Best office labels & stickers according to redditors
We found 468 Reddit comments discussing the best office labels & stickers. We ranked the 264 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 468 Reddit comments discussing the best office labels & stickers. We ranked the 264 resulting products by number of redditors who mentioned them. Here are the top 20.
Do not deface private property!
It would be illegal to buy sticker paper online- that can be used in any household printer (kind of like this)- and make a hi-res version of this image (kind of like this one I made) and print out as many stickers as you have ink and put them up in public areas where people might actually see them! Don't do it!
And especially don't use a version (like this one) that is easier on your printer ink!
Here.
Here's the comment I linked to.
"Do not deface private property!
It would be illegal to buy sticker paper online- that can be used in any household printer (kind of like this)- and make a hi-res version of this image (kind of like this one I made) and print out as many stickers as you have ink and put them up in public areas where people might actually see them! Don't do it!
And especially don't use a version (like this one) that is easier on your printer ink!"
I made a DND amiibo! (...well kind of). One of my DnD groups plays online on roll20.net, and I've been itching to print them their characters since I bought my 3D printer.
I decided since the minis couldnt be used on an actual table to make them a little bigger (okay a lot bigger) and more interesting by adding an NFC sticker to the bottom that opens their character sheets when tapped on their phones!
Here is Rei, my first attempt showing how it works! Also included in this video is one of my cats - who was super mad that I wanted to demo a figure over petting her.
I plan to take more pics tonight, but let me know what you think!! (You can also set the NFC tag to open discord, roll20, or to even roll a d20)
> E2: Also, no stickers. I'm going to have to sign up to work the polling place next time if that's what it takes to get stickers!
I bought my own on Amazon and delivered it to my polling place this morning. It's about $20 for 1000 stickers.
When I brought them in, everyone was so excited. I think at first they thought I was some sort of sticker official! : )
https://www.amazon.com/gp/product/B00I2TPC0O/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
This is a great idea!
To make it even easier:
1 inch Felt Pads
I inch printable labels
1 inch wooden disks
No cutting required.
My girlfriend and I are huge fans, so I decided to surprise her with this. Along with this, many of the presents I got her were Lost-related. She loved it all!
In case anyone is interested, there are [dharma food labels] (http://maxpictures.com/weblog/2007/04/10/lost-labels-for-your-dharma-initiative-needs/) you can download. I printed them on this [label paper.] (http://www.amazon.com/gp/product/B005ZXCWFI?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00)
Of course, the Milk chocolate bars were regular Hershey bars.
The cheese crackers were a box of Cheez-its
The beer six pack was a combo of 'Blue Moons' and 'Not Your Father's Rootbeer.'
Oh, and the cookies in the second pic were just snickerdoodles I baked (unrelated to Lost).
No need to apologize for "noob" questions. Every question sounds noobish to someone :)
I'm a huge fan of the Dymo 450 Turbo. It's pretty standard.
As for labels, I use HouseLabels labels. They're much more affordable. I used to use the 30252 labels (1 1/8" x 3 1/2"). However, I just switched to 30334 (2 1/4" x 1 1/4") and I love the size, plus it prints even faster (being horizontal instead of vertical. And it is a better size for the cosmetics. You also get 3,000 labels per roll, compared with 350. Much less frequent switching.
30252 on Amazon
30334 on Amazon
As for what goes on the labels, the best advice I can give is to review Amazon's labeling guidelines.
Guide to labeling your products.
Guide to the labels themselves
Let me know if any of that didn't make sense - I'd be happy to expand on it.
Here ya go! 28 stickers for 12$ highly recommend. I had trouble with 13 b2 but 13 b3 they are flawless!!
amazon NFC stickers
My bad haha. Idk why I said best buy. I meant eBay. But nfc tags are basically what's in the ammibo that allows you to scan the items into your game. These ones work perfect for the switch. https://www.amazon.com/NTAG215-NFC-Stickers-Guaranteed-Perfectly/dp/B071KTC2J6/ref=mp_s_a_1_3?keywords=nfc+215&qid=1571801287&sprefix=nfc&sr=8-3 and then follow this video on how to turn these nfc tags into "amiibos" https://youtu.be/Yy34n45mzBo you need to have a phone with an nfc scanner tho. Which iPhones do not have to my knowledge. So yeah just follow that video and if you buy some nfc tags I highly recommend the Amazon link.
I ordered these stickers and these chits
I do the same thing with wood tokens.
https://www.amazon.com/gp/aw/d/B01CSV14JE/ref=mp_s_a_1_1?ie=UTF8&qid=1506542121&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=wood+tokens&dpPl=1&dpID=51mEHnSvQXL&ref=plSrch
And
1 inch stickers
https://www.amazon.com/gp/aw/d/B01DE56YXO/ref=mp_s_a_1_2?ie=UTF8&qid=1506542189&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=1+inch+circle+stickers&dpPl=1&dpID=51o3QxXG4jL&ref=plSrch
Actually this one has higher reviews- the one I initially posted apparently peels off like a champ :(
https://www.amazon.com/dp/B00IMJ2L62/ref=cm_sw_r_cp_awdb_t1_0dFaBbY52RA4M
If you are just doing this split, go with USPS flat-rate.
