Best lab utensils according to redditors
We found 400 Reddit comments discussing the best lab utensils. We ranked the 174 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 400 Reddit comments discussing the best lab utensils. We ranked the 174 resulting products by number of redditors who mentioned them. Here are the top 20.
Follow these steps I posted from another comment. Doing this will ensure you get pure, strong, and environmentally friendly carts.
Let me show you how to make your own refillable, non disposable, strong af carts. It takes time but it's so worth it, trust me. It comes out cheaper over the long run.
Step 1: acquire your favorite concentrate.
Step 2: acquire some empty carts with a little dropper tool. (or buy blunted syringes).
Step 3: buy shatter batter
Step 4: this is actually a list of steps that come with shatter batter. Basically you microwave your wax with the shatter batter for like 15 seconds. Make sure it's mixed good. Then you just drop it into your carts. Literally that easy. 10 minutes of your time gets you 3-5 carts.
Step 5: fucking bake in all your glory at being an independent bastion of toasty environmental awesomeness
I found this crazy setup at Walmart if all places that has the carts, shatter batter, and the dropper in one kit.
Not tech, but my parents found my syringes that I use to refill my fountain pen ink and they confronted me with worried faces. Honestly, they're blunt tip and stained blue and green. Maybe they thought I was into some really weird shit.
Please please please use the correct tips. Throw that thing in a sharps container somewhere and order these instead
Edit: Also for the love of god, everyone use a sharps container. Your trash guy doesn't need that struggle.
Not to worry, they're all still waiting for their Amazon order to arrive, so they won't be needing this quite yet.
https://www.amazon.com/dp/B06Y2JWDQ3/ref=sspa_mw_detail_0?psc=1
Open bore syringes are a thing my dude
Syringe
https://smile.amazon.com/Bstean-Syringe-Blunt-Tip-Needle/dp/B01HFTYINS/ref=sr_1_4?ie=UTF8&qid=1524590844&sr=8-4&keywords=blunt+syringe&dpID=518U71I8%252BzL&preST=_SX342_QL70_&dpSrc=srch
Explosive Elephant Toothpaste!! edited to correct ingredient - and update notes
My goal was big, shooting foam steams! I tried other methods and recipes - but this worked best!
What is happening in elephant toothpaste: hydrogen peroxide is made up of two hydrogen and two oxygen molecules. This is one extra oxygen molecule than water. Hydrogen peroxide is very unstable; it keeps wanting to lose that extra oxygen molecule. In this experiment, we use potassium iodide as a catalyst to knock off that extra oxygen molecule very quickly, and soap to capture those molecules of oxygen in foam.
I tried this with two different flask types: 2L Erlenmeyer flask and 2L graduated cylinder.
For each flask I needed the following:
To get (my best approximation of) 4 molar KI, I put 35 mg of nearly-pure granular KI in a small glass measuring beaker, and filled it to 50 ml with cool tap water.
If you use smaller flasks, you will need to cut the ingredients by about 1/2.
I was able to buy the chemicals and all the flasks online. Please be careful with the hydrogen peroxide – it will burn your skin at this concentration.
The result is soapy water - but there may be some residual hydrogen peroxide. Simply rinsing the area well should be sufficient.
Steps:
Pre-make the KI solution, and measure out all other chemicals.
USING GLOVES AND EYE PROTECTION
-- Put 250ml H2O2 in each flask
-- Put ~25-30 ml of dish soap in each flask
-- Add a few drops food coloring of color desired (complicates clean-up - be warned!)
-- QUICKLY add 50 ml KI solution to each flask and jump back!
Notes:
The graduated cylinder produces a thick pillar of foam, the Erlenmeyer flask produces more of a jet.
The chemicals should be added by an adult.
If you film this, be sure to have the person filming stand back, and be prepared to capture an 8 to 10 foot jet coming out of the flask.
Shopping list (what I used):
This puts out a thick column of foam:
213I16 Karter Scientific 2000ml Glass Graduated Cylinder, Single Metric Scale https://www.amazon.com/dp/B006UKIBKU/ref=cm_sw_r_cp_api_8OuWxbG8YRB8N
This puts out a narrow/taller jet of foam - I now have three:
2000ml / 2L Narrow Mouth Erlenmeyer Flask with Heavy Duty Rim https://www.amazon.com/dp/B00Q34D0HC/ref=cm_sw_r_cp_api_rQuWxb4708ZVJ
Pure Health Discounts Certified 35% Hydrogen Peroxide with 1 oz Bottle Dropper - 32 oz https://www.amazon.com/dp/B01AKIGJW4/ref=cm_sw_r_cp_api_YD4pzbZTGXC86
Potassium Iodide, High Purity Crystals, 99.8 % min., 100 grams https://www.amazon.com/dp/B008D8161I/ref=cm_sw_r_cp_api_PTuWxb0N94SZQ
Atlas Glove 620 Atlas Vinylove 12" Double Dipped Gloves - Small (they come in different sizes) https://www.amazon.com/dp/B002PJ0WRK/ref=cm_sw_r_cp_api_nUuWxbSQCV77N
Learning Resources Primary Science Safety Glasses (good size for kids) https://www.amazon.com/dp/B006ZLSWFI/ref=cm_sw_r_cp_api_SVuWxbBKKKD9R
Heathrow Scientific HD15909 Spatula with Flat End and Spoon End, 9" Overall Length (optional - but good for mixing the potassium iodide) https://www.amazon.com/dp/B0061OT1A4/ref=cm_sw_r_cp_api_qSuWxbA6R27C3
I have a few recipes I could give out, [VG and PG are on Amazon] (https://www.amazon.com/Glycerin-Vegetable-Kosher-USP-Pharmaceutical/dp/B00PSGWHIO/ref=sr_1_13_a_it?ie=UTF8&qid=1524904013&sr=8-13&keywords=vegetable+glycerine). and excigexpress is where I buy all my flavors. You also need a beaker set, .01 g scale, syringes, medical gloves, glass bottles for steeping, and plastic bottles
Edit: links
Homebrew Materials:
Vacuum Pump Oil
Vacuum Tubing
1/4" Barb x 1/4" NPT Male Hose Fitting
1/4" Male x 1/4" Female NPT Extension Hose
Vacuum Pump
Filters
Spatulas
Magnetic Stir Bar
Digital Hotplate with Magnetic Stirrer
Nitrile Gloves (Better than Latex)
Empty Capsules (Buy Separated unless you hate your life)
Capsule Machine (If you value your sanity, buy more than a 100... I hated my life doing this)
Mohr Pipets
Pipette 10ml
Mortar and Pestle (If you're doing orals, get this... Otherwise, you're playing Russian Roulette with your doses and liver)
Funnel (For pouring into small places)
Alconox (For clean your shit)
Temperature Gun (How hot is my shit?)
Graduated Cylinder (If you measure with beakers, you're a fucking idiot... And you should consider Volumetric Flasks)
Beaker Set
1 Liter Beaker (Because brewing en'masse is better)
Scale (I have a 2kg one, too)
Calibration Weight Set
Calibration Weight 100g (Because you need two for the scale linked)
Vacuum Regulator (Unless you want to filter 9001 times due to broken shit)
Oil (Any USP grade, filtered or unfitlered)
BB
BA
Butyl Stoppers
Flip Top Seals
Crimper
Vials (Unsealed)
Autoclave (Cheaper than an oven, why are you using an oven?!)
Weight Boats (Buy a million of these. They're cheap and useful)
Did I miss something? Probably. Yes.
I like my lab spoon/spatula.
Sturdy, long and cheap.
http://www.amazon.com/gp/product/B0061OT1A4/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
edit: To avoid confusion. Both ends of this tool are flat. It works fine for stirring and scooping sugar or jams for example but it doesn't have a true concave spoon on it. FYI.
>Nah, regular tweezers are less narrow most of the time.
these suckers are my go to, are $5 a pair, are insanely strong, yet are so dang narrow that I regularly stab myself to the point of drawing blood while aimlessly twiddling them
https://www.amazon.com/Hakko-3-SA-Non-Magnetic-Microelectronics-Applications/dp/B00FZPEWI6
but yeah, the msafe jack is a series of tiny neodiddlys covered by a thin piece of plastic. but yeaher, if you have five bones to spare and want to expereince the best bang for your buck tweezers money can buy, I can't endorse these guys hard enough. I used to be big on aven which are a budget japanese brand and cost 5X more, yet aren't as well built or rugged. CHP for life
Yes. Quite easily. The relationship is the following
If i have 1lb of force and want to lift something that weighs 4lbs i'll need two pistons right?
piston A with 1lb of force will have a surface area (pi*r^2) of idk, .5sqin.
piston B with 4lbs of load that you want to move will need a surface area 4x higher than piston A. so 2 sqin in this case.
The problem is when you move piston A 2 inches piston B (with the 4lb load) will only move .5 inches.
