Best smartwatch cases according to redditors

We found 378 Reddit comments discussing the best smartwatch cases. We ranked the 107 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Smartwatch Cases:

u/TheLedgend · 33 pointsr/samsung

Amazon, it's a stick on piece of stainless steel, looks like it was part of the design once in place and is very secure. Very pleased with the look once I got the new stainless band and bezel, now looks like a stylish dress watch. I have had plenty of people surprised it's a smart watch.

https://www.amazon.com/Ringke-Frontier-Stainless-Protection-Accessory/dp/B07LGV5XHW/ref=mp_s_a_1_4?ie=UTF8&qid=1549581802&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=galaxy%2Bbezel&dpPl=1&dpID=51KFtq95dIL&ref=plSrch&th=1&psc=1

u/The_Penaldo · 11 pointsr/GalaxyWatch

Galaxy Watch Active 2 44mm

Watch Face: Simple Modern Watch Face - Minimal Full Date
http://apps.samsung.com/gear/appDetail.as?appId=com.watchface.simplemodernwatchfaceminimalfulldate

Band:
V-MORO Leather Band Compatible with Galaxy Watch 42mm Bands with Black Stainless Steel Buckle for Samsung Galaxy Watch 42mm R810/Galaxy Watch Active 40mm R500 https://www.amazon.com/dp/B07MZJ56QS/ref=cm_sw_r_cp_apa_i_fmb1DbGMJF4T4

Bezel Ring:
Ringke Bezel Styling Cover for Galaxy Watch Active 2 44mm (2019) Case Bezel Ring Adhesive Accessory - Silver (GW-A2-44-09) https://www.amazon.com/dp/B07Y2P664F/ref=cm_sw_r_cp_apa_i_Nmb1DbEKZ93HB

(non affiliate links I think?)

Backstory: I have been a watch guy but had no interest in a smartwatch, and actually disliked the idea of them up until fairly recently. Unfortunately, I broke my daily wear (A Nite Marquess) fairly badly, and was crushed by the wait time to get it fixed. So, I decided to give a smartwatch a try for a few months and given I'm a big Samsung guy, the Active 2 was a no brianer to match my S10. I immediately liked it and after picking up a leather band and the silver ring bezel for some accent flair, I am absolutely in love with it. I don't think I could go back to my "dumb" watches for daily use anymore.

Bonus shot with a 3D printed case meant to help charging (NOT my design, credit to u/often_wears_pants):

http://imgur.com/gallery/nTXH2xH

u/MysteryStep · 9 pointsr/AppleWatch

I just picked up the S4 SS 44mm. I work in an industrial setting so I need to have a case on my Apple Watch. These two fit the bill and look pretty good considering. I didn’t wear a case on my Series 0 SS 42mm and it got pretty beat up on the SS. It never got a scratch on the face so I’m not too worried about that but I want to protect the SS from scuffs this time around.

Spigen Thin Fit

Spigen Rugged Armor Works

u/ehampshire · 8 pointsr/vinyl

If it's your first TT and you're just getting started, /r/vinyl recommends this one. I've been happy with mine, although I do plan to upgrade in the future. If your budget is a little higher, I've heard good things about this one.

The one I plan on eventually getting is this guy.

u/vitorizzo · 6 pointsr/AppleWatch

This is my favorite case because it's not too big but it offers pretty good protection.

https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_api_H1ojzbT7YZWDN

u/ben3219 · 6 pointsr/AppleWatch
u/redhatch · 6 pointsr/AppleWatch

Cases get a lot of hate on this sub, but it’s your watch and you should wear it how you choose. I’ve used the Spigen Rugged Armor since getting my watch at Christmas and I like it. I personally do not think it adds any noticeable bulk to the watch. I originally had the case + band model, but the band didn’t fit my wrist very well so I got the case only and have been wearing it with the black Apple Sport Band the watch came with.

Link

u/UnturnedRock · 6 pointsr/GearS3
u/Biccc · 6 pointsr/GearS3

I think it's from here.

u/deepestcreepest · 5 pointsr/vinyl

Poor plan, the budget, that is. The orbit actually is a decent turntable and actually will produce a decent signal, so having it choke on $70 worth of junk will not give you your money's worth. I'd go for their preamp, or this one if you wanna keep it down. As for a headphone amp, if you're willing to try something different, go for this little bastard. Sounds great and will drive bigger badder headphones down the road.

u/HeartwarmingWarfare · 5 pointsr/AppleWatch

Some of the links are for 42mm items, but there should be 38mm items by the same seller too. Sorry, but I'm just copying from old comments I've made.

Most cases only protect the sides/body of the watch. You should get a screen protector and maybe a case too if you're worried about the sides/body.

Skinomi screen protector from amazon:
https://www.amazon.com/dp/B01H7WV1QU/ref=cm_sw_r_cp_api_bScCzb9QMKFDX

Great case, but it's bulky. It has a raised edge that MIGHT protect the screen a little, but I don't trust it so I still use a screen protector.
https://www.amazon.com/dp/B01N0QYUR4/ref=cm_sw_r_cp_api_USlEzbKN82J81

Had this one for a few months and they're great. They snap on easily and are tight and secure. Made of hard plastic type material.
https://www.amazon.com/gp/aw/d/B014HA8RG2/ref=mp_s_a_1_3?ie=UTF8&qid=1501106014&sr=8-3&pi=AC_SX236_SY340_QL65&keywords=fintie+apple+watch+case&dpPl=1&dpID=51S3Iq%2BGZIL&ref=plSrch

I wanted one that was gray to match my space gray watch better. They are really form fitting and thin and barely stick out from the watch at all. Made of rubbery TPU material.
https://www.amazon.com/gp/aw/d/B01MTUTMMG/ref=mp_s_a_1_8?ie=UTF8&qid=1501106149&sr=8-8&refinements=p_89%3AMonoy%C2%AE&pi=AC_SX236_SY340_QL65&keywords=Monoy&dpPl=1&dpID=511seG1-pPL&ref=plSrch&th=1&psc=1

u/ColoradoDennis · 5 pointsr/AppleWatch

My Smiling brand bumper + screen protector has served me very well in the gritty, sand-blast environment of riding a recumbent trike (the watch is 10-12” above the pavement and 2-3” from the right front tire). It lasts 3-6 months before needing replacement but protects my watch very well. It is, however, a “soft” case and might not withstand your work environment. It can be seen here:
https://amazon.com/Smiling-Apple-Watch-Screen-Protector/dp/B07JZ69XJ9/
Good luck in finding something that will work for you.

u/rutteh · 4 pointsr/vinyl

Personally, I'd say search through thrift stores for LPs and even a Turntable. I got my record player from a thrift store for $10 and it works amazingly, has for about a year now, the most maintenance I've had to do is buy a new drive belt and a preamp so I could actually turn it up to proper volume (all that was about a $60 total). I can't guarantee the same luck with you of course. But that's always the option if you want to go cheap and don't have much of a preference. There's also the internet of course too.

