Best stage powered amplifiers according to redditors

We found 541 Reddit comments discussing the best stage powered amplifiers. We ranked the 42 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Stage Powered Mixers:

u/mr_william · 36 pointsr/regularcarreviews

Just a small suggestion for /u/RegularCars and /u/RegularRoman:

If these ask Mr. Regular videos are going to be a regular thing, get a small cheap mixer and a second mic (or lapel mics)

The noise from passing the mic back and forth was a bit distracting

^^^^Also ^^^^answer ^^^^my ^^^^question ^^^^next ^^^^time ^^^^:)

u/theguycalledtom · 13 pointsr/podcasts

Not amazing quality but Behringer can get you started for cheap. This is probably the cheapest way to get started without all crowding around one microphone.

u/i_dont_like_reddit_6 · 12 pointsr/synthesizers

A small company called Maker Hart sells a small mixer like this. I bought one for my Volcas and Tb03 and its pretty great. https://www.amazon.com/LOOP-MIXER-Portable-Channels-Stereo/dp/B01M68UK38

u/Arve · 9 pointsr/headphones

Yes, it's called a "mixer" - you can find them for about $50 and up on Amazon, example. You're going to need an assortment of cables/addons:

  1. 3.5 mm TRS to dual 6.3 mm TS cable for connecting the iPod
  2. Scart to RCA adapter, connected to the SCART output on the PS3
  3. RCA to 6.3 mm TS cable between the mixer and the scart A/V adapter.

    Note, this assumes that you have regular headphones, not a wireless bluetooth headset paired to the PS3, in which case you're screwed.
u/RobbazTube · 9 pointsr/Robbaz

Yamaha AG03 and PC360 headset.

https://www.amazon.com/Yamaha-AG03-3-Channel-Mixer-Microphone/dp/B00TY8JE60/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1521323557&sr=1-1-catcorr&keywords=ag03

https://www.amazon.com/Sennheiser-360-Special-Gaming-Headset/dp/B01LDTRJG4/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1521323576&sr=8-1&keywords=pc360

My Xenyx 302 was replaced with the Yamaha ag03 just recently, so now i can scream like a moron without peaking, it also removes a lot of noise just like the xenyx 302 did.

Pc360 is a excellent headset, light, durable and open aucustics. Its also known as g4me one but its the same headdset.

Running a Corsair RGB Silent keyboard with additional orings, so keyboard is almost never picked up.

u/moustachedelait · 7 pointsr/karaoke
  • I started out with just trying to get it going on my laptop with kjams & a microphone.
  • But that didn't sound good and look good, so I hooked up my laptop to my tv through a receiver
  • But using my mic through the laptop mic hole, caused a delay between the audio of the song and the mic
  • This is why you need a mixer. You need the sound of the laptop and the sound of the mic to arrive at the same time. I got this one. Mic goes in channel one, laptop goes in channel 3 or 4 (get the right cable)
  • That mixer's output goes into my receiver now. My receiver allows to get the audio from a different input than the video. This was essential in my setup. I have a basic yamaha 4 hdmi receiver. I turn it to hdmi1, but get the sound from one of the audio inputs, where the mixer goes into (get the right cable)
  • sweet, now I have music and mic arriving in my receiver, and it's going to the speakers and the tv is displaying my laptop
  • now people are tripping over the mic cable and they want a second mic
  • get yourself some wireless mics. the ones i bought are no longer for sale but they are "dual channel" and "uhf" or something
  • now you need some songs though I have to say, just opening youtube and searching a song title + ' karaoke' works pretty darn well as well
  • and some disco lights!
  • my friends like it and say it's the best home setup they know


    Btw, nice effort on the è but you want the other one: fiancé
    It's easy to remember: é the stripe goes on and so does the sound. è the stripe stops and the sound is short

u/flanger001 · 7 pointsr/drums

You could get yourself a small mixer with a headphone output. http://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ for example. Then you send the monitor signal from your front of house mixer to a channel on that instead of to an amp and speaker, and then connect your click to another channel on the mixer. Plug your earbuds into the headphone out and enjoy playing to a click!

u/BoneKin · 7 pointsr/battlefield3

For my setup (the live mixed one) I use this.

To record my own voice, I have a microphone set up next to me.

To record my teammates, I split the Xbox Live headset with this.

From the splitter to the audio mixer, I have one of these from an old Turtle Beach headset. I have to use this and select "MUTE" on it to prevent my team from hearing an echo.

Finally, they all plug into the mixer, which then outputs to the PVR.

This is a rather complicated setup and means I have several wires going to my controller. I should also mention that doing this means my own voice comes out of my TV when I'm playing. I avoid this by muting my TV and using a Turtle Beach headset. The audio for that comes from the fiber optic connection in the back and is unaffected by my other modifications.

A simpler way to do it with the mixer would be to skip the splitter part and just have your Xbox voice output set to play through speakers. The voice is a bit lower quality, but it works.

Then finally is the third option. No live mixing, but recording your voice with a computer and mixing it in software later.

u/ZeosPantera · 7 pointsr/audio

If it takes an RCA input you could just get a small mixer and mix the two permanently.

u/djdementia · 7 pointsr/audioengineering

Yes - however there is no need to convert to XLR you just need to convert to TRS.

That input on the front isn't just XLR - it is XLR & TRS combo jack. it's easier to find 3.5mm to TRS cables like this: https://smile.amazon.com/MOTONG-Stereo-Female-Connector-Connectors/dp/B01DYHD2D2/

You just plug one of the two connectors into the Safire 2i2 it goes into the large center hole on that XLR connector.

And that isn't a USB mixer - that is a USB audio interface. This is a USB mixer.

u/Roctopuss · 6 pointsr/synthesizers

Here's one that cheaper, 5 STEREO channels instead of mono, great reviews, and a USB out!

https://www.amazon.com/gp/product/B01M68UK38/ref=ox_sc_sfl_title_3?ie=UTF8&psc=1&smid=A3QY80NORGXT27

u/BeMadTV · 6 pointsr/caseyneistat

Based on this picture, I will try my best. Correct me if I am wrong:

https://www.tubefilter.com/wp-content/uploads/2018/05/couples-therapy.jpg

Headphones:

https://www.amazon.com/Sony-MDR7506-Professional-Diaphragm-Headphone/dp/B000AJIF4E

Microphone:

https://www.amazon.com/Shure-SM58-LC-Vocal-Microphone-Cardioid/dp/B000CZ0R42

Mixer:

https://www.amazon.com/Zoom-L-12-LiveTrak/dp/B074G25D6Y

If interested, I can tell you the setup I use for this podcast if you like the sound (My first time, still working out the kinks). It's portable too and I wouldn't have to guess the equipment:

https://www.youtube.com/watch?v=OuoIcdQLoAE

u/dudemanxx · 6 pointsr/synthesizers

You can't turn one down without turning down the rest of the chain. At least, not without some likely menu-diving. You also have to try to manage all that gain-staging, creatively. You might be reducing your dynamic range, compositionally, for the sake of dancing the line between too quiet and clipping. There's just no beating a mixer, when it comes to, well, mixing.

I highly recommend getting a mixer. They have some reasonable portable ones now- the rolls and nady mixers come to mind. More featured ones have recorders built in, which could be helpful. Consider the Zoom R16 for this, as it gets plenty love. 8 inputs at a time. If you don't mind being plugged in, nab yourself a cheap behringer mixer used and keep it pushin. I'll link u in a sec, I'm at work lol.

edit: yeah, highly recommend a mixer, but you'll be find daisy-chaining while you research and save up. just be mindful of your needs and how you'll need to route your audio so you're minimizing compromise.

u/gabmartini · 6 pointsr/argentina

Hola!

Arranqué el proyecto Economista del medio el año pasado como una forma de llevar el laburo de analista de consultoría macroeconómica a un espectro de población más amplio, lo cual implica menos jerga y biribiri financiero. Este año se sumó la periodista de Infobae Jorgelina Do Rosario y empezamos a cambiar el formato del programa: hemos ordenado los temas y sumamos las entrevistas que le dan un valor agregado enorme al oyente. Estamos muy contentos con el resultado hasta ahora, tanto en calidad del material como en escuchas.

De la misma manera que como mejoró el material también mejoró el hardware con el cual grabamos. En su momento empecé con un mixer Behringer Xenyx 1202FX, un micrófono Shure SM58, unos auriculares Audio Technica M40x y una Zoom H4n. Luego de mi viaje a Japón me traje micrófono un Audio Technica 4040 (large diaphragm condenser) y ahí terminó el avance en hardware en 2016. En términos de software editaba (y sigo editando) el archivo crudo con el Logic Pro X de Apple.

Este año invertimos y nos trajimos (via Amazon Europa) un mixer Allen & Heath Zed60 10fx y un segundo micrófono Audio Technica pero el AT875r (un shotgun cortito condenser que es una maravilla). De backup tenemos dos micrófonos Audio Technica 2100 (los que son USB/XLR) que en relación precio/calidad son muy recomendados para los podcasters amateurs. En resumen, nuestro lineup de materiales es de primera calidad y para explotarlo al máximo, estamos intentando mejorar el tratamiento acústico del área donde grabamos para minimizar ruidos indeseados.

Como te decía, estamos muy contentos con las escuchas (en número general y en público en particular, es decir, los quienes). Hemos recibido comentarios de gente que nos sorprendió y eso nos motiva. Todavía no es LA masividad en escuchas pero queremos estar acá invirtiendo en esto para que cuando explote el podcasting en Argentina (porque va a pasar, que no te quepa la menor duda) tener una buena base y experiencia para seguir proyectándonos.

Lo lindo es que se están acercando algunos sponsors interesados en el material asi que significa que hay proyección a futuro. La verdad que al día de hoy estamos muy a gusto y cómodos laburando en el proyecto, que es para nosotros ahora lo más importante.

Por otro lado, una de las cosas más copadas que me pasó es poder grabar con una persona que conozco y confío de hace muchos años. Al principio hacerlo solo era más un desahogo pero laburar con alguien en esto, que aparte sabe y se mueve en el medio, tiene algo muy especial y divertido. Ese es un item que taché de mi lista de pendientes.

En materia de proyección a futuro y ToDos, creo que seguir mejorando y buscando calidad para ofrecer el mejor producto disponible en el mercado. En materia de hardware todavía tengo la espinita clavada por el Shure SM7b con su respectivo Cloudlifter pero por ahora estamos muy contentos con el equipo con el cual grabamos.

Saludos!

u/HanSoloBolo · 5 pointsr/casualiama

I would recommend upgrading that at least a little bit. I host podcasts and I wouldn't want headphone mic audio on my show.

You should at least look at some cheap usb microphones. I'd recommend the [ATR 2100] () which I bought for 25 bucks. I'm currently using an [XLR mixing board] (http://www.amazon.com/Behringer-1202-BEHRINGER-XENYX/dp/B000J5Y282/ref=sr_1_4?ie=UTF8&qid=1456871248&sr=8-4&keywords=behringer+mixing+board) and a [10 dollar dynamic microphone] (http://www.amazon.com/Behringer-XM8500-Dynamic-Cardioid-Microphone/dp/B0002KZAKS/ref=sr_1_3?ie=UTF8&qid=1456871363&sr=8-3&keywords=behringer+3+pack) that sound absolutely wonderful and only cost me 70 bucks when I bought them used.

u/Ashtonmore · 5 pointsr/videography

DO NOT get the Yeti. (I have so many firends using the yeti and its sounds like garbage)

My honest recommendation would be to get a USB audio interface (cheap: $100 One I would buy myself: $200 Best money can buy: soem stupid high number like $20,000) and a XLR mic. (these also range from $20 to $2000)

The interface I would recommend: Yamaha MG Series I personally like the MG10XU since it has a built in compressor (and if I remember correctly limiter as well) which is not a normal thing to find at this pricepoint. Barnacules over at Nerdgasm has this exact board too. The great thing about this board, it is something that you wouldn't need to upgrade so all upgrades would be mic based.

If I was to remove the word "USB" from your question then hands down the answer would be the SM7B from Shure, this is a professional mic used in podcasts and radio alike. You can see it being used in:

Joe Rogan podcast

H3H3 Podcast

Nintendo Voice Chat

If I looked hard enough I am pretty sure I could find tons more. Now do not get me wrong, this mic is pretty expensive BUT you didnt put a budget down sooooo........ yea. You could get that mentioned interface and a decent like $100 mic (like Shure SM58, literally the most common mic in the world) and be good until you upgrade.

My experience: I am a university trained audio engineer

u/burniemcburn · 5 pointsr/Beatmatch

What clubs have you been in that you've seen the trim and masters maxed out? I've swatted dj's hand away when they try to do shit like that, no way is that happening in any self respecting venue. Yes, it's less likely to clip and distort on Pioneer gear, but in no situation is it ok or expected that anyone is solidly in the reds like that. I don't let DJ's hit anything higher than just the first red LED on the master channel, and even then only tickling it. What we do have is a ton of limiting and compression to keep the volume right where we set it on a given night.

For a mobile/live setup that you're looking at, rather than a full rack of processing hardware, I'd recommend grabbing something like a Soundcraft UI12 or a Behringer XR12/Midas MR12. A small wireless mixer would be a much more cost effective and flexible setup for you right now than a huge bunch of rack hardware, in my opinion. They've got plenty of onboard routing, effects, and dynamics processing like compression and limiting, and all controllable from an iPad or your phone. The Behringer/Midas have a really nice selection of processing effect units available as sends and inserts on any channel, and the Soundcraft is really easily accessible from a user interface perspective. Pretty much everything you need to operate as a mobile DJ, and even audio for small bands is pretty doable.

u/djblender · 5 pointsr/Beatmatch
u/djscsi · 5 pointsr/Beatmatch

The easy way around this is to plug everything into a small line mixer like this one. Then everyone can happily plug/unplug their gear without interrupting the music. This is assuming there are no spare line inputs on the mixer you're using for the CDJs.

Also the S2 has RCA and TRS (1/4") outputs. No XLR.

u/fluffyclownfish · 4 pointsr/audio

About getting an amplifier:
A power amplifier is basically a device that converts a low power signal to one that is directly fed to the drivers of a loudspeaker, otherwise you wouldn't get any sound ('mic level' and 'line level' signals are too low for loudspeakers)!

Since the B112D is a powered loudspeaker, the amplifier is included in the unit. This means you don't have to go out an buy one separately.

About getting a mixer:
A mixer is a device that takes multiple audio inputs, performs some modifications to the signal (e.g. equaliser, compressor), combines the signals, then spits it out.

You don't really need a mixer if you only have one audio source (sounds like you'll only need one since you're planning to use it for music). Even if you're hoping to mix several sources, the unit itself has individually adjustable gain settings for two discrete inputs. If you need any more than two inputs, the Behringer Xenyx 802 should suffice.

If you're hoping to get a mixer to use multiple speakers, you can simply daisy-chain the speakers together (this means you won't get any stereo separation but 1. it's a pool party, who cares and 2. you probably won't get a stereo signal anyway if you use most mixers). Plug the main input into 'Input 1', then connect your second speaker to the first by connecting an XLR cable to 'Mix Out' on the first speaker, to 'Input 1' on the second.

My advice would be to go out and buy a 3.5mm to XLR male cable, and use that to connect your phone/computer to 'Input 1' on the speaker. If you have a second set, follow the instructions for daisy-chaining above. Do that for however many speakers you have. Good luck!

u/Drigr · 4 pointsr/podcasts

Is your co-host local? If so

  • Behringer Q1202 USB Mixer - $100 (Amazon)

  • Behringer XM8500 X2 - $20ea (Amazon)

  • Good XLR cables - I've been told you should be spending around $15 per cable, but buy what's your comfortable with.

    If they aren't local? I know blue makes some higher tier USB mics.
u/HeroDanny · 4 pointsr/Patriots

I enjoyed it! I had a question though, what mic are you using? I think the audio quality could be GREATLY improved with a condenser mic. Some of the voices sounded tinny and actually kinda hurt my ears because of it. It's not your voice, it's the mic.

A great condenser mic I can wholeheartedly recommend is the Shure SM58 Get that and a mixer, I use the Behringer Q1202USB Mixer. With those you will have FAR superior quality. They're really not that expensive either, I recommend getting the 4 channel mixer in case you ever want to expand with more people. But they do offer cheaper 2 channels. The SM58 mic is amazing quality for the price you pay.

If you fix the audio then I'll listen in every week for sure, also having the good audio will really allow you to compete with bigger podcasters like PFW.

u/BangsNaughtyBits · 4 pointsr/podcasting

The cheapest mixer I would consider would be a Behringer Q1202USB ($100US). 4 XLR jacks, a USB connection to a computer to record and a couple Aux Sends so you can do a Mix-Minus for Skype guests if you want.

http://www.amazon.com/Behringer-Q1202USB-12-Channel-Mixer/dp/B00CTKI45M/

Any XLR mics would work. I usually recommend the Audio-Technica ATR2100 USB ($60US)

http://www.amazon.com/Audio-Technica-ATR2100-USB-Cardioid-Dynamic-Microphone/dp/B004QJOZS4/

or it's nearly identical cousin the Samson Q2U

http://www.amazon.com/Samson-Handheld-Microphone-Headphones-Accessories/dp/B001R747SG/

which is easier to fine outside of the US.

You can go cheeper and look for a deal on some cheap Nady or Behringer mics.

Maybe a 3 pack of these for $40US plus one spare. They don't look like they come with cables and such like the others I mentioned above, though.

http://www.amazon.com/Behringer-ULTRAVOICE-XM1800S-Cardioid-Microphones/dp/B000NJ2TIE/

Or Nady

http://www.amazon.com/Nady-SP-4C-NADY-Dynamic-Microphone/dp/B00009W40D/

Not my favorite but at $10US it's hard to argue with and comes with XLR to 1/4" cables.

!

u/tek_fox212800 · 4 pointsr/FL_Studio

Happy Cake Day duder! Here are my suggestions!

Under 100$

[Lexicon Alpha](http://www.amazon.com/Lexicon-Alpha-Desktop-Recording-Studio/dp/B000HVXMNE/ref=sr_1_1?
ie=UTF8&qid=1412270622&sr=8-1&keywords=lexicon+alpha)

Scarlett Solo

Tascam US-32

Over 100

Scarlett 2i2

M Audio M Track Plus

Steinberg UR22


Personally, I use the UR22, mainly because I need the Midi in/out for my outboard synths, and the d-pre amps are quite nice for basic mics. I work for a music shop, and our best seller is the UR22. However, any of these interfaces would work well with FL Studio, and you would not be displeased with any of them. Let me know which one you get, dude! Cheers!

Ninja Edit - Stay away from Behringer, Gemsound, Pyle, and Pyramid. They are low cost, but have poor quality builds, poor converters, latency issues, and a myriad of other problems. Also, if you need multiple inputs and mixing capabilities down the line, I suggest these;

http://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Mixer/dp/B00IBIVL42/ref=sr_1_1?ie=UTF8&qid=1412271070&sr=8-1&keywords=yamaha+mixer

http://www.amazon.com/Yamaha-Audiogram-6-audio-interface/dp/B001F1WNAS/ref=sr_1_1?ie=UTF8&qid=1412271058&sr=8-1&keywords=yamaha+interface


u/ProfessorDaen · 4 pointsr/Twitch

Just a quick thing to mention, the AT2020 is not a Dynamic microphone as OP requested. The Shure SM58 ($100) would be a great starter, it's a solid microphone and priced well.

I personally use a Rode Procaster ($230) and Yamaha MG10XU ($200) and think the sound is great, though the mixer is almost certainly overkill so it ends up a little out of budget there. The Scarlet 2i2 u/Triksterism mentioned is a very popular and solid choice for the interface.

Edit: Either I'm stupid or reddit's new interface makes it a pain in the butt to create links compared to the old system.

u/mathewpeterson · 4 pointsr/UsbCHardware

My suggestion is to have two docking stations and then use a usb switch (https://www.amazon.com/dp/B00BD8I2OY) for your mouse and keyboard.

To be even fancier, you can use Synergy by Symless to share your mouse and keyboard over the network. You could also get this sweet audio mixer to get audio from both computer into a single headset or speakers: https://www.amazon.com/dp/B01M68UK38

This is basically what I do for my work and home computer.

u/kachunkachunk · 3 pointsr/Chromecast

I plug the Chromecast Audio into the aux-in for my PC, then in Windows' Sound -> Recording -> [your sound card's aux-in] -> Properties -> Listen, flag it as "Listen to this Device"

Also confirm your levels and whatnot.

This introduces a small latency (I forget... maybe 400ms) in Windows' mixer for that input, so you may need to tweak your Google Home setup to delay the other Chromecast Audios a little bit (if you have multiple Chromecast Audios). Otherwise if it's just the one, it won't matter one bit!

Though on that note, just being in another room will necessitate a bit of latency tweaking anyway; that's just how sound works over distance.

Edit: I think using two different Sources with a normal splitter will introduce interference/noise. It's fine splitting to two outputs from one source, though. The Chromecast Audio is technically a source since it's outputting streaming audio to your speakers. The right way to combine two sources is using a mixer. Steinberg-Yamaha makes pretty good ones, but generally you can get a couple of channels mixed together at a good quality for $70-200 CAD pretty readily.

Edit 2: Here are some examples in Canada:

A small mixer: https://www.amazon.ca/Premium-5-Input-2-Bus-Preamp-British/dp/B000J5UEGQ

A USB audio device with built-in mixer/amp: https://www.amazon.ca/Steinberg-Advanced-USB-Studio-Interface/dp/B003WI3LNU/ref=sr_1_8?s=musical-instruments&ie=UTF8&qid=1511565564&sr=1-8&keywords=steinberg (I use one of these for other purposes, but I don't remember it costing this much)

u/tails_the_gay_fox · 3 pointsr/synthesizers

The 70cdr outputs line level split stereo audio on the output. First off it is not meant to drives headphones, the cheaper and less featured g1on is designed to output to headphones and thus has output volume control and a proper stereo headphone / line out combo. Your best bet is to get a cheap mixer like this https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ and run the zoom into it so you get volume control and proper headphone driving capability.

u/Shake_Oh · 3 pointsr/microphones

I see in the comments below that you've already returned it, if you are willing to use a mixer the setup I would recommend to start would be:


Behringer Xm8500


Windscreen


XLR Cable


Behringer Xenyx 502


RCA to 3.5mm


All this is less than $80.

A stand like this would work well, and it is still below $100.

Here is a sound sample I found on YouTube.


Once you have more money to play around with for dynamic microphones look into: Shure SM58, Shure Beta 58, and the EV ND767A. These will run you roughly $100-$150.


Once you have a use case for condenser microphones look into: AT2020, Samson C02 Pair, and MXL 770. All of these will run you roughly $100, however if you went with the Samson C02s you would need more inputs and therefore a different mixer.

u/Magester · 3 pointsr/letsplay

What mind of mic are you using? When I first thought of getting into stuff I got a USB condenser mic (Blue Snowball) and they're terrible for lets play if your a PC gamer, especially with a mechanical keyboard. Condenser mics make quiet louder and louder stuff quieter.

If that's your issue then I suggest getting a dynamic mic. Either a USB one or preferably an XLR one and a mixer, and I can recommend several that aren't bad on the budget.

Pyle-Pro PDMIC58 with a Behringer Xenyx is what I switched to after the Snowball and was much happier.

Now I use an Audio-Technica ATR2100 and a much fancier mixer (I've also bought a 2nd of the pyle mics, and now use both of those for recording couch coop stuff with a friend).

u/hellyeahmane · 3 pointsr/FL_Studio

Setup? As in equipment right? I’m pretty sure that mixer is this Behringer Xenyx 502 Premium 5-Input 2-Bus Mixer with XENYX Mic Preamp and British EQ https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_api_i_I5BZCb5EM3X5V
The rest idk lol

u/wcwouki · 3 pointsr/headphones

I have several smallish mixers from Behringer, they have all worked well for me over a couple of years time. The Xenyx 502 is 5x7 inches, has enough inputs for your specifications and sells (in the US) for $39.
https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ/ref=sr_1_2?ie=UTF8&qid=1536945694&sr=8-2&keywords=micro+mixer
I don't have this specific model but a couple of smaller ones (302usb) and a couple of larger ones. I use them to route sound from three pcs, a line 6 interface and a Zoom multi fx pedal to my powered desktop monitors and headphones...works for me.

u/kasim0n · 3 pointsr/linuxaudio

Probably the easiest way to connect your Mic to the audio interface is with a cheap analog mixer with xlr input (for example the Behringer Xenyx 502). This will give you *way* more control over the sound from your mic, be it the input gain, the panning or the equalizer. If the signal that reaches your audio interface is shitty, no amount of tricks/filters will improve the sound.

u/danintexas · 3 pointsr/Bass

Thanks to /r/bass I am using the following:

http://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1377281189&sr=1-1&keywords=behringer+502

http://www.amazon.com/Hosa-CMP153-Cable-Inch-Dual/dp/B000068O3C/ref=pd_bxgy_MI_img_y

The latter plugs into my computer. headphones on the mixer. I can listen to click tracks or MP3s from the computer and bass all through my headphones. All in all it is cheap and gets the job done.

u/blamsberg · 3 pointsr/chiptunes

this little guy is pretty popular and works well. if you're plugging in a game boy you are going to absolutely want some EQ to boost the bass. the other option would be a USB audio interface for your laptop, and that is a discussion worth having depending on what your needs are, but the mixer alone will certainly suffice.

u/gunnarrambo · 3 pointsr/LocationSound

The best (and often only) way to improve your sound on no budget is to move your existing microphone closer to the source. There's no cheap way to get good audio from mics that are 10-15 feet away from the audio source.

Can you put the snowball on the boom closer to everybody? You say you're thinking about a shotgun on a stand, so it sounds like everyone is stationary. A usb extender would let you get it closer to everyone.

A shotgun might pick up everyone equally at 10-15 feet, but it isn't going to sound much better than the Snowball. If you can set it up closer, it isn't going to be good for 5 people because it's very directional, so it'll pick up one person fine and the rest will sound wrong. The Snowball Ice is directional, but has a wider pickup than a shotgun so it might work ok.

It sounds like you're doing some kind of talk show? You could get a non-Ice Snowball and set it between everyone, kind of like Rhett and Link do with their much nicer mic (A Moue by Blue).

Here are two other options that might work, but are probably bad ideas.

You could get cheap lavs on Amazon for everyone and run them into everybody's phones, though that's prone to user error.

You could get a bunch of cheap lavs and 1/4 inch adapters and find a cheap mixer like this and run that into your computer.

u/nastdrummer · 3 pointsr/drums

The best thing I have used is an isolating in ear headphone and a microphone. With this setup you can play all-out while still being at a comfortable ear volume. Not only is there no muffling/distortion like regular earplugs but you can have super sensitive, low volume, hearing depending on your mic placement.

I use a single SM57 on a mic stand over my head. Plug it into a mixer, one like this would allow you to mix in a track to play with. Then I out to a pair of Shure SE215s that have decent sound response but best feature are they isolate well and are less the $100. If you were going for this setup from scratch it would cost about $250. But isolation with input is by far the best sounding ear protection I have ever used.

u/doougle · 3 pointsr/audio

Here's a cheap mixer.

