Best oscillating power tools according to redditors
We found 46 Reddit comments discussing the best oscillating power tools. We ranked the 24 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 46 Reddit comments discussing the best oscillating power tools. We ranked the 24 resulting products by number of redditors who mentioned them. Here are the top 20.
Is that like a heavy duty Dremel?
I would have used my oscillator.
ok so i'm an unemployed carpenter, so i'll tell you how i would do it cus i'm bored.
new drywall: dead easy, take a piece of the flooring, sit drywall on that, and bam you're good. floor will slot right in. add a tiny shim to make it easy.
existing drywall: you need to buy a flat-cut, a multi-tool, this fucking thing. you're gonna take a piece of that flooring, use that as the guide. cut the drywall out. you're going to run into nails or screws, but multi-tool blades are kinda cheap, so buy a bunch. use the right one (bi-metal). ok so now you have a 3/4" or whatever gap to slip the flooring into. it's going to be ugly unless you are reallllly good. "caulk and paint make a carpenter what he ain't"
just put baseboard, it's so easy.
Best? Fein. Hands down.
However, it is hard to justify the cost over the many, many knock offs available. In my opinion, it really isn't $250 better than the Porter Cable, or the Rockwell, or the DeWalt, or...
A good drill is key. It's silly to stick to one brand (many people have the bs brand loyalty fetish and I'm not sure why). You'll also want to get a variety of drill bits to go with drill. Go to garage sales and start hoarding nails, screws, etc at cheap prices.
My recommendations below are based on at least 5 hours of research and shopping around. There are some things I'd probably add to the list (like a hand saw and dremel) but this takes care of a lot of your big needs. I own everything on the list and am pleased with it all, especially in terms of a performance for value ratio.
The key is know what you want then shop around / wait for the best prices (track prices in spreadsheet). Use google shopping to compare prices and see who price matches plus has best ebates or Ibotta cash back % + consider buying gift cards at a discount on Raise or elsewhere to further maximize savings (or just go with whatever credit card gets best points on particular site). Add Google Chrome app "Honey" to have coupon codes auto applied (eliminates time searching for them).
Also, I'd strongly consider getting a credit card with a decent bonus that will essentially help you get these items for free (assuming you can achieve the bonus spend with money you're already paying on existing bills / monthly purchases - it's a no-brainer in this case) - Chase's Sapphire Preferred is a good place to start ($500 bonus for 4K spend in 3 months)
Consider waiting until Black Friday (and from Jan to end of feb) for the good deals.
Drill (get a decent to really good one - you'll use it often)
Circular Saw
Multi-tool
Miter saw
Respirator
Horse (the 'roided out version)
Sander (makes a huge difference): I've seen it in the low $40 range
Off the top of my head:
Indoors:
Wire cutters
Volt meter
Chisel
Nail Punch
Power Drill
A good selection of bits for the drill
If your power drill is battery operated, a second battery for the drill
Levels (get one large level and one small torpedo level)
Stud Finder
Extension cords
A powered multi-tool like this
Spackle
Wrenches
Drain snake
Caulk gun
Plumber's putty
Paint brushes and other painting implements
Step ladder
Small trash cans for rooms like bathrooms and offices
Floor mats for bathrooms
A diverse selection of:
Outdoors:
Largely dependent on your yard situation, but I would recommend:
A small wheel barrow
Leaf rake
Bow rake
Shovel
Tarp
Rope
2x small gas cans - one for 2-cycle gas, one for regular gas
Weed whip
Lawn Mower
Extra weed whip material
Hand saw
Branch clippers
Bush trimming shears
Work Gloves
Leaf blower if you have any significant level of foliage on/around your property
Large shop broom
Shop vac
Large step ladder
Weed pulling tools
Fuel stabilizer
Quart of motor oil
WD-40
Wrenches for maintenance on your yard machines
Pry bar
Socket Wrenches (3/8" and 1/2")
Sockets to fit your socket wrenches
Outdoor trash can and trash bags
Some kind of work bench
C-clamps
Vise
Bench grinder
Saw horses
A couple of spare 2x4 boards
Tub/trash can for holding most of your yard tools
Shelving, tool box, and organizational units for holding all of the miscellaneous things you'll accumulate
An oscillating multi-tool with a cutting head and then judicious use of a chisel/screwdriver and hammer would let you cut a little into the jamb, letting the new flooring go under it a bit to hide the ugly cuts. (the same thing could be accomplished with a flush-cut saw if manual is your style)
You could also get a profile/contour gauge and use that to duplicate the jamb shape exactly and transfer it onto the tile and very, very carefully cut out the shape using a sharp knife. This method will be harder, of course.