For records, again thrift stores are great. They're usually only a $1 a record. You will see A LOT of repeats in a thrift store record collection, but if you take the time to sort through it, you can find great things. Also the internet is a great way to finding local stores around you and a great way to buy records. I live in Massachusetts, and I buy a great bulk of records from Newbury Comics, seeing as it's closest to me and one of the very few places that has them around me. Buying directly from whatever artist you want also works, it's reliable AND you're directly supporting them and you can also get some pretty cool bundles and deals too! I also recommend Kung Fu Nation if you like any of the bands they support they usually sell LPs of albums they've released.

As for equipment, just find a reliable pair of speakers, I suggest buying a preamp (this is the one I bought and it's amazing. And when it comes to your turntable just be sure to keep everything in proper running order and maintain it.

I hope this helps, happy hunting!

u/MarmiteX1 · 4 pointsr/AppleWatch

I would get the Spigen Rugged Armour case 38mm/42mm and it's apparently it's got impact protection and is made of soft TPU that should protect the aluminium.

Apple Watch Series 1 Series 2 Series 3 Spigen, [Rugged Armor] [Black] Apple Watch 42mm Case Cover / Ultimate Impact Protection Protection from Drops and Impacts https://www.amazon.co.uk/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_gxAgAbX19VAAV

The reason I recommend this is because I have used Spigen cases on phones in the past and they don't scratch the devices from my experience. Some clear cases are subject to yellowing due to exposure from the sun.

u/IAmAfter · 4 pointsr/AppleWatch

LEO here. I bought a series 1 about a month ago and haven't had any issues. I sometimes bang my watch going into people's houses or any tight spots and it's still holding strong. A bunch of the guys in my command have Apple watches as well. Some without any protection and I haven't heard any complaints. I decided to use a Spigen case on mine. I bought this one https://www.amazon.com/dp/B00UVSOWBY/ref=cm_sw_r_cp_api_3iCSyb5ATT7K0

u/Brandonusprime · 4 pointsr/AppleWatch

Monoy wcase-c3 Apple Watch Series 2, 42 mm Case, Monoy New Design Slim Clear 2nd PC Hard Screen Protector for iWatch Series 2, 42 mm 2016 (PC Hard Cas https://www.amazon.com/dp/B01MTL6BRE?ref=yo_pop_ma_swf

Apple Watch Screen Protector (42mm Series 3 / 2 / 1 Compatible), Armorsuit MilitaryShield Full Coverage [2 Pack] Screen Protector for Apple watch 42 mm - HD Clear https://www.amazon.com/dp/B00UH3L82Y?ref=yo_pop_ma_swf

u/TrapdoorExplorer · 4 pointsr/AppleWatch

Spigen makes a great one thats minimal and secure.

u/JankClonk · 4 pointsr/AppleWatch

Could it be this one?

u/hbmtg22 · 4 pointsr/GalaxyWatch

I bought my 46mm LTE about 2 months ago ($380 brand new from Amazon). Prior to getting it, I purchased the Active 2 44mm to try it out since it was the newer watch. It's a very nice watch, and not to knock it, but I really didn't like the way it looked. It's a bit on the feminine side and just looks odd. I returned it the next day solely based off its design.

I have since purchased a Ringke bezel for my 46mm...it looked awesome to begin with, but the silver bezel just puts it over the top.
https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apa_i_Jc01DbQDW6JXV

I run 5 miles a day with it, and workout at the gym. It records (almost) everything perfectly. Plus, even with LTE on I get outstanding battery life. So not only is it a great looking watch, it is equally a great fitness tracker.

Honestly, this little piece of tech is one of the best purchases I've made in a long time.

u/e60deluxe · 3 pointsr/hometheater

and theres no bass and the treble is too high too, right? you need a phono pre amplifier.

http://www.amazon.com/dp/B000A36LQ4

pre amp goes in between record player and amp.

u/m00dawg · 3 pointsr/vinyl

I was looking at maybe something like this, just as a starter:

http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4/ref=sr_1_4?ie=UTF8&qid=1310354886&sr=8-4

Surely that, coupled with my D2 and the Shure cartridge will surpass my current cermaic-based (Soundesign) TT?

u/Umlautica · 3 pointsr/audiophile

Most turntables (including yours) output phono-level and need a preamp to convert to line-level using a phono preamp (like this). Some older receivers have one built into an input labeled phono.

u/Repsputain · 3 pointsr/vinyl

TCC TC-750 BLACK Audiophile Phono Preamp, Pre-amp (Preamplifier) https://www.amazon.com/dp/B000A36LQ4/ref=cm_sw_r_cp_awd_gvH6wbTERGMK9

u/Nsidious442 · 3 pointsr/AppleWatch
u/mfruckus · 3 pointsr/AppleWatch

I have this on my Apple watch and I'm pretty happy with it. It's not your typical screen protector but it does the job and I don't have to worry about it cracking as easily or coming off.

https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_apip_3yFQtY7onvlmp

u/CarlosVOfficial · 3 pointsr/AppleWatch
u/Built_4_Sin · 3 pointsr/AppleWatch

I've got the 'Skinomi Apple Watch Series 4 Screen Protector', both on my 44mm and my Wife's 40mm series 4. Work like a champ. I also have the Spigen Rugged Armor case on order, it should be delivered here in a few days. That along with apple care, should all but a car wreck, protect it!

