Best surveillance housing & mounting brackets according to redditors

We found 381 Reddit comments discussing the best surveillance housing & mounting brackets. We ranked the 95 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top Reddit comments about Surveillance Housing & Mounting Brackets:

u/itsZiz · 20 pointsr/buildapc

I started with just a few things and then listed everything I see... sorry for the spam
(these are all things I have, feel free to ask any Q's)


- Mini Fridge - https://www.amazon.com/Danby-DAR026A1BDD-3-Designer-Refrigerator-2-6-Cubic/dp/B00MO6V96W/ref=sr_1_8?s=kitchen&ie=UTF8&qid=1519347546&sr=1-8&keywords=mini+fridge


- Cup - https://www.amazon.com/gp/product/B01MUBR8UH/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Air Cleaner - https://www.amazon.com/gp/product/B01BI4UQK0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Good Chair Mat - https://www.amazon.com/Black-Chair-Mat-Rectanglular-ABS-RC-4655/dp/B00D83MURM/ref=pd_lpo_sbs_229_t_1?_encoding=UTF8&psc=1&refRID=CMJS2EM6STF7XCCJZGWZ&dpID=51%252BWDnIRG0L&preST=_SX300_QL70_&dpSrc=detail


- Big Boy Ergo Chair - https://www.ergoexperts.com/collections/ergonomic-chairs/products/office-master-iu79hd-24-7-intensive-use-heavy-duty-high-back-ergonomic-task-chair


- Camera Mount - https://www.amazon.com/gp/product/B00CMLX1O2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Space Heater - https://www.amazon.com/Lasko-Ceramic-Heater-Remote-Control/dp/B00PYDGN18/ref=sr_1_17?s=home-garden&ie=UTF8&qid=1519348189&sr=1-17&keywords=lasko+space+heater


- LED Lights - https://www.amazon.com/gp/product/B01LX9Z3LH/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Foot Rest - https://www.amazon.com/gp/product/B00EN9W3UY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Wrist Rest - https://www.amazon.com/s/ref=nb_sb_noss?url=node%3D510182&field-keywords=lasko+space+heater&rh=n%3A1055398%2Cn%3A3206324011%2Cn%3A9425950011%2Cn%3A510182%2Ck%3Alasko+space+heater


- Underdesk Headphone hanger - https://www.amazon.com/gp/product/B00P31BMHG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Trash Can - https://www.amazon.com/Rubbermaid-Commercial-295700GY-Wastebasket-Rectangular/dp/B079WPRXXS/ref=sr_1_26?ie=UTF8&qid=1519348333&sr=8-26&keywords=trash+can


- Cat Bed - https://www.amazon.com/gp/product/B00DJRCQBW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Keyboard - https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2164


- Keycaps - https://www.aliexpress.com/item/PBT-Backlit-Keycaps-109-Keyset-Top-Printed-Cherry-MX-Key-Caps-For-Tenkeyless-87-104-108/32842167507.html?src=google&albslr=220105582&isdl=y&aff_short_key=UneMJZVf&source=%7Bifdyn:dyn%7D%7Bifpla:pla%7D%7Bifdbm:DBM&albch=DID%7D&src=google&albch=shopping&acnt=708-803-3821&isdl=y&albcp=653478879&albag=34653160498&slnk=&trgt=75384829977&plac=&crea=en32842167507&netw=g&device=c&mtctp=&gclid=CjwKCAiA8bnUBRA-EiwAc0hZk62T3uqIKPVAUNx-ATVUQIzI8kscvB4UdNBR5dMpZ46l1gp9aoD38BoCNXQQAvD_BwE


- Mouse - https://www.amazon.com/gp/product/B01JPOLLTK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Mouse Mat - https://www.amazon.com/gp/product/B0745N6CMD/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Headphones - https://www.amazon.com/gp/product/B007R99S14/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
& https://www.amazon.com/gp/product/B008POFOHM/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Dac/Amp - https://www.jdslabs.com/products/48/objective2-odac-combo-revb/


- Speakers - https://emotiva.com/products/airmotiv-6s


- Subwoofer - http://www.outlawaudio.com/products/m8.html


- Mic - https://www.amazon.com/gp/product/B00KCN83VI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Mic Interface - https://www.amazon.com/gp/product/B0012MIVUQ/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Boom Arm - https://www.bhphotovideo.com/c/product/1194415-REG/o_c_white_ulp_mb_proboom_ultima_lp_adjustable.html?sts=pi


- Web Cam Alternative - https://www.amazon.com/gp/product/B01G9EYN26/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Lens - https://www.amazon.com/gp/product/B00JDGB94S/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- PC Cam Interface - https://www.amazon.com/gp/product/B01N4SM7H6/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Lights Boxes - https://www.amazon.com/LimoStudio-Digital-Photography-Fluorescent-AGG883/dp/B0091HO1FS/ref=sr_1_10?s=electronics&ie=UTF8&qid=1519348726&sr=1-10&keywords=16%22+x+24%22++soft+box


- Light Box Stands & Clamp - https://www.bhphotovideo.com/c/product/1327281-REG/ultimate_support_17637_jamstands_fixed_length_boom.html
& https://www.amazon.com/gp/product/B0010CYHW4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


- Light Bulbs - https://www.amazon.com/gp/product/B01IB8O2VU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/MjrGrangerDanger · 18 pointsr/JUSTNOMIL

Wyze cams are very cheap and reliable as well as highly reccomended. There's a r/wyzecam, because of course there is, LOL...

Wyze Cams are incredibly affordable:

Pan & Zoom model $37.98

Wyze Cam V2 $25.98 plus 20% off now

The cameras are made for indoor use only use only, however can be mounted outside with a skin purchased separately. Both models have birdhouse skins (links below) but they're not as invisible as the ideas posted on the Wyze forum and subreddit.

I also came across this great post on the Wyze Cam Forum to add an extra layer of protection againdt the elements using a trimmed balloon. Lots of ideas for hiding in plain sight.

Pan & Zoom - $13.99

Wyze Cam V2 Birdhouse Suction Cup Mount $12.99 / 1 or $18.99 / 2

I hope this helps!

u/guillermoislas · 10 pointsr/Nest

Although rated for outdoor use, they could overheat and just shut off for sometime while it cools off, happened to my backyard cam. I would recommend this


SDS DS-1250ZJ Universal Sun Rain Shade Camera Cover Shield for Outdoor Camera https://www.amazon.com/dp/B018WJQL0S/ref=cm_sw_r_cp_api_i_QENlDbMVQZKHQ

u/Ninja_914 · 9 pointsr/oculus

here is the mount pack that I bought. I combined the pieces from both to create a single mount that would allow the sensor to sit higher up. You could make the vertical stalk even higher by taking another one of the sections out of the part coming out of the wall but I found that this setup works just fine. When touch releases and I get a second sensor I will probably return the configuration to two separate mounts and mount them in opposite corners of the room.

u/Sea_C · 6 pointsr/Vive

I'm in a dorm room so we have plenty of command hooks and velcro strips from this company. They work really well so far and I have some velcro strips left over so what I was planning to do was order these and attach them with the strips. Should work fine.

u/Honda_TypeR · 6 pointsr/oculus

That is a good idea. I had to kinda of wing it based on amazon purchase histories of other users (and their reviews)

Here is what I used if anyone is curious

https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/

It came with 3 mollys and 3 screws for each one. Oculus sensor cameras are so light weight I did not bother using the mollys. I just used screws only (more than enough grip in drywall for our light weight cams)

u/tricheboars · 6 pointsr/oculus

Okay. So wall mounted sensors are definitely the way to go. I got these:
Uxcell 1/4" Black CCTV Security Camera Metal Wall Mount Bracket https://www.amazon.com/dp/B00UVCKZZ2/ref=cm_sw_r_cp_apip_VYT6El8hJxCub

But the wires right? Well for those I got these:
Wiremold C110 1-channel CordMate Kit, White https://www.amazon.com/dp/B00004W3ZP/ref=cm_sw_r_cp_apip_CCv9zLkKoD43V

Then I have 10ft USB 3.0 extension cables on two sensors and a 16ft active USB 2.0 cable on my third sensor.

I ran the cables along the baseboard with the cord mate runners. They are white which matches my baseboards and then I run the cord mates with the sensor cables inside up the walls in the corners.

Shit works. Tracking is flawless. It's barely noticeable and I never have to mess with them now that they are setup.

When it comes to vr don't be surprised if you need to rearrange the layout of your furniture in the computer room. Think long and hard and then commit.

