Best leathercraft accessories according to redditors

We found 146 Reddit comments discussing the best leathercraft accessories. We ranked the 98 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Leathercraft Accessories:

u/raineykatz · 27 pointsr/whatisthisthing

Those look like snaps. You'll need a snap tool to apply them or a set like the one below.

https://www.amazon.com/Leathercraft-Punch-Setter-Install-Button/dp/B01ILTJ65G

u/OrigamiSamurai · 6 pointsr/sewing

We used snap fasteners in 12.5 mm antique brass. We added two extra layers of black fabric in the collar so they'd have something sturdy to support them. We didn't have the snap fastener tool so we picked up this set.

For the comm badge we just got an iron-on patch from Amazon. Looks like the ones we used are unavailable but just look for the Next Generation style ones that are roughly two and a half inches or so.

u/Blackeye30 · 4 pointsr/Leathercraft

Here's my starting out basics list:

Must have:

A cutting mat - I have this Cutting Mat which has both standard and metric measurements, very handy for watch straps which are in mm

Ruler - Something like this you probably want cork-backed metal for non-slip and to protect the leather surface, size is up to you

Cutting Tool - I recommend both a very sharp knife like a Stanley utility knife which you probably already own, plus a Rotary Cutter - way more useful than you realize. This is a deep rabbit hole, there are a huge selection of fantastic cutting tools out there, I would say if you get serious this should be an early upgrade but for getting started, a rotary + detail knife is a good start

Wing Divider - Marking patterns, stitch lines, a million other uses, something like this

Fastening - if you're stitching, you need waxed thread and blunt tip needles, as well as an awl (this is one tool that is not worth cheaping out on, get a Barry King and be done with it) and a set of pricking irons, generally a 6-prong (or so) for long straight runs, and a 2-prong for corners. I'm not recommending a specific brand here because the price range is large, and I think there are a lot of newer players making good quality products. I started with Seiwa chisels and they served me well until I upgraded to Muxi Irons, will probably go KS blade punch at some point.

Alternately you can use rivets and a rivet setter (make sure the sizes match); either way you'll want contact cement as well, barge or weldwood are good choices from any hardware store

Helpful items:

Wax paper - you can use it to get nice straight lines with your contact cement

Stitching Pony - I did without one for the first few months but it's a lifesaver, this would be an early priority if you're stitching things

Thread nippers - cheap and convenient These

Skife/Skiver/Skiving knife - Used to thin the edges of pieces and reduce bulk/combine more seamlessly This or This

Isopropyl alcohol - used for cleaning surfaces and diluting dye, if you choose to dye your pieces

Other stuff:

Edges - Edge finishing is whole art in itself, there are different techniques depending on preference and the type of leather used, and accordingly will require different tools. If you're going for the rustic look, you can leave your edges unfinished. Where I live in Portland, lots of people actually prefer that look, but to each their own. Veg tan is most often finished by burnishing the edges, with involves sanding until completely smooth, then wetting with water or gum tragacanth, and rubbing briskly with something smooth, generally a wood burnisher, followed by some wax and another burnish with something like canvas to seal the edge. Chrome tanned leather is generally finished with edge paint or by rolling the edge over so there is no exposed edge.

Dying - If you're using fiebings, MAKE SURE you get the "professional oil dye" line, the standard line bleeds color like crazy. It's an alcohol-based dye so you can dilute with isopropyl/rubbing alc and you can also combine colors without issue to create your own. Two coats gives a nice deep color, and once it's dry buff it with a dry cotton rag to get off any excess. I use pieces of 2" foam to apply it, those tiny daubers don't do much for larger pieces. Also get some nitrile gloves, you'll thank me later.

Beyond that, you start getting into lots and lots of specialty tools, which you'll be able to identify when you get there for specific application. But hopefully this helps and gives you a basic rundown.

u/rookless · 3 pointsr/functionalprint

Printed in Orange PLA. Uses a Tandy 1240-24 belt clip for gun holsters. Really sturdy. Super happy with the results. I use this to clip my keys to the inside of my pocket which keeps them from bunching up and leave room for other items.

Edit: Sorry for the delay, files are up on grabcad.

