Best protective shields according to redditors

Buy a roll of 3M paint protector film and cut your own.

http://www.amazon.com/Scotchgard-84906-Urethane-Protection-Length/dp/B000PF1PFO

Oh wait, buying quality film uncut in bulk isn't significantly cheaper than a ready-made one? Shit.

Auto parts store would have it. I got mine from Amazon.

EVERYONE - get your rocker panels clear wrapped. I had that done and my rocker panels look perfect. You can do it yourself with this: https://smile.amazon.com/gp/product/B004VG8DS0/ref=ox_sc_saved_title_6?smid=A10111992WJRYRFBZH9IS&psc=1

rain proof film: (https://www.amazon.com/dp/B07JM84Y9Z/)


larger size for windows: (https://www.amazon.com/dp/B07SZN6WNJ/)

As others have recommended before, cut protection film to protect the right hand side or (more work) the whole surface. Or pick up any of many 3rd party inserts to overlay and then change out with your whim.

Here's a simpler solution https://www.amazon.com/3M-08582-Door-Edge-Protection/dp/B00650NY6G/ref=sr_1_3?ie=UTF8&qid=1537293631&sr=8-3&keywords=3m+door+edge

I got this: https://www.amazon.com/gp/product/B004VG8DS0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Enough to do a whole bike and have spare to do repairs to any that rips in the future.

Yes! Got it on Amazon!

I hope you have something between the tail section and those bags. Otherwise that pearlescent paint is going be get rekt.

I'd recommend something like this 3M film roll or at least some gaffers tape.

The last time I used a mag mount for long term use I used a piece of this to protect the paint...

Is this what you bought? Does it let you peel them off later with relative ease?

3M Clear Paint Protection Vinyl Film 6" Wide Choose Your Size Including Tools (6" x 25") https://www.amazon.com/dp/B01LZYSXZJ/ref=cm_sw_r_cp_api_vKrSAbW36KB4M

Ive noticed some slight rust on suspension arms and such, probably going to spray everything with fluid film, which we use on pretty much everything outside that is metal to protect..

Love this stuff...
https://www.amazon.com/Fluid-Film-11-75-Spray-2-pak/dp/B008T8CXGY

I use little pieces of 3M Scotchgard film to protect my frames from cable rub around the head tube. You can find it in larger or smaller quantities and cut to size. You can buy it on Amazon here.

Hmm this is a tough one to try to jury-rig because of the damage to the handle and how far you are from the shop.

If you were my insured I might tell you to email a bunch of pictures to the shop. They might actually have another door shell lying around that they took off another Model 3 that might be bad but might work as a temporary substitute until your parts are in. It's possible also that they might be able to drop in a replacement glass into your damaged door, though that would depend on whether the regulator is damaged and whether they can get the door to open and close with the handle in that condition without having to cut it out.

In the meanwhile you can get some crash wrap from a local body shop or an auto parts store (though a whole roll is like $60-$70) which will at least let you drive it around at highway speeds and will keep the rain out. It should even work to seal-up the headlamp if it's still working.

In the meanwhile, after the insurer/shop has had their look at it, get some cheap paint and do this, or put one of these giant band-aids on it. Though if it was me I'd get a one-inch wide brush and some white paint and write "Tesla:1 Deer:0" on the door.

You can get pretty much get the same thing by way of helicopter tape but it's not in convenient strips. You'll need to cut helicopter tape yourself but will get a lot more of it - https://amazon.com/Clear-Paint-Protection-Choose-Including/dp/B01LZYSXZJ/ref=sr_1_5?ie=UTF8&qid=1522603230&sr=8-5&keywords=helicopter+tape

Probably the same but here's the link to exactly what I ordered:

https://www.amazon.com/gp/product/B01LXOPYQ4

This may be a terrible idea, but I was missing 3 out of 4 stickers on my Volt for 2 years without a problem on my commute on the 405. With the stories of the lax enforcement, I thought I'd chance it.