​

Skinomi:

https://www.amazon.com/gp/product/B07HNR2JML/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B07HSS4KYJ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

​

Spigen:

https://www.amazon.com/gp/product/B07HSS4KYJ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

https://www.amazon.com/dp/B07HSK96MZ/ref=psdc_11591908011_t3_B07HSS4KYJ

u/amadboe · 3 pointsr/AppleWatch

Smiling Apple Watch 4 Clear Case... https://www.amazon.com/dp/B07JZ69XJ9?ref=ppx_pop_mob_ap_share

I use this. It’s the smallest one I can find. I go to the gym a lot and was always hitting my watch on weights, this works.

u/BlankBB · 3 pointsr/GalaxyWatch

Band is V-Moro "Gapless" Leather Band https://www.amazon.com/gp/product/B07S4MSZ63/

Bezel is Rinke Bezel GW-46-02 https://www.amazon.com/gp/product/B07LGRHFH3/

Watch Face is Ballozi Granador Watch Face

​

This band is quite comfortable, but I may switch out to the black leather one. Installing the band was an exercise of frustration - following the V-Moro install video didn't help at all, and I spent about half an hour trying to get the bands to fit. I finally got them on by installing them "backwards." Instead of doing the normal way of putting on the non-lever side first than fiddling with the pin to get it in, I installed it lever side first, then used a 1/16 jeweler's flathead screwdriver to pop the other side in. Worked soooo much easier.

Edit: Added modification details.

u/PracticallyIndian · 3 pointsr/GalaxyWatch

https://www.amazon.com/Ringke-Frontier-Stainless-Protection-Accessory/dp/B07LGSJF4H/


This is the one. Search for Ringke Bezel Styling for Galaxy Watch 46mm on Amazon.

u/UNlC0RN · 3 pointsr/GalaxyWatch

Links for this combination:

Blue Bezel

Watchband

Screen Protector

Watch Face

Let me know if you have any questions...

u/gogosago · 3 pointsr/GalaxyWatch

Bezel cover.

Watchface was made using WatchMaker and can be found here: http://www.getwatchmaker.com/watch/srygnzf3bi7

The background image is also animated with flashing red lights. Preview.

The source of the background is from Streets of Rage. Additional edits were done by me.

u/jcrewz · 3 pointsr/GalaxyWatch

I think they both look kinda cheap and cheesy. Go with this one. https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_em_apa_i_wi4YCbM4KC02T

u/Cuddles6505 · 2 pointsr/audiophile

do you have a home theater amplifier? if so if you have empty rca in the back say the dvd,cd player channel isn't being used you can just use an phono pre-amplifier [here] (http://www.amazon.com/electronics/dp/B000A36LQ4)
hook up - [here] (http://www.phonopreamps.com/images/TC-750dB.jpg)
all this is doing is supplying more power needed to register the turntables audio signal a new amplifier may not be the solution
if your saying you have a home theater 5.1 the Marantz PM5004 wont solve any problems (only supporting 2 speakers) you'd need a 5.1 amplifier.

u/hirschmj · 2 pointsr/audiophile

Here's a $20 option, and here's a $40 option that I'm currently using. If you want to spend more you can. Up to infinity.

u/OJNeg · 2 pointsr/audiophile

Vintage turntable: $100

Cartridge: $60 Other good options exist

Basic phono stage: $50

Headphones: $100 Headphones are hard to recommend, but the entry-level Grados are considered good bang-for-buck by most. If you want better sound, spend more on the headphones.

Headphone amp:
This is headphone specific. You probably don't need one. Build yourself a Cmoy if anything.

u/mjdubs · 2 pointsr/WeAreTheMusicMakers

Here's a link to what I'm using..

http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4/ref=sr_1_1?s=electronics&ie=UTF8&qid=1456875523&sr=1-1&keywords=tc-750

I gotta say, it sounds on par with the phono stage on my old Marantz hi-fi, if not a little better definition.

u/squarezero · 2 pointsr/vinyl

I use the TC-750 for, you input the two phono ports from the turntable and the output can be connected to the normal AUX or CD line-in on the back of the receiver.

http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4

u/aspiniou · 2 pointsr/vinyl

Hey! I'm going to get an AT 120 LP. I have a question - can i buy passive speakers, if I'm also going to buy this TCC TC-750 Phono Preamp. Do i also need to buy a large amplifier in order for this all to work?

Turntable -> TCC Phono Preamp -> PASSIVE powered speakers = is it everything i need for the music to play? Please help me out, i looked for so long and it's still really confusing to me. Thanks a million.

u/scouticus · 2 pointsr/sonos
u/JesusMakesMeLaugh · 2 pointsr/vinyl

I don't know everything about preamps, but I've seen these two recommended for a budget:

TCC TC-750 Black $43.50

Behringer PP400 $23.99

u/tiggyspawn · 2 pointsr/vinyl

Yes, you'll be able to play modern records on old turntables. All records, old and new, run at standardised speeds of 33 or 45 rpm. They're clearly marked on each LP, and you should switch the speed on the controls of your turntable.

Normally when you have a turntable connected to an amplifier, the amplifier MUST have a phono input, otherwise you need to use an external phono pre-amp (They're really cheap - something like this is fine: http://amzn.to/17VJtnt). Old "receivers" or expensive home theatre hi-fi Amps almost always do, but lots of cheaper stereos don't. Sometimes, the turntable has an in-built pre-amp. This means that it does not matter what kind of amplifier/receiver you hook it up to.

I'm not familiar enough with turntables to recommend very many, but I have a NAD c556 (identical to the Rega RP1) which I love, and goes for about $500.
One of the most popular turntables on this site is the ProJect Debut Carbon. It's also great, but doesn't come with a dust cover, which is an absolute must in my opinion (I have one and it's always covered in dust - I can't imagine what my platter would be like if the cover wasn't there!)

Depending on your budget, it can be a good idea to buy a second hand turntable. If you buy a used turntable, you should probably replace the stylus, because you can't be sure how old it is. Old needles in poor condition will permanently damage your records! Great turntables can often (and sometimes speakers) be found quite cheaply at goodwill, or garage sales.

It's also a good idea to get a brush to get dust of your records, and a cork mat, which will help prevent the build up of static, but these aren't essential to making the turntable actually work!

Finally, don't worry if it makes you look like a wanker - You don't have to be an audiophile to buy/collect vinyl, and if you like it, then that's all that matters!

u/staxnet · 2 pointsr/vinyl

I've used and like this one, but this one is popular, as well. I have no experience with the later.

u/doggscube · 2 pointsr/AppleWatch

I have the spigen case, not too bulky. I don't use a screen protector.

Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_7ATAybW84TT6N

u/teej760 · 2 pointsr/AppleWatch

Top
OULUOQI Apple Watch Case 42mm, 2 colors Design[Patent Pending], Shock-proof and Shatter-resistant for Apple Watch Nike+, Series 2, Serie https://www.amazon.com/dp/B06XYRNP1J/ref=cm_sw_r_cp_apip_SpxSWBsiz8K1A

Bottom
Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (20 https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_apip_yOATELfVSDiF9

Sorry for for lag gang/ long days at work.

u/Sansaarai · 2 pointsr/AppleWatch

Caseology or Spigen are my favorites.

u/worldrallyx · 2 pointsr/AppleWatch

Here's the link, it was actually 14$

Apple Watch Case, Spigen [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_awd_tCvKwbAA6WSE5

u/cybereclipse · 2 pointsr/AppleWatch

This will do the trick quite nicely.

Apple Watch Case, Spigen® [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_awd_ZJoHwbMA6GVKC

u/Crispycellulitis · 2 pointsr/AppleWatch

You know I got it without knowing I would get an updated version. I bought it thinking that I would have the first gen with the one hole but to my surprise the updated one showed up.

Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_57GoybWTK0819

u/lolwutalan · 2 pointsr/AppleWatch

I purchased a Spigen Rugged Armor and think it looks great! I didn't really buy it for the protection, but more to make the watch appear a bit larger on my wrist.
Spigen Rugged Armor Apple Watch Case with Resilient https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_Qo8kybDVZTXE9

u/mgnwfy · 2 pointsr/xxfitness

I work out with a SS Apple Watch. I would recommend another app like Gymaholic to track progress, reps, etc. And if you are worried about your watch there's this protector for it.

u/Evil_John · 2 pointsr/AppleWatch

Looks pretty much the same as the one you linked. https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_api_B4XgAb4SA9SJD

These are not perfect. They get dirty and scratched easily. And one of my two makes the screen a little less responsive in one corner. But they are easy to remove, affordable, and have a minimal impact on the size/shape of the watch.

u/BallisticDiamond · 2 pointsr/AppleWatch

https://www.amazon.ca/dp/B075FJT3FK/ref=cm_sw_r_cp_api_i_LqM7Ab0E1TZ12 this for the case and then maybe get some glass screen protectors and you can use the band that came with the watch or any other Apple Watch band

u/TheGoshDamnBatman · 2 pointsr/AppleWatch
u/xultar · 2 pointsr/AppleWatch

plain case

Check sizing but I like this one a lot I use it with a screen protector.

u/chemistdw · 2 pointsr/AppleWatch

Spigen Rugged Armor Works with Apple Watch Case for 44mm Series 4 (2018) - Black https://www.amazon.com/dp/B07HSS4KYJ/ref=cm_sw_r_cp_api_i_lFE4CbYFSAAHR

Screen protector I have is IQShield IQ32958 Apple Watch... https://www.amazon.com/dp/B078PVQFJV?ref=ppx_pop_mob_ap_share

u/SteveTrigs7 · 2 pointsr/AppleWatch

I put this guy on my watch on weekends when I’m working around the house and such. Adds bulk, but total protection.

Spigen Rugged Armor Works with Apple Watch Case for 44mm Series 4 (2018) - Black https://www.amazon.com/dp/B07HSS4KYJ/ref=cm_sw_r_cp_api_i_QHZSCbYQW8SGC

u/-AdamTheGreat- · 2 pointsr/AppleWatch
u/ChadAndreo · 2 pointsr/AppleWatch

The helpful suggestion above looks very special ed. I guess its one of those "eye of the beholder" things. Thanks for your feedback.

I have seen enough Apple watches in subpar condition. Just because its an Apple product, doesnt mean its indestructible.

https://www.amazon.com/dp/B07JZ69XJ9?ref=ppx_pop_mob_ap_share

u/leedrt · 2 pointsr/GalaxyWatch

Ringke from Amazon... Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-02 https://www.amazon.com/dp/B07LGRHFH3/ref=cm_sw_r_cp_apa_i_-boBCb64TE09C

u/babzillan · 2 pointsr/GalaxyWatch

Found on amazon: Ringke Bezel Styling for Galaxy Watch 46mm / Gear S3 Frontier & Classic, Bezel Ring Case Adhesive Cover Anti Scratch Protection for Galaxy Watch Accessory [Stainless Steel] GW-46-03 https://www.amazon.co.uk/dp/B07LGSJF4H/ref=cm_sw_r_cp_apa_i_IC2BDb943RZEW

u/hurpdurpenstein · 2 pointsr/EDC

Everything currently on the watch :)

Case

Bezel Cover

Screen Shield

Band

u/ElCapitanothe1st · 2 pointsr/GalaxyWatch

No issues with mine, I have a black ringke bezel cover and it always works.

This is the one I have: https://www.amazon.co.uk/gp/aw/d/B07LGV5XHW?psc=1&ref=ppx_pop_mob_b_asin_title

u/Babuskaruska · 2 pointsr/GalaxyWatch

Rinke bezel it's seen better days, dark color from number are peeling off

Band is V-MORO metal strap

Both of them bought from Amazon
https://www.amazon.com/dp/B0721W3MJ5/ref=cm_sw_r_cp_apap_u8gg8AihNjfai

https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apap_Ymwti6XxauRl1

u/wNg11188 · 2 pointsr/GalaxyWatch

Yea its true. I did a few experiments putting it on and off and I ultimately returned it. I believe I have a nickel allergy.

Here's the bezel I bought: Ringke Bezel Styling for Galaxy... https://www.amazon.com/dp/B07LGVRPP3?ref=ppx_pop_mob_ap_share

u/_Kill_Will_ · 2 pointsr/GalaxyWatch

For an active setting I like MD 153 or SportMinimalLite, and for a more professional look I like AS_Watch_Mod or X2 Viron.