It helps if you draw this shit out first and think about how to lay out it before doing anything. This project will take a day but once your done your done.

u/glurtz · 5 pointsr/oculus
u/fizo4444 · 5 pointsr/oculus

I use thumb tacks (they actually hold really well) cause I don't want to put holes in my walls either. This is the one I got. I took out all of the extension pieces.

https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/VR247 · 5 pointsr/oculus

haha... I bought these 2 for $15. Mounted them last night, they work PERFECTLY.

u/Ascendor81 · 5 pointsr/oculus

After I mounted the camera at about 6 feet on the wall... everything is better. It might be just that it was too close to the desk surface, maybe seeing my rift ir's in reflection off the top of the table, i would see a small drift sometimes. After mounting on wall, tracking is rock solid. With such rock-steady tracking, I do not bee-bop all over the place. Loving the Rift even more. I got the mount from amazon, fits perfectly.

https://www.amazon.com/gp/product/B009AOWF50/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/steampvnc1880 · 5 pointsr/oculus

Yep. one more sensor is a must have. Also get three of these wall mounts
https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
I tried going with 8 foot tripods for a while but you'll want as much floor space to walk around in as possible

u/Maldane · 4 pointsr/oculus

These are the ones I used, I broke them down to the shortest configuration that I could to make it a cleaner look.

https://www.amazon.com/VideoSecu-Adjustable-Mounting-Installation-Surveillance/dp/B001D49TU4

u/Then000bster · 4 pointsr/oculus
u/YOLO_HASHTAG_SWAG · 4 pointsr/oculus

List of components:

u/TrefoilHat · 4 pointsr/oculus

It comes with two sensors.

Another post said Best Buy online has the single sensor, and you also may be able to buy it direct from Oculus (https://www.oculus.com/accessories/).

Don't wait to play roomscale games until you get a third sensor though. Two work surprisingly well, especially if you mount them high (ceiling or wall) and point them down. I used this one with Command strips to stick it to the wall without drilling holes.

Have fun!

u/hepatitisC · 3 pointsr/wyzecam

You could absolutely get away with mounting it on a shelf. I just didn't like that option because the sides of my cabinet blocked some of the field of vision. I used something similar to this rigging up a rare earth magnet and using the old metal plate from the V2. What I used was not the exact model that I linked, so I'm not recommending that one by any means. I took to ebay and found something like that from China for cheap. I think it cost me about $10 for the magnet and mount, so it wasn't bad. Just want to give you an idea of some of the options that you could come up with if the other mounting options don't work well for you.

u/Neonridr · 3 pointsr/oculus

I used a CCTV camera style mount that I stuck to the ceiling. You can either screw them in or even just use 3M command strips to hold them up.

I used these for example:

https://www.amazon.ca/gp/product/B005H1W4LA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/Inimitable · 3 pointsr/oculus

Just to provide another cheap option, I used these: https://www.amazon.com/gp/product/B009AOWF50

Works perfectly.

u/Anth916 · 3 pointsr/oculus

> Also note that their maximum recommended area is 8'x8'. And in the link from support the maximum distance between sensors is 14'.

Yeah, I saw that, but I imagine that they are underestimating the range to be on the safe side. I guess I might just have to experiment with the install. It's going to be a bit of a pita to have to experiment, but oh well. I ordered three of these mounts:
https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/ref=sr_1_4?ie=UTF8&qid=1500067030&sr=8-4&keywords=cctv+mount

So, I'll be able to use these mounts to angle them down towards the play space better. (I currently have them on maximum tilt, but I still don't think they are angled down far enough) besides currently being too far away as well.

u/khoker · 3 pointsr/oculus

I use these camera mounts, which are $6.79 (with free Prime shipping) and give you basically 360 degrees of motion for tweaking the angle.

u/Pteroc · 3 pointsr/oculus

i dont think thats very necessary. though, yeah, might as well. i know exactly what he's talking about. any security camera mount will do.

here are the ones i got.

https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Camera/dp/B00R96X9DS/ref=pd_sim_63_34?_encoding=UTF8&pd_rd_i=B00R96X9DS&pd_rd_r=AKK3TTZB98ME2QCMTB4J&pd_rd_w=o7hH7&pd_rd_wg=jHVox&psc=1&refRID=AKK3TTZB98ME2QCMTB4J

you can get them in the perfect spot and angle, easy.

u/shortyjacobs · 3 pointsr/oculus

I'm not him, but I used these and these. Looks great and tons of adjustability. I trimmed the command hook/loop strips so only the pull tabs stick out the bottom, (nothing out the top...since the strips are rectangles and the mounting base is circular...).

u/CoryReyes · 3 pointsr/oculus

Just bought this.

You can unscrew the head of sensor and mount on this then put on wall

https://www.amazon.com/gp/product/B00R96X9DS/ref=crt_ewc_img_srh_3?ie=UTF8&psc=1&smid=A399QJ4AUP5BQK

u/remembertosmilebot · 3 pointsr/oculus

Did you know Amazon will donate a portion of every purchase if you shop by going to smile.amazon.com instead? Over $50,000,000 has been raised for charity - all you need to do is change the URL!

Here are your smile-ified links:

https://smile.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o02_s00

https://smile.amazon.com/gp/product/B00C7SA21U/ref=oh_aui_detailpage_o02_s00

---

^^i'm ^^a ^^friendly bot

u/livevicarious · 3 pointsr/oculus

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 These puppies are amazing. All metal, SUPER small, and have complete adjustment for height and rotation adjustment. 6 bucks.

u/Westley-Roberts · 3 pointsr/oculus

https://www.amazon.com/dp/B01HMNJIO6


For $8 you can mount them w/ 3 screws each. You will also save the rest of us from having heart palpitations.

u/CMDR_Beans · 3 pointsr/oculus

The screw threads are the same as standard camera mounts, so I got these from Amazon:
https://www.amazon.co.uk/dp/B01N4IOQP6/ref=cm_sw_r_cp_apa_lYKyzbABKAFSM


I mounted them about 7' up and angled them downwards:
https://imgur.com/gallery/99Ih4

u/DoesItFitHere · 3 pointsr/oculus

Found the US link: Shappy 3 Pack Security Wall Mount Indoor and Outdoor Mount Bracket Adjustable for Wyze Cam Pan 1080p Pan, Arlo Pro 2, Arlo Pro, Arlo, Arlo Cam and Other Compatible Models (Black) https://www.amazon.com/dp/B01N4IOQP6/ref=cm_sw_r_cp_api_i_g1DBCb62VABX5

u/Jesmasterzero · 3 pointsr/oculus

> due to cable management and a less than enthused girlfriend.

Heh, been there.

The rod istelf isn't mountable, it doesn't have screw holes. You could make them yourself I guess, but honestly, you're better off buying some CCTV mounts like this to mount the sensors:

https://www.amazon.co.uk/Shappy-Security-Outdoor-Adjustable-Compatible/dp/B01N4IOQP6/ref=sr_1_1?ie=UTF8&qid=1501668002&sr=8-1&keywords=cctv+mounts

Bright light from the window might interfere with the sensors, but if the windows are covered it will make no difference if the sensor is facing them.

u/jebinspace · 3 pointsr/oculus

Drop ceiling mounts are really easy. Use these mounts:

https://smile.amazon.com/dp/B07BPQS2XG/ref=cm_sw_em_r_mt_dp_U_o7zyCb512PHSN

​

But don't use the included hardware, use a method as detailed here:

https://www.security-camera-warehouse.com/installation-portal/bullet-camera-ceiling.php

u/[deleted] · 3 pointsr/wyzecam
u/ElleMNOPea · 3 pointsr/homeowners

Yep! I used the following:
Mrount Wyze Camera Wall Mount Bracket, Protective Cover with Security Wall Mount for Wyze Cam V2 V1 and Ismart Spot Camera Indoor Outdoor Use by (Black, 1 Pack) https://www.amazon.com/dp/B07DW971RT/ref=cm_sw_r_cp_api_i_QnzOCbXMPDKJZ

u/andrewcfitz · 3 pointsr/wyzecam
u/sec713 · 2 pointsr/xbox360

Unfortunately the 360 Kinect doesn't have the camera-mount screw threaded hole in the base like the XB1 one does. I know the base of this 360 Kinect mount does. An alternative solution to this problem would be to do what I did, and buy a simple security camera mount kinda like this one and put the Kinect on the wall, behind the TV.

u/BennyFackter · 2 pointsr/oculus

If you'd like to avoid adhesive and prefer screw-mount for any reason, I used these with great results, $8.89. These also allow fully vertical placement, which it doesn't look like the OP link's do.

u/TheBobbboy · 2 pointsr/oculus

Here are the links for all the extras I bought to set it up.

u/AchillesXOne · 2 pointsr/oculus

I have my 3-sensor setup at head level... about 6'. Initially I was going to place them much higher (around 8'); but came to the realization I would be losing a little range in the bargain. It wouldn't be much, but given the size of my playspace, it was borderline achievable, so I played it safe. I rarely encounter tracking issues.

