Best collectible toys according to redditors

We found 4,546 Reddit comments discussing the best collectible toys. We ranked the 2,048 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page


Statue, maquette & bust action figures
Card cases and storage sleeves

Top Reddit comments about Collectible Toys:

u/Xonim · 36 pointsr/boardgames

You can get some collectible coin holder pages and just put the tiles in those. It's much easier to just pass the pages than look at individual "stacks" of tiles. These worked great.

u/edhfan · 26 pointsr/magicTCG

So I think that a pauper cube sounds like what you want to do. This is an all-commons cube, which, like you say, will allow fun, well-balanced play. It'll also be a bit lower complexity than a power cube would be, which is better for new players (as opposed to things like putting Eldrazi under a Mimic Vat).

Here's a link to an article about pauper cube with a link to a list at the bottom of the article.

The cards themselves will likely cost less than $100 - you may already have a good number of them - and then you would just need sleeves. I recommend double sleeving with something like the KMC Perfect Size inner sleeves and the KMC Hyper Matte sleeves outside. This will keep your cards in good condition (yes, they're commons, but it's nice if they stay nice looking. Some people also choose to foil out their pauper cube, since it's a lot cheaper to do than foiling out a powered or higher-powered cube, and double sleeving will prevent bending).

All in all for probably less than $200 you can make a fun pauper cube. Good luck!

u/carbon480 · 22 pointsr/mtgcube

KMC Hyper Mattes are what I swear by, and I was a staunch supporter of Dragon Shields for years.

u/overthemountain · 22 pointsr/KingdomDeath

A cheaper option would be to buy a pack of coin protectors. They are like $9 for a pack of 20 4x5 sheets. You can take 4 of them and cut them down to 3x3 or use the excess area to hold gear you're not currently using. If you don't like the floppiness, mount it to something stiffer.

As an added bonus you can also now easily organize all your gear cards as they easily hold multiples of the same card in each slot. Throw them in a binder, add some tabs for each crafting location. This makes it much easier to look at your gear cards when trying to figure out what to get. It also eliminates the need to sleeve gear cards as you just remove them from one sleeve and put them in the next.

I have the core game, Lion God, Sun Stalker, Gorm, and Slenderman gear cards in these. With 4 sheets reserved for survivors I still have 6 sheets left.

u/Holos620 · 16 pointsr/magicTCG

It's less expensive for me on shipping included.

2 Perfect size Cad$10.70 or Usd$7.83

3 Hyper mat Cad$20.49 or Usd$15

Total on Usd$22.83 vs Usd$26.34 on massdrop

u/ManWithQuestions9 · 16 pointsr/pkmntcgcollections

Thanks! The binder is just a standard red Avery binder - I got it all on Amazon!

- Red Binder

- Black Pin Pages

- Coin Holders

- Coin Pages


u/FizzyDragon · 15 pointsr/Parenting

I keep all my DS and 3DS games loose in a small box (actually it's an old Pokémon card collector tin).

Never had any game break because of this. It's ok if they rattle around a little as long as the container is clean (not dusty or full
of sand or something)

I read you have more than one kid using the games. I'd take all the cartridges out of the cases, get a binder with some of the 9-card sheet clear protectors and stick a cart in each card slot. Then they don't have to be in any particular order because kids will be able to just turn the pages and see all the labels easily.

Getting punished for this sounds ridiculous to me, my parents gave us games, back the the original gameboy days, and it was on us to keep them sorted and safe and our fault if they got lost.

Edit: mobile spelling

u/Ryuuzaki_L · 15 pointsr/mtgcube

Cube list can be found here:

Went all out with the conspiracy sideboard and even got tokens sleeved. Next step I think I'll get some cheaper full art lands and then think of how to upgrade it with WotS after it gets played a few times.

Definitely cost a bit more than the original target of $100. I think I spent around $200 in total for the cards, lands, and tokens. 95% of which I was able to get in under two weeks from CardSphere. I was almost instantly able to get everything I needed from there for 80% of the index prices. Tokens we're like 30%. Im sure I could have gone even lower if I wanted to wait a little longer. Definitely recommend checking them out.

This is my first real paper collection so I decided a cheap budgetish cube would be a good start to play with friends. I was going to try the Card Kingdom starter cube, but this one just seemed like it was well worth the extra money.

Edit: Case is a Quiver. Fits the 360 card cube, 15 card Conspiracy card sideboard, 80+ tokens, and 35 of each land with dividers almost perfectly. Really wanted to go with the Dex Protection Supreme Game Chest but I couldn't find any colors I liked. Im happy I didn't though. While it definitely looks a lot better, I absolutely love this case. Super easy to transport and the cards don't budge. I really don't have any complaints and it was a fraction of the cost.

Quiver Black Playing Card Case -...

Now I'm just waiting on my cubeamajigs to get here.

u/SexiasMaximus · 14 pointsr/magicTCG

Let's start with the big picture. You're going to want somewhere to keep your cards.

For the ones at home, something like this should do just fine. It keeps things mostly organized, is rather inexpensive, and will last. You can make inserts to help subdivide more if needed.

Next, you're going to want something to carry your cards in for the go. Many people just use backpacks or messenger bags, but there are [specialty bags] ( that you can purchase as well.

To keep you decks organized and protected while in the bag, [deck boxes] ( are the way to go. They make things nice and modular and will protect your cards even if you just have a normal backpack.

For your trades, if you go that route, a [binder] ( and some [sleeve pages] ( should do fine.

Finally, your decks. Sleeves! Sleeves! Sleeves! and Sleeves! The cards in your decks are going to see the most use so you're going to want to protect them the best. I've found that [Dragon Shield] ( and [Ultra Pro] ( sleeves are excellent for their value and use them on several of my decks. Cards in your deck are often your most powerful and you're going to want to keep them in the best shape possible.

Many people, myself included, will argue for getting a [Play Mat] ( so that you sleeves won't get torn up as much and will last longer, but it's not absolutely essential.

Oh! I forgot dice! My group have found that dice are the easiest way to keep track of things like life totals, counters, and about everything else you need a number for. Having your own are absolutely essential, there's always someone you can borrow from, but they're a great thing to have around.

edit One thing I want to point out is that everything there can be customized to fit your particular style, so have fun! The way you carry and present your cards says as much about you as the cards themselves!

u/Crazyeyes24 · 13 pointsr/pkmntcg

I decided to start collecting with Steam Siege and Generations. Figuring out the best way to keep stuff was daunting at first. After going through all of TCC's videos and lurking in this and the collection sub, this is the system I settled on:

-Each Set gets its own 1" binder. Be sure to use a D-ring style so the pages sit evenly on top of each other. I like these from Office Max/Depot because they open and close easily and have a pin-hole style of lock so it ensures alignment of the rings and minimizes catching pages.

--In the inside pocket of the cover, I put the Trainer's Guide from the ETB of the set, fits nicely in the larger of the 2 pockets. Make sure you don't put anything in the back cover's pockets, as that could make an uneven surface for your cards to rest on if you leave the binders on their sides.

--Then, each binder starts with a 4-pocket binder sheet to store one of each booster art for the set.

--After the booster page, I organize the cards by set number, starting with the core set followed by the parallel set. I use Ultra pro's 18 pocket side loading card pages for storing the cards. Pretty much hands down the best. I prefer the black backing and only want to put 1 card in each pocket. Nice fit, though I noticed some scratches/imperfections in clarity on the batch I got. Not a big deal for me, as they are still very durable, but may be for others.

---Basic cards go into a KMC perfect fit sleeve upside-down and then into the binder page. Good protection, tight fit, not too much cost. KMC's are pretty universally accepted as the best. As some have said, too tight a fit could damage a card, too loose and it wont fit for double sleeving. I've never had a KMC perfect fit that was too tight, maybe a little loose, but never tight that it could cause damage. Looser ones I just put to the side for storing non-foil cards and not for double sleeving.

---Any foil card (Holos, parallels, URs, SRs, etc.) go into a KMC perfect fit upside down, and then into a black KMC Hyper Mat before going into the binder. I usually double sleeve a stack of cards and then put them into a tight deck box or under a stack of books for a week or so to squeeze out all the air before putting them into the binder.

-Any extra cards then get stored in the ETB for the set they are from. Organize them however you like, but I keep one section for a playset of up to 4 of each card, and any copies above that go into a second 'trash/trade' section. Eventually I may put the playsets of 4 cards into penny sleeves just to keep things sorted more easily, but I don't have too much surplus yet to warrant it. Again, I always keep things ordered by set number.

--Here, any extra foil cards will get sleeved. Right now I am just using Ultra Pro's deck protectors since I ran out of perfect fits, but really don't like how they have the stippled surface on the inside of the sleeve as well. I can feel it scratching the edges/back of the card each time I sleeve one. Particularly valuable rares or holos may get double sleeved for better protection, but still get stored in the box.

-For actual play, I would stick to KMC hyper mats. Good shuffle feel, and last longer than the Ultra Pro's. I played a game with a buddy with my deck sleeved in the Ultra pro's and loved the shuffle feel, but the sleeves just break too easily if you catch a corner. Also they aren't opaque, KMC's are definitely the better looking.

u/daniedoo247 · 13 pointsr/CrossStitch

I'm on mobile, so forgive the utter lack of formatting. I was looking for a zipper, three ring binder, a spot of graph paper pads, and big enough pockets so I didn't have to squeeze things in and out. See below for what I got.

The portfolio: K.DESIGNS- Zippered Leather...

The sleeves:
Full page: 200-Pack Standard (Not Economy)...
Half page: BCW 2-Pocket Clear Protective...
Trading card page: Ultra Pro 9-Pocket Silver Series...

u/SliderHMSS · 13 pointsr/dominion

The base cards is treasure, victory, and curse cards.

u/jax12622 · 11 pointsr/Magicdeckbuilding

Might want to post this on the actual /r/magicTCG page. If he plays casually you could buy him several products. The Deck Builders Toolkit is a good start, as it comes with a bunch of cards. You could also buy him a "fat pack" of the newest set, Khans of Tarkir, which comes with 9 packs.

The other things you listed could be okay, but there could be a lot of repeats which your son might not like. I have absolutely no experience with the bulk sets at all, so take the risk if you want to. I would stick with the first one you linked though, as it's from a trustworthy seller.

Depending on your budget, you could get the Toolkit, the fat pack, a pack of sleeves, and a good deck box.

u/bubbafry · 11 pointsr/magicTCG

I bet he will find several thousand more dollars worth of cards in there. He should invest in some sleeves and card holders in order to protect his cards. I prefer to double sleeve, then put it in a magic card binder (NOT a regular 3 ring binder) or in a top loaders.

KMC Perfect Fit sleeves

KMC Hyper Matte Playing Sleeves

Rigid Top Loaders


You take the card and (carefully) put the card upside down into the Perfect Fit sleeves. The card should fit snugly in there. Then you put the card into the Playing Sleeve with the opening of the Perfect Fit sleeve at the bottom. Then put the whole thing into a top loader.

So Card -> Perfect Fit sleeve -> Playing Sleeve -> Top Loader


Good luck!.. And no more bend testing for all that is holy, lol.


Edit to add: if they are in extremely good condition (like they look perfect straight out of the pack), it may be best to avoid the Perfect Fit because you can cause very small nicks in the corners if you're not careful putting them in which can affect their grade, but if they look like the Black Lotus you have there, then it's probably not a huge concern.

u/Slurmsmackenzie8 · 11 pointsr/mtgcube

I use the KMC Card Barrier Box 1000 for my cubes. It fits 430 single sleeved cards perfectly on the top row and leaves plenty of space for tokens, lands, dice, and miscellaneous.

u/chickeninferno · 11 pointsr/KingdomDeath

Since most of the others have given you the right answers to your questions, I thought I would elaborate more on how you could store your game as well as bling it out. I have around 6 completed campaigns at this point (so maybe 500ish hours in…holy crap that’s a lot more than I expected)

Here’s what my setup looks like:

Card Storage and Organization: I found the broken token card organizer ( in a hobby lobby art supply case ( works awesome to store the cards. Hobby lobby routinely has coupons for 50% off of one item. I think I spent $20 for my case. One case will hold all of the non-gear cards for the base game (sleeved) and all of the current expansions. I bought a second one of these cases to store all of the terran, settlement events, settlement locations, gear grids, rulebooks, etc. I no longer use the original box at all.
For the gear cards, I use a coin sleeve sheet ( in a three ring binder.

For sleeves, I primarily used FFG Grey sleeves but I did back the Mage Sleeves kickstarter so I used those for the gear cards, settlement events, and settlement locations (there are likely other places to get them)

For tokens, I used these ( 28mm coin holders.
For holding them on the table, I used (

Highly recommend having these survival action tokens for each player as well, because it makes it very clear if you have already used the survival actions or not – There are not tokens for this in the game, these are purely helpful addons. (
Colored rings around the bases is also really helpful for remembering which character is which. The ones I purchased are no longer for sale but something like this (

To hold the gear grids together, these are awesome but pricey (

I would also use these remaster card sheets printed on thick paper ( - Your first campaign will be people of the lantern - I would recommend starting off with around 12 of the character sheets.

u/Headlesssmurf · 10 pointsr/MoviePassClub

So I stumbled upon this on Amazon searching for a way to store my gameboy games. Figured this would get some use here.

u/omniczech · 9 pointsr/mtgcube

The KMC 1000 is a great buy. Solid and HUGE. Fits a 540 double sleeved + lands pretty well! You can find it here for cheap.

u/MettaWorldWarTwo · 9 pointsr/magicTCG

I get the boxes on Amazon for $15 each and they are my preferred storage container for commons and uncommons. I looked at the dimensions and wanted to see how Planechase would fit in the box. Turns out it fits very nicely. I haven't sleeved the tokens yet. I am also going to get a dual flip box to store the planar cards for when I don't want to treat it as a board game.

Chaos Reigns upside down was a mistake but I'm going to embrace it. Also the cardboard boxes were pretty beaten up and the planar cards have lots of scuffs on the edges. All in all I'm not impressed with the overall quality but I'll have fun with the new wrench in the gears of Magic games.

u/kodemage · 9 pointsr/magicTCG

So, here's all the details on how people store Magic cards meant to be played, with links.

The gold standard for the number of Magic cards to store is 75 or 100 double sleeved cards. As long as your container can store this many cards in one section it will be at least useful to the owner. Additionally, no one really likes storing their cards flat like your current box. Cards are much, much easier to retrieve from the container if stored edge on (top or sides exposed as opposed to your front or back, look at the pictures below).

The Boulder deck box by Ultimate guard holds exactly the preferred number of cards, down to sub millimeter tolerance. 100 cards and 75 cards

Ultra pro makes a pretty ubiquitous soft plastic box for 75 cards and 100 cards which does offer a little more wiggle room.

Ultimate guard makes nearly identical boxes. 75 cards, 100 cards.

They call their 75 card boxes 80 card boxes but that's referring to single sleeving and even single sleevers tend to appreciate the extra space for a few ancillary cards like tokens.

Also, we do not double sleeve with penny sleeves but inverted(open end at bottom of card) perfect^1 fit^2 sleeves and with regular^1 sleeves^2 over that.

Being able to hold cards is great but there is also some benefit to being able to hold a whole deck box. The Arkhive is a popular example. It holds snugly 5 x 75 card boulders and 4 x 100 card boulders. It also holds soft plastic boxes but less precisely.

When storing dice they are stored separately from cards. Ultra Pro, Ultimate Guard

u/Castaras · 9 pointsr/boardgames

I still love Dominion. Especially with some of the more interesting expansions, but even default Dominion, or Dominion: Intrigue (iirc you can get both of these with the basic coin and victory point cards) is a lot of fun, with a lot of replayability. And each expansion increases the interesting combinations exponentially.

Personally, if you go for Dominion, I'd recommend going for the original set, Intrigue, or the "generic" base set + Dark Ages. Intrigue and Dark Ages are my favourite dominion sets, but the original Dominon set is best for a baseline cardset.

u/SirMontego · 8 pointsr/Catan
u/jeosan · 8 pointsr/mtgfinance

KMC Perfect Fit huge price spike: $100,000 for 3 packs

u/djlawrence3557 · 8 pointsr/mtgcube

I've been using one of these for my vintage/powered cube. I keep the lands separate in a fatpack box

u/EvilGenius007 · 8 pointsr/magicTCG

As regards #3, try the KMC 1000 Card Box for an affordable interim option. Here's the TCC review.

u/1D13 · 8 pointsr/DungeonsAndDragons

There are these bucket of figures that are great, and super cheap for how many you get.






And so on. Super cheap. Tons of figures, less than $20 for each set.

u/nfsrookie · 8 pointsr/steinsgate

Yes it is. I own the same one brother!

Amen to best girl.

Still thinking about buying this one aswell tho. My heart says yes, but my wallet says no.

u/nebulatr0n · 7 pointsr/EDH

This box is amazing. I hold all my sleeved EDH decks, dice, tokens, sideboard, trades all in one lightweight waterproof see through container.

u/DaveLambert · 7 pointsr/cardsagainsthumanity

How about 1000 sleeves for $8.95? These are the ones I use on my almost 3000 CAH cards (which reminds me, I'll soon need to order a 4th round of them...).

u/beSmrter · 7 pointsr/boardgames

Mayday ''Standards'' and Ultimate Guard ''Premium'' are some almost-a-penny soft sleeve lines. But I cannot honestly recommend using soft sleeves.

KMC Perfect Fits/Size are a touch more sturdy and thick, but still relatively thin. I can recommend these, but they are meant to be the inner when double sleeving, so they won't totally cover the top edge of the card though.

However, my method is use proper sleeves and toss out the inserts and if necessary move to deck boxes. Options include small, medium, large, also large. Links for example. May not represent the best price and certainly do not represent the only options.

Edit: Obligatory BGG Card Sleeve Sizes for games link. A great resource.

u/Brawler_1337 · 7 pointsr/magicTCG

This thing can hold a sleeved planar deck if you take out the insert. I'm not sure how many it can hold, though. I have a 40-card planar deck, and it fits in with plenty of room to put in the cards I didn't include unsleeved. Don't know if it will fit 86 sleeves cards.