Barton makes the absolute best silicone strap, it has a curve on each strap that makes it more comfortable for a larger wrist.
https://www.amazon.com/Barton-Elite-Silicone-Watch-Bands/dp/B07B5M91V7/ref=mp_s_a_1_5?keywords=barton+galaxy+watch+46mm+bands&qid=1567896574&s=gateway&sprefix=Barton+Galaxy+watch&sr=8-5

I went this route for a more professional look. Also a bezel cover looks great in any setting. https://www.amazon.com/gp/aw/d/B07HQ8NSRX?psc=1&ref=ppx_pop_mob_b_asin_title

https://www.amazon.com/gp/aw/d/B07LGVRPP3?psc=1&ref=ppx_pop_mob_b_asin_title

u/Diesel7390 · 2 pointsr/GalaxyWatch

TRUMiRR No Gap Band for Galaxy Watch 46mm / Gear S3 with Solid Clips, Quick Release Stainless Steel Watchband Hand Detach Strap Wristband for Samsung Galaxy Watch 46mm R800/Gear S3 Classic/Frontier https://www.amazon.com/dp/B07X8TXGVB/ref=cm_sw_r_cp_apa_i_yLF2DbHJT3XTF


Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-01 https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apa_i_cLF2Db27JS5GE

u/ernestMAM · 2 pointsr/GalaxyWatch

I bought this one from Amazon....

Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-12 https://www.amazon.ca/dp/B07PXP4QT3/ref=cm_sw_r_cp_apa_i_vLyBDbA3Q54FE

......not bulky at all. They have different colours and styles.

Here's an actual pic of mine....

https://imgur.com/a/MKrTW6f

u/kebabking93 · 2 pointsr/GalaxyWatch

This is the bezel I bought if you're interested in it mate...

https://www.amazon.co.uk/dp/B07PXP4QT3/ref=cm_sw_r_cp_apa_i_N3uWDb6PJCJJ3

u/wonderwomangce · 2 pointsr/GalaxyWatch

I got this Spigen Liquid Air for the 44mm instead of the Ringke and I really like how it looks. It protects the sides of my watch without looking bulky. If you like it, then I hope it's available in your country

u/robotmaxtron · 1 pointr/headphones

No, you can't simply connect the RCA cable to the turntable and the crack, phono voltage out is below 'line level' amounts.

To mirror what /u/andrews013 said, yes the aune is probably the weakest point of your stack. If you want to improve your setup, sell the Aune, buy a proper phono pre-amp such as:

TCC TC-750

Rega Fono Mini (which does have a USB output)

Bugle2

or several others & for dac suggestions I'd probably go with either a Schiit Modi, Henry Audio DAC or JDSLabs Standalone ODAC,

u/firitheryn · 1 pointr/audiophile

I just found this. I'm pretty sure it's for line level input, so you would need any basic phono stage to input to it. I've heard people talk about this one, it gets fairly positive reviews.

u/ytisoiruc1 · 1 pointr/audiophile

All the setups I've seen have the ground go to the preamp. I've seen people reference these

u/[deleted] · 1 pointr/vinyl

Thanks for the response!~

Now, is there any particular brand of p-mount cartridge you recommend? Are there any tools I will need to install the cartridge? And I was looking at amplifiers on line (before your comment was posted) and I came across this "TCC TC-750 BLACK Audiophile Phono Preamp" which seems to have gotten pretty good reviews. However would it still be more advantageous to get a vintage amp? Would it wind up costing less?

u/thegreatuke · 1 pointr/vinyl

Could I use Pyle - Mini 2x75W Stereo Power Amplifier with TCC TC-750 and be good? I really don't see the need to have a huge flippin' box when all I'm wanting to drive is a single turntable...but again, I'm wanting to keep as much fidelity as possible. I'm also simply wanting the only thing sitting on my white bookshelf to be the white turntable (aesthetic whore :).

u/Someone-Something · 1 pointr/vinyl

I am looking for a more compact setup. I currently have a Technics SL-23 sitting on top of a Onkyo TX-80 and it looks horrible. I am also using JBL 2500 bookshelf speakers.

My question is this: Will [this Pyle Amplifier] (https://www.amazon.com/dp/B001P2R1RW/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=13XYWXZAWR3J1&coliid=IQ10TXTENCS80) and a [TCC TC-750 BLACK Audiophile Phono Preamp] (https://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4/ref=sr_1_1?s=electronics&ie=UTF8&qid=1464799060&sr=1-1&keywords=tcc+phono+preamp) give me close to the performance (if you can call it that) of the Onkyo? Would a Rolls VP29 also suffice for a pre-amp?

Thank you for any input.

u/LetsSaveEm · 1 pointr/vinyl

Hey guys! I've been lurking this subreddit since I picked up my first record a couple months ago. Since then, I've been researching budget turntables, and decided to buy this https://www.amazon.com/dp/B01F2B3FKI/ref=twister_B01KI5736U?_encoding=UTF8&psc=1 turntable and this https://www.amazon.com/gp/product/B000A36LQ4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 pre-amp.
I went scouring the pawn shops today and came across this http://imgur.com/a/2Lt0j amplifier. I liked the look of it, and figured you couldn't really go wrong with an '89 or '90 Kenwood amp. I took it home for $50, and realized there is no volume control! Apparently this model (KM-208) was originally sold with a pre-amp that had all of the volume controls. I have 30 days to return it, but if possible, I wouldn't mind rigging up a volume dial. Is this amp worth the work, or should I return it? As of now I don't have any speakers, but I'm willing to spend up to $250ish. I'm also considering building my own with the same budget.

TL;DR I'm new to vinyl ad so far have collected a TT, a pre-amp, and would like your opinion on the amp I bought.

Thanks for reading. I'm looking forward to your feedback!

u/livingspeedbump · 1 pointr/vinyl

Well you would plug the record player into the "input" of the preamp, and them from the output of the preamp you would go into any "input" of the Yamaha. So CD, AUX would be a good bet. And then yes, after speakers, you are good to go.

Here is a phono preamp for even cheaper. ;)

http://www.amazon.com/TC-750-BLACK-Audiophile-Phono-Preamplifier/dp/B000A36LQ4/ref=sr_1_3?ie=UTF8&qid=1406504785&sr=8-3&keywords=preamp+phono

u/thewelcomematt · 1 pointr/vinyl

Hi there, complete newbie here, just ordered a JVC AL-F3 automatic table for my first one. They said it comes with an Audio Technica SLT88E needle/cartridge. I just had a few questions/reassurances from the beginner's guide.

I assume I will need to get a new platter(I think that's what they are called?, the thing that goes below the record)

Do I have to get a new cartridge right away?

