Best medical syringes according to redditors
We found 94 Reddit comments discussing the best medical syringes. We ranked the 26 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 94 Reddit comments discussing the best medical syringes. We ranked the 26 resulting products by number of redditors who mentioned them. Here are the top 20.
I've had a lot of success with these syringes. Just fill them up with water and shoot them point blank into your tonsils to rinse everything out. Waterpiks can work, but they are a bit more expensive and you risk hurting your tonsils since you don't control the pressure manually.
It depends on how thick you would like the ring to be. But you are right, it is much cheaper than buying it in the store. You could easily make at least one ring. I usually get several pieces out of the $35. It also comes in a syringe to add very cool details. It kind of works like icing, but in a much tinier scale.
PMC syringe
They're very affordable in bulk
It is only as dangerous as the tools you are using. I advocate using oral syringes to administer nicotine. Here is a link to 1ml oral syringes on amazon
With this syringe and a good glass bottle like this I see no reason people can't take on 100mg nicotine as long as they use gloves.
If you want to make some juice you have menthol or "cool" feeling it's pretty easy.
Get some Koolada and Menthol (PG Suspension) from The Flavor Apprentice and a couple of 1ml and 10ml syringes.
Measure out 10ml of juice you want to mentholize and add 0.5% by vol of either koolada or menthol. So you'll add 10*0.005 = 0.05ml of flavor. Shake extremely well and test (ideally in a dripper so you don't use much to throw off the %), if it's not mentholy/cool enough for you add 0.05ml more.
Once you know how strong to make it just scale up the 10ml addition.
I use one of these http://www.amazon.com/Monoject-Curved-412-Syringes-5pcs/dp/B007Y8230G with a warm water/salt/baking soda solution to irrigate the crypts. Works good, no gagging.
You can buy vials from Amazon or [Goulet] (https://www.gouletpens.com/goulet-empty-ink-sample-vials/p/GP-10006). And you can get blunt syringes from [Amazon] (https://www.amazon.com/Duda-Energy-Syringepk001-Industrial-Syringes/dp/B00NDETMR2/ref=sr_1_4?ie=UTF8&qid=1485633133&sr=8-4&keywords=blunt+syringe) or Goulet as well. You can also use any small glass or plastic vial you might have, I recommend small spice or jewelry jars. You can often find them in craft shops if that's easier and more local for you. Blunt syringes aren't as easy to find in person, but you can often find wood glue syringes like this in any local woodworking or craft shops.
Unfortunately, yes you did purchase a fountain pen with calligraphy nibs, however the 'fine' nib will work well for regular fountain pen writing as I have done in past, and still occasionally do. I hope the points below help you out. Generally, the wider the nib, the more ink it will lay down on the paper, the longer it will take to dry and be smudge resistant. Maybe someone else can address the cartridge cost, they can be refilled with a Blunt tip syringe and any regular bottled fountain pen ink or you can get a cartridge converter.
Remember that fountain pens typically use a much lighter pressure on the paper than most ballpoint pens do, so that might be part of the problem with pen laying down too much ink. The paper you use can make a large difference for how fast the ink dries - the shinier the paper, the longer it takes to absorb, and using an Inkjet printer paper seems to make the ink take longer to dry vs laser printer paper. Some papers will actually 'bleed' the ink all the way through the page (and pull much more ink out of the paper, like a blotting paper - but this is trial and error until you find one you like at the price you like as well.)
I might suggest following link from under Useful Information on the right pane of r/fountainpens for General tips for left-handed FP users along with the other links there.
There is also a whole lot of helpful hints and tips in the right hand pane of r/handwriting under Helpful resources, which I have copied/pasted below.
Helpful Resources
To fill my Eco, I pull the nib and feed out and use a blunt-tipped syringe to inject ink directly into the barrel of the pen. The syringes I use are the perfect diameter to fit in the little hole at the base of the chamber. Here is the link to the syringes I use
Things I forgot to buy were:
Syringe 10ml
extension cord
strong tape
timer
room temp monitor
I use these: https://www.amazon.com/gp/product/B00NDETMR2/ref=pd_sim_328_3?ie=UTF8&psc=1&refRID=T0R49HTGYE0X7SCB0QCE
I love my PureGold carts for the flavor but they break ALL the time, so I keep a pack of these syringes around.
great way to measure and deliver tiny amounts of terps
https://www.amazon.com/1ml-Syringe-Only-Sterile-Syringes/dp/B01DARL378/
Also you don't need to buy an actual home insemination kit, they are wildly overpriced. Ours comes with the sperm but its literally just one of these and youll need a sterile cup for the ejaculate. Dont waste your money on a fancy kit. We bought a speculum from WalMart online for like $5 to ensure we driped right on the cervix.
Your dosing is correct, same as I have.
I ordered these syringes from Amazon that are 1ml and can measure up to .01ml accurately. I take around .03ml to a little over .05ml at a time and can dose that quite accurately, and my personal results agree, a very mellow, not drunken dazey sort of high at this dosage.
Once I started this ratio I'll never go back, won't have to ever buy PG again haha. Maybe go down to 1mg/7.5ml or so just to give a bit more wiggle room with dosage but the syringes are very nice and sturdy, don't fluctuate the oral syringes I'd used before, and it comes with 10 if you need extras! Pick em up and you're good to go my man.