Also, if you want to get a little more bang for your buck, you might be able to find a Duel Deck Box combo pack on discount. The outer box is essentially the oversized deck box.

u/SoneEv · 7 pointsr/magicTCG

You can buy Perfect Fit sleeves in bulk

KMC 100 Card Barrier PERFECT SIZE (10 packs/Total 1000)

u/Four_s0uls · 7 pointsr/FourSouls

Can easily hold another 100-200 cards so we are covered for at least another expansion pack if not 2. Very durable, feels super high quality and even a bit fancy. Waterproof material and zipper covers. Very confident in the protection this case provides. 5 Spacers are velcro and can be placed as you please to organize however you would like and also to keep you sections of cards as snug as you would like. Also has 2 seperate corners pads/spacers so you don't have to worry about the slightly rounded edges of the case damaging your cards. Also has another 4 seperate hard plastic dividers incase you find a use for them. Right not I am using them to take up more space and make things even more snug. To complete it all it has a nice strap to carry it over your shoulder. Fantastic! Overall, 10/10 If anyone would like more pics of something just ask! Link below

Quiver Black Playing Card Case - Carrying Deck Case with PU Leather Exterior with Double Zipper, Dividers, Hand & Shoulder Strap - Fits up to 1300 Cards - Deck Box Compatible + 100 Card Sleeves

u/scd · 7 pointsr/Netrunner

Two suggestions:

Since you just started playing, the UltraPro Tower is great to just store two decks and some tokens. Comes in a ton of colors, is very durable, and holds what you need. The best for the price (around $10):

If you're wanting to bring multiple decks to casual play nights or similar events, you might want to consider investing in something that will let you bring multiple Corp and Runner decks. I like the Ultimate Guard Twin Flip n' Tray:

Comes in multiple colors, the magnetic latches are strong, and is a great way to carry four decks (or five, since I take out the token tray and slip in another deck).


The Quiver. I've filled my Quiver up with upwards of 8 constructed decks and a bunch of extras. It holds my cube at the moment, but is a great case if you find yourself wanting to bring lots of cards anywhere:

u/troy_destroy · 6 pointsr/magicTCG

These are some good inexpensive options.

Ultimate Guard Stack n Safe: hold 6 decks sleeved and has nice dividers
Stack 'n' Safe Deck Box (480 Cards)

KMC card barrier: has a better latch than the Ultimate Guard but the dividers aren't as good.
Card Box 1000

u/Rascalcs · 6 pointsr/somethingimade

It's super simple to make! The bobble head figure is about $9 on amazon. Cut out the plastic in the top of the head and removed the spring mechanism from the bottom. Used the cut-out from the top to plug the hole in the bottom and secured it all with hot glue. Then just bought a $2 miniature succulent plant from the grocery store and transferred it in. The plant looked like this one.

u/fudgebug · 6 pointsr/magicTCG

I like these a lot, and I think it fits the bill: Card Box 1000

u/ZToups · 6 pointsr/magicTCG

It's not that hard to modify the box to prevent it damaging the cards though honestly its not worth the effort when you can buy a better storage box for less than $20 (

u/anotherguy818 · 6 pointsr/pkmntcgcollections

KMC Perfect Fit are sleeves that are designed to fit perfectly on normal sized cards, and thus work for Pokemon cards. They will thicken them up a little bit. They are completely transparent (no words, markings, or anything else on the sleeve), just a clear, colourless sleeve. They are very good quality.

Here they are on Canadian Amazon (would be cheaper on American if you live in the US):

u/insert_unique_userid · 6 pointsr/KingdomDeath

I really like the Docsmagic ones:

I’ve ordered 2 separate times and have received my order very quickly. The sleeves are premium and not flimsy at all. As a plus, they even fit in these binder pages:

u/kataztrophik · 6 pointsr/MoviePassClub

I just started collecting and organizing my stubs as well.

I'm a little paranoid Moviepass will require me to produce an old ticket stub or receipt so I've saved every single one thus far. I figured I might as well make it look nice if I'm going to be saving them anyways. Could be fun to reflect on my movie watching adventure if Moviepass ever ends up dying.

I'm using these that were linked in that other thread a little while back.

u/Angerman5000 · 6 pointsr/XWingTMG

You can get sheets made for coin collections that are perfect. 2-inch squares, like this one:

u/nevermind4790 · 6 pointsr/vinyl

I use BCW sleeves. They're cheap and get the job done.

u/bauss9027 · 6 pointsr/EDH

Ultra Pro Flip Box I highly recommend these, as they perfectly fit 100 sleeved cards and can fit a top loader with your commander to make them nice and snug. Not only that, but they look awesome! 100% worth it

u/PWH187 · 6 pointsr/GameboyAdvance

Well it won't work for the manuals but I keep mine in a binder using the trading card sleeves. You can fit 2 per slot, or 18 per page.

Edit: You can also fit one GB/GBC cart per slot if you have any of those to store as well.

u/Milinn · 5 pointsr/mtgcube

I don't have one personally (I also have the supreme game chest and really love it,) you could check out the KMC 1000 card box. In my research, in terms of cost/weight, it seems tricky to beat.

u/acs14 · 5 pointsr/coins

I almost exclusively collect foreign coins, and I use the 2x2 cardboard flips for all of them worth displaying. I keep the 2x2s in sheets like these in a big binder. What kind of foreign coins do you have? I imagine that they make ones sized specifically to different currencies, but I just use the US sizes and approximate: for example, a turn of the century Russian 2 kopek coin is a few mm smaller in diameter than a US quarter, so it goes in a quarter-sized flip.

u/alvin_sanity · 5 pointsr/XWingTMG

I use these ( for both dials and bases and like it very much.

It makes it a lot easier to find the stuff you need.

It's relatively easy to put things in and take them out. The one caveat is that it's sometimes too easy for parts to fall out. As long as you store your binder and travel with it upright things should be fine.

u/sampsans-ape-spray · 5 pointsr/vinyl

For inner, I prefer DisKeeper IIs. But they often go out of stock on Amazon when I need them. MoFis are great too, though a bit more expensive. My current batch are these:

And they're OK. Don't hate them. Don't love them.

As for outers, I use the BCW ones:

Can't beat the price on those. They are thin, but that's my preference. They fit most thicker gatefolds as well.

u/Darth_Meatloaf · 5 pointsr/EDH

I have a fat pack box to carry some of it, but I also have three of these to hold my decks. It says they are sized for UltraPro, but I can confirm that a deck sleeved in Dragon Shields, which are slightly thicker than the UltraPro sleeves, fit just fine.

u/RattyJackOLantern · 5 pointsr/rpg

If you're wanting to make a bunch you could just print them out. I like Wyloch's Method for paper minis (using binder clips for the base as OP does above) which makes them pretty durable, though probably not as durable as OP's. You can store/transport them in a binder with trading card binder pages like this

There are also a lot simpler/quicker print'n play methods you can make or buy as well but generally not as durable.

u/rememberese · 5 pointsr/Pathfinder_RPG

Our campaign uses these: printed on cardstock and then fitted into plastic card collector's pages. We have bought many packages of these: and fit them in 3-ring binders.

I play a bard, we have a cleric, and a ranger and they all serve really well. Sometimes the website doesn't have some of the spells, but there is a template to type up your own afaik.

u/Chrishenanigans · 5 pointsr/dominion

The Treasuries were printed all with gold coloring because that's the card type color, no different than white denoting Actions, green denoting Victories (and alt-Victories), blue denoting Reactions, and orange denoting Durations. This will make more sense when you get expansions that have alternative Treasuries such as Harem and the Prosperity cards, where the type color is definitely needed.

Cards within a type are always differentiated by their artwork, which is why the new, standalone set of base cards now print Copper, Silver, and Gold with pictures of, well, Copper, Silver, and Gold.

u/JTRoberts · 5 pointsr/baseballcards

If Cecchini or Lopez turn into anything, those '87 Style Inserts are fairly popular (the Judge and Benintendi versions go for $10-20 right now), but that's more a waiting game.

You might be able to get a ton for that Machado autograph, though. Great pull.

Edit: If you haven't already, invest in a couple penny sleeves and plastic top loaders to keep them safe, especially the Machado.

Here are a couple amazon links for what I use:

u/Sto88 · 5 pointsr/Gloomhaven

Ultra Pro. Like $1.50 per 100 and fit ability cards great. Not too sticky either, but still make mashing cards together for shuffling easy. They are a tad bit taller than the cards if that will bother you at all, but there's not really any downside other than aesthetics.

u/trunk_slamchest · 5 pointsr/tf2

no they didnt come with stands, unfortunately. i bought a pack of these with them.

theyre good enough. you can set the figures in some cool poses, but nothing extreme. 7 out of 11.

theres only one foot hole on each stand though, even though the packaging makes it look like theres 3. its off to the side, but the base is wide enough where they dont lose balance at all.

u/OurNationIsHacked · 5 pointsr/trees
u/iyva · 5 pointsr/AnimalCrossing

I use these card sleeves. I love them because they fit perfectly to the card and it doesn't move around inside.

I personally prefer to slip the card in upside down so the top of the card is touching the bottom of the sleeve.

If I'm going to be scanning a lot of cards in my game (or mailing them), I use anything similar to these top loaders.

For a binder I am currently using a few of these ultra pro 4-pocket binders until I have all of the official binders here.

u/Mutterfudder · 5 pointsr/dropmix

I’ve been using the following products: as a general carrying case for all my cards. It has enough room for cards and has some nice Velcro dividers. For premade decks, I use these:

The deck sleeves fit in the case a little snug, but they don’t bend the cards Best I can tell. So far satisfied with my purchase.

u/Rawrgodzilla · 5 pointsr/magicTCG

Quiver deck box holds 6 double sleeved commander decks. Source I own two one for my cube and one to hold my commander decks. A back pack for the rest of stuff.

u/BlueSapphyre · 4 pointsr/boardgames

I'll add to /u/mattc286 and say you don't even need intrigue or core set. You could just grab the base cards, which provides all the treasures and victory cards only.

u/feh1325 · 4 pointsr/magicTCG

Spend a couple more bucks and get these sleeves. They'll last longer.

Also, forget the deckbox and the gift card and get him a custom playmat from here.

u/Charizard9000 · 4 pointsr/pkmntcgcollections

unsure about the exact sleeves there, but if you're just trying to get away from the matte sleeves out there, my go-to's are KMC hypers, textured back and clear front, specifically for pokemon cards they work for single or double sleeving

u/toyzu · 4 pointsr/MarvelLegends

The flat round stands are from Neca:

The ones with arms are the 5-pack from Obitsu:

Also available as a 1-pack:

I had bought the Neca stands for my Star Wars Black Series figures, originally, but they work OK with some Marvel Legends, but not all, since the peg holes on the MLs can be very shallow (and basically useless).

I got the Obitsu stands mainly because their round bases match the Neca stands, but also because they have a cleaner look than the Bandai Stage Act 4 stands.

The Obitsu stands do take a bit of work to get the balance right, though, and they tend to wobble a bit, but eventually they settle down. Heavier figure like the Thor have a harder time of getting the balance right.

They are pretty flexible when it comes to their configurations, though. The Star Lord and Captain Marvel figures are using the same stand, and are connected by a clip-on piece. I had run out of the flat base pieces, which is why I have them like that. The balance isn't super stable, and I had to use an extra piece to keep it from tipping over, but it seems to work.

u/Tweeqk · 4 pointsr/magicTCG

Not a deck box but im a big fan of this. Quiver Black Playing Card Case i use it to carry 3 edh decks in boulder cases and still have room for dice and playmat. Give it a thought.

u/kesa_maiasa · 4 pointsr/EDH

Depends on how many EDH decks you have. I personally use this awesome case

It pretty comfortably fits 5 double sleeved edh decks, 30 unsleeved token cards for various decks, and a box for dice and various other token/beads what have you (box is not included).

I've had it now for about a year and it's been fantastic.

u/Wrightboy · 4 pointsr/boardgames

I've really like the Quiver for travelling with a bunch of card games. Otherwise I've had good luck with the Iris photo box from craft stores, filled all of the carts with a game or two, handles more than just cards easily which is nice.

u/InsidiousToilet · 4 pointsr/magicTCG

While this is neat, I still prefer the "tried and true" method of just re-using Dragon Shield boxes (<-- edit: added a photo of my Cube):

  • 8x empty Dragon Shield boxes.
  • 45 cards in each box.
  • Players sit down, crack their "box", split cards into 3 piles.
  • Draft.

    Super simple, no wasted paper, just re-purposed sleeve boxes. I use a Quiver (love this thing) to tote my Cube around, and so it fits real nice. I use a 9th box for dice. The boxes are also a surprise way to slip some boosters into each "booster" for players on special occasions (birthdays, parties, etc).
u/poilsoup2 · 4 pointsr/KingdomDeath

currently they are in a 1 inch binder but I would recommend a 1.5 inch

u/Cowtippa1 · 4 pointsr/KingdomDeath

BCW Pro 20-Pocket Pages, Pocket Size: 2" x2", 20 Pages - Coin Collecting Supplies

These fit perfectly

u/DuckDuckBoson · 4 pointsr/KingdomDeath

Here's what I've gotten. They are perfect.

BCW Pro 20-Pocket Pages, Pocket Size: 2" x2", 20 Pages - Coin Collecting Supplies

u/leiaorganza · 4 pointsr/CrossStitch

I'm a total novice but I keep my thread in baseball card holders - basically segmented page protectors [like these.] (

u/BriceLamotte · 3 pointsr/EDH

I use this box :
It's recommended by the prof at the tolarian community college and by me :)
It fits 6 commander + tons of token.
Here is mine with 4 commanders, 2 unfinished ones, tokens and a double sleeved modern deck.

For taking it from one place to another, I use a normal backpack.

u/redli0nswift · 3 pointsr/dominion

I use these card boxes based on a review I saw in YouTube. It fits several expansions easily and I was concerned about the Hobby lobby case weight and ease of transporting.

u/getsniped · 3 pointsr/mtgcube

I have mine in a KMC box. Rather cheap, sturdy locking, hold sleeved cards well and in general I just wish I had bought more of the boxes.

It may not be as good as the Cube Vault, but may be a good option till that is back on the market.

I saw it in a video from The Professor - Youtube

u/jonhwoods · 3 pointsr/magicTCG

To store my cards on the shelf I use BCW cardboard boxes 500 to 800 long. Cheap and effective. These get worn out pretty quickly in a backpack though.

On the go, I use a KMC Card Barrier Box 1000. It's a little expensive, but the form factor is perfect for a backpack, the box is sturdy and my cards are well protected. The way the box is divided makes it easy to not have the cards rattle. TCC Review

u/scented_turtleshell · 3 pointsr/dropmix

I use KMC Perfect Fits and KMC Hyper Mattes to double-sleeve everything. You can still easily get a 5+ stack to read on the board with this set up.

I also use a KMC box to store everything and it works great. Sturdy, cheap, plenty of room. Definitely recommend it.

u/onyxavenger · 3 pointsr/EDH

I use the [KMC Card Box 1000] ( and have been satisfied with its capacity and durability. Single sleeved, it can hold 8 decks if you're not picky (two decks will spill over the fixed dividers), or 6 decks with two nice sections for tokens/counters/dice.
EDIT: Fixed link

u/Invictus_Sky · 3 pointsr/yugioh

Are the sleeves you're referring too these KMC perfect fits? -

I always used these for my binder as double sleeves and I love them, but I find it kinda hard to shuffle with them sometimes and they kind of slide off PC white easily as well.

u/SecretCabalJamie · 3 pointsr/boardgames

These are my favorite card sleeves. Card Barrier Perfect Size.

I like them because they fit standard cards perfectly. A lot of sleeves have some space between the card and the sleeve edge... these have virtually no space... very snug fit.

u/DanniDorrito · 3 pointsr/AnimalCrossing

Amazon have them but sadly the prices aren't great. I've came across the same problem as you're having too. For now I've ordered a 3-ring binder along with pocket pages and also some sleeves. The sleeves and pocket pages arrived a couple of days ago and the sleeves fit perfectly into the pocket pages. I'm still waiting on the binder but I'm looking forward to it. Least this'll keep my cards safe until I get my hands on albums.

Sorry I can't be of more help!

u/rein00 · 3 pointsr/Pathfinder_ACG

Holy hell... that picture on the package... as a side note, my friend and I have both bought these for our box sets and we love them. I sort of feel like you can't play this game without card sleeves, and you can't use the sleeves without a box insert. It's a little expensive, but considering how expensive the base set and ADs are, it's well worth the investment.

Edit: As a side note, I highly recommend this sleeve set. It's $8.95 for 1000 sleeves and it's Prime Eligible.

u/randomuser549 · 3 pointsr/arkhamhorrorlcg

I use the Ultra pro penny sleeves. They are flappy and thin, but cheap.

Regarding the decal, the penny sleeves don't have one. I'm not sure about their higher end sleeves.

u/Popesta · 3 pointsr/boardgames

Here you go, which reminds me that I just ran out of these last week

u/Rockergage · 3 pointsr/DnD

Well there is miniatures like what Reaper makes that are the standard but alot of people have had luck with finding what is suppose to be like kids toys miniatures and using them as they're exactly getting used in anything that might make them get crushed or broken allowing them to be used and are cheap enough to buy and are usually in bulk.

ebay is a very popular for lots but you don't just get to pick and choose. I recommend looking through walmart or target through the kids isle for like a bucket of miniatures.

This is what i am talking about, simple knight minis for about 7 bucks but you get a bunch.

u/elenionancalima2 · 3 pointsr/Pathfinder_RPG

I have a few proper minis that my friend bought for me, that we use for PCs and major NPCs. I think she found a few on ebay and at flea markets, but generally they are your standardly priced minis.

However, for enemies, I mostly use these toy soldiers. They are handy because they are cheap, color coded and have a good variety of weapons.

I also picked up these animal toys, but that's mainly because with a druid and a nature caller summoner in the party, they come in handy. That company does have some fantasy style stuff though, too, that I have contemplated picking up.

Probably the least legitimate, but cheapest thing I have for minis, is that my friend who works at Home Depot picked up some vinyl floor tiles, cut them up and glued pictures to them to represent, huge, gargantuan and colossal creatures.

u/Jurph · 3 pointsr/DungeonsAndDragons
  • These kinds of plastic animals are cheap on Amazon and you can also find them in most craft stores. I know I've seen them in Michael's in a local shopping center.
  • Here are 36 plastic knights, probably 6 each of the 6 pictured varieties.
  • Here are 100 zombies for $10.
  • Vikings, $9.00 for a dozen.
  • Pirates and Skeletons! You probably won't use the cannon, but the rowboat and the treasure chest will be useful.
  • Knights and Dragons...
  • More knights, with maybe skeletons...
  • Cavemen, which could also be troglodytes, orcs, or goblins
  • The old M.U.S.C.L.E. toys had all sorts of creepy shapes with bulging muscles and axes for hands and stuff.
u/SimplyTrustingJesus · 3 pointsr/boardgames

90% of the fun is actually in the miniatures tbh. It's honestly not the same without them.

