Best surface scouring pads according to redditors
We found 176 Reddit comments discussing the best surface scouring pads. We ranked the 55 resulting products by number of redditors who mentioned them. Here are the top 20.
We found 176 Reddit comments discussing the best surface scouring pads. We ranked the 55 resulting products by number of redditors who mentioned them. Here are the top 20.
It's called melamine foam, and is also used in soundproofing rooms. You can buy the off brand stuff for WAAAY cheaper than Mr clean. Here's 100 of them for 10 bucks with free shipping. Mr clean wants like 8 bucks for 4 of them.
I have one small nonstick pan that I use only for eggs. I hand wash it and generally treat it like spun glass.
I keep my stainless steel clean in several ways. First, get in the habit of de-glazing the pan and making a tasty sauce for whatever you cooked. Second, soak the pan. Fill it with hot water and let it sit until the water cools. If that's not enough to loosen everything, then use a scouring powder like Bar Keeper's Friend or Bon Ami, along with one of these.
For really burnt on stuff, especially stuff that had a high sugar content such as barbecue sauce, try adding some white vinegar to the hot water when you soak the pan.
This Pumice Stone is what I use. It won’t scratch the porcelain.
Pumie Scouring Stick (4PK) https://www.amazon.com/dp/B00N3EI34U/ref=cm_sw_r_cp_api_i_3IgXDbEDK9Q45
"Magic erasers" are your enemy, "Melamine sponges" are your friend.
They're exactly the same thing, but it costs 20x less if you you don't buy the brand name.
More line than you think you need. Double the line. You can never have enough line.
Waterproof, powerful flashlight my recommendation
Plastic bag with a lanyard for valuables/wallets/phones/licenses. Alternatively, a pelican case.
A pair of vice grip pliers ("The wrong tool to get every job done right")
A knife, as others said. I work professionally on the water as well as boating recreationally. The Myerchin Rigging Knife is the best all purpose knife to have on board. It might be a little overkill, but when you need a line cut fifteen seconds ago, you'll be glad you have it.
A VHF handheld radio and a knowledge of what channels are monitored by the USCG (13, 16, 22A), Commercial traffic (13/16) and local police/fire departments
Spare fuses, bulbs, plugs
A Towboat US membership
A bigger, heavier anchor if you're anywhere with a decent amount of current (rivers, oceans). I'm very much a proponent of overkill when it comes to anchoring. I use an anchor way bigger than my 20' pontoon needs, and it's a tad pricey, but once I drop it and pay out the scope, I rarely worry about dragging.
Bag of cleaning supplies. Rags, paper towels, and the holy trinity of vinyl care: melamine pads, CLR Mold & Mildew, and 303 protectant
Most important item of all: A bleach bottle with the bottom cut off
This one?
Same thing. All a Magic Eraser is is a melamine sponge, and one has a significant name brand upcharge. I have a bag of 100 of them in my closet I got for $6.63 or so. Arrived via the slow boat but they are perfect.
Edit: The ones I got are $8.99 now. http://www.amazon.com/gp/product/B00XC32NMK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Still a good price on 100.
>which you can find dirt dirt DIRT cheap online.
Wow you weren't kidding, $9 for 100, holy shit
Just found this 100 pack for $8.99.
And the customer questions are pretty great too.
you can get a pack of 100 for $8
Here is an alternative, and what I have been using for the last few hiking seasons... Stainless Steel Scrubbing Scouring Pads. They weigh pretty much nothing, can deal with just about anything inside of your pot/cup, and if there is moisture inside your pot/cup it will not matter as they are totally resistant to being wet all day, in between meals. They will not damage any of the aluminium, stainless steel, and/or titanium pots/cups that we all use. I even use one inside of my MSR Ceramic Solo Pot, which normally you would think would be a huge no-no, but so far it has caused zero damage to the ceramic lining. I cut my scrubber in half, as they are rather large. They last a freaking long time (easily get an entire hiking season out of one of them), and you do not have to worry about nasties building up inside of them like those sponge scrubbers, or worse, a bandana, and if you really feel like getting one of these clean, you can just toss it into your pot/cup with some boiling water, without any worry. It really has become the ideal cleaning method/device for me. Give one of them a try!
What kind of steel wool did you use? I've had good luck with these.
next step: a teaspoon of dishwasher detergent and boiling water.