This scales linearly so if you want to lift a car with 1lb of force you can. but you better be able to move the piston a long long way to get the job done.
EDIT: a kit like this with some tubing will give you everything you need to demonstrate this at home. I don't know the tube diameters but you can measure them and figure out the ratio pretty easily. https://www.amazon.com/Pack-Refilling-Liquids-cigs-juice/dp/B01CFJ51X4/ref=sr_1_5?keywords=syringe&qid=1562950408&s=gateway&sr=8-5
Buy a small syringe kit - amazon.com
1ml Syringe with 18Ga 1.5'' Blunt Needle and Plastic Needle with Matching Cap (Pack of 10) https://www.amazon.com/dp/B01NBSWJ5R/ref=cm_sw_r_cp_api_F-kSBbXSAKQGY
Then buy an empty cart. Ccell is the best.
https://hamiltondevices.com/ccell-0-5ml-glass-cartridge-with-white-ceramic-mouthpiece.html
whaaaat? thats not possible! haha, i have a pair that is really pointy, BUT, they dont "grip" and when i'm trying to pull something out, it just slips right thru... i need a pair that HOLDS! ive gotta find out what kind these are!
EDIT: adding a link - wonder if these would work?! http://www.amazon.com/Marrywindix-Tweezers-Non-magnetic-Forceps-Anti-static/dp/B00DVIEJ14/ref=sr_1_1?ie=UTF8&qid=1454113263&sr=8-1&keywords=precision+tweezer
I have fallen completely in love with pens and their portability/strength. I use one of the 510 batteries from Curaleaf (free on first purchase) and I bought refillable ccell cartridges from here and syringe tips for easy refilling. I am able to control the temperature and length of hit perfectly. The taste is great and I do not experience that awful taste like I did when I used atomizer-based vapes, if that's what you're referring to.
For shatter I will use my Yocan Evolve, when I can get my hands on the stuff...tru shatter sells out right away!
I use these
https://www.amazon.com/dp/B01K1VO3E6/ref=cm_sw_r_cp_apa_DJ-XBbB511XK1
And these
https://vapepenswholesale.com/collections/empty-oil-cartridges/products/black-ceramic-tip-vape-cartridge-glass-tank-ccell
Coupon code: VIPVAPE15
Gets you 15% off
Edit:
Don't waste your money on the Truclear warmer
1ml oral syringes are my go-to for accurate volumetric dosing.
OP the reality is you’re lazy AF or blind as a bat. In either case, if you can’t see the numerous syringe options doing a simple Amazon and/or Google search then you probably shouldn’t be injecting anything into your body.
I and plenty of other posters have purchased regular syringes off of Amazon. You should really use these, it will go real smooth and won’t hurt at all
Link
I’m all seriousness even though you’re coming off as an ungrateful, know it all prick, who won’t search . Here you go your search done for you
23g 1.5
Lost ocean 100pcs Green Color Metal Blunt Tip Dispensing Needle (14G) https://www.amazon.com/dp/B01K1VO3E6/ref=cm_sw_r_cp_api_i_Da2OCb005Q4BQ
all it takes is a bit of simple math. you can buy everything you need aside from the liquid nicotine on amazon. i myself use 100%vg juice so i dont buy pg at all but a large bottle of vg will run you about 20 to 25 dollars, 1 gallon for me is 22 at the moment. you can also find packs of empty bottles for around 10 bucks, then youll need measuring syringes for mixing, flavor drops and the nicotine all of which are linked below.
i would just mix small batches first if you arent sure what a juice would taste like after your done then mix a full bottle, this way you can experiment with flavor mixes and see what you can create.
for a 100 ml bottle its really easy youll just need to figure out how much nic to put in, i vape at 6% nic so i measure out 94 ml of vg and the last remaining 6 ml i put in as the nicotine, after that the base is done, then just drop in the flavor drops, shake it like crazy, let it settle for a bit and boom juice done.
there are also some sites out there with premade mixture recipes that you can find and follow
https://www.amazon.com/gp/product/B007HSDNS4/ref=ox_sc_act_title_1?smid=A3O37MU47F4102&psc=1
https://www.amazon.com/gp/product/B007Y8UX80/ref=ox_sc_act_title_2?smid=A1ZOAQ4ZHE42HG&psc=1
https://www.amazon.com/gp/product/B01CFJ51X4/ref=ox_sc_act_title_3?smid=A35C2NGNUSD9X5&psc=1
https://www.amazon.com/gp/product/B00WUPUYCC/ref=ox_sc_act_title_4?smid=A2S5SG4CMI156J&psc=1
https://liquidnicotinewholesalers.com/250mg-nicotine-liquid.html
Blunt tip 1ml syringe work great for making capsules and measuring. https://www.amazon.com/gp/product/B01NBSWJ5R/
Someone posted what I use but deleted their comment so:
​
Tweezers: https://www.amazon.ca/Hakko-3-SA-Non-Magnetic-Microelectronics-Applications/dp/B00FZPEWI6/
I use a hot air station: https://www.amazon.ca/WEP-858D-Soldering-Station-Suitable/dp/B0055B6NGE/
Pcb Holder: https://www.amazon.ca/Circuit-Holder-Adjustable-Soldering-Repairing/dp/B075DCBR24/
Microscope to find bad joints and loose solder balls: https://www.amazon.ca/Plugable-Microscope-Flexible-Observation-Magnification/dp/B00XNYXQHE/
Solder paste: https://www.digikey.ca/products/en/soldering-desoldering-rework-products/solder/262?FV=ffe00106%2C2dc186b&quantity=0&ColumnSort=-1000009&page=1&pageSize=25&pkeyword=solder+paste
I like these to clean paste or flux https://www.amazon.ca/MG-Chemicals-Tapered-Cotton-Length/dp/B008OA8488/
Conical Tip for small pin fixing https://www.mouser.ca/ProductDetail/578-ETS
Beveled tip for drag soldering if needed https://www.mouser.ca/ProductDetail/577-EW-511
ST-Link-v2 (programmer) https://www.digikey.ca/product-detail/en/stmicroelectronics/ST-LINK-V2/497-10484-ND/2214535
​
What I do is put a glob of paste on a piece of paper and dip the syringe tip lightly to make a smaller glob hang off the tip, then place the small glob from the tip on the pad I'm doing. I know this isn't the right way but its the easiest I've done.
​
When the pieces are in place I set the hot air to 450ish and lower air flow so it doesn't blow pieces off the board. When the solder solidifies most the time everything gets aligned to the pads (capacitors will randomly stick straight up but is fixed by poking it with tweezers)
​
I start with Ic's then check under the microscope for bridges or loose solder balls. then resistors/caps. Double check again for anything wrong and if its good program it with the st-link. Once thats good I put on the pots/buttons/leds
​
For faceplates, I tried at first to 3d print them. Didn't look the best, made it look cheap. So I just order faceplates when I order the pcb's now. They cost a lot but I want them to look nice when done.
Used 14g blunt tips and they worked great, cheap for 100: https://www.amazon.com/gp/product/B01K1VO3E6
If you can unscrew the atomizer on both and the funnel fits, you can pour with a steady hand. You can also use plastic pipettes; they are cheap as chips.
If the atomizers can't be removed I use these syringes and followed that video.
so, first and foremost, we're far more active on /r/RATS. (im basically subbed here to tell people this).
but, im currently going through this with two of my boys. They're both on antibiotics and an anti-inflammatory. What you can do in the mean time though, is take him into the bathroom and run the shower as hot as possible. Just hang out with him and let him breathe in the steamed air. You can dilute some honey in some water and feed that to him. I suggest getting a non-needle syringe. something like this. you can find them at pharmacies. You can use this to feed him water and the honey mixture. Dark chocolate is good too. there's some sort of chemical in that that helps them breathe. I also heard you can give him rosemary but ive never tried that.
The biggest thing that helped was firm tapping with my finger on the side of his body right behind his arm. Dean boggles now when i do this to him and he's not even really sick anymore.
https://www.amazon.com/dp/B00BQLI27U/ref=cm_sw_r_cp_apa_i_IxxyDb333BBGE
This is the one I use, its a 10mL so you can get multiple fills in one go
https://www.amazon.com/dp/B01LM8LTTO/ref=cm_sw_r_cp_apa_i_WxxyDbYC1G3D3
And these are the tips that go into the syringe
This set of [syringes](http://www.BSTEAN.com/ Syringe Blunt Tip Needle and Cap - 10ml, 5ml, 3ml, 1ml Syringes 14ga 16ga 18ga 20ga Blunt Needles - Oil or Glue Applicator (Pack of 10) https://www.amazon.com/dp/B01HFTYINS/ref=cm_sw_r_cp_apa_i_SkBuDb127QQVQ) will change the game for Star San, lactic acid, etc. additions.
Having a set of cheap bar rags has incredible.