It would be like if Fantasy Flight made Twilight Imperium 4th edition but instead of loads of plastic, they changed everything to different sized wooden cubes.

Even lego men, or a $2 bag of army soldiers would be better.

here is a medieval one

Just look up "bulk miniatures". They'll be poor quality, but better than a salt shaker.

u/locolarue · 3 pointsr/DnD

Get some army men-type minis. Amazon has several kinds.
See here:
Fantasy guys



u/Sai077 · 3 pointsr/KingdomDeath

I shot an email to techrapor asking if they could tell me (I also need these). I'll let you know if I hear anything back. :D

EDIT: The answer is in the comments:

u/bleuchz · 3 pointsr/boardgames

These are the ones I ordered

I would offer to mail you my leftover ones but at that price it probably cost the same just to send them over to you >_>'

u/Mare_Vaporum · 3 pointsr/KingdomDeath

I have the base game and all expansions. Every card I have is sleeved, except for the gear cards.


For all normal sized cards:
These fit flawlessly!


For settlement locations:
Yes, they fold around and seal on the back, but right now they are the best answer to protecting this huge investment.


For settlement events:
These are like 1mm too short. Sometimes it drives me a bit mad, but again, I would much rather they were protected this much, than not at all. They do get shuffled and used every round. I've seen some people use two sleeves per card to cover it completely, but that's a bit much and they tend to split badly when you attempt it.


Why did I not sleeve the gear cards? Because I bought these and cut them down to a 3x3 grid:
This keeps them quite protected during the game and is incredibly convenient as far as storing for next round.


Hope this helps!

u/Sephvion · 3 pointsr/KingdomDeath

If we're going off stuff like that then...




This if you ever get the Lion Knight expansion


u/latetothetable · 3 pointsr/boardgames

Oh man I need to get that playmat, but for me it was definitely my addon for Food Chain Magnate. It condenses the game from taking up every inch of a large table, to now being playable on an average or possibly even small table. Plus cleanup and setup takes half the time and it's much easier to keep track of who has what powers.

Runner ups include:

  • Kemet - Buying these coin cases to hold all of the power tiles. Now it's so much faster setting up the game, I also have enough to give to each player so they can have their own sleeve of powers. Best part is is that for new players they can just grab the sleeve rather than having to glance over at the power tiles from afar.
  • Pandemic/Dominant Species - I got these containers to hold all of the disease cubes and species cubes for both games and they work perfectly. My only suggestion would be to get a slightly larger container so it is easier to grab the pieces when they are inside, but the negative to that is that they will not fit in the original box as well.

    If I can think of anymore upgrades I'll post them
u/SoushaS · 3 pointsr/XWingTMG

here is a link to the ones I bought

they are in a binder, and I have turned the binder upside down and did not have a problem with them falling out as they do fit nicely in the pockets and to get them out you have to push them up from the bottom of the pocket as you can not easily reach in the pocket and pull them out.


as for the size, you need to make sure the pocket size is a little bit over 2 inches as the dials are 2 inches wide. the ones linked are an excellent size. plus 20 pages for $6 is not bad.

u/PvM_Virus · 3 pointsr/anime

I don't have any figures (yet) but nendoroids seem awesome with their interchangeable reactions, and the figures I would want are all really high quality representing my favourite characters. It allows me to get cool decorations while also supporting the industry

Examples of figures:






edit: for reference, I am 19, turning 20 this year

u/WhatDaFuckIsReddit · 3 pointsr/vinyl

Just got a huge collection from my dad (lucky me) contains some first prints of Led Zeppelin II and IV (US not Germany) and tons of other beauties (my fave Steve Miller Band's first album first print) and I would just like to know the best way to keep them you know, safe. They aren't all the best quality condition wise but they're from my dad, so you know, sentimental.

I found these but i don't know if this is what I need i'm a complete noob. Is there something like a filer that I could use instead so i could sort it by artists?

Also, about something to actually keep them in besides a tub? I'll be listening to them all the time cause I absolutely love the sound of a nice vinyl on high quality speakers. I'm quit low on money so anything cheap would work I'm not worried about looking like the fanciest guy in town. I'm lucky enough with the speakers I have and the albums I attained.

u/gkb182x · 3 pointsr/Blink182

You should invest in some of these.
Shrink wrap continues to shrink over time and can bend the corners. Just a thought.

u/radddchaddd · 3 pointsr/vinyl

A record shop I frequent uses these, which are exceptionally sturdy and accommodate most gatefolds with no issue.

For singles, I use these. They are not as sturdy but accomodate singles just fine.

u/DOMAN127 · 3 pointsr/vinyl

For outer sleeves, I use these. They're inexpensive (100 for $15, sometimes less since Amazon changes the price sometimes) and are crystal clear enough that you can see the album art through without any cloudiness or discoloration. This is useful so that it doesn't become hard to read the spines on your shelf; other sleeves I've used have posed that issue.

For inners, I should be buying diskkeepers but I'm too lazy and haven't gotten around to it. I also have ~425 records in my collection, many of which are more than one disc, so I know it would take fucking forever to get through all of them with replacement sleeves.

u/mattjonz · 3 pointsr/vinyl

I use these and have never had a problem with them. I like that they aren't too big, aren't too small. I think they're juuusst right.

u/johnjust · 3 pointsr/magicTCG
  1. KMC does sell clear Hyper Mattes.

  2. There are some unfun Planes, but probably only 4-5 at the most. You can find 6 to remove probably, but it leaves you with no extras. In the end, it's unfortunate to have to buy 3, but at least you have extras (which can also be used for Archenemy or oversized Commander cards). In fact, you can get a 2-pack from Amazon for around the same price as one single pack (which is weird), so you might just want to get 2 of those. As mentioned, there is an oversized deck box for holding them as well.

  3. Not really - you'd be better off carrying the 4 decks in a fat pack/deck builder's toolkit box.

  4. Probably not - again, you'd be better off carrying the 4 decks in a fat pack/deck builder's toolkit box.

  5. I'd save the box, as using it with sleeved cards/deck boxes (other than the provided slide boxes) wasn't really the intended purpose. The box itself is so thin (in depth) that I don't think even removing the plastic inner piece would allow it to fit regular deck boxes inside. Moreover, a box that size won't fit into a bag easily, whereas a fat pack box and the oversized deck box will fit almost anywhere (allowing you to preserve the original box for display/something else).

    Edit: Additionally, the Planar die that comes with the set is about 2x the size of a normal Planar die, so even finding a place for that is hard. I carry around a set of Chessex dice - the plastic case has some extra room for a normal Planar die if you have one of those sitting around (you basically put the d4, d6, d8 and Planar die at the bottom, then the d20/d10 next and the d12/d10 on top of that - should be an almost perfect fit). Or, you could always use a regular d6 and use 1/6 for Chaos/Planeswalk, respectively.

    Edit 2 - Forgot about the Planechase tokens... they're double-sided, so grab a pack of penny sleeves for those - that way, they're protected and still easy to use on both sides. You should have enough room left in the fat pack/deck builder's toolkit box for them along with the 4 double-sleeved decks.
u/vonDinobot · 3 pointsr/TransformersTCG

These are fine options:

I have the first one. It easily fits 2 decks and you can take out the piece that makes it into seperate compartments if you want it to hold all your large cards. I do that sometimes for trading, I just keep my battle cards in a regular deckbox if I do.

The second box doesn't do that, though.

u/DarthDadaD20 · 3 pointsr/magicTCG

Ultra Pro Magic the Gathering: MTG Mana Magnetic Flip Box are by far my favorite:

u/Myst132 · 3 pointsr/magicTCG

I've got one of these deck boxes and I love it! Some cool playmat would be good too, like this one. Personally I'd rather not just get a card, because those are everywhere. The playmats and deckboxes or even sleeves are where it's at. Maybe even a print of a card?

Although, as everyone else is saying, packs are cool too because of the surprise factor. I'd suggest a combination of one of the above along with a pack or two if possible.

u/Jables237 · 3 pointsr/magicTCG

They would be a cheap gift imo. They are only a few bucks. If you want a good gift box try one of these.

u/thedarkhaze · 3 pointsr/magicTCG

Ultra Pro does have a higher quality line the magnetic flip box but you are paying quite a bit more for it.

u/mtd14 · 3 pointsr/Entrepreneur

Yeah I've always thought it would improve any existing commander deck box (like these Ultra Pros), but don't know enough about crafting to make it one for myself.

If you make it happen let me know and I'll help you advertise. I have a moderately sized MTG playerbase that follows me on tumblr (7.4k), and I'm sure I'm not the only one who would be interested.

u/[deleted] · 3 pointsr/magicTCG

This type of deck box works well for me.

u/Jokers247 · 3 pointsr/ImperialAssaultTMG

Do you own everything?

I use the Plano tackle box, DVD case, and Card binder storage solution and it works really well.

so another user posted this except for he linked the wrong storage box. Ill link the storage box that would work for it all. If you paint minis then i would suggest possibly felt/foam lining the plano storage boxes. This really is a great way to store the game.
Pie in the sky way to store everything: For map tiles: AmazonBasics Nylon CD/DVD Wallet (128 Capacity)
For command cards/character and imperial decks: BCW PRO 16-POCKET PAGE - TOPLOAD - (20 CT. PACK) FOR X-WING AND ARMADA UPGRADES
For agenda cards and mission cards: Ultra Pro 25/9 Pocket Page Protectors
Putting them in a binder lets you more easily find a specific card they fit in these sheets even with card sleeves. I bought a nice binder that has slip sleeves in it so that I can store all the rules and skirmish/mission pamphlets along with the sleeved card sheets.The CD case holds any tile 4 spaces wide I keep the larger tiles separate and was able to fit every expansion in the CD case.
For the minis and everything else: Plano Angled Tackle System 732

u/hereforthepoints · 3 pointsr/churning

I bought a binder and filled with trading card sleeves (

Wrap the receipt around the card. Just in case.

u/mene3381 · 3 pointsr/HotPeppers

Baseball car sleeves:


These and any old binder will do! I just germinated 3 year old seeds with a high success rate that were stored in this way. Just gotta make sure they're totally dry before storing

u/ShockwaveMTME · 3 pointsr/EDH

May i suggest this?

It allows you to keep 3 double sleeved Decks easily.

This may also suit your needs if you prefer a more fashionable exterior and secured from accidental opening.

u/rickboo · 3 pointsr/FourSouls

Ultimate Guard UGD010085 - Stack...

I got this one :)
All the cards fit in there, and the expension too i hope.

u/Hero_of_Hyrule · 3 pointsr/hearthstone

Well I play Legacy and Modern, so I have some fairly pricy cards that I want to protect. Proper doublesleeving makes your cards nearly waterproof, and all but impervious to spills or mishaps. It also protects the cards really well from scratches. Lastly, if I want to put my cards in new sleeves, I don't have to fully remove them from sleeves, the perfect fit can stay on as I swap out sleeves. And the Japanese sleeves were probably KMCs, like mine.

u/RecessiveIbis · 3 pointsr/pkmntcg

I highly recommend trading on /r/pkmntcgtrades, just read up on the guidelines before you do.

Purchase some top loaders and penny sleeves. Place cards into penny sleeve into top loader, and use a bit of scotch tape to make sure they don't slide out.

You can either mail with (bubble mailer) or without tracking (plain white envelope). I always use some extra paper to make sure the envelope doesn't collapse on itself if I ship without tracking. If the cards are expensive, always use tracking and a bubble mailer.

For payment, I use paypal almost exclusively.

Good luck and have fun!

u/gamer4maker · 3 pointsr/ActionFigures

You can get these style ones in different brands (the one I linked to is BBTS), and NECA also make good base only ones here. Just a note about the NECA ones, they only work with figures that have normal size feet. Most of the Marvel Legends should be fine.

u/al_ien5000 · 3 pointsr/Funko
u/VaultBoy42 · 3 pointsr/ActionFigures
    I can personally attest that these fit a lot of Marvel Legends and SW Black Series figures. Not necessarily all, but a lot of them. They're made for 1:18 figures, and come with two pegs and usually one works. Sometimes I've had to use a blow dryer to heat the foot first to get the peg to fit, but either way, it works. They're pretty cheap and go relatively unnoticed. They're kind of small so typically it's one stand per foot on a ML figure.

    When this question comes up I see these NECA stands recommended a lot too, but I haven't used them.
u/Miran_C · 3 pointsr/starwarscollecting

They are these:

They're OK. The pegs are slightly too large for Black Series figures, and since the peg hole size varies they work better with some than others. Generally I only need them for the female figures since their feet are so tiny. Leia doesn't need a stand because she actually has big enough feet in this costume, plus her boots don't have high heels on them (Ahsoka, I'm looking at you - this is a design feature I do not understand because I cannot imagine that Ahsoka the character would ever in a million years wear heels, but whatever).

I don't know why Jyn stands well - maybe because she's knock-kneed. :)

u/pumpkinbundtcake · 3 pointsr/pcgaming
u/thundy84 · 3 pointsr/Calligraphy

...Let me just link you to this. It seemed relevant. And something that I totally purchased.

u/Bentweird · 3 pointsr/succulents

Funko POP! Marvel: Dancing Groot Bobble Action Figure

u/8bitesq · 3 pointsr/Random_Acts_Of_Amazon

EDIT: I gave you ten things because I can't count. (An eleventh interesting fact: I am number dyslexic and frequently mix up things that involve numbers.)

  1. I have three fewer bones in my body than the average human.
  2. I have lived overseas in Guatemala, South Korea, and Ireland.
  3. Right now I am desperately trying to learn ASL.
  4. I studied international relations in undergrad and recently graduated from law school.
  5. I collect genetically deformed cats. I have two; both are polydactyl and one has heterochromia.
  6. I run a nerdy blog; it's awesome.
  7. While I have several video game systems and a ridiculous number of games I am actually pretty terrible at video games generally.
  8. I have been swimming once in the past ten years.
  9. Dead fish freak me out so bad I get queasy watching Finding Nemo in the scene where Nemo pretends to go belly up.
  10. I once poked lava with a stick and to this day it remains the coolest thing I have ever done in my life. And I have done a lot of really cool things.

    I love RAOA because I like community. I like seeing the same people posting every day and learning new things about them. I like making friends and just having fun with them all.

    If I win I'll let you pick between surly Terry McGinness, Dancing baby Groot, or Captain James T. Kirk of the USS Enterprise.
u/StoryDone · 3 pointsr/Random_Acts_Of_Amazon
u/Theopholus · 3 pointsr/pkmntcg

I would recommend using KMC Perfect Fit sleeves. They are great for double sleeving, and for storing cards in a binder. Also, make sure not to use a 3 ring binder with the loose ultra pro plastic pages, the rings can damage your cards over time. Use a side loading binder like This.

u/YouthfulEdge · 3 pointsr/pkmntcg

You are using the wrong size of perfect fits. You need these:

They are standard size for MTG and Pokemon. I play with KMC perfect fit inner sleeves and dragon shield outers. My deck is all reverse holo, holo, or full art. No warps at all.

u/SmashPortal · 3 pointsr/magicTCG

I use the classic KMC perfect size inner sleeves. They hold the card very snug, so they fit in most normal sleeves.

They're generally sold for about $5.99 for 100 sleeves, but I've gotten deals on Amazon for buying bulk.

Actually, I use the perfect size sleeves for a lot of single-sleeving, since they're so tight to the card and are completely translucent on both sides. All of my trade foils are inside them to prevent scratching, and to act as an inner sleeve in the binder page pockets.

u/J4H1_TCG · 3 pointsr/PokemonTCG

Also I would use these on any cards that have value. The binder will keep them safe, but over the years they will still get scratched and worn from not being in sleeves.

u/Soylent_Hero · 3 pointsr/boardgames

Yes, everything.

Use: KMC Perfect Fits

  • Relatively cheap vs premium sleeves
  • Always available in bulk
  • Great uniformity between packs
  • Adequate protection for adults
  • Perfect size for US Standard cards
  • Card won't slip out
  • Minimal bulk so cards still stack
  • Corners won't stab your hands
  • Crystal clear
  • KMC is legit
  • Still available when you buy expansions

    Every Standard size card I own goes in those, and weird shapes go in Sleeve Kings, Mayday's founder's attempt at making a better product from the ground up.
u/hittintrees · 3 pointsr/pkmntcg

I mean it’s going to be snug. Most of the people I know who double sleeve use dragon shield tbh. You could try a different inner sleeve. Kmc is supposed to have some really nice ones.

KMC 100 Card Barrier PERFECT SIZE (10 packs/Total 1000)

u/booshmeister169 · 3 pointsr/boardgames

I use a quiver for a lot of my card games. Goes with me everywhere!

u/bkallday13 · 3 pointsr/magicTCG

Quiver - it’s sturdy and portable. I use one for commander decks and one for small card and board games -
Quiver Black Playing Card Case - Carrying Deck Case with PU Leather Exterior with Double Zipper, Dividers, Hand & Shoulder Strap - Fits up to 1300 Cards - Deck Box Compatible + 100 Card Sleeves

u/A_Paper_Ape · 3 pointsr/yugioh

Personally I use the Ultimate guard classic twin flip and tray deck boxes as they comfortably store my 2 double sleeved decks w/ full extra & side and have a draw for odd stuff like counters and dice. but to be honest if you only used single sleeved decks and used a shared pool of extra and side deck cards they you should be able to squeeze in 4 decks. But if your insistant on carryying 8 decks in a single box then one of your few options is the quiver.

u/Phrost_ · 3 pointsr/magicTCG
u/buoyantChicken · 3 pointsr/boardgames

I know that the quiver comes pretty highly regarded. Bonus that it's designed to be portable.