There are some nice usb interfaces (I like Focusrite) that might work for you. (rather than the mixer). But it will depend on your software.

u/salnajjar · 3 pointsr/karaoke

You're going to need a mixer, to take the audio from the microphones and the karaoke backing track and then put out the final version (also some people sing louder than others so you'll need to be able to adjust individual volumes).
This means you'll also need an amplifier, as most TV's don't have an audio in connection.
This means you'll also need speakers.

You could look at getting some decent amplified speakers, you only need one if you're doing this in a home.

Lastly, look into something like Karafun initially as the software. You can take out a 48 hour subscription for about £5 and then you have access to all their songs. Just read about no internet at farm, not even wireless data that you can tether via mobile phone?

So to recap, you need to purchase:

u/Naaackers · 3 pointsr/Twitch

Hey there dude,

You're going to want a mixer for that. The quality of audio going from audio out on one pc to mic in on the other will sound terrible, and most likely cause some ground noise loop problems.

If you're not looking to spend any money, I would recommend checking out NDI. It's an OBS plugin that would allow you to send your game video and audio over to your streaming PC over a wired network connection. As long as both your PC's are hardwired to your network, you're good.

Here is a permalink to another thread where I explain how NDI works, and how you can learn about it. In this thread i'm talking about VR, but the process would be the same, just capturing normal game play instead of VR.

Alternatively, you could spend as little at $60 on a mixer to make what you need happen, if you decide to go that route. Good luck!

u/onemanshownetwork · 3 pointsr/podcasting

If on a budget:

I like the Behringer q802usb for a mixer $65

2 ATR 2100 Mics $80 a piece

If you want to spend more on a mic that won't pick up as much noise:

Sennheiser E835 Dynamic Cardioid Vocal Microphone $100 a piece - but doesn't come with stand or pop filter...

Audio-Technica ATH-M30x Headphones to monitor sound or edit. $70

If you want your partner to have headphones, you will need a headphone amp $25 and chord $7

If you have any questions I have a Facebook Group for beginners: Podcasting Made Simple

u/uncommon_sc2 · 3 pointsr/podcasts

I wish someone would have given me this list when I started. For about $360 the list below gives you everything you need. I highly recommend against recording on your phone. There is also a lot of great free software out there for recording video for both PC and Mac. I use XSplit personally, even if I'm not streaming. You could probably find the light set without the green screen for a little cheaper if you want, but I wouldn't go any cheaper on the microphones, soundboard or webcam. With all this you'll have a semi-professional setup at an affordable budget.


2x Microphones ($70) https://www.amazon.com/gp/product/B00XOXRTX6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


2x Microphone XLR Cables ($20) https://www.amazon.com/XLR-Microphone-Cable-Feet-Female/dp/B06XC6435F/ref=sr_1_1?ie=UTF8&qid=1503965340&sr=8-1-spons&keywords=xlr+male+to+female&psc=1


1 USB Mixer ($60) https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_3?ie=UTF8&qid=1503964969&sr=8-3&keywords=xenyx


Light Set ($150) https://www.amazon.com/gp/product/B019GTCNXC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


Webcam ($60) https://www.amazon.com/gp/product/B006JH8T3S/ref=oh_aui_search_detailpage?ie=UTF8&psc=1




u/DrunkieMunkie · 3 pointsr/Twitch

Hola! I set all this up last year so it’s a bit rusty!

This is a shopping list for an Xbox One mixer setup similar to mine and you may need some help filling in a few gaps and the wiring!

So the idea is to build a setup to be able to use an awesome mic to talk to the stream as well as party chat ‘at the same time’ (which I prefer over using a headset) but to also be able to hear game/chat/PC audio though a single pair of headphones and control their volume levels in one place with ease.

I don't need sound going out to my PC as the Cap card is getting that from the Console via HDMI.
Streaming Xbox to PC then the WORLD!

Xbox – hdmi into a cap card in the PC Avermedia live gamer hd
http://www.amazon.co.uk/AverMedia-61C9850000AE-Avermedia-Live-Gamer/dp/B007SRYAPO/ref=sr_1_2?ie=UTF8&qid=1447858313&sr=8-2&keywords=live+gamer+hd
This grabs the game audio and that’s that bit done, stream using OBS and boom!

Here's is my shopping list for party chat:

Mixer

http://www.amazon.co.uk/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_1?ie=UTF8&qid=1415150891&sr=8-1&keywords=behringer+mixer
Headset Buddy (Real name, I didn’t make that up!)

http://www.amazon.co.uk/Headset-Buddy-Adapter-PC35-PH25-Computer/dp/B002D41HKS/ref=sr_1_3?s=electronics&ie=UTF8&qid=1421341934&sr=1-3&keywords=headset+buddy

Xbox Chat Thing:

http://www.amazon.co.uk/Xbox-One-Stereo-Headset-Adapter/dp/B00IAVDOS6

Cable from Buddy to Mixer:

http://www.amazon.co.uk/Hosa-CMP159-Stereo-Breakout-10-Feet/dp/B005HGM1D6/ref=sr_1_1?ie=UTF8&qid=1415150937&sr=8-1&keywords=hosa+cables

Cable from Mixer to Buddy!

http://www.amazon.co.uk/HosaTech-CMS-105-3-5mm-Stereo-Interconnect/dp/B000068O35/ref=sr_1_1?ie=UTF8&qid=1447857349&sr=8-1&keywords=3.5mm+TRS+to+1%2F4+inch

Xbox Mixer(s)

Astro Mixamp (I use)
http://www.amazon.co.uk/ASTRO-Gaming-3AM99-HBU9X-975-ASTROGAMING-MIXAMP/dp/B004L6C6BK/ref=sr_1_4?s=videogames&ie=UTF8&qid=1447856882&sr=1-4&keywords=astro+mixamp

Earforce DSS (an option!)

http://www.amazon.co.uk/Force-Channel-Dolby-Surround-Processor-Mac/dp/B003O0KICS/ref=sr_1_1?s=videogames&ie=UTF8&qid=1421378828&sr=1-1&keywords=dss1

Ground Loop things:

http://www.amazon.co.uk/Headphone-Ground-Isolator-Filter-Stereo/dp/B00INV5LB6/ref=pd_sim_sbs_23_1?ie=UTF8&dpID=41-9H3Hc3mL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=1TTNMJANJDTK26VVSAE7

Although I have used these ones because I didn’t see the ones above!

http://www.amazon.co.uk/AV-Link-201-086-Skytronic-Isolator/dp/B000NVWB9O/ref=sr_1_1?ie=UTF8&qid=1447857227&sr=8-1&keywords=Ground+Loop+Isolator

Mic wise any XLR mic is fine!

Here is a link to a image i found that kinda helps piece it all together! http://imgur.com/UYaQQUZ

Here is a quick vid of my setup, happy to help if i can! http://www.twitch.tv/drunkiemunkie/v/26306849

Heres is my latest Xbox One vid with party chat but it picks up the Public Lobby if they speak!
http://www.twitch.tv/drunkiemunkie/v/31799799

dM

u/supizky · 3 pointsr/audiophile

A small mixer will do the trick and it also gives you the chance to adjust the volumes of iPad and synth independently.

You could use a basic DJ-mixer (something like this) or a simple studio mixer like this.

u/ex1treality · 3 pointsr/drums

A few things:

  • To set your expectations, spending $400 on a recording setup is like spending $400 on a car. It will get the sound from point A to point B, but it won't be pretty. That being said, if you really get into it, you can always upgrade ($400 is a drop in the bucket compared to what you'll end up spending, if you're serious). At least this way you can have some fun with your friends.
  • You can condense to a couple channels if you run it through a mixer first (something like this) but you will have no control over the individual levels once you've recorded. If you're going to condense down to, say, 4 channels, better to stick with 4 mics.
  • Your list looks good in terms of hooking everything up. As others have mentioned, have you considered what audio program you're going to use when you start recording? You might try Reaper or Ardour if you're looking for something free. Otherwise, the cheapest you'll probably get is Live 9 Intro for $99.
u/bluetshirt · 3 pointsr/WeAreTheMusicMakers

There are small mixers that have built in effects. The Behringer Xenyx 1202fx is your budget solution here.

This is all you need.

http://www.amazon.com/Behringer-Xenyx-1202fx-Mixing-Console/dp/B000J5Y214

If you were to use an outboard reverb like a pedal or rack unit, if you're using a mixer that has an Aux bus or FX send, you would not need multiple reverb units. The mixer will combine all the sounds for you and then send those to the pedal through a single cable.

u/yacht_boy · 3 pointsr/livesound

Thanks for this. I just ordered a whole pile of stuff on Amazon with Prime. Came out to be a good bit cheaper than your estimate. I traded down on a couple of things like the vocal mics (Behringers for 1/3 the price) and direct boxes (half the price). The big thing I skimped on to make my budget was the mixer - I got a Behringer 12-channel mixer with great reviews for about $90. Hopefully it will get the job done.

Definitely couldn't have figured out what to buy without you. Hopefully this is everything we need for a great summer and beyond!

u/bite_down_hard · 3 pointsr/synthesizers

I own this mixer and I won't say it's great, but if you need an inexpensive way to unify the audio output of various devices this will do that for sure. I mean obviously there are better mixers out there but to give you a place to start there's one.

You will also want a sequencer of some sort, I don't have any recommendations on hardware for that, I am still figuring that part out, I use Ableton for now.

u/nbta · 3 pointsr/podcasts

If you ever want to have callers/skypers/etc. on your show, make sure you get one that you can do a mix-minus with. Basically you'll want a mon-send or an fx-send. Look for at least a 2-bus mixer or you'll be limited to a single mix-minus connection.

I have a Behringer Q802USB - I should have just bought the 802 (not USB) for $15 less. Here's a little secrete I didn't know when I bought it - you can't use the USB bi-directionally. You're EITHER sending audio to the PC or receiving audio from the PC. So it didn't work for my needs to monitoring incoming audio from the PC and send my mic feed at the same time. I ended up buying a UCA202 USB interface and that solved my problem.

You'll hear the Behringer's are noisy. They are. If you drive the gain it gets really hissy. BUT keep the levels down and it works just fine. For under $80 it's really hard to beat.

If you're on a budget, and want to record 3 mic, I would maybe take a look at these:

Behring 1202
http://www.amazon.com/Behringer-1202-BEHRINGER-XENYX/dp/B000J5Y282/ref=sr_1_1?ie=UTF8&qid=1421430697&sr=8-1&keywords=behringer+1202

Alto Professional ZMX122FX
http://www.amazon.com/Alto-Professional-ZMX122FX-8-Channel-Preamps/dp/B004TM31FG/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1421430794&sr=1-2

Mackie 802VLZ4
http://www.amazon.com/Mackie-802VLZ4-8-channel-Compact-Quality/dp/B00EDHWLFI/ref=sr_1_33?ie=UTF8&qid=1421430841&sr=8-33&keywords=audio+mixer

Yamaha MG10XU
http://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Mixer/dp/B00IBIVL42/ref=sr_1_61?ie=UTF8&qid=1421430887&sr=8-61&keywords=audio+mixer

For a really inexpensive 2-bus mixer with a sub-group, maybe the Behringer Eurorack UB1204. You get 2 aux sends + a 3-4 submix. I've not heard anything about these mixers - so I can't tell you if the mic pres are at all acceptable. Anyone will tell you if you're serious to stay away from Behringer.
http://www.amazon.com/Behringer-UB1204-PRO-BEHRINGER-EURORACK/dp/B00551VDIM/ref=sr_1_sc_2?ie=UTF8&qid=1421430950&sr=8-2-spell&keywords=behringer+euroack

u/Amking4 · 3 pointsr/Entrepreneur

Are you going to be running your mics through an audio board (I would suggest that) or try to go straight into your computer?

These are the mics I use:
http://www.amazon.com/MXL-990-Condenser-Microphone-Shockmount/dp/B0002GIRP2/ref=sr_1_3?ie=UTF8&qid=1422462371&sr=8-3&keywords=MXL

Windscreen:
http://www.amazon.com/Nady-MPF-6-6-Inch-Microphone-Filter/dp/B0002CZW0Y/ref=pd_bxgy_MI_img_y

Audio board
http://www.amazon.com/Behringer-1202-BEHRINGER-XENYX/dp/B000J5Y282/ref=sr_1_19?s=musical-instruments&ie=UTF8&qid=1422462418&sr=1-19&keywords=audio+board

These are doing to be your main components, if the mics are too expensive I can recommend some cheaper ones. Ideally you want to record to hardware (not your computer) then transfer it. I usually also record on my computer as well just to have a backup. I use Audacity to record on my computer

I use this to record to SD cards to put it on the computer.

http://www.amazon.com/Zoom-Handy-Portable-Digital-Recorder/dp/B001QWBM62/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1422462555&sr=1-2&keywords=h2n

Let me know if you have any questions.

u/kaXcalibur · 3 pointsr/podcasts

If this is the board you're referring to, it actually is an audio interface.

This will potentially allow for multitrack recording, giving you more control over each person's volume post-recording.

That's the difference between running audio out from a traditional mixer and running audio from an AI.

If you have to run the audio as a traditional mixer, you'll have good control over each person's volume pre-record. But, it'll all go into one mixed track. The biggest drawback here, is that if someone starts talking over someone else, there would be no way to really clean that up if you needed to.

Multitrack recording would allow you to mute somebody or lower there volume if they were talking over another person, or if they were a heavy mouth-breather and you wanted to cut some of that out while other people are talking, etc.

Overall though, I think you have a great setup to start.

What are you using to record? I recommend Audacity. It's free and a good starter software with a lot of features, including multitrack recording, if your equipment is compatible. I know a lot of people go to back for Reaper, which I believe has a fully functional trial version, but costs $60ish I think to purchase.

You might also consider mic stands (either table top booms or arms) so that you don't have to hold the mics in your hand. But, that's up to you. You'll have to be careful about things like dropping the microphone, bumping against something or even how you hold it in front of your face.

As far as headphones, as certifiedrotten pointed out, you'll need a headphone amp. Really, headphones are up to you. They're not vital, but they could be a nice thing to upgrade to later.

I would just suggest doing some trial recordings, get comfortable with your settings and play around with your recording software (AKA DAW) and get a feel for how your voice sounds, where and how to hold the mic, etc.

Good luck with your podcasting!!

u/k-murder · 3 pointsr/podcasts

Don’t go with usb. You can only use one usb mic per computer so if you are recording 3 people you can only ever use one mic. It’s also never going to give you very good audio of you have people just pile around a mic. You can get 3 cheap dynamic mics, a mixer and 3 XLR cables for around $140 total

microphone package
mixer
XLR cables

u/CricketPinata · 3 pointsr/podcasts

If it's just you and your buddy and you aren't doing any Skype call-ins, and you guys can both be in the same room all you'll need is...

Two mics:
ENTRY/BASIC: https://www.amazon.com/Audio-Technica-ATR2100-USB-Cardioid-Dynamic-Microphone/dp/B004QJOZS4/ - $64.00 American - $128 total.

Intermediate: https://www.bhphotovideo.com/c/product/356521-REG/Audio_Technica_AT2020_AT2020_Condenser_Microphone.html - $99.00 American - $200 total.

Two XLR cables: https://www.amazon.com/dp/B01JNLTTKS/ - $5.99 American - $12.00 total.

One XLR-to-USB setup: https://www.amazon.com/dp/B00CTKI45M/ - $99.00 American

Two Scissor Arms: https://www.amazon.com/Adjustable-Microphone-Suspension-Broadcasting-Voice-Over/dp/B00DY1F2CS/ - $12.99 American - $26.00 total

Two Pop Filters: https://www.amazon.com/Neewer-Studio-Microphone-Filter-Shield/dp/B00ACFAULC/ - $6.95 American each - $14.00 total.

A DAW: Audacity - Free - https://www.audacityteam.org/download/

TOTAL BASIC COST: $280-355 American

If you need to do a Skype call Mix-Minus it will cost an extra $20-50 depending on how you would like to do it.

u/Pyroraptor · 3 pointsr/letsplay

The Rode podcaster is a REALLY great mic. However, it is also a dynamic mic which has a low sensitivity. It is meant to be used a few inches from your mouth and probably would not be very well suited for picking up multiple people.

The best way to mic multiple people on a single recording is to get several XLR dynamic mics and feed them into a mixing board or preamp. The Akai EIE is great for this because you can have multiple audio streams output to your computer. However, a Behringer Xenyx 1202USB or a Tascam 1200 would work well too. Pair that with a few

If you want to do mic multiple people with one mic then you're looking at a condenser mic. For the price of your podcaster($230) I have a few suggestions. I would still look at getting an XLR setup, because they are much better IMO.

u/adam_of_adun · 3 pointsr/letsplay

Here is our usb mixer setup. We run XLR mics (60 bucks for a 3 pack).

Link: BEHRINGER, 12 Mixer - Powered, Black (Q1202USB) https://www.amazon.com/dp/B00CTKI45M/ref=cm_sw_r_cp_apa_i_CMTXDb9TG5MT6

Like I said above, it's usb and we record using Audacity.

Here is an example of us with a blue snowball:

https://youtu.be/ksLciGbLDfY

Here is an example with the xlr mic and mixer:

https://youtu.be/ksBsOAKj3U8

The best thing...we can tune it to a particular vocal range. Don (guy on the left) has deeper tones, while Beau (guy on the right) needed emphasis on the mid range.

We just export to mp3 when we are done recording. It's been a game changer for us.

u/MoogleMan3 · 3 pointsr/buildapc

In your situation, I'd get a good mixer, like this one or this one, and out of those mics, I'd skip all of them and get a good dynamic mic instead. I use the AKG D5 and love it. I used the audio technica ATR2100, shure SM57 and SM58 as well, and liked the D5 over all of them.

Edit; Actually, reading your post again, a good usb audio interface will do you well too, though you won't have as many adjustments as a mixer will give you.

u/continuumdrag · 3 pointsr/podcasts

We are looking at setting up an very basic, in-home podcast studio. Would anyone mind weighing in on what we are considering?

​

The podcast is primarily two hosts with an occasional guest (3 ppl max). Its all conversational. It doesn't need to be perfect, we are just hoping for a reasonable audio quality. We aren't trying to break the bank. So my research has been low end but quality items.

​

Here is the purposed setup:

u/LaRivalita · 3 pointsr/Ice_Poseidon

https://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Effects/dp/B00IBIVL42

Here you go. Ice said he got it used for $50 on Craigslist.

u/drsteve103 · 3 pointsr/synthesizers

LOOP MIXER - Portable Audio Mixer with 5 Channels, 5 X 3.5mm Stereo / 10 X Mono Inputs & 3 Outs https://www.amazon.com/dp/B01M68UK38/ref=cm_sw_r_cp_apa_0HbhAbP4VM96A

This one has 3.5mm jacks, so no adapters needed.

Enjoy!

u/MacZyver · 3 pointsr/synthesizers

This looks to be perfect for you though it's roughly 3 times more expensive.
LOOP MIXER - Portable Audio Mixer with 5 Channels, 5 X 3.5mm Stereo / 10 X Mono Inputs & 3 Outs

u/buildmake · 3 pointsr/OPZuser

I got the Maker Hart Loop Mixer for exactly this: https://www.amazon.com/Maker-Hart-LOOP-MIXER-Portable/dp/B01M68UK38

​

It's small (75% width of the OP-Z, and about twice the height of one), has 5 stereo 3.5mm inputs, separate line out and headphone jack. Requires DC power and no battery, which is the only downside. Perfect for a small desk setup, and very easy to travel with.

u/sik-sik-siks · 3 pointsr/audio
u/DiNitride · 2 pointsr/audio

You would want a mixer similar to this: https://smile.amazon.co.uk/Behringer-802-Input-Bus-Mixer/dp/B000J5XS3C/ref=sr_1_6?ie=UTF8&qid=1525617928&sr=8-6&keywords=audio+mixer&dpID=61W%252B4lk8wqL&preST=_SY300_QL70_&dpSrc=srch

Using lines 3/4 for PC audio and 5/6 for the turntable. Then main out to your speakers. Unless your wireless headphones have any kind of line in jack on the transmitter then I would assume that it is not capable of being used with a mixer.

u/MrCarltonBanksIII · 2 pointsr/microphones

I was thinking possibly 50/50. I bought a Blue icicle and the PX22 amp. I have a question though, is this interface a good interface? It seems to have 48v phantom power and I would assume that it is much more reliable than the icicle

u/TheLegionlessLight · 2 pointsr/Twitch

Wish I had seen this before I bought a Behringer Xenyx 802 and an Audia-Technica AT2035. I just can't get rid of all of the background noise from my wife in the living room with me watching tv (an office would be dope but not right now).

u/Necromesmer · 2 pointsr/keys

My rig is all packed up from moving but it is a small 12 channel with FX and 4 channels of phantom power. Not more than $149 or $200 new. Something similar but an older version of this Behringer Xenyx 1202fx Premium 12-Input 2-Bus Mixer With Xenyx Mic Preamps, British Eqs And 24-Bit Multi-Fx Processor https://www.amazon.com/dp/B000J5Y214/ref=cm_sw_r_cp_apa_-bcEybWNWYCZ4


Sound guys love the fuck out of me. You just need to make sure all of your stuff levels out on your end before you go sound checking.

u/acoustic12stringer · 2 pointsr/WeAreTheMusicMakers

I use a Fishman SA220 PA in my duo; I've played with drummers and multiple other guitarists with this rig, and had plenty of power. Transports and sets up very easily.

To get four mics going in, you'll need a mixer; the SA220 only has two input channels. I use this exact setup in all my gigs, to handle two guitars and two vocal mics. I use a Behringer mixer for this purpose.

u/dieyoung89 · 2 pointsr/nfl

Disclaimer: We were/are complete amateurs and I had zero experience with anything related to editing before I started so take what I say with a tremendous grain of salt.

I just used Garageband on a Macbook to record and edit. Never had any complaints with that program. I paid for a license to use someone else's music as the intro theme and paid an artsy friend draw up our logos.

This is the mixer I used. I don't know what a lot of the knobs are dials are for, but I learned the basics and it worked fine as far as I can tell. I bought Audio Technica dynamic microphones and I liked them for a while but two of them just stopped working eventually.

I hosted it on Libsyn. They have several options depending on how often you'll be releasing episodes and how much subscriber statistics you'd like to see. Loved this service.

In terms of "getting it out there", I don't have a ton of advice. We never reached a lot of folks, but we didn't really try to either. Our goal was to just watch fun movies and sit around joking about them. I still have a few people who reach out every so often and ask about new content but that's about it in terms of our "listener-base".

If you're going to record with other people, make sure you're on the same page in terms of quality and style. If one person treats it seriously and the other is just winging it, it can make for a frustrating experience. All this being said, I think the best thing you can do is to make a podcast that you'd want to listen to. Good luck, and sorry I don't have better information.

u/gigabyte898 · 2 pointsr/Beatmatch

Depends on what outputs you have on your controller. I have a DDJ-SX2 and it has XLR outputs, which is what most PA speakers use for input. My setup is Laptop->Contoller->Speakers. This is all assuming you have powered speakers as well. If your controller doesn't have XLR you'll want to go Laptop->Controller->Mixing Board w/ XLR outputs->Speaker. When I say external mixer I mean one of these. It has inputs for unbalanced connections and outputs for balanced. If your speakers are unpowered or "passive" you'll need to hook the outgoing signal into an amplifier before going to the speakers, so always get powered speakers if you can

The main advantage of XLR cables is reduced signal degradation. 1/4 inch and RCA cables work, but there's just two wires: signal and ground. When you have a single wire carrying electrical signals it essentially acts as an antenna. Any sort of background noise in the area will be picked up and heard on the speakers, usually a hissing or a hum.
With XLR you have three pins for each channel. One is a ground, and the other two have the same sound data but one is flipped. The receiving gear will flip the inverted signal back into its original orientation. Because both copies of the signal picked up the same noise as they traveled along the cable—and that noise is identical on the two wires in the cable—flipping the polarity of what arrives at the receiving gear will produce the original signal intact and noise which now has reversed polarity. Summing that gives you a welcome result: signal that’s preserved and noise that’s canceled. You can run an XLR for hundred of feet with very little noise, while unbalanced cables like RCA and 1/4 inch are recommended for no longer than 15-20 feet. It also means it takes a bit more power to use which is why they aren't on every controller, especially ones that connect just over USB and don't have an external power source. Converting unbalanced to XLR is pretty useless if you have a cheap adapter, but hooking it into an external mixer adds that extra power to the signal.

u/SolomonKull · 2 pointsr/metalmusicians

You need an "audio interface" for your computer, which is a box that has several mic inputs. Plug that into your computer, and your DAW should be able to record each mic/line on an individual track.

The alternative is to use a mixer with as many mic inputs as you need. The downside is that you're only going to get a single stereo recording with that, meaning that you need to get your drum mix through the board sounding as best as you can before recording, because post-processing isn't as easy when you only have a single drum track vs one track per mic.

If you're just cutting demos at home then a mixer will be fine, and a lot cheaper than an audio interface. But, if you can afford an interface, that's the way to go.

https://focusrite.com/usb-audio-interface/scarlett/scarlett-18i8

vs

https://www.amazon.com/Behringer-1202FX-12-Input-Multi-FX-Processor/dp/B000J5Y214/ref=asc_df_B000J5Y214/

u/CoAff · 2 pointsr/techsupport

Your absolute best bet is an external audio interface with XLR mic inputs if you want more than a single in mic input to a pc. You CAN use something called 'Voicemeeter' to try to use three USB microphones...but you're opening a headache inducing can of worms unless the PC has killer specs.

This interface is about $100US https://www.amazon.com/Behringer-1202FX-BEHRINGER-XENYX/dp/B000J5Y214

Couple that with 3 super cheap mics: https://www.amazon.com/Neewer-Professional-Broadcasting-Recording-Microphone/dp/B00XJF56O8

You'll need XLR cables as well but they're cheap too.

Best of luck.

u/damn_it_so_much · 2 pointsr/makenoise

this is the one i've been using: https://www.amazon.com/Behringer-1202-BEHRINGER-XENYX/dp/B000J5Y282 there's nothing really "lofi" about it, i get plenty of high end distortion from it. and it's pretty versatile, i'll use patch cables to route various channels through pedals and into inputs, and tweak knobs as i progress through the song.

Here's an example of something I've done using this set up (i recorded a live take and then overlapped two parts of that): https://clyp.it/rxpzbnx1?token=8c75dc57fec78caa06cb2c204f5865e0

u/ActionKbob · 2 pointsr/letsplay

You do need an XLR for mixers.

I bought the AT2020 USB mic first, and I had the same problem you are having, my PC fans were WAY TOO LOUD. And so I bought This Mixer and the XLR version of the AT2020

USB mics are great when you have a studio or if they are dynamic. USB condensers are only great if you use a studio.