I use a cookie cooling rack on the ledge in my keezer for oint glasses so that there's airflow under them and they aren't sitting in condensation.
A 2 cup pyrex measuring cup and small whisk for everything from gelatin additions to dissolving campden additions.
Harbor Freight nitrile mechanics gloves for cleaning when things like PBW or BLC are involved. They're think and don't rip and also have longer wrists than the food service ones.
For flush cutters/snippers (don't need two tools really) get either:
Even the cheapest ESD tweezers are ok for holding components, get a kit that includes angled ones if you're going to do a bunch of SMD.
These are good also: https://www.amazon.com/Hakko-3-SA-Non-Magnetic-Microelectronics-Applications/dp/B00FZPEWI6
These help a ton with the mandalas. Dunno how well they will ice dye either, I'd imagine it will run at least a bit. The ice dye looks cool though, you could always do the center normal and the rest ice. But don't let that discourage you; if you think of a way to pull it off let me know!
Use this: https://www.amazon.com/dp/B06Y2JWDQ3
Blunt syringes like the above will be cleaner, and you'll be able to get every last drop out of the bottle when near the end.
This is definitely the recommended way to do it!
Also a related tip - for more portable dosing you can dissolve it into much smaller volumes (ie 10mg / mL), measure it out precisely with a 1mL/1cc syringe and store it in capped plastic centrifuge tubes.
That makes it easier you can hand out volumetric doses to friends, store them in your pocket for easy consumption later in the day, etc. I find 2c-b is one of the easier psychedelics to handle in social/public/crowded environments and it’s very redoseable, so it’s particularly useful to have a convenient way to take more on the go.
It’s also worth noting that 2c-b is a very hardy compound (like most phenethylamines) - it’s not as necessary to use any special water for it, it’ll stay potent dissolved in regular tap water for years. If you’re doing volumetric measuring with something more delicate like LSD then it’s very important to use water without any chloride, which will degrade it over time.
To add on to OP, a good solution for dosing in smaller tanks:
[Syringes](1ml 1cc Syringe with Luer Slip Tip, No Needle, Non-Sterile (Pack of 50) https://www.amazon.com/dp/B01N01TO2O/ref=cm_sw_r_cp_api_6dnLybHRB4RVD) with blunt tips. They come in a range of sizes, but this one is good for 10gallons especially! I dose around 0.8mL twice a week.
I use these tweezers on my semps. It’s [a little too] satisfying.
Lost ocean 100pcs Green Color Metal Blunt Tip Dispensing Needle (14G)
https://www.amazon.com/dp/B01K1VO3E6/ref=cm_sw_r_cp_api_i_7QjWCbJQ962VT
https://www.amazon.com/Air-Tite-Glass-Syringe-Metal-Clear/dp/B00BQLI27U/
Just did the same thing this week! It’s been working out really well. I recommend getting some blunt tipped needles (I used these Lost ocean 100pcs Green Color Metal Blunt Tip Dispensing Needle (14G) https://www.amazon.com/dp/B01K1VO3E6/ref=cm_sw_r_cp_api_i_tb3VDb0DYTGDJ) that attach to the end for injecting the warmed up oil into the cart to minimize waste.
Unable? Not so my friend! You just need to keep it sorta roomtemp as I understand. I personally keep mine in a fridge, but that's unnecessary I think. I use a small dark glass bottle, that holds 30ml - which I drop a tab into, and then use a blunted syringe to extract 1.5ml–3ml per dose (depending how much I want that day).
Volumetric is a WAY WAY better way of doing it than cutting up tabs. I'm sure if your bedroom is even a remotely normal room temp your little bottle will be just fine in a drawer or something.
The dark glass bottle, and the syringes (science/non medical type) are available on amazon for not too much money.
— Here is the type of bottle I have (these are very very nice, you could probably get away with a cheaper one, but hey, it's nice to have nice things :)
https://www.amazon.com/Infinity-Jars-Travel-Ultraviolet-Screwtop/dp/B00N5FLUYC/ref=sr_1_1?ie=UTF8&qid=1502672177&sr=8-1-spons&keywords=infinity+jar&psc=1
Measurement:
https://www.amazon.com/Duda-Energy-Syringepk010-Industrial-Syringes/dp/B00DXPRTHG/ref=sr_1_1?ie=UTF8&qid=1502672271&sr=8-1&keywords=Duda+Energy+Syringepk010+Industrial+Syringes+with+15G+x+1-1%2F2%22+Blunt+Tip+Fill
Math is easy. If you put a tab say a 100ug tab into 30ml of water, then if you take 3ml of that water, you would be getting 10% of that tab. 5—15% is usually a good amount, and you might find that less works better for you.
The ALD52 I have is 125ug per tab. So 125ug in 30ml of distilled water means that 3ml of solution equals 12.5ug of a dose - and often, I take half of that, so only 1.5ml of soultion.
That oil is very viscous you won’t be pouring it anywhere. (And those carts suck IMO). To answer your question, you need some blunt tipped syringes. I found a variety pack on amazon for less than $10.
I emptied one on these apex and another similar one from theory wellness (again, bad cart) into used mostly empty ones from sage (really good cart). Works fantastic.
To reduce viscosity and make it easier to suck up with the syringe, use a hairdryer on warm to throughly heat the cart and oil.
Edit:: link
Check this out: 9 Pack - 10ml, 3ml, 1ml Syringes with 14Ga and 18Ga Blunt Tip Needl... https://www.amazon.com/dp/B01CFJ51X4/ref=cm_sw_r_sms_awdb_8drXzb76J26XX
There are blunt ones?
Man that would be a lot better than the huge (in needle sizes) needle that I've been using for the past couple of years.
Maybe Amazon has them...
Yep they do, this looks useful, thanks e-cigs: https://www.amazon.com/dp/B072XFYXVB/ref=cm_sw_r_cp_awdb_t1_nydYCbDN7F0BP
For the syringe, is this what I'm looking for?
And for #8, how does one spread the oil super thin onto the parchment? I see this as a step for all purging most all concentrates, but the two times I've made BHO trying to do anything with it was a mess.
Many thanks sir!
I've got some old spore syringes - 10ml. Would they work? This is the product https://www.amazon.com/gp/aw/d/B0161V0024/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
I'd take off the needle, and just put it up thar and inject the water.
I'm considering just sipping the beers... I just want to enhance the trip in any way possible. I've smoked alot in past trips, but I wanna hear some first hand accounts on if anyone has ended a t break while tripping.
I get mine from amazon.
https://www.amazon.com/gp/product/B016Q5YVK2/ - Assorted sizes set (out of stock)
https://www.amazon.com/gp/product/B0187LGYCG/ - 5ml Airless Pumps (about the size of my thumb)
I would LOVE to find a glass airless pump bottle though!
A fill syringe is awesome for decanting. You don't have to touch the product, and don't expose as much to air! I got the kind for glycerin and they work pretty well. The thicker creams are a pain, but you can use a syringe if you have patience.
https://www.amazon.com/gp/product/B01CFJ51X4/
I bought all my materials from Amazon and I've done about 3 Mods.
Heres a little documentation of my 1st one.
Seiko 5 Mod; PAM Cali Dial & Sword Hands & some more photos
Some things that I suggest you get before starting.
Let me know if you've any questions, I'd be willing to help you out and answer them to the best of my ability :)
Cheers!
Use syringes with plastic tubing stuck on them. Just mix it up on a piece of scrap wood or paper plate, pack the syringe, and inject.
You could also use heavy duty freezer bags with a corner cut off... like piping frosting onto a cake.
I'll add a couple things -
Look at the Samigon reels - they have much bigger "ears" (where you slide the film into the reel) and are way easier to load - see if the Patterson has the same size.
I use a syringe with tubing to get developer syrup out of the bottle and into the graduate - makes it easy to be accurate with no spilled drops. That was one of those "Wish I'd thought of this a decade ago..." (I cut the tubing down to like 3" though).
NO on the squeegie...
Funnel, stirrer, can opener ("churchkey") - get those at the grocery store. And look for some kind of basin or tub - you'll need to put ice water or hot water in it to get your dev. to the right temp. Usually it can also be used to store all your developing odds and ends, tank, thermometer, etc. Like, a Rubbermaid tub, a foot square and 8" deep, something along those lines.
I like having a 1 liter, a 300ml and a small (like 100ml) graduate, though the 1L I use more for prints. I have a couple random plastic measuring cups for holding chems, just grocery store items.
YOU FORGOT: PrintFile film sleeves; a good pair of scissors; white cotton gloves; a can of dust-off compressed air spray, all for when you sleeve the negs. A Binder or notebook for notes on developing, recipes, tests, etc. Developing times from the internet or instructions are only a starting point, the best thing about DIY is learning what film and dev combos work for you, and what times and dilutions deliver negs you like and are a breeze to scan or print. "Expose for the shadows, develop for the highlights" is all wasted if you just use the same time for every situation.