I wouldn't do it myself. I feel like I would forget about all the games I put in it. Seems like it would be harder to sell people on playing a game without the box for people to see.

u/Zylo_001 · 3 pointsr/EDH

I quite like the Quiver ( ) for carrying my decks to play. Hold about 6-7 decks in boulders + room for dice. When they go on sale they are at about $20 usd/each. Satin towers end up getting too heavy when carrying multiple of them and aren't compact. Rather just have a dice/token bag if I need one. I'd consider the Stanley cases, but I haven't seen any with square enclosures in my country.

u/KnitPrincess · 3 pointsr/EDH

Jeez, that's hard. I feel like his best bet would be this case called "The Quiver" and then a couple smaller double deck boxes like these I have both of those and they're kinda expensive, but the quiver holds 5ish double sleeved commander decks, and the ultimate guard holds 2 double sleeved commander decks plus a little dice compartment. You could probably squish a 6th in the quiver, but I would rather not risk damaging my cards. So maybe 2 quivers or some combination of quivers and double deck boxes? Or maybe a better option would be to take a look at a pirate lab bag like this one unfortunately I don't have any experience with that bag though so I can't speak for it's quality. If he doesn't like any of these I'd go check out Tolarian Community College Youtube channel, he has an entire series on deck box reviews. Good luck!

u/MustangDuvall · 3 pointsr/EDH

To carry all these, I don't think there's a good "premium" solution. However, I got the Quiver deckbox (
and it carries all 6 of my decks. Pretty nice.

u/SWTBFH · 3 pointsr/magicTCG

Cheap wood and cheap latches, no thanks. I'd rather get a(nother) Quiver. My current one is holding a 360-card cube, 200 lands, (all double sleeved) and dividers with no problem.

u/Zaccea · 2 pointsr/AnimalCrossing

I currently have mine in a Nyan Cat deck box that I picked up years ago during a Friday Night Magic. Of course, I have more cards than the box can hold now lol! So I ordered a customized binder and I'm waiting for it to arrive in the mail this week!

Once it gets here I'm planning on using the Ultra Pro binder pages and sorting them.. somehow! I was thinking of doing it numerically, but it would be easier to find a specific card if they were sorted alphabetically.

It's too bad I'm not interested in the Welcome Amiibo series because the sideways cards would fit my side loading deck box perfectly..

u/Tigeri102 · 2 pointsr/DnD

i would start by advising some QoL adjustments to his spell sheet - i myself, ESPECIALLY for classes like clerics which have their full spell list, like to color-code things that i can do on a bonus action and/or that take concentration, and ofc mark off anything that's domain, from a feat, from a race, etc so i don't confuse myself when prepping my shit. that on its own can clear up a lot. if i, say, use my action to toll the dead, i'll take a quick scan through my spell sheet, look for the blue dots i used to mark off bonus actions, and maybe throw out a healing word or spiritual weapon. it can also help to make an additional, filtered list of actions, bonus actions, etc that you use commonly - going through your entire spell sheet and character sheet can be overwhelming, so having a condensed list of everything you use frequently in one place can be handy.

i also went ahead and invested in spell cards and card pages to keep them in - having them as a quick reference is handy, i just keep them in the same binder i keep my sheets in and flip to them when i need to make some decisions.

i will say, the main thing that keeps my cleric so busy in combat is his personality. he's VERY protective, always concerned about his party members, so when i play him in combat, i'm usually trying frantically to make the most of my turn to that effect. i'll use sanctuary on the utility-focused bard and use my movement to get in front of everyone to take hits, or healing word the barbarian while using my action to pry the monk out of a monster's grip, to use some examples from my last session. obviously that kind of thing is gonna differ from character to character, but he could try, if he hasn't already, thinking about what specifically his character wants to accomplish in the average combat, and from there, think every turn about how to best use the tools available to achieve that goal.

u/SCAposting · 2 pointsr/kpophelp

Yes! I use ultra pro pages from Amazon.

u/stonewalled87 · 2 pointsr/Random_Acts_Of_Amazon

This Little Mermaid Funko would make me happy because well I loves me some Funko.

It's too quiet in here!

u/SlightlySweet · 2 pointsr/Random_Acts_Of_Amazon

So I stalk /u/stonewalled87 a lot because they are cool like that and very generous. I Really love this from their list because I love Disney and love the little mermaid, I also know they are holding a Funko POP contest in RAoA because they are addicted to them and wanted to share the Funko POP joy with the group. I also know they are a big SF Giants fan and like the /r/randomactsofmakeup sub. Also they get weird messages on OKcupid!

Edited: because spelling! And deleted some stuff because I think I got my contests mixed up oops! Too many tabs open!

u/LittlestMermaid · 2 pointsr/Random_Acts_Of_Amazon

Congratulations on the internship :D


In honor of your trip to Disneyland Paris (which I'm totally jealous of) something you don't know about me is I worked at Magic Kingdom in Disney World for 6 months as part of their college program.

Rød grød med fløde

u/ZombieInATopHat · 2 pointsr/Random_Acts_Of_Amazon

Happy birthday! tips hat

  • The happiest point for me this week actually happened today! I just found out that one of my favorite restaurants here in town has a gluten free bread! Since they only serve grilled cheese and ice cream, this made me ecstatic! I happily scarfed down a Sriracha + Cole Slaw + Provalone + some other stuff I don't know gluten free grilled cheese! (And the bread didn't taste like a brick! SCORE!)

  • My favorite food is....errr...tough call but I think I'm going to go with creme brulee! I want to take a bath in that dessert. I would not get very clean but I don't care.

u/maximumbamboozle · 2 pointsr/yugioh


u/josandercock · 2 pointsr/magicTCG

Ultra pro sell these six compartment deck boxes with enough room for 6 decks I believe. I can’t remember what they’re called but they’re a clear acrylic material and relatively cheap. I’ll try to find them online.

So it’s ultimate guard that sell the 6 compartment boxes: 6 deck box

And ultra pro sell these 4 compartment boxes: 4 deck box

u/glennfk · 2 pointsr/magicTCG
u/kdrakari · 2 pointsr/magicTCG

Matte Dragon Shields aren't quite as tough as the original, but they feel better when shuffling. Very comparable to KMC.

My personal recommendation would be "KMC Hyper Mat", spelled exactly like that as shown here. If your option is KMC but says Matte instead of Mat it isn't a fake product or anything, but it's not as good of an option so I'd recommend the Dragon Shields instead.

One additional thing to consider is double sleeving. If you have only a single set of sleeves and swap the decks inside, that does put a little bit of wear on the cards each time. Inner sleeves are a lot cheaper than regular sleeves, so you can put inner sleeves on all your used cards and swap out which ones are in the main sleeve as often as you'd like. It's not something you need to bother with right away, but it's a small optimization if you want to keep your cards pristine for as long as possible without spending as much. Also protects the cards from water damage.

u/default_T · 2 pointsr/bootlegmtg

These are the cheapest I can find the sleeves: it sounds like you already have the perfect fits.

I forgot to post the link to black lotus before but here it is:

I'm not sure if they'll have all the cards you need but hopefully its a start.

Don't be too nervous about your cards either. Most people don't pull out your cards while they read them, and with the two sleeves I doubt anyone will notice anything strange.

u/aGoodGamingName · 2 pointsr/twitchplayspokemon

Instead of linoleum try some card sleeves, maybe some from a magic the gathering site or similar. I use [these] ( but theres the slightly larger ones, [these] ( although im not sure how big those cards are, try looking around and you might find some nice card sleeves.

u/CaptainAsparagus · 2 pointsr/boardgames

I'm using the KMC Hyper Matte Sleeves.

I like them because they're slightly textured on the back and not as slippery as other sleeves. The cards fit very nicely in them.

I linked the black ones to you through Amazon. They have white, dark blue, and maroon as other color options. Also note that you'll have to buy 2 of these packs to have enough for Star Realms.

I store the game in an Ultra Pro Dual Deck Box.

u/Hydrox6 · 2 pointsr/pkmntcgcollections

The formats are always {set} onwards. Any set released after the given set, including the given set, is legal in that format. The current standard format, for example, is Primal Clash onwards.

Something worth noting is, as Bulbapedia says, a set is only legal after 3 fridays of release in the US. This doesn't mean you can't play the cards you get, it just means you can't use them in official events (though I'd make sure that whoever you're against is okay with you using the new cards first).

The format usually changes late August/early September, and while Expanded is still Black & White onwards, Standard is always a much smaller card pool, to allow variety and newer cards. Sets usually stick around for 2 years (ish).

Either way, have fun with collecting. There's no better feeling than pulling an amazing card. I highly recommend double sleeve-ing your most valuable/favourite cards (a perfect fit upside-down, then a regular sleeve over the top), as this will protect them from liquids pretty well.

u/alSeen · 2 pointsr/boardgames

I also find it amusing that some of the customer images on the KMC Hypermatte sleeves are of people sleeving Exploding Kittens.

Thank you for mentioning these though. I wasn't aware of the matte versions. I'll probably pick up a pack or two for Keyforge.

u/Jaythe2nd630 · 2 pointsr/pkmntcgcollections

I use KMC perfect size and standard size hyper matte. But if you’re going with the kmc standard size, make sure you get the new ones (link below), cause I read their previous ones weren’t the best but they’re fixed now.

Perfect size
KMC 100 Card Barrier PERFECT SIZE (10 packs/Total 1000)

Standard size
KMC Full Size Hyper Matte Sleeves (80-Pack), Black, Standard Size, Fits MtG, Weiss, Pokemon

u/Asclepius24 · 2 pointsr/pkmntcg

Not a theme deck, but this is probably the best thing for new players to learn on. Theme decks are really crummy and slow and don't give a good "feel" for what the game is actually like. This Mewtwo vs. Darkrai pack is straightforward enough that new players can learn on it but also well-built enough that it won't be boring.

I would definitely, definitely suggest getting enough sleeves for the decks though since the cards that come in there are worth more resale than the $30 you'll spend on the decks. One pack of these for the Darkrai deck and another of these for Mewtwo would work if you like color-coordination :)

u/Blodeuyn · 2 pointsr/magicTCG

I do this with my Scion Dragon Tribal EDH deck. I can't tell you his setup, but I can tell you what I've found to work well:

KMC Perfect Fits, as the inner-sleeve, put on upside down, so the opening is at the bottom of the card.

Any Normal Sleeve works as your mid sleeve. For the tightest fit, use KMC Matte (NOT SILK); however I use Ultra-Pro Illustrated ones, because the outer sleeves make the shuffle feel nice; so no worries about the middle one. These are put on normally, opening at the top of the card.

Finally, KMC Character Guards. These go on upside down, with the openings at the bottom; and make the deck feel like a more smooth KMC shuffle-feel. Wonderful together, but be prepared for a REALLY thick deck. Can be tough to shuffle all the cards with smaller hands.

In total; you'll need 1 set of Inner-Sleeves; 1-2 Sets of Middle-Sleeves depending if you buy a back with at least 100 in it; or if you just get a couple packs of 60-80; and 2 packs of Outer Sleeves. It can be a bit pricy, but nothing protects like it; 'cept maybe a top loader over each, haha.

Hope this helps!

EDIT: While I would 100% Recommend Dragon Shield Matte sleeves to anyone who plays Magic; I wouldn't recommend Triple sleeving with them as the middle sleeve. They're a little taller than most other sleeves, and might stick out more with the outer-sleeves. Haven't tested, but be Wary; like good ol' Norin.

u/SnickySnacks · 2 pointsr/dropmix

So it looks like the cards are 63.5mm by 88mm.

If I wanted to be parnoid and double sleeve these, I would want to get like this:

And this:

Does that look right?

Any suggestions on card cases to hold the whole collection? The dragon shield boxes seem to hold 100 or 400 cards, but reviews aren't clear if I can stuff all 300 cards in there double sleeved, since it makes them a bit thicker. Any suggestions on a box that will hold the entire season's set of cards?

Or am I overthinking it and should just get like a generic white cardboard box?

u/Myztical · 2 pointsr/magicTCG

I highly recommend KMC Hyper Matte Sleeves (80-Pack)


u/Geekken · 2 pointsr/arkhamhorrorlcg

I'd consider buying a few extra packs of sleeves as expansions roll out. You can get penny sleeves which can avoid typical wear and tear, shuffle decently, and won't break your bank.

u/Plausible_Lies · 2 pointsr/magicTCG

You can always just buy penny sleeves. Here is 500 sleeves for 6.85 they are fairly low quality which should be apparent by the price, but they will help preserve them a little bit. They also are a lot easier to work with than laminating as well.

u/Inquisitor_ForHire · 2 pointsr/Malifaux

So... to answer the second part of your question... card protection:

I(and basically everyone around me) uses these:
They're slightly loose on the cards which I like... makes them easier to get in and out if needed. You can get tighter ones that fit like a glove, but I like the slightly looser ones. Just need to be consistent in loading them so your marks line up on the wound circles.

For organization, I use these binders:

They're available in colors... I can get two complete factions in a binder. So I've got a Green one that houses Rezzers/Neverborn, and a Red one with Guild/Ten Thunders. 9 pockets per page... I tend to group everything by role... so a "page" for masters, a page for totems, then Henchmen, enforcers, minions, etc. I put "page" in quotes because it's really two pages as there's plenty of room to space everything out. For upgrades, I keep them grouped by crew and there's enough room for them to stay seperate and not get mixed together. Dupes I just stack in the same pocket... so things like Rotten Belles only take one slot.

Nice thing about the binders is the pockets are "side loading" so stuff isn't sliding out of the binder. I tried 3 ring binders with the pocket pages in them at the start and the top loading really sucked. Plus these take up less space in my bag... I generally carry two factions with me when I'm playing, but in my bag I keep all my cards (three notebooks) to keep things consistent, so saving space is helpful.

u/rkbwe · 2 pointsr/Gloomhaven

I ordered the mayday mini sleeves for my game and now I'm worried about it.

These are the sleeves I ordered:

Full Size
& Mini

Should I just go ahead and return them all? Do you have any recommendations for sleeves?

u/Keethus · 2 pointsr/pokemon

And be sure to get your hands on sleeves. There are a lot of different ones. I'll tell you the ones I use once I'm home :)



Regular Soft Card Sleeves These are the regular sleeves. They are a little bit bigger than the cards

Perfect Fit Sleeves These sleeves perfectly fit the cards with almost no space at the sides.


I combine them with the regular sleeves. I use them upside down so that the opening is at the bottom at the card and then put them into a regular sleeve. So it's 100% protected from dust


I put them into a binder after that so there is not too much exposure too the sunlight

u/BlueFlygon · 2 pointsr/PokemonTCG

Perfect fit sleeves fit your card... well, perfectly. They are just barely bigger than the card and are meant to be used with regular sleeves. Just an added layer of protection. I used to use them when I played MTG for some of my super expensive decks. They make your decks super bulky and I personally don’t think they are necessary unless you are playing some super expensive cards or if you wanna add a tiny degree of water protection to your cards. Also be warned that some people claim that certain kinds of perfect fits can warp your cards.
here is a link for perfect fits

Penny sleeves are way bigger than cards and can offer some protection if you’re just putting cards in a binder or top loader. They’re not really for playing. (Your cards will fall out and it will be impossible to shuffle.) Most people use them for storage. Personally I use them when I mail cards in a trade or something. It’s really not doing much except maybe protection from scratches. When I say they are big I mean you could probably put 5-7 cards in 1 penny sleeve.

here is a link for penny sleeves

Hope I could help

never tried and never will try. Don’t take my word for it.

u/ShinakoX2 · 2 pointsr/boardgames
u/Stimulate2Emulate · 2 pointsr/yugioh

Those cardinal binders look nice, but are awfully expensive on Amazon for me.

Moving on, to answer some of your questions (and to ask some of my own), what sleeves do you recommend? I found these, would they suffice for ultra pro 9 pocket pages? Or do I want something a little thicker? I chose those because they are on the cheaper side, from what I've read review wise, they are also thin, however.

As for how many cards I have right now, none, I'm going to be buying a lot of singles via eBay until I complete my original binder(s) of holos. So I'm completely rebuilding my collection from scratch.

Last question, what is the difference between a trade binder and a 3-ring binder, or is a trade binder just what you call a 3-ring binder where you put your rarest cards that are up for trade?

u/JonzoNYC420 · 2 pointsr/funkopop

NECA Action Figure Display Stands (Pack of 10)

This is merely an example.of what I'm talking about. I use these for my action figure but if you read comments some people use these for pops

They have similar discs like these for cheaper if you keep looking on amazon

u/thenewvegas · 2 pointsr/ActionFigures

I've been using the NECA figure stands for my Black Series figure that don't quite like to stand on their own. I would recommend them!

u/Dra6oN · 2 pointsr/funkopop

These are supposed to work: NECA - Action Figure Display Stands, Fits most 6"-8" Figs, 3.5" Dia (1-Pack of 10)

u/kali546 · 2 pointsr/funkopop

This is what I do. I have a lot of Harry Potter keychain figures because the scale works better (Dobby, Nifflers, Picket, etc) and museum putty keeps the wobblier ones standing. Marvel key chains are especially difficult because of the bobble head. My classic Ant-Man pop stands up on his own but The Wasp has tiny little needle legs and a GIANT HEAD so I ended up super-gluing her to an extra stand.

u/soybean311 · 2 pointsr/starwarscollecting

You could try these for the 3.75 figures

Star Wars 3 3/4-Inch Action Figure Base Pack Stands (Set of 40 Stands)

For the 6 inch you can try NECAs

NECA - Action Figure Display Stands, Fits most 6"-8" Figs, 3.5" Dia,Pk of 10

I personally have found good use of the KO tamashii stands. Took me about a week or two to get them, but they're worth it.

Action Base Suitable Display Stand for 1/144 HG/RG Gundam/Figure+Hook Blue New
(from AliExpress Android)

u/nosfatsugustafson · 2 pointsr/starwarscollecting

These should work! NECA - Action Figure Display Stands Display Stand - Clear

u/nexusx86 · 2 pointsr/starwarscollecting

I have those. They are fairly good, but as stated by others, not all figures fit. I use museum putty or tak (the clear or white variety) and that holds feet which pegs do not fit to these bases if you have them weight balanced in not to extreme of a pose to where they would fall over.

u/mani_espi · 2 pointsr/funkopop

NECA Action Figure Display Stands (Pack of 10)

These are the stands I was talking about, if you do decide to buy these stands and they don’t work you can try the boiling water method which is when you boil water and dip in the part of which you want to fix on your pop and you wait a couple seconds for it to soften and then take it out mold it to the pose that you want and place it in ice cold water and that’s should do it.

u/thefunnyman88 · 2 pointsr/PS4
u/Conneris · 2 pointsr/lootcrate

$25 + $9.95 shipping on amazon, if you can't find anyone to trade with. Good luck man.