I'm not much a fan of tripods. I find them cumbersome and tacky. I also don't relish the idea of wires hanging out all over the place, or having to reconfigure or reset every time I want to jump in to a session.

I suggest you find a weekend to spend some time measuring the dimensions of your area, invest in some cord concealers at the local hardware place (you can paint them), pick up the recommended USB extension cables (if necessary), and purchase some cheap wall mounts.

The result is functional, an aesthetically pleasing.

My setup - image 1

My setup - image 2

My setup - image 3

Edit: Formatting


u/MattVanAndel · 2 pointsr/oculus

Eeek. Don't mount the sensors on the ceiling... upside-down sensors are the source of more tracking problem threads than can I can count. Get some proper swivel mounts and put the sensors on the wall right-side-up.

These are what I use and endorse, it's just $15 for a 2-pack:
https://www.amazon.com/VideoSecu-Adjustable-Mounting-Installation-Surveillance/dp/B001D49TU4/

u/IrishVixen · 2 pointsr/Abode

I don't have the video cam, so I can't offer up specific recs, but there are a number of mini/pocket sized tripods with small ball swivel heads that might help if you're wanting to set it on a shelf or table. Manfrotto offers a pretty solid one, or some of the ones sold as cell phone tripods might work if they aren't so lightweight that they fall over easily.

Alternatively, something like this could also work, though depending on camera weight or the center of gravity, you'd probably need to screw it down to the shelf or to a board painted to match: https://www.amazon.com/VideoSecu-Adjustable-Mounting-Installation-Surveillance/dp/B001D49TU4/

u/Sigmag · 2 pointsr/battlestations

Man, you have no idea how well it gets rid of that line of sight issue. I can lay prone and shoot! People were getting mad at me in multiplayer for it, lol.

It's super easy and will only cost you $40~ - here's what I used with mine:

u/Xenolith234 · 2 pointsr/oculus

If you have the room/ability, I'd mount the sensors on the ceiling or corners of the room. I got two (VideoSecu 2 Pack 2-6 inch Metal Wall Ceiling Mounts Adjustable Pan Tilt Video Camera Mounting Brackets https://www.amazon.com/dp/B001D49TU4/ref=cm_sw_r_cp_apip_bYfm6J1rX8VQH) to mount them cheaply and securely, and three (Cable Matters SuperSpeed USB 3.0 Type A Male to Female Active Extension Cable 5 Meters/16.4 Feet https://www.amazon.com/dp/B00DMFB5OK/ref=cm_sw_r_cp_apip_z9Cm45OtYiwYz). Purchasing a third sensor nets you a USB extension cable, and I also got an HDMI extension cable to give my Rift some extra room. Sorry for all the links! The ceiling setup gives me pretty flawless tracking.

u/Grape_van_ · 2 pointsr/oculus

Using these: VideoSecu 2 Pack 2-6 inch Metal Wall Ceiling Mounts Adjustable Pan Tilt Video Camera Mounting Brackets with Ceiling Clip for CCTV DVR Home Installatio https://www.amazon.com/dp/B001D49TU4/ref=cm_sw_r_cp_apap_rMVvC74Ui1ffH

I'll try to get you a closer picture tonight.

u/Reddituser703 · 2 pointsr/oculus

You can also use camera mounts. This is what I use for mounting my 3 sensors, but there are many different choices if you prefer a different brand.

VideoSecu 2 Pack 2-6 inch Metal Wall Ceiling Mounts Adjustable Pan Tilt Video Camera Mounting Brackets with Ceiling Clip for CCTV DVR Home Installation Surveillance System 1SG https://www.amazon.com/dp/B001D49TU4/ref=cm_sw_r_cp_apa_CWaBzbBAPEBSX

u/CMDR_DrDeath · 2 pointsr/oculus

Looks nice, but I wouldn't store the Rift upside down.
Aside from that you should consider wall mounts like this : https://www.amazon.com/VideoSecu-Adjustable-Mounting-Installation-Surveillance/dp/B001D49TU4/ref=sr_1_5?ie=UTF8&qid=1496041851&sr=8-5&keywords=camera+wall+mount

Very easy to set up.

u/gatormac2112 · 2 pointsr/oculus

THESE are a little pricey at $15 for the pair but are doing a good job for me

u/bifurk8 · 2 pointsr/oculus

I can't comment on the effectiveness of my mounting yet, since I've still just got one sensor until tomorrow - but I've mounted mine about 7 feet high on the wall (just above door frame height). When testing potential mounting spots, I found that any higher and tracking would get wobbly or that the Rift sensor setup would complain about being too far from the sensor.

I used these security camera mounts from Amazon (they sell them in both two packs and single packs, so I ended up buying three total). I like these because they can extend out from the wall with the included extensions and I needed that extra length because I have a really deep desk that would occlude tracking if they didn't stick out so far. Note that these mounts are probably too heavy to use with command strips, they really do need to be screwed in (I tested them with command strips just while I was trying them in different positions and three large command strips did hold the mount+sensor during testing, but didn't seem like it would hold reliably forever).

When testing different positions, I used DeskScene to visualize and test the tracking area. Note that it currently only works with one sensor, but the developer has said he's working on adding support for additional sensors.

I think if you have room for them on your desk, your desk doesn't occlude them when you crouch, and you can step far enough back from your desk when playing to be in their sweet spot, there's no special reason to mount them, though.

u/Nipz-TF2 · 2 pointsr/oculus

I highly recommend you hang them from the ceiling.
You can buy cheap camera mounts on amazon, and pickup a cable hider at home depot. it's cheap, there's no wire mess, it's easy to patch if you ever take it down, and you don't get tracking issues when you go low to the floor where the edge of the table would otherwise block the camera from seeing.
Here's examples,
https://www.amazon.com/gp/product/B001D49TU4/ref=b2b_gw_d_bia_172282_a2_3_p/161-5249210-3309400?ie=UTF8&pd_rd_i=B001D49TU4&pd_rd_r=1N4N8EE6PTT5GCWWFQ7M&pd_rd_w=STdGU&pd_rd_wg=QlaPK&pf_rd_i=b2b-desktop&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1N4N8EE6PTT5GCWWFQ7M&pf_rd_t=ABGateway&refRID=1N4N8EE6PTT5GCWWFQ7M

http://www.homedepot.com/p/Legrand-Wiremold-CordMate-Channel-White-C10/202059078

u/JohnnyGFX · 2 pointsr/oculus

I bought a pair of these off Amazon. They arrived yesterday and they seem like they are going to work perfectly for mounting up on the wall for my cameras. Comes in a 2-pack.

https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

u/SwissMoose · 2 pointsr/oculus

They seem to be. You could use 2-3 on some kind of ball camera mount and then additional strips down the cable at intervals. Would be unlikely that you would lose them all at once. USB cameras are pretty durable anyways.

u/DeadLeftovers · 2 pointsr/oculus

I picked up the same stuff and to my surprise it would not stick to the rubber bottom of the DK2 camera. Almost like it was made of teflon. I ended getting this wall mount from amazon. It worked fine but I was still too close to the camera so I picked up a cheap 1' tripod from bestbuy and setting it to the far left of my desk behind my TV and its been working fine.

u/Carlifex · 2 pointsr/microgrowery

I have a room where i dont need a tent. Im using this: https://www.amazon.com/Arkon-Camera-Mount-Camcorders-Cameras/dp/B00CMLX1O2/ref=sr_1_22?s=electronics&ie=UTF8&qid=1538577100&sr=1-22&keywords=wall+tripod+mount

connection to the pi: Just get a cable for your A/V output (in my case a Mini USB Cable

Then install entangle on the pi to test it. (better usability) or just read the documentation of gphoto2 to check. You might also wanna look up if your cam is supported by it.

cheers.

u/kommutator · 2 pointsr/oculus

As /u/deathmonkeyz said, there's a 1/4" tripod mount on the bottom. You can use something like this to mount it to a wall. (That's just the first match I found for such a thing. There's a lot of different styles and prices. Chances are with the low weight of the Oculus sensor, you could get away with something cheaper.)

u/Ryvaeus · 2 pointsr/Twitch

I use this. u/EposVox uses it as well with his Panasonic G7 and for good reason; this thing can hold a pretty hefty load indefinitely as long as it's solidly mounted to something (in my case, I have it screwed onto the underside of a shelf above and behind my monitor).

u/quarl0w · 2 pointsr/homeautomation

They don't make an outdoor camera, but I have seen people post that they fit in the Nest Cam outdoor mounts. They were a lot more popular before the Nest outdoor cam was released.