Noodler's Ahab. You can use any sort of eyedropper-like tool, but I prefer a blunt-tip syringe, such as this one.
get these, fill one with water and squirt it in a spoon with your drugs. give it a minute to dissolve and apply a little heat if you need to, then let it cool for a sec and suck it into the syringe. now you can snort this directly out of the syringe or use it to boof.
https://www.amazon.com/dp/B01N01TO2O/ref=sspa_dk_detail_0?psc=1&pd_rd_i=B01N01TO2O&pd_rd_wg=nva8v&pd_rd_r=7X6S1CWMT27FD4HS0R54&pd_rd_w=id59C
Blunt Tip Syringe
https://www.amazon.com/Bstean-Syringe-Blunt-Tip-Needle/dp/B01HFTYINS
Well, since I've never tried it, I'm not sure - you can find smaller blunt tips - here's an example:
https://www.amazon.com/dp/B01HFTYINS?psc=1
Look around a little - there's a ton of this kind of stuff.
I have this set: Bstean Syringe with Blunt Tip Needle and Cap - 10ml, 5ml, 3ml, 1ml Syringes and 14ga 16ga 18ga 20ga Blunt Needles - Great for Oil or Glue Applicator (Pack of 10) https://www.amazon.com/dp/B01HFTYINS/ref=cm_sw_r_api_9nZhAbF628E32
I had a similar problem, I ended up just grabbing some of these.
A coffee straw would've been cheaper... but the syringes are handy to measure with from time to time.
For weigh boats I use these, work perfectly. And to round out your weighing arsenal, one of these for smaller loads, and one of these for the larger ones.
https://www.amazon.com/Syringes-Scientific-Measuring-Watering-Refilling/dp/B07C71C1LH You're thinking like this style of syringe? I'm sure there's syringes out there with nozzles that would be just fine for grease.
That being said, is there a budget number you had in mind?
Bent tweezers work really really well. Unless you're trying to take apart already mounted switches, I find tweezers to be the best (something like the top one in the picture on this listing http://www.amazon.com/Non-magnetic-Curved-Tweezers-Forceps-Anti-static/dp/B00DVIEJ14/ref=sr_1_2?s=industrial&ie=UTF8&qid=1409881252&sr=1-2&keywords=tweezers).
I don't have those specific ones though, so I can't comment on the quality of those. Nice reviews though.
http://www.amazon.com/Pack-Syringes-Luer-Fill-Needles/dp/B00DXPQIFU/
I recommend this and these
It’s a set of vials and syringes. I would recommend getting a vial holder as well. That way, you have all the vials in one places and are not as likely to spill. The vials are nice because you can test small batch mixtures. Label the tops of the vials and keep a notebook. Rhodia is good or something else that can show off sheen. This way, you can more down the vial designation, the proportions, the inks used and what the resulting color looks like.
Another thing you would want to learn about is color therapy because a cool yellow mixed with a warm blue will give you a different green than a warm yellow mixed with a cool blue. Rot dye has a great mixing chart that is a wonderful resource for color mixing.
Beyond that, different inks interact and react in sometimes unexpected ways when mixed, which is another reason to have small vials to see what the reactions are and if the ink start to separate or do something else unusual.
Sure.
Agrimectin Ivermectin Injection 50 ml 1 percent https://www.amazon.com/dp/B004FVUH6C/ref=cm_sw_r_cp_apa_i_dy9nDb6JE22EB
You use a very tiny tiny amount. Like literally a couple drops behind each ear, fold the ear over and rub it in.
Google correct dosing. You're going to want an EXACT weight in grams of your pig. Triple check your math before dosing.
I also bought these syringes:
BSTEAN 1ml Syringe with 18Ga 1.5 Inch Blunt Needle and Plastic Needle with Matching Cap (Pack of 10) https://www.amazon.com/dp/B01NBSWJ5R/ref=cm_sw_r_cp_apa_i_ty9nDb24V2BHC
They have dull tips so you can stab into the bottle and get the correct dosage but also use that same syringe to dose your pig as the end of the needle is completely dull and won't hurt them unless you forcibly scrape with them it - but there's no reason to do that. Just be careful.
I bought the world's tiniest damn measuring spoon: https://www.amazon.com/Micro-Scoop-PP-10-15-mg/dp/B0044EOKLI/ref=sr_1_4?ie=UTF8&qid=1523478785&sr=8-4&keywords=mg+spoon.
I fill it halfway or a little under halfway, which is honestly a little harder than it sounds. Definitely considering buying an affordable scale.
It's this syringe. I think the problem may be the needle-like tip so I'll check out the baby syringe.
I use this syringe, but I only always inject half of it.
Look on Amazon they sell them their for decent prices.
Here are the ones I picked up and they have worked great.
(Bstean Syringe Blunt Tip Needle and Cap)[https://www.amazon.com/dp/B01HFTYINS/ref=cm_sw_r_cp_apa_i_uNE3CbDYR36ZN]
I hope I edited the link correctly.
you might want to buy a blunt needle instead. I'm going to buy these:
https://www.amazon.com/Momok-Pack-juice-Liquids-cigs/dp/B072XFYXVB
I found this on Amazon. It's eligible for Prime.
https://www.amazon.com/dp/B06Y2JWDQ3?psc=1
You might also try a local Vape shop. They'll probably have one they might part with.
Glad you asked! One thing we have to remember about Prime is that it does not remove the ammonia, it just renders it harmless. So the result is a "false positive" on standard ammonia tests. It will still be there but it is no longer harming your fish.
If you would like peace-of-mind you can get a Free vs Total Ammonia test kit. This kit allows you to measure the amounts of Free (harmful) ammonia vs. the Total (harmless once Prime is involved).
Even if you aren't going to get some, read the description on Amazon. It is really helpful in understanding Ammonia chemistry.
For measuring ANYTHING for your aquarium, go to your local drugstore pharmacy (Even Walmart pharmacies will do this) and ask them for free syringes. They are absolutely AWESOME for measuring anything that takes very small measurements such as Prime. If for whatever reason you can't get some for free from a drug store, order a set like this. I use the 1ml and 5ml syringes every single day.
Edit: I suck at spelling....
Super important to note that guinea pigs can’t produce vitamin C and need supplements. You can also get liquid vitimin C and small syringes from a vets office or online to give them daily. Mine think it’s a treat!
Examples:
Vitimin C: https://www.amazon.com/dp/B00016RLSC/ref=cm_sw_r_cp_awdb_t1_XgPPDb6004AC1
Syringes: https://www.amazon.com/dp/B01N01TO2O/ref=cm_sw_r_cp_awdb_t1_ziPPDb57CGQPG
The syringes can be rinsed out with water and reused!
I prefer citadel over all. I use the citadel Colour app to help with the color choice and how to apply. I do use Vallejo when I need an air brush version of a color that Citadel doesn’t have or for priming.
I understand the stance you have on the pricing with citadel, but you can make that line of paint last longer.
Head to amazon and order these items
15ml dropper bottles
1ml needless syringe
flow aid
small stainless steel ball baring
By following the steps in this video on YouTube I was able to transfer all my base and layer paints to dropper bottles. Now I can limit how much paint I’m wasting to a minimum. Because like you said, they can be expensive
This thing is exactly what you need:
https://www.amazon.com/Chemglass-CG-1983-12-Spatula-Overall-Nickel-Stainless/dp/B005WX4URE/ref=sr_1_8?ie=UTF8&qid=1482023131&sr=8-8&keywords=scoopula
How about a blunt tip syringe? Also available on Amazon. They're a little more expensive than a plastic pipette, but probably more durable and cooler looking. Might also get you arrested if you decide to transfer aftershaves in a shady looking alley. You can also get a thicker gauge needle from a pharmacy and then blunt it with a wetstone or sandpaper.
Problem 1. It might just be easiest to remove the radiator to drain it.
Problem 2. Use this bracket to mount your pump/res to your radiator. If you flip your rad and mount the pump/res as low as possible (similar to where it is now) it won't block the ports with this mount.
Question 1. This doesn't help you, but some radiators like the Alphacool Nexxxos XT45 360mm come with a port on the bottom of the radiator. I have no idea why their website shows no port in the picture, but mine has one. Their photo of the UT60 has one.
Question 2. Draining a top radiator is no easier. The problem with radiators is in order for the fluid to drain, it needs to make a huge u-turn. Water enters one port, and can't exit the other port unless is travels to the bottom, flows to the other side of the bottom, then flows back up to the top. In my experience, disconnecting tubing from a top mounted radiator requires a lot of paper towels.
Question 3. For difficult to drain sections of my loop, I use one of these 100ml syringes with plastic tubing. I poke the tube into the hole (teehee) and suck the fluid out with the syringe.