Ok, like this?
https://i.imgur.com/NFrMZ8y.jpg
Vent lines are in red and all are parallel to injection channel.
Looks like you have to be really fast with mixing the resin. I am concerned it is going to start to harden before it has time to work its way into all the molds.
- If I am casting heads and I need a buttload, could I do 4 on each side of injection channel (for total of 8 heads) or would that be too many for resin to work its way in?
- How much resin would this take? I am trying to figure out needle size and how big it needs to be. Not sure if 10mL would be big enough
https://www.amazon.com/Karlling-Pack-Syringes-Without-Needle/dp/B013WWFJX0/ref=sr_1_3?keywords=syringe+without+needle&qid=1555352895&s=gateway&sr=8-3
I have two syringes for measuring lactic acid. A 10ml syringe for mash acid and a 1ml syringe for sparge. Though often, I just estimate the sparge addition with the 10ml syringe, as I figure the sparge pH won't make a huge difference.
The 1ml syringe is also useful when pulling a sample for a refractometer reading, if you use that for preboil/postboil gravity estimations, and the 10ml syringe is useful for measuring the correct amount of Star San to make 1 gallon of sanitizing solution.
Biomed Scientific Syringe Filters PTFE Membrane 25mm Diameter 0.22um Pore Size non Sterile Pack of 10 https://www.amazon.com/dp/B06XPD6PYG/ref=cm_sw_r_cp_apa_i_7dHYDbTZA3G38
3cc Luer Lock Syringe (No Needle), Box of 100 https://www.amazon.com/dp/B01N7IJXO5/ref=cm_sw_r_cp_apa_i_rfHYDbYENAJ6G
You will need both but can use these for insulin ones
https://www.exchangesupplies.org/shopdisp_sterifilt_universal.php
https://www.amazon.com/gp/product/B01DARL378/
Searching was nearly impossible for me; I have no clue how I landed on that. I think this is something Amazon doesn't make easy to search for
P.S. that lacks the caps at the top
so there is https://www.amazon.com/gp/product/B01JJYYWH4
then just pickup the locking caps
https://www.amazon.com/gp/product/B01M3WOQSQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
30g 1/2" needles
https://www.amazon.com/gp/product/B01L9EHGS4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
23g 1" Drawing needles. I would probably recommend going with a 1.5" needle for drawing though. Can be kind of tricky getting last bits out sometimes. Could also go down to 21g, but the bigger the needle the harder it is on the stoppers over time.
https://www.amazon.com/gp/product/B01DARL378/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
1mL syringes. They work!
https://www.amazon.com/Care-Touch-Sterile-Alcohol-Medium/dp/B01MDMA1ZB/ref=sr_1_1_a_it?ie=UTF8&qid=1503790742&sr=8-1&keywords=alcohol%2Bprep%2Bpad&th=1
Individual prep pads.
Something like 65 dollars for all of this to have you set for a good long time on "stickin' supplies."
This is a copy/paste, I know you didn't ask for the other needle shit, but posting it may very well help others. I sent this in a message to a guy asking in a post from a med lab supplier. I would frown upon somebody linking competitors if I were the source in the post, so it was kept private.
Seachem makes an iron supplement. Since you'd be dosing 1 gallon, I'd recommend using a syringe to dose it
No, you can damage your tonsil that way.
Here's what you need; it is gentle and works really well:
http://www.amazon.com/Monoject-Curved-412-Syringes-5pcs/dp/B007Y8230G/ref=sr_1_3?ie=UTF8&qid=1450877531&sr=8-3&keywords=oral+syringe
Just get a pack of these and shoot body-temp water back there as you shine a little flashlight with the other hand.
Anyone who has had a lot of tonsillitis probably has holes in their tonsils, and these clean them out.
Just to add to your post, someone on /r/diy_ejuice taught me this trick a long time ago.
Buy a box of 1ml syringes like this one from amazon, and use a rubber band to attach the syringe to each bottle of flavoring.
Reusing the same syringe for multiple flavorings leads to a cross-contamination of flavors. I learned this the hard way when my entire collection started smelling and tasting like TFA honey.
https://www.amazon.com/1ml-Syringe-Only-Sterile-Syringes/dp/B01DARL378/ref=sr_1_3?s=industrial&ie=UTF8&qid=1520014388&sr=1-3&keywords=1ml+syringe
if you use too much it will taste extra derpy and you'll have a lower concentration of CBD. You can leave it out and the terps will evap, mostly.
uxcell Curved Tweezers Jewelers Craft Hobby Beading Hand Tool
Pack of 10 x 1 ml Industrial Syringes with 18G x 1-1/2" Blunt Tip Fill Needle and plastic cover
Honestly? I would just look at the testing supplies section at the pharmacy and get the smallest syringe that holds about 5-10mL, probably for medication dosing. Make sure if it has a needle you can remove it. Each syringe will cost about $2.
I'm comfortable sanitizing something like that, but you may want an individual one for each use, and Amazon carries 100 packs for $20.
16 mLs isnt going to go far up on a cup that size. Even on the smaller dixie cups its not a lot. A small visine bottle is 15 mLs in comparison.
Like u/foomits said clinics calibrate each am. I do remember someone saying on here there clinic only calibrated monthly. Which would be weird as then you would have methadone out unlocked always.