Ultimate clean: put it your oven and run the self-clean cycle.
you can indeed https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK/ref=sr_1_3_a_it?ie=UTF8&qid=1466915830&sr=8-3&keywords=Melamine+foam
I don't know if you know this, but Mr Clean magic erasers are literally just melamine foam sponges. There's absolutely nothing special about them besides the Mr. Clean brand name. They are in no way different than any other melamine foam sponge on the market.
Here is a pack of 50 "magic erasers" for $12.
I'll page in OP u/eveningsnow because when I learned magic erasers are just melamine sponges with enormously hijacked prices, it was life changing, and since y'all use them WAY more than I do, I hope this helps a bunch!
Get these They are the same thing as magic erasers except they aren't crazy expensive.
Try a magic eraser. It just wipes away any brown build-up. I tear a bit off and use use tweezers/needlenosed pliers to scrub it inside for like 5 seconds and it's as good as new.
I cook primarily on cast iron. Here are some things I've learned:
Additional tips:
-Don't be too concerned about aesthetics. These pans can take a beating. The inside/outside will become discolored with heavy use.
-Cast iron pans are a healthy choice. They are a great way to increase your iron intake, something you don't get with enameled cast iron. To be honest, well seasoned cast iron, although less nonstick than Teflon cancer pans, is more nonstick than enameled cast iron. The pans impart a bit of iron to your food when you cook in them. Low iron makes you sleepy, and if you consume a lot of dairy, it blocks iron absorption. Vitamin C increases iron absorption.
-Learn to cook properly with these pans to get the most out of them. Use fat, don't be afraid of it, you don't consume most of the fat that you cook your food in.
-Coconut oil is a great healthy option and can be bought for cheap at Sam's/Costco/BJ's, Also look for any ethnic grocer that sells Swad brand products, their coconut oil is bomb and quite cheap.
-Don't use olive oil. It can be oxidized to a trans fat at high heat (only unsaturated fats can do this, trans fats are the only fats scientifically linked to heart disease).
-Preheat the pan! If it isn't sizzling when you drop it in, it WILL stick. Don't try to flip things too early, it will also stick, you want a nice crust to form.
Best of luck!
Silk Roses and Chore Boy are not age restricted. Anyone can buy it. Dipshit
Also, after you soak it with vinegar and water (I do half and half, and soak for half an hour), take a non-scratch scouring pad and scrub it out. That gets it really clean.
That's what I usually do anyway.
I brought a small scrubby. Like this (except only brought half of one, not 20).
Try the Magic Eraser. It got permanent marker out of our countertop and off the wall of our kitchen. It will seriously get anything out of anything. You can get them at Target/Walmart/Grocery stores too.
https://www.amazon.com/gp/aw/d/B002CQTXBC/ref=mp_s_a_1_3?ie=UTF8&qid=1497305129&sr=8-3&pi=AC_SX236_SY340_FMwebp_QL65&keywords=metal+scrub+pad&dpPl=1&dpID=41h3cypvWmL&ref=plSrch
These will also take it right off.
Dude, yes. If it's anything like the rubbery white caps on my converse, Magic Eraser (and honestly, the cheap knock off's too) works a charm!
You can buy 200 generic brand magic erasers for $20. https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00EZGIUX4?th=1&psc=1
pro tip: get a magic eraser or 100 generic ones for the same price for the coffee stain. also stop pouring coffee down your walls
So first off, always test for lead on any pan you don't know where it's been. But that has to be done while the pan is stripped. You can't tell if it's lead without the test.
Burning off on a grill can lead to warping. Just use oven cleaner or a lye bath.
Use stainless steel wool, not steel wool. Steel wool can leave particles behind that prevents adhesion of seasoning via rapid corrosion.
The dark spots are some sort of light pitting. A lot of pans have these stains. The only real way to get rid of them is electrolysis, and even then I have pans with shadows on them. The good news is that the dark spots will disappear with seasoning and the rough patch will eventually, with use, fill in with seasoning.
Nice little pan, btw!
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Buy these instead
> have it shipped relatively fast?
https://smile.amazon.com/dp/B007EUSKNI/ref=dp_cerb_2
One day shipping with Prime.
Just an FYI-Mr. Clean Magic Erasers are just a fancy name for melamine sponges...just buy these and save a ton!!
I've found that magic erasers (example) are pretty good for removing paint transfer. Wet them and squeeze off excess water, then scrub the marks fairly vigorously (here's a video example if you want), and that should do it.