Also, DO NOT trust the self-adhesive, use tape to ensure a good seal.
If you are planning on truly getting in on the box split game.
This is what I have:
I mostly ship First Class.
“For Rectal Us Only” stickers. Why? For science. And annoying people while amusing myself.
500 for Rectal Use Only Stickers / 1.5" x .375" Blue Stickers with Permanent Adhesive https://www.amazon.com/dp/B07GYRJ99X/ref=cm_sw_r_cp_api_i_jJuGDbR0ETHJY
If you’re ok with 1” rounds, how about 1000 for $9? There are other similar options on Amazon. Take a look.
https://www.amazon.com/Retail-Package-envelope-Circle-Labels/dp/B00NVKO6LK/ref=mp_s_a_1_8?keywords=mailing+seals&qid=1557264631&s=gateway&sr=8-8
Hey. It does suck sort of. There are ways around it.
Here is a LINK to Amazon.com for buying NFC(near-field communication) tags. $13USD.
Here is a link to the amiibo repository to download the files for all the zelda Amiibos up to this point
here is a link to a program for android phones called TagMo which can read and write NFC tags
NFC tags are used in phone cards, amiibos, other crap probably.
What you want to do is buy the tags, and find something to put them in. some people put them in coin cases, some people put them on toys. I didn't think mine through. I put some on my OLD Nintendo DS Lite, I put the ones for baddies on my old Xbox 360 controller where the cord is broken. Some went on toys and some went on video game cases.
Copy the files in the .rar(Use 7zip to unrar them on windows, its free and open source) and pop them in the root of your phones storage or a toplevel folder like /amiibos or /games, whatever, doesn't matter, but make it easy.
Use TagMo to load a file and then take a tag, ONE AT A TIME, DONT WANT TO FUCK THEM UP, and write them to the tag. take your time and dont rush this. You CAN fuck them up but if you go slow you'll be fiiiine.
You may need to search on your phjone for the NFC reader, phones have them in different places probbaly.
Tap the tag to the phone, write it, and then scan it using the amiibo rune. voila. Free ancient parts, free shiek mask.
Its not technically illegal I think but hey when you're able, when you got cash, buy an Amiibo or two. They're not really expensive but to get ALL of them is definitely expensive.
Let me know if anyone has any questions. I WILL GLADLY TAKE YOUR THANKS FOR SPREADING THE WORD **BUT ALL CREDIT SHOULD GO TO THIS POST RIGHT HERE**
no I use Avery Multi-use Labels because it keeps the bag sealed but it also make it a lot easier to reopen
http://www.amazon.com/Avery-Removable-Print-Labels-Inches/dp/B00007M5GN/ref=sr_1_1?ie=UTF8&qid=1457814455&sr=8-1&keywords=avery+multi+use+labels
plus they are cheap
That's why I always carry around one of these. If I see someone arguing in favor of a theory not backed with evidence, I downvote it and slap on another sticker to my shirt.
These are the exact ones I used.
Not sure how little space you have, but when we built our 2-rack server room a few years back, I got this Tool cabinet/Workbench from HomeDepot. Threw an anti-static mat on top and I love it.
If I ever need to unrack something to work on it, I roll the work bench over, unrack and throw it on the bench. All my tools and such are there, the wheels get locked to prevent accidental rolling.
Stuff it in a corner when not in use. Drawers are loaded with patch cables of assorted colors and lengths, fiber patch, power cords, rolls of velcro, zip ties (shush!), cage nuts and various screws in a multi-compartment organizer with labels(!), SFP's, rack wings, etc...couple packs of wire markers
My favorite screwdriver along with a Klein Stubby multi-bit for the hard to reach spots.
I would use something like this, available in different sizes.
I use this Brother Laser Printer (wifi enabled) and use half sheet adhesive labels. I thought the dedicated label printers were too expensive and this allows me to print packing slips as well.
Your house.
https://www.amazon.com/dp/B01DJBMLV2/ref=cm_sw_r_cp_apa_67EVAbSXW7WGP
https://www.amazon.com/dp/B07GYRJ99X/ref=cm_sw_r_cp_apa_i_DyaTCb4ES0FWR
Well, now I know what my boss is getting for his birthday...
Avery 5418
These are the ones I used. Just big enough for the date, small enough to fit on the cello of a lancero. 0.5" by 0.75"
Hm. I work at a winery and every once in a while we get custom labels for people that say things like "Happy Holidays from the Smiths" etc. For 25 bottles, I would definitely recommend Etsy. There are lots of sellers.
Designing is a little harder. You can look around and see if there's an Etsy seller with a design you like? Most will customize. Paying anyone a design fee for 25 bottles seems like it wouldn't be worth it.