I was looking for a preamp for it, was thinking this maybe? Any other recommendations? https://www.amazon.com/TC-750-Audiophile-Phono-Pre-amp-Preamplifier/dp/B000A36LQ4/ref=pd_bbs_sr_1?ie=UTF8&s=electronics&qid=1198035223&sr=8-1&tag=Audioreview-VigLink-Convert-20



also if anybody then had some passive speaker recommendations, something cheap preferred

u/vinyl_SS · 1 pointr/SubredditSimulator

I never play a record on RSD the same as the tone-arm weight? If you can swing it, I'd go for their preamp, or this one if you use it more than probably half the record.

u/explosivo563 · 1 pointr/vinyl

I have seen the Grado black recommended, but it's probably outside my price range for my first upgrade, as it's worth more than what I paid for the TT. I also read that conical is better for older records, because an elliptical would make the pops and clicks louder, is that true? I just started so I don't have many new records yet, but I plan to. And yeah, I just got the Pyle as a stop gap until I can afford something better. I also looked at the TCC Preamp, is the ART still preferred? Thanks.

EDIT: My setup is a yamaha 3066 (aka 375) receiver, Micca MB42X speakers and an andrew jones sub.

u/adayinalife · 1 pointr/vinyl
u/andrestheguat · 1 pointr/vinyl

What are some suggestions for receivers?

Turntable will be a U-turn Orbit Plus and I'm thinking of purchasing the TCC TC-750. I haven't purchased the preamp yet, so feel free to suggest receivers with it built-in too.

u/glaciator · 1 pointr/audiophile

You could skip the receiver in general if your only input is turntable by buying a turntable pre-amp like this http://www.amazon.com/gp/product/B000A36LQ4/ref=as_li_ss_tl?ie=UTF8&tag=googlcom05-20&linkCode=as2&camp=217145&creativeASIN=B000A36LQ4
Otherwise, I guess I'd do as DrGrinch recommended and use the tape/monitor out on the receiver.

u/ch0c0l2te · 1 pointr/vinyl

cool i'll check that out! I'm planning to use headphones and i already have this phono preamp as well as this amp ready to order. All I need next is the turntable correct?

EDIT: possibly this Samsung SS-3350 reciever instead of that amp and preamp i posted above?

u/ObservationSlave · 1 pointr/vinyl

Thanks for the response. I understand the questions were a little...stupid, and I appreciate you taking the time to answer them. If you don't mind answering another....

As far as a pre-amp, I'm trying to decide between this or this. Have you heard anything about these? Something else you recommend?

u/Dragorobot · 1 pointr/EDC

Case - https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_apip_sWygC8vcNrKI8

Band - https://www.amazon.com/dp/B073BG9V9Z/ref=cm_sw_r_cp_apip_poxXNRlU9xrug

I wouldn’t dare edc my Apple Watch without some form of protection, main reason is because I accidentally hit my previous edc watch on the corner of my marble countertop and I’ve been paranoid ever since. You’re wild for running a spartan race without protection LOL.

And the reason I carried fmj its difficult for me to acquire special ammo like hp so I figured it’s better than nothing, but luckily I recently found a seller of 45 hp so I’ve taken the liberty of loading my mags with those.

u/jpyounis1 · 1 pointr/AppleWatch

agreed, had a gshock aviator before. I use it caseless with a zagg shield on the screen i had them put on in the local mall. looks like new, i swap the silicone bands often tho. Seems to hold up well. i'd probably recommend something like the case my friend has below, if your in a foot pursuit prone area or generally rough area.

My buddy works in another dept and has this rugged armor case on it: http://www.amazon.com/Apple-Watch-Spigen-Rugged-Resilient/dp/B00UVSNQPM/ref=sr_1_3?ie=UTF8&qid=1465247925&sr=8-3&keywords=apple+watch+case

u/NeakosOK · 1 pointr/AppleWatch

Apple Watch Case, Spigen [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_04YxxbSGH4R5M

This is the case. I don't remember where I got the band though. Sorry

u/hammadurb · 1 pointr/AppleWatch

Apple Watch Case, Spigen [Rugged Armor] Resilient [Black] - [Include 2 Screen Protectors] Ultimate protection from drops and impacts for Apple Watch 42mm (2015) - Black (SGP11496) https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_OrxIxb6ZM0V4Y

u/anon-na · 1 pointr/AppleWatch

Yeah, this one. Series 1 and 2 are same form factor, so there is no variance in case size/ shape between watch series. You have to use the screen protector that comes with it, though. Any other screen protector that wraps the edges will not work with the case. Just a heads up ;)

u/gohomepat · 1 pointr/AppleWatch

I've worn G-Shocks most of my life. I iust love how bulky they are. I highly recommend Spigen! The case is sold separately from the band but I have piece of mind when wearing it. My only real complaint about it is that the band requires a bit of dexterity to securely fasten. Nothing a little practice won't fix.

https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_apip_YH6PHVIwdfkXN

EDIT: Link

u/FirstDueEngine2 · 1 pointr/Firefighting
u/cyanletters · 1 pointr/AppleWatch

My friends is an airplane mechanic and uses an Apple Watch with a protective case. He's banged it up quite a bit and hasn't had any issues.

I'm pretty sure he has this one:

Spigen Rugged Armor Apple Watch Case with Resilient Shock Absorption and 2 Screen Protectors Included for 42mm Apple Watch Series 2 / 1 / Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_tQU8yb49TAKT9

u/one4u2nv · 1 pointr/AppleWatch

I use this case and this band on my S0 when I'm doing more active things currently. Most other times I just have it naked. I'll use the same on my S3 if it ever finally comes (thanks a lot Best Buy).

u/Ripcord999 · 1 pointr/AppleWatch
u/penguinpunisher · 1 pointr/AppleWatch

Haven't tried that particular one, but I have the Spigen Rugged Armor and really like it.

u/ekeen1 · 1 pointr/AppleWatch

The general attitude towards cases on this sub is generally no, but given certain environments I can see why it's a good idea.

Unless you're going swimming (full watch submersion for long periods of time), you probably won't need the catalyst case for the Apple Watch.