Something like this:
Dropcases Nest Cam & Dropcam Pro Case Outdoor Enclosure, 3.9 by 2.1-Inches, Black https://www.amazon.com/dp/B00Q4OSXA0/ref=cm_sw_r_cp_api_lxfNzbPMGRMHM

u/ismellbacon · 2 pointsr/HomeImprovement

I install a lot of these for companies and we always run POE. Run a Cat6 cable to each location and buy a small (4 or 5 port)POE switch and Ethernet to USB adapter on Amazon. This will likely be cheaper and less invasive than having an Electrician run new outlets.

POE switch>USB Adapter>Nestcam.

Also they make outdoor covers for the nestcams so they are secure and safe from weather

https://www.amazon.com/Dropcases-Dropcam-Outdoor-Enclosure-2-1-Inches/dp/B00Q4OSXA0/ref=sr_1_12?ie=UTF8&qid=1479837211&sr=8-12&keywords=nest+cam+cover

u/cpverne · 2 pointsr/oculus

I just got one of these and put it on the wall last night:

Omall (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera

https://www.amazon.com/Omall-Security-Housing-Bracket-Camera/dp/B00R96X9DS/

It's really small and light. To mount it, I got some large velcro command strips and cut 2 in half, putting the tabs half on the wall:

Command Damage Free Picture and Frame Hanging, Large Strips

https://www.amazon.com/Command-Damage-Picture-Hanging-Strips/dp/B00404YKZI/

Works great and doesn't seem to have an issue holding the camera up. I'll update if it ever falls off, but I doubt it will.

I'll post a picture of it mounted tonight.

u/flawlesssin · 2 pointsr/oculus

3M Dual Lock Reclosable Fastener SJ3560 250 Clear, 1 in x 6 Ft https://www.amazon.com/dp/B00JHKTDMA/ref=cm_sw_r_cp_apa_ZbVPAbP995C69

I used that and these mounts:

OdiySurveil (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera https://www.amazon.com/dp/B00R96X9DS/ref=cm_sw_r_cp_apa_cdVPAbAYQ3Z36

No screws needed, and the Velcro hasn't moved a bit so there's no danger of your sensor falling.

They aren't tripods but they're very portable!

u/SpaceNinjaBear · 2 pointsr/oculus

I used these wall mounts. They're small, sturdy, and lightweight--perfect for the Oculus sensors. Medium Command strips are more than enough to hold them up.

Just a heads-up, the base plate is a concave shape, as in it's not completely flat on the bottom, but that's not an issue. You can put a single Command strip across two of the screw holes and the weight of the mount and the sensor will hold it to the wall.

u/whitesox313 · 2 pointsr/oculus

No problem--I'll include them all, plus what I used to mount the cameras if interested. Again, no tracking or lag issues whatsoever. Works like it's plugged directly into the motherboard.

Headset Extension:
https://smile.amazon.com/gp/product/B00JJ519KC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Sensor Extension: https://www.amazon.com/gp/product/B00NH12O5I/ref=od_aui_detailpages00?ie=UTF8&psc=1

Sensor Mounts:
https://smile.amazon.com/gp/product/B00R96X9DS/ref=od_aui_detailpages00?ie=UTF8&psc=1

u/chrisv25 · 2 pointsr/oculus

I switched to these based on another responder's recommendation

https://smile.amazon.com/gp/product/B00R96X9DS/ref=od_aui_detailpages00?ie=UTF8&psc=1

u/shidarin · 2 pointsr/Vive
u/Henry_Yopp · 2 pointsr/Vive
u/ThisNameTakenTooLoL · 2 pointsr/oculus

But you can get regulated wall mounts for half the price:
https://www.amazon.com/Uxcell-Black-Security-Camera-Bracket/dp/B00UVCKZZ2

u/Davidf68 · 2 pointsr/oculus

I got these from the UK Amazon site work a dream from China but arrived in about 1 week. 4 for £11.20 sourcingmap® 1/4" Metal Wall Mount Bracket Black for CCTV Security Camera https://www.amazon.co.uk/dp/B00UVCKZZ2/ref=cm_sw_r_cp_apa_S0i8ybX6SJZ9S. I also bought this 10 MTR active usb 2 extension for the attic space works absolutely fine no issues yet.UGREEN USB Extension Cable 10m USB 2.0 Active Repeater USB Male to Female Lead With Signal Amplification Active Cord for Printers,Keyboards, Game Console, loudspeakers, scanners, displays, headsets etc. https://www.amazon.co.uk/dp/B00B2HP3A2/ref=cm_sw_r_cp_apa_R8i8ybRAMCD9W.

u/FattyMagee · 2 pointsr/oculus

They're $6 on amazon. Link.

u/Ajedi32 · 2 pointsr/oculus

You could skip steps 1, 2, 4, 5, and 6 and save ~$20 by just buying a couple tripod clamp mounts: https://www.amazon.com/BESTEAM-Tripod-Camera-Reflector-Backdrop/dp/B00Y4FVLYG/

Or if you're comfortable with putting screws in your wall you could save ~$30 by using a camera wall mount: https://www.amazon.com/FastSnail-Security-Adjustable-Interface-Standard/dp/B01M1CDI8G/

u/jjkramhoeft · 2 pointsr/oculus

I use wall camera mounts

like these

https://www.amazon.co.uk/dp/B01N4IOQP6/ref=cm_sw_r_cp_dp_T2_TrDGzbFBAJMJD

for my rift sensors you just have to unscrew the stand

edit: it handles turning 360 just fine, the proble there is the cord (both rift and vive)

u/Godit82 · 2 pointsr/oculus

If your playspace has a hard floor I highly recommend some of the anti fatigue foam floor pieces. They make long sessions easier and make kneeling or going prone way more comfortable. Plus it is quite forgiving should you drop a controller or headset. It can also serve as a physical boundary to your play area that you can feel.

You should get some mounts to put your sensors up high on a wall and pointed down. I can recommend a cheap ball joint camera mount that comes in a 3 pack on Amazon.
https://www.amazon.com/dp/B01N4IOQP6/ref=cm_sw_r_sms_apip_9aJqMPIoJ9uHM
And these to keep it tidy
https://www.amazon.com/dp/B071Y1RGPP/ref=cm_sw_r_sms_apip_nNyNjkDh1rnju

If your space is more than 5’ x 5’ you might want to get extension cables for your headset. There is a sticky thread on what cable are confirmed to be compatible.

I’d also consider a “leather” face pad that you can wipe clean. I like my VRCover just because it doesn’t absorb sweat.
https://vrcover.com/product/oculus-rift-facial-interface-foam-replacement-basic-set/

You should think about storage too. You want it handy to minimize setup fiction. A shelf or 3d printing hanging fixture on Thingverse perhaps.

I highly recommend having a fan in the room to keep air moving over you face. It helps you get you VR legs by reducing naseau but also prevents your lenses fogging up. Plus the direction of the breeze can keep you oriented in real space without breaking immersion.

u/cocomilan · 2 pointsr/wyzecam
  1. https://www.amazon.com/Camera-Bracket-Weather-Security-Outdoor/dp/B07G732B9J
  2. Nope
  3. Powered directly by an outlet through walls like in this guide https://www.youtube.com/watch?v=uZFBecgvtQU - same mount I listed too
  4. All placed under roof eaves, though I did seal them with silicone & put a mesh screen on the bottom hole (read reviews on product page for more info)
  5. Samsung 32GB EVO MicroSD Card & it's set to continuously record & events to cloud. Been using them for 4-5 months & no issues. (Well, if I record from the timeline the audio is usually out of sync, but that's actually a firmware issue)
u/sliight · 2 pointsr/Wyze

I bought these for exterior mounting:

https://smile.amazon.com/dp/B07G732B9J/ref=cm_sw_r_em_apa_i_DF7XDbPFVMJN0

For inside I'd probably experiment with the 3m sticky disc and metal disc that sticks to it, that the magnetic camera then sticks to... Literally just stick it to the wall where you want to monitor

Btw, wyze plugs can be used to set timers on your heat and uvb for daytime, then when they turn those off turn on your night lamp or heating pad. I use a dual plug from another company as I've had it long before wyze made theirs.