I sandwiched the HOV stickers between red tint and clear 3M PPF. I cut off the large borders and applied them.

Amazon.com carries it, although it isn't $8 a can (which I have never seen, it usually retails for around $12-15 a can up here in Canada). That said, I'm another fan of Fluid Film since it stays where it's applied, doesn't drip and it works damn well as a lubricant/rust inhibitor.

Btw you should really buy some scotchgard film (http://www.amazon.com/gp/product/B004VG8DS0/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc=1) and apply it where your rack's hooks and feet will be if you want to keep your car from scratches.

I've had at least one person recommend that product to me on this sub. I'll be getting my HOV stickers any day now, so I've been looking hard for useful tools like this.

I personally decided to just use some 3M PPF, though.

Thank you, this is my second choice.3M PPF I submitted my paperwork 1/1 hoping to get the HOV sticker soon.

Please report back how you 3M PPF works.

> https://www.amazon.com/gp/aw/d/B01LZYSXZJ?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2

Great idea with the paint protection. I was wondering about how I would eventually peel the sticker off (nightmare with the yellow decals and a Prius a few years back).

This is not a way of restoring the paint, but as a preventative measure: I use 3M paint protection film/tape on any part of my bike that I think may be at risk of getting scratches/scuffs. Only downside is if your bike has a dark, matte finish like mine does the film stands out. Though you can use that to your advantage and make subtle decals on your bike! Maybe you already know about this, and I'm not understanding what you mean by chain scratches.

http://www.amazon.com/gp/product/B00B3IXSMA?psc=1&redirect=true&ref_=oh_aui_search_detailpage

Tint:

https://www.amazon.com/gp/aw/d/B01GQRQ996?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2

3M Paint Protection:

https://www.amazon.com/gp/aw/d/B01LZYSXZJ?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2

The stickers have the white boarder. I bought some PPF and used it on the other big sticker in place of the one I had with Clean Cling. Without the white CC backer, it's definitely not as bright white and purple. But it's still ugly. I'm only placing one sticker on right rear.

I highly recommend buying some PPF and doing it that way. You can buy some on Amazon for $10.

I used this: https://www.amazon.com/dp/B01LZN1IK9/ref=cm_sw_r_cp_tai_OX.SCbC8CTE19

And used the method on this vid: https://youtu.be/O93p0Z9Eo2g

My only concern is whether small bits of sand will eventually work in between the flaps and the paint on the side of the car and cause really bad scratching. Might need to protect the paint underneath using some sort of protection spray or something. Maybe put something like this underneath it.

Took my car on one big road trip (by big I mean more than 7 hours each way of just driving) and got a rock chip :(


Ironically it was on the driver side door and not anywhere I was expecting a rock chip-was expecting a bunch of hood or front bumper chips but no, the damned driver side door got a chip somehow. Still need to go get the touchup kit.

I have the OEM rack and applied this clear vinyl to protect the paint:

3M Clear Paint Protection Vinyl Film 6" Wide Choose Your Size Including Tools (6" x 25") https://www.amazon.com/dp/B01LZYSXZJ/ref=cm_sw_r_cp_api_QXpUAbXF2GYHT

It's the perfect width I just cut the length to size. I followed this video and it came out great:

https://youtu.be/INJh3YE2MOs

You can actually buy rolls of clear 3m vinyl wrap on amazon in varying widths for way cheaper than these kits. I bought a roll of the .5" and 2" to put on a couple of my bikes to protect them from cable rub as well as just general nicks and scratches. Obviously not as thorough or custom fit as a kit like this, but it definitely helps. It's fairly stretchy so it conforms to frame contours pretty well, and after a few months of riding I haven't had any issues with peeling.