In a pinch, we've also printed our own with something like this: https://www.amazon.com/Blank-Full-Sheet-Vinyl-Labels/dp/B01FKXOJOY/ref=sr_1_1?ie=UTF8&qid=1468475384&sr=8-1&keywords=blank+wine+label
If you don't have a printer that will work, you can often bring your own paper to a print store and they'll do it.
Good luck!
Honestly, I'd just try and make your own. The basic version of the Silhouette software is free to download, and there are tutorials on Youtube for how to make your own checkboxes.
Buy some sticker paper from Amazon and then you can print them yourself. You can shop around and read some reviews, but here is a pack of 100 glossy sheets for $10.
It'll be somewhat of an investment up front, but that works out to only 10 cents per sheet. Even if you go to FedEx like I do and pay 65 cents per page for printing, that's still only 75 cents for a full 8.5 by 11 sheet. Most Etsy sheets I've seen are like half that size and 5 times as expensive.
This is a poor indicator of price, but let's take this single roll of stickers as a guideline. $20 for 500 stickers, or 4 cents per sticker. And it's probably significantly cheaper than that, since governments likely purchase these in bulk.
Here is a link for the sticker sheets. They are 8.5 x11” and can probably go into most printers.
https://www.amazon.com/dp/B06WVYGWMD/ref=cm_sw_r_sms_awdb_t1_B4r3BbR782EQ0
I do sharpie on the tag too, unless there is no tag. Then I use these labels.
​
I'd combine this approach with /u/Captainjbao card holder in maybe an index card box or a tin of some sort to put multiple holders within. You could organize the cards within each holder and put a QR code on the holder describing the set. Or even print a proper label either in the center of it or in that top left corner. This would allow you to store potentially dozens if not a hundreds of cards in a single box.
This is my new ethernet networking hub in the new house. I had two Cat6 and one RG-6 pulled to every drop and have 14 drops throughout the house. All of the ethernet drops (red and yellow in the top right of the picture) run to this cabinet and the RG-6 go to a panel to the lower right of this with the cable modem and firewall (pfSense). The house is a two story with a walk out basement and this cabinet is in a storage room next the to the stairs in the finished basement.
Equipment:
Accessories:
Equipment not shown:
The D-Link is currently for the PoE VoIP phones and PBX. The Cisco switch is for everything else in the house for now. There is a Drobo camping on the top of the cabinet which will be decommissioned eventually and content moved to a FreeNAS server. Current power draw from everything here including Drobo is 85W.
Cross-posted in /r/HomeNetworking
edit: forgot to mention that the fiber line runs to the den where the lab will be setup. Currently the other end is another Cisco SG500-28 (the model without the fans, so quiet). Future upgrade is a 10G connection.
Send three backup clothes. Send the sleepsack. Our daycare specifically prohibits bringing toys unless they ask, so I would check.
Label everything: we use these for clothes and these for bottles/sippies. If she takes a pacifier, put it on a tether with her name on it (you can use the same labels as the clothes, or else get the rub-a-dub sharpie).
Hi! I ordered these and they work like a charm to decent products. I don’t like to sacrifice my routine when I travel, and I also do carry on only. This works perfectly!
MHO Containers | Pearlized... https://www.amazon.com/dp/B07BB66N23?ref=ppx_pop_mob_ap_share
I also got these little labels:
Avery Removable Print or Write... https://www.amazon.com/dp/B00007M5GN?ref=ppx_pop_mob_ap_share
Hope this helps!
> Free things cause of the sticker are kind of illegal.
I suppose one could argue that they are rewarding you for having a sticker, not for voting. No one says it has to be a sticker from a voting place, it just has to say you voted. It could also be a sticker showing you voted in 1972...
Get yourself a lifetime supply.
I just use half-sheet labels in a standard printer. Avery 5126 labels are the most common to use, but I found a cheaper version that works great (http://www.amazon.com/gp/product/B0069RY9BY/ or just search for "Avery 5126"). I just tear the sheet in half, print my label, and then just trim close to the lines to make them fit perfectly. I'd love to hear a better solution for printing labels, if anyone has one.
I use these.
I like to put these on each end of the wire.
http://www.amazon.com/gp/aw/d/B003X26Y4I/ref=mp_s_a_1_11?qid=1417382476&sr=8-11&pi=AC_SX110_SY165_QL70
Not this brand but all I could find quickly.
Sorry I didn't give details. Laser printer with two labels per 8.5x11 sheet, like this: https://www.amazon.com/dp/B001PF1BSE/ref=cm_sw_r_other_apa_EIVJxbJFK4YFF
Please do! Feel free to add a url- I don't have one specifically, but I'd prefer if it wasn't explicitly liberal🤷
Thank you so much for asking!
This is the paper I use. You can get it cheaper from the companies website.
The adhesive is good, and it is hard to peel off in one piece.