Fob: https://grabcad.com/library/nissan-keyfob-belt-clip-1

Belt Clip: https://www.amazon.com/Tandy-Leather-Spring-Holster-1240-24/dp/B0035QW56S/ref=sr_1_1?ie=UTF8&qid=1512148499&sr=8-1&keywords=tandy+belt+clip

Chicago Screws: https://www.amazon.com/Tandy-Leather-Screw-Black-1296-04/dp/B004KFBLV8/ref=sr_1_4?s=arts-crafts&ie=UTF8&qid=1512148549&sr=1-4&keywords=1%2F8+chicago+screws

u/What_Dennis_Does · 3 pointsr/Leathercraft

I'd recommend an edge beveler. It's one of my most-used tools - http://www.amazon.com/Tandy-Leather-Factory-Edge-Beveler/dp/B001QT4XA2/

I'll also recommend the Tandy Safety Skiver like others have said. - http://www.amazon.com/Tandy-Safety-3001-00-Replacement-3002-00/dp/B00IVS667Y/

Edit: You might think about finishing supplies you will want as well. Dye, neatsfoot oil, and I also like the Aussie Leather Conditioner. If you will be dyeing, spend good money on lambswool applicators, they are worth the money. I recommend the standard Fiebing's alcohol based dye over all others.

u/wonko221 · 2 pointsr/Leathercraft

I use a leather strap cutter. Inexpensive, and easy to use to get consistent straps.

You can find an example on Amazon at: https://www.amazon.com/Leather-Cutter-Adjustable-Cutting-Screwdriver/dp/B07Q8JHNWY

I got mine fairly inexpensive at a local Tandy shop.

u/idlestitcher · 2 pointsr/Leathercraft

Way, WAY below your budget but I got one of these plus a strop and it’s my best purchase yet next to my KS Blade pricking irons

u/LinearFluid · 2 pointsr/Leathercraft

I actually prefer the Heavy Duty ones from Ohiotravelbag.com They also come sized instead of one size fits all.

This is the Baby one:

https://ohiotravelbag.com/T-1384/Baby+Cap+Jiffy+Rivet+Tool

Go to website and search "jiffy rivet tool" to see all the sizes.

Also get a Rivet anvil too to do double sided caps.

https://ohiotravelbag.com/T-1607/Eyelet+%26+Rivet+Anvil

I don't like the kits where you can do different ones by buying one kit. The Ohio Travel Bag setters are pretty heavy and easy to hold makes setting rivets smooth. I wish I was at my office and could take a picture of the good ones along side a cheap Tandy one. The good one is the circumference of a finger where the others are the crcumference of a pencil.

Like this one:

https://www.amazon.com/Tandy-Leather-Factory-Rivet-Setter/dp/B00N7SSICO/ref=asc_df_B00N7SSICO/

u/SunwolfNC · 2 pointsr/Leathercraft

Looks really sharp!

For burnishing, I've gotten lazy and bought a dremel attachment and I think the big slot on here should fit a 3/8" slab of leather?

I use a mix of Bees Wax and Gum Trag and then run over the edges, back and forth a few times to moosh the fibers together and smooth the edge.

As others have said though - anything that can provide a little bit of friction will work. It's easier if you wet the edge with something, and I think water will even work in a pinch.

Linked product note: I'm not shilling for amazon, or any specific product - just linking items that I've bought as examples :)

Congrats on the leatherworking! I'm almost done with my last 7/8oz side. I didn't think it'd be this fun :)

u/x39fmj · 2 pointsr/knifeclub

http://www.amazon.com/Tandy-Leather-Small-1238-24-Black/dp/B0035R3N1I/ref=pd_sim_ac_7?ie=UTF8&refRID=07NBN7D8N45CMX7AXTSG

I got it originally to put on an IWB leather sheathe, but it's too thin for that. Works great for a pocket clip though!

u/ardentTech · 2 pointsr/Leathercraft

Good question, and it pains me a bit that I have a small box of unused tools that were purchased when I began. I'm sure I missed a few things, but here you go:

u/jassack04 · 2 pointsr/EDC

Yeah no problem. It rides in my back pocket like a 'deep pocket clip' styled knife, you might only be able to see the bottom edge of the sheath. I really need to get a picture to help illustrate this, but when I first got it I just bent a heavy paperclip into a hook and wired it to one of the 2 holes on the bottom of the sheath. This worked fine but was pretty tacky. I had found the steel clips online but was unwilling to pay the approx $5 or more to get one to my door, so I just kept an eye out when going to the craft store with my wife. I got one there for like $2. It ended up being much longer than my paperclip solution and would bottom out in some of my pockets when attached the same way. So, I actually drilled 1 of the 2 rivets near the top of the sheath, and mounted the clip upside down through it with Chicago screws, at that position, the fold of the clip hangs sticks just below the bottom of the sheath, which makes it hang upside down in the pocket quite nicely.