> It protects the paintwork

This is the point you need to pursue, not the color change aspect. Ask the adjuster what the companies position is on this stuff on vehicles. The reality is, the color change may be where they draw their line in the sand which could be problematic for you so you need to be talking about this from the standpoint of "paint protection". Also, did you have to do a physical inspection of the vehicle when you insured it? Ask them why there was no pushback at that time. However, none of this would change the handling/performance of the vehicle in any way and should not give them an out for liability purposes with regards to damages to the other party.

Use this under the pads. It works amazing.

3M Clear Bra Paint Protection Bulk Film Roll 6-by-48-inches

http://amzn.com/B004VG88MQ

Hi, I went with a different brand but same concept. I got this. I like that one of the reviews said it was easy to remove, which might not be great as a car hood bra but I won’t be driving the PS down the interstate anytime soon. I tested two strips on my regular PS4 and went on nicely, let it sit for 2 days and took it off pretty easily. I’ll update with pics later tonight or tomorrow morning, I think it turned out awesome. There is a little bit of tacky adhesive, but no enough to have left any residue after I removed the test strip.

If you need tips let me know.

Edit: forgot to mention.

There is about 1/2” on either side excess material, regardless of what direction you install, and of course more than enough the other direction since it’s a 5’ roll.

Pics

I came across a possibly cool solution for this.

Before installing the stickers, get some clear film like this

https://www.amazon.com/VViViD-Clear-Protection-Choose-Including/dp/B01LZYSXZJ

Apply the sticker to the film, and then trim the film closely around the sticker. Then, apply to the car.

When the time comes to remove it, the film will peel off the car. There may be a theft issue, but someone would have to know that the film was under the sticker.

3M Scotchguard tape. It's the same stuff they use for clear paint protection on cars.

https://www.amazon.com/Scotchgard-84906-Urethane-Protection-Length/dp/B000PF1PFO

I've got some on the underside of my downtube, on my top tube, ect. All the little places I expect impacts, to keep my purty paint and graphics intact.

Yes, get a kit from Amazon (KINGLAKE Auto Door Clip Panel Trim Removal Tool Kits for Car Dash Radio Audio Installer Pry Tool 4Pcs https://www.amazon.com/dp/B00HNMLQAG?ref=yo_pop_ma_swf) or wrap a flat head screw driver with electrical tape. Start from the front clip on the left and work you way towards the back. The right side also has a front clip near the windshield and you have to work your way from back to front.

Also- get 3M clear auto tape to put under the mount feet(3M Clear Scotchgard Paint Protector Vinyl Wrap .5" Wide Tape Roll (.5" x 48") https://www.amazon.com/dp/B072KF647X?ref=yo_pop_ma_swf) to prevent scratching the paint.

I want to say I used a 3/8”bit to drill through the roof gutters. Bought new bits so they were very sharp.

I highly recommend an electronic torque wrench.
The mechanical ones are very inaccurate at the bottom end of range. Head bolts are often at the bottom or below what they can even be set to.

I use this one and it works amazingly well. It can accurately go down to 3ftlb. You can set the desired torque and it has a beep alarm as you approach, reach, and go over the threshold. https://www.amazon.com/gp/product/B004VYUKTC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


I also recommend flying with a very basic set of tools. I fly with some hex keys and wrench that fits all the sizes on my paramator. https://www.amazon.com/gp/product/B01F512F74/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


Siphon is nice to get fuel out of paramotor. This one works amazingly for me. https://www.amazon.com/gp/product/B07CKW15ZS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


Radio chest harness. https://www.amazon.com/gp/product/B007HJKSG8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I added a draw cord to attach my phone to. Phone then tucks into the velcro pocket and is secured by one of these: https://www.amazon.com/gp/product/B01H4E9Z6O/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 It's powerful enough to draw in a medium weight phone.