Its actually kind of cool that they have the liquid literally all gthe way to the end of the hose and it doesnt drip out, due to vacuum pressure.
i mean i guess its possible that they are in correctly calibrating, but highly unlikely. From an occums razor standpoint if you think about all the ways methadone could be stolen, this would probably be the hardest way.
You could always bring a 200 mL oral syringe and measure it in front of them. However keep in mind that the nurse you do that to will not forget that though.
Heres what a one mL oral syringe looks like. Which is 10 mgs. https://www.amazon.com/1ml-Syringe-Only-Luer-Slip/dp/B01LZ80YOV/ref=sr_1_3_a_it?ie=UTF8&qid=1526498274&sr=8-3&keywords=1+ml+oral+syringe
https://smile.amazon.com/gp/product/B00NDETMR2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
In the mean time, I will post my workaround for this.
http://www.amazon.com/Monoject-Curved-412-Syringes-5pcs/dp/B007Y8230G
It doesn't QUITE reach the very bottom of the bottle but the curved tip makes it so you can tip the bottle and get to the edges. It's a little tough to draw the plunger but a little pull and hold and you will see the liquid suck up the syringe. And then the curved tip makes it easy to get around cartos in tanks or around posts in clearos. I LOVE it.
Oh and I just got my bottles from TVC. I can't WAIT to try them. Speed steeping is still so LONG when you're waiting to taste some new flavors. But it's given me time to decide which of the 9 flavors I will try.
Otherwise that 6ml bottle with TVC label is one of the BEST looking bottles I've seen out there in that form factor. Props to the Chef.
I got a box of these.
also try this >>
syringes >> 100 box :
https://www.amazon.com/gp/product/B007ZDHYTK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
alcohol wipes: https://www.amazon.com/gp/product/B00KJ6U8NE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
those syringes work with the needles from allegromedical if your looking for a cheap alternaitve instea dof paying 51+ for a 100 box
Definitely only buy medical grade micron filters. You should be able to find them with a simple Google search. Let me see what I can find.
Edit: Here are some. They are non-sterile, but that should be fine. If you really feel like it you can find sterile ones, but it's unnecessary as those are more for research in bio-safety cabinets and clean rooms.
Also, you'll need these. The filters and these syringes have what's called a "leur-lock" connection, so if you plan on using micron wheel filters then you'll also need to purchase syringes that are compatible with them.
You're welcome. I'm glad people are finding them helpful. I have a few more in the pipeline. My camera battery died in the middle of the last one I was working on, so I need to re-record it. More to come....
I only use a needle tip for my Nicotine and my PG. All of my flavors are just the syringe - no needle. Here's exactly what I purchased from Amazon to use for my flavors. You get 100 of them for $12 (or the cost of 2 packs of smokes - that's how I price all of my vape supplies).
Here's what my doc suggested for me:
18g Needles for draw:
NIPRO HYPODERMIC Dispensing NEEDLE 18g x 1 1/2" (1.2 x 40 mm)100 pieces
Syringe for low-dose (01.mL - 0.5mL):
1ml Syringe Only with Luer Slip Tip - 100 Sterile Syringes by Care Touch
23g Needles for injection:
Dispensing Needles 23gx1 1/2" (0.60x38mm); Sterile; Luer Lock; Individual Packaged; Qty: 1 Box of 100 Needles
$50 of supplies should last you almost a year.
15ml bottles that are about 23mm or 24mm in diameter.
https://www.amazon.com/gp/aw/d/B00V2C0C7Q/ref=ox_sc_act_image_1?smid=A3II9QTY8DMVVH&psc=1
Agitators.
https://www.amazon.com/gp/aw/d/B007IK9M4K?psc=1&ref=ppx_pop_mob_b_asin_image
Syringes.
https://www.amazon.com/gp/aw/d/B01LZ80YOV?psc=1&ref=ppx_pop_mob_b_asin_image
Liquitex. Maybe use airbrush flow improver?
https://www.amazon.com/gp/aw/d/B002648RDU?psc=1&ref=ppx_pop_mob_b_asin_title
Then you need a rack and some paint.
Here’s a youtube video. Its about 4:30 mins and I watched it once and dove in. Followed his method.
https://youtu.be/p_OR2ZeMKNU
Duda Energy Syringepk001 Industrial Syringes with 18G x 1-1/2" Blunt Tip Fill Needle and Plastic Cover, 1 mL (Pack of 10) https://www.amazon.com/dp/B00NDETMR2/ref=cm_sw_r_cp_api_i_4031CbZRE496Z
This type is easy to find and has a bigger tip
https://www.amazon.com/ExactaMed-Medication-Medicine-Dispenser-Exacta-Med/dp/B01BM3MC40/ref=sr_1_2_a_it?ie=UTF8&qid=1498073679&sr=8-2&keywords=baby+syringe+10ml
Sounds normal. The holes should gradually close. Don't worry about it. Predictable that the one that was impacted and was more work to get out has the larger hole.
Get one of these curved syringes to gently clean
http://www.amazon.com/Monoject-Curved-412-Syringes-5pcs/dp/B007Y8230G/ref=sr_1_12?ie=UTF8&qid=1410742677&sr=8-12&keywords=Syringe
See a dentist if you have bleeding at this point or swelling/infection.
Give your dentist who removed the teeth a call for peace of mind.
I would recommend maybe a different douche to wash you out. I remeber using a smaller one for myself didnt work well. I use one i can hook into shower which doesnt take long to be completely clean or used this since it was pretty cheap and it works well too.