Also, you could it the sheet with a clear coat spray paint to UV proof it and water proof it
If you ship through ebay, you get free tracking. You'll pay more than a stamp, but at 1 oz (this is the minimum) it should only be about
$1.00$2.00, and your buyers will want tracking. Plus it automatically emails the buyer all the tracking info when you purchase the postage. It's just much simpler than doing it yourself. I would recommend shipping through ebay, especially if you are looking at a lot of volume.I use these labels and have been pretty happy with them. Labels printed through ebay are default 4x6, but if I'm not mistaken you can edit these settings on paypal...like if you have a thermal printer or something like that. If you don't want to buy labels, you can just print them on paper and tape them to the envelope with clear packing tape.
You can use the USPS calculator to check prices at different weights.
You get 50 free listings per month, then its $0.30 per listing after that.
If you're brand new on ebay, I think there might be limits on how many items you can sell per month. Not sure what they are, though.
Edit for getting the USPS pricing wrong.
I’d like to thank this sub for all their ideas! I started my amiibo creation journey with a simple sticker attached to a rubber duck for Epona; when I saw my best man’s amazement when I showed him, I knew exactly what I needed to do for his best man gift.
I started by attempting to have a playing card company print some of the amazing card designs found on this sub. After being rejected for copyright because of the amiibo logo, I edited it out (as that’s where I was planning to place the sticker); they then told me the entire set was not going to be able to be made, which sent me into a minor panic. I switched up tactics and went to making coins.
Since there are so many varieties of coin sizes, I was a bit overwhelmed compared to the stock PVC or playing card sizes. After doing some research, I decided on the AIRTITE 30mm black ring coin holders. This was because the inner diameter is 1.55 inches, and I bought a 1.5-inch hole punch for the smallest amount of wiggle room.
I went for a cleaner look (just image of amiibo) which are downloadable from Nintendo’s amiibo lineup website. I wanted the black ring to be shown on the amiibo side but not the back, so I sized them all to fit within a 1.2-inch circle in word, centered within a 1.6-inch circle. I removed the inner guide circle and copied it into GIMP, a free open source program. This is my first time using it, but the best way I found was to paste each image in as a new layer, transform it to the proper size, and move it into place. (I'm sure there are better ways; this was all trial and error).
It is a destination beach wedding, so I found an appropriate Zelda image that wouldn’t look bad in a smaller size or where too much is cut off because of the circular design. The font is a free download, Hylia Serif. I messed up and sized the image to 1.5 inches, not 1.55 (hence the small gaps at the top and bottom). I printed them at home on glossy photo paper using an inkjet printer.
Assembly went bottom coin holder-back image-NFC tag-amiibo image-black foam ring-top coin holder. I added the black ring to center the 25mm sticker, then removed temporarily in order it to put the other image underneath the ring. While it is possible to reopen them, it is very tedious, and I strongly encourage double checking before closing (don’t forget a sticker like I did…). You can program them after you assemble them without any issues.
This is probably too much detail, but a lot of posts show amazing results and I knew I felt unsure of things many times before I ironed everything out. Hopefully this can make creating your own more accessible for future first timers! I’m going to work on cleaning up my coin pdfs but will post them soon! It’s a total of 36 coins (Zelda, Splatoon, and wedding Mario, naturally).
TL;DR:
Materials: AIRTITE 30mm black ring AIRTITE coin holders; 25mm NFC Stickers; 1.5 inch hole punch
Links:
https://www.gimp.org/
https://smile.amazon.com/NTAG215-NFC-Stickers-Guaranteed-Perfectly/dp/B071ZZTT6T/
https://smile.amazon.com/Black-Capsule-Air-Tite-Holders-Dollars/dp/B01EP1YREY/
https://smile.amazon.com/EK-Tools-Circle-1-50-Inch-Package/dp/B0090JVGFU/
https://www.nintendo.com/amiibo/line-up
http://artsyomni.com/hyliaserif
They are cheaper on Amazon.
https://www.amazon.com/NTAG215-NFC-Stickers-Guaranteed-Perfectly/dp/B071ZZTT6T/ref=mp_s_a_1_3?keywords=nfc+215+stickers&qid=1569471327&sprefix=nfc+215+sticker&sr=8-3
Laserjet over ink jet is preferred. HP has a line of printers that work over wi-fi. Look for Wi-Fi direct HP printers. Possibly buy used on eBay with a return policy. Others may work, but I’ve seen HP invest the most in this tech.
Also, I recommend using half sheet labels from Amazon. PM me and I can send you some extras I have (I switched to a thermal printer now that I’ve reached a nice scale). They save you time from cutting and using tape to attach labels.
If you reach scale (for me 1000+ orders), find a thermal printer (like Dymo 4xl) and probably buy a laptop.
It's probably too late in your project for this, but you can always print alternatively so you can skip the seal step later. However, both of these make double sided figures problematic. This increases the costs, but might balance out some of the sealing costs.