NOTE: The Groot figure from July was an exclusive glow in the dark version, which the Amazon version lacks. Just so you know. :)

Other ones that are cheaper:

Dancing Baby Groot - $10

Rocket Racoon - $14

Drax - $10

Gamora - $10

Star Lord - $11

u/RaijinThnderkeg · 2 pointsr/uwaterloo
u/-OP_pls- · 2 pointsr/movies
u/Raulimus · 2 pointsr/toys

I haven't seen any that dance. I'm on the hunt for my gf too. There is a pretty cute Pop! that Funko makes of him.

I think he's available in some places, but I'm having a tough time tracking one down. Good luck in your hunt!
EDIT: The POP I linked doesn't dance, but he does bobble.

u/digitalbore · 2 pointsr/Wishlist

We need one of these.

u/hyrulerho · 2 pointsr/Wishlist

look at that face how can you say no....

have fun, be safe and live... do something that makes you say i am alive.... something way out of your norm

u/ClassH · 2 pointsr/legendarymarvel

A lot of people recommend sleeves that are a bit bigger than the card and I dont know why. I tried quite a few and hated them. Then I found KMC perfect fit, they are still cheap but fit the cards almost exact, barely tell they are there.

u/NaughtyRhombus · 2 pointsr/PokemonTCG

For my high value cards, I double sleeve them. First I load them top first into perfect fit sleeves, then load them bottom first into a larger sleeve like the ETB sleeves. I like the extra shine from the silver on the ETB sleeves and they're nice and big. Then, they go in a top loader.

For any mid-range cards I at least put them in a single sleeve.

At a minimum, you should be putting cards you care about into sleeves and then a top loader. Putting the open end of the sleeve down into the top loader would definitely be better to protect against dust or accidental water exposure.

u/HitenStyle · 2 pointsr/pkmntcg

You've received some great advice. Here's my take (after watching countless hours of the Professor on Tolarian Community College youtube channel).

  • The ultra pro deck boxes are a great start!
  • For about the same price, try out the ultra pro 'pro-dual' deck box. It holds two decks (or one deck plus dice/counters) all in one convenient spot! (link)
  • The elite trainer boxes are a great value, and the box is excellent for storing cards. You can put cards in directly (like the picture provided above) or you can even fit the Ultra Pro deck boxes inside. (link
  • The elite trainer box also includes card sleeves that you can use to protect your kids' deck. These are not the strongest sleeves, but they look great and are much better than nothing. If the kids are yanking cards in and out of these they may get beat up pretty quickly, so you'll have to decide if it's worth using sleeves at this point.
  • Inner sleeves (or penny sleeves) are clear transparent sleeves. These will provide a bit of protection and can be used permanently (no need to ever take them out of these). Cards sleeved with these can then be 'double sleeved' in the bigger outer sleeves (like the ones included in the elite trainer box) for maximum protection. Inner sleeves are slick so trying to use them without an outer sleeve may prove difficult as the cards will slide around and not stack well. (link)

    Good luck! Check out the Professor if you really want to go deep! His 'report card' is great!
    Card Storage Report Card

u/aznsk8s87 · 2 pointsr/magicTCG
u/slimslider · 2 pointsr/Monero

I've been looking for something like this, but I cant find everything I've searched for. When I tried to paste a link to a specific product I'm getting an internal server error. example Does the product have to be sold or fulfilled by Amazon?

u/DontAskMeToChoose · 2 pointsr/arkhamhorrorlcg

Purchased this 1000 pack of KMC and they arrived looking legit and I love them. No issues. None of the things you mentioned. These must have been official.

u/LookMomImOnRedditlol · 2 pointsr/boardgames

I wonder which sleeves you're using? I mean, you probably are truly out of space given the extra big boxes you have there, but i use these for all my card games no double sleeving, just a simple bit of protection and of course makes the cards easier to shuffle. If you're using thicker sleeves, resleeving them to these KMCs would probably save you a significant portion of space in there.

I completely agree, Upperdeck should release a collectors box. I heard they were going to, it was even confirmed in a youtube video where a developer mentions they were working on that, but... where is it?


u/ShadowMoses05 · 2 pointsr/pkmntcgcollections

KMC 100 Card Barrier PERFECT SIZE (10 packs/Total 1000)

u/gelema5 · 2 pointsr/translator

Or here

u/aaronwardL69 · 2 pointsr/mtgcube

The youtuber "the Professor" reccomends KMC Hyper Matte's and double sleeving with them.

The below links lead to amazon bundles of them at a pretty great price.

u/CoolIdeasClub · 2 pointsr/dominion

I have bought a ton of these.

They are not great quality sleeves, but I like them because they're clear which is nice to differentiate card types for certain games and allows you to actually see the art. I also use a ton of these sleeves so this is a lot more cost efficient.

u/Cottonjaw · 2 pointsr/Netrunner

I always recommend the Quiver. Its a little pricey (although on sale right now) but its the last deck box you will ever buy. Mine is currently holding 5 runner and 4 Corp decks, 2 MTG decks and tokens.

u/TheGuyInAShirtAndTie · 2 pointsr/magicTCG

Im a fan of the Quiver which also is conveniently wide enough to hold a Sign in Blood Life Pad and deep enough I can store a couple small Chessex containers.

u/Hasuko · 2 pointsr/boardgames

I think you might have misunderstood my question... I mean something like this:

But I'm looking specifically for one that works well with oversized cards.

u/Bioq · 2 pointsr/mtgcube

QuiverTime $40 zipper closed, includes shoulder strap, and fits a 360 cube perfectly.

u/dj_gengar · 2 pointsr/magicTCG
u/ADClinton · 2 pointsr/mtgcube

Simple, affordable, and will protect your cards. Just bought one (I was using a Legendary: Dark City box before it). Definitely feels a lot better carrying it around in that than the cardboard box.

I store my 800 card MTG proxy cube (as thick as double sleeved cards) and carry lands separately in one of the duel deck carriers for when I build another cube so I don't have to sleeve additional basics and just carry them separately to use with every cube I own.

u/McArthurWheeler · 2 pointsr/mtgfinance

BCW boxes. You can find them at card shops all over. Sometimes shops that focus on sports cards (baseball, etc) can be cheaper on these. I have read the 5000 count boxes can't handle the weight that well so I always stuck with 3200 and below. I have all sorts of sizes and never had any issues. Most everyone uses these boxes in some capacity.

Probably is above the budget but KMC has a Card Barrier Box 1000 that is very nice for sleeved cards. I use those for most my better cards that I keep sleeved.

u/kellygene · 2 pointsr/magicTCG
u/bantknight · 2 pointsr/EDH

I use this KMC to hold my edh decks: Card Box 1000 The professor reviewed it and recommended it. I use it to hold 3 double sleeved decks, 4 single sleeved decks and tokens/extra cards.

u/mxzf · 2 pointsr/boardgames

What about something like this? Apparently it'll hold something like 6x 60-card decks per row, so up to 12 decks or a bit fewer plus some storage space for dice or whatever. It doesn't have perfect pre-made dividers for each and every section, but getting a slice of cardstock or foamcore to separate different decks in a compartment is trivial.

Another good idea would be to search the /r/magictcg subreddit for "multi-deck boxes" or something like that, since I'm positive the topic has come up on there a few times.

u/rkho · 2 pointsr/mtgcube

I have a bland KMC Card Barrier Box storing my 540 Powered Cube at this time, I'm waiting on a commission from Aaron Cain that will hopefully arrive around the holidays.

Lands and tokens are in standard cardboard boxes, but those will be integrated into the wooden box once I get it.

u/thefathermapple · 2 pointsr/mtgcube

The KMC Card Box is really good. It has my dragon shield matte sleeved 360 Khan's Cube and 300 land for all my other cubes, including a Commander cube. It would be a good fit, but close.

Edit: link.

u/MaskedThespian · 2 pointsr/magicTCG

I use the KMC Card Barrier Box 1000. Each one can hold at least 7 sleeved Commander decks, perhaps more if you squeeze them in and don't mind them being separated across compartments.

u/karawapo · 2 pointsr/AscensionGame
u/relikter · 2 pointsr/magicTCG

The KMC Card Barrier Box 1000 might meet your needs. TCC reviewed it a while back.

u/Jojo_Fine · 2 pointsr/magicTCG

I just got this for my 540 card cube and it seems to fit the cards + basics really nicely. About half my cards are double-sleeved.

u/Zach02 · 2 pointsr/boardgames

I sleeved mine with

Then I made a new insert from foam core.
It just barely fits, but it does. I will try to remember to post a picture when I get home.

u/bosteen · 2 pointsr/lotrlcg

Penny sleeves have been my LotR LCG mainstay for a while now, but my head has been turned by the slightly more expensive 'inner' sleeve packs. Made for obsessive M:tG players to doublesleeve their cards, these are like penny sleeves that fit the cards precisely. No gaps, snug fit.

Scuse the UK amazon link, but these are the ones I have bought:

I may, slowly, use these to resleeve my character cards, as the flabby overhang on the penny sleeves just looks and feels terrible by comparison. These perfect fit ones have ruined the others for me! Get them at your own risk!

u/pastarific · 2 pointsr/boardgames

> Sentinels, 7 Wonders, Pandemic

For non-CCGs I use KMC Perfect Fit sleeves. They're super thin (doesn't completely wreck deck/stack height,) fit cards quite snugly, and provides plenty of scuff/wet protection as well as easier/side shuffling.

My RFTG+expansions, Pandemic, and Netrunner are all fully sleeved with them. Probably have over a thousand cards sleeved in them so far.

I'm really surprised nobody else really seems to use them. They're kind of pricey for not-exactly-penny-sleeves but the production tolerances obviously much stricter. (Last pack of cheap sleeves I got essentially had two different sizes of sleeves in the same pack. They literally went in the trash.)

For MtG/CCGs where you've got single cards valued at $10+ I use Dragon Shields. For drafting I sleeve everything Perfect Fits. Just because its better than playing raw.


edit: In my experience, all sleeves are oil slick when they're fresh. Play a couple times to break them in and they're fine.

Regarding dragon sleeves and splitting, I find Dragon Sleeves split FAR more often than Perfect Fits. Maybe all KMCs are better in that regard, or maybe fitting much tighter just means less stuff to snag. To Dragon Sleeves' credit, you get 105-110 in a "box of 100" so you do have some extras when they split. It would be infuriating to buy a box of a certain color for a MtG Commander deck (100 cards exactly,) have one split, and then need to buy another entire box of that color.

u/ctsjohnz · 2 pointsr/sentinelsmultiverse

That makes sense. I've always assumed penny sleeves were about $1 for 100 sleeves, though I'm sure inflation will kick in ay some point.

I just searched on Amazon and here's one I found (with free shipping, too!)

u/wolfkin · 2 pointsr/sentinelsmultiverse

CRIKES!?!!? $2.50 for a pack of penny sleeves?

Do you have local stores in your area? Because at my local i pay $0.89 + tax for those.

Actually you can get that price if you buy in bulk apparently

u/precordial_thump · 2 pointsr/boardgames

There's a pack of those Amazon cards in sets of 1,000 for a better deal.

I sleeved my entire Legendary with them and am incredibly satisfied with them. As long as you're not expecting a super tight fit, they'll be fine.

u/FortConspiracy · 2 pointsr/cardsagainsthumanity

Since I'm not a gigantic jackass.

[–]DaveLambertModerator 6 points 1 year ago
How about 1000 sleeves for $8.95 ? These are the ones I use on my almost 3000 CAH cards (which reminds me, I'll soon need to order a 4th round of them...).

u/rakakaki · 2 pointsr/DnDBehindTheScreen

I like using these guys for my enemies

They run just a bit big, but it's workable. I use these for my PCs.

Both paint well.

u/rkoloeg · 2 pointsr/Warmachine

Cheapest -

Cheap -

Not as cheap, but actually good miniatures and can be used for RPG stuff-

The first two won't ever look nice and the paint might eventually flake off, but 36 plastic warriors for $8 is a good place to practice building up whites, painting metals, basic highlights, and different color combinations, before you slap paint on a $25 warjack.

u/HernBurford · 2 pointsr/DnD

I recently started a campaign and bought a sack of cheap, plastic minis to get our group started. Here's what I found on Amazon: 36 pieces for $7 and they fit my 1"x1" grid maps very well. Link

These are just knights of varying types, but there's enough there for my four PCs (bows for rangers, swords for melee types) and they can tell them apart.

In a pinch they make good stand-ins for monsters too. If you trawl through Amazon, there's plenty of "50 piece plastic skeletons" lots for under $10. They are the quality of little green army men, but they do the job well at a bargain-basement price.

u/godplusplus · 2 pointsr/KingdomDeath

Personal suggestion:

The only cards that will need shuffling are standard size (Hit Locations, AI, Innovations, Disorders, Hunt Events, etc). So it's easy to get sleeves for those. And since they are standard size you can even colour code the sleeves easily.

Settlement Event cards are the only "weird" sized cards that will be shuffled, but you can get around that for now by using dice or a randomizer until someone releases sleeves that size (which are easy to get and don't require a frigging kickstarter pledge).

Gear cards are strange sized, but you won't need to shuffle those. Use something like a "coin protector page" (similar to this) if you wanna protect them while playing.

u/petitbleuchien · 2 pointsr/coins

Binder: any office supply store.

Fine point sharpie: ditto

Cardstock to cut into 2x2 blanks/spacers: ditto

Binder sheets:

2x2s (for example):

Flat-clinch stapler:

u/kynwork2 · 2 pointsr/XWingTMG

Honestly, for cards (both upgrade and pilot) I have everything sorted in a huge binder. That being said we're hitting critical mass and gonna have to start carrying two binders- one for Pilots and one for Upgrades.

Also, wanting to upgrade to the Upgrade Dial Kits we're running into how to organize the dials and chits; what I'm wanting to do with these is put them all in Coin Sleeves:

u/IgwanaRob · 2 pointsr/XWingTMG

I use 2"x2" coin holder pages in my binder, they will fit both halves inside each pocket. I leave the dials separated so that when I put one into one of those schmancy new plastic dials, the top half with the label is left behind to remind me where it came from, and I can always look at the back to match the numbers if needed.

u/Mikomaxless · 2 pointsr/boardgames

I dont have an insert, but for people who want something small to make set up easier... here!

I was linked to these coin collector sleeves a while back. You just cut a row off, and it makes it basically perfect. And it fits in the box great.

u/Tyranten · 2 pointsr/boardgames

Exactly that! If you're on Amazon you can see that a few of the reviews for them will say how they were specifically bought for the Kemet power tiles. They work great :)

u/moo422 · 2 pointsr/boardgames

You must not have seen these:

Fits pretty perfect; a bit snug, but great for passing around the table as well. (eg see

New Kemet expansion coming next yr, might want to hold off on the insert.

u/obylix_work · 2 pointsr/XWingTMG

here are some on amazon, i use them for dials and small ship tiles

these pages in general are made of a stiffer plastic not soft like ultra pro pages

but before using they can be "loosened up" and work great

u/Scruffy_lookin · 2 pointsr/XWingTMG

One idea I saw and loved are the plastic binder pages for coin collectors

u/dangledorf · 2 pointsr/boardgames

It is a really really solid game, and if you end up loving it as much as we did, there are some very simple amazon purchases you can make to make setup take <5mins.

Power Tile holder - Cut off 1 row and the binder holes and you can store all of the power tiles in here. These fold in half and fit perfectly in the box. Setup is as simple as taking the 3 sheets out of the box and done!

Player boxes - Put each colored players pieces in these boxes (battle cards, miniatures, prayer point tracker, turn tracker, and action tokens). With the last extra box, put the Divine Intervention cards and all of the small extra silver/gold action tokens. If you can find ones that are slightly deeper you could even fit each of the 3 colored pyramids.

Victory Point holder - Holds all of the victory points in their own compartments.

u/alandros · 2 pointsr/vita

I store the cases on the shelf. I keep the carts though in a zip binder. The sheets to hold the carts can be found here.

u/JudenInduven · 2 pointsr/coins

I have these and they've been great so far. For weird denominations like 3c, I just used whatever was the closest side. The closer the coin fits, the less it rotates or (obviously) slides around. Just kind of an appealing part of using a properly sized flip. Also, the little clear material is (I believe) Mylar [EDIT, the seller, Hobbymaster USA, says it's polypropylene "which contains no acid, PVC, or Vinyl". Similar to Mylar, but not the same, since Mylar is trademarked"] , which doesn't cause the same issues as just being loose in PVC flips, like verdigris.


And I also have these to hold the 2 x 2. No complaints with them either. Check out the reviews on both though, to see if you think they'd suit you.

u/FatherSyn · 2 pointsr/XWingTMG

To be honest, that picture was taken when I was only about 2 months in. I wouldn't be able to fit all my full dials in a binder with my collection now, so I use the upgraded dials and only keep the maneuvers half of the dial and the ship ID token in the pages with the bases. I have one of every ship and multiples of some, and can fit all 3 factions in 1 2" binder.

Edit: These are the pages I used.

u/Serializedrequests · 2 pointsr/boardgames

I have made two key upgrades to my copy that made it 100% more playable:

  1. Print off extra reference sheets. BGG has some good all-in-one PDF's. Any will do, especially if you don't need the expansion.
  2. Put the power tiles in these:

    Cuts a half hour off the game, easy.
u/Duelknives · 2 pointsr/KingdomDeath

This is what we've been using and it works just fine:

There's also a guy on patreon named Fen that has a bunch of reference files for abilities, disorders, fighting arts and the like sized the same as gear cards. You can have them printed up at that make playing cards site.

We just have our gear grids in a regular binder. I can post a picture later of what it all looks like if you want to see.

u/iboone · 2 pointsr/anime

I'll usually only buy figures for series I'm truely enamored with. I keep all of mine in my office, opened, in various places. I try and stay away from some of the more expensive ones. Unless there is really something that catches my eye. This Kurisu statue being probably the next addition to my collection and will also be the most expensive.

My first purchase was a Ryoko Hakubi though sadly is not a picture of mine. i no longer have that one due to a very annoying feline who hunts expensive objects in my house.

u/keriberry_420 · 2 pointsr/keriberry_420

Lmao, I'm getting the itch again lately- what to get.. hmmm. This or this

u/edmard · 2 pointsr/steinsgate

This one was $40. I saw the figure of Kurisu with the gears but it was $115, along with one of Kyoma that was $130.