Buy a pack of cheap 1mL oral syringes, something like these. Mine are marked every 0.02mL. Since you're dosing so low you may want to dilute by half so that your preferred dose is an even 0.1mL.
I have a 250ml syringe that I draw the water up from the black catch trays. Very simple but it works great!
https://www.amazon.ca/Karlling-Plastic-Hydroponics-Nutrient-Measuring/dp/B0747KL5XQ/ref=mp_s_a_1_3?crid=2XDDTOCDKIMQW&keywords=large%2Bsyringe&qid=1551274706&s=gateway&sprefix=large%2Bsyringe&sr=8-3&th=1&psc=1
Yes you can get syringes on Amazon like this that don't have needles and I just suck up some of the product out of the jar and squeeze it into an airless pump. I make sure everything is sanitized by boiling it for a few first.
Side note: If you know any nurses/doctors/people in medical field, you can ask them if they have any as well. They might give you one to use-that's what I did.
Blood draw tubes are vacuum sealed. If you have any bag of fluid with a hypodermic needle attached and insert it into a blood draw tubes it will automatically suck up the fluid.
The set up.
Luer Lok Syringe filled with blood colored liquid. Attached to a Luer Lok vacutainer access device hidden on the actor. If you need to you can have a larger bag of fluid attached to Luer Lok IV tubing attached to the access device. Either way hide that part of the set up on the actor near the blood draw access point, probably arm. The you will need a few vacutainers to draw the blood in. If you want to have a needle for effect use blunted or filtered needles as they are much safer. Even one of those turkey injection needles would work as they are blunt, easy to purchase, and more easily seen from a distance. To draw the blood simply attach the vacutainers to the access device until it fills, remove it and repeat as necessary.
Links to supplies.
Luer Lok Syringe
https://www.amazon.com/gp/aw/d/B01DARHDV8/ref=mp_s_a_1_4_a_it?ie=UTF8&qid=1518202445&sr=8-4&keywords=luer+lock+syringe&dpPl=1&dpID=51lZ4jilSrL&ref=plSrch
Luer Lok vacutainer access device
https://www.mooremedical.com/index.cfm?/Vacutainer%AE-Luer-Lok%20-Access-Device/&PG=CTL&CS=HOM&FN=ProductDetail&PID=8985&spx=1
Vacutainers
https://www.thomassci.com/scientific-supplies/Vacutainer-Blood-Collection-Tubes
The links are to demonstrate, most medical supply companies only sale wholesale. Your best bet is to know someone with access to a small amount of these devices (MD, RN, Paramedic, Phlebotomist) or call around to pharmacies, hospitals, and labs to ask for it to be donated or sold third party in small quantities. Unless your budget allows for 500 bucks for a single effect.
Process video, skip to 5:00 for relevant part. Notice the syringe plunger automatically goes down with the vacuum.
https://youtu.be/7NSEFVbzTAU
Hope this helps.
These were the ones I saw that made me ask. Looking closer it says they are sterile and individually sealed... but it says it's for industrial use only. I ended up bookmarking these instead because they specify they can be used for oral medication.
http://www.amazon.com/gp/aw/d/B007ZDHYTK?cache=e4792d6cbe183a50047243d63125666b&pi=QL40&qid=1406635484&sr=8-1#ref=mp_s_a_1_1
If you're super worried about it I'd suggest you buy a [syringe] (https://www.amazon.com/dp/B01DARHDV8?ref=ppx_pop_mob_ap_share) to drain the excess water.
I tried replacing the port on the top of my res with a fitting and tubing, but when I'd pour down that, the liquid would just stop in the tubing because I had no other open ports for air to escape.
I really like the syringe with hose that I've been using. I can get the hose into tight places when the res isn't in a convenient spot, and if I pour a little too much, I can use the hose to take some back out.
The cooling system should be compatible with your case and components.
For the pump/reservoir mount, I'd recommend the EK-UNI Pump Bracket for 120mm that will mount to your radiator instead of relying on it "appearing" to mount to the bottom of the case.
For maintenance, get one of these or one of these for filling and refilling your loop. For draining, you want a Y splitter or T splitter and a ball valve. Adding the drain to your loop will require additional compression fittings, some tube, and probably a M-M rotary extender as well as a plug.
Tips and tricks: Buy some extra fittings. Having a few 90 and 45 degree adapters and some M-F extenders around will help you route tubing around your components, and make your build look considerably better.
That's pretty similar to what I do. Except I have hard tubing and my res lines up with one of my extra PCI brackets in the back of the case, so I fill through there. I also found that using a barb fitting, short piece of tubing, and funnel made it very hard to fill because the fill port is the only opening to allow water in and air out. It took forever to fill using that method.
I ended up buying a 100ml syringe on amazon, and that made it so much easier. It's also easier to fill all the way up to the plug using this method.
get you one of these bad boys, a flashlight, and a mirror:
http://amzn.com/B007Y8230G
Gag reflex would probably still be a problem, but it may help if you're looking at what you're doing without the idea of sticking your finger down your throat.
Here you go------------> https://www.amazon.com/gp/aw/d/B00NDETMR2/ref=mp_s_a_1_3?ie=UTF8&qid=1492198201&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=needles+and+syringes&dpPl=1&dpID=21QMRgUme4L&ref=plSrch
look on amazon, between the item description and the "questions ask/answered" section regarding the product, i have seen some where this information is provided. 0.1ml is the amount delivered from one i saw i believe.