Hook knife: https://superflyinc.com/products/jack-the-ripper-hook-knife


Power floats: https://glidersports.com/shop/powerfloat-2bsure/

Waste flotation: https://www.amazon.com/gp/product/B013RLI9XS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1


Cut prop tape strips out of this: https://www.amazon.com/Scotchgard-Clear-Paint-Protection-60-inches/dp/B004VG8DS0/ref=sr_1_9?s=automotive&ie=UTF8&qid=1534535837&sr=1-9&keywords=3m+scotchgard


RTV silicon to put on exhaust springs to reduce vibration fatigue: https://www.amazon.com/Rutland-500%C2%B0RTV-High-Silicone-Black/dp/B000H5Y6CQ/ref=sr_1_5?s=home-garden&ie=UTF8&qid=1534352404&sr=1-5&keywords=heat+resistant+silicon+rtv


Motor tachometer: https://www.amazon.com/gp/product/B01GTP6ORC/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1


Radio: I recommend the FT60 or FT65. The 60 model is tried and true and can also be modded to RX aviation band. FT65 has newer display and is cheaper having been made in China.

https://www.amazon.com/dp/B0768LCCQ1/ref=cm_sw_r_sms_apa_i_02MIDbN70HMV5

Not black, but clear. I installed these with no issues and have been great.

You could fill them in with paint chip paint, it wont look the best but they won't be as noticeable and buy something like this to minimize the chance of it spreading/ happening again https://www.amazon.com/3M-08582-Door-Edge-Protection/dp/B00650NY6G/ref=sr_1_1?ie=UTF8&qid=1485937464&sr=8-1&keywords=car+door+edge+guards+clear .

Tape is way cheaper, but I just found out about this stuff from Matt on obsessed garage and thought it was pretty neat.

https://www.youtube.com/watch?v=r5OJhv22cPQ&t=624s

No kidding. Problem is that to get it professionally done is thousands of dollars. Function over form with these makes some sense.

3M Scotchgard Clear Paint Protection Bulk Film Roll 6-by-60-inches https://www.amazon.com/dp/B004VG8DS0/ref=cm_sw_r_cp_api_i_DU8nDb5T0NH0G

Buy some of this and a heat gun and cover up the more vulnerable parts of your frame. Leave the current ones as battle scars to give your bike character.

Better alternative (although costs a bit more than painter's tape)

https://www.amazon.com/TW4T20-Clear-Temporary-Protection-Tracwrap/dp/B01M5LEEB0

I'm going to order some right now, is this what you get? https://www.amazon.com/Fluid-Film-11-75-Spray-2-pak/dp/B008T8CXGY/ref=sr_1_3?keywords=fluid+film&qid=1559312675&s=automotive&sr=1-3

Is there a link on where to get the acrylic protector? I don't see any linked in the (now 11 month old) FAQ, nor have I found it on Amazon. I've found 3M tape that I'm considering though, and am open to ideas why it would be a good or bad idea.

Where are you located btw? I'm silver spring maryland

Also, full disclosure I was going to run some hill and speed tests versus a carbon GT with /u/Mr_Mahal before selling it just because we're both solid riders and he's making comparison videos.
We'd be putting some of this Bra stuff:

https://www.amazon.com/Clear-Paint-Protection-Bulk--25-inches/dp/B00B3IXSMA/ref=sr_1_2?ie=UTF8&qid=1467116917&sr=8-2&keywords=clear+bra+3m

On the new and shiny parts of the board stay looking new.

Ideally we would film on Saturday night or potentially thursday night if we can get comfortable with our boards enough to go full speed by then and if weather permits. unfortunate time for rain in this area lol.

Also for the test drive, I'd like you to either bring the $1050 for me to hold and sit there watching/helping you test ride or something like your phone & wallet as collaterall, just so you don't turn out to be a BB pro and ride off into the sunset :P

Second this, but for the sedan. So far I found this:https://www.amazon.com/Scotchgard-84906-Urethane-Protection-Length/dp/B000PF1PFO/ref=cm_cr_arp_d_product_top?ie=UTF8

Might help to protect the paint a bit.

https://www.amazon.com/gp/product/B01LZYSXZJ/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

You could probably use a clear film that they make for cars like 3M Scotchgard Clear Bra Paint Protection

It is crystal clear so it would show your stickers as they are and also protect them.