Hey dude! I purchased a starter kit when I started making E-juice, and while it was helpful I quickly realized that I could of gotten more for less had I known what I needed. It is a lot cheaper to just buy the products individually since you will also be getting a larger amount too. Here are some links and in my opinion this is the cheapest way for someone to start DIY:
VG- https://www.amazon.com/Glycerin-Vegetable-Kosher-USP-Quart/dp/B004C7MTLA/ref=sr_1_2_a_it?ie=UTF8&qid=1480546689&sr=8-2&keywords=vegetable+glycerine
PG- https://www.amazon.com/Essential-Depot-Propylene-Glycol-Quart/dp/B005F5OJG6/ref=sr_1_3?ie=UTF8&qid=1480546865&sr=8-3&keywords=propylene+glycol
Gloves- https://www.amazon.com/Liberty-Glove-Industrial-Disposable-Thickness/dp/B01MZZ0FHO/ref=sr_1_2?ie=UTF8&qid=1480546913&sr=8-2&keywords=nitrile+gloves
Syringes- https://www.amazon.com/10-Pack-Refilling-E-Liquids-Applicator/dp/B01HFTYINS/ref=sr_1_6?ie=UTF8&qid=1480546884&sr=8-6&keywords=blunt+tip+syringe
Nicotine- https://www.nudenicotine.com/products-page/unflavored-nicotine-base/
And as for bottles it is all up to you I personally buy mine from http://wholesale.heartlandvapes.com/eliquid-bottles/plastic-eliquid-bottles.html
*Lastly all you need is flavorings, I think it would be best for you to search around and find what you like, I personally prefer http://gremlindiy.com/ and http://www.bullcityflavors.com/ . Hope this helped!
I have large syringes that I use to focus water in my arrangements with different succulents in one container and found they also work well when empty to blow dirt and pooled water that could cause blemishes and rot on the leaves away. Here's the ones I ordered from Amazon.
3 Pack 150ml Syringes, Large Plastic Garden Syringe for Scientific Labs, Measuring, Watering, Refilling https://www.amazon.com/dp/B07C71C1LH/ref=cm_sw_r_cp_apa_i_lVAWCb1R5AXFE
2% is NOT high thc....it’s extremely low! I’d also recommend to use a heavy indica strain given what you’ve reported since you’re looking for more calming effects vs. high energy. Your specific condition could be the cause of how you’re not feeling any effects, so it’s probably best to significantly bump up your intake.
Buy distillate syringes ($65 at Surterra) and just make infused coconut oil. Distillate is up to 90% thc and will go a long way....Plus you can truly control your dosages by concentrating them as much as you’d like.
All you have to do is heat up unrefined coconut oil in a Pyrex container, put the distillate into the hot oil and start stirring for a few minutes. Once it emulsifies it’s ready to use. The distillate is very thick, so put the syringe into hot water for a minute So that it becomes less viscous and then remove the cap to dispense it.
Example - let’s say there’s 850mg of thc in one distillate syringe and you use 50ml of coconut oil.
850/50 = 17mg of thc per ml of oil. You aren’t just limited to using one distillate syringe - feel free to use more to make your infused oil more potent.
Buy a blunt tip luer lock syringe with ml measurements and then simply put it into your own empty capsules. You can buy the syringe and the capsules on amazon for very cheap. You can also use these blunt tip syringes to measure your coconut oil to ensure he dosages will be right. Links to the items you need below
https://www.amazon.com/Pack-Refilling-Liquids-cigs-juice/dp/B01CFJ51X4/ref=mp_s_a_1_1_sspa?keywords=blunt+tip+syringe&qid=1554677628&s=gateway&sr=8-1-spons&psc=1
https://www.amazon.com/NOW-Gel-Capsules-250-Empty/dp/B00E40DJ82/ref=mp_s_a_1_7?crid=3VTB07WR7494G&keywords=capsules+00&qid=1554677715&s=gateway&sprefix=capsules&sr=8-7
You can also dispense the distillate straight into your own cartridges and vape it, but be sure to use only a ceramic cartridge. Do not include any coconut oil into your vape...just distillate
Really thin tweezers probably. Maybe drill a thin hole, and screw in a thin screw to pull it out. If you can't you might have to replace the jack.
Edit: Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length https://www.amazon.com/dp/B00FZPEWI6/ref=cm_sw_r_cp_apa_i_-k2SCbAXPW0HV
Here are some thin tweezers lol
Here's one option - the metal tips are a lot more precise than what you find at Hobby Lobby and other craft stores (the plastic tips don't get small enough)
https://www.amazon.com/Purpose-Precision-Applicator-Assortment-Henna/dp/B01IPOJSF0
Oh, this looks even better:
https://www.amazon.com/dp/B01HFTYINS
second on the aptasia, get rid of them. If you don't want to purchase something just to eat them, or they don't get eaten, the hot water method of killing them worked great for me.
Boil some water, take an industrial syringe and suck up some of the water. Blast the aptasia with the water at close range, this should kill it, but will also losen it up a bit. Then reverse suction on the syringe and suck it right out of whatever little hole it's living in. Plenty of youtube videos on it, and a lot cheaper than buying special chemicals.
On the syringe... here is what I have:
https://www.amazon.com/gp/product/B01MQ0IIQK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Blunt tip stops you from stabbing yourself. I recommend you check out YouTube how to videos. Goulet Pens has brilliant, helpful videos.
You have good advice below about the feed and "unknown leak". Don't be sorry for asking. You will learn a butt load if you stick around. :O)
This is the same thing I posted in response to a similar question a while back.
I'd suggest the Hakko FX-888D as it is a cheap temperature controlled station and you'll get better results quicker than with a cheap iron. You certainly can go with a cheaper Weller station but you may end up fighting with it a bit if you move beyond very basic work. For solder, stick with leaded 60/40 or 63/37 as it will flow out easier and at a lower temperature. Don't forget useful things like solder wick/desoldering braid, tweezers, and cutters.
To practice, start collecting old electronics and removing parts. Once the parts are out, put them back in. This will get you comfortable with the techniques without risking something valuable. The other option is to go to eBay and buy cheap kits from China for a few dollars and build them.
Pace has some outstanding soldering videos on YouTube. They are a bit old but are quite well done and still relevant. I'd suggest you start with these then look up the NASA soldering specifications to see the extreme end of things. You won't do much of what is in the NASA spec but it will give you some good background info.
iFixIt has a soldering tutorial (though it has a few bad habits in it).
Mix http://www.amazon.com/gp/aw/d/B01CK32JXU/ref=mp_s_a_1_3?qid=1459371669&sr=8-3&pi=SY200_QL40&keywords=ejmix&dpPl=1&dpID=31s2734ti5L&ref=plSrch
http://www.amazon.com/gp/aw/d/B00AU6Y6C2/ref=mp_s_a_1_1?qid=1459371760&sr=8-1&pi=SX200_QL40&keywords=small+beaker&dpPl=1&dpID=31-J48-oRpL&ref=plSrch beakers for mixing and measuring and cooking
http://www.amazon.com/gp/aw/d/B00DXPRTHG/ref=mp_s_a_1_1?qid=1459371820&sr=8-1&pi=SX200_QL40&keywords=blunt+tip+syringe&dpPl=1&dpID=21SzolFINTL&ref=plSrch syringe to transfer liquid and I use mine to stir the solution while it warms up
https://www.amazon.com/gp/product/B01LWNDPW3/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
something like that but smaller
Right here: http://www.amazon.com/gp/aw/d/B00DXPRTHG
I love these things. Perfect for dosing. Could have used less than 10 but I'm glad I got them. I Velcro them to their respective bottles.
You should feel subtle effects like improved mood, less anxious, more energy, might have slight enhanced interest in colors, music sounds better. If you see any traces, distortion or waviness in your vision you're taking too much for a microdose.
Me personally, I can feel .05g, I prefer .1 or .2g, if I take .3g I can see tracers of my finger tips as I move them across a dark background in a dim room. But that effect only lasts for less than 30 minutes, that's my upper limit for a microdose.