Mister Clean Magic Erasers might work. Or just the generic https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Just be sure to go easy on the area around the ring or you'll take the paint off.
>1) I was just a dumbass for using the scouring pad
Possibly?! Was it like This Or more like This ?
I've never had anything stick so bad that a little hot water and one of These couldn't get it off easily.
-------------
>2) I was seasoning them with too-thin coats of oil
Not likely, you want it wiped down almost dry, you sound like you did good here.
-------------
>3) The quality of my seasoning was somehow marred by tiny bits of rust I couldn't see
Tiny invisible rust won't hurt. But oiling over a raw pan that's not 100% dry and then baking, can cause issues with the seasoning sticking.
-------------
For a long time this Flax seed oil method has been praised as being the end all and be all of seasoning cast iron. More and more lately I've been hearing stories like yours. There's got to be something to it. Either people are doing it wrong, or it's not really as good as people say. All I can say is that people seasoned pans without issue for the last 100+ years using whatever kind of grease they had on hand, and it worked just fine.
I've had pretty good luck with Olive Oil (Even though others may disagree). I've since moved on to using Sunflower oil and like it very much. I use only metal utensils, and only scrub with the pads I linked above and have never had the issue of seasoning flaking off.
Edit
Here's a few links with other people having problems with their Flax seasoning. Maybe you can glean some info from them.
My Flax seed problem.
"It worked nice. I was happy. But it didn't last."
"I like using olive oil better because olive oil in thin layers do not flake off like flaxseed for me"
After 8 coats, the surface looked great, the eggs slide off nicely and I thought we were golden. Then...the seasoning started to wear/cook off quickly.
If you like them here's the next tip. Just buy Melamine sponges in bulk.
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
THIS.
Magic Erasers are gods gift to sneaker heads everywhere.
Also, don't buy name brand Magic Erasers.
Generic Melamine board can be purchased wayyyyyyyyyyyyyyyyyy cheaper.
Amazon has 100pcs for <$7. The name brand ones don't break down as fast, but at this price point, you could use them once and throw them away and still spend less than the name brand ones.
Melamine sponges have a very fine abrasive quality which is perfect for this application. Mr. Clean Magic Erasers are just melamine sponges impregnated with a detergent.
Just a generic melamine sponge with rubbing alcohol should work really well.
Better yet, buy them in bulk on amazon Baoer 100Pcs/lot Eraser Magic Melamine Cleaning Sponge 10x6x2CM https://www.amazon.com/dp/B00XC32NMK/ref=cm_sw_r_cp_apap_V3TOXYIeXJSw1 they are way cheaper
Baoer 100Pcs/lot Eraser Magic Melamine Cleaning Sponge 10x6x2CM https://www.amazon.com/dp/B00XC32NMK/ref=cm_sw_r_cp_apa_qKELBb8FNBGZG
By naturally, do you mean without using chemicals?
If so, use a pumice stone. There are a few on the market, I get mine from Amazon or Home Depot. You just get it wet and scrub the stains and scale off. If you don’t like the sound of nails on a chalkboard, you won’t like this method. Otherwise, it’s very effective and uses no chemicals.
One additional note, BKF works great with one of these:
Scotch-Brite No Scratch Scour Pads
https://www.amazon.ca/100Pcs-CLEANER-MELAMINE-CLEANING-10x6x2CM/dp/B00XC32NMK
Generic version for you.
I tried one of those on a really dirty tub once, and it did not work well at all. It did look a fair bit cheaper than the one you linked. But what worked the absolute best was one of those stainless steel scrubby things.
Canti's take a lot of nuance to set up well; it took me several years before I got it down. I don't know if I can convey all of my tricks well in text but I'll try.
The first thing is it's all about angles. The height of the yoke, and the angle of the caliper arms in their resting position are good indicators. You want to start by getting the yoke in the right position. Shimano's "yokes" are called "link wires" I guess... according to Sheldon Brown... I always try to use these as I find them easier to work with. There's usually a line indicator to help you set them up, basically you want that "link wire" to be about a 90 degree angle when the brake is resting. When it's set up right, the caliper arms will be close to parallel when resting. You definitely don't want the tops of the arms pointing in, but you also don't want them pointing too far out.
