-922261-2000-Lumens-Light/dp/B00OJOCDJO are on sale at Costco for under 20 bucks.

u/MagiicHat · 1 pointr/DIY

Good screwdrivers are nice, but you really need 6-8 sizes, and that's over $20.

A wonder bar is probably one of my favorites:
http://www.amazon.com/Stanley-55-515-12-3-4-inch-Wonderbar/dp/B00002X1XT

Although not technically a tool, a nice LED work light is amazing. With a bit of patience, you can find one with 1000+ lumens near the $20 mark. This one is more, but I needed an example before my bathroom break was over
https://www.amazon.com/dp/B015E6M23C/ref=cm_sw_r_other_awd_nIMOwbPB7M5NY

u/responsitamer · 1 pointr/PlantedTank

I use a work light fixture like this suspended with a bracket from the wall with an 5000k 9.5W LED bulb like this. I just wanted to make something quickly from what I had around.

u/hatts · 1 pointr/IndoorGarden

Mint, rosemary, and basil are standard easy herbs.

For a dead-simple setup, you can buy 2 of these and two of these and clamp/hang them about 1 ft above the tops of your herbs. Then put a couple pots on/under a wire shelf like this.

I like these kinds of installations because there's really no "building" and they can be moved around easily. Metal wire shelves are also very versatile so you can reconfigure/repurpose them as needed.

u/ledd · 1 pointr/videography

What is your budget? That is most important here. Im assuming 300 for the camera since you were gonna go with the go pro and maybe around $100 for the rest of it? I say no on the Go Pro as the Wide angle lens is gonna make people look ugly. I say go on ebay and search for an HV30 or or HV20. You can get them for $300
and if your luck enough sometimes with a shotgun mic. But make sure you look around at prices because the mic included inst worth the huge jump in price seeing as its only around $50 new.

Next I say go with about 4 of these and follow this tutorial as best as you can. You'll want to defuse the light, the best option for no budget is just use wax paper.

I am not super familiar with Consumer Camcorders as I only use DSLR and read up on prosumer things but I can vouch for the quality of the HV30. I borrowed one from my school once and the image can be very sharp.

u/caspianx67 · 1 pointr/photography

Since the camera doesn't have a hot-shoe, you're definitely going to have to be more "creative" with lighting.

The gear used in studio portraiture is there because the photographer is controlling all aspects of the shot. You can substitute other equipment to give you similar control, resulting in photos that achieve similar effects. However, without the specialized gear, you'll be improvising. And while you're doing that, you'll need to know what's being accomplished by the specialized gear, and what you can and cannot simulate by other means.

The camera used for most portraiture is generally a DSLR (or 35mm film). The large sensor (in comparison to the point-and-shoots) results in better image quality, and higher resolution images suitable for larger prints. Your camera has a much smaller sensor, so you'll have to be content with the resolution it gives you.

The lenses used are often "fast" -- f/2.8 or wider -- allowing for fine control of the depth of field, and creamy bokeh (the blurry background), which in turn makes your subjects "pop" in the image. Your camera has a single lens, which you cannot change. You should be able to adjust the aperture setting in some of the shooting modes -- you'll have to look at your camera manual to figure out how to do that.

The multiple flashes and flash modifiers allow for fine control the amount, direction, and quality of light. The flashes can be set for varying intensity, moved to different locations, and fire behind softboxes, bounce off walls or ceilings, through a snoot or grid to eliminate spillage, etc. These multiple light sources illuminate the subject, and give depth and texture that gets blown out when using the on-camera flash (note, this happens with both point-and-shoot as well as DSLR cameras -- on-axis flash tends to flatten textures).

Realistically, you only have control of the light. You can use some clip on utility lights similar to these on Amazon, with total spectrum CFLs or incandescent bulbs. You can build some DIY light modifiers (like a screen for a soft-box) to soften the light hitting your subjects. Plus, you can never have enough clip lights for working on stuff around the house!

Combine the clip lights with dimmer switches, and you will be able to vary the amount of light coming from each source. Of course, you'll have to pay careful attention to the white balance of the image, and I recommend getting a grey card or cloth, and shooting that after you change the light intensity. One great tool for this is the Datacolor Spyder Cube, which has 18% grey, white, and black faces, an absolute black hole, and a reflective ball for specular highlights. But again, that adds gear. Without a neutral grey card or the Spyder Cube, make sure you include something white or grey in a test shot to white balance against. If you use something white, just be aware that it's easy to blow out the white when exposing the image, and that makes it lots hard to use as a reference for white balancing...