The benefit of condensers is that they are great vocal mics. The pick up a very good range of frequencies, and allow your voice to come in crisp. But that also means that a lot of background noise will come with it, so you need to be able to reduce way comes through, and even still post editing is a must.

u/ZeroKarizma · 2 pointsr/podcasts

I also vouch for the Behringer XENYX 1202. It's relatively inexpensive and reasonably powerful. You'll also need one of these for USB interface:

Behringer UCA202 Audio Interface

u/XPEarned · 2 pointsr/podcasts

What we use :) Just grab some pop filters too.
Good luck!

http://www.amazon.com/gp/product/B000J5Y282/
http://www.amazon.com/gp/product/B002HJ61PK

u/cloudyskyle · 2 pointsr/synthesizers

If you are looking for a mixer that will have EQs on more than just the channels with microphone pres, I'd recommend this one. Still has 8 channels and effects as well. I can vouch that Alto is a pretty good mixer for the price. I've not had any issues with mine that I've had for 3 years. It's pretty compact for the channels as well. Hope this helps.

https://www.amazon.com/Alto-Professional-ZMX122FX-8-Channel-Compact/dp/B004TM31FG/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1493434497&sr=1-1&keywords=alto+professional+mixer

u/BeardedAlbatross · 2 pointsr/BudgetAudiophile

You could technically use your Pyle as a preamp volume control, but needing RCA to XLR/TRS and losing the benefits of balanced connectors would make it kind of not worth it considering how affordable mixers are.

Something like this Behringer Q1202USB would work perfectly fine and is cheap. Connects to your computer through USB. You can get them cheaper and simpler, or progressively more complex and expensive. Really up to you.

u/SOGOpod · 2 pointsr/podcasting

If that's the case, it'll certainly do the job.

Check Monoprice for cheap, good quality cables. They may even have a cheaper USB mixer, as well. I would also recommend you get a cheap headphone amplifier (Behringer makes a good, cheap one) or at least a headphone splitter (you'll lose volume, however, with each additional headset plugged in), and some 3.5mm to 1/4" adapters, so everyone can monitor audio, which helps keep recording quality up.


WARNING, I LINKED THE WRONG MIXER, REPEAT, THE ONE I LINKED ORIGINALLY IS NOT USB!!!!
This is the one I meant to link, my apologies! link

edit: fixed link in original post

u/Lilrex2015 · 2 pointsr/Twitch

i would suggest getting a mixer over a strict interface like the 2i2 or Mtrack, a mixer will give you all the features of an interface as well as a ton of extras like on board EQ, vocal fx, and multi channel support.

something like this is very popular with Twitch streamers

https://www.amazon.com/Behringer-Q1202USB-12-Channel-Mixer/dp/B008O517IW/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1483156636&sr=1-4&keywords=usb+mixer

u/handleCUP · 2 pointsr/podcasts

I use

https://www.amazon.com/Behringer-Q1202USB-12-Channel-Mixer/dp/B008O517IW

And its always been good to me. To be fair I haven't really tried others but this works well just grab a couple splitters for the headphones. The compressors on the 4 main inputs is quite useful although I'm sure there are better ways to compress it makes it easy for a noob

u/tardwash · 2 pointsr/podcasting

This mixer is what you need. I've used it quite a bit and it works fine. You can record directly into Audacity or Audition. The other commenters are right to note that Behringer does have bad reputation, but this unit happens to work okay. Their stuff has improved quite a bit recently.

u/WormsMedia · 2 pointsr/podcasts

Not to name drop but I met Maron at one of his shows a few months ago and he gave me a few tips for my setup. He recommend a good stage mic if you don't want to drop too much money. I went with these mics https://www.amazon.com/gp/product/B00IEVDOXC/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 and this mixer https://www.amazon.com/gp/product/B008O517IW/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 this mixer price is good the mics are a little pricey. You can get a shure set for cheaper. Hope this helps.

u/Zatore · 2 pointsr/audioengineering

Would not recommend this, Thunderbolt connections are not completely common at this point. The advantages of one aren't even necessary unless you need very low latency. A USB interface would work just fine, would recommend: http://www.amazon.com/Behringer-Q1202USB-12-Channel-Mixer/dp/B00CTKI45M/ref=sr_1_5?ie=UTF8&qid=1462939004&sr=8-5&keywords=4+channel+mixer This would work well considering it has 4 XLR pre-amps and a USB out so it also works well as an interface. Would also work well if OP doesn't want to mix inside the box.

u/fcisler · 2 pointsr/audioengineering

I can think of three alternatives:

  1. Small Mackie/Yamaha mixer. Something such as this already has two unbalanced inputs (tape) or two balanced inputs (line)

  2. A pre-made device. Such as this or this

  3. If remote power is a problem something like this could work, and this happens to be one of my favorite handy "adapters"

    The only possible downside I see with your idea is attenuation. You may not get a "hot" enough signal at the far end. A couple solutions I provided are powered and have some sort of trim/gain controls, so you might be better off with them. As far as the "no boxes on the ground", i'm not sure what you are getting at. Compact? Tamper proof? Weather resistant? What is the purpose there? It could be as simple as a outdoor electrical box and stuff whatever you need inside of it.


    I think if you were to better expand on what you were trying to accomplish I could provide some better answers.
u/zdelusion · 2 pointsr/Bass

I have one of these mixers that I use for blending all my shit together also lets me play through headphones if I want.

u/youraverageinsanity1 · 2 pointsr/audio

You're unlikely to find a mixer that has those inputs built in. Your best bet would be to use adapters for all those sources and just plug those in on the 1/4in jacks. Keeping in mind though that you should also look for mixers that support panning individual channels; each jack on a mixer typically just supports mono audio, so you'd have to send it back to left / right.

For example, I use a Mackie 402 on my desk. If I want to plug in a stereo line on channels 1 and 2, that "STEREO PAN" button has to be enabled to keep it from mono'ing them both.

Off the top of my head, something like the X Air series supports linking two channels and simultaneously controlling them + L/R panning them, for multiple channels, which you would probably need with your amount of inputs. A quick look and the Mackie ProFX12 would also probably suit your needs. Both of these are probably a little overkill for exactly what you need, but generally they both have the ability to properly handle your sources once they're in 1/4in form.

I'm kind of going on at length on this because I 100% did not consider it as a problem to be aware of when buying my mixer for my purposes and just lucked out that everything works.

For those adapters, a bluetooth receiver and appropriate cables for that particular unit, optical converter, and if "A/V audio" means RCA, just slap that RCA-1/4 from earlier in as well.

u/spicedpumpkins · 2 pointsr/HeadphoneAdvice

I currently own Senn 650, 6xx and 800s as well as Beyerdynamic DT 770/880/990 and T1 2nd gen.

For gaming I will swap between the 990 and 6xx depending if I'm upstairs or downstairs as they are the ones I have on the desk. Both rigs are using Yamaha MG10XU mixer and schiit Jotunheim amps

I personally prefer the comfort of the DT990 but the soundstage/positional audio for gaming is superior on the 6xx.

u/CACAOALOE · 2 pointsr/livesound

Could you dumb down the routing for me? This is the mixer

https://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Effects/dp/B00IBIVL42

Thanks

u/IDI0TSYNCRATIC · 2 pointsr/podcasting

I use the MG16XU, but the MG12XU is $329 and has great preamps and hard compression and EQ.

u/Megatf · 2 pointsr/Twitch

CUK Stratos Gaming PC (Intel i9-9900K with Liquid Cooling, 32GB RAM, 1TB NVMe SSD + 2TB, NVIDIA GeForce RTX 2080 Ti 11GB, 750W PSU, AC WiFi, Windows 10) Gamer Desktop Computer with 7 RGB Halo Fans https://www.amazon.com/dp/B07HRXRJZR/ref=cm_sw_r_cp_api_i_YHe5Cb2M3MEHY

Adamant Custom 16X-Core Workstation Desktop Computer PC AMD RYZEN Threadripper 1950X 3.4Ghz 32Gb DDR4 3TB HDD 250Gb SSD 750W PSU https://www.amazon.com/dp/B075KQ5DK6/ref=cm_sw_r_cp_api_i_LLe5Cb88QKHQG

Elgato Stream Deck - Live Content Creation Controller with 15 customizable LCD keys, adjustable stand, for Windows 10 and macOS 10.11 or later https://www.amazon.com/dp/B06XKNZT1P/ref=cm_sw_r_cp_api_i_GMe5CbF7SEQ7P

(I have a guide on my post history on how to wire, what cables you need and usb sound cards with amazon links)
Yamaha MG12XU 12-Input 4-Bus Mixer with Effects https://www.amazon.com/dp/B00IBIVLKQ/ref=cm_sw_r_cp_api_i_9Me5Cb83KZ5FZ

(Remake of the 3600 dollar neuman u-87 mic, what I use currently)
Warm Audio WA-87 Large-diaphragm Condenser Microphone https://www.amazon.com/dp/B01M6DIGGA/ref=cm_sw_r_cp_api_i_-Re5CbC388MGW

Elgato Game Capture HD60 S (Renewed) https://www.amazon.com/dp/B072MSJP82/ref=cm_sw_r_cp_api_i_BNe5Cb1C55PNG

Canon EOS Rebel SL2 DSLR Camera Body w/Advanced Photo & Travel Bundle - Includes: Altura Photo Backpack, SanDisk 64gb SD Card, Wrist Strap and Cleaning Kit https://www.amazon.com/dp/B0774VTNY7/ref=cm_sw_r_cp_api_i_7Qe5CbXRSDEYH

Canon EF-S 10-18mm f/4.5-5.6 IS STM Wide Angle Lens w/ Essential Photo Bundle - Includes: Altura Photo UV-CPL-ND4, Dedicated Lens Hood, Neoprene Lens Pouch, Camera Cleaning Set https://www.amazon.com/dp/B00VGWFKH4/ref=cm_sw_r_cp_api_i_ORe5Cb846HHQ0

AmazonBasics 50-Inch Lightweight Tripod with Bag https://www.amazon.com/dp/B00XI87KV8/ref=cm_sw_r_cp_api_i_RWe5CbZN4M736

AmazonBasics High-Speed Mini-HDMI to HDMI TV Adapter Cable - 6 Feet https://www.amazon.com/dp/B014I8UEGY/ref=cm_sw_r_cp_api_i_nXe5CbJPSB4C1

FIT-POWER ACK-E18 DR-E18 AC Power Adapter Charger DC Coupler Kit (Replace LP-E17 Battery) For Canon EOS Rebel T6i T6s T7i SL2 750D 760D 800D 77D 200D Kiss 8000D X8i DSLR Camera https://www.amazon.com/dp/B0746KXJ26/ref=cm_sw_r_cp_api_i_dYe5Cb8BPTNP8

Elgato Cam Link 4K — Broadcast Live, Record via DSLR, Camcorder, or Action cam, 1080p60 or 4K at 30 fps, Compact HDMI Capture Device, USB 3.0 https://www.amazon.com/dp/B07K3FN5MR/ref=cm_sw_r_cp_api_i_cWe5Cb4MVKQYN

Bi-Color LED Video Light Stand Lighting Kit 2 Pack 15.4'' Large Panel 3000K-5800K 45W 4800LM Dimmable 1-100% Brightness Soft Light for YouTube Game Video Shooting Live Stream Photography Lighting https://www.amazon.com/dp/B07KC7V9BW/ref=cm_sw_r_cp_api_i_WYe5CbE440185

You can buy most of the above items on Ebay for cheaper if youre patient to wait on the shipping. I did and significantly cut down on the costs (WA-87 for 460 instead of 599 for an open box never used, 260 for a slightly used Yamaha MG12XU, etc)

I use 3 monitors, two 60hz 24” 1080p monitors plugged into my streaming PC. Then I use a 240hz 24” 1080p monitor (I recommend Dell or Asus) on my gaming PC. I use ONE mouse and keyboard to control both my gaming pc and streaming pc through the use of freeware called, “Input Director”

What I’ve linked for you is essentially my studio level setup except with faster PC’s. The 32 thread threadripper will shred through 1080p60fps encoding at medium/slow, BUT... depending on your urge I would wait until Ryzen 3 comes out and we can build a comparable/faster PC for the same or cheaper price.

Sure you could cut the streaming PC, trick out your gaming rig with a fewer higher end options that provide minimal performance increases, then drain your in-game performance significantly streaming on the same PC.

Good luck, the streaming setup above will set you apart from most of your peers but what I linked above is just the hardware, the artistic side I chose for the backdrop of my stream ran another 250-300 bucks.

u/ProphetZopu · 2 pointsr/Twitch

Edit: Most of this post assumes you have a "line in" available on your computer. Most desktops have this already, not sure if laptops do if that is what you game on. Also, the Mackie Mix8 would be better if you plan to use voice chat because you can use the aux send for voice chat.

What mic you need really depends on what you're doing. Some great streamers get by with just a headset mic. Some people have $600 microphones and don't sound wonderful.

If I had $200 and was just starting streaming, I would start small, and do a lot of research. Get to know the basics like the difference between dynamic mics and condenser mics. Understand what phantom power is. Learn the difference between unidirectional, omnidirectional, and cardioid microphones.

If you want to get into pro audio, which it sounds like you do, I would recommend you should opt for a small mixer, maybe something like this:

https://www.amazon.com/Mackie-Mix-Mix5-5-Channel-Mixer/dp/B00ND1K8T6/ref=sr_1_4?s=musical-instruments&ie=UTF8&qid=1485752991&sr=1-4&keywords=Mackie+Compact+Mixer

I would recommend a mixer rather than an interface (such as a Scarlett Solo) because a mixer ultimately gives you more options. The Scarlett Solo is a beautiful device, I have one, but it's good for one voice optionally paired with one instrument, each on mono channels. That small Mackie mixer, which is about half the price, lets you have one voice paired with two stereo channels. Right now I'm sporting a 14-channel mixer I picked up used for $125, and it has more options than I need. Interfaces are supposed to have amazing analog-to-digital converters, meaning the sound they capture is more accurate, but I feed the "main out" from the mixer into a "line in" on my PC and I notice no appreciable difference. I am not an audiophile, though. To do that you'd need a cable like this:

https://www.amazon.com/TNP-Premium-3-5mm-Audio-Cable/dp/B01CNMSRA2/ref=sr_1_2?s=electronics&ie=UTF8&qid=1485755363&sr=1-2&keywords=6.25mm%2Bmono%2Bto%2B3.5mm%2Bstereo&th=1

Pair the mixer/interface, whichever you go with, with an XLR microphone. I'd recommend starting small. This dynamic mic sounds decent for a realllly low price:

https://www.amazon.com/Shure-SM48-LC-Dynamic-Microphone-Cardioid/dp/B0002D0HY4

It's what I currently use. It's kind of a dumbed down SM58. I started with a Sterling Audio ST55, because GiantWaffle uses that and I think his stream sounds great. It turns out my house is super noisy, so the ST55 which is a condenser mic picked up crazy amounts of noise. All the running computers in the room, the air conditioning, pets running around, people talking across the room, people stomping around upstairs, you get the idea. GiantWaffle didn't have that problem because he uses sound dampening materials in his studio, and keeps noisy stuff far away from his microphone. I tried out the SM48, and it works better for my environment, but if I had known better a couple years ago I probably would have bought this instead of the ST55:

https://www.amazon.com/AKG-PERCEPTION-Professional-Instrumental-Microphone/dp/B00167QUWI

A friend of mine has it, and it sounds amazing. It has similar sound qualities to other condenser mics, but it doesn't pick up nearly as much room noise.

I'm sure the AT2035 is great. It's a condenser mic, so it can pick up really quiet sounds, and it likely picks up a huge range of frequencies resulting in a super full-sounding voice. Just make sure if you go with this one that you streaming in a quiet room. Also, it needs phantom power, so make sure that the mixer/interface you're using can support it.

Be sure to buy an XLR cable. Some microphones don't come with one.

Pop filters are cool, but aren't strictly necessary, especially if you aren't singing.

Scissor arm mounts are nice if your desk can accommodate them. Remember you get what you pay for. A normal mic stand will work alright if you have enough room for it.

I should also mention the AT2020, Blue Yeti, and even the Blue Snowball sound great. If you simply want to plug, play, and forget with no options after that, they will suit your needs. Some headsets also have pretty good microphones on them, too. Like this one:

https://www.amazon.com/Sennheiser-PC-350-Special-2015/dp/B015ZKJIYI/ref=dp_ob_title_ce

Good luck!

u/KP_Neato_Dee · 2 pointsr/makinghiphop

The most straightforward way to do this, IMO, would be to use a "monitoring mixer". It'd be a simple hardware mixing board in-between all your audio sources and your speaker system.

So the turntable (after a preamp to take it to line-level) stereo outs go to the monitor board. The computer-out goes to the monitor board. The synth-out goes to the monitor board. You can leave them all connected, all the time, and just move the faders up and down for however loud you want to hear things.

Something like this with enough inputs to not worry would be ~$70-100 from Mackie or Monoprice. A little less from Behringer, but I'd avoid that brand in general if possible.
Here's an example of an 8-channel Mackie for $75:
https://www.amazon.com/dp/B00ND1KGEI/

I've used a basic setup idea like this (and another small mixer on input) ever since I got into making music, and it works really well. Very flexible.

u/WiretapStudios · 2 pointsr/podcasts

Mackie makes a good 8 channel mixer for $75 with phantom power. They are a long time maker of mixers and this one has a ton of input and output options as well. The Behringer Xenyx 802 is similar in functions and layout for about $60. I've used a lot of Behringer stuff with no issues in the past.

Also, f you haven't checked them out, MXR makes some great sounding condenser mics that are inexpensive. I bought one new, and found two more on Craigslist.

Edit: If you need the mixer to go into your computer, Behringer sells a DAC for $30 (or cheaper used) and the tape out from the mixer goes into that, and then the digital out from the DAC goes to the usb on the computer.

u/catroaring · 2 pointsr/WeAreTheMusicMakers

It doesn't have the ideal inputs. It's a DJ mixer, so the line ins are RCA. My synths are fine going into it. My workflow is based around this mixer, as I've got turntables hooked up too.


Could I get something like [this] (https://www.amazon.com/Yamaha-AG06-6-Channel-Mixer-Microphone/dp/B00TY8JE60/ref=sr_1_1?ie=UTF8&qid=1523157758&sr=8-1&keywords=Yamaha%2BAG%2BSeries&th=1) (just an example mixer) plug my bass into that and then from that mixer into the line in on the MP2015?

u/narcogen · 2 pointsr/letsplay

> ATR-2100

At that price range I can recommend this mixer.

Yamaha AG03

This would almost certainly get you a better DAC, and allow you to replace at least some of your VSTs, as it has a built-in EQ and compressor, although the settings for these are controlled from a Windows app-- there are more effects than there are room for physical controls on a compact mixer.

https://www.amazon.com/Yamaha-AG03-3-Channel-Mixer-Microphone/dp/B00TY8JE60?ref_=fsclp_pl_dp_6

u/reader17 · 2 pointsr/AskElectronics

Best thing I came up with in the past is using an audio mixer and a headphone amplifier.

http://www.amazon.com/gp/product/B00UIP0IPO
http://www.amazon.com/dp/product/B00X67G77O

u/HoneyMustard086 · 2 pointsr/livesound

No need to go used. The XR12 is $249 brand new:

https://www.amazon.com/Behringer-XR12-12-Input-Digital-Mixer/dp/B00ZR77GGC/ref=sr_1_1?ie=UTF8&qid=1486486698&sr=8-1&keywords=behringer+xr12

It is a great little mixer. I use mine for small gigs that normally don't need more than 4 mics but I have also used it for a band that needed 8 mics and the TRS line inputs are clean enough that I was able to plug in dynamic mics with XLR>TRS cables and get plenty of gain without noise. I am impressed.

The one thing to consider though is that you must have a tablet to control it. I bought an Amazon Fire HD 8 for $89. Works great.

EDIT: I just noticed the OP is in Canada. I guess he might have to go used or refurb.

u/phoningitindustries · 2 pointsr/volcas

I just got the maker hart loop mixer delivered last week. I was gonna get the Volca Mix but read a lot of complaints about it, so ended up on the Maker Hart.


The little I've tried so far is reasonable. Of course it's not going to be the best mixer ever at that price, but it's certainly portable and solid enough. Having 5 stereo inputs is great, too.


https://www.amazon.com/Maker-Hart-LOOP-MIXER-Portable/dp/B01M68UK38

u/StargatePioneer · 2 pointsr/podcasting

Earlier this year I consulted to do a very similar setup with the Curiosity.com podcast. The premise was for a host and a guest or two with a Skype-in possibility. The main host also works at a Chicago WGN radio personality and was open to a higher-end solution while not totally blowing out the budget. In the end we came up with an initial office studio layout in the $2k range. One thing he mitigated was room echo/reverb and office noise through using room placement and dynamic microphones.

Here is a picture of his original setup

Here is a picture of the acoustic treatment needed

Also, his equipment purchased was for 2 main hosts and a third guest (if necessary) and ran about $2,000. To get a 3rd or 4th microphone in place would be another $750ish a piece for the microphone, shock mount, pop filter, boom arm, Microphone digital processor and headphones.

Here is his list of equipment:

(1) Mackie ProFx8v2

(1) Zoom H6

(2) DBX 286s

(2) Electro Voice re320 package from BSW Warehouse

(2) Rode PSA-1 Boom Arms

(1) 6U Audio Rack

(2) Sony MDR-7506 Headphones

(1) Behringer HA400 Headphone Amp

Plus cables.

Each additional microphone would be a re320 package, a Rode PSA-1 Boom Arm, a DBX 286s and a Sony MDR-7506.

The Mixer can output a stereo track to a Laptop / PC which you can use to record a stereo track on your recording software of choice. The Zoom H6 offers the capability to record up to 6 channels either through the mixer using inserts / aux sends / subs.

Personally I'd swap out the Rode PSA-1 for the Heil PL-2T Boom Arm but either should get the job done.

Also, if I was advising him today I would tell him to forget the Mackie ProFX8v2 mixer AND the Zoom H6 AND the Behringer HA400 and buy a Zoom L12 Livetrack Recorder instead. In fact my Better Podcast cohost recently filmed a video review of the Zoom L12 if you want to check that out.

Finally, the re320 was the microphone he was used to from Chicago WGN radio but it would have been the one I recommended anyway. There are others to choose from but the re320 is the most forgiving for all voices.

For a more mobile setup I would recommend the Sennheiser MD-46 interview microphone which you could place on a desk stand with a On-Stage MY-325 Shock Mount. If you have the Zoom H-6 or Zoom L-12 you could easily take that setup from room to room. In fact I just used a similar setup earlier this year at GenCon as I think the sound turned out pretty good.

As for editing software there are plenty of opinions on that. But since this is business based you might consider getting some Adobe licenses. It will contain audio and video editing software as well as the PhotoShop suite as well. Personally I'm transitioning from Audacity to Movie Studio Platinum 14.0 and Reaper/Hindenburg Journalist.

All of this is professional gear but if you really want a no kidding pro setup I'd contact the guys at BSW Warehouse. They will give you options in the $10k and $100k ranges.

u/pmullins11 · 2 pointsr/volcas

I opted for the $59 5-channel Hart mixer instead.

u/tristoune · 2 pointsr/pcgamingtechsupport

a mixer like this would fit your need.

You'll need a RCA to jack for the headset (output) but it should work fine.

u/elricsfate · 2 pointsr/synthesizers

Absolutely gorgeous device and a perfect fit but abit out of my rang right now.

Probably going to go with a Loop Mixer

https://www.amazon.com/gp/product/B01M68UK38/ref=ox_sc_act_title_1?smid=A3QY80NORGXT27&psc=1

u/TANK9R · 2 pointsr/pcmasterrace

If you want to switch between the two you could use a small mixer. Use the headphone out for your headphones and the main mix for your speakers.

u/Playinithard · 2 pointsr/letsplay

If you want a good and priceworthy mixer I can recommend

http://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ

u/Jason-Genova · 2 pointsr/Twitch

Your best bet is to save up a little more and buy a stand alone mic that will last years.

This mic you can connect via a usb and xlr. Once you buy this and save more money up you can buy a cheap mixer/preamp to connect this to. It will make your mic sound a lot better.

https://www.amazon.com/Technica-AT2005USB-Handheld-Dynamic-Microphone/dp/B007JX8O0Y/ref=sr_1_3?keywords=Audio+Technica+AT2005USB+Handheld+Dynamic+Microphone&qid=1565335068&s=musical-instruments&sr=1-3

Scroll down and buy all 3 of the frequently bought together items for under 90 bucks. The arm, windscreen to put on the mic, and the mic.


When you're able to save up more money you should buy a preamp/mixer and use that xlr cable to plug into it. Here is a cheap one for down the road:

https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ?ref_=Oct_BSellerC_11974871_0&pf_rd_p=86c5a16b-d588-5ae0-b0bf-f9999489ccdd&pf_rd_s=merchandised-search-6&pf_rd_t=101&pf_rd_i=11974871&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=40F5EHBSEKR7GBG77VK3&pf_rd_r=40F5EHBSEKR7GBG77VK3&pf_rd_p=86c5a16b-d588-5ae0-b0bf-f9999489ccdd

u/ZagatoZee · 2 pointsr/rocksmith

> without the studio guitar track

In that case you don't want any audio from the game, since the studio guitar will always be in that mix.

You have 2 real options, line out from pc to an aux in on your amp (if it has an ipod input for eg) then headphones plugged into the amp. In practise this can frequently have weird noise issues however, becuase the PC is grounded and so is the amp - it may not always sound right.

The "correct" way to do it is with a 2 channel mixer. Feed amps headphone out into one channel and the games audio out into another (stereo) channel. You would then use the mixer to adjust the levels of what you want to hear from each source. A quick hunt on Amazon brings this up - its along the lines of what you'd want for this task.

u/aftli · 2 pointsr/DJs

Update: I got that mixer. That thing is really awesome. You can tell just by the packaging and the weight of it - it's made really well. Fully worth what I paid, I can't even believe it was that cheap. It feels like more solid construction than the S4. It wasn't a $5 or so Y-cable or adapter from Monoprice, but it wasn't what I'd call expensive. If you need something to "combine" two analog audio signals, this is absolutely the way to do it.

u/blackjakals · 2 pointsr/audio

That might work out better than what you have, but if you really want quality audio, you need to invest a little more into it. Getting a proper condensor mic like the Audio Technical AT2020 here would be a great place to start. You would then probably need an audio interface to connect it to like this or a mixer like this. Do your research and a lot of it. There are a lot of good options out there to improve your audio quality, but all options involve investing a descent amount of money as hard as that is to hear. Research, find what you really want no matter the price, and save, save, save until you have it.

u/wolfcry0 · 2 pointsr/audio

Yes, you can use a mixer to do that

This one is a good example, you'd need some misc adapters as well since it uses mono 1/4" plugs for the inputs and a stereo 1/4" plug for the headphone out.

u/the-crooked-compass · 2 pointsr/MechanicalKeyboards

For anyone interested on the rest of the items in this photo:

  • Logitech MX Master wireless mouse
  • Pecham keyboard and mouse pad (Amazon)
  • MIDI controller (can't remember the brand)
  • Xaomi Mi Box Android TV
  • Behringer XENYX502 5-channel mixer
  • Control module in modified case for Klipsch Pro Media 2.1 speaker system
  • Amazon Echo Dot (peeking from on top of Klipsch controller)
  • Behringer XENYX802 8-input 2-bus USB mixer
  • Craftsman screwdriver-handled bottle opener
  • Custom halligan bar bottle opener (from my fire company)
  • Guts of a 1.8" HDD (desk decoration)
u/5373n133n · 2 pointsr/drums

Sounds like you only want to play sound from both places into one pair of headphones. One way like someone else suggested is to use an audio recording software to do that. Another would be to get a cheap mixer and input the output of the computer and the drums into it and mix it into your headphones. Something like this should suffice BEHRINGER XENYX 502 https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_api_tJiZBb4ZEABBE
You might need a couple of these to go from 3.5 cables to stereo 1/4” for the board Hosa YMP-434 3.5 mm TRSF to Dual 1/4 inch TS Stereo Breakout Cable https://www.amazon.com/dp/B0010D0HO0/ref=cm_sw_r_cp_api_bXiZBb8B904E4

u/j0a3k · 2 pointsr/WeAreTheMusicMakers

Strongly urge you not to use a condenser mic live, particularly with cheap sound equipment. You're likely to get huge problems with feedback, and with your budget you could easily pick up a different mic and still come out ahead.