When I saw this one I snatched it right away :D

u/Zaidbenh · 2 pointsr/AnimeFigures

It's made by kotobukiya. Couldn't find it in stock on amiami but it seems it's on amazon

u/lekousin · 2 pointsr/gamindustri

Nep related: Hyperdevotion, RB3 and RB2 JP LEs came in some days ago, as well as Blanc figure (+ crystal paperweight) yesterday. God she looks so good in her uniform.

Now I'm waiting for my other orders to be delivered:

  • Mk2 JP LE
  • V JP LE
  • RB1 JP LE
  • PP JP LE
  • U DX pack
  • Saturn Nendoroid
  • Saturn premium figure

    After some time, I'll also buy:

  • the artbooks (only one found that cannot be shipped oversea is RB3's)
  • V US LE
  • PP US LE
  • Any other non-JP LE I find

    I also pre-ordered some items on ami-ami:

  • Both 5th Anniversary scrolls
  • Trading can badge
  • Nepgear Chocosta
  • Black Heart Chocosta

    After all that comes in I'll maybe consider buying some more figures (damn Uni and Gear prices). Until that, I would have to find a good way to place my stuff on the desk; what I currently have:

  • Blanc (as said above)
  • Crystal paperweight (same)
  • Alter's Black Heart
  • Makise Kurisu
  • Umio plush
  • MegaTagmension DX pack's mug
  • Noire - Made in Lastation
  • MegaTagmension DX pack's Blanc figure
  • MegaTagmension DX pack's Calendar

    And as this desk has my computer monitor and some other stuff, it will be hard.
u/Ryanharsch77 · 2 pointsr/KGATLW

I like these
BCW 1-RSLV 33 RPM Record Sleeves (100 Count)

Also have them in an IKEA Kallax shelf, to prevent Ringwear I don’t pack them in too tight

u/Dirttymike · 2 pointsr/vinyl

Process of any record I receive. Open it, air spray big dust particles off, use cleaner with a simple microfiber cloth (i damp the cloth) after that I put back all the internals into the record sleeve and then put the actual record in some good inner sleeves and put it behind the record sleeve and put all of that in some simple outer sleeves. I do this to every record and I do it because I value the money I put into my collection and would like to prevent wear and tear (I have a 13 month old daughter on the lose) especially for trading purposes in the future.

u/electric_dolphin · 2 pointsr/vinyl

I find it's best stored in damp, warm places, or if possible near open flame. Under a furnace, or near but not in, a fireplace.

Yeah you're fine dude. Vertical is best. If you wanna preserve the jacket, get outer sleeves like these and keep the record in the sleeve alongside the jacket, in the clear outer sleeve. Then you won't end up with ringwear on the jacket after a couple years.

u/BrainlessProdigy · 2 pointsr/vinyl

This is probably not a popular choice for outer sleeves but I bought these since they were cheaper and I think they're great. I've had no problems with them except it's a little hard to get double LPs in them sometimes.

u/designersquirrel · 2 pointsr/vinyl

For inner sleeves I use Mobile Fidelity Master Sleeves Amazon

For outer sleeves I'm not terribly concerned so I use the cheap ones Amazon

u/mundet · 2 pointsr/vinyl

These are the ones I use on all 400+ of my records. Sometimes you have to put gatefolds in on a different side than the rest, but they do the job.

u/razaflame · 2 pointsr/magicTCG

Using this one

Just one fits all 2009 and 2012 and promo sleeved Planes after you take the freely removable divider out

u/Lilgodzilla6 · 2 pointsr/magicTCG

This should work.

As well as this

The worst case is you buy the cheaper one and you're out a few bucks. I would recommend however, checking around your LGS to see if they have any options there that they could let you try out or use to see if you like it.

u/vatechguy · 2 pointsr/magicTCG

I like the duel deck boxes - UltraPro makes a generic version of it.

(Take the actual deck boxes out of it and it fits the oversized sleeved planechase cards.)

u/kbergstr · 2 pointsr/bladesinthedark

Use sports card album pages like these- just staple them on

u/ChromeEagle · 2 pointsr/dndnext
u/JoshGiff · 2 pointsr/ImperialAssaultTMG

For map tiles: AmazonBasics Nylon CD/DVD Wallet (128 Capacity)

For command cards/character and imperial decks: BCW PRO 16-POCKET PAGE - TOPLOAD - (20 CT. PACK) FOR X-WING AND ARMADA UPGRADES

For agenda cards and mission cards: Ultra Pro 25/9 Pocket Page Protectors

Putting them in a binder lets you more easily find a specific card they fit in these sheets even with card sleeves. The CD case holds any tile 4 spaces wide I keep the larger tiles separate and was able to fit every expansion in the CD case.

u/cstansbury · 2 pointsr/magicTCG

> I'm wondering how I should organize, store, and use my cards.

For me, I went with BCW boxes for commons and uncommons, sorted by set, then color. UltraPro page protectors for 3 ring binder for my rares, foils, and mythics.

The Professor has a video on how to store your M:tG cards.

u/BigBoss928 · 2 pointsr/XWingTMG

I have been having the same issue trying to figure out how I want to store all my dials and tiles. I have noticed that if you want to do binders that the small base tiles fit into the old 1.0 Mini upgrade card sized pages, the medium fit into the Normal card sized pages and the large bases fit into the 4 Slot sheets. In terms of dials I have been reading that people have been using These sheets. I have been on the fence about using binders for these, but I already have a box of 100 mini upgrade sheets from 1.0 that I still have like 80% of because I bought it before 2.0 was announced thinking I would need them. I was considering doing card and coin boxes for them. I know Coin boxes are popular as well for dials and small bases, but for the medium and large I don't really have a solution to those right now. I know I can fit the large into Card boxes, but I don't know if there is a better solution for medium bases.

u/improbitas · 1 pointr/EDH

Kmc 1000 card box. Holds exactly 8 edh decks. I have 8 in mine, sleeved with dragon shield matte (the thickest sleeves you will find), and about 10 double sleeved cards in each deck on average, so there is a bit of extra room.

You can also find it on ebay. Recommended!

Only bad part is the unsymmetrical space dividers, but thats not much of an issue. Its actually makes it perfect if you want 6 decks + dice and tokens..

u/inatube · 1 pointr/magicTCG

When my cube was 360, it fit snuggly in two fatpacks.

When I expanded to 450, I got this:

You can get it shipped for ~$20, though it takes several weeks if you live in the U.S.A.

400-410 of the 450 cube cards take the whole top row, and lands and tokens plus the remaining cube cards fill the middle of the bottom row.

The smaller slots on either side of the bottom row are blank at the moment, so if/when I push north of 450, that's where those cards will go.

If I stayed at 360 and shaved back on lands (if I were consistently playing with 4-6-players, for example) then I would use the side slots of the bottom row for card, and use the center well for the dice bag we use.

u/jreilly89 · 1 pointr/gaslandsplayers

I use this box and it works great. Usually you can find it at a hobby store for like $10.


u/barbariandice · 1 pointr/boardgames

KMC Card Box 1000 fits sleeved cards well and still has room with 600 sleeved cards.

u/QueenofCoils · 1 pointr/EDH

This isn't anything fancy but 1000ct KMC Box is really sturdy, I used to store my EDH battlebox in one & me and the hubby store our standard/modern/pauper collection in them as well :)

u/joqose · 1 pointr/EDH

I use this.

It does require using some dividers since the compartments are fixed, but it fits 8 sleeved decks very nicely.

u/LightningBolt12 · 1 pointr/magicTCG

I use a big clear plastic box that KMC makes for my EDH decks. It will hold 6 double sleeved EDH decks in total.

u/MichMusic · 1 pointr/magicTCG

If they are sleeved, i would suggest the kmc 1000 box. I have 1 for my modern stuff and one for my legacy stuff. I have them sorted by color and and have been super happy.

Card Box 1000

u/Bockon · 1 pointr/Doomtown

I have all of the expansions and have every card sleeved in dragon shield sleeves. These boxes fit sleeved cards perfectly. You might need a couple boxes to fit everything at this point but they are well worth the money. These boxes aren't the same as the plano card boxes or other competitors. The others just don't fit sleeved cards at all.

u/costofanarchy · 1 pointr/mtgcube

Links/Prices assuming you're in the US.

u/Yakmotek7 · 1 pointr/swdestiny

Probably not the best for taking a single deck to a tournament or storing the whole first set, but not bad for now. I used a KMC Card Barrier Box, available on Amazon and typically shipped out of Japan for about $15.

I cut the interior dice trays out of 2x starter sets to fit the larger container openings:

There is room for another 40'ish dice below the trays. Lots of room for 2x decks and the rest of your cards:

Looking forward to see what other people come up with whether it be tackle boxes, laser etched build-a-box, or something else. Thanks for checking it out!

u/Scarecrow1779 · 1 pointr/magicTCG

I got two of these 1000 card boxes and they work pretty well. I can fit 6 100 card, single sleeved decks and another two 60/75 card decks (1 if I want to use a slot for dice/tokens). If only storing 60/75 card decks, then you should be able to fit somewhere between 9 and 11 decks, depending on how tightly you want to pack the cards in.

These are a nice size for me because I can fit two of the boxes in my backpack.

u/spunky10 · 1 pointr/boardgames

Card Box 1000

These fit sleeved cards perfectly. I use these to store Arkham Horror LCG.

Ultra Pro has a similar box but avoid them. Sleeved cards just barely don’t fit.

I also suggest these clear sleeves; super cheap and they allow you to see the art on both sides of the card. Note that they have a foil seal on one side, but they aren’t as obnoxious as they used to be

600 Ultra Pro CLEAR PRO-MATTE Deck Protectors Sleeves Standard Size MTG Pokemon

u/Sky_Octopus · 1 pointr/XWingTMG

Let's see,

  1. I bought SurlyGoodDesign tokens off Etsy and I've generally liked those. Dude sent me some wrong tokens by mistake and immediately responded to my message and sent out the correct ones.
  2. I bought CurledPawCreative templates off of Etsy and those have been really nice. You have to paint them yourself but they come with tape attached so you just have to paint how you want, let it dry, then remove the tape and you're good to go. Tied to this I bought the HighbridgeDesign template tray holder (with the magnetized lid) and tournament tray that all packs up nicely.
  3. I've bought the deluxe movement dials just because they stack on top of each other nicely. Purely cosmetic
  4. My game mat is one of the FFG ones. As long as the whole thing isn't covered in crazy designs then it's not really distracting imo.
  5. I have some larger Stanley organizers for and a basic cheap card box for storing things at home. When I'm actually going somewhere I have a backpack I keep stuff in. It has the following stuff in it:
    1. Hardcase with customizable foam and affordable that I keep my Republic stuff in, including bases and movement dials
    2. Feldherr box for my rebel stuff, including bases and movement dials. This is smaller than the thing above though. The specific one I bought is one that holds the Falcon but it's no longer sold on Amazon at least. But really any of them can work.
    3. The HighbridgeDesign template and tournament trays.
    4. Card Box that has my sleeved cards, obstacles, medium bases, damage deck, and then also contains smaller plastic containers that have my dice, various other cardboard tokens, ship indicators, and my normal tokens.
      1. Token Storage
      2. Dice Storage and misc cardboard


        All that said, my setup time is not super quick but I can take quite a lot with me and it's just lugging around a backpack.
u/derankerdave · 1 pointr/EDH

I know you're looking for a box for a single deck, but here's what I'm using (despite the ghetto amazon page):

I'm not sure about the "1000" card claim, but so far I can fit 7 commander decks plus a boatload of tokens in there, so if you're eventually in the market for compact storage of larger quantities of cards in a single container, this thing has treated me well since day one.

I'd also like to add it likely fits far more than what I have in it - everything is comfortably situated, not tight at all. So it could probably fit up to 8 decks + tokens if you work it right.

u/PoppedCollars · 1 pointr/EDH

I use one of these Harbor Freight cases. The foam is perforated into squares so you can remove it to make custom spots for deck boxes. For my standard and modern decks, I made individual slots for deck boxes to fit.

For my commander decks, I removed all of the foam except one layer around the end and one divider up the middle. Then pop 2 of the KMC Card Box 1000's in there and it holds 16 decks pretty perfectly.

u/thr33littlebirds · 1 pointr/Random_Acts_Of_Amazon

What do you use for organization? I was thinking about getting this, but I'm not sure.

u/GenerousWineMerchant · 1 pointr/EDH

Yes! I am separating my cards into 3 of these boxes + 1 shoe box:

Box 1: EDH Staples that I am very likely to put into a deck

Box 2: Excess EDH staples and cards I may put into a deck, but probably won't

Box 3: Basic land and other junk cards

Shoe Box: junk I probably should throw away and excess basic land

I sort by color:



Non-basic Lands






u/jankyclown · 1 pointr/EDH

I keep hearing good things about the KMC 1000 card box. If it fits your needs, I think it's hard to beat for the price.

u/Modus-Pwnens · 1 pointr/amiibo

KMC Perfect Fit. Like the name, they're just the right size, and they're really high quality, too.

I actually double-sleeved them (put the card in one upside down and in the other right side up) with the matching KMC Hyper Mats (you might need to be careful to get the ones with the clear backs). It ends up being a little pricey but nothing compared to the cost of filling out the card set!

u/sunnyandtony · 1 pointr/lotrlcg

If you are worried about space or you want to overprotect your cards, like if you play daily, I would suggest putting on the KMC Perfect Fit sleeves and then putting your Dragon Shields on. It makes the cards a bit thicker, but they are well protected. When you do it you put the KMC sleeves on upside down.

u/solepureskillz · 1 pointr/magicTCG

You need two different kinds of sleeves. One is commonly called the "perfect fit" sleeve. That goes upside-down over your card. Then you insert your card top-side up into the normal sleeve.

example of a perfect fit brand I use.

u/James718 · 1 pointr/magicTCG
u/Agehn · 1 pointr/magicTCG

When I played in middle school I kept my decks wrapped in rubber bands and I'd carry them that way in my pocket, and keep them that way in a little cardboard box in under my bed. Luckily I never owned any good cards because the condition of those cards is awful now (but the first rare I ever pulled is still in the back of my binder).

Anyway this is what I use now, with the cards sleeved in these and these.

u/SkylightShepherd · 1 pointr/MLPCCG

I use a KMC Perfect Fit to protect the inside as well as a Dragon Shield clear sleeve for the outer sleeve. It is a bit pricey to use this method but it offers the best protection with a water resistant seal that will not require the mane character to be pulled out every time it flips.

u/LuckyLooter · 1 pointr/mtgcube

They are these which I suppose are KMCs. What issue do you have?

u/LadyLexxi · 1 pointr/KingdomDeath

I use Paladin's standard sleeves and also perfect barrier sleeves.

The perfect barrier sleeves are amazing value to price, and they're a lot easier to get than the paladin sleeves

Edit: also in case anyone is interested I use these coin sleeves in a trade binder for easy gear and settlement item management

u/thesolo1 · 1 pointr/pkmntcg

binder I use:link
Sleeves I use: link link

I double sleeve my cards then put them in the binder. Ultra pro sleeves in my opinion are very cheaply made and poor quality.

u/assholeofnew · 1 pointr/magicTCG

Are you thinking something like this? As far as I know you only get them if you custom order a sleeve set first. Unless you mean KMC Perfect fits and any other brand of sleeves

u/dragon3025 · 1 pointr/ExplodingKittens

So are they the same size as the original? Would this pack of card sleeves work well?:

u/Kamilny · 1 pointr/magicTCG

What exactly does that mean? I saw that and was confused. Did that mean use them over things like this?

u/Phocis · 1 pointr/magicTCG

so this for the inner sleeves?

u/Jasoncsmelski · 1 pointr/magicTCG

Get the Japanese perfect fits, not the ultrapro. Dragon shield are fine. I use them too, also kmc matte sleeves are great. Just double sleeve your decks, prevents the slipping you're experiencing and protects them better. Also makes it safer and easier to move cards from deck to binder to another deck.

u/ownageboard · 1 pointr/magicTCG

This is what you want. I got this, and I can't be happier. Just sleeve them up before you put the cards in. I used Ultra Pro Sleeves but penny sleeves work just as well!

u/stabletimeloop · 1 pointr/Pauper

As others have posted, cheap sleeves might not be what you want. However, to answer your question, penny sleeves may be worth a look. They got their name because you can get ~100 of them for roughly a dollar

u/SgtMaj_Obvious · 1 pointr/boardgames
u/auronvi · 1 pointr/boardgames

Without sleeving? Not much you can do there really except don't allow drinks on a table. 2000 cards using decent penny sleeves will not cost that much. I bought a box of 1000 sleeves for 10 bucks so 20 bucks can sleeve that whole game for you.

Two of these will sleeve 2000 cards. 3 will probably cover your needs. Now... actually spending the time to sleeve them? Yeah, it will suck and take time but 30 dollars and a few hours sleeving to protect your investment I think is well worth it.

I will say... these sleeves are not the best quality and don't feel good like dime sleeves do... but you get what you pay for. It would cost you $200 to sleeve using Dragon Shield or the like. Myself? Where I am at with sleeving games I buy Dragon Shield for everything. To me, it's worth it. Sure... I spent more on sleeves than the cards cost for Star Realms by my set is slick, easy to shuffle and play and looks great. I have also sleeved all of EPIC and have sleeves for all of my Mage Wars books (10+ of 60+ cards each). So I buy a ton of sleeves.

So for you on a budget? Penny sleeves.

u/thewookie34 · 1 pointr/PokemonTCG

Top loaders for really expensive cards.

I normally use a thick sleeve idk what they are called bit they are normally a solid color or have a picture on them. And place it in a top loader.

Normally it's like 200 for 12$ on Amazon for non brand picture sleeves.

Here are some examples:

You can get like 100 top loaders for 12$ as well mine came with 100 penny sleeves as well but idk if they all do.

Side loading binder pages. I just ordered these so I have not tried them but a few people recommended them.

I store my bulk in MTG fat packs or in the pokemon world what would be elite trainer boxes.