Could even use the wyze sensors on the doors or cage tops so you're notified when they're opened..

u/alexd51 · 2 pointsr/wyzecam

Wyze Cam Wall Mount Bracket, Wyze Camera Cover with Adjustable Wall Mount for Wyze Cam V2 V1 and Ismart Spot Camera Indoor Outdoor Use, (White 3 Pack) https://www.amazon.com/dp/B07G732B9J/ref=cm_sw_r_cp_apa_i_tKr2DbA1J4219

u/Logvin · 2 pointsr/homeautomation

Well, I live in Phoenix so I don't really deal with rain that much. These ones were installed under an overhang, so they are not getting wet.

I recently purchased this: https://www.amazon.com/gp/product/B07G732B9J/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

I'm moving shortly, and some of the locations will be more in the open. This should help I think.

My philosophy with these guys is... I'll risk it. It dies, It was only $25 :)


The live tracking is customizable too. Notice in the first video there is a black patch on the ground on the left? A cat likes to come by in the early morning sometimes and walk along that wall. I modified the tracking target so it doesnt alert me for movement there, only closer to the door.

u/Pjmacshellback · 2 pointsr/wyzecam

Amazon. It was fairly inexpensive and they seem to be working out great. I have two cameras; both using these covers and mounts.

Link: Aobelieve Outdoor Metal Wall Mount and Weather-Resistant Silicone Birdhouse Cover for Wyze Cam Pan Camera (Black, 1 Pack) https://www.amazon.com/dp/B07L7S24QB/ref=cm_sw_r_cp_api_i_GG5FDbA3PD6JP

u/ragingcomputer · 1 pointr/homeautomation

My comment was really targeted toward OpenHAB. If you're running Wink, I think you'd be better off getting one of these GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener. Amazon reviews are pretty solid and Home Depot was selling them for use with Wink for a while. I believe it comes with a tilt sensor, which is probably easier to use than boogering a regular door sensor on like I did. Probably a solid bet. I would have bought one of these if OpenHAB supported the z-wave barrier class.

As far as the MIMOLite... I can't tell you for sure as I run OpenHAB, but it looks like it should work according to these links: post in reddit /r/homeautomation and Amazon review

I'm using a Go Control / Nortek Controls / Linear WADWAZ-1 to sense my garage door. I snagged one of the WNK01-21KIT kits from Home Depot on sale.

I've also got a Honeywell Ademco 958 overhead door contact on my other door that should work as the door contact listed in fortrezz's diagram linked in my previous comment, if you wanted to sort of wire it.

For Wink, by the time you buy both the mimolite and the door contact (wired or z-wave) you might as well just buy the go controls device and get the benefit of secured z-wave barrier class.

u/rab-byte · 1 pointr/homeautomation

Those are called ‘tilt sensors

Another option is to use a simple contact but you’ll need a GPIO and that till drive up your costs

added links
words

u/celliotth · 1 pointr/homeautomation

Honeywell Ademco 958 Overhead Door Contacts https://www.amazon.com/dp/B0006M1I1W/ref=cm_sw_r_other_awd_rLSPwb43PGDHK

This would be the only thing that would have to be outside the rest could be inside

u/fupluver · 1 pointr/homeautomation

About a year ago I posted on Raspberry Pi projects how to on one I made. I used a Raspberry Pi. Here it is:

I solved your problem in my own application 3 different ways (I love redundancy, I love redundancy) that are completely different than the way you are looking to solve it. So I'm not going to answer your question, I'm going to answer mine and hope it applies to you.

My solution is on a Pi0W with a relay that shorts the switch on a hacked garage remote to open the door. This is also a single button trigger and I believe similar to your application. I heavily modified this solution to create a webpage that allow me to press a button on the screen to trigger the button. http://www.instructables.com/id/Raspberry-Pi-Garage-Door-Opener/

Solution #1 I have a webcam set up in my garage pointing at the garage door. This in itself is a full solution because I can always just look at the feed to monitor the door. But that's not enough for me. The model camera I use: https://www.amazon.com/gp/product/B004P8K24W/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 It has a url which publishes a snapshot of what the camera sees. This url can be embedded in the "button web page" to publish an image of the garage on the same page as the button <img src="url" />. 1-stop convenience. To turn the snapshot into meta-video I refresh the page every 3 seconds <meta http-equiv="refresh" content="3">. Essentially allowing me to press the button and watch the progress of the door. All in one place.

Solution #2: I picked up one of these: https://www.amazon.com/gp/product/B0006M1I1W/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 and again heavily modified this guide: http://www.ryansouthgate.com/2015/08/10/raspberry-pi-door-sensor/ To determine whether the door is open or closed. I run the script at boot in a terminal window and a bonus effect is I can effectively log the door status.

I incorporated this into my webpage by using this: https://www.raspberrypi.org/forums/viewtopic.php?f=37&t=58267

I added this code to the "open" condition to email me if the door is open: http://naelshiab.com/tutorial-send-email-python/

My modifications basically pulled all this information together into my "button web site" Action, view, and response on the door. Basically they were cut and paste and mostly done in HTML.

Finally not sure how new you are to this but there are other factors to get this all to work: OpenVPN - to hide everything behind my firewall and expose none of it to the internet. I vpn in and it's all as if I'm on my home network. no-ip - dynamic dns so I can resolve my vpn to a name rather than an IP which periodically changes.

u/HowDoIDoFinances · 1 pointr/oculus

Opposite corners, up as high as you can, so they're looking down at you seems to work best if you want 360 coverage with 2 sensors. Unfortunately, that'll probably require you to get extension cables, but they aren't that expensive. The front facing setup that Oculus recommends is really fast and really easy, but losing the ability to turn around in VR really hurts the experience, imo.

If you are able to buy a couple extension cables, I'd really consider trying to get them all the way up in a top corner of the room. You may want to consider a third sensor if you really want to go full room scale, too. I have three sensors mounted up high in 3 out of the 4 corners of my room (2 in front, one in back) and tracking is essentially flawless. It's a little bit of extra work to actually mount something to the wall, but it's worth it if you're setting it up for the long run. I used these mounts.

Having extension cables also gives you extra room to work with so that you can properly route the cables in a neat way instead of having them just hanging loose on the wall. I bought some cable concealers and they pretty much blend into the wall, so you really just see the sensor itself. Looks a lot nicer.

u/JoJoIrish · 1 pointr/xboxone

If the Kinect bottom does indeed have 1/4 20 thread...I am spraying something like this off white to match my wall trim on my wainscoting just under the wall mounted TV. Just Amazon search Camera mounts and possible put it right above the TV on the wall, may get you an extra 12 inches space back.

http://www.amazon.com/VideoSecu-Security-Adjustable-Universal-Mounting/dp/B000IDCDZY/ref=sr_1_1?ie=UTF8&qid=1382819536&sr=8-1&keywords=1%2F4+20+Camera+Mount

u/Indiejeanie · 1 pointr/whatisthisthing

You're using it for its intended purpose as a camera mount

u/ShadowedRain · 1 pointr/oculus

I'm using 3 of These without power adapters and a AmazonBasic for my 4th. Cables can be hit and miss, It depends on your rig.
These are the CCTV mounts I'm using for my sensors.

u/th3v3rn · 1 pointr/Vive

Pretty simple really. Just uses a simple tripod mount system. You could even but to cheap tripods from wallmart.

Snake

Simple

u/Liberi_Fatales · 1 pointr/oculus

What i do is use these

https://www.amazon.com/gp/product/B000IDCDZY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

with some of this

https://www.amazon.com/gp/product/B005SRECEU/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Works flawlessly and its nice to have varying lengths of mounts.