DeWalt Fine/Multi Tool
Great for cabinet work, cutting drywall, notching studs, and practically any form of modification where you need a clean and quick cut but can only come at it head on.
I imagine far more useful for residential than not.
One of these thingies and a lot of patience? https://amzn.com/B005AZI12O
I have this set and it's fantastic price:quality. As far as non-power tools go, this covers pretty much everything I need around the house and working on my cars, except for a hammer and wonder bar. I think I remember buying it at Menards for $50 on sale.
I'm a huge fan of Hitachi power tools. Excellent quality for very reasonable price. Lifetime warranty. The 18v drill/impact combo is like $115 on Amazon.
The biggest helper of all the tools I own is the oscillating tool. I have this Porter Cable model that has served me veyr well, but ANY oscillating tool will do. Uses include: scraping up stuff like old stick-down tile (with a scraper blade), cutting holes in things like drywall where a utility knife would be a lot of work, removing old caulking (scraper blade again), small cuts on things like trim, sanding into corners (such as when refinishing a hardwood floor), and the list is basically infinite in my mind.
Other handy homeowner power tools include (in order of my preference) an air compressor, angle grinder (be safe with it!), bench grinder (sharpen your own mower blades, etc), reciprocating saw, and circular saw. The last two are more useful if you're doing more DIY projects but the others are really handy to have all the time.
I use a multitool.
The triangle sand paper and backing gets the corner easy. It's a very useful tool for a DIYer as you don't need the kind of volume work like a contractor. It replaces several other power and tools. It also can cut things at weird angles and crevices no other tools can.
Oscillating tool like this or similar...
https://www.amazon.com/PORTER-CABLE-PCE605K52-Oscillating-Multi-Tool-Accessories/dp/B00F9TE06M/
Jeezlus, you sure do pay for that Hitachi brand name on your choocher. Although I guess the extra chooch-factor and the rubberized grip kind of even it out.
You could run the blade of an oscillating tool between the joints.
http://smile.amazon.com/Black-Decker-BD200MTB-Variable-Speed-Oscillating/dp/B005AZI12O/ref=sr_1_15?s=hi&ie=UTF8&qid=1413163052&sr=1-15&keywords=multi+oscillating+tool
Here you go!
I've modified probably 100 of these cases for NES carts.
If you can borrow one of these from someone I think it's the best way to do it. This will cut those extra tabs very easily.
https://www.amazon.ca/PORTER-CABLE-PCE606K-Oscillating-Multi-Tool-Accessories/dp/B00L47A9CC/ref=sr_1_3?ie=UTF8&qid=1549292444&sr=8-3&keywords=oscillating+multi+tools
If you already have M18 batteries and charger you can buy just the multi tool with no battery or charger for $100. Although if you think you could use another battery that kit you are looking at is a better deal.
https://www.amazon.com/Milwaukee-2626-20-Cordless-Orbiting-Woodcutting/dp/B00I3PNFVK/ref=sr_1_1?ie=UTF8&qid=1539114825&sr=8-1&keywords=m18+multitool
a. ImageReflectors shatterproof mirror because it's way harder to check your teeth/eyes/nose with a front facing camera for some reason
b. Base Set 2 Meowth card for sentimental and slightly superstitious reasons
c. lense cloth cleans glasses better than the handkerchief
d. Dunlop tortex 1mm a similar case to the lighter I have a pick in my mandolin case that I like better and I think dunlop discontinued and I refuse to use one for guitar unless my hand is bleeding but there's always someone who needs one.