&#x200B;
After that I use a toe strap or something similar to hold the brake lever in a slightly pulled position. Depends on the length of lever and how it all feels but I usually do it 2 finger widths from the bar, sometimes 3. You're setting the "bite point" of the brake, aka the moment in the lever pull when the pads first contact the rim. With the toe strap holding the brakes at this position, I then install/adjust my pads. I put them up square against the rim. This works best with pads like Kool Stops Eagle 2's that have a little bit of built in toeing (the backs kind of angle out like a "claw") but honestly I've found it works ok with normal pads like Shimano's too. A lot of people will probably protest me here and say you need to toe them some. You certainly can, I just find I don't have to often. Why? I always, always, always clean a dirty rim. I use the "purple stuff", which seems to be called aluminum oxide scotch brite. The last shop I worked at used it all the time so I always try to keep some at my bench now. Clean up rims with it, sand the pads down a little, and a lot of your brake squeal problems will go away.
&#x200B;
Like everything it just takes time and familiarity. I also "cheat" by using large channel lock pliers to adjust the angle of the whole pad if it just needs a slight adjustment, instead of loosening and re-tightening the hardware.
Thank you for mentioning that you can't mix these chemicals!
I think it's my shampoo and conditioner- I get buildup in my tub really fast.
While it has never looked like this (ew. Just... ew.) I use fill and soak with bleach method as well. I find the smell to be less abrasive than Comet, which is the next best thing for removing soap scum, in my opinion.
I don't use other chemicals in that same day, though. I fill the tub with hot water (if you have a crappy hot water tank, think of maybe adding some water you boil on the stove) and add a few cups of bleach. Let that sit for about an hour or so- no less than 30 minutes. Then get a pair of gloves and a dish sponge like this and start to work on the sides- dip the sponge into the bleach water, scrub over the area, repeat.
For a job this big... you might need to do this a couple times.
Which is still really cost inefficient, amazon sells them for $14.65 for two hundred.
no.
well, there might be pumice stones made for heavy duty use like grills or whatever but i'm talking about this one
I haven't done one myself. But if you don't want to ruin the default shell, BASSTOP and some other companies on Amazon sell after market shells.
First you need to take a scour pad to the surface you want to paint. Rinse it off and make sure its clean and dry before painting.
Use a spray primer before painting. I would recommend a matte black or white. The use spray or acrylic paints to get your desired colors/effects/designs.
Then use a spray clear coat to seal it.
I'd look up plastic painting tutorials, a lot of the same practices can be used to achieve different results with controller shells.
I'm about to blow your mind:
Mr Clean doesn't have a patent on magic erasers. They are called melamine sponges. You can buy a pack of 100 for less than $10.
Seriously.
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
I have become a melamine sponge whore. And I am ashamed.
The added bonus: I think that the magic eraser branded ones tend to have a scent on them. The generic ones I linked to don't.
https://www.amazon.com/Mr-Clean-Eraser-Kitchen-Scrubber/dp/B007EUSKNI
If that can't get it out then the color seeped into the rubber.
Yeah, I had this happen to me with a smaller piece. The kitchen at my job was using these to scrub their fry baskets, and the metal got stuck in the space where two wires met. When put back into the fryer, the metal expanded, let the strip go, and it attched to my chicken cutlet.
If you're wondering, there's rumors all over the internet that magic erasers are just these
And I guess they're also bad for the environment. But I don't care. Just wanted to share this info in case you like those sponges and you want to get them cheaper.
This pack was available for $4.69, but appears to have gone out of stock since the last time I linked it 16 days ago. Sorry :(
Edit: Closest I can find now is this pack, 100 for $6. But free shipping.
Just as an FYI, those erasers are made of melamine, you can buy the stuff on amazon for cheap. Melamine works so well because its a very abrasive material at a microscopic level.
Don't buy anymore magic erasers. Check these out
Go to home depot or lowes and buy a pack of these. They are around $2.50 for a pack of 3.
Sanitize 1. While you're doing that remove the liquid post and clear/re-sanitize it. When you put it back in, before pushing it all the way down use SS tongs or something to let you push the end of the dip tube into the middle of the pad. Push the dip tube all the way down and reattach post.
Problem solved for less than $1.
I use to use these but they fell apart after 5-10 uses.
https://www.amazon.com/Chore-Boy-Copper-Scouring-Pad-2ct/dp/B006K3XS5A/ref=sr_1_4?s=home-garden&amp;ie=UTF8&amp;qid=1519600857&amp;sr=1-4&amp;keywords=chore+boy
Now I use the scotch brand and they are outstanding
https://www.amazon.com/Scouring-Pad-Copper-Coated-PK3/dp/B00HNE8BV6/ref=sr_1_6?s=home-garden&amp;ie=UTF8&amp;qid=1519600880&amp;sr=1-6&amp;keywords=copper+scouring+pad
If you don't want to tear your hand up it helps to use a regular sponge scrubby or brush scrubby on top of it.