I like this idea.

Something like this might do the trick.

I saw someone mention this before

Or something like this https://www.amazon.com/gp/aw/d/B004VG88MQ/ref=mp_s_a_1_1?ie=UTF8&qid=1494603855&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=clear+auto+vinyl&dpPl=1&dpID=41MR34x8prL&ref=plSrch

This is stuff: https://www.amazon.com/gp/product/B004VG8DS0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

They sell it in smaller sizes for less. Even something half that size would be enough for a dozen bikes.

I used to sell my frames after riding for a couple years. That stuff helped keep the frames looking brand new.

Last question (I think).... this the stuff?

https://www.amazon.com/Scotchgard-84906-Urethane-Protection-Length/dp/B000PF1PFO

As many others have said, the black cushions do tend to wear out quickly and I stopped using them years ago. The thin, clear plastic ones are much more durable. And don't listen to the haters, it's totally normal to have a firm grip with your top teeth: biting with your bottom teeth is definitely not good for your tone and intonation, but just about every good player I know wears through mouthpiece patches eventually. And through the black rubber ones pretty swiftly.

That being said, I hate paying a bunch of money for clear plastic with an adhesive back. A mouthpiece maker friend of mine tipped me to a pretty excellent life-hack: use Scotchgard paint protector film and just cut off a little square every time you need a new patch on any of your mouthpieces. I bought one roll five years ago and I've barely made a dent in it. It'll last you for, like, ever. To me it's just as good as the clear Vandoren patches but for a penny a patch instead of a buck a patch.

That could work this too. It protects cars from rocks, salt, snow, scratches pretty much everything.

3M Clear Paint Protection Bulk Film Roll 6-by-25-inches https://www.amazon.com/dp/B00B3IXSMA/ref=cm_sw_r_cp_api_i_q6yBCb83CJ1EW

I have this on my bike as well. though only on the top tube. My chainstay is wrapped in 3M carbon fiber-textured vinyl wrap.

Becareful when applying it, it will bubble if you don't get an applicator. You can use IPA (rubbing alcohol) as a lubraicant instead of buying dedicated stuff though.

This is the one I used (similar to benben's)

http://www.amazon.com/gp/product/B000PF1PFO/ref=wms_ohs_product?ie=UTF8&psc=1

Not hard at all. Just follow the directions and don't overtighten. I will say the clear protection film they provide is garbage. Get some 3M stuff. I used this: 3M Clear Bra Paint Protection Bulk Film Roll 6-by-25-inches https://www.amazon.com/dp/B00B3IXSMA/ref=cm_sw_r_cp_apip_pSAV9rI8JS9Xj

Link to my review: https://youtu.be/gLkrROcURQA

If you're anal enough, you can put the 3M clear bra shit over the top of your tail fairings. A 6x60" roll will only set you back 18$. I find that no matter how protective manufacturers are of the bottom of their luggage, it's never enough.

https://www.amazon.com/Scotchgard-Clear-Paint-Protection-60-inches/dp/B004VG8DS0

Automotive wrap made to protect paint will work great for this application:

https://www.amazon.com/VViViD-Clear-Protection-Choose-Including/dp/B01LYZJNWX/ref=sr_1_16?crid=U3G29JIHPAYQ&keywords=clear%2Bvinyl%2Bwrap&qid=1555376619&s=gateway&sprefix=clear%2Bvin%2Carts-crafts%2C159&sr=8-16&th=1

That's cool. I use gadgetwraps even though it's quite a rip. I think the protectors are the same material as this: https://smile.amazon.com/gp/product/B00B3IXSMA/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1 I bought it for my car and did a wet install and was like, "this is exactly the same thing that I do and use with my smartwatches." I could make like 168 protectors off of a sheet that size. But I could never cut it to exact watch screen dimensions and would be too lazy to draw mario.