-
I recommend this one... it's 30ml but EASILY fits into your pocket.
-
the glass one here is much better then the plastic one from the same company, and i'm relatively sure it delivers 0.1ml per squirt
-
To make sure, simply fill it with an amount of water measured using an oral syringe (available for free at almost all pharmacys, just ask the pharmacist, say that your little brother got some medicine that requires one for measurement and needs it... though i prefer ones with a long blunt tip, available on amazon as well [here's the 10ml ones i often use and love] (https://www.amazon.com/Duda-Energy-Syringepk010-Industrial-Syringes/dp/B00DXPRTHG/ref=nav_ya_signin?ie=UTF8&qid=1467798872&sr=8-2&keywords=10+ml+blunt+tip+syringe&)
-
and [here's some 1ml ones] (https://www.amazon.com/Duda-Energy-Syringepk001-Industrial-Syringes/dp/B00NDETMR2/ref=sr_1_1?ie=UTF8&qid=1467798956&sr=8-1&keywords=1ml+blunt+tip+syringe) that i got but haven't tried yet, they reviewed well though
I'm new to microdosing but it seems the two worst things for LSD are light exposure and chlorine. You definitely want to use amber bottles as they will prevent breakdown from light exposure. You definitely will want to use distilled water. It's like .88 at wally world for a gallon. I would go for a one tab per bottle method. One 100mcg tab is about a months worth for microdosing. Definitely use glass, plastic absorbs and is permeable. I've never seen anything on this but it makes sense. I used these bottles...
https://www.amazon.com/gp/product/B010JH19EY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
Put in 10ml of distilled water and I bought these syringes,
https://www.amazon.com/gp/product/B07G76Z5CJ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
They are 1ml syringes, so 1 ml is 10mcg dose if you use 100mcg tabs. It's easy to adjust with those syringes, .5ml is 5mcg and so on.
As for your remaining tabs, wrapping them in tin foil to prevent light exposure and stick the tinfoil inside a book, the book pages will prevent moisture damage.
I wouldn't make everything up at once. One it's easier to hide a flat sheet of tabs inside books. It's harder to hide or store ready made bottles. There is more of a chance of someone finding the bottles if that is an issue. Also it's nice to keep the paper tabs in case you ever want to take a full dose. It's easier to take the tab. Keep the made bottle in a cool dark spot. The fridge doesn't seem to be necessary. Also It adds daily light exposure. LSD doesn't seem to like highly varying changes in temperature either. From what I've read in an amber bottle it is safe, but better be safe than sorry. Alcohol seems to be used to prevent mold contamination but if you keep your dosage in 10ml bottles than alcohol doesn't seem to be an issue. I use the 100 pack of syringes and just use an new syringe each time. I also am not planning on reusing the bottles. They are cheap enough. I'm sure you could rinse them out with distilled water but I haven't seen much on this in my research. Again I am new to this and I may be completely wrong, these are just what I have found in my research. Pretty much minimize light exposure, definitely don't let it come in contact with sink water, has chlorine and other solids in it, and prevent temperature changes and you should be fine. I've read stories people had lsd in distilled water that was months old and stored in an amber bottle and it was fine.
NovaFerrum comes in both a raspberry grape flavor and a chocolate flavor, and seems to be the easiest to tolerate.
If you use a medifrida pacifier to administer it, it should go past the back of her tongue, which helps. You can also use a disposable syringe each time instead of re-using the medifrida one, which makes it WAY easier - you only have to rinse out the pacifier part, and the disposable syringes fit just as well into the pacifier hole.
If you do the syringe+pacifier combo, and give it to her riiiiiiiiiiight before a feed when she’s already hungry, she may be able to gulp it down without really noticing. You can even chase it with an extra syringe of milk/formula to help push it through the pacifier and get the taste off her tongue before transitioning to the bottle/breast, if she tends to refuse her feeds after tasting the iron. That’s been the winning combo for us!
Thanks. That's exactly what I was looking for. So you recommend getting a box of these over the pipettes?
I'll probably pick up another order of these as well. Got them on my first order, but ran out quick. They aren't the most amazing bottles, but I find them perfect for test batches.
For anyone using FST, especially SS's FST, I would recommend getting a box of 1ml oral syringes, like the ones in the link below, to measure your liquid to exact 1/10th's of a ml. And OP is right when he says that SS's new batch of FST is very strong.
http://www.amazon.com/gp/product/B007ZDHYTK?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Can people not order them off amazon? Are you just expecting them to be free?
1ml Syringe Only with Luer Slip Tip - 100 Syringes by Care Touch https://www.amazon.com/dp/B01DARL378/ref=cm_sw_r_other_apa_NOwLxbF6ZA20D
Just to add on, if you get annoyed drawing T into insulin syringes, there are "no waste" syringes which also work very well:
https://www.amazon.com/gp/product/B01DARL378/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
I enjoy the convenience of not having to fuss with needles anymore, so I've just switched to insulin syringes.
Also, Defy's staff are sticklers when it comes to early refills. I asked for a refill a week early and they said no...I had to wait out the week, then a few more days for the pharmacy to send it, and then a few more days for FedEx to deliver.
http://amzn.com/B000O3VRTQ
+
http://amzn.com/B007Y8230G
Flush those pockets out a couple of times a day.