Always warm pan hot water as well.
https://www.amazon.com/Pumie-Scouring-Stick-HDW-12T-4PK/dp/B00N3EI34U
I use one of these when I want to get my grill pan perfectly clean. You will have to re-season after though.
I use stainless steel sponges
6 Pack Stainless Steel Sponges, Scrubbing Scouring Pad, Steel Wool Scrubber for Kitchens, Bathroom and More https://www.amazon.com/dp/B07CTHPJYK/ref=cm_sw_r_cp_api_i_h7ZjDbQ7Q1GG0
Stainless Steel Wool. You will not believe how well it cleans off cooked on wort from your cook top.
honestly at first glance and not knowing what these shoes looked like i thought the pink was part of the shoe--it kind of looks dope.
But if you don't think so there's the sneaker cleaning stuff like Jason Markk and the melamine sponge stuff thats like a magic eraser, but cheaper.
The chainmail will work, but its a bit overkill for most things if your pan is in good shape. If you too crazy with it, you might rip a little seasoning off.
In addition to the old salt/oil method, plastic scrubbers ( like these ), Scotch Brite Non Scratch, the blue kind, not the green ones, and/or a stiff nylon brush under hot water all work great. Lodge also makes Scrapers that are very useful.
Melamine foam. Also known as wizard erasers I think?
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Don't buy another name brand magic eraser. These are identical at a fraction of the cost. I use these for LITERALLY EVERYTHING. Countertop, stove, use them on my feet my shoes my car. It is the BEST cleaning utility of my lifetime.
Got a white board that won't wipe clean? Take some windex and scrub the board with an eraser, apply a new coat of whiteboard finisher and bam, just saved yourself $40.
I can't sing the praises of this item enough.
You're welcome 😁
100Pcs/lot ERASER CLEANER MAGIC MELAMINE SPONGE CLEANING 10x6x2CM https://www.amazon.ca/dp/B00XC32NMK/ref=cm_sw_r_cp_apa_i_E6HwCbSTEVNW7
They arrive in a big bag, but each sponge is individually wrapped.
I could be wrong but there is a product they sell that has a compound in the scrubber that when you wet it and scrub it comes out and works on the item your scrubbing. I used some stainless steel scrubbers i bought. there didnt seem to be anything in them, and they didnt seem to do anything to my pans at all. they were little balls of silver stainless steel. I searched for scotch brite aluminum oxide. this is what i found: https://www.amazon.com/Scotch-Brite-Production-Aluminum-Length-Maroon/dp/B00EW7MCCQ
this is what i used: https://www.amazon.com/Scotch-Brite-Stainless-Steel-Scouring-Scotch/dp/B00MNPDYHQ/ref=sr_1_11?s=industrial&amp;ie=UTF8&amp;qid=1501072309&amp;sr=1-11&amp;keywords=stainless%2Bsteel%2Bscrubber&amp;th=1
That what I would have thought, but then why do they sell pumice specifically for cleaning toilets?
If you need more, order now on Amazon. Same product minus the name brand mark up. There are a lot of different sellers with different quantities based on needs. Melamine Foam Cleaner - https://www.amazon.com/dp/B076Q7JHR2/ref=cm_sw_r_cp_apa_i_XzuBDbXVWNJ2P
aqadvisor.com is pretty good for estimating basic stocking levels. You should probably get a couple more harlequin rasboras before adding anything else to the tank. They do best in schools of five or more. Even after adding more rasboras you still have room for shrimp. The shrimp's survival depends on the betta's temperament. I've had good luck with two different bettas in tanks with ghost shrimp, but some bettas just like to hunt the shrimp down until there are none left. More plant cover or a cave would help their chances of survival.
The original Magic Erasers are totally aquarium safe. The bathroom or kitchen specific ones have some extra chemicals and scents added so they should be avoided. Original Magic Erasers are just melamine foam and you can get it cheaply and in bulk from sites like Amazon.