The tape also wont rip off paint and stucco like command strips will.

u/Halvus_I · 1 pointr/oculus

You can buy real mounts made for cameras, made out of metal for $9. Comes with full range of motion joints.

https://www.amazon.com/gp/product/B000IDCDZY/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

u/Verlena51 · 1 pointr/oculus

I got my headset used for $299 in like new condition. was used once for a demo
https://www.amazon.com/gp/product/B073X8N1YW/ref=oh_aui_detailpage_o08_s00?ie=UTF8&th=1

3rd Sensor plugged into an USB 2.0 port on computer
https://www.amazon.com/gp/product/B0727WDPX6/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

Rechargeable AA batteries and charger
https://www.amazon.com/gp/product/B00JHKSL1O/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

USB Expansion card
https://www.amazon.com/gp/product/B00B6ZCNGM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Headset and touch wall mount
https://www.amazon.com/gp/product/B0781G75B5/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Wall Mount used for rear left sensor
https://www.amazon.com/gp/product/B06XR8DL7T/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Cable management system
https://www.amazon.com/gp/product/B073P7GJNP/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Mount clip used for front left sensor on shelf
https://www.amazon.com/gp/product/B01MG4D3O5/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

HDMI extension for headset, only one used.
https://www.amazon.com/gp/product/B00JJ519KC/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

2 pack 6 feet USB 3.0 extension cables, one used for front right sensor and one used for headset
https://www.amazon.com/gp/product/B00CFL6ARO/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Sensor ceiling mount used for front right sensor
https://www.amazon.com/gp/product/B000IDCDZY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

3 foot usb 3.0 extension used for front left senor
https://www.amazon.com/gp/product/B00C7S1B4W/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Cleaning Cloths
https://www.amazon.com/gp/product/B00NR9S3EQ/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

Oculus Rift Facial Interface & Foam Replacement Basic Set
https://vrcover.com/product/oculus-rift-facial-interface-foam-replacement-basic-set/

Photo of final setup
https://ibb.co/exkWXx

I have had no issues at all, this setup working very well for me.

u/Fatal__Exception · 1 pointr/xboxone

Depending on how much room is between the TV and the mantle I would mount the Kinect under the TV with this.

http://www.amazon.com/gp/product/B000IDCDZY/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

u/DanDriggs · 1 pointr/oculus

Yessss 100%! I mounted my 2 sensors to the ceiling, and now I'm able to track all the way down to the floor with no issues. Love it. Will definitely install the 3rd sensor the same way.

For anyone wondering what mount I used (idk, I lurk alot and this would help me lol):

https://www.amazon.com/VideoSecu-Adjustable-Mounting-Installation-Surveillance/dp/B001D49TU4/ref=pd_sim_421_1?_encoding=UTF8&pd_rd_i=B001D49TU4&pd_rd_r=PRWR7G0B6X8WPC0RDBTE&pd_rd_w=9Vk3H&pd_rd_wg=dViLD&psc=1&refRID=PRWR7G0B6X8WPC0RDBTE

u/TrevEB · 1 pointr/oculus

The room is 11'x12'
No bed however there is a couch which takes up some valuable space.
I used wall bushings that I sawed partially in half with a dremel so that I could slip the cable into it without having to cut the USB head off. I also had to soak the bushing is boiling water to soften it up a bit for bending. It makes the hole in the ceiling very clean. The hole itself was drilled just wide enough to get the USB head through. I'll post some pics soon of the wires. :)
Here is a list of parts.
Ceiling Mounts
https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1
Wall Bushings
https://www.amazon.com/Single-Feed-Thru-Bushings-package-CIMPLE/dp/B01EKG1K1W/ref=pd_cp_23_3?_encoding=UTF8&pd_rd_i=B01EKG1K1W&pd_rd_r=69VB8HQYJYJ1ABYZDDNH&pd_rd_w=kvX5u&pd_rd_wg=VNk2q&psc=1&refRID=69VB8HQYJYJ1ABYZDDNH
StarTech 4 port PCI Express
https://www.amazon.com/gp/product/B00HJZEA2S/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Cable Matters Active USB 3.0 16 feet
https://www.amazon.com/gp/product/B00DMFB5OK/ref=oh_aui_detailpage_o09_s02?ie=UTF8&psc=1

u/firepixel · 1 pointr/oculus

I just finished playing 15 levels of Brookhaven Experiment (amazing game), 3 sensors is all you need. I have two in the front corners on tri-pods roughly 5 feet from the ground and 8 feet apart angled toward the center of the play space and one rear center mounted 6" down from a 8' celing with this mount approximately 13 feet from the front. I know this isn't the recommended setup, I plan to try a few setups and decide what I like best. I had a 4th sensor on order but I decided to cancel it since 3 sensors works so well. My play space is roughly 9' x 9' right now, the only time I notice any goofiness is when I'm facing one of the rear corners and slowly turning, the handoff from one sensor to the next makes my pistol move in or out about 3-4 inches. It's not noticeable when I'm playing the game, just when I'm slowly rotating to test tracking.

u/immortaldual · 1 pointr/oculus

This is what I went with. It's a 2-pack so I'm ready for when touch comes out.

https://smile.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/genericallyloud · 1 pointr/oculus

Just for variety, this is what I got. https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Its a pack of two, so there's one for when the touch comes out. I've been happy with mine so far.

u/thyturnip · 1 pointr/oculus

I bought these and they've held up with just three thumb tacks since December with zero issues https://www.amazon.com/gp/aw/d/B001D49TU4/ref=yo_ii_img?ie=UTF8&psc=1

u/seevee1 · 1 pointr/oculus
u/xSleepsinclassx · 1 pointr/oculus

I use these:

https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Thumbtacks in the screw holes to mount to the wall with minimal destruction.

u/knexfan0011 · 1 pointr/oculus

The sensors can be unscrewed from the bases, then you can use standard CCTV mounts if that's more convenient for you.
I could not get mine unscrewed though, so ymmv.
Other users have used mounts like these.
I personally built an overhead mount from k'nex that is self supporting and sits on shelves/doorframe, so I didn't have to drill into the wall/ceiling, but something like that can get very time consuming and bulky depending on how big your room is.

u/diminutive_lebowski · 1 pointr/oculus

I've ordered some of these Command Picture Hanging strips and a couple security camera mounts that I'm going to try to use with the Rift's sensor(s).

The picture hanging strips should allow for moving the second sensor from one corner to another if necessary. E.g. game "A" works best with two front mounted sensors but game "B" works best with opposite corner mounted sensors... In theory I should be able to detach a camera and reattach it in the desired location without much fuss and without making a lot of holes in the wall.

u/honeyfage · 1 pointr/oculus

I use these mounts with command strips for my sensors. Two strips per mount and they seem very stable

u/Richard_MF_Nixon · 1 pointr/oculus

I screwed my sensors into these mounts, then used heavy duty velcro on the wall and the back of the mounts to secure them on the walls.

u/pchadrow · 1 pointr/oculus

I'd recommend wall or ceiling mounting them.

Use these: https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

Affordable and can be held in place with thumbtacks, so no drilling worries. Just shorten them to their shortest length and they'll work great

u/hutch_t1 · 1 pointr/oculus

That is correct, I had bought these to mount them upside down on my ceiling, and have one of them on a 2 meter USB 3.0 active extension cable. I've played through several different experiences, and no jumps anymore so far.

https://www.amazon.com/gp/product/B001D49TU4/

I used the below graphic as the basis for my new setup (making sure not to go past the listed measured distances.
http://cdn.uploadvr.com/wp-content/uploads/2016/11/oculus-3-sensor.jpg

u/mikegriffin84 · 1 pointr/oculus

We will have to agree to disagree. Do it right the first time. If you are doing room scale take the 15 minutes it took me to mount my sensors in the corners. It literally took me 15 minutes. Get a latter or stool and hold the sensor mount base up in the corner with about 2 or 3 inches of space from each wall and mark the 3 holes with a marker in each corner. Then go to each corner and drill the 3 holes that are the correct size for the drywall anchors you will use in each corner. Then install the drywall anchors then the mounting plate then screw the sensors to the plates. Then plug in your sensors. Done. Then you don't have to worry about bumping sensors or the table the sensors are on or re-calibrating you setup.

I use these: https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

u/nellj21 · 1 pointr/oculus

Thank you for the suggestion. I went ahead and placed a mount above my computer, but I guess since it's so close and high the tracking is a little wonky. I can mount the sensor back onto it's original mount when i want to do a sit down session. These are the mounts I'm using

https://www.amazon.com/gp/product/B001D49TU4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/IOnceLurketNowIPost · 1 pointr/3Dprinting

I use this one and have glued magnets in various places. It is cheap, convenient, and effective I think.

u/mclamb · 1 pointr/Nest

You can use any standard 1/4" camera mount. There's not really any shortage of options and styles.

https://www.amazon.com/dp/B000X23I22/

https://www.amazon.com/dp/B01A15ZKQC/

https://www.amazon.com/dp/B009AOWF50/

u/iNeedAValidUserName · 1 pointr/buildapcsales

It mounts like this. If you have no top bezel it will cut off your a very small portion. (it is the closer one)

It does have a screw hole for a tripod/mount though so I guess you could use something like this, 3M strips could probably hold it if you can't screw into a wall or anything. here is a customer image from amazon of someone doing something similar

u/XpoopcakesX · 1 pointr/battlestations
u/ProperAbility · 1 pointr/Twitch
u/rtechie1 · 1 pointr/gadgets

Totally doable. But first, have you thought about the logistics of an EXTERNAL camera (because if you need weather resistantce, presumably it's outdoors)? How are you running power to it? How are you connecting it to a network?