I got one of these to use when filling my capsules, works great!
https://www.amazon.com/gp/product/B005WX4URE/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
I bought these and they work pretty well for injecting dielectric grease into the hole in the stab that the wire goes in
https://www.amazon.com/gp/product/B01HFTYINS?psc=1
There's a great guide to racetams here https://www.reddit.com/r/StackAdvice/comments/4g6p0i/racetams_and_you_a_guide_of_the_popular_racetam/
If you decide to go with powders (which is more cost-effective in the long run) make SURE you get a good scale to measure everything out. I went with this onehttps://www.amazon.com/gp/product/B0012TDNAM/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
and this to measure everything out https://www.amazon.com/gp/product/B005WX4URE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I bought my files, drill, tweezers and dykes off of Amazon and they all together set me back less then $50
each thing was 10-15
http://amzn.com/B00E8ER10G
http://amzn.com/B000OVHZ3U
http://amzn.com/B00DVIEJ14
http://amzn.com/B001N1AASC
not at all
Subtotal (5 items): $46.23
and you lget mor than you'll ever need.
you can optimize it by picking smaller pack but just to give you an idea what you are in for.
get some wide mouth bottles with a scale.
edit:
oh and get a funnel for the 30ml bottles!!!
to measure your flavours
https://www.amazon.com/Pack-Refilling-Measuring-E-Liquids-Adhesives/dp/B01CFJ51X4/ref=sr_1_1?ie=UTF8&qid=1485157215&sr=8-1&keywords=syringe+set
bottle to carry your juice with you more than enough i bought ten and thats more than needed
https://www.amazon.com/Vktech-Plastic-Dropping-Bottles-30ml/dp/B00F098JJA/ref=sr_1_1_a_it?ie=UTF8&qid=1485157332&sr=8-1&keywords=30ml+bottles
for when you are to lazy to shake
https://www.amazon.com/MatchaDNA-Handheld-Milk-Frother-Silver/dp/B018TCWL8O/ref=sr_1_4?s=kitchen&ie=UTF8&qid=1485157363&sr=1-4&keywords=milk+foamer
storrage for your juices
https://www.amazon.com/Plastic-Mouth-Experiment-Bottle-Capacity/dp/B016CLEU1U/ref=sr_1_1?s=industrial&ie=UTF8&qid=1485157538&sr=1-1&keywords=bottles+100ml
storage for you base
https://www.amazon.com/Lautechco-1000ml-Plastic-Experiment-Reagent/dp/B01MEGYZGA/ref=sr_1_20?ie=UTF8&qid=1485158603&sr=8-20&keywords=1000ml+wide+mouth
for the future, try using a syringe.
Dont have a link to the individual one i have because i picked it up at my local brick and mortar for about 3-4$. But THIS kit looks like more than enough for ~9$ on amazon. If you poke around a bit more im sure you could find an individual one.
I've seen smaller
https://www.amazon.com/Micro-Scoop-PP-10-15-mg/dp/B0044EOKLI
It depends on what you want to take. The dosages on here range from 2.5,5 to 10, 10 being the most. People seem to swear by the 2.5-5 range but I personally like 10. Maybe try 5 your first go around.
So here’s how I would do it
Get PG solution bundle from the source below, it has the solution and dropper bottles.
https://whitewaterresearch.com
And get a beaker from amazon, this is what I have
Karter Scientific 214T2, 3.3 Boro, Griffin Low Form, Glass Beaker Set - 3 Sizes - 50ml, 100ml, 250ml https://www.amazon.com/dp/B01F47B8AO/ref=cm_sw_r_cp_api_i_ZCUyDb3YNPV8V
I would personally make a 50 ml solution.
Take the 50 ml beaker, fill up to 50ml line, dump in powder, mix (it may need to sit), poor into bottles and you’re done.
With that ratio of 50ml to your 1mg of powder you are looking at 20mg per ml (one dropper full)
So then you just math what you want. If you want to take 10mg then it’s half the dropper, if you want to take 5mg then it’s 1/4 the dropper.
If you want to be super precise with your dosing you can get one of these
BSTEAN 1ml 1cc Syringe with Luer Slip Tip, No Needle, Non-Sterile (Pack of 50) https://www.amazon.com/dp/B01N01TO2O/ref=cm_sw_r_cp_api_i_OGUyDb8DK6M6F
I personally like these because it does make it precise and the pipettes that come with the bottles tend to be shit.
Superglue doesn't work very well. Loctite 404 is the best I've found of the cyanoacrylates, but it tops out at "okay," unless you're willing to put in a lot of surface prep.
ABS glue works great, though it can be a pain to use. You want to make your own: get some acetone and some ABS. Undyed pellets are best, like this: https://www.amazon.com/IC3D-Printer-Plastic-Pellets-Natural/dp/B00MG5PF5M/ , though you should be able to find cheaper. Put some pellets in a small jar, and add acetone. You're probably looking to end up around 2 parts acetone to 1 part pellets by volume, but you can adjust it pretty far either way. Mix them together through a combination of stirring and shaking. This will take a while, and you'll probably need to let them soak periodically. They won't dissolve all the way without mixing, and they wont mix without soaking, so it's just going to take a while. Eventually though, you'll have a good that you can brush or squirt onto PLA to make it stick together. I mostly use mine with an industrial syringe, with a pin in the needle to keep a channel open. It's easy to dispense, and fairly convenient. For large applications or for painting onto a bed, I use acid brushes.
https://www.amazon.com/gp/product/B00NEUC8SK/
https://www.amazon.com/gp/product/B00DXPRTHG/
You can also weld pieces together with a dremel. This is a very good join for large pieces, especially with straight seams, but can be rough for detail work. There's a description here: http://www.scorchworks.com/Blog/friction-welding-with-a-dremel-rotary-tool/
Maybe a E-cig store. amazon hopefully linking isn’t against the rules.
Depends on where you live. I buy mine on Amazon.
You need to buy something with a cap.
Don't use the metal needle to suck up the distillate, it is too thick and won't work. Just use the open tip and clean it off when done.
https://www.kushbottles.com/packaging-concentrate-syringes
https://www.amazon.com/Pack-Cartridges-Liquids-cigs-juice/dp/B0161V0024
https://www.amazon.com/dp/B073ZB3X8S/ref=sspa_dk_detail_6?psc=1
look on amazon, between the item description and the "questions ask/answered" section regarding the product, i have seen some where this information is provided. 0.1ml is the amount delivered from one i saw i believe.
-
I recommend this one... it's 30ml but EASILY fits into your pocket.
-
the glass one here is much better then the plastic one from the same company, and i'm relatively sure it delivers 0.1ml per squirt
-
To make sure, simply fill it with an amount of water measured using an oral syringe (available for free at almost all pharmacys, just ask the pharmacist, say that your little brother got some medicine that requires one for measurement and needs it... though i prefer ones with a long blunt tip, available on amazon as well [here's the 10ml ones i often use and love] (https://www.amazon.com/Duda-Energy-Syringepk010-Industrial-Syringes/dp/B00DXPRTHG/ref=nav_ya_signin?ie=UTF8&qid=1467798872&sr=8-2&keywords=10+ml+blunt+tip+syringe&)
-
and [here's some 1ml ones] (https://www.amazon.com/Duda-Energy-Syringepk001-Industrial-Syringes/dp/B00NDETMR2/ref=sr_1_1?ie=UTF8&qid=1467798956&sr=8-1&keywords=1ml+blunt+tip+syringe) that i got but haven't tried yet, they reviewed well though
BSTEAN Syringe Blunt Tip Needle... https://www.amazon.com/dp/B01HFTYINS?ref=ppx_pop_mob_ap_share
this is what i bought brother
Unfortunately your only option is to get a rail from a used Joy-Con. Replacement rails aren't even available in the Chinese market yet as I'm told.
Though that bent pin looks fixable. As long as you can straighten it and then pull it outward to match the other pins, it should make contact at least a little bit. I'd use precision tweezers for that.
Cheap scale that does the job.http://www.amazon.com/American-Weigh-GEMINI-20-Portable-MilliGram/dp/B0012TDNAM
Buy 00 capsules-easier to pack.
http://www.amazon.com/Now-Foods-Veg-Capsules-Capsules-250-Count/dp/B000OSQS4U
And then get a spatula if you need one to pack and so your hands don't get sticky.
http://www.amazon.com/Heathrow-Scientific-HD15909-Spatula-Overall/dp/B0061OT1A4
I bought Duda Energy Syringepk010 Industrial Syringes with 15G x 1-1/2" Blunt Tip Fill Needle and Plastic Cover, 10 mL (Pack of 10) https://www.amazon.ca/dp/B00DXPRTHG/ref=cm_sw_r_cp_api_SyBEzbN1K6M1M off amazon for 15$.
Might be able to find cheaper for a single. But I wanted some extras.
Jenny WTF!?! BLUNTS! You want blunts! And by that I mean these blunts This way you won't stab yourself, accidentally tattoo yourself, and it's probably not going to take as long to get through customs if you can't find the equivalent on canada's amazon.
Is it strictly necessary to utilize a noodle press to achieve your desired end result? I've done TG noodles before, but simply sealed the farce in bags and pressed it flat before slicing into noodles by hand after cooking. The end result is a flat noodle, akin to fettuccine, and works well in my experience.
An alternative that I've played with when doing agar gels for a different dish is to use a syringe, such as this, to extrude a single noodle at a time into your water bath, if following the same technique as Dufresne.
Without knowing the parameters of your design assessment, I cannot state for certain, but I suspect that a syringe of the above sort could easily serve as a foundation onto which you could attach your own extruding die using a food-safe epoxy.