You can get acceptable results with a single light source (whether that's hot or cold continuous lights, strobes, studio flashes, or something as simple as a North-facing window where all the light from that direction is diffuse reflected light). You can get decent results with a single light and a reflective surface on the other side (effectively behaving like two lights) as the key and fill lights. You get better control with two lights, key and fill. You get better results if you can add a hair light to bring some directional illumination from above. And still better results if you can control the amount of light on the background. In each case, you need to understand what each light is doing and experiment with different placements so that you know what looks best with your subjects.

The other non-gear aspect of studio portraiture is the positioning and posing of your subject(s). That also requires a lot of research and practice...

The best thing about digital though, is you can start shooting right away, and keep looking at what you've done, and keep getting better!

u/ExplicitInformant · 1 pointr/entp

Did not submit wishlist to ISFJ Mom-Santa early enough. Was informed that gifts for me were purchased a while ago, and it is too late... :)

Things that I really enjoy having that I would have enjoyed receiving as a gift, though (even if I got them for myself....):

  • Bath overflow cover: If you're buying for someone who likes baths. Because baths are warm and awesome -- especially living in the relatively chilly midwest USA.

  • Some kind of black light: Worked well as a gift when I was younger -- it would depend on the individual if they are older. It made for a long series of fun, "does this glow?" experiments -- and even now, I'll still sometimes trot it out to see if it glows.

  • More expensive, but a device that gives you information on yourself -- such as sleep quality, activity level, etc. Don't have one myself, but would want want. The more independent it is from me doing stuff to it, the better. For instance, if it can actually detect when I am sleeping, that would be really cool -- even if it is sometimes a little off!

    I can't think of many other things that aren't even specific to what I like. I'm definitely trending after my (I think ENTP) Dad in the, "hard to shop for; if wanted a thing badly enough, probably got it for self a while ago instead of waiting arbitrarily for Christmas in order to tell someone to get it/hope someone gets it."
u/Crabbity · 1 pointr/Cartalk

no, but i can suggest this $50 light, as the best work light ive ever had.

https://www.amazon.com/dp/B00OJOCDJO/ref=asc_df_B00OJOCDJO5155871

u/oilxxx · 1 pointr/IndoorGarden

Woods Clamp Lamp Light with Aluminum Reflector, 150W, UL Listed, 6- Foot Cord https://www.amazon.com/dp/B000HHQ94C/ref=cm_sw_r_cp_apa_i_7QhTDbFBMYY1P

u/kknallay · 1 pointr/buildapc

You can get cheap headlamps just about anywhere. Or depending on what you do around your house, it's worth investing in a work light with a tripod/stand.

u/artoink · 1 pointr/AskElectronics

You don't want to use that bulb.

  • Exposed halogen bulbs are super hot and very sensitive. You cannot get water, oil, dirt, or even finger grease on them or they will burn out (Even burst!).

  • It's a mixed low/high beam bulb, so it has a little cap on the top to prevent blinding other cars and instead relies on the housing to reflect the light out. It projects almost no light straight forward. You'd also need to wire the low and high pins together to get the full 55w out of the bulb.

  • H4 bulbs use a spring loaded pin to hold them in place, which might be hard to mount without something made specifically for it. Potentially that could be easier, depending on where you're putting it.

    Instead use an H4651. It's essentially a halogen bulb inside of a glass reflector case. It is a high beam. It is only two pin, but still uses the same connector. You can find these at any parts store, probably even Wal-Mart. They're cheap too. It won't get nearly as hot, and isn't susceptible to damage from water and other contaminants.

    In all honesty, if you just want a work light you're going to have a hard time beating out one of old standards.
u/g4r4e0g · 1 pointr/Darts

Go BIG or go home. j/k

Is there an outlet and you could use a desk lamp as a spot light? You can get those for under 10 bucks. It make actually be worth just leaving there if you frequent the bar enough.

u/idgaf_aboutkarma · 1 pointr/PlantedTank

I am currently running a 10 gallon open top planted tank with a setup as you describe. The lamp I am using is similar to this with a 60 watt CFL grow bulb. It's working great and my dwarf hairgrass is thriving.

u/E_1999_Eternal · 1 pointr/microgrowery

It's flowering! If you get 7-8 hours of direct sunlight per day in that spot, you'll still be pushing it for adequate light.