Secondly, condensers are fragile. You need to be babying the shit out of that thing when you move it around.

Here's my suggestion:

Get an SM58 in your life. With this you can go straight into your amp with the right conversion cable (bypassing the need for a more expensive mic interface).

If you can't run dual inputs to your amp, you can get a cheap mixer like so and run both through it into the amp.

u/mr_easy_e · 2 pointsr/BudgetAudiophile

What you're asking for requires a mixer that has two inputs (1 for phone, 1 for second device) and panning controls for at least 1 input. On that mixer, your phone will be stereo panned but your other device will we panned to the right so it's only coming out of the right input. You'd be able to adjust the levels relative to each other however you'd like. You'd also need cables/adapters to match the inputs of the mixer.

The devices that perform these functions, such as the one below, are typically not under $30 or portable. I think you're asking for something that doesn't exist.

https://smile.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ/ref=sr_1_1?ie=UTF8&qid=1500164735&sr=8-1&keywords=small+sound+mixer

u/Battlescar84 · 2 pointsr/NintendoSwitch

Honestly I don't know of any simple solution that doesn't involve a mixer, which are a little expensive. You can get one of these and then buy some of these. Then plug your switch into one input, your phone into another, and plug your headphones into the output. Then I'm not sure about the microphone, but at least you can hear both sources

u/LapisNLazuli · 2 pointsr/Twitch

XLR mics with phantom power for the win! If you're going for professional quality sound, save your money and invest in a good XLR mic.

​

The problem with USB mics like Blue Yeti is the fact that they use the integrated sound on your computer's motherboard. If your motherboard's sound system is older (2 years or older), the voice from the USB mic could sound robotic or it might not capture your entire voice range. This is especially a problem for folks with deeper voices. On older computers, you might sound far away or your voice could break up. If you have a brand new computer, feel free to use a USB mic until you can afford an XLR microphone.


XLR microphones require phantom power. Scarlet Focusrite (https://www.amazon.com/Focusrite-Scarlett-Audio-Interface-Tools/dp/B01E6T56CM) is a good product for phantom power, but there are affordable, good quality sound mixers that provide phantom power as well. Alot of streamers have used Berhinger Xenyx 302 ( https://www.amazon.com/Behringer-302USB-BEHRINGER-XENYX/dp/B005EHILV4) or Berhinger Xenyx 502 (https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ). I personally use Roland VT-3 (https://www.amazon.com/Roland-AIRA-VT-3-Voice-Transformer/dp/B00IGDXK9Q) because it's a voice changer, sound mixer, noise gate, and phantom power all mixed into one machine.

​

For mics, I admit I'm using a cheap Pyle PDMIC58 . (Hey, I got this XLR mic for free with my Best Buy points. I didn't have enough points for a good mic). My problem with the mic is that it's too bright for my voice, and I have a low voice for a woman. I need something that captures my full voice range alot better. I'm planning to upgrade to a RODE NT-1 mic (Not the Rode NT-1A) before the end of the year.

Like others have stated, take your time and do research. Don't rush! Find the mic that fits your voice best. Good luck!

u/_fuma_ · 2 pointsr/BudgetAudiophile

There are a few options.

The Mackie 2x2 big knob is a passive volume controller and switch only, there is no headphone amp, (and you're already monitoring your headphones from the Fiio), so keep that as is... then use a 3.5mm to dual 1/4" TS cable to go from the Fiio's line out (rear) to the Mackie inputs -

examples -

u/MIDItheKID · 2 pointsr/hardware

In order to do that, you'll probably need something like this

Assuming i'm understanding you correctly, you would use the 3.5mm out from the TV to go into one of the in ports of the mixer, and then have another PC out (aux if it's there) to another port of the mixer. Then the headphones go into the main out of the mixer (or the headphone port) and the Mic can go directly into the computer (assuming you don't need it for the PS3).

edit: made a diagram

u/dj_soo · 2 pointsr/Beatmatch

That’s a phono preamp and totally not the right type of gear to use and will likely damage your speakers if you run a line level signal through it.

It’s designed specifically to amplify a signal from a turntable and also applies a layer of eqing to the signal in order to make records sound proper.

Get something like this: https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ

u/LuminescentMoon · 2 pointsr/techsupport

https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ/

This will work. You'll need 3.5mm to 1/4" jack converters. Plug the PC and Mac into Line 2/3 and 4/5 of the mixer, and your headphones to phones.

https://www.amazon.com/UGREEN-Headsets-Separate-Headphone-Microphone/dp/B00Y458NA6/

And you'll need this for the mac's headphone/mic combo jack to split it.

u/dukeofpizza · 2 pointsr/pcmasterrace

I have this set and its absolutely great, crystal clear audio in games. Picked it up to try and get into podcasting. I've also upgraded to a pair of Sennheiser HD 598s and they are wonderful, sound great through the Focusrite interface.

If you just need a cheap budget mixer for a few mics and game input I would look at this.

u/itisrocketscience · 2 pointsr/vinyl

First, what are you planning to connect from your Focusrite Forte to your speakers?

Main issue with using separate inputs to the monitors is that you won't be able to control the volume independantly. I would suggest getting a mixer to put in between the speakers and everything else in the setup you are trying to achieve. Input form tt>preamp> mixer and computer>mixer to output directly to the speakers. This will also allow you to control the volume of everything independently. Especially since the volume control for the ROKITs is on the rear of the unit.


This is a general answer to your question. I have not looked into your budget and what you can get for it, I am assuming this budget includes TT? If so, off hand, I can suggest an atlp120 (~$250), use the built in preamp, and getting a small mixer (~$40 -$100) 5 channel 8 channel.

u/galylag · 2 pointsr/volcas

This was a surprise to me, too, when I got my first Volca after collecting a few Pocket Operators. They still play nicely together, but not in the same way. If you plan on getting more Volcas, a Volca Mix <https://www.korg.com/us/products/dj/volca_mix/\> may not be a bad idea (it can power three additional ones), though it is more expensive than other solutions.

Otherwise, there are a number of affordable mono mixers out there. I've seen people mention the Behringer Micromix before <https://www.amazon.com/Behringer-Micromix-MX400-Low-Noise-4-Channel/dp/B000KGYAYQ\>, but you'll need some adapters for 3.5mm to 6.35mm jacks. This will strictly be mono, however, so if you plan to add some stereo devices to the mix (pun intended), you'll hit a wall pretty quickly. Behringer has a range of other mixers, and you may want to check something out in the Xenyx range <https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ/ref=sr_1_9?crid=120WM7ZC873VD&keywords=behringer+xenyx&qid=1555091076&s=gateway&sprefix=behringer+z%2Caps%2C160&sr=8-9\>, where even the lowest-end one (linked) will give you plenty of room to expand.

Personally, I just bought a Roland GO: Mixer <https://www.amazon.com/Roland-GO-Mixer-Smartphones-GOMIXER/dp/B01MYC4DVP/ref=sr_1_1?keywords=roland+go+mixer&qid=1555091001&s=gateway&sr=8-1\> to use between a Volca, a few PO's, and a microphone for straight-to-phone video/audio recording purposes, and I've enjoyed it. If you don't plan on recording things and just need something to mix, this will be super overkill for you.

u/studiov34 · 2 pointsr/audioengineering

For a few more bucks get a real mixer like this: https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ. It takes stereo input from your drums and has pan controls.

u/everyonepoops000 · 2 pointsr/WeAreTheMusicMakers

As a professional Audio Engineer, I would go with the second choice. That being said, with audio gear you ALWAYS get what you pay for (if its cheap it will probably sound/feel like it). Also you could go for something that has Phantom Power already on it rather than buy another piece of gear, like THIS

u/smushkan · 2 pointsr/videography

The XF100 does output as dual mono, it's the Intensity Shuttle that's interpreting the audio as stereo - presumably you've got it plugged in by HDMI so it's assuming that channel 1 is L and channel 2 is R.

It sounds like you're using the camera for streaming - a better solution for audio than using the camera's XLRs would be to use a USB Audio Interface and a software mixer, giving you far more control over the audio without having to reach up and fiddle with the camera.

You could also use an inexpensive mixing desk, and plug the desk outputs into your camera's inputs.

u/podcastman · 2 pointsr/podcasts

The Behringer 802 is going for $65 at Amazon

http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C

That can do two mics on xlr and two more on 1/4" plug, all mixed and going to your computer via USB cable.

I was going to recommend the ATR2100 mic but I noticed they jumped from $35 to $60. I must have got mine on special.

Audacity is free and available for mac.

u/ollee · 2 pointsr/Twitch

I started with this guy which goes for around 60 bucks. Add in this mic though you can find much more budget mics, I got that used for 35 bucks at a Guitar Center. Some balanced XLR cables, probably 20 bucks of RCA cables and 8 dollars of RCA-f to TS-m plugs from ebay and one of these to eliminate the ground loop on my mixer since my house is old and has poor grounding, it gets rid of that hum. I spent around 150 bucks for rather boss audio. I have since upgraded to an audio interface and a bigger mixer, but the 802 was a wonderful buy.

u/BrysonOnDrums · 2 pointsr/drums

I use this Behringer headphone amp all the time. It has 1 xlr in/out and 1 1/4 in. And you can mix those to your headphone out.

As for the drum machine, I’d go out from that into the front of house board. Use a di box if needed. And then send that signal to the mix that you’re getting in your monitor from there.

I suppose if needed, you could run 2 of the behringer amps. Use the first for the drum machine (xlr) and your metronome(1/4). Send the xlr through to FOH and the headphone out into the 1/4 in on the second box. And use the second xlr in for your main monitor mix. And then headphone out from there to your ears. And that gives you control over all 3. But also at that point, I’d probably opt for an extra $10 and buy this 8 channel mixer

u/ChesswiththeDevil · 2 pointsr/Guitar

I have a pedal board (Muff, Klon Klone, Delay, Compressor) that runs into the effects loop of my Laney Cub 12R amp. I really can't crank this thing even 1/4 of the volume without my neighbor going crazy. I'd like to be able to:

A) Play this thing through headphones so that I can crank it up

B) Play along with a backing track that comes from my phone. Bluetooth would be a bonus if possible.

I was thinking that buying a small mixer like this could be a solution but I was wondering if there is any other similar gadget ($100usd or less) that would work. I know the sound won't be quite the same as I will use the external speaker out of the amp and into whatever I get. Any help?

u/mythicalpancakes · 2 pointsr/battlestations

Looks a lot like this mixer. Seems to be a popular choice for gamers. I’m assuming mic is plugged in to the preamp and has his yamaha monitors plugged into the outputs. Not sure if what other things he has routed through it.

Behringer Xenyx 802 Premium 8-Input 2-Bus Mixer with Xenyx Mic Preamps and British EQs https://www.amazon.com/dp/B000J5XS3C/ref=cm_sw_r_cp_api_Dgl1Bb88G4QEZ

u/zpefm · 2 pointsr/pcmasterrace

Yeah, that list contains a set of quality sound cards, but you should ask your friend more specifically what he needs recording-wise. If he needs to record something like 4 devices at once, he might just need a hardware mixer instead. Something like this.

u/karawapo · 2 pointsr/Gameboy

Your two questions have a common answer: a mixer will make your life easier.

Here's an unexpensive one with some room for growth.

u/Rex_Lee · 2 pointsr/Filmmakers

If you are doing three lavs, you need some way to mix them, so you can pan them where you want in the mix - position them in the audio mix, like you see them. Here is a mixer ($65) that will do what you need: http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=pd_cp_MI_0

u/MKeirsbi · 2 pointsr/vinyl

No, I don't think that's redundant. If you don't need one with a phono stage integrated, all you need is two separate stereo outputs in order to be able to control your gear to get maximum advantage. Now you're splitting up the stereo signal, which will definitely reflect badly on the playback of the music.

If you hook it all up to a mixer, you'll be able to send the signal wherever you'd want to, in stereo. I really think this might be an elegant solution to get the most out of your current setup. It doesn't have to cost that much. Looking to it in hurry, I'd say this Behringer could be up for the job. It seems to be having two lines out. You should decide on the best mixer according to your own gear and the inputs/outputs it has, but just to give you an example that it doesn't have to cost you an arm and a leg.

u/OldmanChompski · 2 pointsr/OP1users

I guess a mixer maybe.
http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_2?ie=UTF8&qid=1426823016&sr=8-2&keywords=behringer

But honestly you should really just use a DAW and a sound interface to record the guitar. It sounds like you're trying to use your OP-1 like its a DAW and thats simply not how it should be used for. Its a synthesizer and sampler. You'd be better off recording into a cheap standalone recorder then to use the OP-1 as a recording tools. Its better at taking samples.

But the mixer would at least allow you to plug both your mic and your guitar into the OP-1 and manage the levels of each. But be careful I've heard that ghost power can blow out the Op-1. I'm not sure if thats input or output that does it.

u/filbert13 · 1 pointr/podcasts

This mixer doesn't have USB. I convert it to 3.5mm audio by a RCA (only red/white) to 3.5mm audio cable which is then plugged into my computer.

This is the mixer I have is here

u/wesomon99 · 1 pointr/hometheater

Excellent thanks for the help. I found this which I am hoping will work.

https://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ/

u/Dr-Wankenstein · 1 pointr/Twitch

yeah, it definitely was worth it. with a little of adjusting everything sounds so much better and not like a tin can which is great too. I mean Idk what your budget is but you can basically find something for your needs.

https://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ/ref=sr_1_2?s=musical-instruments&ie=UTF8&qid=1483743837&sr=1-2&keywords=mixer

u/WhatAboutCrank · 1 pointr/mixer

OK your best bet is to Buy a separate microphone, a mixer and headphones.

Gaming anything is just marketing you will end up paying a premium for something that you really don't need.

For first timers I would recommend a cheap XLR microphone into a cheap mixer. DO NOT GO WITH USB MICS or USB AUDIO INTERFACE.

If you buy a USB device that uses a regular windows generic driver. windows will muddle your audio. This is commonly known by advanced users.

Instead plug in your mic using your mixer to your mic jack on the back of your motherboard.

Here are some affordable but great mic/mixer combo you can even maybe get them on eBay for Hella cheap.

Neewer NW-700 Professional Studio https://www.amazon.com/dp/B00XOXRTX6/ref=cm_sw_r_cp_apa_iDwIAb8DBK7RA

BEHRINGER XENYX 502 https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_apa_BFwIAbG6B1SAT

u/swirlydave · 1 pointr/audio

I'm williing to invest a little more when its something that will out live my pc, but yea you got me on teh right track for sure! may even get this https://www.amazon.co.uk/Behringer-502-Xenyx-mixer/dp/B000J5UEGQ with some adaptors, as long as it can do what i want

u/biglesworths · 1 pointr/audioengineering

Yeah, you could get an additional set, but make sure if you do that you get the uhf set so you can change channels on the second set. Also you would likely need an external mixer for any more than one set, which isn’t a bad idea anyway but I don’t know what your budget is. If you want to record through USB this one would be okay but you would need to do a bit of adapter gymnastics to get your full 5 channels:
BEHRINGER XENYX Q1202USB https://www.amazon.com/dp/B00CTKI45M/ref=cm_sw_r_cp_api_0912AbNZ76M19

Or if you don’t need USB this one is a bit better sized:
BEHRINGER XENYX 1002B https://www.amazon.com/dp/B0027B41P0/ref=cm_sw_r_cp_api_a912AbVWNHMKZ

Once again I’m assuming a budget of next to nothing so this is pretty much the minimum you’d want to get the job done. Another option would be to use the wired mic that you already have on one person, then wireless on everyone else into a two channel mixer such as this one:
BEHRINGER XENYX 502 https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_api_s812AbEF7EKSG
But the jankiness of that setup scares me a bit.

Oh and here’s a 2 channel mic setup as well.
GTD Audio U-35L UHF Wireless Microphone System with Headset Lavaliere Microphone https://www.amazon.com/dp/B013XVR85M/ref=cm_sw_r_cp_api_4l22AbVB766XE

u/asplodzor · 1 pointr/audio

We're going to need more information to be able to help you.

What are you trying to accomplish? It sounds like you might want a mixer with [at least] one mic input and be able to control the volume of two separate outputs from it. Is that correct?

If so, nearly any mixer will work. Here's one: https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ/ The Main Outs are two mono outputs controlled by one knob on the bottom right. The Phones output is a second stereo output controlled by the other knob on the bottom right. Since it sounds like you only want a single mic, the signal is already mono, so either output will work the same.

u/edlaurn · 1 pointr/bandmembers

So if I hook up this to the mic and speakers then that would work? Would it be crappy quality?

u/RetardedWhiteMan · 1 pointr/AskTechnology

This won't work and could cause damage.

However, a simple mixing desk, such as this will do the trick. You'll need the correct adapters porssibly, but effectively it will allow you to merge the two signals.

This is a simplified way of how I merge the audio from my PC, PlayStaion and guitar at once :)

u/KnotManKnots · 1 pointr/makinghiphop

What mic should I buy?

Budget = <300

I want a nice condenser mic at less than 300 (less than 200 is preferred)

And also, would an audio interface such as this one http://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1344058823&sr=1-3&keywords=mixing+board

work with any sort of condenser mic I choose? The description says it has phantom power , and I know you need that for a condenser mic, but can I connect it to my Mac? And is there any other accessories I need like cables and whatnot?

And final question, if I want audio quality like this https://www.youtube.com/watch?v=cOn1vY7_2b0

Just judging by your ear, would you say that was recorded on a thousand $ mic or what? can I achieve vocal quality like that with a condenser mic that costs less than 300?

u/severed-identity · 1 pointr/audiophile

> Is this going to be a computer set up or a hi-fi set up?

I'm trying to cover as many bases as possible with a single set of speakers (live synths / guitars, computer DAW, 1/8" for phones/ipads, movies, etc.). It seems like a cheap mixer is the most appropriate answer, but I'm unfamiliar with the jargon and don't know how to tell if there is a 3rd mono output channel usable for subwoofer.

Take this for example

Is it sane to use the headphone, or tape output for the subwoofer? Are they essentially all clones of the mix at line-level output?

u/warriorbob · 1 pointr/edmproduction

You might not strictly need one but it's useful to have because if those monitors are anything like my Rokit RP8s they take XLR or balanced 1/4" TRS, and your computer probably doesn't have those cables. You can use an audio interface (which usually has one of them) or you can just run it through a simple mixer, which also usually does. you can get these pretty cheap but as usual you have to pay for proper quality/durability.

The interface will generally sound quite a lot better than most computers' internal sound hardware (just because computers deal with a lot of RF interference and often cut corners) so it's a good idea to get eventually, but you don't 100% have to have one just to use monitors.

u/PhoneSteveGaveToTony · 1 pointr/Beatmatch

I use this Behringer mixer.

Also edited my post because I go 1/4” to XLR from my mixer to my speakers.

u/ItCameFromGOOR · 1 pointr/amazonecho
  • I just used "Alexa add cat food to my cart" and she said "sure, cat food is now in your cart" but when I pulled up the Amazon app it asked me to choose what kind to get. I'm not sure if this would change had I any cat food in my history but there doesn't appear to be any default brand that gets added.
  • I just used "Alexa make a phone call" and she asked for which contact name but also accepted a phone number.
  • To splice my computer audio with my Alexa into the same speakers, I bought this and it works great, just make sure to get the right cables
u/CaptSteelbeard · 1 pointr/PS4

Behringer XENYX502 5-Channel Mixer https://www.amazon.com/dp/B000J5UEGQ/

u/spearmint_wino · 1 pointr/edrums

Here's a (more expensive but pretty versatile) alternative - mini mixer - you'll want some cables to go with that (3.5mm to L+R jack from phone to mixer plus a stereo 6.35mm to jack from edrum brain to mixer) then plug your headphones into the mixer too. You could also pipe the output to your computer to record what you're doing so you can hear your progress.

u/MrEleventy · 1 pointr/headphones

I'm not sure how the mic would setup on this mixer. Haven't worked with this board, just the Behringer X32. But yeah, you can do :

PC(USB) -> Mixer

Xbox(RCA-Line) -> Mixer

and to toggle from one to the other, just tap the red switch.


E: Found this if you want to skip USB and deal with strictly analog. Might be more suitable for PC gaming since going PC to Mixer, you might lose positional cues since you'll be removing your sound card from the equation. Only important in FPSes.

u/Kris545545 · 1 pointr/audiophile

I have a Behringer Xenyx 502 and I just found out that the Jack port on channel 1 is dying. Would I be able to adapt the XLR into a female Jack connector? Or is the whole channel dead?

u/Wilde_Cat · 1 pointr/audio

I believe the mixing knobs you're refering to are actually RF Preamplifiers to improve S/N
(signal to noise) Ratio.

This is similar to what you will need in conjunction with a wireless mic system to control the "volume" levels being sent to your camera and eventually to your audio output.

u/UltChowsk · 1 pointr/audio

I have the same microphone and I use this:

https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ
And this:
https://www.amazon.com/Hosa-CMP-159-Stereo-Breakout-Cable/dp/B005HGM1D6/

That would be good if you have a line in input on your computer (the blue one)

If not, this would work if you don't mind loosing a USB port:
https://www.amazon.com/Behringer-Q502USB-Xenyx/dp/B00CTKI10A/

u/archbido · 1 pointr/audioengineering

Hello,

I’m ignorant in audio/gear stuff. I just love to make music use loop pedals.

Lately I’ve been running a sennheiser e835 dynamic microphone and my electric uke (swap cables when switching instruments) through a jamman solo pedal.

Problem is, the mic is terribly quiet compared to the uke.


If i get this mixer, will everything work?

Also, does running a mic->mixer->guitar effect pedal->looper->amp work well?

Thanks!

u/UMRebel1303 · 1 pointr/Beatmatch

Not when using Spotify playlists. Thinking of getting something like this: BEHRINGER XENYX 502 https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_apa_vADLAbTKN7QWR figure I could hook my RCA from controller to a line in, use the master out for monitors and run a 2nd line out from mixer to my PC line in. Would this work?

u/DFCFennarioGarcia · 1 pointr/Bass

A small mixer has always worked well for me, something like the small Behringer Xenyx. Cheap, simple, flexible, and you learn a little about live sound.

Behringer Xenyx 502 Premium 5-Input 2-Bus Mixer with XENYX Mic Preamp and British EQ https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_api_i_FTKDDbGF1PHHE

u/Firestar1161 · 1 pointr/audioengineering

Hi, I have a Pyle Pro PDMIC58, a Shure SM-58 Knockoff. It's really fulfilled the purpose I wanted it too when I bought it, a cheap and surprisingly clear form of voice.


I do YouTube videos with my friends using gameplay recordings, and I used to have a lot of static with my mic. It is worth noting that I record my videos using Shadowplay, which means that the audio cannot be ' cleaned up ' afterwards, as Gameplay audio is there as well, and it leaves the sound a bit mushy.


I connect my microphone to a small USB Soundcard, from my old Logitech G430. This cleaned up immense static, and that sample can be heard here.


I then decided that I was done with static, and am using Adobe Audition's Adaptive Noise Reduction feature to clean audio piped in, and output it through Line 1 using Virtual Audio Cable. The end result is extremely satisfying static free music... but with a couple of caveats. Here's a sample of the post-processed audio.


There are 2 caveats. 1) The post processing takes up a small amount of CPU, usually negligible, except for when I'm playing taxing games. 2) The audio coming out of Adobe Audition will occasionally be extremely distorted and buzzing. I believe this is due to the CPU being over taxed when playing the aforementioned games. ( Sorry for the lack of context and dumb Prequel Meme! ) Sample here.

Vocaroo doesn't have the absolute best quality sound, and I can assure you there's far more distinct crackling, like my words are being distorted but not at the same time. It's odd. Also of note, the audio glitch and distortion is only in recordings, which is the only thing that uses Line 1. Teamspeak, the program I use for my VOIP, is using my mic before post processing. So the distortion is obviously occurring in Adobe Audition somewhere.

The question I seek to ask, is I want to make my microphone have the quality of the Adobe Audition post-processing, without having to actually run the software. I'm not sure, but I think a pre-amp / USB audio interface would help me greatly here? Would this be an adequate product for my needs, or am I in the complete wrong area?


It's worth noting my Pyle Pro is an unbalanced mic, and that pre-amp provides 24/7 phantom power. There are other pre-amps where I can toggle that off, however. Please advise, thanks. My brother in law is also proficient with a soldering iron, and from what I've seen on YouTube, balancing this mic is extremely easy, moving one cable and removing the solder connection on pins 3 and 1.

u/Hotarama · 1 pointr/beatbox

Well then I can't answer about the amp, but here's the mic I bought: https://www.amazon.com/Shure-SM48-LC-Dynamic-Microphone-Cardioid/dp/B0002D0HY4
It's the Shure SM48 which is a budget model of the Shure SM58(the model used during pretty much all beatbox battles). It costs less than half what the SM58 costs with very minor differences in audio quality. If you really want bass to come through as well, I would also reccomend you get this mixer: https://www.amazon.com/gp/aw/d/B000J5UEGQ/ref=oh_aui_i_d_old_o0_img?ie=UTF8&psc=1
It's only $40 which is the cheapest you'll find a mixer of this quality. You can adjust the bass settings to your liking no matter what set up you're using, on an amp or recording on a computer.

u/innocentpinguino · 1 pointr/Twitch

To hear audio from two different devices you will need a mixer.

mixer from ebay

mixer from amazon

I compared different mixers from both websites and found the best one. I did your work for you 😉

u/TrickTwo · 1 pointr/buildapc

If I'm not mistaken, wouldn't a mixer like this be what you need along with a decent CPU capable computer? Not an audio expert though.

u/timhappens · 1 pointr/Twitch

Mixer is hardware. It allows you to plug multiple devices into one "source" that you can then listen to. I'll put a link to a good starter one below. H.264 is still the best way to encode which is all CPU driven so adding a GPU won't help you unless you are going to use NVENC or AMD encoding via a GPU.