Wet sanding with an oscillating hand sander works well, just go slow. If you need to do detail work, I haven’t found anything better than this:
Proxxon 28594 PS 13 12-Volt Electric Pen Sander, Micromot NG 2/S AC Adapter https://www.amazon.com/dp/B01LWK9ZJX/ref=cm_sw_r_cp_api_i_n4ntDb0NMP2XA
Edit: this is the hand sander I have. I like the battery powered because it melts the plastic less because it’s less powerful
Ridgid ZRR9700 12V Cordless JobMax Multi-Tool with Tool-Free Head (BARE TOOL, Battery and Charger NOT included) (Renewed) https://www.amazon.com/dp/B01AXIS0FA/ref=cm_sw_r_cp_api_i_u7ntDbBJH95YG
HAWKFORCE 12V MAX Cordless Multi-Purpose Oscillating Tool with 6 Variable Speeds, Quick Release Blade Replacement and 38 Piece Accessories Set MultiTool Kit for Grout Removing, Scraping, Cutting https://www.amazon.com/dp/B07KXQ3HHD/ref=cm_sw_r_cp_apa_i_fsqVDbZ8SJ2HG
I bought this and it works great!! Love using and my coworkers love it as well. Those who dont have a grinder constantly ask me to use mine
Looks great! If you ever do them again, or need faster production, I used a Bosch vibrating multitool with a fine-tooth blade to cut phone books like this. It was easier if I clamped at least part of it between 1x4 boards, but it wasn't necessary. Great gift idea!
I moved in to my first house about a year ago. Flippers had it before we moved in, so there were lot's of things to fix. I personally recommend buying tools as you need them, and getting flexible ones. An oscillating saw is one of the handiest tools I've ever used. One like this will tackle many projects I tend to go with tools that have the best reviews and longer warranties. Ask three different pros and you're likely to end up with three different brand recommendations.
Be glad you didn't. I too believed this...
When i was in college I built a coffee table using only a dremel. The tool is essentially worthless, it took me a over a week to cut just a few holes. You need a jigsaw or a reciprocating saw for this job glad you got one. I would have recommended This
From easiest to last resort:
--Use a deep socket with extension to remove the nuts.
--Use oscillating tool to cut nuts.
–Use drill and drill bit to drill out the nut.
--Use basin wrench
Oh yes, you will need the correct tile blade. That sort of tile isn't as tough as it looks.
I have the corded Porter-Cable and did this exact same job ~3 months ago. (fixing prior owner "jobs").
https://www.amazon.com/PORTER-CABLE-PCE605K-Oscillating-Multi-Tool-Accessories/dp/B008V4NFC2
Others are all basically similar. Loud as heck - wear ear plugs. Put down some tape to protect the counter and find the correct angle and it will cut in there just fine.
> https://amzn.com/B005AZI12O
Swap the blade for one of these guys:
http://www.harborfreight.com/3-12-in-high-speed-steel-multi-tool-half-moon-blade-61815.html
They each have their purpose. For less than $200 you can have all 3.
https://www.amazon.com/Skil-5480-01-Amp-4-Inch-Circular/dp/B000P9H4VO
https://www.amazon.com/PORTER-CABLE-PCE345-6-Amp-Orbital-Jig/dp/B00OZEUL7Y
https://www.amazon.com/PORTER-CABLE-PCE606K-Oscillating-Multi-Tool-Accessories/dp/B00L47A9CC
Possible, but if your nose is not lying to you, then the floor of the cabinet would need to be removed so an inspection could be made. For all you know, there may be mild or mildew in that dark damp space.
Cutting out the cabinet bottom would be easy with an oscillating tool:
https://www.amazon.com/Genesis-GMT15A-Multi-Purpose-Oscillating-Tool/dp/B003H054RY
Oscillating Tool
~$100
This is seriously the most used power tool I have. For whenever you get into those situations where it's "how am I going to make this work?" This tool has got me out of more trouble than I can count. Perfect for any kind of remodel/repair work.
I like the Rockwell because they work with any standard blades.
https://www.amazon.com/gp/aw/d/B01HD4EQTG
> https://www.amazon.com/gp/aw/d/B01HD4EQTG
I'll 2nd that question. I've seen oscillating tools a few times now. What's the last project you used it on (or the first one that comes to mind)?
That's still almost twice as much as the Genesis. I've beaten the heck out of mine and it's never given me a problem. Save your money for blades.
A $25 floor scraper will work much better than a shovel for removing the bulk of the material. If you find stubborn spots, follow it up with a $40 oscillating tool to make short work of it. Don't buy a more expensive one, for what you are doing, it will work just fine.