Use a pumice stick
https://smile.amazon.com/U-S-Pumice-1001-Scouring-Stick/dp/B018UR7LPG/ref=sr_1_7?crid=18Q75M3YK1LN9&keywords=pumice+stone+for+toilets&qid=1574644719&sprefix=pumic+%2Caps%2C140&sr=8-7
This hand cleaner works well on tubs
https://smile.amazon.com/Cleaner-Laundry-Stain-Lifter-Ounce/dp/B01DWNBDEI/ref=sr_1_3?crid=2PQQJE7NFQ43I&keywords=goop+hand+cleaner&qid=1574644940&sprefix=goop%2Caps%2C132&sr=8-3
Both are safe, no fumes, no blinding hazard, no lung respiration hazard.
And get yelled at by cost-conscious wife about why you spent nearly $1/sponge for a Magic Eraser® when you could have gotten the Melamine sponges 100 pack for $8 which is the exact same thing?
If you do, try and find a nylon mesh type scrubber, almost like a loofa sort of material[like this](Cleaning Solutions Nylon Pot Scourer Pads, Set of 5 https://www.amazon.com/dp/B00RW8TU5E/ref=cm_sw_r_cp_apa_ExwoybHHHX68A) . Nylon will resist the chemicals and heat. I assume you're talking about the crank vent that's connected to the pair system? The one that gets oil residue on it?
Ugh, forget about linking on mobile. You get the idea.
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Here is your magic eraser. Only without label. Probably 10 times cheaper on aliexpress (if you ignore shipping).
I use this chainmail everyday just with my hand. FlavorMaster Cast Iron Skillet Cleaner Chainmail Scrubber for Cast Iron Pans Removes Burnt-On Crusty Dried Food https://www.amazon.com/dp/B07KWBRWQJ/ref=cm_sw_r_cp_api_i_ke.pDbDAHB3C6
I have not tried this on a SS mod specifically, but I am a machinist by trade and we use Scotch-brite to polish various steel, brass and aluminum parts. I use it on my copper Stingray and it puts a bunch or super fine scratches on it that give it a really nice (in my opinion) matte shine. They are cheap enough from wally to try it out.
If you can get your hands on some brown 3M Scotch-Brite (the pads, not discs), it'll be less hard on the metal than the steel wool the next time around.
It's stainless steel. I wouldn't worry too much about damaging it.
Just soak it in hot soapy water for an hour and then go at it with one of these: http://www.amazon.com/Scotch-Brite-Stainless-Steel-Scouring-3-Pad/dp/B002CQTXBC/ref=sr_1_1?ie=UTF8&amp;qid=1462972888&amp;sr=8-1
https://www.amazon.com/dp/B007EUSKNI/ref=cm_sw_r_cp_apa_i_wjArDbGCW72JR
Looks like cooked on food, or hard water deposit. Go to the store, get a scouring pad, and go to town. It'll take awhile, but it should clean right up.
You can buy 100 of those for $12 on Amazon https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Barkeepers Friend + Heavy Duty Scour Pad
I used this combo on my baking trays this past weekend, worked great.
(https://www.amazon.com/Heavy-Duty-Scour-Pad-86/dp/B000KKIMU0).
I alresfy have read the other responses, and they all seem to be varied enough so that your answer is: do whatever you feel you need to.
But, i can also weigh in: I do the same as you, except I also have a cheapo plastic dish scrubber (https://www.amazon.com/dp/B00RW8TU5E/ref=cm_sw_r_cp_api_mXG1xbMGBYXHS) and i use it only for my cast iron. Great for getting the crud off and i dont have to worry about mucking up my normal scrubbing utensils.
How about $12 for 100? Works just as well as the name brand...
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Stuff a 3M pad up the spout.
More than you need on Amazon
If it's hops you'll have to clean out the tube/poppet/tap/etc. then find a way to filter it BEFORE it enters the dip tube.
Someone below mentioned a muslin bag, but that might cause resistance or foam up the beer.
Stainless steel scouring pads might work. (this was suggested to me once here when I had the same issue). THESE But make sure you boil/sanitize them first and then just get it the bottom of the keg around the bottom of the dip tube. The idea is this will catch the hop sediment before it enters the dip tube. Good luck!
I cant beleive nobody has mentioned this:
https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK
Seriously makes cleaning SO much easier.
Get it hot then stick it in some brass or copper scrubby things. This would be the main way. You can also use copper scrubbing pads which can usually be picked up in a cleaning aisle in your local store. It's nice to have a container for it as holding one of the pads by hand is a bit sketchy but doable.