Another question, are you a partnered streamer? If not, you won't always have transcode available so streaming at 6000kbps will limit the amount of people who can watch you. Streaming at less than 6000kbps on a 1080p60 stream will make it look pixelated. This also matters on the type of game. If you're playing an RTS like civilization where there isn't a lot of movement on screen you can get away with a lower bitrate at 1080p but if you're playing games with a lot of fast movement you're better off streaming at 720p60 at 3000kbps because then even mobile users can watch you if they are in a decent signal area.





https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ/ref=mp_s_a_1_5?ie=UTF8&qid=1550249364&sr=8-5&pi=AC_SX236_SY340_FMwebp_QL65&keywords=behringer+mixer&dpPl=1&dpID=51GyTA4WTHL&ref=plSrch

u/Critical671 · 1 pointr/audio

I'm not sure about listening to both through the TV itself, but you can output your TV's audio as well as your phone's audio through an audio mixer or an A/V receiver and into a speaker system. A mixer like this or a reciever/amplifier like this would work just fine.

There are benefits for using both. A/V receivers are optimized for home theatre systems (processing both audio and video signals from separate devices, hence "A/V") and can output audio to a surround sound system, whereas mixers are usually used to process audio only (used in music studios/concert venues/home recording.)

For the simple purpose of playing two audio sources at the same time I'd go with a cheap mixer, but if you are looking to upgrade your home theatre system in the future, then maybe consider investing in a receiver. You'll need a set of speakers for either one, and probably adapter cables if using a mixer.

u/bits_and_notes · 1 pointr/guitarpedals

2 Radars into a mini mixer?

u/nolageek · 1 pointr/Twitch

I'm using a Behringer Xenyx 502 - it only has one mic input so you may want to look into the Xenyx 802 (2 mics) or the 1202 (4 mics) if you need more.

u/ramma314 · 1 pointr/Twitch

Could use more info on your current setup equipment wise. I think the easiest way to do what you want is to get a cheap mixer like this one. You just split the output and route it to both computers.

It might also be possible in software with something like synergy. http://synergy-project.org/

u/Maijing · 1 pointr/PS4

Yeah, sounds like you've tried everything. That's odd. It might be a problem with your PS4 but I don't know. You could check your PS4 video output settings. Maybe playing with those settings will fix the issue. Sorry I couldn't be more help.

I will say that I'm happy I upgraded to the Pro. It's not a huge improvement but games do look a little better and have a higher/smoother framerate. Plus, it has an optical audio output, so if you still have trouble with audio extractors, you can use a digital to analog audio converter to get audio from your PS4 to headphones or speakers. You can also add a mixer and get volume control. That's what I use now and it's great.

Digital to analog converter

5 channel mixer

u/Thatpewguy · 1 pointr/hardwareswap

It's not sadly. Got rid of it not too long ago actually. :( I would suggest this though if it's just for a microphone, it's pretty cheap and works well from what I've heard/read.

u/Skullriot · 1 pointr/audio

https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ

This can mix two separate stereo inputs into one output. you just need TRS to TR adapters

u/LambsAnger · 1 pointr/synthesizers

Would this let me hear all 3 at once?

Also why is an 8 channel mixer only limited to 4 instruments?

u/crapinet · 1 pointr/audio

Very cool. I wasn't 100% sure those existed until I looked. Something like this will only work with powered studio monitors (not passive ones, those would require a separate amp).

This is a much nicer suggestion than that other one I looked up - both of these were just quick Google searches, not well researched on my part. https://www.amazon.com/Rolls-MX42-Stereo-Mini-Mixer/dp/B00102ZN40/ref=mp_s_a_1_2?ie=UTF8&qid=1539275837&sr=8-2&pi=AC_SX236_SY340_FMwebp_QL65&keywords=stereo+mixer&dpPl=1&dpID=517QoJlNM0L&ref=plSrch

And the cheapest mixer you could go with

https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ/ref=mp_s_a_1_6?ie=UTF8&qid=1539276002&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=mixer+audio&dpPl=1&dpID=51GyTA4WTHL&ref=plSrch

Although, honestly, I'm not sure I'd get a behringer for something that I would trust to be on all the time. Their build quality isn't great (they're the cheapest for a reason). If it were me, I would get that $50 rolls above. It's simple, unpowered, and will probably be reliable for decades and the extra inputs and volume attenuation would make it far more usable. Just my 2 cents!

u/Gamefan211 · 1 pointr/audioengineering

Sorry if this isn't the right sub for this

Reposting due to formatting issue in previous post.

So I'm currently trying to figure out how to split audio from all of my consoles.

The best setup I can think of at the moment is splitting the audio off of the second output from my HDMI splitter I use for my PS3. I could try to move the HDMI splitter after my capture card, so then I'd still hear all audio from the currently active console.
The above visualized: Current into new

My main issue is finding a cheap stereo mixer that takes single, stereo, 1/4" plugs to the Mini-mixer, as the one I recently got is exactly what I need, except that it's mono only. I've been able to find a few passive mini-mixers, this one being the most likely. The reason I can't go with that, is because it's likely the game's audio will be too quiet for me and I'd to boost it, which requires an active mixer.

Every single other alternative has been the Behringer Xenyx 502, which may work, but I'd need to buy 3.5mm/RCA to L/R 1/4" adapters, which would be an extra $20-$30 plus I want a bit more scalability for future audio inputs.

Lastly, for a bit more info, I use the VST plugins within OBS Studio, so I sadly cant just plug these into my current mixer, a Yamaha MG10XU, or else it'll come out of where my mic is, as well as likely being too loud for viewers when I boost the volume for myself.
The only alternative would be to upgrade to a Yamaha MG12XU for the extra Aux bus's, which would be an extra $130 for only the extra aux bus's I'd be using, since there's nothing else that i feel warrants the extra cost.

So in summary, has anyone found a better way to get console audio to headphones while keeping it separate from the stream audio?

u/NagyAudio · 1 pointr/microphones

This is the correct answer.


Since you already have phantom power supply you'd be able to use a Xenyx 502. You could also use this interface with or without the phantom power supply. With either of these I'd recommend using the RCA out to Line in on the PC, with a cable like this.

u/rashdanml · 1 pointr/Twitch

The one you're looking at already comes with an XLR cable, so you're good there. I made the mistake of buying a separate cable, when both the boom arm I bought, and the audio interface, both came with their own cables. Long story short, I have 2 spare XLR cables.

The 2 things you'll need to make the above work:

u/5supermarioAkaChara · 1 pointr/microphones

i have a phantom power microphone and dt990s running through a fiio e10k, can i run both of those through this without losing any quality?

u/vinyl_SS · 1 pointr/SubredditSimulator

Echoes is far and away better than some of my more left field albums in the USA. Will this Behringer mixer board allow me to sell either of them on vinyl is fact that the picture only partially covered the vinyl.

u/w0lm · 1 pointr/WeAreTheMusicMakers

https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ + https://www.amazon.com/Cable-Matters-5-Pack-Plated-Adapter/dp/B00PIWB2SO/ref=zg_bs_3224439011_20?_encoding=UTF8&psc=1&refRID=Y3ZGNZSK0VV2T8PN6XBS use cables from the headphones out and then use the small adapters (depending on where you live they are easily available from shops like maplins(in the uk, if you are in the uk)) and then plug them into the mixer and plug the headphones into the mixer, audio levels can be changed for both instruments, and the mix etc

u/sepsiss · 1 pointr/WeAreTheMusicMakers

https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ/

Get one of these and then the right adapters. Those are very cheap to get, probably could get some at guitar center.

u/Funkbass · 1 pointr/livesound

We sing pretty straightforward post-punk. So, think - pretty melodic (if not "soft") verses but with dynamics that sometimes can get... loud.

I plan to use this everywhere from practice (small room) to house shows to the occasional larger club/theater performance (Not common and usually we just use the venue's equipment in that scenario.)

I have a giant recording console that I'd rather not move around, and then I have this as a portable mixer.

u/TheJunkyard · 1 pointr/audioengineering

I don't think that would work, as it doesn't have a headphone output. Pretty much any small cheap mixer with a headphone out would work though. The Behringer Xenyx 502 is the cheapest I could find with a quick search, but there may be even cheaper options out there.

u/pvtgoongames · 1 pointr/Twitch

A mixer at your mic split to both PC will work. With that mic you might want a good mixer anyway. https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ Most small mixers will have 2 outputs. You can also use virtual solutions like Vban, Virtual Audio Cable, and Voice Meeter banana to pickup the mic and bring over to the stream PC. https://www.vb-audio.com/Voicemeeter/ These come in handy because there's often other stuff (discord, games, music, etc) that you might want to pickup from your game machine and mix differently before they end up in OBS.

u/jessaay · 1 pointr/audio

Would something like this be able to mix them together? https://www.amazon.com/Behringer-502-Premium-5-Input-British/dp/B000J5UEGQ

u/Insxnity · 1 pointr/audio

This combo has been very nice for me. Input for my PS4, Alexa, PC (through usb), and phone audio.

Here’s a diagram I made on my phone. Running audio for an event at the moment.
https://i.imgur.com/Z6zhI4P.jpg

Plug the usb card into your PC. plug the items into the mixer. Plug the Audio output from the mixer into the IN channel on the usb audio card. Flip on the “Monitor audio” switch. Plug your headphones into the convenient jack on the USB audio card.


ALTERNATIVE:

only buy the usb audio card. You don’t need a mixer. Get a 3.5mm stereo to RCA stereo (headphone jack to red white cable). Plug this into the in slots on the usb audio card. Plug the card into PC. Plug headphones into jack on the card. It has a volume knob on headphones that will let you control it.

I would heavily recommend the usb audio card I linked. If you want more versatility, grab a mixer too. Message me if you do grab anything and need help setting it up.



BEHRINGER XENYX 502 https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_api_YzONBbJV9RHD7

BEHRINGER U-Control Uca202 Ultra Low-Latency 2 In/2 Out Usb/Audio Interface With Digital Output https://www.amazon.com/dp/B000KW2YEI/ref=cm_sw_r_cp_api_TAONBb1FJ01ZQ

u/gbrldz · 1 pointr/audiophile

I don't think it would make that much of a difference (if any) if you were to use either the PS4 or TV SPDIF.


 


I have my PS4, XBOX, TV, etc. going to my powered monitors via a mixer.



This is connected to my TV. - SPDIF DAC

Which goes to this. But you don't really need it unless you have multiple sources you want to easily switch to. - RCA Switch


Switch is connected to this. - USB Mixer


Or you can get the smaller version.

Or one cheaper without the USB.






u/LolMeister117 · 1 pointr/LinusTechTips

Buy
a sound card, any kind will do.
2 sets of 3.5mm to 1/4" splitters
a 3.5mm to 1/4" adapter (Don't need if your headset already has one)
a mixer like this

Hook up your 2 sound cards and headphones to the ports at the top of the mixer. Set only Teamspeak to use this sound card as playback device. Everything will still use the system default. Touch the knobs to adjust volumes.

u/rehpotsirhc123 · 1 pointr/pcmasterrace

You could run a little mixer to adjust the audio: https://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ

With that you can probably max out the volume on the control module for the speakers and hide it, using the mixer to adjust the sound instead. With this setup you'd still be using the monitor create analog audio from your TV box, if not you'd need a cheap DAC that would take the coax digital and turn it into RCA output.

u/TXBlazez · 1 pointr/buildapc

I'll just preface by saying that the fullest extent of my knowledge is amateur voice over/acting and having ran a small YouTube channel however with that being said there are a few recommendations i can give.

Headphones: https://www.amazon.com/dp/B017H00ZJG/ref=psdc_12097479011_t2_B0179H8SDC


I was unable to find an exact match to the 7dayshop Aero Freedom which is what i wound up using after my Bose Quietcomfort 25's wound up broken due to an internal wire becoming loose, regardless i found that with getting these headphones i was more making a trade off rather than a downgrade, they're louder than the bose, "base-ier" than them and have only a slightly softer high end and about the same in terms of the mid frequency. Overall if the Quietcomfort 25 is 100% then you're getting 85% of that experience for much less (And the noise cancelling is a must if you like me are extremely sensitive to noise).



Audio Interface: https://www.amazon.com/gp/product/B000J5UEGQ/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=ATVPDKIKX0DER


Now as to why you should be looking into getting an audio interface? well this mostly has to due with the microphone pick but generally you will be getting a quality pre-amp, decent EQ and later on you can use the 2nd track to process the audio to your headphones (great for listening to music) all of this results in much lower background noise (increase volume with the preamp then reduce it on the main out/windows) and the ability to make decent adjustments to the high and low frequencies of your microphone.


Microphone: https://www.amazon.com/Pyle-Pro-PDMIC58-Professional-Handheld-Microphone/dp/B003GEBGA0/ref=sr_1_1?s=wireless&ie=UTF8&qid=1491787539&sr=8-1&keywords=Pyle+PDMIC58


So the reason I would pick the PDMIC is tri-fold, 1st even with very cheap dynamic microphones the design is so similar (and i suppose easy to manufacture?) that the quality difference between a $20 dynamic microphone and a $100 microphone is minimal at best and once your signal has been through the audio interface it should be nearly indistinguishable to a pricier model (https://youtu.be/_Vqz44dijw0?t=213)

All that's left is a TRS to 3.5mm cable which you can get for about $7 this is just to connect the interface's main out connector to your PC.

Good luck!

u/Sandwich247 · 1 pointr/buildapcsalesuk

The mic: MXL 770 - Used ~£65 from eBay, I got mine for £70 on Amazon, they look to be going for £92 right now

Mixer - Behringer Xenyx 502 mixer - ~£33 Amazon link

I guess I got lucky, but it's leagues ahead of the Yeti.

u/Prosth · 1 pointr/discordapp

> plug my headphones into my PS4 and listen to the game sound, while I also use my headset for my PC

It is possible to use two headsets. It will not be comfortable or convenient.

Best option would probably just be to grab something like this. Plug your PC and PS4 into the mixer, balance audio levels, and output to a single headset. You'd have to get an extender to send your mic to your PC, though, if it's a combined headset.

Alternatively... speakers for PS4, headset for PC, set Discord to PTT?

u/lolgubstep · 1 pointr/audiophile

Hello, I am looking to buy a mixer to reduce background noise, equalize my voice, and add a bit of treble and bass to it. Normally I do all of this in audacity, but sometimes it's just not enough if something isn't quite right with the source.

I have a phantom powered microphone that outputs through a 3.5mm auxiliary.

I'm still pretty new to audio and broadcasting, so I was wondering if there was a mixer I could get ~$60 or less that would help make my audio quality sound better. I'm just looking at this right now, as it's cheap on amazon https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ/

Thoughts? Suggestions? Tips?

u/pyroiiv · 1 pointr/NintendoSwitch

Here's the mixer I use for my PC and Switch:

BEHRINGER XENYX 502 https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_apa_fEwUAbD6SZ2FS

Get two 3.5mm TRS to dual 1/4" TS cable and a dual 1/4" TS to female 3.5mm TRS adapter for your headphones. I use the Hosa cables because they're cheap.
I've been using the mixer for over a year with no issues (used it for my Xbox One before I got my Switch).

I also have a cheap USB audio adapter for the Switch because the headphone jack buzzes when my Switch is in the dock.

u/achtagon · 1 pointr/BudgetAudiophile

Recording on a budget with an XLR mic needs at minimum a mic preamp circuit and some level adjustment. See this option. To get everything into a computer with one piece step up to this for a few dollars more

Edit: this option is even cheaper.

The Scarlett Audio interface is a better option but twice the money.

u/harris_kid · 1 pointr/pcmasterrace

Well theres the Yeti

The Seiren

Audio-Technica AT2020USB

Or you can get an analogue mic with an XLR output and get a 3.5mm Stereo Jack Plug to 2 x 6.35mm Mono Audio Cable Going form your PC to a Behringer Xenyx 502 mixer

Obviously these are all up to you, I'm just suggesting stuff here.

u/Mainova · 1 pointr/hometheater

You would need a basic 2-channel mixer that will bring any sources you want through RCA and output to the powered speakers.

You would have to go from the mixers 1/4" TRS cable to the input on the Yamaha powered subwoofer, and then use the XLR outputs on the powered subwoofer into both your studios inputs and use the mixer for all your volume control.

u/epes · 1 pointr/Twitch

You use an audio mixer to "mix" two or more audio sources into one. (ex: PC audio + Xbox audio > headphones)

This can be done with software (http://vb-audio.pagesperso-orange.fr/Voicemeeter/banana.htm) or hardware (http://smile.amazon.com/dp/B000J5UEGQ/)

u/BuIbousaur · 1 pointr/audiophile

Guy who knows almost nothing about audio stuff here asking what is probably a very basic question. I am looking to combine two audio sources (from a PC and a Wii U) so I can listen to them both at the same time, through the same set of headphones, for personal usage. Would something like this be able to do that without many issues? If not, is there anything around the same price which will?

u/apexian · 1 pointr/audiophile

Yeah, not really the right sub, but what you probably need is a mixer, something like this for example: http://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ/

u/Brillegeit · 1 pointr/BudgetAudiophile

As others have said, your budget options is an analog mixer or doing it in software on a computer. The software part is probably the best if you're only using one sound source in addition to the mic. Just plug the headset in the USB sound card, the USB mic to the computer and dick around in the sound mixer. For Windows 7 it's right click the tray icon, "recording devices", click "properties" on the mic, "listen", check the box for "listen to this devices", select the desired output channel and click "OK". I got ~200ms latency on my system, but others might help you get this lower. I've just used Windows for games the last decade, so this is as far as I can help you.

I personally route/combine the sound from two computers using a Behringer 502 mixer, but I'm sure there are newer alternatives, and there is a 502 USB which is probably better for routing the end result to a computer. The disadvantage of analog is that quality cost money, and you might end up degrading the signal with enough steps. I also had to "airgap" the computers from the mixer using optical cables and cheap DACs to avoid a ground hum, but I'm sure there are better ways of dealing with this. I'm using a Windows/Linux pair of computers and a USB mic connected to a USB switch connected to both (and regularly switch the mic between the two systems), which is partly why I'm doing it this way. In a pure Linux environment I'd rather just fix everything with a few low latency Pulseaudio JACK sinks and route all sources from one computer over the network to the other and mix in software there, but my analog solution "just works" and has snazzy physical knobs for individual channels and monitor volume.

http://www.dx.com/p/digital-optical-coaxial-toslink-signal-to-analog-audio-converter-adapter-black-391637
https://www.amazon.com/Behringer-502-BEHRINGER-XENYX/dp/B000J5UEGQ

u/ExperienceLost · 1 pointr/letsplay

Behringer makes multiple versions of that kind of soundboard. If you're not recording multiple people or using multiple microphones, it's not worth it. The sound quality doesn't go up, just the amount of options. If you're only recording with that 1 mic, then get this: https://www.amazon.com/dp/B000J5UEGQ/ref=psdc_11974871_t3_B000J5Y214

Also, This might not apply to you but, I bought a usb mic and used an XLR-to-USB chord to plug into my soundboard. My audio kept clipping (becoming so loud that it cracks) and I had to buy this as a go-between for the adapter chord and the board. It lowers the mic's natural volume: https://www.amazon.com/gp/product/B000ZLX2TU/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
You probably wont need it but if you have the same problem then pick it up after you get your other stuff.

u/Rhetoriker · 1 pointr/audio

Hey there :) thank you so much for your reply

The reason for which I wanted to go for for an amped signal into onboard sound card was that I wanted to eventually get a good PCI-E sound card for virtual surround sound for gaming. I was looking at mixers like this.

I'm now going to start to look for a USB sound card that facilitates good ingame sound -> virtual surround sound capabilities. In case you have recommendations (I need to make full use of the potential of the Teufel Real Z, I want good audio quality, and at the same time I want to be able to have it calculate virtual surround from gaming audio output), please tell me what you would get!

u/RaptorMan333 · 1 pointr/headphones

I'm sure this would be fine Behringer Xenyx 502 Premium 5-Input 2-Bus Mixer with XENYX Mic Preamp and British EQ https://www.amazon.com/dp/B000J5UEGQ/ref=cm_sw_r_cp_apa_i_5O4QCbGM00QMJ

Plus if you're into audio you can probably find other uses for it

u/Starving_Poet · 1 pointr/hitbox

Yeah, just had to get home to get the model number:
http://www.amazon.com/Behringer-502-XENYX502-5-Channel-Mixer/dp/B000J5UEGQ

I use Shure SM-58 Mics simply because they are pretty much bomb-proof and do a great job of canceling out background noise.
I've never been a fan of USB mics.

But I have both my mics and my computer audio coming into this so that I can level out everything and then run it back into recording PC as a single stream.

Being able to hear yourself while you stream without the software delay of using a separate mic line is, what I consider, a must-have.

u/darkworldaudio · 1 pointr/audio

How about just a smaller Behringer Xenyx, maybe the 502?.

It does utilise phantom power, but you can't switch it on or off, so if you plug your condenser mic into the XLR port phantom power will be provided, to use a mic without phantom power you have to use the line port (just below XLR), so you may need a different cable (XLR - Line) for a different mic. Bit annoying but it's small, cheap and does what you need. Hope that helps.

u/exit143 · 1 pointr/livesound

Perfect... You could even get a crappy 2 channel mixer with headphone monitoring... I am NEVER one to recommend Behringer, but if budget is an issue, even this would work. You plug in the XLR from the sound board into the XLR port, and plug in your headphones... $50. Don't expect amazing audio quality or for it to last 20 years.

u/outerspacegrass · 1 pointr/Guitar

Thanks for your answer. Will something like this work?

So if I run my headphones through a soundboard it, it will not cause any damage to any equipment?



u/[deleted] · 1 pointr/Games

This $45 model does have headphone amplification built-in, but it's quite a bit bulkier. With this amp you would have to use the speaker-out from your computer and make sure that volume is set correctly along with the mixer's output volume.

With the previous mixer + a headphone amp, you would hook it up to your computer's line-out (fixed volume), set the volume on the mixer to a medium level then adjust the volume only at the amp. So that option might be a little more hassle-free. They would take up less space but the cable between the mixer and amp may introduce some unwanted clutter.

u/NaughtyGaymer · 1 pointr/headphones

I personally use this.

I have my PC on one input, and my TV on another input (so I can watch a movie or something on my PC and play console games with one pair of headphones)

With the mixer I linked, you can have three inputs and two outputs, which is perfect for your setup.

You'll need three of these to connect to inputs 2/3 and 4/5 as well as the main out output. Then you also need two of these to go to the first input, and the other output.

I highly recommend that mixer, it works fantastically and is built tremendously.

All told it will run you about ~$50

If you have any questions let me know!

u/NoName320 · 1 pointr/pcmasterrace

Yeah, for a loopback without delay, you'd need an external sound mixer with a stereo input (for the PC sound) and a mono input (for the mic), as well as a monitor out (for your headphones), and a line out or a Y splitter to get the mic into the PC.

You could do that with a 40$ behrigner board or else, really doesn't need to go with an expensive option

u/morex87 · 1 pointr/headphones

Use an Audio Mixer like the "Behringer Xenyx 50" via https://www.amazon.com/gp/aw/d/B000J5UEGQ

u/quantumized · 1 pointr/Guitar

I was looking at this BEHRINGER XENYX 502

Would this sound okay? I don't mind spending more if there's a noticeable sound quality increase? What about tube pre-amps? Worth it?

u/dblbogey · 1 pointr/rocksmith

Cool thanks.
So something like this would be a good choice.

Amazon!

u/QuantumTweaker · 1 pointr/Twitch

> topics could include - different types of mics - mixers demystified - how to use EQ to improve the sound of your voice - what is compression and why you need it ...etc.

I could totally go for this. I'm getting a mixer and would love to know how to utilize it fully as I have a basic knowledge of what to do.

Mixer: Behringer XENYX502 5-Channel Mixer

u/TacticalBacon00 · 1 pointr/techsupport

I don't believe that there is a way to have a zero delay software solution. Since it has to pass through your computer, it needs to be processed in some way before it can be played back. Perhaps an external mixer like the one that i'm currently using would work well for you, if you need a mic monitor with no delay. I'm using a XENYX X1622USB in the pic, but for your needs, a simple XENYX 502 could suit your needs perfectly.

EDIT: the Zalman mic that you mentioned requires a boost if you want to plug that into a mixer. Something like this and a 3.5mm to 1/4" audio adapter would be required.

u/cctk · 1 pointr/Bass

This is the one I have. It works fine for that purpose.

u/2old2care · 1 pointr/audio

Yes, a passive mixer isn't designed to drive headphones. Also, the amplifier you linked to won't do the job. You need some kind of active mixer.

Something like this would probably do the job for you.

u/Deranged40 · 1 pointr/pcmasterrace

Sounds like you need a mixer.

Behringer and Mackie both make great products. Remember that most of your devices are probably stereo, which is two inputs each.

So you need to mix 6 inputs to two outputs (right and left).

Behringer 1002 is a good example of this.

Channels 1 and 2 work as two independent mono channels. So it would be more convenient for you to plug your 3 devices into inputs 3/4, 5/6, and 7/8. This would give you a single volume knob per device.

From there, just plug your headphones into the "Phones" output. You might need to get a 1/4" to 1/8" adapter. They're real cheap.

u/WillBolton45 · 1 pointr/Twitch

Perfect! Ive just done some research and I wont need a USB version will I, so i will go with the cheaper one.(https://www.amazon.co.uk/dp/B000J5XS3C/ref=dp_cerb_1)

Yes I would like to use it for my game chat, I have thought about this and think it would just be best to use a webcam mic or something similar. Please tell me any alternatives.

Thank you so much for the response.

u/jellycola · 1 pointr/synthesizers

Stupid question.. but if if I'm using this mixer: https://www.amazon.ca/Premium-8-Input-2-Bus-Preamps-British/dp/B000J5XS3C

Does it matter how many tracks the recording device has if my mixer only has one stereo out? Is there a way to connect my instruments into both the mixer and the instruments, or have something like the DR-40 record the separate mixer channels as separate tracks?

u/TechnicolorSushiCat · 1 pointr/synthesizers

Unless I am misunderstanding that your needs are a microphone, a PC input, potentially a second PC input, with the ability to act as a 2-channel USB interface, this should get the job done.

One reason I'm suggesting Yamaha is ASIO audio driver support. This isn't uncommon, it's just that Yamaha owns Steinberg, so seems likely to work decently.