Print to transparencies. (Of course, white is then an issue.) Example: https://www.amazon.com/3M-3700-Color-Laser-Transparency/dp/B00004TS5M
Print to water-resistant labels, and stick onto plastic. Example:
https://www.amazon.com/Packs-BCW-Trading-Divider-Dividers/dp/B005LIF20O and https://www.amazon.com/Neato-Blank-Full-Sheet-Labels/dp/B01FKXOJOY
That is the most basic way to do it, but I've learned that paying for paying for shipping online is probably the most efficient way to do it. Plus they usually give a discounted rate for paying online. All you need is a printer and a postal scale (https://www.amazon.com/dp/B00SMHWZ42/ref=cm_sw_r_cp_awd_JuB3wb2YR63SY). You can even get shipping labels (https://www.amazon.com/dp/B001PF1BSE/ref=cm_sw_r_cp_awd_2uB3wbG6X4SXA) if you wanted to take your packaging a step higher. (Totally worth it imo)
Go to stamps.com or usps.com. Enter your package weight and dimensions. Purchase and print the label. Stick the label on the package and drop it off at a post office. Writing the address on the package isn't hard but I was taking at least a minute or more for each package and now and can get way more packages done in way less time. And don't have to wait in line at the post office anymore.
These are the ones I bought, but unfortunately, it looks like they are currently unavailable. Here's another listing I found with good reviews
I bought these. They seem to work fine. Good price, too.
https://www.amazon.com/dp/B071ZZTT6T
https://www.amazon.com/gp/aw/d/B07SFJB66Jhttps://www.amazon.com/dp/B07GYVF3L2
lol I was just about to say the same thing. It's been a while since a picture has given me anxiety just looking at it. OCD is a terrible thing!
Also, while we are talking about protective cases, I got some clear dot stickers to hold mine closed on one end. They work wonders!
How big are we talking?
Here are some that are half sheet-sized: http://www.amazon.com/Adhesive-Shipping-Lablels-Printers-BL-G8511-100/dp/B001PF1BSE/ref=sr_1_3?ie=UTF8&qid=1452869258&sr=8-3&keywords=half+sheet+labels
And full sheet: http://www.amazon.com/Avery-Full-Sheet-Labels-Inkjet-Printers/dp/B000093L1J/ref=sr_1_1?ie=UTF8&qid=1452869321&sr=8-1&keywords=whole+sheet+label
Just as an example, these are the ones I use when I need removable labels. I'm not sure what kind of labels you use but there are removable ones out there.
Gift 5 - /u/writeandknow Don't Peek
1.) Something that is grey.
2.) Something reminiscent of rain. It always rains when I go camping
3.) Something food related that is unusual. Tiramisu wafer cookies. Better than sex.
4.) Something on your list that is for someone other than yourself. I have a whole wishlist for other people. My boyfriend, gramdma, mom, dad, and little brother.
5.) A book you should read! Clearly. You should have read these already because they are the best books evar.
6.) An item that is less than a dollar, including shipping Not on my wishlist
7.) Something related to cats Leopards are big cats.
8.) Something that is not useful, but so beautiful you must have it.
9.) A movie everyone should watch at least once in their life. Because it's the best trilogy of all time.
10.) Something that would be useful when the zombies attack. To whack them in the head and the use the pick to smash their brains out. And it's foldable so it will fit in a backpack.
11.) Something that would have a profound impact on your life and help you to achieve your current goals. I'm a student and I practically live in the library most of the school year. I need a laptop because the computers at school are SO outdated.
12.) One of those pesky Add-On items.
13.) The most expensive thing on your list. Your dream item. PS4! I need this because I love to game and I really, really need Kingdom Hearts 3. Like really.
14.) Something bigger than a bread box.
15.) Something smaller than a golf ball.
16.) Something that smells wonderful. This is the BEST SCENT EVER. It smells like marshmallows, fire burning, and vanilla.
17.) A (SFW) toy. Grown-up toy!
18.) Something that would be helpful for going back to school.
19.) Something related to your current obsession, whatever that may be. Harry Potter is always an obsession.
[20.) Something that is just so amazing and awe-inspiring that I simply must see it. ]()
[Anything that has my real name on it.]()
Anything made in Oregon. This is a bit of a stretch but bear with me. The Bourne Triology preceeds The Bournce Legacy. Which starred Edward Norton who also starred in Fight Club. A movie based off the book who was written by none other than Chuck Palahniuk who is from Oregon & resides there.
I'll be back to finish this!
fear cuts deeper than swords
https://www.amazon.com/Voted-Stickers-Labels-diameter-labels/dp/B00I2TPC0O
For anyone considering this, be aware that this process requires a specific NFC tag (215). Like this one.
https://www.amazon.com/dp/B071KTC2J6/ref=cm_sw_r_cp_api_i_ToNOCbYJ5CRQZ
Also please note the ethical issue mentioned in the other reply.
you can get those name badge sticker sheets and design a label on it.
https://www.amazon.com/Printable-Sticker-Paper-Sheets-Blank/dp/B01DJBMLV2
I used a laser and made some for myself
https://imgur.com/a/jnzsJGy
First time i found your site i bought these, i had allot of fun. works best with plastic backed, stick tabs straight to diaper tape
And here are labels for you!