That said, you basically have 2 options:

  1. You can buy a standalone device like a Nest Cam and an enclosure, and pay a monthly fee for video recording.

  2. You can buy a cheaper outdoor IP camera, connect it to an "always on" PC or server and use software like ispyconnect to upload video to Google Drive.

    1 is probably more expensive in the long run, 2 is much more complex to set up, and requires an "always on" server.
u/Tyrant2 · 1 pointr/techsupport

Your product - BV-Tech POE-I100 Single Port 19W PoE Injector

Fixed my issue. But now I have to get a non-frankensteined outlet cover.
I got these for my outlet outside on my entryway. But its operational for now.

Dropcases Nest Cam & Dropcam Pro Case Outdoor Enclosure

Nest Cam & Dropcam Pro Outdoor Ball Joint in Black

u/lamuril · 1 pointr/oculus

These are the mounts we used, and a lot cheaper than the ones linked on the wiki: OdiySurveil (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera


We also bought this 3.0 USB Anker port as I was under the impression we would need it and it was recommended on a thread. We actually ended up not needing it, but we still have it available in case we need to free up usb slots. I would double check on other threads that it does indeed work before just taking my word for it, as I haven't tested it yet personally

u/carrotstien · 1 pointr/Vive

hmm, I might use THIS or THIS as a secondary mount point to try to reduce jitter.

u/arnoldstrife · 1 pointr/Vive

It's a standard camera tripod mount. You can use any camera mount.

​

For example, https://www.amazon.com/OdiySurveil-Security-Housing-Bracket-Compatible/dp/B00R96X9DS/

​

But really any mount anything that uses the standard tripod screw.

u/shottogan · 1 pointr/PSVR

https://imgur.com/gallery/qIbQBB5

Retractable with great height, even with this low entertainment block. 😼🎶
Should work with either generation PS4 camera; just remove its stand.

I made one of the mount holes large enough (with a small drill bit.. ideally you'd have the proper bit size 🥴) to fit my TV's bolt. If yours is smaller screen size it may have smaller bolts.

The parts:

u/darealdsisaac · 1 pointr/oculus

USB Extension

USB card (This is the only one I've seen that is recommended. I need it because I don't have enough ports.)

Wallmlounts

Accessories total: $56
Oculus total:$497
Vive total:$500

u/Romthirty · 1 pointr/oculus

https://www.amazon.com/iSaddle-Thread-Double-Sided-Adhesive-Universal/dp/B00QSFKJ8E/ref=sr_1_12?s=photo&ie=UTF8&qid=1481588853&sr=8-12&keywords=saddle+dash+cam+holder

It's an Amazon seller, I ordered 3 of them and only received 2 of them so I can't say I recommend buying from that seller, but I do recommend the product. They are nice and strong, which is unfortunate that I didn't get all 3.

I placed an order for this one for my 3rd sensor:
https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Which is almost the same, but doesn't have the 3M adhesive. I suppose I could buy my own adhesive, or I can use 3 thumb tacks as I've seen people do with these.



u/EarlyVsMidThirties · 1 pointr/oculus

Omall (TM) Metal CCD Security Housing Mount Bracket for CCTV Camera https://www.amazon.com/dp/B00R96X9DS/ref=cm_sw_r_cp_api_Olqsyb7666GDV

Just sold out. But very small and cheap wall mounts.

u/wiljc3 · 1 pointr/skyrimvr

https://www.amazon.com/dp/B00R96X9DS/ref=cm_sw_r_cp_awdb_t1_VgXbBbZGKXSYZ

I stuck them up with two medium size 3M Command strips each instead of drilling in my rental. They've been rock solid since August, so I can recommend this method!

u/Twelvers · 1 pointr/oculus

These worked great for me as far as the mounting goes. The 3M strips did work for ceiling mounting it, even though the bottom isn't flat. Eventually, after a month or so of testing I will probably screw them in.

I'd also invest in some cable hiders because while the mounted sensors look great, the wires look like shit running all around my room lol.

u/HaCutLf · 1 pointr/Vive

If you don't mind hanging it on your wall you can get something like [this] (https://www.amazon.com/gp/aw/d/B00R96X9DS?psc=1&ref=yo_pop_mb_pd_title), or use one of the wall mounts that came with your base stations. You could also use a tripod or something.

u/Phludd · 1 pointr/oculus

I have all 4 of my sensors mounted 7 ft up, I have switched back to only using 3 till I get this issue resolved.

I tried using the cable matters 16ft active USB 3.0 cable for one of my fronts sensors but it wouldnt detect as 3.0, so I swapped it for the 10ft passive one and it worked fine.

Here are the mounts and cable I have had success with:
Mount-https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

10ft USB 3.0 cable-
https://www.amazon.com/gp/product/B00C7SA21U/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/Xalic · 1 pointr/oculus

sure. I bought two of these https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and just used drywall anchors I had to mount then on the wall my computer is on.

u/mav3r1ck92691 · 1 pointr/oculus

So it's tough for your space since it's pretty small. Given the furniture you have that could interfere I would probably place the one camera centered on the wall above your bed up near the ceiling and angled towards the center of your play area, and the other centered above your window near the ceiling.

Generally having them in opposite corners (this is how mine are) would be better, but your cabinets would get in the way. You might have some issues since you will be fairly close to the camera, but I think you can get away with it.

My cameras are mounted using 3m command strips and small camera mounts. I chose this route since I cannot drill into my apartment walls without losing my deposit. I just stuck the strips to the back of the mounts and to the walls. If you choose this route make sure you give the adhesive some time to set before you actually put the camera up (on both the camera mount and the wall).

These are what I used:

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B00LOQMCDM/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1

u/jonesRG · 1 pointr/oculus

Anything that supports a 1/4"-20 thread type. I used these and the extension cable that came with my LeapMotion HMD mount to run the 2 opposing cameras. Works great. There is some random occlusion but I rarely notice it in game, and its only if I'm close to the walls.

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

u/TacticalBeaver · 1 pointr/oculus

I use these and attach them to the ceiling/wall with 3M command strips.

https://www.amazon.com/gp/product/B00R96X9DS/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

u/EarthlyDragon · 1 pointr/oculus

You could just use a security camera mount. Got mine for $7 on amazon

u/rustysawdust · 1 pointr/oculus

There are some good for VR reviews for these ones: https://www.amazon.com/gp/product/B00R96X9DS

u/mrmonkeybat · 1 pointr/oculus

This one is adjustable to all angles and still quite cheap. If you don't want to make holes stuff the back with blu tack, or screw it to a board you can put Command Strips on.

u/Amuro2026 · 1 pointr/Nest

TX and I haven’t had any issue yet with mines. Do you have yours directly out with no cover??? I have mines on top of the garage/ under the roof so it’s always covered from the sun and rain.

If you have yours out with no cover then considere getting this or you might have a defective one.

SDS DS-1250ZJ Universal Sun Rain Shade Camera Cover Shield for Outdoor Camera https://www.amazon.com/dp/B018WJQL0S/ref=cm_sw_r_cp_api_i_bTMpDbXXXK0W0

u/Cgreenman · 1 pointr/oculus

There's a ton of mounts on Amazon, Search for mounts and include oculus in the search. It's just a 1/4 " thread you need anything from a hardware store will work.Here's what I have:https://www.amazon.com/gp/product/B01EL17TNO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

u/draginator · 1 pointr/oculus

I have amazon, it cost me $8.

u/Houndie · 1 pointr/oculus

This was my first wall mounts:

https://www.amazon.com/gp/product/B06XR8DL7T/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

In terms of what they are, they're fine. They attach to the wall with command strips. My problem with them was that the command strips didn't adhere well enough, and kept falling off my wall. I could have bought better command strips I suppose, but I went with something different.

Since I don't have any problem with putting holes in my wall, these were my second wall mounts:

https://www.amazon.com/gp/product/B01HMNJIO6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

So far I've had no problem with these.

u/jello_aka_aron · 1 pointr/oculus

Something like this then stick on walls/ceiling with Command Strips seems to be the best way to go. Maybe some of the Command cable routing hooks as well to keep those all clean and neat looking

u/aenathema · 1 pointr/oculus

Any concern with the command strip not holding?