BTW - you can get cheaper mixers, the trick is the USB interface with the PC. IF you didn't need that, this Behringer gets the job done

https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C

u/LauriCular · 1 pointr/headphones

I've been using a mixer in this way for years; it's nice to have a Youtube on whilst playing a game too - why not? Something like [this] (https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_3?s=musical-instruments) would allow you to mix 3 stereo sources.

u/dankney · 1 pointr/Logic_Studio

You may want to consider something like this:

http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/

It's inexpensive and would allow him to record both Microphones and Keyboards into the computer (stereo in).

u/P00Pmaker · 1 pointr/WeAreTheMusicMakers

i can definitely afford something better, i just wanted something on the cheap end so i could practice at home. do you have any recommendations? i was thinking something maybe like this

http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_3?s=musical-instruments&ie=UTF8&qid=1398712839&sr=1-3&keywords=small+mixer

u/Pindaroo · 1 pointr/podcasts

I would suggest this mixer as a cheaper alternative. When we first started my podcast we got these mics which although slightly different work well enough (we still use both, added in another MXL990 and a Shure SM57A Beta which although more a live sound mic works okay). The MXL990 is nice though a little more expensive individually. Add in stands and cables and you have a package right around your limit. I would also suggest pop filters. The extra $10-15 for them pays off in the end.

Hope that helps.

u/camostorm · 1 pointr/podcasts

The MicPortPro from CEntrance is pretty good idea. But a simple behringer board (link below) with the tape-out outputs going directly to your mic port on your comp should do the job fine. You will just need to buy the cables.
If you are recording a "live" type show just use audacity. record it and send it out.
If you want to do some editing use Reaper. these programs are free
finish it off with levelator (until you familiarize yourself with the programs) to keep the levels the same between episodes.
Total cost about 85$ with the cables.
I have run this setup for years and I get no complaints about my sound quality.

http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_1?ie=UTF8&qid=1315273854&sr=8-1

u/CatOnProzac · 1 pointr/FL_Studio

The presonus fader port isn't really going to be of any use if you are doing multitrack mixing. It is useful if your just demoing/playback a track that is already mixed.


There is no such thing as "best" for FL studio. There is only what fits your needs. So you need to figure out what your trying to do and invest in a tool that helps you with or fulfills that need.


Obviously digital consoles would work best with FL studio but an analog console will also work. For example, lots of twitch streamers use analog consoles like this one. I don't recommend Berhinger as a brand. Instead a Mackie would be a better choice. Such as this one


There is also mastering consoles but they tend to be very expensive.

u/amamdani15 · 1 pointr/BudgetAudiophile

> Can you suggest a solution to the problem, something I can try out, or a new stereo selector, preferably one that doesn't cost a fortune? The current box allows me to plug inputs and outputs in anywhere and select which I want to use. I supposed I could get by with just one input and 3 or more outputs, but I'd prefer to keep the current arrangement.
>
>

i use a mixer, which gives me the the option to adjust volume and bass, mid and treble on the fly.

something similar to this https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_3?s=electronics&ie=UTF8&qid=1523218946&sr=1-3&keywords=mixer+xenyx

u/bobofred · 1 pointr/WeAreTheMusicMakers

I think I will try audacity. I tried using it a little bit before but that was with a laptop integrated mic...

Would something like this work for plugging guitars into the pc?

u/onlygoodvibesthanks · 1 pointr/Saxophonics

I'm trying to buy a mic/effect pedals set up for my friend for his birthday. Does anyone have any suggestions of how to do it cheapest? I specifically am thinking about guitar pedals as I have some I could lend him.


I've been reading through threads and it seems like these are some options (please correct me if I've made a mistake)

​

  1. Clip on mic ->phantom power supply-> xlr to 1/4 inch converter (or passive DI?) -> guitar pedal
  2. Clip on mic -> pre-amp or active DI -> guitar pedal
  3. Clip on mic -> mixer input, effects send out -> guitar pedal -> back to mixer

    ​

    Am I missing anything out from these? I've no experience mic'ing acoustic instruments so a lot of this info is cobbled together. I would want to avoid option 3 because i think a mixer would be overkill. Any advice would be really appreciated, thanks!
u/Diamondandy · 1 pointr/Twitch

It all depends on budget.

Blue Yeti Microphone // c920 Webcam // Behringer Mixer


3 links to what you would need, if you have a decent budget, you might want to use an XLR microphone for your audio mixer, but then you would have to find a way to chat to people ingame (If you were playing CSGO for example).

u/SaaiTV · 1 pointr/Twitch

In that case you'll need an audio interface like the Behringer Xenyx 802, for example. If you want the output to be through USB then make sure the interface you go with has one.

And that microphone stand is basically as cheap as they get, you're gonna have a hard time finding something cheaper. Remember, you get what you pay for.

Since it's a condenser mic that means it's gonna pick up background noise fairly easy so you're gonna want a stand that gets the microphone close to your face so that you can bring the sensitivity down.

u/gus_honeybun · 1 pointr/DJs

I have this sat on my desk. Its not a DJ mixer, but it does what you want.

http://www.amazon.co.uk/Behringer-802-8-Input-2-Bus-Mixer/dp/B000J5XS3C

Alternatively, if your dead set on using a DJ mixer, just get something cheap and cheerful like the numark m4, I don't see much point in spending silly money.

http://www.amazon.co.uk/NUMARK-M4-Mix-3-channel/dp/B00PYVST58/ref=sr_1_1?ie=UTF8&qid=1457884561&sr=8-1&keywords=numark+m4

u/ImDISCR33T · 1 pointr/Twitch

You would need a hardware device to capture each console. Plenty of them out there from Elgato, AverMedia, Blackmagic. Then configure each one for your streaming software of choice.

I chose to go the Blackmagic path as their products do the encoding on the hardware and each device shows up as a webcam in the software making it really easy on any machine. I use this setup on my MacBook and Ive been told I could even use a MacBook Air no problem.

The next step up would be the Blackmagic ATEM Television Studio Production Switcher. This thing is amazing for multicam broadcast and makes getting up and running simple.

Your next step would be on how to get each person's voice and/or lobby chat from the console. This is going to take an audio mixer and some trial and error to get everyone to hear each other without looping their own voice. The Behringer Xenyx 802 (http://www.amazon.com/dp/B000J5XS3C/) can handle all of that and then some.

Now what would be really cool to try and do is a multicam broadcast from players all around the world into one stream. I have some ideas on how to get it done, but have yet been in the situation to give it a go.

u/calsosta · 1 pointr/askmusicians

Simply my opinion but I have used one similar to this: https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C

for years and it's been great. Just as you can see there, only one Headphone out, so you need some amp to power multiple headphones.

u/SilkyMitts12 · 1 pointr/podcasts

I am trying to do a podcast with at least two others so I definitely need an audio interface what do you think about the Behringer Xenyx 802 Premium 8-Input 2-Bus Mixer with Xenyx Mic Preamps and British EQs https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_13?s=musical-instruments&ie=UTF8&qid=1498078855&sr=1-13&keywords=audio+interface

u/awaymsg · 1 pointr/Beatmatch

You can get a cheap 2 channel mixer for less than $100 (especially if you look for used/refurbished at Guitar Center/Sam Ash). Though, if you aren't performing as a DJ (mixing), you could use a soundboard style mixer. Something like this.

I don't know anything about karaoke programs, but with a little 4 channel mixer you should be able to use one source for non-karaoke playlists, one source for karaoke playlist, and two channels for two microphones.

As far as sign up sheets/apps, if you google "karaoke sign up apps" you'll see a few free programs that might work for you.

u/zapfastnet · 1 pointr/audio

keep in mind that game and other can't share an input, at least not without an A/B switch or just re-patching. just looked again and saw that 3 inputs are from your PC, right? so maybe disregard what I just wrote. How would those three things go to 2 inputs to mix? does the computer have more than one output?

your mic is mono right? so that's 1 mixer channel.

I suspect the other inputs you list are stereo so you need 2 mono channels for each one unless your mixer has stereo channels. Most mixers have one or two stereo channels to the right side of the mixer. these other inputs ( tablet and PC) are "line level" ( not mic level) so, they typically go into 1/4 jacks on a mixer ( rather than in the mic level XLR inputs)


Something like this behriger might fit your need - if what you need is two stereo line level inputs and one mono XLR mic level input.


I did no shopping around picking this, And I am less than clear about what you have need , so take that link as a starting point

u/whatevernuke · 1 pointr/audiophile

So I'm looking to combine a couple of analogue sources (2 consoles + PC) through a mixer to my headphones.

Is there a stereo mixer that's compact and ideally on the cheaper side of things? The ones I've seen like this have a lot of features I don't particularly want or need. Would prefer to buy via Amazon UK if possible.

u/DILGE · 1 pointr/metalmusicians

Budget? Needs? Is it just for vocals? Need more info.

That said, this is the best speaker money can buy at that low of a price. If you need to amplify more than one thing, get a simple 4-6 channel analog mixer like this.

u/okrockok · 1 pointr/WeAreTheMusicMakers

Thanks, very useful info!

Regarding the XLR to 1/4", would it matter that the PA speaker itself is powered? Probably still worth spending the extra $20 to get the necessary XLR inputs though.

The application of my FX can be uniform for all 3 inputs. So would I just use the 1/4" FX send output into the FX pedal, then input back into one of the unused 1/4" channels? I'm confused because I see an "FX out" but no designated "FX In." Would I use the AUX Return?

For reference, what I'm looking at:
http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1458661832&sr=1-1&keywords=mixer

u/lime-link · 1 pointr/podcasts

Ok you'll need 4 mics then. Using a cheap AT2100 will still deliver great audio quality.

Now you plug those 4 mics either into a Zoom H5 or a Behringer mixer. From there you can feed the signal into a laptop for recording.

Obviously you'll need XLR cables for this too.

Then you can use Audacity or Garageband which are free editors to edit the show to get started. You could use a free trial of another one like Hindenburg if you want to try a better one.

That should be all you need equipment wise.

Then you need to host it somewhere. Maybe your company can whip up a website and let you host the files there somewhere. Otherwise you're looking at Libsyn at $7-$20 a month.

u/whateverisfree · 1 pointr/letsplay

Here's a mic that is good for cancelling out background noise while picking up voice really well. It needs a nice audio interface too. That's the setup I'd go with. The interface mixer combo allows for precise equalizing to your satisfaction and the mic is a neat entry level vocal mic that can be upgraded later on if you feel the need for it. Great starter kit around the desired price point if you ask me.

u/Anipsy · 1 pointr/audioengineering

I'm looking for something that would allow me to connect my blue yeti pro mic (stereo xlr, requires phantom power) to my computer. Also need to mix sound output from two computers (onboard audio) to one set of headphones. Would this mixer do or are there better options / more hardware required ?

u/Th3irdEye · 1 pointr/audio

Thanks for the awesome reply. I realize that the unit I linked above would not work that way I wanted it to. That's why I figured I would ask here. Would something like this one work for my purposes? Here is a diagram of it.

So basically I would plug in my mic into 1, turn the level pot all the way down and the fx pot all the way up. plug my pc into 3/4 and console into 5/6 both with level adjusted accordingly and fx all the way down. Then for outputs the FX send would be plugged into my sound card for the mic and I would plug in my speakers to the main out and headphones to phones, correct?

Oh, so i just read that the unit I just linked has 2 busses but in the details it says that it has POST fader aux sends which is bad, right? maybe I should look at something else. Are there any recomended brands? My budget is higher than the $65 cost of the unit above. I could easily go double that, but I'm trying to remain cost effective.

u/Mr_Refused · 1 pointr/Beatmatch

http://www.guitarcenter.com/Nady/MM-242-4-Channel-Mini-Mixer.gc

This is not bad if you want something soon and on the cheap, but it doesn't have an EQ which is also something you'd want. You'd also need stereo 1/4" to 3.5mm cords... And assuming your controller has 1/4" outs.

If you're willing to wait for Amazon this is a little more versatile in terms of connections and does have an EQ.

https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_3?ie=UTF8&qid=1521050188&sr=8-3&keywords=4+channel+mixer&refinements=p_72%3A2661618011

u/alaskaman42 · 1 pointr/DJs

Ah I see, I noticed that the first time I DJ'd for a party. My friend had a set of wires that worked as a mixer, but no mixing controller like this. I have kept an ipod ready, because crashing and malfunctions happens far too often without a legit setup, but never considered having it ready in a separate channel, so that's awesome.

So most speakers have cords which go into mixers? if not what kind of wire setups do they have, and do most speakers need separate adapters to plug into a laptop?

and Do mixers have their own separate programs which connect straight to the computer/laptop?

I've seen preview buttons on some programs, now I can see how they are useless without having two audio outputs. I've always wanted to mix with Ableton-esque programs, so I can make legitimate remixes, rather than just looping sound and adding in samples :)

My problem is, when I watch most DJ's with professional controllers and equipment, I hardly ever see them doing any work. Many times I have seen DJ's be working on the mixing (the previews) and nothing looks live (For example, I often see a DJ scratching and changing EQ traits, while the current song is playing and never hear an alteration later). I'll definitely try out some equipment at next opportunity, unfortunately, I'm in Northern Japan for the summer and access to a good store is distant.

Thanks for the links!! I'll do some research!

u/nawitus · 1 pointr/audiophile

I would trust that Behringer makes good, affordable mixers.

u/_______butts_______ · 1 pointr/diyaudio

My bad must've messed up the copy paste. The model is a Behringer Xenyx 802.

http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C

I have a general understanding of what I need to do, connecting the ports on my PC/sound card to the mixer but I could use help on the details and I'm not sure how to split the audio to different ports on the same card so they can be routed to the mixer channels.

u/Cpt-Hook · 1 pointr/recording
u/KorgRue · 1 pointr/WeAreTheMusicMakers

You need a DAC (and I would recommend a MIDI to USB interface so that he can plug in a midi keyboard)
and a pretty inexpensive MIDI interface as well as a small mixer to balance his inputs:
https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_3?s=electronics&ie=UTF8&qid=1479741584&sr=1-3&keywords=mixer

http://www.sweetwater.com/store/detail/MTrack2x2M

If he plan to do all music via software only, then all he needs is a DAC for his monitors.







u/DearHormel · 1 pointr/podcasts

You might have to get a mixer. I use the xenyx q802usb. $65.

http://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C

u/Jung_Groucho · 1 pointr/psychotherapy

In the recent past, I did a deep dive into audio recording as a hobby / avocation. (I actually made some money being a sound person for some indie movies). At one point, I probably had somewhere between $5K - $12K of audio equipment.

Here's what I learned:

  1. Capturing quality audio is very difficult (it's actually one of the most difficult parts of making movies)
  2. In audio, you get what you pay for

    You're in the range of $300 - $500, it sounds like. The Zoom H5 is $300. A pair of microphone and mixer is going to run you more. I'm not familiar with the Jabra 510, but it's $100 on Amazon. (I'd be skeptical of this based on your needs.) Unless you're prepared to spend significant amounts of money, I would really recommend:

  3. Use your cell phone (I've been impressed many times with the quality of the audio capture ability of the iPhone (which is doubly impressive since it completely sucks as a phone). I've had clients who are in sound design who have used an iPhone for a voice over mike in a pinch. Just make sure you have enough storage space on your phone for a full hour session.
  4. Manage your environment.
    1. Pick a client who speaks up.
    2. Chose a room (if you can) that lends itself to audio capture. Recording studios walls are 'padded' for a reason. A gymnasium is an absolute nightmare for capturing audio. Pick a room that is more like a recording studio (soft furniture, carpet, etc) and less like a gym (bare walls, bare floors, nothing soft to absorb the soundwaves bouncing around a room.)
    3. Move your chairs closer together. Put your iPhone on a table in between the two chairs, microphone facing both of you. If I had to record a client for supervision, I wouldn't pick a client who is too soft or speaks too rapidly.

      Clients are going to speak too softly or too rapidly at times. That's life. Again, capturing pristine audio in the wild is very, very difficult. (Movies make it look easy, in part 'cause actors learn how to work with the mics for audio capture. If they just talked "normally", much of the dialog would be lost. And recording studios spend tens of thousands of dollars on acoustical treatments for their rooms. For a reason.)

      Hopefully, your supervisor does not unreasonably expect perfection. When I've listened to recordings made by my supervisees, I don't expect perfect audio. I expect words to get lost sometimes. Again, that's life.

      If you're bound and determined to spend money ....

  5. If you buy one microphone you want what's called an "omnidirectional microphone" (there are different kinds of mics)
  6. If you are buying two mics, consider Rode microphones. They're an Australian company and make excellent, low-cost (relatively speaking) microphones. Their NT3 microphone is vastly under-rated. If I was setting up an interview room on a lower budget, I would get two NT3 microphones.
    1. https://www.amazon.com/Rode-NT3-Medium-diaphragm-Condenser-Microphone/dp/B0002PSCQW/ref=sr_1_3?keywords=rode+microphone+nt3&qid=1555285885&s=gateway&sr=8-3
  7. If you buy a mixer, you have to have something to record from the mixer into. Phones and laptops are possibilities here. For the price, Behringer makes decent stuff:
    1. https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C/ref=sr_1_4?keywords=audio+mixer+xlr&qid=1555286107&s=gateway&sr=8-4
  8. Don't forget the mic stands. And cables.

    ​

    Again, bottom line: I recommend saving your money and use your smart phone. You can use the money you save for your student loans. And a smart phone is far, far less intrusive on the client's space than a dual microphone set-up with a mixer. (Which is sort of important, no?) And less of a distraction for you. With less things to go wrong.

    I'll be curious to hear what you decide.

    Good luck!
u/hxcxdonneee · 1 pointr/audio

I'm pretty confused about your picture if your going a mixer route though, as different mixers alone could solve all 3 of your needs/wants. Let me ask this instead: are you just trying to switch just your mic? are you recording your ps4 gameplay/sound? (i'm wondering why you want to run your ps4 audio through pc) i'll suggest these items then along with adding a detailed picture of how I'd set it up:

trrs spliter: https://www.amazon.com/MillSO-3-5mm-Jack-Adapter-CTIA/dp/B071NDLCGC

that mixer: https://www.amazon.com/Behringer-802-Premium-8-Input-Preamps/dp/B000J5XS3C

1/4 to 3.5mm cables: https://www.amazon.com/CableCreation-Plated-Stereo-6-35mm-Meters/dp/B01JY2DD9Y

trs switch: https://www.amazon.com/STEREO-Manual-Speaker-selector-available/dp/B073GWCRP3

(x2) 3.5mm cables: https://www.amazon.com/AmazonBasics-3-5mm-Stereo-Audio-Cable/dp/B00NO73Q84/

(x2) ST splitters: https://www.amazon.com/iXCC-Splitter-Computer-Multimedia-Speakers/dp/B07259J93F

PS4 usb audio: https://www.amazon.com/KOTION-External-Headset-Adapter-Laptops/dp/B07DRF9TPC

(x2) 3.5mm adapters: https://www.amazon.com/Aurum-Cables-3-Pack-6-35mm-Adapter/dp/B00XAVOW00/

Note: you can get cheaper alternatives to every item i listed from any othersite besides that mixer. Any mixer that has an FX Send/Aux Send will work.

​

https://imgur.com/a/hPTPcnj


you can negate the switch entirely if you just want to use knobs on a 2-aux send mixer.

u/Proper_Refrigerator · 1 pointr/pocketoperators

So one that I am considering, based on recommendations is this and someone also suggested I get a mixer so I'm considering this too. Though I like the idea of keeping it simple and perhaps buying a separate mixer, thoughts?

u/bluesatin · 1 pointr/letsplay

Unfortunately I'm no expert in the area.

You'd probably be better asking in something like /r/WeAreTheMusicMakers

Getting a mixer second hand is probably your best bet, but off the top of my head you'd need something like:

u/Yentihs · 1 pointr/vinyl


Hello currently I have this setup:

https://imgur.com/a/0Ex48 The output goes to my monitor speakers, 3.5mm output goes to headphones.

The two inputs are from my PC (using RCA via a DAC) and a turntable

Now my question is how would I go about upgrading to this? (and do I even need to upgrade to this, I heard sound would be better?) :

https://www.amazon.co.uk/gp/product/B000J5XS3C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

How do I now connect my RCA stuffto the 1/4? jacks? and would this help with sound?

Is it ok to use something like this to connect the output to my speakers? https://www.amazon.co.uk/gp/product/B01CT1XHMU/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Same goes for my 3.5mm output

Sorry for all the questions,

Hope you can help!

u/ComfyPillows · 1 pointr/gadgets

I agree wth djsci. I would like to add that I would buy a cheap mixer as well. Like this Instead of having to get cables and adapters to split the signal to two seperate speakers just plug the ipod into the mixer (probably through the rca ports) and the speakers into the mono outputs. Now you can turn down the speakers before unplugging the ipod(nobody wants to hear that popping sound) with out climbing behind each speaker and you can plug in a mic and make announcements if you felt so inclined.

u/SteeleKinne · 1 pointr/audio

After doing quite a bit of research, the ctrl out is independent, so if anyone is looking for a solution to this problem, this mixer is a perfect solution. It allows you to independently control the two outputs!

Thanks again to /u/Dodgeballrocks for the help!

u/theonewhoabides · 1 pointr/drums

If you have the ability to mic your drums and mix that signal with what you're playing with it will help, a lot.

But the 215's dampen the volume, but don't completely block it out. So you can still hear your drums at a lower volume but can easily hear the music. For the price they cannot be beat.

If you have some cash flow check out a small mixer, something like this, it will allow you to add a mic and control the balance. When you play with a mic you can really hear every little thing you do. It forces you to pay attention to the details.

u/joey2506 · 1 pointr/podcasts

I'm guessing you're recording in the same room? You'll need a USB mixer. Anything that handles more than 2 mics starts getting pricey, though.

Something like this can handle 4 mics:

https://www.amazon.com/Behringer-Premium-12-Input-Multi-Fx-Processor/dp/B000J5Y214

u/mixermixing · 1 pointr/audio

The mixer/amp has bad reviews. I'm thinking along the lines of this behringer 4 channel amp and this behringer mixer.

u/nostradamefrus · 1 pointr/podcasting

TBD. We were honestly hoping to get a few episodes in the can before making any major investments, but that might be unavoidable. Here's what I'm looking at so far:

Mixer option 1

Mixer option 2

Mics

Audio out to laptop

XLR cables for phantom power

The mics each come with an XLR to 3.5mm cable which would be swapped out. I'm leaning more toward 4 mics and to have people share mics if we have additional guests. 4 is probably more realistic than 6.

u/Davidwade1991 · 1 pointr/casualiama

The Making of

I decided to start making videos because a friend of mine (who happened to be roommates) decided that we were fairly funny and that it wouldn't be a bad hobby to just try out. Originally we started with hour and something long podcasts 4 years ago. At some point we decided that playing games for people on a regular basis wasn't a bad thing so we started streaming daily got to 150 viewers but we lost our home and had to move over 100 miles from one another and it got harder to stream on a regular basis and fell back into Youtube a little over three months ago. So that is how we started oh so many years ago

TL;DR We thought it was a fun hobby and really enjoyed making people laugh

Hardware

u/macetheface · 1 pointr/drums

Thanks - I saw it had 2 XLR inputs and was planning on using just 2 mic's for now. Maybe the 4 XLR would be a better choice in case I wanted to add a couple more?

Just wondering why you say 8 mix pres? Does that mean 8 potential mic's? I'll take a look at the link though...

u/CharlesAtlas · 1 pointr/audio

Thanks a lot! I have the software, full access to Adobe Creative Cloud, so I'll be using audition to edit. I've had a bit of experience on the software end so that I'm not nearly as worried about.

http://www.amazon.com/dp/B000J5Y214/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=CY3NY8NFU4B3&coliid=I3VMBLU3FFDZA6

thats the mixer I was looking at before, but it doesn't have the multiple outputs, or if it has that capability then I would have no idea how to use it. What I've come up with is that I need an audio interface like one of these mixers, which if it doesn't have usb then I'd need a device that would take RCA audio into usb, but I can't find one of those that would take 4 separate inputs other than an internal card that no one seems to sell anymore.

I also saw this one:
http://www.amazon.com/dp/B005EHILV4/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=CY3NY8NFU4B3&coliid=I1FGVEGGKV9LTG

but it seemed like I would need 4 of these in order to get 4 mics on 4 tracks.

u/eatenbyfnord · 1 pointr/WeAreTheMusicMakers

I think the solution you're looking for is a small format analog mixer, something like this. that will let you downmix to 2 channels in, on the cheap. Using multiple interfaces on the same computer is always dicey. I used to run a live recording rig with two of the same Motu Usb interfaces, which looking back I have no idea how that worked. If they were unplugged, the software wouldn't know which one was which, and your channels would swap unpredictably.

u/blahblehblah22 · 1 pointr/audioengineering

Help with audio equipment for live vocals


Hello, I could really use some help thinking thru the best setup for right now while having some flexibility to upgrade easily in the future. I'm thinking of buying either 1) a portable PA w/ built-in mixer and speakers or an 2) acoustic guitar amp or 3) just a mixer and use existing speakers.

Here's what I want to accomplish right now:

- Karaoke nights with kids/adults. I have both a condenser and a dynamic mic and we'd (I may buy another dynamic so we don't need a stand). I'd like to throw some karaoke parties in our basement supporting, at least, duets along with backing track input (YouTube to the rescue!).

- Mini-gig nights with family/friends in my house supporting 1-2 mics for vocals and 1-3 instruments like acoustic-electric, mandolin, and digital keyboard.

- Solo performance at the house: just like the above but 1 mic and 1 digital keyboard (or maybe the acoustic piano instead)

Here's the struggle I have: the decent all-in-one PA systems are pretty damn expensive and overkill for my needs right now (basement / smaller rooms in house don't need that much juice) although a longer term goal (say 1.5 years out) is for me to be a keyboardist in a band (but seems silly to make such a large advance purchase for future dreams). A ~60W acoustic amp seems nice but they're much more expensive for combo XLR/line inputs (allowing for 1-2 mics + 1-3 instruments).

What are my best options with the current equipment I have to meet the use-cases I mentioned above?

- Focusrite Scarlett Solo USB (only supports 1 mic)

- Audio-Technica AT4040 Cardioid Condenser

- Shure M58

- Edifier R2000DB

I threw in the Edifiers because here's an idea I came up with that's least expensive, for now, while allowing me to upgrade to my own PA speakers/acoustic amp later on: could I buy a Behringer XENYX 1202FX mixer and hook that up via RCA to my Edifiers? It should be sufficient to fill the basement/living room in my house for karaoke + mini-gig-nights, right? The Edifiers are powered w/ amps so it should be fine to feed the mixer, yes? Would an acoustic amp/PA speakers give much better "live music" sound when thinking about karaoke/mini-gig-night?

​

Please help!

u/elphio · 1 pointr/italy

> La cosa migliore sarebbe sprecare 5 minuti prima di ogni conferenza per regolare i volumi facendo parlare chi deve parlare, magari spostando il mixer in posizione controllabile (cassetto a sinistra?).

Fortunatamente questo setting, durante le conferenze, funziona anche dato che al massimo abbiamo 2 o 3 relatori.

Il problema è durante le assemblee o le riunioni dove i "relatori" possono essere anche 10 che si avvicendano al microfono.

Se nel cassetto, che anche io avevo individuato come posizione ottimale, mettessi un mixer simile?

Quindi avrei 34Mic+PC > Mixer Beringer > Mixer di sala.