I think the Rhino looks awesome, but I too was concerned about how I would like a sheath knife that small, or if I would even carry it, so I chose to spend a little less on my experiment. I think, though it doesn't look as good, the gnome might actually have a slightly more useful shape for its size, the nice curve along the top is a great place to put your pointer finger while making cuts. Overall I really like it. I don't carry it all the time, but that's more a function of other, nicer knives that I've since bought as well.

u/drewmey · 2 pointsr/Leathercraft

In doing my research, I found that the kits on Amazon had a bunch of things that aren't really necessary or particularly helpful. So I opted to build my own.

Instead of a kit, I would walk into a Harbor Freight and buy a wing divider, blow hammer, knife set. Then order a diamond chisel set, skiver knife, and edge beveler. That is a $50 set, that although inexpensive, is going to be better than the all-in-one sets off amazon. You can likely find an old kitchen cutting board, sand paper and ruler around the house (if not a ruler is cheap at Harbor Freight). I grabbed some needles from my mother because she quilts, but you may need to buy a couple of those.

Most sets don't include consumables (leather, quality thread, glue) so I did not include those in the list for comparison. The kits often include items that aren't necessary or are genuinely useless at least for starting out (thimble, groover, multiple of the same tools, 4 different awls, stitch markers when you have chisels, items your not interested in like bad thread, cheap buttons, etc.)

I suggest this style upfront for all hobbies (inexpensive but not crap) so people can get a feel for what they think is worthwhile to upgrade. While some of the items will prove to be plenty sufficient.

u/littleredhoodlum · 2 pointsr/TheGirlSurvivalGuide

You can pick up a rivet tool for next to nothing on amazon. I always doubled up the elastic on the ends and put 2 rivets in each side and one in the middle.

If you're worried about heat stay away from the polyester jeans like Dickies. Good for stain resistance, but absolutely terrible at being breathable. Though I can't say I've ever had a pair of work jeans that breathed well.

I've really have had great luck with the Duluth Trading Jeans though. I swear buy them snug and they'll stretch to be just perfect.

u/chicken_herder · 2 pointsr/Leathercraft

Nice work!

To piggy back on /u/Zhaust, I use this wing divider. Super cheap and strong -

https://www.amazon.com/gp/product/B01EMKLKZM/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

u/JunkyGoatGibblets · 2 pointsr/Bushcraft

I got a small 16$ set from amazon ( Electop 31 Pcs Leather Sewing... https://www.amazon.com/dp/B07998XNQK?ref=ppx_pop_mob_ap_share )

A small all metal diamond punch set ( Aiskaer White Steel 4mm 1/2/4/6... https://www.amazon.com/dp/B014549SNG?ref=ppx_pop_mob_ap_share )

And a really nice, cheap, knife ( BANYOUR Leather Knife Cutting... https://www.amazon.com/dp/B07LD4PC2D?ref=ppx_pop_mob_ap_share )

They worked for what I needed, especially as a beginner!

u/Jericho85 · 2 pointsr/EDC

I have a few options for you that I hope will help. One, you could try a slimfold wallet from here: http://www.slimfoldwallet.com/
They are incredibly slim and still have really decent capacity. And, being soft and slim, you can carry in the same pocket as your iphone (I do, and I was practically obsessive about giving the phone a dedicated pocket for protection before).

For keys, try a true utility key shackle, it's the part actually attached to the keys in the image: http://www.amazon.com/gp/aw/d/B007IOHPRW?pc_redir=1395983890&robot_redir=1. I have one and I love it. Add to that a keychain clip for the top of the pocket (think like a pocket knife style clip, and you free up some serious pocket space: http://www.amazon.com/gp/aw/d/B0035R3N1I/ref=mp_s_a_1_2?qid=1396236800&sr=8-2&pi=SX200_QL40

Combine some of these options with a pocket holster that gives your gun a wallet like imprint and stop worrying about the imprint at all! I do all three. I carry an LCP in my front right pocket in a wallet style holster, and people really think it's just a wallet.

Sorry for the links not being hyperlinked, I'm on a mobile app. I hope these options help you or inspire you to think of something that will work for you!

u/nooysp · 2 pointsr/BdsmDIY

Rivets

Rivet setter and anvil

There are two Tandy's in Austin so I just grab them in store. Their website doesn't have them listed (like the majority of their inventory) but these should be the right ones

u/BobSacramanto · 1 pointr/CCW

Being a cheap sucker I decided to make my own holster instead of dropping $30-$50 on one. I got all my materials from Amazon and all my education from youtube. Links below:

Leather


Kydex


Clip


Screws

Video 1

Video 2a

Video 2b

u/believe0101 · 1 pointr/LeatherClassifieds

Japanese style knife (like this) preferred.