What I did with my windowsill grow was add some cheap CFLs in my closet for after the sun went down. One 42-watt CFL bulb cost $7.50 on eBay & you can also get a [reflector/socket] (https://www.amazon.com/Woods-Clamp-Aluminum-Reflector-Listed/dp/B000HHQ94C) there for like $6 too. If you add a [2-way Y splitter] (https://images.homedepot-static.com/productImages/291fd83d-0bc2-4cda-8c39-007dcaf587c8/svn/leviton-lamp-accessories-r52-00128-00w-64_1000.jpg) ($3) you can then have space for another CFL bulb ($7.50) inside the reflector which will double your lumen output. Might need a [socket extender] (https://www.ebay.com/itm/291353731438?_trksid=p2047675.m570.l6035&_trkparms=gh1g%3DI291353731438.N43.S1&autorefresh=true) too, which is no big deal since they're like $3. But you could always just get the one CFL bulb if you're just growing one plant & it gets adequate sunlight.

Bulbs in the 2700k or 6500k spectrum will work. Just make sure the wattage is high enough--but not TOO high. Anything over 45 watts is inefficient from what I've read. Look at actual watts, not equivalencies. CFLs are a cheap way to supplement light that don't use a suspicious or crazy amount of electricity. Totally doable.

u/LNMagic · 1 pointr/buildapc

This will be difficult because this is a very uncommon configuration.

I do know of a couple monitors made by DoubleSight which use USB for both power and video signal (rebranded and refurbished for $42 at tigerdirect), but because the video goes through USB it will require a little bit of CPU power. It's a non-issue even with my Core 2 Duo (same story with netbooks - not a problem), but I don't know if there's a driver or enough power in the Raspberry Pi for this. Touch screen could be a nice feature, and you don't even have to use it.

The next thing I could suggest which has some use would be a Lilliput (which specializes in small monitors, and will have the greatest selection of features and inputs) or other kinds of field monitors. Probably the only way to get something affordable will be to avoid HDMI, since at that price range you'll need something a little older.

Finally, if you really want to get your hands dirty, check out a Chinese monitor kit from eBay. You'll need to make your own case, but you may even have fun with that!

Edit: I also found a battery/charger which looks promising.

u/paulexcoff · 1 pointr/airplants
u/Kardolf · 1 pointr/flashlight

I was given a light for my birthday earlier this year by someone who uses them for work. It's available through Amazon as the 15W 24LED Spotlights Work Lights Outdoor Camping Lights, Built-in Rechargeable Lithium Batteries With USB Ports to charge Mobile Devices. I haven't used mine a lot, and it's got some funky blinking red/blue lights that I have no need for at all, but it works pretty well for under the hood, or other darkish places. This does have the battery, and it's not super bright, but for the cost, you can pick up several of them, and have really good coverage of an area without any problems.

u/QuietKings · 1 pointr/fakeid

Which one do you use? I use this one and it works pretty damn well for it's price.

u/GIS-Rockstar · 1 pointr/photography
  • Night or dusk might work, better especially if there's any kind of interesting view out that window. If not it's okay to blow it out a little. Try a few shots in the evening when the incoming light won't be so harsh that it distorts the area around the blinds. Open then a bit so that the light bounces up to the ceiling. Try a few different angles and see what works best

  • Start by setting up softer light. See that hard shadow from the desk lamp? It looks like a ceiling fan light which is pretty hard light; and a little too warm (orange). It'd be nice to diffuse that and use a cooler, whiter/bluer bulb. You can play with these cheap reflector combos that have a translucent inner section that you can shoot light through to make it a much "bigger" source of light, thus softer shadows. You can rig that up and play around with it and see what that gives you. If your walls aren't white, the cold daylight CFL bulbs can add some color to the room by bouncing off those wall colors

  • For an even bigger light source, bring in a couple white-ish CFL bulbs and point them at the ceiling with one or two clip lights. Any DIY rig is fine as long as you are bouncing the light of of the walls or the ceiling to make a bigger light source

  • Switch the headphone stand with the plant and turn on the desk lamp to shine light on it. You might need a less powerful bulb or a dimmer switch of some kind to match the exposure

  • You could go for a more dramatic image by waiting until night, and using those clip lights and foil to make spotlights (snoots) and really control where areas are illuminated. Use cellophane or a cheap pack of gels for colors if you're into that.