Use a syringe (without the needle). That's what I use, and it's very accurate.
https://www.amazon.com/ExactaMed-Medication-Medicine-Dispenser-Exacta-Med/dp/B01628CDEE
Yeah, they're a pain in the ass. I think because Amazon wants certain medical supplies only sold under business accounts. Anyways, couldn't find just the needles for pinning but these would work unless you're a fatty.
Draw: https://www.amazon.com/gp/product/B07GZ2VQ87/
Pin: https://www.amazon.com/Care-Touch-Syringes-Luer-Lock/dp/B07FXRCP7T/
edit
Please be fucking careful. Don't be stupid. Take the time to accurately prepare your solution and to diligently track your usage. Don't use too much, be careful what you combine this with, and don't get careless. There are few drugs more susceptible to overuse than cocaine. I can personally say that switching to this method made me eventually get tired of coke, because once you can do it non stop all the time it loses it's appeal and you start to feel a bit like a junkie.
I would highly recommend keeping your solution strength as low as possible and limiting your use to no more than two days per week with at least 3-5 days between sessions, and taking a month or two off every once in a while is always a good idea. You'll spend way less money and will feel better physically, and you will be more able to maintain that sweet spot where you are feeling good but are still mentally sharp.
Typical nasal spray bottles seem to be designed to coat your entire nasal cavity with a widely dispersed mist, which means most of the solution ends up being absorbed by the nasal mucosa and having to travel through the blood vessels in your nasal cavity to the brain. Something that allows you to target (idealy) the olfactory epithelium and or the trigeminal nerves in the nasal cavity will allow faster delivery to the brain and reduced waste. This will also help to limit damage to the nasal mucosa by allowing you to use less solution while delivering more directly to the brain. See:
Ideally you'd try to find something like Impel NeuroPharma's POD (Precision Olfactory Delivery) device, which is designed to target the spray more effectively to the nerve clusters in the upper nasal cavity. However, it seems to be nearly impossible to source one of these devices online. That being said, there do appear to be at least a couple available devices that might come closer to the POD than standard nasal spray devices:
Note that you'll probably want something with a clear bottle, which makes it much easier to see how much solution is left in the bottle and allows you to spot any impurities in your product (cocaine should rapidly dissolve and leave the solution nearly completely clear, while many adulterants will take longer to dissolve or will not dissolve at all, leaving the solution cloudy with particulates at the bottom of the bottle.
I haven't personally tested these devices so I can't say for sure if they are any more effective than a standard spray device, but it looks like they should give you greater control over the dispersion target. If anyone knows where to find one of the specialized delivery devices, please let me know.
Once you have your nasal spray device, you'll probably want some way to consistently prepare your solution. A simple oral syringe will allow you to measure an exact amount of solvent (saline solution):
Saline Solution:
A digital milligram (.001g precision) scale will allow you to measure your solute (the powdered, water soluble drug) with reasonable (but not perfect) precision:
Scale:
A funnel will make it easier to get everything into the bottle and is recommended:
Once you have all the necessary supplies, unscrew the cap on your nasal spray device and put the funnel into the bottle mouth. Figure out your desired strength for your solution and then measure out the corresponding amount of saline solution and cocaine. The trick with this delivery method is figuring out the correct concentration for your solution depending on how strong you want each spray to be. I've found that 25mg/ml is perfectly sufficient, 50mg / ml is more than enough, and anything stronger is a bit of a waste. In fact, there seem to be diminishing returns anywhere past around 20mg/ml, and in many cases 15 or even 10 mg/ml seems to work just fine.
First pour the cocaine into the funnel (you don't need to pulverize it), and then using your oral syringe squirt the saline solution onto the cocaine in the funnel where it will rapidly dissolve and fall into the bottle. You could mix the solution in the oral syringe or elsewhere, and you could add the saline solution before the cocaine, but then you'll either end up with wasted solution in another container or a funnel that still has some powdered cocaine on it. If you pour the cocaine straight from the scale into the funnel and then use the solution to wash it down, you should end up with very little wasted cocaine and a nearly clean funnel.
I'd recommend to start with a weaker solution and try it out, you can always add more cocaine until you figure out the optimum concentration. If you decide to do this, replace the saline you've used each time you add more cocaine so you can accurately track the strength of your solution at each interval.
At this point you're ready to screw the cap on and use the spray. I'd recommend one pump in each nostril - any more and you'll end up with wasted solution dripping down the back of your throat. However, you can limit waste by laying over the edge of a surface and tilting your head back so that gravity naturally draws the solution towards the olfactory epithelium. In this case two or three sprays per nostril seems to deliver a stronger dose with negligible waste. 30 seconds to one minute seems to be long enough to avoid excessive waste, and 15 seconds may in fact be long enough.
I think that pretty much covers it. Be forewarned that this delivery method makes it much easier to redose, which would probably contribute to an increased risk of addiction and a tendency towards excessive and chronic use. Also, some have said that this method doesn't deliver the same powerful "kick" as snorting powder, which makes sense as you are using much less of the drug per spray than you would if you snorted a line. For an illustration, lay out what would be a typical line for your and weigh it with your scale. The spray devices listed above typically deliver 0.1ml of solution per spray, so if you have a solution with a concentration of 50mg/ml, then you're only getting 5mg of cocaine per spray, as opposed to something like 20mg for even a small line of powder. I haven't personally tried making a high strength solution, but you could try mixing your solution such that each .1ml spray delivers an amount of cocaine equivalent to a typical line of powder. This would also minimize the total number of sprays needed and the total volume of liquid you'd need to spray into your nose, perhaps limiting irritation.