I just ordered these because they are real cheap:
https://www.amazon.com/gp/product/B01HMNJIO6/

u/UndeadHero · 1 pointr/oculus

I just got these: https://www.amazon.com/gp/product/B01HMNJIO6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Mounted 2 on the ceiling in the front (with duct tape until I can experiment with the setup, holding fine with my one sensor).

In the rear I have this: https://www.amazon.com/gp/product/B00LLM3Z0S/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Which is what I was using previously with my one sensor.

u/Andrewtek · 1 pointr/oculus

I used these ones. They come in a two pack for $12.99. Convenient for a two sensor setup like mine.

u/Saerain · 1 pointr/oculus

Nice, they look comparable to the ones I bought for $12 each.

u/OwThatHertz · 1 pointr/oculus

> You could skip steps 1, 2, 4, 5, and 6 and save ~$20 by just buying a couple tripod clamp mounts: https://www.amazon.com/BESTEAM-Tripod-Camera-Reflector-Backdrop/dp/B00Y4FVLYG/

You could indeed! However, the gripping pressure of those is far less and they won't open up as wide as the ones I mentioned. Although the steps I listed sound complex, actual assembly takes literally about 2 minutes for both clamps.

> Or if you're comfortable with putting screws in your wall you could save ~$30 by using a camera wall mount: https://www.amazon.com/FastSnail-Security-Adjustable-Interface-Standard/dp/B01M1CDI8G/

Correct! however, the mini ball heads present in those mounts are very poor quality and will wear out over time. I have had those Giottos mini ball heads for half a decade and they're still as flexible and grippy as when I bought them.

I mentioned this earlier, but you can definitely get cheaper parts than the ones I listed. However, they will also definitely be inferior.

u/Robert_Cutty · 1 pointr/orbi

Thanks for replying. That’s exactly what I was thinking. Here’s the mount I was considering.

Arlo Camera Mount

It would keep the orbi upright. They definitely look like camera mount screws but I didn’t know if they were standard sizes.

u/Bran04don · 1 pointr/oculus

I bought these but they are cheaply built, plastic mounts with really bad screws but it did the job and as long as I leave them alone now they will last.

Also I bought from Amazon UK
Shappy 3 Pack Security Wall Mount Indoor and Outdoor Mount Bracket Adjustable for Wyze Cam Pan 1080p Pan, Arlo Pro 2, Arlo Pro, Arlo, Arlo Cam and Other Compatible Models (Black) https://www.amazon.co.uk/dp/B01N4IOQP6/ref=cm_sw_r_cp_apa_i_sSDBCbV771MDH

u/tbonge · 1 pointr/oculus
u/IsaacNewtongue · 1 pointr/oculus

I use these camera wall mounts from Amazon in my room, and they look a lot nicer than the generic L brackets I bought the first time. They come in sets, with cheap but sufficient wall anchors, and are inexpensive. I have mine coming from the ceiling, but they also work well on the walls.

If those are no good, just search your preferred store or site with the same keywords as I did above, in blue. You'll get tons of results :)

Something worth mentioning is that the cameras don't have the usual 90° fov, it's more like 120°. There's a free utility Sensor Bounds that will show you the coverage your cameras are getting from inside VR, I have found it helpful.

u/atvking · 1 pointr/wyzecam

This is pretty much what I did:

  1. Wyze Cam mounted to soffit using this mount with USB power cord run into attic vent
  2. USB plugged into to ethernet adapter (not this exact one but same idea)
  3. Ethernet cord run accross attic and down wall into basement
  4. Ethernet adapted back to USB
  5. Adapter plugged into a 5000mAh cell phone powerbank for battery backup
  6. Powerbank plugged into wall using included Wyze Cam power brick.

    I'm using a 32gb class 10 micro sd (can't remember the brand) and so far everything has held up great in a Canadian winter. We've had all kinds of different weather from rain to ice to snow (and lots of it)! Temps ranging from 15 celsius to -25 celsius.


u/Elasion · 1 pointr/DataHoarder

Yah I’ve seen ones like that, something like this looks more protective imo (https://www.amazon.com/dp/B07DW971RT/ref=cm_sw_r_cp_api_u5vJBb3QKSA7N)

I wouldn’t leave it somewhere where rain/snow is going to hit it (I’m in so cal so not much of an issue) but leaving it under an eve would be fine imo. With this one the main issue is the power cable is exposed, putting some silicone around that outlet, connection and even camera hole would make it pretty ideal imo.

u/mightyarrow · 1 pointr/wyzecam

u/DrFunStuffs, I just finished mounting a weatherproof housed V2 onto my vinyl siding - see here. I did a combination of screwing the housing mounts into the siding + using an installer bit to drill a hole through the house.

​

Then ran cable through and sealed up with silicone caulk on both sides.

u/sgorneau · 1 pointr/wyzecam
  1. Yes .. these and I love them https://www.amazon.com/gp/product/B07G732B9J/ref=oh_aui_search_asin_title?ie=UTF8&psc=1

  2. Nope! And this past summer I've been through 100°F days, full sun, 60MPH winds, sideways 3" rain storms ... and now this winter -20°F nights, snow, ice, rain .... rain that then flash freezes.

  3. Each exterior camera is mounted to window trim. The included USB cables running through the window to an outlet nearby. The flat cable makes this practical because it doesn't interfere with the window weather stripping.

  4. a) Mounted to first story window exterior trim, covered front porch b) mounted to second story window exterior trim looking down at driveway, enclosure fully exposed to elements c) mounted to second story window exterior trim looking down at pool, enclosure fully exposed to elements d) mounted to wall in garage

  5. Patriot 32GB SD in each for all-time recording, sending clips to the cloud. Waiting to hear about RTSP to make a decision on the upcoming storage device. (really, really hoping for RTSP)
u/chailatte_gal · 1 pointr/wyzecam
  1. Yes using an enclosure. See my set up here. Link go Amazon mounts I ordered. They are not water proof but help keep water off. I mounted under eaves to help.

  2. No issue with elements. Has been -32F air temp and -55 WC and no issues.

  3. Powering by using a light socket to plug adapter (last photo in link above).

  4. Attaches under eaves. I have 2 cameras mounted outside one at each door.

  5. Using Samsung Evo 32 GB SD card. 32 GB IS max it can take I believe.
u/AWooeCbUZFLCrurUyIA8 · 1 pointr/wyzecam

not so much. Been using one of these Wyze Cam Pan Protective Case. I do have it outside but under a roof, so it isn't directly out where water can hit the top of it. There's quite a bit of rain around me and I think this thing has been doing well. Do note (if you care to wait) that according to the Wyze CEO (in a recent email) that they are planning on an outdoor model soon.

u/xantharia · 1 pointr/securitycameras

You'll need the following:

u/KC_Buddyl33 · 1 pointr/wyzecam

I have two pan and scan cameras outside.

  1. I am using these enclosures: https://www.amazon.com/gp/product/B07GCX831T/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
  2. I have not lost one to the elements and we've experienced -30F wind chills, ice, and snow.
  3. Via a long USB that is carefully hidden behind the gutters and landscaping.
  4. One is mounted under the roof soffit above the garage and the other under the roof of my back deck.
  5. I have 32GB microSD cards in the cameras.
u/tydygy · 1 pointr/wyzecam

Do you have a protective case similar to the one in the link below on it? I had the white one and it looked almost exactly like this at night. If not, possibly just a very near by source of reflection? This looks like IR back scatter and based on the case I used, they are pretty sensitive to it. I first painted the case flat black, which resolved the IR issue for me short term. I eventually replaced the case with black ones that do not have the flap on the sides, as that seems to be where the reflections was mostly coming from. If you do not have a case on it, look for anything that is close to either side of the camera that might be reflecting the IR light. If not, I suspect one of the IR LEDs is misaligned. Maybe a defective unit?

https://smile.amazon.com/gp/product/B07GCX831T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Edit: to fix spelling and to say that I do NOT recommend the linked case, especially not the white one if you plan to use IR for night recording. Spray paint all flaked off in a couple of days.

u/DrkMith · 0 pointsr/Nest

SDS DS-1250ZJ Universal Sun Rain Shade Camera Cover Shield for Outdoor Camera https://www.amazon.com/dp/B018WJQL0S/ref=cm_sw_r_cp_apa_i_CCknDbBWVJ8S9