You could also consider getting a solder wick or vacuum pump to remove the build up from the last job.
Let it sit overnight with water and some dish soap. Then boil with washing soda Sodium Carbonate, if still stubborn then like IceColdCarnivore said scoure with a stainless steal pad and some elbow grease....
I use a [melanine sponge] (https://www.amazon.com/Baoer-100Pcs-Melamine-Cleaning-10x6x2CM/dp/B00XC32NMK) myself and it works pretty well.
I've removed clear coat with 3M pads, they come in a variety of grits and leave a nice surface finish if you're careful with them. https://www.amazon.com/Scotch-Brite-General-Purpose-6-Inch-9-Inch/dp/B000LPN3WQ
https://www.amazon.com/Chore-Boy-Copper-Scouring-Pad-2ct/dp/B006K3XS5A
Thats the choy - alternatives can be found but not as good. Some have soap and chems on them, some have wires that are too thick, your boy choy gets you everytime. Just burn the copper coating off completely before loading
Not at all. Rubbing alcohol is quite gentle. The magic erasers are cheap if you go this route, which I will do momentarily. But Mr. Clean 2 or 4 packs should work nicely for you.
Dip the eraser in alcohol, and scrub medium force. It'll come right off within seconds! :)
I found that using a metal "sponge" to get off the initial dough and then using a proper sponge for finishing works well for me. Originally for cast iron but it has become a staple in my cleaning process.
This is similar to what I have: https://www.amazon.com/dp/B07KWBRWQJ/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B07KWBRWQJ&pd_rd_w=byNqY&pf_rd_p=2bd81721-c115-4b8d-93a3-2ecd17466ded&pd_rd_wg=PmTf9&pf_rd_r=H72D0SGQRQ473EAFVN0T&pd_rd_r=3bf1c944-2ef4-11e9-be2f-055375b55aef
I used these on the backs of my guitar necks which make them silky smooth... with a subtly matte finish. It's also reversible with some rubbing compound.
Does anyone have any experience using cheap melamine sponges to clean their tanks? Specifically the generic ones you can buy in bulk like these. I'm mainly concerned about them deteriorating inside the tank while I'm using them.
The chain mail thing is great if you want to go that route. Personally I just use a perfectly normal stainless steel scouring pad that you can buy pretty much anywhere for a few dollars. I literally get them at my supermarket and for the past 10 years they have gotten the job done just fine. Good luck!
edit: as to this stuff
>I guess I’ll just buy a chainmail scrubber - but what do I do after cooking? Let it cool? Can I cool it down with cold water? Is 10-15 minutes enough cooking? Do I then go at it with the chainmail and running water?
I let mine cool off. Usually I just go eat dinner. Then when I wash up I wash the pan. Cooling it with cold water .. well I've done it. It works. People will tell you that you have a chance of warping/cracking the pan. If it is hot enough they are correct! So typically I just leave it on the stove till after my meal and then clean up.
>I’m new to this all and struggling. My housemates are all having a go at me for using soap and I explained that lye is the problem but they look at me like I’m an idiot.
Soap gets things clean. Clean is good. Use soap.
This is easy to fix. Use a scotchbrite pad, not the sponge, the actual pads you get at a hardware store. The rougher the better, scrub this out and it should be fine. If you'd like, you can also get a finer pad to finish off the surface and smooth it out.
http://www.amazon.com/Scotch-Brite-Heavy-Scouring-Count/dp/B003FYJ83S/ref=sr_1_1?ie=UTF8&amp;qid=1420045474&amp;sr=8-1&amp;keywords=scotchbrite+pad
I've used a normal cloth(?) scouring pad like these and from carelessly scratching over parts that have matte plastic, it does scratch up, just harder and it's not that noticable or looks that great (at least in my opinion)
maybe find something small you barely use or a 'hidden surface' somewhere so you can try it out and see how you like it
Yep, magic erasers or the off brand will take care of that way faster.
Something like this would work: http://www.amazon.com/3M-Scotch-Brite-Stainless-Steel-Scouring/dp/B002CQTXBC/ref=sr_1_7?ie=UTF8&amp;qid=1372694956&amp;sr=8-7&amp;keywords=steel+wool
I have to clean the outside of my filters every 3-6 months. The pores on the outside clog up with a thin slick sort of film in my case. I use a 3M scouring pad and very lightly rub it on the outside. Then rinse the filters with clean water. You really should disassemble and clean your Berkey at least once every six months anyways.