For rough physical environments, I recommend using something like this Spigen case. You'll save a great deal of cash compared to the catalyst but also have adequate impact protection.

u/jetski137 · 1 pointr/EDC

I’ve been using this same Spigen case for three years now. I bought it when I got my Series 1 Watch and it has carried over to my Series 3. I also bought one for my girlfriend when she got hers. No issues whatsoever, and it’s protected my watches from all the bumps and other unfortunate contact they’ve had to deal with. A proverbial knock on wood will follow this, but I’ve never had a screen scratch, crack or any case damage whatsoever.

https://www.amazon.com/Spigen-Extreme-Protection-Screen-Protector/dp/B00UVSOWBY

u/Batting1k · 1 pointr/AppleWatch

http://www.spigen.com/collections/apple-watch/products/apple-watch-case-tough-armor?variant=1193321617

If you have the 42mm watch, this is a good one. It has a built in screen protector. The Spigen website says it's backordered, but it seems to be in stock on Amazon + it's cheaper there too.

http://www.amazon.com/Spigen®-Protector-Gunmetal-EXTREME-Protection/dp/B00UVSOWBY/ref=sr_1_1?ie=UTF8&qid=1451066119&sr=8-1&keywords=spigen+tough+armor+watch

u/miroben · 1 pointr/AppleWatch

I have a similar one to your 2nd example. The Spigen Tough Armor. It includes a built-in screen protector. It's working well so far.

I also considered your first example, but was concerned that it might scratch the watch after sliding it on/off repeatedly.

I don't really like the look of screen protectors as I can usually see the edges and, IMO, they take away from the look of the device and screen quality. I also don't want to have my watch in a case full time. However, I wanted something to protect my watch when working in the yard, on the car, etc. This case was the best I could find to protect both the screen and the watch. It's fairly easy to put on/take off. It looks good enough that I could leave it on for a quick trip in to town if I didn't want to bother taking it off right away.

I could not find many options that included the built in screen protection. I wish I could find something comparable that would not require me to remove the band to install/uninstall .
I would also like to have one that was easy to install/uninstall and covered the digital crown to keep out dust when mowing, etc.

u/IEatPizza · 1 pointr/AppleWatch

This one here I like it since always that I wear a watch i hit it everywhere

u/Aggiegirl2013 · 1 pointr/AppleWatch

Thank you! Yes it is, I got this one from Amazon


They come in a whole set, but I just use the black one. I'm constantly bumping my hands into things and wanted to protect my watch. It's done a great job, I have broken one and reordered to get another black one.

u/Bike_lurker · 1 pointr/AppleWatch

Here it is:

My wife uses the rose gold and it is a PERFECT match. The red one is a bit light, not Product Red red, if you know what I mean.

https://www.amazon.com/gp/product/B014H9WMHS/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

u/iamthekiller · 1 pointr/AppleWatch

I got the 38mm LTE series 3 in silver aluminum with applecare. I put a screen protector and case on regardless of which model because they all scratch. If you’re concerned about shattering from impact or bumps then definitely go with the aluminum and save some cash.

Armorsuit - Apple Watch Screen Protector (38mm Series 3 / 2 / 1 Compatible) MilitaryShield [Max Coverage] Screen Protector for Apple watch 38 mm [2 Pack] https://www.amazon.com/dp/B00UH3K244/ref=cm_sw_r_cp_api_xgTMAbKQXSF5C

[6 Color Pack] Fintie Apple Watch Case 38mm, Ultra Slim Lightweight Polycarbonate Hard Protective Bumper Cover for All Versions 38mm Apple Watch Series 3 (2017) / Series 2 / Series 1 Sport & Edition https://www.amazon.com/dp/B014HA8RG2?ref=yo_pop_ma_swf

Although you may want a more protective case. These snap on and can come off with enough of a bump.

u/KnottyOwl · 1 pointr/AppleWatch

I'm a nurse and want to wear mine at work. I just got my Apple Watch Sport and I'm worried about scratching it by bumping it on someone's bed rail or something, so I ordered a screen protector from Amazon and also some bumpers for the face to change up the color and add some protection from scuffs. I also got apple care. I may be being too cautious, but I rarely spend $350 on an accessory so you're damn right I'm gonna baby it!

Edit: This is the screen protector I ordered. I haven't received it yet but it offers edge to edge protection and seemed to have mostly positive reviews.

These are the bumpers I got. I thought they'd add a little extra protection and plus it'll be fun to switch up the colors and match them with different bands.

u/StinkyDogFarts · 1 pointr/AppleWatch

Apple watch Series 2 42MM Case , Monoy 2-Pack (Clear+Grey) New Design Slim Clear 2nd PC Hard Screen Protector for iwatch Series 2 42mm 2016 (PC Hard C https://www.amazon.com/dp/B01MTL6BRE/ref=cm_sw_r_cp_apip_mkwJ4Cn9qoxRp

u/Kukri187 · 1 pointr/AppleWatch

I use a Spigen tough armor case and a Zagg invisashield

But you could use just the case if you wanted.

u/cawbrey234 · 1 pointr/AppleWatch

MENEEA for Apple Watch Series 4... https://www.amazon.com/dp/B07HNZGB3Q?ref=ppx_pop_mob_ap_share

I currently use this and it looks great tbh, along with the skinomi screen protector

u/misssubie · 1 pointr/AppleWatch

Spigen 40mm rugged armor this is their rugged armor version. They usually have another minimal design they come out with but looks like this one will be out first

u/linuxweenie · 1 pointr/AppleWatch

I move a lot also, have had no problem, except being able to turn off alarms on my iPhone using my watch when the iPhone is in another room. Just recently added this for more protection - https://www.amazon.com/gp/aw/d/B07HSS4KYJ.

u/FrancDescartes · 1 pointr/AppleWatch
u/Gregory-76 · 1 pointr/AppleWatch

Ooh really that’s funny. I do the same. I don’t mix concrete much but I wouldn’t want it in my watch. If I were you I’d maybe get a small case. I don’t like them but it helps.