Così nel mixer di sala avrei un unico Input (in realtà quel mizer gestisce anche l'audio della telecamera ma sorvoliamo su quello) derivante dai 3 input del beringer.

Il Beringer lo tengo chiuso a chiave e lo apro solo quando devono essere settati i volumi della giornata. Poi di nuovo richiuso fino alla futura necessità.

u/Obscure_Username_ · 1 pointr/letsplay

Speaking from a future proofing and number of inputs perspective, something like a Behringer xenyx Q802 is much more extensable and has many more inputs for basically the same price. It's got low, mid, and high EQ as well as hardware compression and a pretty nice quality DAC for headphones. They have basically the same (only slightly different) audio quality, and there's a FX version of the 1202 on sale for $93 right now which has a built in FX processor (though I honestly don't know what special magic you can do with that, but its only slightly more expensive for more inputs and stuff too.)

u/camopdude · 1 pointr/AskReddit

Are you looking to mic multiple people at the same time?

I would suggest a lavalier microphone for everybody, these are a good deal for the money.

If you don't get a Mackie mixer, this one might work for you.

If you're just looking for a tripod to stabilize the camera, and you don't plan on panning or tilting smoothly, you can go pretty cheap.

And you'll need to think about lighting.

u/fieryblackbeard · 1 pointr/podcasting

I need just a relatively basic mixer that has 4 xlr inputs

would this be a decent mixer then

u/plumbus_007 · 1 pointr/DJs

The RMX units should be used as an insert on the master channel. DJM mixers have the ability to insert hardware effects into the master channel, while the Xone 92 does not. I'm guessing that you had the RMX unit connected to your DJM750mk2 via the send and return jacks, and had the return type set to insert. This routes all of your audio through the RMX and you hear only the output of the RMX unit.

​

When you connect the RMX to the Xone via the aux 2 output and return 2 input (the image you posted of your setup appears to be connected in this manner, but the diagram you linked shows the mix 2 output feeding the RMX unit. DO NOT CONNECT THE RMX UNIT AS DEPICTED IN THIS DIAGRAM, it will cause feedback), you are hearing both the original signal that goes into the RMX unit and the output of the RMX unit. This is why you are able to hear the sequencer/noise effects, but not filter effects. The filter effect is working, but you are still hearing the original signal so you don't notice any change.

​

Try setting the aux 2 send on channel 4 to pre (by depressing the pre button under the aux 2 knob) and lowering channel 4's up fader. Now with the aux 2 knob on channel 4 turned up, you should hear the RMX unit working as you expect it to. This is because you are know only hearing the return channel.

​

The proper way to use an RMX unit with a Xone 92 is to run your master output to the RMX unit and route the output of the RMX unit to your amplifier/speakers, not back into the Xone 92. The downside to this setup is your are not able to record the RMX unit via the record output of the Xone 92. In order to record your mix with the RMX effects, you would need a way to split the signal from the RMX to go to a recorder and the amplifier/speakers. Typically this is done with a second mixer (not a dj mixer, something like this).

u/AlecMachet · 1 pointr/letsplay

Keep in mind with that mixer you have no real room for expansion. It only has two ports for XLR. Spend a little extra and go with this one if you're on a budget.

I honestly wouldn't use behringer for mixers after my personal experience with them. They make pretty decent mics (I've been using a set of these for years and have been very happy although I wouldn't discourage you from getting the mics you linked), but I had one of their mixers and it crapped out in less than a year. Maybe if you've got a stationary setup it will do better, but we're kind of a mobile operation and those mixers are not durable.

u/sukhvirbirdi · 1 pointr/audiophile

Yeah, USD TO CAD $290 + (MP shipping) 40$.. I think that's how that price is made up... not sure if they tax it. the ETA shipping would be July 10th to 17th aka I think they ship it from the US.

also it's a great setup for my desktop, but I need to figure out how to have multiple inputs without buying a Reciever... I thought about getting a mixer but I'm nervous about noise..(Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and British EQs - https://www.amazon.ca/Premium-12-Input-2-Bus-Preamps-British/dp/B000J5Y282/ref=sr_1_3?s=electronics&ie=UTF8&qid=1498564571&sr=1-3&keywords=mixer)

I need input for a Macbook, DJ set & Desktop (DAC Aune t1 mk2)

u/Ultrastxrr · 1 pointr/techsupport

I do this for my lil ghetto karaoke setup,
Get a cheap mixer, i personally use a behringer:

Premium 12-Input 2-Bus Mixer with XENYX Mic Preamps and British EQs https://www.amazon.ca/dp/B000J5Y282/ref=cm_sw_r_cp_apa_i_pzeKDbHGTRSFM

u/katakoon · 1 pointr/podcasts

You could always try this Behringer ULTRAVOICE XM1800S Dynamic Cardioid Vocal Microphones, 3-Pack (at 30-40 bucks a pop you can buy two for SIX mics) and TASCAM DR-40, and as many of these splitters as you need. We've put our mics into these splitters and they work splendidly. You'll also need XLR cables for the mics as well. If you have two friends who are louder than everyone else I guess you could also buy a mixer for a little more control.

Anyways, I have the DR-40, Behringer mics, and the splitters. They work pretty damn well for how cheap you can get them. You get great portability, as well.

A lot of these guys are probably a lot more pro than me, so they're probably the ones to listen to if you want to be super legit. If you are on a budget, though, I can confirm that this setup works quite well! Minus the mixer you could probably get everything for six people having a their own mic for ~$300.

Edit: The DR-40 comes with a 2GB memory card but you might want to upgrade it a little bit just in case. SD cards are pretty cheap now, though!

Edit Edit: You'll also want some stands, too... and these windscreens.

It might end up around like $300-$400 bucks. But when some of those Blues cost $100 per mic for the cheapest ones, it's kinda a good deal for all of the stuff you'll get. Also, if podcasting doesn't work out you now have all the equipment to start a karaoke bar.

u/jasrags · 1 pointr/podcasts

If you want to spend money and not just use your laptop you will need the following.

3 XLR microphones, stands and cables
A mixer with at least 3 XLR inputs
If you want to all listen on headphones you will need a splitter for that
A few assorted cables i will list
And garage band or some other recording software.

I have listed below what i used starting out.

[Microphones] (http://www.amazon.com/gp/product/B002T45X1G/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1)

[Stands] (http://www.amazon.com/gp/product/B0002M3OVI/ref=oh_details_o08_s00_i01?ie=UTF8&psc=1)

[Mixer] (http://www.amazon.com/gp/product/B000J5Y282/ref=oh_details_o08_s02_i01?ie=UTF8&psc=1)

[Headphones splitter] (http://www.amazon.com/gp/product/B000M0TN6U/ref=oh_details_o08_s01_i00?ie=UTF8&psc=1)

[Microphone cables] (http://www.amazon.com/gp/product/B008B2DBY6/ref=oh_details_o08_s02_i00?ie=UTF8&psc=1)

[Other cables] (http://www.amazon.com/gp/product/B005HGM1D6/ref=oh_details_o08_s02_i02?ie=UTF8&psc=1) These are used to go from your mixer into the recording device and also from the mixer into the headphone splitter.

Hope this helps.

u/Ultramerican · 1 pointr/audioengineering

Whoops - you'll want a small cheapo 8-track mixing board to dump the drums out to a single output like this one. Spend as little as possible, you just want basic levels and 3-band EQ functionality for this.

I'm also of the opinion that OP should get at most the 4-mic kit I linked for the drum kit. He doesn't know shit about recording yet, so it's best to KISS - keep it simple, stupid. Just drop a kick, a snare, a toms, and an overheads mic. A good kit, tuned well, and a good drummer are way more important than getting an individual mic on every single bit of the drum kit. It will teach him to figure out good mic technique as well as save him hundreds of dollars as a high school student.

u/draggingalake · 1 pointr/podcasts

You could do something like this:

  • $99 Behringer USB Mixer

  • $54 x 4 Audio Technica ATR2100 USB

  • $13 5-Pack Foam Pop

  • $26 5-Pack MF XLR Cables - 10'


    Then you just need mic stands. You could probably even find cheaper Pop filters and/or XLR cables, I just did a quick search. Those mics are both USB and XLR and they are actually pretty decent for the price, so not a bad investment. You might want to look at different mixers, but that Behringer is one of the most affordable USB ones. I prefer using a Focusrite, but those are 3x the price usually.

    Edit, those mics actually come with XLR cables! I forgot. Not sure if they are long enough, but they should work fine too. Although some pack in XLR cables are super cheap.
u/NovaKitFoX · 1 pointr/letsplay

I jsut made the switch from a Blue Yeti to a Dynamic mic and XLR set up. I'll post what i picked up. May be a little over kill for solo but gives plenty of room for expansion.

First up, the MIC

Audio-Technica AT2005USB Cardioid Dynamic USB/XLR Microphone

This as it states is a DUEL USB and XLR Dynamic Mic. Since I got it i have loved using it for LEt's plays to just Team chat in games and at Lan Parties. It's got what you expect from a USB Mic. Has a Headphone jack and on board volume for the headphones, And an ON/OFF switch. But then it is also XLR compatible. So it's not something you will toss out the door when you move to XLR.

To go with it i got a desk mount Etubby Adjustable Desktop Microphone Suspension Boom Scissor Arm Stand Holder and some better Mounts for the stand. I have it set up so i just push it out of the way when i don't need it.

As for a mix board i have picked up this
Behringer Q1202USB 12-Channel Mixer.

As in the name as well this is a USB mixer. This does have phantom power if needed, has 4 XLR Inputs , and 12 Channels. And it's only 100 bucks or less depending on Amazon's Mood. And if you got any Music stores around you, This is also sold by GUITAR CENTER in the states, So you may be able to find it locally for same or cheeper.

Since i got it, I Had a little bit of a learning curb and the need to turn up the Compression on the mic channels. First recording with it was well a little blown out. I use this even when solo now cause I get more control over the MIC levels. It's easy to use in windows as it is very much plug and play. Shows up as USB AUDIO CODEC in windows. And if you want to, you CAN send you audio back out through it. Though that part i'm still learning on if it's usable in recordings or not.

I'm Not sure how much Cost wise that will Translate into £'s. But this over all Cost me $180 just for the mic and Mixer. The Mic did come with an XLR cable with it, so you do not need to buy one unless you need it to be longer.

Long post, I Know, But hopefully that gives a few useful suggestions for ya.

u/morjax · 1 pointr/letsplay

Recording two people with one mic is tricky to keep levels right, and worse still for three people. I don't have that mic, so I can't say how well or not it would work. It might be great, but I just don't know either way.

One other option to consider is getting multiple individual dynamic mics (dynamics can exist relatively close to each other without being picked up by their neighboring mic). Most 3+ port interfaces are $200 and up, but this one is about $100 (and maybe less if you can find it used?).

Pairing that with three entry-level dynamics (like the PG48) or similar, again, search for used) may give you a more flexible end result than a single condenser (albeit at a slightly higher price point).

I'd be curious to know what you go with and how you like it, if you don't mind updating me. Improving information in my creator's guide regarding recording multiple people is something I 'm very interested in!

u/AStuffedRowdy · 1 pointr/audioengineering

Sorry if this question is coming in a little late. I'm looking at two audio interfaces to use for 4 mics for a podcast and I'm wondering if anyone has any experience with them.

The first is the Behringer U-PHORIA UMC404HD.

The second is the Behringer Q1202USB 12-Channel Mixer.

I'm leaning towards the UMC404HD, it's got a smaller footprint and is lighter by 4 lbs (so it'll be easier to transport), but it seems to be on perpetual backorder pretty much everywhere. The Q1202USB is available and about the same price (and most importantly available), but I don't really need the mixing board aspects. I'm also seeing varying reports of whether or not it outputs via USB to a single or separate tracks. Help? Thanks!

u/IdmonAlpha · 1 pointr/podcasts

Oh, yeah, I'm wanting to start off as economically as possible. I also value flexibility, which is why I am leaning towards a mixing board. I don't ever see use doing Skype unless we somehow get big (which I have no delusions of). I found this q1202usb for only $75. Should I jump on that?

u/CaptainWackee · 1 pointr/audacity

oh, sorry, yeah it would be recorded on a single track that way and you would need to adjust the levels on the mixer. alternatively you could use 3 recording devices and then import them to separate tracks or maybe look into a usb mixer like this one: (will have to look into if it will send multiple channels to your PC) https://www.amazon.com/Behringer-Q1202USB-12-Channel-Mixer/dp/B008O517IW/ref=sr_1_10?s=musical-instruments&ie=UTF8&qid=1502774057&sr=1-10&keywords=usb+mixer

u/xlane3499 · 1 pointr/letsplay

I use to do multi person let’s plays so I have one of these https://www.amazon.com/gp/aw/d/B008O517IW/ref=mp_s_a_1_6?ie=UTF8&qid=1525704957&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=4+mic+mixer&dpPl=1&dpID=5153d6epzTL&ref=plSrch is actually trying to sell it plus we used 4 at2020 Mics XLR I have 2 of those for sale and will throw in xlr cables if you want

u/lowheartrate · 1 pointr/audioengineering

OK awesome, thank you I will keep that in mind a long with the picture / diagram that I made. Looks like I will be investing in a smaller sound mixer - Are you aware of one any smaller / essential for this task other then the Behringer q502 USB?
ORRRRRR
Wouldn't the Behringer 1202USB Sound Mixer allow me to use the microphone pass through AND the whole task I am trying to get right now at the same time on this sound mixer?

u/ThatGuyWithAVoice · 1 pointr/Twitch

Everything this guy said is on point. This mixer fits the bill in every way.

It may seem daunting at first if you've never dealt with live audio, but it's extremely simple

u/calee17 · 1 pointr/audio

Behringer Q1202 USB is even cheaper and as far as USB mixers go that supports 4 XLR mics, it's the cheapest.

http://www.amazon.com/Behringer-Q1202USB-12-Channel-Mixer/dp/B00CTKI45M/ref=sr_1_1?s=musical-instruments&ie=UTF8&qid=1459134032&sr=1-1&keywords=behringer+xenyx+q1202usb

You have 4 condenser mics which means you'll need to supply phantom power to them.
If you want control over all four mics in post-production, you'll want the USB mixer.

u/JabawaJackson · 1 pointr/FL_Studio

Gonna jump in and suggest a behringer mixer. Comes in different sizes for relatively cheap. Super versatile as well, i use it for tons of different things. Also has phantom power in case a mic comes into play. 1202 is at a good Price Right now

u/joshharoldson · 1 pointr/podcasts

There is a way using Soundflower if you're on a mac or try this other reddit thread if you're on a PC.

However, that is definitely going to be a bit of headache. The much easier, but obviously more expensive solution, down the line would be to use two XLR mics and a mixer. A mic like the ATR2100 that is USB / XLR is a very good choice and what my wife and I use on our show. From there any of the inexpensive Behringer mixers are really all that you need. So for just over $200 you have a very scaleable set-up. Add in a Zoom H1 / H4 and you don't even need the computer anymore.

u/RaptorUTO · 1 pointr/pcmasterrace

For the mic?

In that case, get an MXL 770 and a Mackie 402VLZ4.

(I'm a producer if you can't tell)

u/FilthyTerrible · 1 pointr/Guitar

Well in this hypothetical, assuming my friend doesn't live in a van down by the river, couldn't we share his amp, iPhone, tablet or computer while we jam? But if you're going to jam with your friend at his house and he only has a single input on his amp, perhaps he was equally foolish and bought a Fender frontman 10G then I guess I need a 1/4" Y splitter for $5.00.

https://www.amazon.com/Hosa-YPP-118-inch-Dual-Cable/dp/B000068O56/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1480701257&sr=1-1-catcorr&keywords=1%2F4+Y+splitter

But if that's what I do, if that's how I play guitar, then there are other types of gear I'd spend money on:

https://www.amazon.ca/Behringer-MX400-Ultra-Low-Noise-4-Channel/dp/B000KGYAYQ/ref=sr_1_1?ie=UTF8&qid=1480701616&sr=8-1&keywords=4+channel+mixer

https://www.amazon.ca/Mackie-402VLZ4-4-Channel-Compact-Mixer/dp/B00EDRUQXC/ref=sr_1_2?ie=UTF8&qid=1480701709&sr=8-2&keywords=4+Channel+mixer

Any of these three purchases are for gear that I will use and reuse if I become a professional musician. The Frontman 10G, I will discard into the trash bin when I get a good practice amp or rig.

u/tcookc · 1 pointr/Twitch

there is a Makie mixer with better preamps that will run quieter, the 402VLZ4 and the larger 802VLZ4.

But I promise you that what you really want is an interface, not a mixer. this one is very popular and will allow two mics. there are more expensive ones with more inputs. Then for a mixer, use a DAW. Reaper is free and fully functional.

u/SarcasticOptimist · 1 pointr/Guitar

A basic USB mixer like this Behringer (with external power supply) should handle the monitor switching. Mackie (not USB until it's around $300) and Alesis are higher end (better featured, sounding, durable) and will cost around 3x as much. Plug the computer via USB (the mixer is now your new soundcard), and the POD through the line-ins. I recommend getting active monitors, ideally used to maximize your budget. Get cables from monoprice.

u/jesseholmz · 1 pointr/WeAreTheMusicMakers

what do you mean? how do i get the music i'm singing over to come back through the mixer without running a line back into the mixer? this is the mixer

u/techd0rk · 1 pointr/audioengineering

if i am recording directly into a recorder such as a tascam DR, where would i plug it into on this mixer: https://www.amazon.com/Yamaha-MG10-10-Input-Stereo-Mixer/dp/B00I2J4TWG to record the master output signal? the monitor out is occupied, as well as the stereo out XLR and TRS. Thanks for your insight!

u/StickButter69 · 1 pointr/podcasting

Yamaha MG10

Amazon Link

u/OMGITSDJREMAX · 1 pointr/DJs

No, you can’t connect it directly out of your controller. Your controller uses RCA (the red and white) as outputs and those speakers take 1/4 jack or XLR cables. My advice is to buy a little soundboard like soundboard
Then plug into that board on the rca (white red) Inputs and out of that board with xlr cables into the speakers. Hope this helps

u/Stanleeallen · 1 pointr/guitarpedals

Well, I think it would be better to just find a mixer with what you need included. Something like this would probably do the trick.

u/dickturnbuckle · 1 pointr/Greekgodx

https://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Effects/dp/B00IBIVL42

use this, has a built in condenser that will keep your audio compressed and nice sounding.

u/CASTorDIE · 1 pointr/Twitch

I use the Yamaha MG10XU , and here is the El Gato StreamDeck.

u/SniperNick · 1 pointr/Twitch

Most people would recommend a Focusrite Scarlett. I’ve used this one and would recommend it. https://www.amazon.com/dp/B01E6T56EA/ref=cm_sw_r_cp_api_i_2.dwCb77C72DN

You could also look into an audio mixer which could give you more possibilities for future proofing. I currently use the Yamaha MG10XU and it’s also been fantastic. Although it doesn’t work exactly how I want it to for a dual pc setup but you might not have that issue. https://www.amazon.com/dp/B00IBIVL42/ref=cm_sw_r_cp_api_i_AeewCb65EAS4W

u/Correa24 · 1 pointr/podcasting

Don't apologize for giving it to me straight! I took everyone's word here and decided to help myself out a little. Snagged a $70 gift card from amazon and that helped my budget out immensely, ended up getting a sweet deal on a Yamaha MG10XU (got it used for $160 dollars well within my budget when combined with the gift card)

u/mayhempk1 · 1 pointr/Destiny

Destiny's mic is a condenser AFAIK which means it's more detailed, the SM7B that Reckful has is a dynamic which means it blocks out background noise quite well but requires a lot of gain to power it.

The Blue Bottle that Destiny has is good and so is the SM7B, they're just different. The SM7B definitely has "legendary" status like other mics like the RE-20, U47, etc have even though the Blue Bottle doesn't but it's still a nice mic.

I must say, though, Byron's voice sounds REALLY fucking good on the SM7B and I'd love to know his entire audio and video setup.

edit: Byron has this mixer: https://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Effects/dp/B00IBIVL42 it seems really good and has USB.

u/A1SteakSpoon · 1 pointr/audiophile

Looking for help planning out a mixer

Here is a diagram I tossed together
- https://i.imgur.com/maL2zRn.png

Yamaha MG10XU 10-Input Stereo Mixer with Effects

  1. Audio from PC (ex: music, games, etc) would enter mixer via the Mixer's USB-in (blue wire)
  2. Audio from Mac, Server, & Surface laptop would each have their own channels in the mixer
  3. Audio from Skype would pipe right to headphones
  4. Headphone mic enters mixer on channel 1 (and 2 if stereo mic)
  5. All channels mixed and pushed to Mixer's Stereo out
  6. Mixer's Stereo Out pushed to PC Sound card's mic port (pink)
  7. Enable Listen to Device for PC Sound card mic, in Windows settings
  8. Because of # 6, Skype caller would hear anything on the mixer, including mic
  9. Because of # 7, Headphones would hear anything on the mixer, including mic


    .... what can I do to not hear myself, but still have the rest?

    Current Theory: Disable Listen to Device when in a skype call.... re-enable when just listening to music
u/kicgaming · 1 pointr/letsplay

Wow, that's super interesting. I understand why you have the sound routed as you do and I didn't realize the limitations of the various recording softwares when combined with screen readers. I gotta say, that makes for an interesting challenge. Man...

Since you have a setup that works and all you really are looking for is to replace the mixer, I'd suggest something like this Yamaha MG10XU board. That one will set you back about $200, and while I don't have any personal experience with it, I like Yamaha stuff. Another I'd suggest, and this one may be even better for you, is the Soundcraft EPM8. Now, this is a little more expensive at $250, but this is a nice mixer, especially at the price point. I had one for a couple of weeks, but ultimately I didn't keep it because it's an analog mixer. Because you're recording directly to SD and don't need the USB connection back to the computer for data transmission, this may be a better choice. I recall it having a nice pre-amp as well.

If you're looking to spend less than either of those, I'd suggest instead of buying a new X, Y, or Z, look at used gear. While I like "new" stuff as much as the next person, often times in the music/audio world you can find quality used gear at good prices. My microphone you'd never know I bought used, and I saved $100 versus buying new.

For a last couple of other options, maybe an Allen & Heath ZED-10 or a Peavey mixer, though I'm having trouble finding a specific one I think might work for you. Just the same, Peavey makes good stuff.

Good luck.

u/yumacaway · 1 pointr/audio

You're asking for a lot of pieces here. How much are you looking to spend? Seems like you're already pretty invested on the amp side.

A mixer like this will set you back $200 but might be overkill.
https://www.amazon.com/dp/B00IBIVL42/ref=cm_sw_r_other_apa_i_S2bLDbAS9B86G

You plug the output to your amp, and then plug in everything you want into the different inputs. You will need some extra cables for your phone. This amp also lets you plug your computer in as an input (so you could play music from there).

Hook everything up right and you'll be able to control the volume of each input (along with a bunch of other stuff) to get the sound coming out like you want it.

Once you get it all sounding right, write another post about your setup and how to record it. That's a whole other matter.

u/Tarvould · 1 pointr/letsplay

We personally use 4 AT2020 and an MGXU Mixer:

https://www.amazon.ca/Technica-AT2020-Cardiod-Condensor-XLRM-type/dp/B0006H92QK/ref=sr_1_1?keywords=at2020&qid=1554514257&s=gateway&sr=8-1

https://www.amazon.ca/Yamaha-MG10XU-10-Input-Stereo-Mixer/dp/B00IBIVL42/ref=sr_1_1?keywords=mg10xu+mixer&qid=1554514302&s=gateway&sr=8-1

As long as you're all facing the same way (NOT even slightly towards each other or you get bad echo) this turns out great.

We even ended up getting a second mixer so we could use the EQ on all four mics. Have a nice carpetted/padded room, and again make sure you're all facing the same direction, a very important lesson we learned. Audio syncing the video is also very much needed in this case.

We record with VERY low gain so there's little noise pollution, then up in post.

u/ANJ___ · 1 pointr/Twitch

that is quite an expensive thing to start with. I'll cut that price tag in half and still show you something way more than I'm sure you will need...


https://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Effects/dp/B00IBIVL42/ref=sr_1_3?hvadid=178358016906&hvdev=c&hvlocphy=9031285&hvnetw=g&hvpos=1t1&hvqmt=e&hvrand=4127858809264975478&hvtargid=kwd-66694691191&keywords=yamaha+mg10xu&qid=1556581041&s=gateway&sr=8-3


I use the Yamaha MG10XU for my stream, it's an amazing mixer for it's price, it has some built in effects you can apply to channels if wanted, supports up to 4 XLR mics and then some. It doesn't necessarily have the Fader sliders you mention, but it has a volume nob which has the same function. So as long as you are cool with twisting as opposed to sliding, BAM.

u/bee_blues · 1 pointr/audiophile

I have a Micca OriGen G2 Amp/Dac that I use alongside a pair of DT990s. My question is how would I go about connecting my amp to a mixer like this Yamaha MG10XU. I know very little about the relationship between mixers and headphone amps

u/TheShoutingSeidhr · 1 pointr/audio

I was looking at the Yamaha MG12XU. Does this work as both Mixer and Audio Interface? Having trouble finding out in my searches.

u/SuperKato1K · 1 pointr/Twitch

I use one of these:

https://www.amazon.com/Yamaha-MG12XU-12-Input-4-Bus-Effects/dp/B00IBIVLKQ/

There's also:

https://www.amazon.com/Mackie-PROFX12V2-12-Channel-Compact-Effects/dp/B00VUU7B7E/

https://www.amazon.com/Alto-Professional-Live-1202-12-Channel/dp/B00HG8WGU6/

Etc.

The biggest difference would probably be a better mic preamp in something with a bit larger $tag. You're still not getting premium preamps or plugs, but they're generally going to be better than what a basic, el-cheapo mixer offers.

u/haganbmj · 1 pointr/smashbros

Here's what I use. Not nearly the best, but it's manageable for the average Joe or group.

Current

  • Streaming: OBS Studio (Win 0.14.x)
  • Overlay: HTML/Javascript w/ StreamControl writing data to JSON and JS polling it.
  • Capture Device: Startech USB3HDCAP + XRGB-mini Framemeister
  • WebCams: 2x Logitech C920
  • Audio Mixer: Mackie Mix 8
  • Headsets: 2x Audio-Technica BPHS1
  • Misc: Powered Composite Splitter, Behringer HA400 Headphone Amp
  • Stream Tools: Nightbot, TwitchAlerts

    Deprecated

  • Capture Device: Dazzle DVC 100

    BPHS1s are kind of the standard for accessible and reasonably priced xlr headsets.

    I was getting decent quality out of my old dazzle before I switched, people just need to learn how to setup their bitrate properly to reduce artifacts and how to deinterlace their capture via amarectv or using the built in obs plugins (I used yadifx4 for the longest time) which do a nice, respectable job. Would I recommend a dazzle? Eh, it produces decent video for the price (got mine on ebay for $20), but has some compatibility issues - if you do a quick search for audio issues with the dazzle you'll find a couple threads. There are workarounds, but it's finicky.