I've been using these from Best Print on Amazon:
https://www.amazon.com/gp/product/B0069RY9BY/
They feed nicely through my laser printer, and the stickiness of the labels is better than others I've used.
I love these labels: https://www.amazon.com/gp/product/B00IMJ2L62/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 just use a sharpie and they can go through the dishwasher and washing machine, so great for bottles, sippy cups, clothes, etc.
Avacados sparkle with glitter.
adulting reward stickers
A cheap laser printer and half sheet labels will cost about the same as a thermal printer. Printer toner is cheap and lasts a while. Cheaper if you buy aftermarket toner or figure out how to refill toner.
Still not exactly difficult to bypass.
https://www.amazon.com/NTAG215-NFC-Stickers-Guaranteed-Perfectly/dp/B071KTC2J6/
16 Adult Achievement Stickers (Adulting) - Perfect Funny Gift For White Elephant Gifts, Hostess Gifts, Christmas Presents, or Gag Gifts https://www.amazon.com/dp/B01M6WYM6H/ref=cm_sw_r_cp_apa_gYHfAb1CVP2BT
I use this. have been my go-to for over a year now.
Personally, a little more expensive than the Avery stuff, but way more durable and they look hella nicer. Comes off bottles very cleanly for reuse as well. Print it with a photo/laserjet printer.
Also, you can contact Neato directly about buying in bulk and they'll cut you a sweet price break, plus free shipping (although, not 2-day).
And waterproof (to a great degree).
Here are the ones I purchased (sorry for messy link - on mobile).
9527 Product 100 Sheets Sticker Labels Shipping Address Labels for Laser/Ink Jet Printer,100 Labels. https://www.amazon.com/dp/B06WVYGWMD/ref=cm_sw_r_cp_apa_i_XERHDbRQTS5WN
Price History
ReviewMeta: ★★★★★ 4.8/5 from 101 valid reviews
CamelCamelCamel - [Info] │ Keepa - [Info]
_
Call the Bishop, these prices are sinful.
^(Info) ^| ^(Developer) ^| ^(Inquiries) ^| ^(Support Me!) ^| **[^(Report Bug)](/message/compose?to=The_White_Light&subject=Bug+Report&message=%2Fr%2FNintendoSwitchDeals%2Fcomments%2Fd732nz%2Ftarget_us_links_awakening_amiibo_1299regular%2Ff140v96%2F%0D%0A%0D%0A%0D%0A%0D%0APlease+explain+here+what+you+expected+to+happen%2Fwhat+went+wrong.)**
500 for Rectal Use Only Stickers / 1.5" x .375" Fluorescent Red Stickers with Permanent Adhesive https://www.amazon.com/dp/B07GYVF3L2/ref=cm_sw_r_cp_api_i_MuXDDbS2JWCF7
Personally I like to get these small labels and write my info in small sharpie. Then I will cover them with transparent scotch tape. This way the label never comes off, but also it isn't hanging off the cable or anything like those zip tie ones.
Put some Tape Dots and some box cutters on your order, haha.
It has been a while since I read the return policy, but last time I checked stuff had to be "unused, resellable condition" to process a return.
It's your call as to whether having a look-see from your living room is fair use. Sending items back "just because" incurs a small surcharge so you don't ding the seller's account. It's cheaper than the fuel you'd use to drive to Cabelas.
I haven't been able to find the exact ones I used in that video since I ran out, but the Amazon listing was replaced with these which I have used and they work fine.
Here is something on amazon - http://www.amazon.com/100-Universal-Labels®-Heavyweight-Vertically/dp/B005ZXCWFI/ref=sr_1_1?ie=UTF8&qid=1412937281&sr=8-1&keywords=sticker+paper+100+sheets
Can't add a pic at the moment but I use these. And they work like a charm. Each one holds just under 1/4 kilo.
https://www.amazon.com/White-Plastic-Free-Large-Refillable/dp/B01MZD9TO1/
https://www.amazon.com/Avery-Removable-Writable-Rectangular-Labels/dp/B004GIZ3MW/
And the labels are removable so you can easily update your stash all the time.
This mug came to mind
Or these adulting stickers
If she's a supervisor or manager of any kind
I love this lunchbox
A roll of 500 is only $8.50...
Hey thanks for replying! So I’ve tried about 3 vinyl paper in which all three harbor the same results, “Cricut Vinyl Paper”, PPD Inkjet Glossy Creative Vinyl Stickers , and Neato Blank White Full Sheet Printable Labels .