I also have like 1000 penny sleeves laying around just in case:

I just use old binder I used when I was kid or your can just go to any office supply store and get three ring binders for a few dollars.

u/dkl415 · 1 pointr/boardgames

Penny sleeves here work out to be less than a penny.

u/SolidSnake1118 · 1 pointr/yugioh

These are the ones I got for my cards. 10 packs of 100 sleeves (1,000 sleeves altogether) for 8-9 bucks. They are a bit oversized on the yugioh card itself, nothing to hard to manage though.

u/Buffalo_Hill · 1 pointr/boardgames

I sleeve all of the cards for card and board games. They start to show wear very quickly and my grandfather always bends the cards whenever he puts them down in Ascension.

I use very basic cheap penny sleeves to protect the cards. They're very slippy and can be irritating to shuffle but with so many cards and so many different games they do the job effectively.

u/RedundantPangolin · 1 pointr/boardgames

Here is an example of 1500 black matte sleeves. They come to about 3 cents/sleeve.
Here is an example of penny clear sleeves.
The nice thing about the black ones is that it hides the back of the card. There are times when that is very useful.
I also found an example of the smaller sleeves

There could be better bulk prices. These are fairly quick searches but we have been happy with the black matte at that amount & price range.

u/iPrime27 · 1 pointr/hockeycards

You’ve got some good cards there, especially for just starting out. I recommend putting the better cards such as the McDavid, Tkachuk, Larkin, etc rookie cards into a penny sleeve and top loader or a one touch case.

Penny Sleeve

top loader

One Touch Card Protector

u/jvardrake · 1 pointr/Netrunner

I like these: 1000 Ultra Pro Sleeves.

I've never had any problem with durability, and it's tough to do better than < penny per sleeve.

u/robotsatemycat · 1 pointr/Pathfinder_ACG

I second penny sleeves. I use these---$8.25/1000.


  • the thin, slick nature makes them shuffle really nicely, IMHO
  • unlike heavier sleeves, they actually cost less to use than it would to just replace the entire set of cards with new ones
  • they are actually less than a penny per sleeve (edit: sorry, that's my price with Amazon Prime (free shipping), but you'll come out around $.01/ea regardless)


  • as /u/Torvax said, they are slippery. I'm perfectly used to it and only occasionally do I drop some (when I'm handling a really large stack and I'm not careful about it)

    Also as /u/Torvax said, Pathfinder ACG does have "many piles" :). But none are that large during actual play, and I have no problem with keeping cards stacked or anything.

    tl;dr: penny sleeves are the only option that makes economic sense for Pathfinder ACG. I recommend either them, or no sleeves at all.

    edit 2: sigh, I didn't answer either of your questions. The first one I don't know, the'll need about 500 for the core set, and each adventure deck thereafter (of which there are five) adds 110 cards. I believe the Character add-on deck is also 110.

    edit 3: AAAAGGGHHHH A THIRD EDIT! I forgot...another nice thing about the cheap sleeves: the player cards are actually designed to be written on (WHAAAT?) when you "level up" skills etc (tick boxes to check off). With the penny sleeve you can just Sharpie on that damned sleeve and a) not ruin your card and b) just grab another sleeve if you make a mistake or change you mind or something.

u/Petertwnsnd · 1 pointr/DnD

So, as someone who is relatively new to DMing (started just over a year ago), here's what I'd suggest to make sure you keep your cost down, while still having figures you can slowly replace over time:


Starting off, you can get a lot of generic "green-army-men" style fantasy figures for relatively cheap.

  • Here's some knights
  • Here's some skeletons
  • Here's a random assortment of generic fantasy charcters
  • Here's some undead
  • Here's some barbarians that also just make decent random warriors

    They're not very expensive and what they lack in quality they make up for with quantity.


    The next best solution I have for cheap decent figures is for animals. I've been able to find tubes or tubs of a decent selection of cheap, pre-painted figures at just about every Walgreen's or CVS Pharmacy I've been to. I use these guys for animal encounters, pet companions, and they're especially helpful for my druid.

    If you can't find them at your local drugstore IRL, there's plenty of selections you can find online.

  • Here's just an example of some of the tubes you can find.


    Now, players understand you can't afford unique figures for every encounter. However, I've noticed that the figures you have stand in for whatever they're fighting can sometimes be distracting, or if you have multiple identical figures it can be confusing knowing which one they're targeting in a battle. A great, cheap solution I've found to this is just using multi-colored generic pawn pieces like from the game "Sorry!". The pieces themselves are so nondescript (other than color) that the players have an easier time projecting the combatant you describe onto them, and the various colors make it easier to track what's going on in a battle, both for the players and DM.

    If you can't just salvage an old Sorry game you find lying around you can find packs of the pieces or other generic multi-colored pawns online for very cheap.

  • Multi-colored pawns
  • Meeples
  • Sorry Pieces


    This last suggestion isn't really about where to find cheap figures, but more to address the reason you said you wanted figures in the first place, to "help the immersion".

    You may have heard of the website HeroForge before and it's a great tool for D&D players. It allows you to make very customizable figures for your games. Now, the cost of their cheapest figures are still over $30 for a single figure, so definitely not cheap. However, as a DM, I still regularly use it. I use HeroForge to help design notable NPC's or enemies for my campaign, then save the screenshot of them and post the image in our group chat when the character gets introduced. This is very helpful for a lot of reasons: I get a more solid idea of characters that I was designing in my head, it gives the players a visual and helps with the immersion, and when I DO decide to actually order a character (like, for example, a villain or NPC I know will be reoccurring for many sessions) it becomes a MUCH bigger deal and way more intense.
    I also always recommend that PC's at the very least design their figures on HeroForge for the same reasons.

  • Here's some examples of figures I designed and posted used over the past few months without ever having to spend a dime


    I hope these were helpful. I'm still in the process of building my figure collection as well and love to share cool tips or resources I have found while doing so.
u/That_Guy_Mac · 1 pointr/mattcolville
u/volric · 1 pointr/rpg
u/toiletjocky · 1 pointr/rpg

That's an awesome idea. I found a couple of cool things around the net. These could absolutely work:

u/BriMarsh · 1 pointr/tabletop

What about these?

Link sucks, but search "knight" on that page.

These are even better

u/sylvan · 1 pointr/dndnext

There's a set of cheap plastic knights/warriors for $7 which I think is a great starter kit:

u/Arboghasthero · 1 pointr/XWingTMG

The dials are assembled, I would take a picture but I am at work now. I bought these: BCW Pro 20-Pocket Pages, Pocket Size: 2" x2", 20 Pages - Coin Collecting Supplies

u/Kihnaigh · 1 pointr/KingdomDeath

Going with mage $40 + 1 location addon + 1 event addon + coin binder pages for gear cards and I'm all set for core + gamblers + handful of old expansions; buying sleeves for new expansions at that bridge in 2019.

u/Taboobat · 1 pointr/KingdomDeath

Mage is currently the only company taking orders for settlement sleeves, but yeah they're having massive production problems. I'd wait until they or another company (Paladin) gets their shit together and operates a real store.

For gear grids you can buy these, they fit the gear cards really nicely. Earlier today someone posted a picture of binding those coin pages to sleeves that fit over the cardstock grids, that's probably what you'd want to look into.

u/uberderper · 1 pointr/3DS

I am currently using a plastic 16-game case that fits in my Mario 3DS backpack. I have an idea of what you are talking about here. Its a good idea if you have a large collection and I think the coin one is a good size, the pockets are 2"x2" You may be able to get half sheets or cut the sheets in half and put them into a smaller binder.

u/Tigertemprr · 1 pointr/boardgames

The black tiles are cool. The other modules are OK.

I'd also consider getting 4 pages of these BCW 2x2" pocket pages to keep the upgrade tiles in for easy setup and tear-down. I just cut off the last 5th row.

u/VicVox72 · 1 pointr/KingdomDeath

I should probably mention that this isn't all THAT budget after all:

ikea cutlery tray: $16.99

ikea box: $9.99|us|unbxdsuggestion|201811132211556208_1


17 ultrapro boxes: 17*$1.99 [support a local game store or someone who sells for $1.99, please don't buy them from amazon for $4.50!!!]


Sleeves: about $25 overall, ... note, the amazon prices fluctuate wildly day to day for some reason


SE (note: dont actually fit perfectly):


For the FA , WPs, etc, ..


2 ring binders from Target, $5.99 each.

a little bit of wood from michaels ~$5 + 90min time and some wood glue.


add the sleeves for the cards inside the boxes:

~20x $1.75 for the sleeves:






u/WeavShow · 1 pointr/XWingTMG

I keep my cards and pilot bases in binders:

u/bhfroh · 1 pointr/XWingTMG

These are coin sleeves repurposed for X-Wing. A good substitute for sure!

BCW Pro 20-Pocket Pages, Pocket Size: 2" x2", 20 Pages - Coin Collecting Supplies

u/UniqueNameIdentifier · 1 pointr/KingdomDeath

What about ?

u/Drago6817 · 1 pointr/XWingTMG

I use these:

and these for large ships:

They aren't quite as tight as I would like but they don't fall out if I invert the binder. It works nicely for me.

u/iwrestledasharkonce · 1 pointr/3DS

I just stocked up on DS games at a store that used coin collecting binder pages for their thousands of cartridges.

Carts are pretty hardy, so you could conceivably keep them in a simple cosmetic bag. Lots of cute ones on Etsy that aren't pink satin. I crocheted two drawstring pouches for my boyfriend and I to use for our collections. Of course, with that large of a collection it would take forever to find the cart you want.

I'd say look into the coin collecting stuff for now. Maybe you can find half size binder pages somewhere that would be more portable.

u/rondonsa · 1 pointr/coincollecting

Late response, but I use a large 3-ring binder and a bunch of 2X2 sheets like this. Individual coins are stored in archival-quality Mylar flips, and those flips go into the sheet slots. Much cheaper than buying a Dansco album.

u/yuukino · 1 pointr/steinsgate

Unfortunately I'm almost positive that's a bootleg, especially since that figure runs more than $100 usually. This one however on Amazon, is actually from the Kotobukiya Amazon store, which is the manufacturer. So buying from that link would pretty much be guaranteed a genuine figure. Unfortunately since it's a pretty old figure, she's really hard to find new, so sites like AmiAmi wouldn't carry her.

u/StrikeThatYeet · 1 pointr/AnimeFigures

Got a figure today, it came broken so I'm getting a full refund and a different one.
Anyone familiar with Hanopop? Fulfilled by Amazon but don't want to buy an expensive bootleg Kotobukiya

u/XProAssasin21X · 1 pointr/AnimeFigures

So I want to order the Kotobukiya Makise figure that’s coming out in July, but TOM ended preorders and Solaris seems high with shipping. It’s available for preorder directly through amazon (says shipped and fulfilled) at the link. Is this safe or am I going to get scammed?

Edit: just saw the description of the thread. I am idiot.

u/kingofquackz · 1 pointr/AnimeFigures

That kurisu figure was actually my first figure. I know someone already posted a link to it on amiami, but she's still up on Amazon for 90 dollars, and it has prime available, so it should be guaranteed to be authentic as long as you buy it from a seller who's doing prime shipping.

Generally though, Amazon CAN be dangerous to buy from, if you don't know what you're doing. There's plenty of bootleg out there. However, if you can recognize it soon after you get it, you can file a claim on Amazon, and they'll get you that money returned with the A-z guarantee policy.

u/NekoWafers · 1 pointr/anime

That's a good call and now I kind of want one. I've been debating buying this but I don't really collect figures so it would be kind of lonely.

u/imail724 · 1 pointr/vinyl

What's the best way to make sure my record collection lasts a long time? Is it fine to just store them on a shelf as is in a cool area? Or is it advised to store each in their own polypropylene sleeves like these here? New to collecting so I want to make sure I'm doing everything right.
Also cleaning. Am I good with just one of those brushes like this? Or do I need some spray too?

u/thehoods · 1 pointr/vinyl

Do yourself a favor and buy yourself record sleeves

They'll keep your sleeves from getting ringwear like you see with records in the dollar bins.

u/johndrums82 · 1 pointr/vinyl

I think they're just called record sleeves. That's all I've seen them called.

u/JAMHwithME · 1 pointr/vinyl

I hang four records on the wall and change them out once a week. I also store all my albums in individual plastic sleeves.
So when four are on the wall, I take the records out, put them back in the plastic sleeves and put them back in my bins.
I use these to store/protect my albums:

u/asifsaj · 1 pointr/yugioh

Well I looked up a couple, but they aren't up to six. the First one is a deck box that holds 2 decks and the second is a deck box that holds 3
(First one)[] (Second)[]

u/leebenningfield · 1 pointr/magicTCG

I was planning on buying some of these, and a bunch of these in the appropriate colors. Basically the same as the Duel Deck boxes, without the matching designs.

u/Team_ZS_Kcet · 1 pointr/EDH

Alternatively the oversized ultra pro sleeves with the magic card backing on them work too, they are top loaders.

I don't know about double sleeved, but my single sleeved set fits in one of those 2 deck boxes that have a removable divider in them.

Hopefully this link works

Just toss/ keep the divider and they'll fit nice. I'm one set short of the complete planechase set, but it'll fit all of them easy.

u/JustHere4theNachos · 1 pointr/TransformersTCG

I'm using the binder pages u/ImNotDareDvl linked to for collection storage and for deck storage I got this deck box last week as an experiment:

It's constructed just like one of Ultra Pro's jank plastic deck boxes, which I've never been a fan of, but it fits 2 sleeved battle decks and easily holds bot cards in top loaders (assuming you're using 3.5 x 5 top loaders) for both decks in the larger space behind them. Only lacks storage for dice/counters.



u/chefsati · 1 pointr/EDH

Yep, the satin tower is primetime. I have separate mana magnetic flip boxes for each of my EDH decks for storage, and I bring the satin tower with me to events or friends' houses because of the dice compartment. Very nice product.

u/TheBr0wn · 1 pointr/magicTCG

One of the new Commander decks a deck box and maybe a Pop figure that matches the commanders color.

u/Nsongster · 1 pointr/magicTCG

Something cool like a custom playmat or a lot of card sleeves. Art prints are nice too, and maybe he'd like some sealed product (a Fat Pack or booster box, for example)

A specific recommendation would be the leather Ultra-Pro deckboxes, they're very nice and hold up to 100 cards in case he plays EDH. It comes in 5 colors White, Green, Blue, Red, and Black. Find out what his favorite color is, or what color his main deck is.

u/GotTheClapCantFap · 1 pointr/magicTCG

i have 3 of these and they fit my dragon shielded edh decks just fine, even with my emblems and tokens (in sleeves)

are you sure that you are talking about the same boxes?

u/DontReload · 1 pointr/magicTCG

I'm pretty fond of these clear plastic Ultra Pro 2 Piece. It's pretty sturdy and I feel like if my bag got wet the cards would be safe (wet not under water). I also like being a able to see the commander inside.

Another option I have personally purchased is the Ultra Pro 100+. I like these less but they still do just fine getting tossed around in a bag.

A lot of people really like the Ultra Pro Satin Tower it's very sturdy and has dice storage built in. I think they seem a little clunky but most people love them. They're probably the most "premium" deck box without getting something hand made.

Lastly there are these Ultra Pro Mana Deckboxes that I'd say are good to avoid. The magnetic clasp is far too weak and I've seen people's deck dump in their bag because it didn't hold. I suppose it's personal preference but I think the fake leather looks tacky and makes the box too big. At $15 these boxes are shit.

u/Laterallus · 1 pointr/DnD

I use the spell cards, plus a binder that contains these card sheets. They are in order of the spell level, then alphabetized.

In the front of said binder, I keep another few pages with my cantrips, spells given to me by the Domain, and the spells I've chosen for the day. These pages are separated by a page divider for easy flipping.

On a separate sheet of paper, in or out of the binder, contains my play session's notes. in these notes will be tallies of how many times I've used my CD, spells slots, and other abilities. It sounds like a lot, but once you're done setting up you'll never really lose track of your spell counts, etc., so long as you aren't too drunk.

u/floralcode · 1 pointr/AnimalCrossing

I... just have them all in a pile that I move around. Right now it's on my nightstand! Can't you just get a sleeve like this and put it in a binder? You could even get dividers to organize the series/etc. I kind of want to do this, but I don't want to give myself an excuse to buy more amiibo cards!

u/motionmatrix · 1 pointr/ImperialAssaultTMG

I use this binder. It has pockets that can handle all the paperwork, manuals, character sheets, etc.

I use these for the small map pieces They go in the binder.

I use these for larger map pieces. They also go in the binder.

All dice, tokens, and cards go in this box.

I ordered the box inserts for all the boxes from these guys. That covers all the minis except for the largest stuff (AT-STs), which got a case from them instead.

u/Keokothelesser · 1 pointr/FinalFantasyTCG

I just use a 4 or 3 ringed binder and use these

I back to back cards, so you get essentially 6 different cards per insert. I also use the ultra pro soft sleeves when in folder.

I just have them in serial order. 1 folder for Opus 1, 1 folder for Opus 2 etc

u/AmiiboPuff · 1 pointr/amiibo

If you don't care about the outside design, any basic binder should work with your basic trading/collectible card binder sheets. Like these for example.

Any retailer or hobby shop that carry Magic/Yu-Gi-Oh!/Pokemon/MLP or Baseball cards should have them in stock as well.

u/AbysmalVixen · 1 pointr/dndnext

I’d say a folder for the ones that will fit. For the smaller ones you could do some [Binder Pocket Protectors] ( and have them easily accessed and separated in a binder. For the ones that are huge, I have no idea as I’m sure you don’t want to fold them up

u/itsok_imapirate · 1 pointr/RandomActsOfPolish

Using trading card sheets, I was finally able to organize my stamping plates. They hold the small standard round plates with room to spare, they will even hold some of my larger plates! I found that buying these and sticking them in a binder was way more cost effective than buying those little Pueen holders.

Edit: these are the card holders I used

u/asdjklghty · 1 pointr/pkmntcg

Here is a post I made earlier about getting into the game.

>To give you an idea on deck building, here are some information that you will find helpful.



>Now, I will also give you some important information what stuff you need to play your deck.

>Purchasing cards

>For purchasing cards, I recommend buying a booster box and an elite trainer box for each new set that comes out then purchase singles. An elite trainer box also gives 5 of each Energy type and burn and poison markers as well as nice dice! One for flipping and the others for keeping track of damage They're made of acrylic, not cheaper cardboard that come with preconstructed decks.


>Also, I can't stress this enough but, you need sleeves. I recommend Ultra Pro Matte Sleeves. You would need 66mmx91 mm ones to fit Pokemon cards.