My case got all jacked up. https://www.amazon.com/dp/B07JZ69XJ9/ref=cm_sw_r_cp_api_i_i2rVCbNA3BF5F

u/paulemill · 1 pointr/GalaxyWatch

Face:

http://apps.samsung.com/gear/appDetail.as?appId=com.watchface.JewelerHornet

Bezel:

Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-02 https://www.amazon.com/dp/B07LGRHFH3/ref=cm_sw_r_cp_apa_i_6q0IDbM2Q1E7Y

u/Peterrv12 · 1 pointr/GalaxyWatch

Yes, I did the Ringke bezel and really like it. I will try to attach a picture here.
Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-02 https://www.amazon.com/dp/B07LGRHFH3/ref=cm_sw_r_cp_api_i_G6IXCbW03J7RX

Picture of mine https://imgur.com/a/azSD3Sl

u/RolandSchitt · 1 pointr/GalaxyWatch

Ringke Bezel Styling for Galaxy Watch 46mm / Gear S3 Frontier & Classic, Bezel Ring Case Adhesive Cover Anti Scratch Protection for Galaxy Watch Accessory [Stainless Steel] GW-46-03 https://www.amazon.co.uk/dp/B07LGSJF4H/ref=cm_sw_r_cp_apa_i_IC2BDb943RZEW

u/Ooolongjohns0n · 1 pointr/GalaxyWatch
u/froggy365 · 1 pointr/GalaxyWatch

Yeah! Here's the exact one I have, but there are a bunch more in the drop down.
https://www.amazon.com/dp/B07LGV5XHW/ref=cm_sw_r_cp_apa_i_BeuVCbZ6MGKDX

I'm also using a glass screen protector (Omoton tempered glass) which has been great.

u/Halfdaykid · 1 pointr/GalaxyWatch

Here you go there are different ones too.

u/thefutureme73 · 1 pointr/GalaxyWatch
u/Pxnkasfxck · 1 pointr/GalaxyWatch

Band: 22mm Universal Curved End Metal Watch Band Solid 304 Stainless Steel Adjustable Silver SS Watch Strap https://www.amazon.com/dp/B077ZQCXHB/ref=cm_sw_r_cp_apa_i_XEbMDb99K809W

Bezel: Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-01 https://www.amazon.com/dp/B07LGVRPP3/ref=cm_sw_r_cp_apa_i_dFbMDbENEVN3Z

Face: http://apps.samsung.com/gear/appDetail.as?appId=com.watchface.isaacwatchGentleman_Universal_edition_v2

u/hannyboy2006 · 1 pointr/GalaxyWatch

Ringke Bezel Styling for Galaxy.
https://www.amazon.co.uk/dp/B07LGVRPP3?ref=ppx_pop_mob_ap_share

👍🏼👌🏻

u/re4pz · 1 pointr/GalaxyWatch

Watch: Galaxy Watch 46mm (bluetooth edition)

Bezel: Ringke Stainless Steel (46-01): https://www.amazon.de/gp/product/B07LGVRPP3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Watchband: Stainless Steel Metal Watch Band Strap For Samsung Gear S3 Frontier / S3 Classic https://www.wish.com/feed/recently_viewed__tab/product/590061f18a81cc2a9c1bc252

Watchface: Metro Watch (Free): https://galaxystore.samsung.com/geardetail/com.watchface.Metro

u/Joashane · 1 pointr/GalaxyWatch

Here you go: Ringke Bezel Styling for Galaxy Watch 46mm / Galaxy Gear S3 Frontier & Classic Bezel Ring Adhesive Cover Anti Scratch Stainless Steel Protection [Stainless] for Galaxy Watch Accessory GW-46-12 https://www.amazon.com/dp/B07PXP4QT3/ref=cm_sw_r_cp_apa_i_McsFDbH60ZS0V

u/GeneralAkbari · 1 pointr/GalaxyWatch

https://www.amazon.ca/Ringke-Frontier-Stainless-Protection-Accessory/dp/B07PXP4QT3/ref=mp_s_a_1_2?keywords=ringke%2Bsamsung%2Bgalaxy%2Bwatch&qid=1557661341&s=gateway&sprefix=ringke%2Bsamsungg%2Bgalaxy%2Bw&sr=8-2&th=1&psc=1

This is the product from Ringke. I can take a shot from an angle later today. It does not look obvious that it is a stick on accessory. In fact when I show my watch to other people, they can never tell it is a separate accessory.

The adhesive for the bezel is one time use, so once you remove it, it cannot be reused.

u/Kaptainkarl76 · 1 pointr/GalaxyWatch

They are pretty rugged and don't feel cheap...I have the stainless steel bezel that has no numbers..Looks like new, even after bumping it a few times..

​

https://www.amazon.com/dp/B07PXP4QT3/ref=twister_B07R2CY5YS?_encoding=UTF8&psc=1

u/rtromao · 1 pointr/GalaxyWatch

https://www.amazon.ca/dp/B07Y2P664F?ref=ppx_pop_mob_ap_share

But unfortunately, it's not available anymore

u/wyrmbyte · 1 pointr/GalaxyWatch

Yes, that's the one I have. Like it so much that I kept in on instead of replacing it with my Ringke Bezel.

Edit: I got mine from Amazon. Just checked they still have them.

https://www.amazon.com/Spigen-Liquid-Designed-Samsung-Galaxy/dp/B07YBMVVLT/ref=sr_1_9?keywords=samsung+active+2+case&qid=1572806033&sr=8-9

u/Sydeon · 1 pointr/GalaxyWatch

40mm version is up for preorder too.

Spigen Liquid Air Armor Designed for Samsung Galaxy Watch Active 2 Case 40mm (2019) - Black https://www.amazon.com/dp/B07YBMX5SQ/ref=cm_sw_r_cp_apa_i_1MULDbMAM8K1E

u/_Aisus_ · 1 pointr/GalaxyWatch

I was looking at something like this plus a tempered glass screen protector. I haven't seen one for the 44mm yet but I would imagine it's coming out soon since they have the 40mm out.

Amazon Link

u/franko3 · 1 pointr/GalaxyWatch

Got mine from Amazon UK last week, here is the link, hope it helps?

https://www.amazon.co.uk/gp/aw/d/B07YBMX5SQ?psc=1&ref=ppx_pop_mob_b_asin_image

u/SearMagician · 0 pointsr/AppleWatch
u/ChiHawks4Life · 0 pointsr/AppleWatch
u/cool158 · -2 pointsr/AppleWatch

Got you bro! Spigen Rugged Armor Designed for Apple Watch Case for 42mm Series 3/Series 2/1/Original (2015) - Black https://www.amazon.com/dp/B00UVSNQPM/ref=cm_sw_r_cp_api_i_HVXCDbBHW2GHR