I’ve tried 2 laminates, XFasten and StyleTech
All can be found on amazon
No problem! You can definitely self-print with sticker paper and cutting them out yourself with some scissors. Or you can draw on sticker labels that are pre-cut into rectangles already. With packing tape, you can make clear stickers, too! Here's a tutorial. Hope all goes well with your sticker adventure!
Please don't. It fades, rubs off, and is un-intelligible. You don't need to buy a $1000 labeling kit, but at least get something like this, this, or even this. Heck, almost anything would be better.
iPhone 11 pro. I got these tags
50 x NTAG215 NTAG 215 NFC Stickers 100% Guaranteed to Work Perfectly with TagMo! (45 Pieces + 5 Bonus!) https://www.amazon.com/dp/B071ZZTT6T/ref=cm_sw_r_cp_api_i_345XDb7F83780
This is what I bought
Half Sheet Self Adhesive Shipping Labels for Laser & Inkjet Printers, 200 Count (BL-G8511-100) https://www.amazon.com/dp/B001PF1BSE?ref=yo_pop_ma_swf
these work beautifully
50 x NTAG215 NTAG 215 NFC Stickers 100% Guaranteed to Work Perfectly with TagMo! (45 Pieces + 5 Bonus!) https://www.amazon.com/dp/B071ZZTT6T/ref=cm_sw_r_cp_apa_i_Ojz3DbHDMSSVB
Coin Capsules Round Plastic Coin Holder Case with Storage Organizer Box for Coin Collection Supplies (27 mm, 100 Pieces) https://www.amazon.com/dp/B07CNTTVF9/ref=cm_sw_r_cp_apa_i_Vlz3DbNKBS6RK
I also used Tagmo and NFC Bank.
No bad ones yet!
Yep! Pieces are XPS and painted with mini/acrylic paint (My first time using XPS, but I think I managed). The cards are actually regular, old Bicycle playing cards. I modeled up the card face in GIMP and printed them onto sticker paper, cutting out the stickers, sticking them on and trimming the edges.
I do this but use circle sticker paper so I don't even have to cut anything or show any signs of artistic skill.
Something like this: https://www.amazon.com/1-inch-Diameter-Labels-Inkjet-Printers/dp/B01DE56YXO/ref=sr_1_fkmr2_2?ie=UTF8&qid=1504720857&sr=8-2-fkmr2&keywords=printing+1%22+circle+stickers+avery
Just had the same thought, then I found this https://smile.amazon.com/InStockLabels-Voted-Stickers-Apparel-Adhesive/dp/B017BUT8PE/
http://www.amazon.com/gp/product/B001PF1BSE/ref=ox_ya_os_product_refresh_T1
200 for $7.95 with free prime shipping.
Ok, sounds reasonable. Would it be fine for me to just use a thermal dymo 450 printer for product labels for now and just an inkjet with self-adhesive sheets (https://www.amazon.com/gp/product/B001PF1BSE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1), for the shipping labels?
I have a DYMO 450 turbo also and I mainly use 30334 size labels. Both Amazon and Inventory Lab will print this size.
***
>I've seen a lot of people basically taking snapshots on every label from a 30sheet which seems kind of wonky.
If you want to use the Dymo with Amazon directly you need to use Amazon's
Scan & Labelpage. Inventory > Manage FBA Shipments, then near the top of the page look forScan & LabelIt prints out labels for one SKU at a time.
Since Chrome changed, it's a little more difficult but you pick the product you need a label for by scanning it or entering your SKU. Then you can either print it or save it. If you print, the chrome print window opens and you need to play with settings to make sure the label fits.
print using system dialogYou only need to do this for the first label.
Inventory Lab is a lot easier. You run the printer setup under account settings to choose your label size. Then you choose if you want the label to print automatically when you list an item, or only when you click the print button.
Keep in mind, you are suppose to use removable labels when applying directly to the products. That said, Amazon doesn't follow their own rule here and I've learned that the longer removable labels are on, the less removable they are.
I've used a few label brands.
***
As far as printers: I use the Dymo 450 turbo and brother laser https://www.amazon.com/gp/product/B00LZS5EEI/
I use the laser printer for shipping labels mostly but sometimes for product labels if I'm sending like 80 of the same thing.
I spent a lot of time when I started, trying to decide what printer to get. I started with the laser because: 1. I can use it as a regular printer for non-fba stuff, 2. It will print both fnsku and shipping labels, 3. It is really inexpensive.
I added the DYmo later because: 1. I hated all the wasted labels if I wasn't printing a full sheet, 2. I do RA and matching labels from a sheet with 30+ different products is time-consuming, 3. I often need 1 or 2 labels and it was difficult to do on the laser.
I haven't looked in awhile but my dream printer would be a thermal transfer printer that is large enough to print shipping labels as well as fnsku. I just can't justify spending $500 on it.
I bought a 100 pack of sticker paper that are the size of regular paper sheets off amazon for $12. I printed on them 5 star reviews help deliver food to your family and ours with IC logo and a picture of 5 stars. It looks nice. I fit 6 on a sheet and slap one on the outside of the bag with the delicate items in it.