However, I've found that even though the absolute dosage is lower the efficacy is much greater, perhaps due to the added liquid facilitating easier absorption and almost certainly due to the decreased waste from powder dripping down your throat or being dispersed and carried elsewhere by the mucous in the nasal cavity.
As a final note, even though the saline solution will moisturize your nose, I'd still recommend using the plain nasal spray to irrigate and clear your nose periodically or at least at the end of the night, as the solution is quite irritating (though of course much less so than dry powder).
Good luck and be careful!
2.5ml/cc Disposable Sterile Syringe with 23Ga Needle, Single Aseptic and Separate Packaging (20Pack) https://www.amazon.com/dp/B07F6YMFMN/ref=cm_sw_r_cp_api_i_1pVXDb0329TMK
I got everything separately.. Now I know I should have gotten my flavors and nicotine from wizard labs, but I ordered nicotine from nude nicotine and flavors from TFA's website. Also don't get a pack of flavors, just pick a couple of recipes you'd like and order those flavors. Here is a shitload of VG for sale on amazon. Grab some syringes, and glass dropper bottles while you are there and you're ready..
EDIT: You'll also need some bigger syringes or a graduated cylinder..
I would read the sub for a couple of days, make sure to look at the top posts and search some stuff you think of.. I really wish I would have done that before I just bought a bunch of shit.
Oh yeah I'm talking about something like these.
You can get them on Amazon
​
https://www.amazon.com/20Pack-2-5ml-Packaging-Veterinary-Industrial-Disposable/dp/B07F6YMFMN
This made me cringe. Don't stick stuff in your sockets, like, ever. You may not be in pain anymore but there is still serious healing going on in there. Did you not have a post-op appointment? You don't want to leave debris in there and definitely want to irrigate each time you eat because you're not at risk for dry socket anymore but you can still cause an infection. I would call the OS or Dentist that performed the extraction or purchase dental syringes on Amazon because you need that curved tip. I'm a month out and still irrigating. This is gross, but, if I'm at my mother's house for dinner and have nothing to irrigate with I use her kitchen sink sprayer.
Sticking non-sterile objects in your extraction sites is the worst advice ever. You're not even close to being healed and you could really do some damage. And you should definitely be brushing your gums at the surgical sites at two weeks. If you haven't, you've got two weeks worth of junk built up back there. Keep it super clean at all times and please, for the love of all that is holy, keep things out of it.
http://www.amazon.com/Monoject-Curved-412-Syringes-5pcs/dp/B007Y8230G/ref=sr_1_2?
Is it an upper tooth that's giving you pain? You could also try finding a little curved syringe and flush warm salt water into the socket. Sometimes, food gets up there that causes the pain.
http://www.amazon.com/Monoject-Curved-412-Syringes-5pcs/dp/B007Y8230G
I'll hook up bro!
Use ecig express to order Flavor Concentrates and bottles
— Use ELRECIPIES for 10% discount
Use The Flavor Apprentice/The Perfume Apprentice for Flavor concentrates
— Be sure that they are made for ecigs
— Better than ecig for bulk orders
Buy vegetable glycerin, and syringes from amazon
— Buy a gallon for bulk
— Buy 10ml, and 1ml syringes
— Buy Tupperware or something to contain 16 oz of liquid to steep ejuice
Buy nicotine from Nude Nicotine
—Purchase “Smooth” Nicotine salts
https://www.amazon.com/Duda-Energy-Syringepk001-Industrial-Syringes/dp/B00NDETMR2/ref=pd_lutyp_bia_3_4?_encoding=UTF8&pd_rd_i=B00NDETMR2&pd_rd_r=S32X53GMX38H2DP662TC&pd_rd_w=NhTrE&pd_rd_wg=Rt1HG&pf_rd_i=desktop-typ-carousels&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=2798022962&pf_rd_r=S32X53GMX38H2DP662TC&pf_rd_s=desktop-typ-carousels&pf_rd_t=40701&psc=1&refRID=S32X53GMX38H2DP662TC
https://www.amazon.com/Duda-Energy-Syringepk010-Industrial-Syringes/dp/B00DXPRTHG/ref=pd_sim_328_5?_encoding=UTF8&pd_rd_i=B00DXPRTHG&pd_rd_r=G7GP5J47E1CRQPHET2VD&pd_rd_w=yULCb&pd_rd_wg=yRWOy&psc=1&refRID=G7GP5J47E1CRQPHET2VD
https://www.amazon.com/gp/product/B00PSGWHIO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.ecigexpress.com
http://shop.perfumersapprentice.com
https://www.nudenicotine.com/product/nicotine-salts-smooth/
60ml Catheter Tip Disposable Syringe - 5 Sterile Syringes by Care Touch https://www.amazon.com/dp/B01LWX4FEC/ref=cm_sw_r_cp_apa_YI.bzb9BGTPJV
I’m always a big fan of injecting rotten fish juice into a dudes locker or all over his shit in passing in the hall. You can substitute rotten fish juice for deer or fox piss. Do it in the morning so he smells like nasty shit all day. Aim for the leg of his pants or his back so he doesn’t realize it’s himself that smells.