This is the easiest method.
https://www.amazon.com/dp/B0044EOKLI/_encoding=UTF8?coliid=I1QTG85CZRU0XE&colid=BDTRS2VKHO9J
I'll hook up bro!
Use ecig express to order Flavor Concentrates and bottles
— Use ELRECIPIES for 10% discount
Use The Flavor Apprentice/The Perfume Apprentice for Flavor concentrates
— Be sure that they are made for ecigs
— Better than ecig for bulk orders
Buy vegetable glycerin, and syringes from amazon
— Buy a gallon for bulk
— Buy 10ml, and 1ml syringes
— Buy Tupperware or something to contain 16 oz of liquid to steep ejuice
Buy nicotine from Nude Nicotine
—Purchase “Smooth” Nicotine salts
https://www.amazon.com/Duda-Energy-Syringepk001-Industrial-Syringes/dp/B00NDETMR2/ref=pd_lutyp_bia_3_4?_encoding=UTF8&pd_rd_i=B00NDETMR2&pd_rd_r=S32X53GMX38H2DP662TC&pd_rd_w=NhTrE&pd_rd_wg=Rt1HG&pf_rd_i=desktop-typ-carousels&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=2798022962&pf_rd_r=S32X53GMX38H2DP662TC&pf_rd_s=desktop-typ-carousels&pf_rd_t=40701&psc=1&refRID=S32X53GMX38H2DP662TC
https://www.amazon.com/Duda-Energy-Syringepk010-Industrial-Syringes/dp/B00DXPRTHG/ref=pd_sim_328_5?_encoding=UTF8&pd_rd_i=B00DXPRTHG&pd_rd_r=G7GP5J47E1CRQPHET2VD&pd_rd_w=yULCb&pd_rd_wg=yRWOy&psc=1&refRID=G7GP5J47E1CRQPHET2VD
https://www.amazon.com/gp/product/B00PSGWHIO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.ecigexpress.com
http://shop.perfumersapprentice.com
https://www.nudenicotine.com/product/nicotine-salts-smooth/
Try a blunt-tipped syringe
3 Pack 150ml Syringes, Large... https://www.amazon.com/dp/B07C71C1LH?ref=ppx_pop_mob_ap_share
I bought a 3 pack. One for dirty fluid. One for clean fluid. And a spare
blunt tip needles are cheap and safer.
https://www.amazon.com/Pack-Refilling-Liquids-cigs-juice/dp/B01CFJ51X4?ref_=bl_dp_s_web_13895365011
edit: c & p fail
Here's a 10 pack of 18 Gauge blunt tipped syringes for $8, Amazon primed to your door. Most vape shops will also carry them, probably for cheaper.
Know how that goes, tip for ya next time (three cats here, all have needed pills at one point or another, one of them has lung nodules and needed medication for a year two pills twice a day).
Short answer, dissolve the pills in a bit of water and then use a needless syringe to squirt into back of throat. I actually think it's easier on the cat and the human vs the method shown in the image. It's also handy if you need to split tiny pills into say quarters. Dissolve pill in 4 mL of water and then just give 1mL dosage. Make sure to ask your vet if that method is OK for the pills before doing.
Things you'll need:
Crush the pill in mortar & pestle. Dump powder into syringe tube. Fill with water and shake. Squirt into back of kitties mouth and done.
Also, this is assuming there isn't a liquid version of the medicine. I always ask the vet.
If you are just packing the capsules full of powder, you can use a capsule filling machine. I recommend the capsule machine as I've used it to pack powdered shrooms into size 00 capsule (0.5g in each).
If you are working in smaller quantities then you'll have to fill each capsule individually with a spatula. It is time consuming, but there's something tranquil about the process. I'd put some weigh paper onto your scale and add powder with the spatula to the desired weight. Fold a crease into the weigh paper beforehand so you can use the paper to slowly drop the powder into the capsule. Repeat.
I filled about 13 size 5 capsules using creased weigh paper. The capsule machine can also help with smaller quantities by holding your capsules and minimizing spillage (put some tape over the nearby holes). Unfortunately, there are no affordable size 5 capsule machines so I had to hold them very carefully.
This is my obligatory post telling you try out tweezers:
http://www.amazon.com/Non-magnetic-Curved-Tweezers-Forceps-Anti-static/dp/B00DVIEJ14/
My producitivity almost trippled on making beadsprites, and my accuracy went way up, once I got precision tweezers. Well worth the $4 price tag.
Your sprites looks great by the way!
Looking at these right now. The BPC is being used for an intestinal issue so won't be sub-q. Think these are good enough for just reconstituting the BPC, then drawing for putting each dose into an enteric coated capsule?
10ml Industrial Syringe with 18 x 1.5 Blunt Tip Needle Protective Cap included 5 PACK https://www.amazon.com/dp/B01M2CC95H/ref=cm_sw_r_sms_c_api_FONczb3PTDQA5
Or this
BSTEAN 5 ml Syringes with 18Ga 1.5 Inch Blunt Tip Needle and Storage Caps, (Pack of 10) https://www.amazon.com/dp/B01MQ0IIQK/ref=cm_sw_r_sms_c_api_mTNczb748RR6S
Thanks for being so patient and informative about all this!
I got these just the other day. I diddn't need ten but you get them for less than a dollar a piece. I dont have a saltwater tank so im not sure what you are looking for, I use these for measuring and dosing fertilizers
yep
I also use one for water testing so I can suck exactly 5ml of water out of a tank for the lil test tube without contaminating the sample by sticking my hands in there.
Would something like this work? I looked on Ebay but I'm not too familiar with these things. I know I'll need a very thin one to be able to fit in the small hole to suck out the liquid.
https://www.amazon.com/ITEMporia-Syringes-Needles-Liquids-juice/dp/B01LWNDPW3/ref=cm_wl_huc_item
You can buy them on amazon. The needles are changeable luer-lock style that you can buy cheap as fuck. I used to have one and they are kinda neat for sitting at home, but are not very practical. They are big, heavy, and they don't make tiny little luer lock needles like I prefer.
Drill a hole in the base of the nose cone next to the attachment point and drizzle in epoxy to whatever weight you need. For bonus points, use a hobby syringe and your hole can be tiny (~1mm).
Sounds good, per your persuasion, I've decided to get some Krytox 205/105(or104) and mix 60/40.
I plan to just mix them in a small vial and I guess I can use any syringe like this and use it to apply to my switches?
Ha, right? I always feel awkward ordering syringes/needles, but in reality the gauge you need to pull oil is far to large to easily fit under skin...but try explaining that one without a side look. I buy type 2 fill needles (http://www.amazon.com/Industrial-Syringes-Blunt-Needle-plastic/dp/B00DXPRTHG/ref=pd_sim_0_2?ie=UTF8&dpID=21SzolFINTL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1W5Y0DNPKFJYV3SEHG0Z)
I got these: tweezer set
I wanted non magnetic as it's a pain to pull any magnetic debris out of a motors magnets otherwise :)
You can also drill a tiny hole to the middle of the crack and use a blunt tip syringe (like the ones for shots but not sharp) to apply glue or epoxy.
Then remove the bolt in the joint and cut a spline slot with a circular saw in the direction in which the forces occur. Glue in a hardwood spline. replace bolt.
mix and match get new flavors have fun with it but if you want to empty it easily buy somthing like this https://www.amazon.com/Duda-Energy-Syringepk003-Industrial-Syringes/dp/B00DXPQIFU to pull it out of the tank and then pour your new stuff in
Look into paced bottle feeding. ALL fake nipples have too fast a flow for babies b/c the milk comes out whether baby is actively sucking or not. Video example.
I have had my kids on bottles at different points in their development and I also exclusively breastfed. My first was doing bottles from the first day in the hospital...but it caused a lot of issues with my supply and baby's latch. We had problems for 6 full weeks...that slowed significantly with her age, but eventually I gave up pumping by 5.5 months, and breastfeeding at about 10/11 months. My mom gave her milk with a spoon b/c she struggled with a bottle.
My second...This time I waited until "milk supply was established" as was recommended at the time...around 3ish weeks maybe? She took bottles pretty well and then one day just stopped. And it happened to be the day I was hours from home. My husband kept texting that she didn't want the bottle and I was like, "She'll get hungry enough eventually..." and she never did. When I got home she' hadn't eaten at all for 6-8 hours except for the drops my husband got in when she was sleeping...he squirted it into her mouth. I didn't realize the extent of the "not eating" bit...or I would have told him to use a spoon or something. From about 4 months on...she did not take a bottle.
My third...When she was about 6 months I tried to give her a bottle. She drank it while staring at me (I was across the room) the whole time. When it was empty she took it from my husband and chucked it. She even yelled. And that was the last bottle she ever took. Luckily, b/c of her age, I could give a cup occasionally, but I wasn't working and only pumped occasionally to relieve pressure if she missed a feed or something.