    Ideally though, streams should be capturing component video. It removes the need for software/external hardware deinterlacing. The issue here is that you either need a TV that supports component, or a component->composite converter, which I've seen people have performance issues with in the past.
    My current setup uses a Framemeister to upscale the composite signal and handle the deinterlacing, outputting HDMI to the USB3HDCAP. The advantage is that I get to feed straight composite signals to any plain old CRT, which is great because I've been recording out of a suitcase the last few months while I move around.

    I build my overlays in JavaScript and HTML; there's a layer of logic that polls a local JSON file written by StreamControl for changes and updates them on the page.

    Just taking off on a flight. More info later. (It's later)

    Sample with the Dazzle
u/caryatid23 · 1 pointr/audioengineering

Hello!

Looking for a small mixer ( or maybe something similar ) that has only pan-able channels. For example: However with 4 mono inputs w/ pan as oppossed to 2 mono pan inputs then two stereo balance inputs.

Essentially I'm wanting to route 4+ inputs to 2 outputs where the outputs are to different signal chains not traditional left/right. So channels w/o pan are useless and desk space is at a premium.

Thanks!

u/xxmatkingxx · 1 pointr/podcasts

OK this all makes sense. One concern I have is that right now everyone is using mod mics because it's equipment we already had. The sound is pretty good so I'm happy with them for now. If I grab this Mackie Mix Series Mix8 do I have more spending to do or is this good? Is there cheaper options?

u/tangentandhyperbole · 1 pointr/synthesizers

Behringer has a reputation, like em or not.

Sounds like you don't want to break the bank either, so Mackie is great. Just depends how much you want to spend.

8 channel for $72 Basic but does the job for the price.

12 channel with effects and usb

16 channel w/effects, rack mount, etc

u/JehosTV · 1 pointr/Twitch

I'm using a USB mixer, specifically the Yamaha AG03 which was made for streaming/recording/podcasting: https://www.amazon.com/Yamaha-AG03-3-Channel-Mixer-Interface/dp/B00TY8JE60/

u/PhoKingHapa · 1 pointr/Twitch

I would highly suggest getting a Dynamic mic. I have used a condenser mic in the past, and I had the same issue as you with white noise and it hearing every possible noise in the house. Currently I use the atr 2100 by Audio Technica. I picked it up for $100 and have not regretted it since. It comes with both a usb cable and an xlr cable (if you use a mixer, which i also suggest getting.)
Edit: http://www.amazon.com/Audio-Technica-ATR2100-USB-Cardioid-Dynamic-Microphone/dp/B004QJOZS4

I use a mixer, to mute my mic, for the moments when someone barges in my room or i have my parents yelling at me from outside my door. Its also a great way to change the levels of your mic (for example the highs and lows. I currently use and suggest the Yamaha ag03 as it doesnt take up a huge amount of space and has a perfect amount of space for a single pc stream setup and ive made it work for two pc's. http://www.amazon.com/Yamaha-AG03-3-Channel-Mixer-Interface/dp/B00TY8JE60

Hope this helps and good luck on your search for a new mic!

u/ggfools · 1 pointr/HeadphoneAdvice

> That's the primary reason I got the 2i2 in the first place.
Also, what do you mean by line level?

"line level" is a particular standardized signal voltage/etc that is generally used over 3.5mm/RCA cables for connection between DACS/Amps/etc.

> Seems like just too much equipment overall hahah. Do you have any other ideas for me?

if you are against using software to switch between devices then your options are sort of limited, you could go with a higher end audio interface that should include a more powerful headphone amp, like the Mackie Big Knob Studio Monitor Controller or the JBL ACTIVE-1 the JBL monitor one doesn't have an XLR input, but you could continue to use your 2i2 for your mic.

you could also go with a dac+headphone amp that has a line out like the Fiio E10k then connect the line out to a passive speaker control like the JBL PATCH or Mackie Big Knob Passive then the output from that to your LSR305's with this solution you would also continue to use the 2i2 for your mic input.

you could also consider a USB Mixer, like the Yamaha AG03 but I don't know if the headphone amp in it is great or not.

u/Arrhythmix · 1 pointr/pcmasterrace

This was pretty common on my Z97 board, basically it boiled down to unclean USB power delivery and interference from near by devices from said port. Newer boards like my C7H have much better power delivery and less signal interference on my DAC, and even have specific USB ports for DACs like Gigabytes "DAC up". I got one of these to test my Scarlett 2i2, but was actually an issue with my DAC and ended up picking up a Yamaha AG03. Not to shit on your choice of DACs, but some are made way better than others.

u/beardedmanstudios · 1 pointr/Twitch

As far as a mic. You have a lot of options. You can go with a USB connection. Which is a reasonable option with good quality in products like Blue Yeti or going with a much better studio quality mic like MXL or even Audio-Technica however going with the studio mica I have listed you will need an audio interface. Like the scarlet or Yamaha

u/The_Tocororo · 1 pointr/Twitch

I purchased a cheap Chinese microphone kit Zingyou BM-8000 with a quality Yamaha AG03 Mixer. I can upgrade the microphone for a better one when I get the funds and I have reason to. At the moment, it works well. Other people suggested an Audio Interface, and while those are fine, using Compression and EQ on a microphone is how you make just about any microphone sound good. You will need a separate XLR cable to use that specific microphone kit with a mixer since the only XLR cable it brings is to use with their shitty USB Sound Card. I got VODS on my twitch if you want to take a quick listen to the combination of the two. Gets the job done.

Note: The links are Amazon Affiliate links.

u/Triksterism · 1 pointr/Twitch
u/FRancIK · 1 pointr/BudgetAudiophile

Yamaha AG06 interface/mixer might be what you need. It has XLR for your mic, has extra inputs, where you can connenct the phono preamp, has second input for base and you can add computer audio to your mix / output. And you can record any of that. You can choose between only channels 1 and 2 in mono or the entire input mix.

https://www.amazon.com/Yamaha-AG06-6-Channel-Mixer-Microphone/dp/B00TY8JFSC?th=1

​

And then maybe Kali audio LP-6s? These two things round exactly to 500 dollars.


https://www.amazon.com/Kali-Audio-LP-6-Studio-Monitor/dp/B07NWBSJ11/ref=sr_1_2?crid=2LOJSNOX3V2E6&keywords=kali+audio+lp-6&qid=1562636566&s=gateway&sprefix=kali+audio%2Caps%2C230&sr=8-2

u/MazcuHS · 1 pointr/battlestations

> Asus MG279Q 27" 1440p 144Hz IPS https://www.amazon.com/27-inch-FreeSync-Response-DisplayPort-MG279Q/dp/B00ZOO348C/ref=sr_1_1?keywords=Asus+MG279Q&qid=1568889772&s=gateway&sr=8-1
Dell P4317Q 43" 60Hz 4K IPS https://www.amazon.com/Dell-P4317Q-42-5-16-Microfiber/dp/B07RBBQBR6/ref=sr_1_2?keywords=Dell+P4317Q&qid=1568889797&s=gateway&sr=8-2
NZXT S340 Elite Black/Blue (can't find on amazon anymore. this would be the follower https://www.amazon.com/Nzxt-H510-Elite-Dual-Tempered-Water-Cooling/dp/B07C3SQPBB/ref=sr_1_1?keywords=nzxt%2Bh510%2Belite&qid=1568889894&s=gateway&sr=8-1&th=1 )
Asus ROG STRIX B350-F Gaming https://www.amazon.com/ROG-B350-F-GAMING-DisplayPort-Motherboard/dp/B071SGQP1Q/ref=sr_1_4?keywords=Asus+ROG+STRIX+B350-F+Gaming&qid=1568889978&s=gateway&sr=8-4
Ryzen R7 1700 @3.8GHz https://www.amazon.com/AMD-Processor-Wraith-Cooler-YD1700BBAEBOX/dp/B06WP5YCX6/ref=sr_1_2?keywords=Ryzen+R7+1700&qid=1568889999&s=gateway&sr=8-2
MSI GeForce RTX 2080 DUKE 8G OC https://www.amazon.com/MSI-RTX-2080-DUKE-8G/dp/B07GHXMMYF/ref=sr_1_1?keywords=MSI+GeForce+RTX+2080+DUKE+8G&qid=1568890061&s=gateway&sr=8-1
Corsair Vengeance LPX 2x8GB 3000MHz CL15 https://www.amazon.com/Corsair-Vengeance-3000MHz-Desktop-Memory/dp/B0134EW7G8/ref=sr_1_1?keywords=Corsair+Vengeance+LPX+2x8GB+3000MHz+CL15&qid=1568890088&s=gateway&sr=8-1
Seasonic Focus Plus Gold 450W https://www.amazon.com/Seasonic-SSR-450FM-Semi-Modular-Warranty-Compact/dp/B0778XB7CK/ref=sr_1_2?keywords=Seasonic+Focus+Plus+Gold+450W&qid=1568890111&s=gateway&sr=8-2
Deepcool Captain 240mm White https://www.amazon.com/DeepCool-Captain-240EX-RGB-Liquid/dp/B076ZPCGYH/ref=sr_1_1?keywords=Deepcool+Captain+240mm+White&qid=1568890122&s=gateway&sr=8-1
Kingston KC1000 1TB https://www.amazon.com/Kingston-Digital-KC1000-SKC1000-960G/dp/B072ZKXL8K/ref=sr_1_3?keywords=Kingston+KC1000&qid=1568890140&s=gateway&sr=8-3
Crucial MX500 500GB https://www.amazon.com/Crucial-MX500-500GB-NAND-Internal/dp/B0786QNS9B/ref=sr_1_1?keywords=Crucial+MX500+512GB&qid=1568890157&s=gateway&sr=8-1
WD Caviar Green 1TB https://www.amazon.com/Digital-INTELLISTORE-Deskptop-1Terabyte-SATA2-SATA3/dp/B06XR3DDCB/ref=sr_1_2?keywords=WD+Caviar+Green+1TB+7200&qid=1568890187&s=gateway&sr=8-2
Fostex TR-90 https://www.amazon.com/Fostex-TR-90-80-Semi-Open-Stereo-Headphones/dp/B079L9ZC6Y/ref=sr_1_5?keywords=Fostex+TR-90&qid=1568890219&s=gateway&sr=8-5
Steelseries Rival 600 https://www.amazon.com/SteelSeries-Rival-600-Gaming-Mouse/dp/B078LJ6RPK/ref=sxin_2_ac_d_rm?ac_md=0-0-c3RlZWxzZXJpZXMgcml2YWwgNjAw-ac_d_rm&keywords=Steelseries+Rival+600&pd_rd_i=B078LJ6RPK&pd_rd_r=7a919f32-0b30-4130-9085-a40d0767f6b2&pd_rd_w=X4QOW&pd_rd_wg=HVxsQ&pf_rd_p=d29bc9bc-49e2-46b8-bc05-387917c341ec&pf_rd_r=G61EGBMPSP2D2K7BTSVZ&qid=1568890240&s=gateway
QPAD FX90 (not on Amazon)
Ducky One TKL RGB Cherry MX Blue (Didn't fint the exact model. It's like this, but with RGB) https://www.amazon.de/Ducky-Backlit-Gaming-Tastatur-MX-Blue/dp/B078YHST8S/ref=sr_1_12?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&keywords=ducky+one+tkl&qid=1568890765&s=gateway&sr=8-12
Microsoft LifeCam Studio https://www.amazon.com/Microsoft-LifeCam-Studio-1080p-Webcam/dp/B0042X8NT6/ref=sr_1_1?keywords=Microsoft+LifeCam+Studio&qid=1568890851&s=gateway&sr=8-1
Yamaha AG06 https://www.amazon.com/Yamaha-AG06-6-Channel-Mixer-Microphone/dp/B00TY8JFSC/ref=sr_1_1?keywords=Yamaha%2BAG06&qid=1568890863&s=gateway&sr=8-1&th=1
2x Genelec M030 https://www.amazon.com/Genelec-M030-Active-2-Way-Monitor/dp/B00CC36584/ref=sr_1_1?keywords=Genelec+M030&qid=1568890884&s=gateway&sr=8-1
AudioTechnica AT2020USB+ https://www.amazon.com/Audio-Technica-AT2020USB-Cardioid-Condenser-Microphone/dp/B00B5ZX9FM/ref=sr_1_4?keywords=AudioTechnica+AT2020USB%2B&qid=1568890898&s=gateway&sr=8-4
TEAC TN-300 https://www.amazon.com/TN-300-Analog-Turntable-Pre-amplifier-Digital/dp/B00P9W6SUK/ref=sr_1_4?keywords=TEAC+TN-300&qid=1568890911&s=gateway&sr=8-4
Skagen Falster 2 https://www.amazon.com/dp/B07H9FC6D3/ref=twister_B07TYFM5JV?_encoding=UTF8&th=1
Maxnomic Office Comfort Quadceptor OFC Brilliant Blue (a bit different stiching) https://www.amazon.com/MAXNOMIC-ERGOCEPTOR-Office-Slightly-Silver/dp/B07PQT4LD4/ref=sr_1_1?keywords=Maxnomic%2BOffice%2BComfort&qid=1568890959&s=gateway&sr=8-1&th=1

u/Llohr · 1 pointr/nvidia

I don't think I fully understood that you have an HDMI cable running from your GPU to your receiver and that's what you're using for Audio. That isn't something I've ever considered. Even with a good GPU that's sort of asking for interference.

It is possible that all of your interference is being picked up in the GPU, in which case you'd be much better off with an external DAC of some sort. Some motherboards have dedicated low-noise DAC USB ports, but even if not, digital signals don't pick up noise in the same way.

You can run your receiver off of a DAC with a balanced line and then possibly mitigate further issues with better-shielded cables.

Personally, I run a pair of LSR308s off of one of these in stereo and I've never heard anything so amazing in my life. I also have them right-side-up. I've heard a few say they sound a lot worse upside-down as you have them.

I switched to that off-board DAC because I was tired of getting interference from the on-board soundcard, even if it was just the occasional click or whine.

u/theograd · 1 pointr/audio
u/flatmax · 1 pointr/raspberry_pi

Yes - so what we are saying is that you can mod the connector or use a mono to stereo converter - or just use as is and one of the channels out/in will be shorted to ground which shouldn't pose a huge problem, however it would require testing to see what actually happens - hopefully it doesn't introduce noise.

Also as long as your guitar outputs enough voltage you can use this item as is - if you need extra volume, then perhaps you will need to get a mono preamp ???

You can use this type of preamp to go from mono to stereo with gain (only if necessary) : https://www.amazon.com/dp/B00UIP0IPO

u/EntropyOrSloth · 1 pointr/audiophile

I'm looking for an audiophile-quality audio mixer with USB input(s) also, and a minimum of 3 channels. I've been looking at the Behringer XR12. Are there any other makes/models I should be taking a look at, besides the XR12?

u/iProbablyUpvoted · 1 pointr/podcasting

I started looking around a bit more at Automix and found the XR12. Could I pair that with a couple 3-packs of XM1800S along with appropriate cables and perhaps some desktop (conference table) stands?

The XR12 claims to be able to do "Revolutionary Dugan*-style Auto-Mixing automatically manages microphone gain sharing"

u/UnmannedVehicle · 1 pointr/ProAudiovisual

Is this the Behringer one you're talking about? Is $250 what I can expect to pay for something like that or does it go any lower?

I guess what I'm looking for then is just a "digital mixer" with enough XLR inputs to accept however many mics I need.

Yeah, wireless definitely not required for the panel but it's much more convenient that way.

u/mahchefai · 1 pointr/audio
u/natethomas · 1 pointr/hometheater

I've been sitting here for a few minutes now considering this, and I genuinely don't know what the best way to do this is.

​

First thought: You'd need to build a full HTPC with a pretty good video card to drive 5 TVs. That seems pretty expensive. Probably min $600-800. So let's go to idea 2.

​

Second thought: Streaming sticks. In theory, with enough streaming services and and HDHomeRun, you could handle this really easily... except depending on your wifi you may start saturating things pretty quickly.

​

Third idea: Raspberry Pis. As long as you are only using HDHomeRun and PSVue, you could run Kodi on all those Pis, plug each one into a gigabit switch, and everything would work great. If you are depending on services not available in Kodi though, this wouldn't work.

​

Fourth idea: Cheap wintel boxes! https://www.amazon.com/ACEPC-T8-x5-Z8350-Graphics-Computer/dp/B07D9YX3W6?keywords=windows+stick+ethernet&qid=1540840765&sr=8-18&ref=sr_1_18 Each one of these is about $100 and already comes with Windows and can theoretically play 4k content. They also have ethernet. Plug them all into a gigabit switch. Install Synergy (a mouse and keyboard sharing program) on all the devices, so a single mouse can control them all. Profit.

​

You can also accomplish the same thing with Fire TV Cubes (current version with ethernet). Except there you'll need 5 different remotes. It's also slightly more expensive. https://www.amazon.com/Fire-TV-Cube-hands-free-with-Alexa-and-4K-Ultra-HD-and-All-New-Alexa-Voice-Remote/dp/B0791T9CV7?keywords=fire+tv&qid=1540841484&sr=8-5&ref=sr_1_5

​

Each of these ways would probably be pretty fun and impressive for friends.

​

Edit: Just saw the goal of being able to also stream audio to a receiver. No problem. Grab the audio out from either the TV or device depending on what you are using. Pull it all into a 5 channel mixer. Send that to your receiver. For e.g. https://www.amazon.com/dp/B01M68UK38/ref=sspa_dk_detail_2?psc=1&pd_rd_i=B01M68UK38&pf_rd_m=ATVPDKIKX0DER&pf_rd_p=f52e26da-1287-4616-824b-efc564ff75a4&pf_rd_r=YMRFG6VP060T8G9TPEZT&pd_rd_wg=o8OkC&pf_rd_s=desktop-dp-sims&pf_rd_t=40701&pd_rd_w=VothI&pf_rd_i=desktop-dp-sims&pd_rd_r=f5532ae8-dbb2-11e8-9a6a-33a8eee8b3d9

​

At this point, you could probably start charging for beer and popcorn.

u/upleverdown · 1 pointr/volcas

From another newbie, I spent a lot of time weighing strengths and weaknesses of different mixers for the volcas and wound up getting this and I'm really happy with it:

https://www.amazon.com/Maker-Hart-LOOP-MIXER-Portable/dp/B01M68UK38/ref=sr_1_2?ie=UTF8&qid=1543002133&sr=8-2&keywords=loop+mixer+maker+hart

Can do mono and stereo, has a headphone output, cheap, already has all 1/8" jacks so no adapters needed.

u/StriveForMediocrity · 1 pointr/volcas

I think the general consensus of budget mixers with included FX is that they're not very good. I don't have firsthand experience with the 1202fx, but I'd rather handle the fx separately anyway as I have a lot of pedals. If you want fx, consider looking at one of the Zoom multifx pedals as they're pretty cheap but offer a lot of freedom in what you can do with them.

I have a Dude. I like it and use it with my portable stuff, but if you weren't aware, it's mono only and powered. I were to get another smaller mixer I'd probably go with the Maker Hart Loop Mixer. 5 stereo inputs with a lot more options, and you can stack multiple mixers together should you need more room.

https://www.amazon.com/dp/B01M68UK38/?coliid=I2O0YX9QG0HL2U

u/I_Am_The_Shazbot · 1 pointr/headphones

So I currently use a pair of headphones plugged into a FIIO ALPEN 2-E17K usb amp. I have been using a stereo splitter to plug in multiple sources (PS4,Wiiu,3DS) to my line in port, but the sound is too low for some of them and there is constant hissing. What do I need to be able to have all of those consoles audio come into my PC and into my headphones through my amp? Something like this? https://www.amazon.com/LOOP-MIXER-Portable-Channels-Stereo/dp/B01M68UK38/ref=sr_1_7?s=musical-instruments&ie=UTF8&qid=1500284081&sr=1-7&keywords=stereo+mixer

u/eldorel · 1 pointr/diyaudio

I misunderstood you slightly, so the one I posted goes the other way, (2 inputs > 1 output) but a mic mixer is the same general price range.

I would go with this one:

https://www.amazon.com/Maker-Hart-LOOP-MIXER-Portable/dp/B01M68UK38

It's a little more expensive, but can handle more inputs and has 3 separate output channels. (so PC + tablet, plus you can connect headphones for monitoring what the mic sounds like.)

u/TheTim · 1 pointr/podcasting

I currently use the Zoom H5 with the EXH-6 Dual XLR/TRS Capsule, which supports up to 4 channels. My dream upgrade is the Zoom LiveTrak L-12, which has 8 XLR inputs and two stereo inputs. It's $600 on Amazon but regularly goes down to $500.

u/reoll · 1 pointr/gadgets

I meant a situation like this, with the headphones plugged into another jack in my laptop. I have a few 1/4" to 1/8" adapters laying around, but I was hoping I wouldn't have to buy one for all of my devices. I'll look a bit more at the preamplifiers, but I was just hoping there was something out there that fit my situation a little more closely. Thanks for your help.

Edit: I'm thinking I'll go with something like this.

u/jonwilkir · 1 pointr/audio
u/Empole · 1 pointr/audiophile

I was wondering if anyone know of any reasonable priced stereo 1/4 inch mixers.

This mixer from Behringer would've been perfect for me in terms of size and price, but it outputs in MONO, and I was looking to get something that outputs in stereo.

The closest thing to what I want was this mixer. The only thing was that it's kind of expensive, so I was hoping that someone had a recommendation that was a bit cheaper.

Or alternatively, if someone has a suggestion for something else that can let me combine a bunch of input into one stereo output, i'm all ears.

u/AceRockola · 0 pointsr/podcasts

You might want to look into the Behringer Xenyx 802. Behringer makes a solid product, I used one of their mixers before upgrading to my Presonus.

Although I'd recommend getting some XLR mics instead of USB. Maybe the MXL990, not a bad mic for the price.

Behringer Xenyx 802

u/justkevinmanley · 0 pointsr/podcasting

What you need is a board
BEHRINGER XENYX 1202 https://www.amazon.com/dp/B000J5Y282/ref=cm_sw_r_cp_api_KgURAbGQA217A

3 mics

Monoprice Large Diaphragm Condenser Microphone - (600800) https://www.amazon.com/dp/B00AJHBVMU/ref=cm_sw_r_cp_api_yhURAb1K08J02



3 mic arms


Neewer NW-35 Metal Suspension Boom Scissor Arm Stand with Built-in XLR Male to Female Cable, Shock Mount and Table Mounting Clamp (Black) https://www.amazon.com/dp/B00AK7SKL4/ref=cm_sw_r_cp_api_.hURAb4CEZSSE

Some kind of pop filter too.


It’s a little more than what your budget was but this is all really cheap gear and you won’t need any sound proofing and your audio will be clean once you get settings all set up. I strongly recommend this as a starter build. I’ve been using a similar setup for years.


u/slujj-vohaul · 0 pointsr/synthesizers

Also available sans FX if you aren't interested in them. I'm probably picking one up myself soon.

u/PanicGamer_and_Simon · 0 pointsr/Twitch

Do one stop shopping and get yourself the Yamaha MG10XU. Pound for pound I don't know anything that delivers better in it's price range. It's easy to set up and gives you a wealth of options.

​

https://www.amazon.com/Yamaha-MG10XU-10-Input-Stereo-Effects/dp/B00IBIVL42/ref=sr_1_2?keywords=yahama+mixer&qid=1556628901&s=gateway&sr=8-2

u/SeaBroom · 0 pointsr/audiophile

Oh wise audiophiles,

Forgive me in advance for any ignorance, this is going to be my entry-level purchase into the hifi world. This is not necessarily a 'puchasing advice' inquiry, but more of a knowledge inquiry on what I need to power my setup. I'm looking at buying KRK Rokit 5 G3s and the Beyerdynamic DT770 250 ohms purely for near-field music listening (no producing, mixing, DJing, etc.) at my PC. I was recently gifted the Xonar DX 7.1 PCI sound card for my rig which I believe is a sufficient DAC for Rokit 5s (correct me if I'm wrong), but I'm unsure if I'm losing some quality by hooking my monitors in with an unbalanced line via an XLR or 1/4" TRS to 1/8" TRS. Further to that, the Xonar DX does not split to mono inputs so I would need an adapter to plugin directly to my soundcard. I do enjoy having an external interface to control my sound devices and a friend suggested I buy a mixer such as the Behringer XNYEX502 as another possibility.

First question: is it worth buying an external DAC/mixer for my Rokit 5s compared to using only a Xonar DX soundcard?

I also understand that they DT770s need an amplifier to be properly used. The recommendations I've researched typically consist of the fiio portable headphone amplifier series or the O2/ODAC JDS Labs combo. I do not need a portable amplifier as these headphones will live at my station and I have separate headphones for portability. The O2/ODAC combo sounds like a great piece of hardware, but at $279, they greatly exceed the price of my DT770s.

Second question: Are there other solutions that I can look into that aren't portable or expensive?

If the O2/ODAC combo is recommended and is worth the price in combination with the DT770s, then I'm perfectly fine making the purchase. Just want to be sure it's not overkill.

Now for the (longshot) third question: Since I'm potentially looking into both a DAC and a headphone amplifier, is there a piece of hardware that can satisfy both in one tool? Seems like I could find a way of mitigating the cost by purchasing a device that could be both a DAC/mixer for my Rokit 5s and a headphone amplifier for my DT770s. If not, is there a stack I could purchase that have similar designs that would look aesthetically pleasing on my station (I'm a fan of clean looking and matching hardware)?

Again, sorry for any groans I may have caused and thank you in advance for your expertise.

u/calinet6 · -1 pointsr/audio

Your best bet is probably a really long mono 1/4" cable run of 50 feet (shouldn't be too terribly long for the laptop to power without interference, since "sound quality does not have to be perfect" as you say) with a 1/4" to 3.5mm adapter on one end.

Alternatively you could get a smaller 3.5mm headphone extension cord from RadioShack or Monoprice (the latter being preferred, with RadioShack as always being for time-sensitive emergencies only). Then put a 3.5mm to 1/4" adapter on the end of that to plug the speaker into.

Basically, any way you can adapt those jacks to fit the cables should get a signal across for one channel. All you need is two conductors and the right connections.

Then you should just figure out if your soundcard or OS or audio player has the option to "mix down" the stereo to a single channel (mono), or figure out how to put whatever audio you want to play in a single channel. I believe a stereo-to-mono adapter will take everything from the Left channel, so use that if possible.

If that doesn't work, or if it's important to have the data for both channels accurate, you could get a Mixer like the Behringer 502 for super cheap, and plug the stereo laptop into that using a 3.5mm to 2x 1/4" Y cable such as this.

Should work if you just connect it :)

u/rosskw · -1 pointsr/podcasts

It's an awesome deal, I got one last year. There are a few more awesome podcaster deals here:
https://www.podcastinsights.com/amazon-prime-day/

The Yamaha AG06 Mixer seems to be the only decent mixer for podcasting - but the shipping time is a little long now.