Best tank cleaning purchase I have made! Acrylic safe too!
https://www.google.com/url?sa=t&amp;source=web&amp;rct=j&amp;url=https://www.amazon.com/USMYTHA-Melamine-Cleaning-Multi-Functional-10x6x2CM/dp/B00XC32NMK&amp;ved=2ahUKEwiy0qPy4oLlAhVog-AKHdvzB6kQFjAAegQIAhAB&amp;usg=AOvVaw1bGWfw6w4-Ildnbbs8ow7w&amp;cshid=1570197883990
Thanks for the reply!
Haha it was mostly just because a lot of the threads online about cast iron table saws and rust seem to warn against it. I have a ROS but no belt sander so that definitely could be an option. I did stick one of these on the ROS and go over the top after electrolysis and it did an okay job of cleaning up and smoothing out the area to the left of the blade opening and miter slot (it was comparable to the right section. I'll post an update after I have a chance to work on it some more this weekend!
That's fucking awful, I would be absolutely livid if that happened to my kitty. Seems like the same thing the sponges are made of after all.
Good choice. I have the same. Here are some bullet points:
I cook all the time for my lady and myself. 4 burgers. 8 wings. A full slap of spare ribs (cut in haft), 2 T-bone steaks, Shish-kabobs . So this grill is perfect for your application. Granted, don't plan on cooking a side with most meals, as the meat takes up a good amount of room.
Oil is not needed. Thou I tend to Pam not stick spray the griddle right before I put the meat on. It works fine. A little elbow grease when you clean it may be needed, but it is fairly easy.
Some Proof of what I have done with mine:
If it looks shiny and slick-like, try taking a magic eraser to it.
Just wet the eraser slightly and try rubbing off the oils. The pad should get the grip back.
Bathtub. I have secrets. Melamine foam will work wonders for your tub. Just order on amazon or buy "Magic Eraser" from supermarket and scrub. It's going to be a LITTLE pricy http://www.amazon.com/CLEANING-MELAMINE-CLEANER-ECO-FRIENDLY-MATERIAL/dp/B005HZWYNY This will last you a REALLY long time though so not too expensive.
Relax... Relax... just use a melamine foam sponge, that thing will be clean in 4 seconds. Use some gloves if you don't want to touch it.
These should work.
HTH;HAND.
A friend's ex did this regularly to their business vehicle. He learned that a car wash with the high pressure hose works fairly well and you can use a green scrubbie (Amazon link because some folks have asked what that is before) very gently to get any remaining bits out. If you get down to metal, make sure you use some touchup paint to seal that back up or it'll rust on you.
His ex tended to just graze them. If you have serious damage, you probably need to be careful of removing too much other paint. HTH
Edit: Forgot to add that if there are minor scratches left, you can often buff them out with rubbing compound (ask at any auto parts store).
They do! Except I go buy the Japanese version from the "everything is $2.80" Daiso store, which is exactly the same thing, because you get a whole bloody sheet instead of a tiny rectangular prism you would get if you bought the Chux magic eraser version that cost an arm and a leg.
Though that's just in Australia. You could probably find it around. It's called Melamine foam. Probably somewhere online for cheaper than corporate priced.
Edit - Hi Amazon! http://www.amazon.com/gp/aw/d/B005HZWYNY?pc_redir=1404530170&amp;amp;robot_redir=1
Nope. I was on my phone before, and couldn't easily give a link. One of these.
I use a heavy duty abrasive scouring pad to clean my toilet. Something like this or this. It works like nothing else. I've used pumice stones with good results, too, but the scour pad is my go-to now since the abrasive doesn't wear down like pumice does. Others in the thread are concerned about leaving scratches. I just checked the bowl with the flashlight and I don't see any.
Go to home Depot and get a pumice Stone and go to town.
It's the same stone that us sold at a higher markup for removing dead skn from feet.
So get an extra one to use after a bath and give yourself a at home pedicure.
Me clean also works but try finding the generic name of that item and get it for dirt cheap for online but if you are in a rush the pumice stone is likely available at home Depot for cheap.
Look at [Amazon](U.S. Pumice 1001 Scouring Stick, Pack of 2 https://www.amazon.com/dp/B018UR7LPG/ref=cm_sw_r_cp_apa_i_EGm5AbE1NQR4X) for results of using the stone.
Mr. Clean magic eraser. AKA melamine foam.