I called IC and asked if it was ok to do and the lady said I don't see why not.
2 weeks later all of a sudden the in store oppers at wegman's have new stickers and they have to put them om 1 bag per order that are very simliar to mine.
I definitely noticed a little difference and get more ratings. 600 stickers for $12, well worth it.
People sell preprinted stickers on etsy too, but my way was cheaper and my stickers are bigger and more noticeable.
In case anyone wants the sticker paper....
https://www.amazon.com/gp/aw/d/B06WVYGWMD?psc=1&ref=ppx_pop_mob_b_asin_title
You can use Brady tags on your wires behind devices. Also label them at the panel. Here is what a book of them looks like. http://www.amazon.com/gp/aw/d/B003X26Y4I/ref=sr_sp-btf_title_1_4?qid=1394579345&sr=8-4
You could even go far enough to label the face plates but I think that would look pretty ugly in a home.
Buy bulk peel-and stick labels. I like the half-sheet ones... Fba splits their labels in 2 and usps on eBay lets you print a half-sheet.
http://www.amazon.com/gp/aw/d/B001PF1BSE/ref=mp_s_a_1_1?qid=1404349532&sr=8-1&pi=SY200_QL40
These are the exact ones I purchased to get the extra goodies in BOTW:
https://www.amazon.com/gp/product/B071KTC2J6/
My son is 14 months old and in daycare, and at this age the only things we bring are diapers, wipes, and extra clothes. We use these Avery labels and love them.
I like to write people nice notes with this 8.5x11 sticky paper. Just to make sure they see them, I stick them on the driver side window. Sometimes I leave multiple notes - just to make sure my message gets across.
https://www.amazon.com/gp/product/B01DJBMLV2/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
I used these and they're batting a thousand right now, as none have failed or had an error.
https://www.amazon.com/gp/aw/d/B071ZZTT6T?psc=1&ref=ppx_pop_mob_b_asin_title
I still use a regular printer. Thermal printers are nice, but I didn't have 200 bucks to spend on a printer.
Invest in some label paper. It'll save tape and time. Here's what I use
https://www.amazon.com/gp/product/B001PF1BSE/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Oh I see. Well, you cannot really go more shallow than "1" I assume. After I cut, I can pull the page off of the bed and remove the stickers individually from the sheet. I believe it scores through the backing some but not enough for the whole sticker to fall out.
It may be a case of the media not being completely appropriate for your needs. I've been happy with
https://www.amazon.com/gp/product/B000VKV2H4
and they are cheap-ish. I just bought a 10 pack of
https://www.amazon.com/gp/product/B01FKXOJOY
but have't tried them, yet.
I use these knock offs:
http://www.amazon.com/gp/product/B00CBAPJ30?refRID=W4SDKAP2NV9513AHKTYR&ref_=pd_cart_rp_1_2
I use these: https://www.amazon.com/gp/product/B0069RY9BY/ref=ox_sc_sfl_title_4?ie=UTF8&psc=1&smid=A3DDEVBY0MMX5J
These seem to confirm that impression.
For boxes < 1 pound, definitely ship first class. You can use PayPal for shipping labels - http://www.paypal.com/shipnow is a easier user interface if you're just shipping one package, but check out http://www.paypal.com/shipping for PayPal's multi-order shipping (it's less straightforward to use, but meant for lots of shipments). If you don't have them already, I'd highly recommend getting some sticker labels to print on due to the quantities you're sending out - I picked up these on Amazon awhile ago, but there are lots of different sellers.
I don't see a problem with the mylar bags. When I've shipped yarn in mylar bags, I've put it inside of a ziploc for extra insurance, but I've received lots of yarn and fiber in mylar bags and have never had an issue with them being torn up. If you're sending anything internationally, you might want to beef up the packaging a bit (double bag?).
I have moved from Avery Labels (their software is really good) to Neato labels. I have to cut them out after they are printed but holy shit do they look good.
See my PM, but the direct answer is the digital document of stickers in a PDF form. Any printing of the PDF you'd need to manually cut out. This is what I did and prefer. The wheels are the hardest part due to the curves, but as they are black on black with quality sticker vinyl paper it's not noticeable if they are not perfect circles. The goal as you say is to avoid the White part. There are 5 wheels on the sticker sheet themselves when you only need 4, so there is room for "error" both in cutting and application.
I recommend these to print the stickers on; Neato-Blank-Full-Sheet-Labels/dp/B01FKXOJOY on Amazon.
Refer to this reddit thread for the file
Regarding paper to use, it depends on what you want to do. I've seen people simply make the entire thing from basic computer paper and sleeve cards when necessary.
I personally printed on this, then stuck them to pieces of cardboard to add more weight. Pieces now resemble the One Night Ultimate Werewolf role pieces.
https://www.amazon.com/Voted-Stickers-Labels-diameter-labels/dp/B00I2TPC0O
For the many potheads out there who are too lazy to even vote