Be sure to clean and seal the concrete after removing the tiles!
So I figured it out. If you add 2 items that are "Prime Day Deals" and it takes both to get you over $100, then it will apply the double discount. So doing the 36-accessory kit you bought, which was >$100 to start, I could only get it to a single discount. But if you start with something like the $88 11-accessory kit and add another Dremel "Prime Day Deal Item" (look for blue banner) to put you over $100, say the $23 Accessory Kit, then you will get double the discount. I see those 2 things combined (once going to checkout, $112 in just the cart) as $75.40 in checkout. I hope you get this in time to cancel your old order and get the extra deal!
Makita XMT03Z 18V LXT Lithium-Ion Cordless Multi-Tool, Tool Only https://www.amazon.com/dp/B00LIV11RG/ref=cm_sw_r_cp_api_i_YWBTDb9YDEX4V
Yeah, besides super specialized saws I've never heard of an oscillating tool would get it done and be safe about it too.
Here's the cheapest one I could find. http://www.amazon.com/Chicago-Electric-Power-Oscillating-Multifunction/dp/B0074JTRIQ/ref=sr_1_13?s=power-hand-tools&ie=UTF8&qid=1457779462&sr=1-13&keywords=oscillating+multitool
Ohh, like this? I also have one of those, but I don't use it for drywall. I use the first thing I posted for drywall, I use this other thing for undercutting door jambs, cutting nails off to get new work boxes out, etc.
Ah, Kreg. My gf's birthday is just before xmas, so she often gets big combo present packages. This year she had a VERY Kreggy Christmas -- K5, shelf pin jig, tons of screws, extra bits, clamps, etc. Basically, lots and lots of blue plastic cases. I have never heard her squeal quite so much over any present I've gotten her.
The alternative was this Fein Top Kit. She was much happier with her Kreg ensemble. She's been dancing her Kreg jig ever since.
She just finished cutting and sanding the planks for her new kitchen cabinets. We've got to use my fancy router bits on some rails, but then ON TO THE KREG JIGGERY!
Is this a better deal/tool than this Porter Cable tool?
PORTER-CABLE PCE605K 3-Amp Corded Oscillating Multi-Tool Kit with 31 Accessories https://www.amazon.com/dp/B008V4NFC2/ref=cm_sw_r_cp_apa_6QWYzb838HR3C
are we talking multi tool like an oscillating tool like this? cuz i own this and its everything you would expect
https://www.amazon.com/Milwaukee-2626-20-Cordless-Orbiting-Woodcutting/dp/B00I3PNFVK/ref=sr_1_1?ie=UTF8&qid=1525388675&sr=8-1&keywords=m18+fuel+oscillating+tool
If you use them enough these are a life saver. They bevame a go to for myself on site.
PORTER-CABLE PCE605K52 3-Amp Oscillating Multi-Tool Kit with 52 Accessories https://www.amazon.ca/dp/B00F9TE06M/ref=cm_sw_r_cp_apa_oxkJybWRC15WV
I have this one:
http://www.amazon.com/Bosch-MX25EK-33-120-Volt-33-Piece-Oscillating/dp/B004L9JZTS/
My sister has the Harbor Freight one:.
http://www.harborfreight.com/power-tools/oscillating-tools/variable-speed-multifunction-power-tool-67537.html
They make one that only cost $20, it's shit. The $40 one works just fine. Not sure how long it will do so.
I think I'm going to buy this one:
http://www.amazon.com/DEWALT-DCS355D1-Lithium-Ion-Oscillating-Multi-Tool/dp/B00FAU8FOS/
Wanna buy my bosch? lol
If you have Bosch 12v then why not just get the Bosch multi-tool? If you'll be using it a lot, like for woodworking or lots of installation, then IMO it's worth going for the best like Fein. If it will be an occasional use thing for random minor projects then TBH any of the options will be just fine.
I had a Fein Multimaster and it was annoying to have to find an outlet and/or trail a long extension from another room. It's one of those tools that I always seemed to use in inconvenient, out of the way places, so if (when) I buy another multi-tool it'll definitely be cordless... probably the Milwaukee M12, since that's the system I'm invested in.