All set on leather now, thanks!

https://www.amazon.com/gp/product/B01N9HDKEA/ref=ox_sc_act_title_1?smid=A4V6KRCAH7YC8&psc=1

u/knoticalknovelties · 1 pointr/Leathercraft

I agree about the proedgeburnishers. They come off centered a lot. I got them replaced, but they're still off, the groove isn't deep enough, widths are wider than they advertise, and the bit is just too big. It makes it unstable for a Dremel.

If you find an decent priced one, let me know!

I actually ended up buying this onethis one off Amazon. It's a bit off center too, but it's grooves and size are much nicer. I ended up being to fiddle with the placement and get it to be mostly centered.

u/dexvd · 1 pointr/Leathercraft

> https://www.rmleathersupply.com/products/copy-of-fil-au-chinois-lin-cable-waxed-linen-thread-size-632

How does the needle sizing work? Would you suggest size 0? I'm used to medical needles where the smaller the gauge the thicker the needle.
Would a 3 prong punch and single be enough?

What are the wing dividers used for?

Is this a decent skiving knife? https://www.amazon.ca/gp/product/B01FP7BQ82/ref=ox_sc_act_title_12?smid=A3UVIPLX0HCKB&psc=1

Is the leather glue I posted good or should I use something like this? https://www.rmleathersupply.com/collections/dyes-glue/products/water-based-leather-glue-glue-spreader-really-strong-and-dries-clear

What do you use to make plastic templates?

u/SoverignSyndicate · 1 pointr/Leathercraft

Groover: Yangou 7 in 1 Pro Adjustable Stitching Groover and Creasing Edge Beveler,Leathercraft Kits, Leather Carving Cutting Edge Tools,Wood & Steel Hand Tool https://www.amazon.com/dp/B07H96WWW3/ref=cm_sw_r_cp_apa_i_DbDJDbN9QD8G0

u/Mattsbagger · 1 pointr/Leathercraft

The set you have is for snaps. This is what you need for the rivets.

Amazon.com: Tandy Leather Factory Rivet Setter Plus Anvil Set
https://www.amazon.com/Tandy-Leather-Factory-Rivet-Setter/dp/B00N7SSICO

u/therealmccory · 1 pointr/Leathercraft

Leathercraft Tool Punch Snap Kit Rivet Setter with Base for Punch Hole and Install Rivet Button (Pack of 11) Die Punch Snap Kit Rivet Setter with Base for Punch Hole and Install Rivet Button https://www.amazon.com/dp/B01ILTJ65G/ref=cm_sw_r_cp_api_343KAbMFZB4W4

This is the set I have, am I just using the wrong handle?

u/mgondek · 1 pointr/Leathercraft

Here is the link to the kit (Electop 31 Pcs Leather Sewing... https://www.amazon.com/dp/B07998XNQK?ref=ppx_pop_mob_ap_share)

The needles suck though and I got this as well (Jdesun Wooden Needle Case with 40... https://www.amazon.com/dp/B07MKK1R85?ref=ppx_pop_mob_ap_share)

u/pornhub- · 1 pointr/howto

Caydo 360 Sets 3 Sizes Leather Rivets Double Cap Rivet Tubular Metal Studs with 4 Fixing Set Tools for DIY Leather Craft, 4 Colors (Gold, Silver and Bronze, Gunmetal) https://www.amazon.com/dp/B07FKCGSP8/ref=cm_sw_r_cp_api_i_6-MsDb4TMGRAP

u/shadebot · 1 pointr/Leathercraft

Yeah for sure, there's a ton of different one's on Amazon ranging from like $18 - $150 with all different kinds of tools. I'm not sure if this is the exact one I got when I first started or not, but if you just search "leather working kit" on Amazon you'll see all the different tool kits and stuff to choose from.

https://www.amazon.com/Practical-MIUSIE-Complete-Professional-Leather-Bookbinding/dp/B07FSGLRDP

u/DatNinjaMan · 1 pointr/EDC

hey guys there is this
Clip From Amazon

u/Cellophane_Girl · 1 pointr/Random_Acts_Of_Amazon

I live in South Carolina and I love the rolling thunderstorms we have. The hard intense rain with the low rumbly thunder is really soothing to me and the best weather to take a nap in ever.

Don't like the heat though, not one bit.