IF bottles are not working at all you can try other methods: A soft sided cup or specialty cup. A large syringe. Or even just a small spoon. Yes. All of these methods will take longer than a bottle. But if the goal is to feed baby pumped milk - then they will meet that goal.
Right before I graduated from college I was getting into soldering and decided once I got my diplomas I would treat myself to some nice HAKKO equipment using the 30% discount while I was still considered a student. The stuff below is what I purchased. Note that the 30% discount is only applied to the soldering station nothing else. Anyway, if you can splurge, I highly recommend the FX-951-66. It is truly fucking AWESOME. If you are on a tight budget and not sure if soldering as a hobby will stick, get the cheapest HAKKO they sell and it will still be a good unit. I am a huge fan of hakko so clearly I am biased but they are a well-known reputable brand
Hakko Soldering Station, FX-951-66
Hakko T15-JS02 Conical Bent Tip R0.2 / 30deg x 1.6 x 7.9mm for FX-951
Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4" Length
Hakko CHP-170 Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity
Helpful info on the best water to use.
I use cold tap water. I also filter through a micron filter into 10ml amber glass resealable vials. I make my own bacteriostatic water by doing cold tap water with .09% benzyl alcohol. This ends up being 9.1ml of water and .09ml of benzyl alcohol. The benzyl alcohol I get comes in a 50ml resealable sterile bottle.
Here's a link to the 27 gauge 1.25" 3cc sterile needles I get. It comes as one unit with the needle already attached to the syringe. I get my vials, benzyl alcohol, needles, and alcohol wipes from medlabsupply. They have way cheaper pricing and everything you need is on there. Just make sure to get everything you need all at once to avoid paying too much for shipping. I use these 10ml syringes for making the actual solution. You can reuse these as long as you use a fresh micron filter as it will filter any potential bacteria.
You should really research how to do IM injections to avoid getting any abscesses/infections as you can lose a limb. IM is much less forgiving than IV as it's very easy for bacteria to spread in muscle tissue so infection needs to be taken much more seriously. You should be using a fresh needle every time, using alcohol wipes to wipe the top of your bottle of solution if you're using a premade solution, and wiping your injection site before you shoot it every single time.
I'd suggest making solutions since using a micron filter is much safer than a cotton ball. It makes it easier since you can just filter your entire solution at once and use only a single wheel/micron filter for one or two solutions (assuming your doing 10ml solutions). Then your whole vial is filtered and sterile and you don't have to worry about it until you go through the whole vial (1 gram of k per 10ml vial).
As far as injection sites the thigh is definitely the easiest and most forgiving. I'd say glutes are second. I just alternate between each thigh muscle personally. If I did it more often I'd do each thigh muscle and then one or both glutes (choose the one on the same side as your dominant hand if just doing one).
Here's a link that shows your how to find the site properly. Here's another one showing injection sites, how to find them, and how to do IM injections safely. This one is a good video for finding the injection for glutes and where your sciatic nerve is. Even after you know how to find the sites you should still look up images of the nerves that run through the given muscle you plan on injecting into. That way you can know exactly what you're avoiding and it'll will prevent accidentally hitting one.
Examples of the smooth flavors?
I have these, I'll get some more, but are 18ga good enough?
Thanks for the advice, the smallest that site sells are 10ml but if you prefer somewhere else let me know as well.
After reading thru this site, here is my shopping list:
Going for a 70pg/30vg blend, just need to track down a good e-juice calculator from the sidebar.
I bought these syringe tips and they've been working well. https://www.amazon.com/gp/product/B01K1VO3E6/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
If you find that the capsules are helpful, you may want to look into making your own using the syringe distillates; you'll end up saving quite a bit of money (my last batch of 10mg capsules came out to just over $20.00 USD per 30 capsules). In addition to the cost savings, you can make the capsules in any dosage that you want.
I use coconut oil as the base and sunflower lecithin to help the body process the cannabinoids. The amounts to use vary by how many capsules you want to make, the size of the capsules, the potency that you want each capsule to be, and how much actual THC and/or CBD is in the syringe. My only golden rule is to use ~ 0.065 ml of Lecithin for every 1.0 ml of oil in my batch.
I mix the coconut oil and lecithin together in a 100ml flask using a glass stirring rod, using a heat gun to warm up the oil (I go by feel, but I'm guessing that the oil gets to ~ 140-160° F). Once they're thoroughly blended together, I add the syringe of distillate and do the same. I'll hit the flask several times with the heat gun as I'm stirring, just to keep the oil warm.
Once completely blended, I use a syringe to fill the capsules:
http://farm2.staticflickr.com/1955/44846477352_a208669881_o.jpg
Here's the equipment that I use:
As an example, to make 10mg Size-0 CBD capsules from a 1ml distillate syringe containing 833mg of CBD and 67mg of THC, here are the numbers that I'd use:
Yield: 83 capsules (10mg CBD & 0.8mg THC)
​
https://amzn.to/2RkC7De something like this is what I have
Hello, do not mix distillate with pg/vg. It will precipitate out. People say you can vape pure distillate in ceramic carts/pods but it might be slow to get started because it's so thick. What you want to do is get some flavorless terpenes to thin out the distillate.
This is what I see recommended a bunch but there are others: https://buy-terpenes.com/products/viscosity/viscosity-extract-liquifier/
I'm in the same boat as you so this is my process:
I bought a small beaker:
https://www.amazon.com/gp/product/B003TVF9WQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
and some blunt-tip syringes:
https://www.amazon.com/gp/product/B06Y2JWDQ3/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I'm going to place the distillate in the beaker and microwave for 10 seconds.
Add 4 drops of Viscosity and stir well with the tip of a syringe.
Repeat, if needed, until a decent consistency, then transfer to the pod using the syringe.
*don't let the distillate get too hot as the terpenes and CBD will start to vaporize/evaporate past a certain temp.
​
Ideally you'd want to use a hot plate with a magnetic stirrer, but those are a bit expensive if you're not running a commercial operation.
​
​
https://www.amazon.com/gp/aw/d/B0044EOKLI/ref=yo_ii_img?ie=UTF8&psc=1
I suggest purchasing this micro-scoop; measures either 10-15mg depending on the side you choose to use!
I got then on amazon for about $10. Here is the link:
http://www.amazon.com/gp/aw/d/B00DXPRTHG/ref=mp_s_a_1_6?qid=1421263500&sr=8-6&pi=AC_SX110_SY165_QL70
I use aiptasia-x and they work for me.
but if you do opt for the syringe method, i recommend this
Take the rubber stoppers out. Turn it upside down and hit it with a hairdryer until the oil pools. Take a blunt tipped syringe and suck it out. https://www.amazon.com/gp/product/B01NBSWJ5R/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Thanks for the cool tek! That sounds like its a worth a shot.
I have some of these syringes on their way to my house. :)
In that case, the syringe is pretty handy to have. I got this variety pack from Amazon < link > so I could try different sizes, and the 1ml (smallest one) ended up working the best for me to load the B-coil.
Well... the last time that I bought cheap black Chinese ESD-safe tweezers, I received a large smelly white Chinese bathroom rug so YMMV.
2nd link is just a cap... You can use a push on needle tip works fine. The first link will "lock" the needle onto syringe but not 100% necessary... If you get something like this https://www.amazon.com/gp/aw/d/B01K1VO3E6/ref=pd_aw_fbt_328_img_2?ie=UTF8&amp;psc=1&amp;refRID=CTE7TVHA387F1V8PPMNE sorry i don't know how to do link how you did...
You can just push it on the syringe really hard and warm up the syringe with a couple passes from a lighter... It comes out pretty easy once warm.. Warm the carts to so oil flows to bottom easily...
My Vision II spinner has 4 settings 3.3V 3.8V 4.3V 4.8V.
I got 10ml syrynges and 3ml syrynges each for around $8, 120ml of 12mg base for $6.39, strawberry ripe and vanilla bean ice cream both for $3.95 and from TFA.
http://www.amazon.com/turtle-icon-Oval-Sticker-CafePress/dp/B009UBWRME/ref=sr_1_10?ie=UTF8&amp;qid=1398448318&amp;sr=8-10&amp;keywords=turtle+sex
http://www.amazon.com/Secure-Instant-Cosmetic-Novelty-Teeth-One/dp/B002GUIDEM/ref=sr_1_2?ie=UTF8&amp;qid=1398448581&amp;sr=8-2&amp;keywords=teeth
http://www.amazon.com/Pack-Syringes-Blunt-Fill-Needles/dp/B00DXPRTHG/ref=sr_1_8?ie=UTF8&amp;qid=1398448611&amp;sr=8-8&amp;keywords=syringes
http://www.amazon.com/dp/B00H5AAYHM/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&amp;colid=3D43YIIQXSL5V&amp;coliid=I2HWPJNVFO4RK8&amp;psc=1
^ that last one is the one I actually want, although the syringes may come in handy sometime ;)