Also check this out
https://www.amazon.com/Shomer-Tec-Special-Ingredients-Military-Putricant/dp/B00ABV7RCM
You could do the same thing to the lying bitch you know! She deserves some revenge too if you ask me.
I use a different Co2 so can't say as I don't have that to check, but the flourish I use is 2 times a week as well.
For measuring you can use the cap(I hate doing that) or look for syringes that would be the right size for your tank. There's quite a variety. You should be able to find something that measures up to what you dose and has a way to get it from the bottle.
Some examples Curved tip like this one, or even using one without the curved tip with airline tubing that you measured how much it holds in addition to the syringe.
Those were just quick links, best to shop around a bit more or find something local for cheaper.
For the PG solution I use the small visine (eye drops) bottles. I calibrate each bottle I mix up but from memory it's something like 25 drops to a mL. Not sure what API means, but I'll throw out a guess and think it's alcohol. You'll have to do some research to see if the plastic they use for the bottle reacts with alcohol (or whatever solvent you end up using)
That pipette you linked to sucks ass. It's very flimsy, thin plastic. It can be broken or malformed very easily. That said, yes, it would work. Personally I recommend you get something more formidable. You will get better accuracy using a 1 mL insulin syringe. for instance: http://www.amazon.com/Pack-Industrial-Syringes-Blunt-Needle/dp/B00NDETMR2/
Also, we still use oral dispensers that we buy on amazon. Works for our 3.5yo still
10ml Oral Dispenser with Cover- 100 Syringes by Care Touch (No needle) https://www.amazon.com/dp/B01JJYMOP6/ref=cm_sw_r_cp_api_i_oEiXCb0EZN52N
Looking at the instructions, I calculate 0.5 ml per day for 25 liters (6.6 gallons). I would suggest upping your daily dosage. A syringe like these should help you measure. If that's too much, you'll know because your water will get cloudy.
I use one of those saftey b=aby syringes which is marked. I took the safety piece off and it works like a charm. Just dilute your LSD in more water so you can use more than drops at a time. I used 2 tabs in 100ml which makes each ml equal to 2ug. My usual dose was 20ug so I would just take 10ml of my solution and it worked like a charm. Easier to get more precise measurements when your solution is more diluted as well.
Something like this would work perfect https://www.amazon.com/ExactaMed-Medication-Medicine-Dispenser-Exacta-Med/dp/B01DS61NM6/ref=pd_lpo_75_tr_t_3?_encoding=UTF8&psc=1&refRID=5EDJTJAZ2KZFTC8GMC5P
Duda Energy Syringepk001 Industrial Syringes with 18G x 1-1/2" Blunt Tip Fill Needle and Plastic Cover, 1 mL (Pack of 10) https://www.amazon.com/dp/B00NDETMR2/ref=cm_sw_r_cp_api_i_b7IbBbRYC5J4G
It's not 250ml but I have one of these. Here is a 150ml from another vendor.
Hey thanks I was looking for a "holy grail" juice source and that looks pretty good I'll def check it out!
What is the proper way to store it to keep it buttery smooth?
Are this the best kind of syringes https://www.amazon.com/1ml-Syringe-Only-Luer-Slip/dp/B01DARL378 to use or should I just stick to a typical juice bottle dropper?
Definitely tonsiliths (aka tonsil stones)
These are sticking out because fluctuations in the tissue of the tonsils, caused by ordinary movements or swelling of the tissue, is working the stones out of their cavities.
You can go look up exactly what these are and how they're formed on your own. I'll tell you how I treat them when they are erupting. I've had bad tonsils all my life so this is nothing new to me.
Get yourself a Monoject 412 syringe. On that Amazon.com web page, you'll see that others are using this for the very same thing. Clean after every use.
I make a 50/50 solution of Cool Mint Lysterine mouthwash and water. Doctors will recommend distilled water. Fill the syringe and aim a jet of the solution at the tonsilith. You'll want to use a mirror and a well lit room, of course. Get the tip of the syringe as close to the tonsilith as possible. Once you've dislodged the tonsilith, aim the jet of solution into the hole from which it came.
Doctors will tell you not to stick the syringe into hole in the tonsil. You run the risk of scratching the tissue with the tip of the syringe. If your gag reflex is touchy, you may accidentally induce vomiting, so there's that warning as well.
Once the first stone is gone, hitting the hole with the jet of solution will reveal just how much of that crap is in your tonsils. Refill the syringe as often as needed.
Sometimes you will see the head of a tonsilith rattling around in the hole, but he won't come out. At this point, use a long cotton swab to apply pressure to the OUTSIDE OF THE TONSIL near the occupied hole. If your gag-reflex is touchy, you run the risk of triggering vomiting or EVEN SWALLOWING THE COTTON SWAB. I recommend a firm grip on the swab and the use of LONG swabs.
By applying pressure, you can break up the stone in the tonsil cavity. Rinse again and see if you can get it out.
Gargle when finished. Brush your teeth. Clean tonsiliths from the sink or face the wrath of your housemates.
WHATEVER YOU DO, NEVER SMASH THE TONSILITH BETWEEN YOUR FINGERS AND SMELL IT. SATAN, HIMSELF, WILL ENTER YOUR BRAIN THROUGH YOUR NOSE.