These craft spikes would be cool, they are under $8 with free shipping (no prime needed either). They are on my "Art Stuffs" list

Thanks for the contest and welcome to RAoA! :)

u/holleringhippies · 1 pointr/LeatherClassifieds

I use a regular ole japenese skiving knife and also a "safety skiver"
https://www.amazon.com/dp/B00IVS667Y/ref=cm_sw_r_cp_apa_i_VQKoDbN9DVCAK

With the safety skiver I would definitely say you need some practice on scrap and to be careful because you can easily go all the way through thin leather like that.

u/genericdude999 · 1 pointr/snowshoeing

This might work. Better superglue the threads though, or it might come unscrewed.

u/RoadieRich · 1 pointr/holsters

You could probably replace them with chicago screws or similar.

u/Dietzgen17 · 1 pointr/Leathercraft

I recognize the value of good tools but I'm taking an introductory leatherwork course and although it's really interesting I don't know whether I'll be pursuing this craft anytime soon. The classroom has a skiving machine but only the teacher can use it. Would an inexpensive knife work or would it be uncomfortable or even dangerous? I saw these two on Amazon. Please bear in mind I'm one of the least dexterous people you'll ever meet.

​

https://www.amazon.com/Stainless-Leathercraft-Cutting-Skiving-Accessories/dp/B01N9HDKEA/ref=sr_1_4?s=arts-crafts&ie=UTF8&qid=1540603103&sr=1-4&keywords=skiving+knife

​

https://www.amazon.com/Safety-Skiver-3001-00-Replacement-3002-00/dp/B00IVS667Y/ref=sr_1_6?s=arts-crafts&ie=UTF8&qid=1540603103&sr=1-6&keywords=skiving+knife

u/Reddy_Red · 1 pointr/Burlesquers

Studs or spikes are always a fun way to add shine that are "devilish".

Mirror squares are also a bit more unique too.

Disc sequins are a fun alternative to regular little sequins.

And one of the cheapest options, cut up old Mardi Gras beads, individual beads are pretty shiny when paired with other embellishments.

Edit: formatting

u/infamous_jamie · 1 pointr/Random_Acts_Of_Amazon

I'd be very happy on Monday if I knew I was getting these spikes in the mail so I could work on a DIY vest project!

u/mcadamsandwich · 1 pointr/rawdenim

If you don't mind some rough edges and have a can-do attitude, go the DIY route.

You can pick up a Hermann Oak blank, keeper, cast roller buckle, rotary punch, and Chicago screws for around $50.

Of course, if you want something more polished, go the professional route with WH Earl, Hollows, or Corter.

u/pauselaugh · 0 pointsr/vinyl

Cheap trick: all you need to do is reduce the surface area / coupling of the speakers to the desk.

You can do this with a small piece of wood and a few glass pebbles. The bean shaped ones are the best since the surface touching the board will be reduced as well as the surface on the counter... if you're not near a crafts store you can use aquarium pebbles as well, if you're closer to a pet shop...


If you want to make it fancier, use these:
http://www.amazon.com/100pcs-Silver-Spikes-Screwback-Rivets/dp/B009M12D44/ref=sr_1_1?ie=UTF8&qid=1406070706&sr=8-1&keywords=metal+spikes

And screw those through the board. That's probably the least surface contact you can get. Some good speaker stands are spiked on the floor.

u/BeneficentD · -10 pointsr/ftmspunished

"There, there... now, that's a good girl. Take off for Daddy."

"Look at those sweet nipples, so soft and pretty. Who wants to watch me pierce them with a leather awl and string 'em together?"

"No screaming now. You know the rules. Tears 'n whimpers only."

"Go ahead, slide the pants off too, pet. You know you want to... it's so needy, isn't it?

"Spread those legs wide. You know how to spread. Open wide for Daddy."

"Good slut! Look at you! Such a pretty pussy. Look at the way that little clitlet throbs. Just begging for special attention, isn't it?"

"Bet it would just love to dance along the edge of the straight razor..."

"Shhh... no talking or begging."

"Now then. Looky here... See what Daddy brought just for you, sweetness?"

https://www.amazon.com/Electop-Leather-Stitching-Groover-Thimble/dp/B07998XNQK/ref=sr_1_3?hvadid=174287964859&hvdev=c&hvlocphy=9014002&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=16568547114374764370&hvtargid=kwd-5662362647&keywords=leather+sewing+kit&qid=1554526175&s=gateway&sr=8-3

​

"Now, what's that face? "

"Say, babygirl. You don't really need to be walking around for the next couple days, do you? 'Cause you're really not going to want to move much.

​