  • Check out a YouTube channel called "workphlo." Dude is a master of quick, "easy," DIY studio lighting and editing tutorials. It's very inspiring to play with lights and compositing in Photoshop/Gimp
u/When_Ducks_Attack · 1 pointr/AnimeFigures

> I had a lamp that uses the bulb

Not that I'm trying to sell these to you, but I originally began by using simple clip-on work lights.

u/Current_Selection · 1 pointr/succulents

I've been browsing the grow light thread and thinking about getting more succulents before winter, and would like some input on which setup seems better or if you would recommend something else entirely. This adjustable growlight which has a gooseneck and clip (also comes with option for timer) or this bulb and this clamp light? I currently don't have many succulents at all (which obviously can change) so I don't need the light to cover a huge area. Should I set up a specific area to do this with shelving etc (please recommend if so) or is on top of a cedar chest on trays fine?

I'm pretty new to this and appreciate any advice I can get here.

u/mitchellered · 1 pointr/succulents

I have the one you linked. I think it's okay but probably not bright enough for my succulents and cacti to thrive throughout the winter. I've mostly been using them for my succulent props though and they do great under it. I recently bought this lightbulb and this fixture to use on a few of my succulents for the winter. I read that you need a fluorescent light bulb with at least 6500K. I'm hoping this setup works because I can't afford anything much more than that for my plants lol.

u/tknee22 · 1 pointr/succulents

It's this guy. I would be willing to get a different fixture as well.

u/OutofBoundsDG · 1 pointr/AutoDetailing

Thanks! I looked at this one but the pics seem like it wouldnt be bright (size and such) so to hear some feedback is really good! Thinking of getting a small light like that one then a bigger stand with like double lights. https://www.amazon.com/gp/product/B0002YW2C8/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

Like that one

u/senexproxy · 1 pointr/succulents

Thank you! This is the lamp I'm using and the bulb is 100w 6500k CFL.

u/Kweri · 1 pointr/Aquariums

Just two clamp lamps on top with some 12W 6000k LEDs. The clamp lamps aren't actually clamped on, just the reflectors sitting on top of the glass lid.

Clamps
Bulbs

u/Ochrocephala · 1 pointr/parrots

https://www.amazon.com/gp/aw/d/B009ONXWC2/ref=sspa_mw_detail_2?ie=UTF8&psc=1

You should invest in lamps like those. Use a 40-60 watt bulb (halogen, not LED) and keep the cord out of reach (they can and will chew through it, often without any side effects besides the occasional weird little scorch mark on the beak).

Your birds can handle almost any temperature you feel comfortable in (unless we're talking certain finch species). Just be sure there are no breezes on them. If you feel like they are cold, use a lamp like above set to one side of their cage so they can get out from under it if they get too warm.
If for some reason (super cold winters, bad heating in home, etc) your home gets below 55 Fahrenheit, those lamps will provide the warmth they need.
The lamps are also extremely useful for keeping a recently bathed bird warm while they dry, or an ill bird warm. A sick bird needs warmth so it can focus on using its energy to heal itself instead of struggling to keep warm.

Of course, there is nothing wrong with keeping them warmer than the rest of your house! Just be careful with space heaters, and make sure they are made for indoor use and cannot set anything on fire.

[Edit: accidently posted before finished!]

u/thelizardkin · 1 pointr/Aquariums

Get a couple of these lamps, than you get the brightest screw in compact fluorescent/LED lights you can afford. You want to look for something between 6,000-7,000 on the Kelvin scale, also known as day/cool light bulbs. These are the bulbs you want.

u/Butthurt12YO · -12 pointsr/HaggardGarage

Wonder how much he paid for the light? Astro makes the identical light for $58.
https://www.amazon.com/dp/B018R0XQPA/ref=cm_sw_r_cp_apa_WmpZAbDQGR42C

Edit: he paid $150 for 4 hammers? Lmao what a scrub.