>You can never have enough sleeves. Extras are used to replace ones that look worn out. If you play with worn sleeves (marked) you can get in trouble.


>Another important thing is a play mat. I really don't like seeing players struggle to scoop up cards on the table instead of a mat; damaging their sleeves in the process!


>Deck Boxes

>Get a couple deck boxes. I prefer boxes that match the colour of my sleeves. These tower ones are the ones I use. They store a lot of cards and you don't need dice bags to store your dice!



>Lastly, you need dice. They are used in place of damage counters and coin flipping. For coin flipping die (in competitive play we use them instead of coins), you need a clear one. The rules state you need to.



>Storing cards

>I store cards in a mix of binders and boxes. For binders, you either can use these or try to save some money and get these and these

>For boxes to store non-EXs, secret rares and Trainers, I use [these[(

>You also can use cardboard boxes for cheap here but I don't like them because they aren't secure.

>You can always check out other sites for the same or similar items.

u/tallsmartman · 1 pointr/DnD

As a wizard player, I use this and a 3 ring binder. I have my cantrips on the first page, and my prepared spells on the next 2. It's super convenient.

u/sgol · 1 pointr/boardgames

I’ve had success with these , fitting up to 13 in a single slot, sleeved.

Needed two of these to carry them all.

u/Fmradiochick · 1 pointr/Random_Acts_Of_Amazon

My little sister absolutely loves [Ariel] ( and I'm sure she'd be ecstatic to add this to her Funko collection :)

Thanks for the contest!!!

u/paradoxikal · 1 pointr/Random_Acts_Of_Amazon

I'm not artistic/creative, but I was pretty proud of myself for making an earth egg this Easter!


Thanks for the contest, your bunny racecars are super cute!!!

u/Mistywing · 1 pointr/anime

Pretty much yeah. Labeling or other text based errors happen officially frequently across many things.

I mailed Funko Pop back in 2014 because they were selling their "Vinyl Figure" as "Chiffre de Vinyle" in French, which basically means "Vinyl Number." It's a homophone translation error. They still have the old pictures up on Amazon.

u/suckinonmytitties · 1 pointr/Random_Acts_Of_Amazon

I have a feeling you might own this though? Either way happy almost birthday! If chosen I would pick this because I love pumpkin and fall smells

u/saroka · 1 pointr/Random_Acts_Of_Amazon

Nice to meet ya!

Yep I like gifs. :)

Ariel Funko Pop you might like. :)

u/krq316 · 1 pointr/Random_Acts_Of_Amazon

A very happy birthday to you!!!

Everyone loves a little Funko Pop now and then

u/Gaming_Gal · 1 pointr/Random_Acts_Of_Amazon

Dinsney. My childhood was the lion king. Every single night I would watch the movie until I fell asleep. I couldn't and wouldn't fall asleep without watching it. My parents said it drove them crazy when I woke them up asking for them to replay it for me. I watched so many movies as a kid like little mermaid monsters inc. and nemo. Link for something adorable I found

u/sylviag4949 · 1 pointr/Random_Acts_Of_Amazon

OMG , because she's too cute , and of course FUNKO!! :-)

u/jphoenix · 1 pointr/Random_Acts_Of_Amazon

Welcome to RAoA!! Happy to have you joining us and thanks for the quick contest! That's awesome of you! Hi!

My order would be: Silver Linings, Argo, Les Mis.

You rock!

Next purchase is going to be this Ariel figure for my grandma for mother's day

u/catamountgal · 1 pointr/boardgames

Amazon sells this which has the cards to make the base game up to 6 players, but many don’t recommend playing it with that many players.

u/annodomini · 1 pointr/dominion

The regular base set is just called Dominion. This is a fully playable game, and the cards have the simplest mechanics, so it is good for getting started.

Dominion: Intrigue is an expansion, but it comes with all of the base cards (coins, victory point cards, and curses) necessary to play the game, so it can be used as a standalone game or an expansion for the base game.

All of the other expansions require you to already have the base cards. However, you can actually buy the base cards separately, and buy an expansion that doesn't have them, if you really don't want to buy one of the two sets that includes them. You'll then need to download the basic rules online, since the rules for each of the expansions just describes the rules for that expansion.

I think the best options for starting out would be just getting Dominion, or maybe that plus one or two expansions, or getting Dominion Big Box which includes the base set and two expansions (Prosperity and Seaside). You could also just start out with Dominion: Intrigue if you wanted.

Dominion is best with 2 players, but I think it works well for 3 and 4 players as well. It's definitely a lighter, more random game with 4 players, while you can really get into the strategy with 2 players; both are fine, depending on what you're looking for. If you combine Dominion and Dominion: Intrigue (or add an extra set of base cards) you could play with up to 6 players in a single game, but I think it would really start to drag at that point. Better to just play two 3-player games instead.

/u/r2d8 getinfo long

u/gunnarsig · 1 pointr/dominion

I see everyone here doesn't like to play with 5+, when I have to agree it makes for better games to split up to 2 and 3, you should try yourself anyway.

And for that you need another set of the base-cards(can be bought alone like this , or through buying 1st edition Intrigue) . I will recommend buying the base cards itself because, the 1st edition of Intrigue isn't that great in comparison with other expansions.

When you have the extra base cards, and if you don't want to split your group the extra rules is like this:

Instead of 12 Provinces, you play with 15 for 5, and 18 for 6. All other victory cards are the same number(except the starting estates which ofc is three more). And the game is over when any four supply piles are empty, or the provinces are empty as usual.

Remember to also add 10 extra curses for each extra player, and add all the extra money from the base cards.

u/JB4GDI · 1 pointr/boardgames

Assuming you purchased the regular Dominion set, or the base cards set my recommendations are unchanged from here

Prosperity - This is the most straightforward and fun expansion, and can actually lead to shorter games with all the big money cards. #1 purchase for sure.

Guilds - Excellent cards to mix in with a big box. Love the new coin mechanic, since it's easy and fun.

Seaside - Duration cards can be hard to keep track of, but excellent cards all around here.

Hinterlands - Great to mix in with something. Nothing too fancy, just fun.

Cornucopia - Good batch of cards, but because they focus on a varied deck, some cards can be super weak.

Intrigue - Some good cards, but by adding choices to everything it really slows down the game.

Dark Ages - While there are some awesome cards here, most of them increase the complexity, leading to way
longer games. Recommended for very experienced players only.

Alchemy - The least fun expansion. Requiring the potion cards to buy is a weird mechanic and a lot of the cards are just not great.

u/anonymous_redditor91 · 1 pointr/dominion

My favorite expansion is Dark Ages, but Intrigue, Seaside, or Prosperity are also all good picks for your first expansion. I'd look on the Dominion wiki for the list of cards to see which one you'd think you'd like best.

> Also, if I want to play this game with 5-6 people, do I need another version of the base game?

You need additional base cards, which you can buy by themselves.

u/DeftMunky · 1 pointr/boardgames

Why sleeve Dominion when you can just buy another set of the core cards?

I think the main reason to sleeve a game is to prevent the wear from unbalancing the game. For Dominion, knowing if you're going to draw a copper or estate changes how you play. Getting a fresh set of those cards helps the wear on them be less apparent.

u/PronouncedOiler · 1 pointr/dominion

If you don't, the new style base cards are pretty cheap.

u/Mr_Momomoto · 1 pointr/boardgames

I have one of these with a bunch of card games in. The games change occasionally, but here's what in it right now:

  • Red7
  • Loot
  • Mystery Rummy: Jack the Ripper
  • High Society
  • Hocus
  • Little Devils
  • Linko!
  • Koi Pond
  • Kigi
  • Pairs
  • Coloretto

    Packing for game nights, I pretty much grab 3-6 games, plus this box. It's great.
u/HotforSega · 1 pointr/Pauper

Dude just put your cards in a ziplock and toss it in your backpack.

Jk I uses these (Ultimate Guard Stack 'n' Safe Deck Box (480 Cards) I have two in my backpack. It's a little bulky but they work well and were pretty inexpensive. I just keep a slot open for dice and some tokens.

u/Tosplayer99 · 1 pointr/FinalFantasyTCG

If you are a player and less of a collector, I have a binder where I put my sleeved (KMC or UltraPro) Foil or Ultra Rare cards since they wont be used and are just for "prestige".

From my Common-normalRares I have a big deckbox with one of those Drybags which will help protecting the cards from moist air.

Here is the Deckbox I use

I mean in the end - you paid money for the cards so why not protecting them from dust and moist air. If like you said I have cards that are common but very commonly used or very good Ill sleeve a playset (3) of them.

I use only 2 Colors, Green and Orange Sleeves, green are all cards I use for decks and for playing so I can quickly build or change a deck without needing to unsleeve and resleeve cards (I mean I have my deck + like 30 other possible deck support cards in those sleeves, no every card) and the orange ones are for cards which have a high value or are for selling or trading.

u/generaltechnobi · 1 pointr/yugioh

I use these for bulk storage. They hold about 840 unsleeved cards each, and they'll be nicer to your cards in the long run than tins.

u/drhman1971 · 1 pointr/killteam
u/ImmortalCorruptor · 1 pointr/magicTCG
  • Take your time learning. Magic is kind of like Chess in the way that it's simple to pick up and play but takes a lot of time and effort to master and no one becomes a guru overnight.

  • If there are any specific cards you're looking for it's usually cheaper to buy them individually instead of gambling with booster packs. There's a chance to pull some $20+ cards from boosters but the odds are heavily stacked against you.

  • Know what your cards are worth and don't be afraid to turn down a trade if you aren't 100% certain of the value of everything involved.

  • Always keep your expensive cards protected and keep your decks stored inside of deck boxes so they don't get crushed or bent. Using rubber bands to keep cards/decks together can seem like an acceptable budget solution until they start to bend or wear the edges of the cards, which turns a $50 card into a $0 drink coaster.

  • It's definitely worth investing into some card sleeves for your decks. They make decks easier to shuffle and prevent your cards from getting dirty. I can't tell you how many times I've seen people open a valuable foil rare from a booster draft, play it unsleeved for the tournament and then find out that no one wants to trade for it afterwards because it's completely scratched to hell.

  • You also might want to look into getting a playmat. It's not nearly as mandatory to have as sleeves but it helps extend the life of your cards even further, it guarantees that you'll be playing on a clean surface and it helps mark your space at a table.
u/traceurling · 1 pointr/magicTCG

Sorry I'm a little confused, are you offering the KMC Hyper Matte Black or the KMC Perfect Fit, I'd trade for either but I'm more interested in the Hyper Mattes.

u/johnnywi · 1 pointr/oldschoolmtg

Ok, thanks for that advise. I looked at some Amazon reviews for KMC sleeves, and some mention quality degraded lately ( Have you experienced that?

u/Ravengm · 1 pointr/boardgames

Aside from something ridiculous like laminating all of your cards, sleeves are your best option. I highly suggest matte sleeves of some kind if you're annoyed at the sleeves being slippery. Both Ultra Pro and KMC have them, and potentially another company, but those are the ones I know of.

u/spelunker · 1 pointr/boardgames

Dragon Shields and KMC are regarded pretty highly over in the /r/MagicTCG community. I own some KMC Hyper-Mattes and the quality is great.

Neither are the cheapest of options, mind you, but I think they're worth the investment.

On the cheaper tier, apparently UltraPro Mattes are pretty decent.

u/I_Hate_Robots · 1 pointr/pkmntcg

Best bet for storing a large lot of cards is cardboard boxes such as those you're seeing online. Anything will do, really. If you're concerned about the long term health of the cards you'll need to keep them in a watertight container in a temperature controlled room.

As for card sleeves, most folks will use one of the following (listed from most to least durable, roughly):

u/Brohanwashere · 1 pointr/magicTCG
u/DonOblivious · 1 pointr/Pauper

$25 on Amazon doesn't go far when you're buying commons. The sellers there pay much higher fees than on TCGPlayer and the card prices will reflect that.

A $.90 card costs $1.20, $2.80 costs $3.40, $0.70 costs $1.11, etc. The $15 white tokens deck /u/tommamus linked is just shy of $30 on Amazon.

I'd steer you towards buying something like sleeves instead. Those are around 40% off what my shop charges. Funnily enough, I bought mono-w tokens in the shop a few weeks ago and it was ~40% cheaper in the shop than it would have been if I ordered it from Amazon.

u/sunshinecid · 1 pointr/tabletopgamedesign

I've printed cards on colored cardstock before but there are a few problems with it from my perspective. First, it's not exactly the right weight. Second, cutting them properly is more difficult than cutting paper. And third, they're pricier than plain paper printing so it's more risky.

For me the most cost effective method for printing has been using nanDeck to set the layout and make the PDFs. I print on standard printer paper and put them in sleeves. They're a little of an investment, but you can re-use them for a very long time.

I buy these cores and these sleeves, they're Bridge Size (2.25x3.5) and come to about $0.0655 apiece for 500:

However, while looking I also found Poker Size (2.5x3.5) for about $0.5618 provided you buy 1000:

You could likely find 'em cheaper by looking for the best deals all over.

u/zakarranda · 1 pointr/boardgames

Not an expert, but I've been using these ones and they've been working well.

u/Dannyboy1302 · 1 pointr/legendarymarvel

These are the ones that I use and I live them. Feel tight on the cards and cheaper. Ultra Pro 100 Pcs Soft Card Sleeves, 2 5/8 x 3 5/8-Inches (5 Pack)

u/StefanGagne · 1 pointr/dropmix

To be clear, are these the ones you're talking about? (I'm totally new to card sleeves and want to make sure I get the right ones.)

u/LogicBalm · 1 pointr/VS2PCG

I think it was these

I will be the first to admit that they are cheap sleeves and probably not intended for gaming but they are inexpensive and so I can have all my cards in my collection sleeved and not resleeve when they go in or out of my decks. I keep everything in the Core box but organized well enough that I can find any card I need quickly.

u/Rikitiki25 · 1 pointr/MarvelLegends

NECA Action Figure Display Stands (Pack of 10)

They work pretty well with some of them

u/Vonnegut9 · 1 pointr/ActionFigures

Have you looked into the stands NECA sells? LINK

u/Mr_Miggie · 1 pointr/ActionFigures
u/Slightlylyons1 · 1 pointr/starwarscollecting

I use these and a little hot glue on the feet.

u/Pookabbit · 1 pointr/Indiemakeupandmore
u/poweredbyanxiety · 1 pointr/Random_Acts_Of_Amazon

I would like the baby groot!

A recipe you say?
Well here's my Aunts amazing artichoke and spinach dip:

1 can artichoke hearts
2 boxes of frozen spinach (or you could get fresh spinach and do the whole cooking it thing but idk how much that takes)
1 entire stick of butter
1 package of cream cheese
1lb cheddar cheese
1 medium sized onion
1/2 cup parm cheese
1 tbsp sugar
1 cup sour cream

First you're going to want to get those onions cooking. Cut the onions into medium/small pieces. Get a frying pan and put it on medium heat. Put the entire stick of butter and let it melt then add the onions and tbsp of sugar. You're going to want to wait until these are completely caramelized. So put a lid on it and let it cook until they are amazingly golden brown and nom.

While that's happening preheat the oven to 425.

Next defrost those two packages of spinach. This takes a minute if you have a 500 year old microwave like I do. Get them completely defrosted until they are warm. Then you need to strain all of the water out. I get a colander and a big bowl and use my hands to squeeze all of the water out over the colander. (This way any pieces that fall are caught.) Squeeze that spinach until every single drop of moisture is gone.

Get those artichoke hearts and cut them into good sized pieces.
Grab your cheddar cheese and grate all of it.
I put my cream cheese in the microwave for about 30 seconds so it softens.
Measure your sour cream and parm cheese.
Now throw everything in a big bowl, all the ingredients.

Now is the really messy part! You could use a spoon or a spatula or something, but I use my hands because it's the easiest. Make sure you wait a minute until the onions aren't scolding hot to do this. Mix it until it seems like everything is mixed thoroughly and then grab whatever pan you want to put it in.

Honestly, I use a bigger sized pan but you can use whatever you want. You could even put it in little souffle cups if you wanted to.

Grab some more of that parm cheese and sprinkle it on the top. Now put it in the oven for about 15-20 minutes or until it's golden brown on the top.

The best thing to eat it with is tortilla chips, but you could use absolutely anything.

WARNING: THIS STUFF IS AMAZING AND IS PROBABLY AROUND 9823287 BILLION CALORIES. SO I WOULD recommend NEVER making it unless you have to take it somewhere. If not you may get diabeetus or have a heart attack because once you have some you want all of it. trust me

Edit:Happy funko friday!

u/millerjef · 1 pointr/AmazonSellerTools

Omg! I was able to sell this at $21! So glad you shared these tips..thanks!

u/cajun_super_coder2 · 1 pointr/geek

It's a bobblehead. I bought it for my wife this Christmas. :)

u/kairiserene · 1 pointr/Random_Acts_Of_Amazon
 When the Snow Falls Down<br />

Christmas Magic Every Where

Fills the air with LOVE!

If I were to win, I'd love this little Groot!

Happy Funko Friday!

u/lilmissRoja · 1 pointr/Random_Acts_Of_Amazon

I'm sorry for your loss. It's very hard to lose a friend. But it really does help to think about all the fun times, and great memories you have with that person. But, if you need someone to talk to, please feel free to send me a PM. :)

A few years ago, I deployed to Afghanistan. Early on in my time there I became really good friends with a guy named DD (his nickname for privacy purposes). He was also a military member. Well, unfortunately he had a longer deployment cycle than me, so I ended up leaving before his unit. And DD, he didn't make it home at all. He was killed when his truck hit an IED. This happened 3 weeks after I got back the US.

Sadness aside, the things that really helped me cope with losing my friend were the memories we had made while we were able to hang out over there. (Which, was actually quite often. We were practically each other's shadow. Us, and our group of mutual friends) Among those memories, one really stands out to me. Well, one day I had to go out on a mission myself, and while I was out I was able to purchase a set of drum sticks for him. So when I got to our base, I handed the drum sticks to him, and he just had this look of a child on Christmas. Like, he couldn't believe that anyone would be so thoughtful to bring him something related to his absolute passion. From then on out, I almost never saw him without those drum sticks in his hands.

As crazy as it sounds, I think he knew that he wasn't going to make it back. There was one day where we sat down to chat, and he just had this real serious look on his face. We start talking, and the topic of those drum sticks come up in conversation. It wasn't until then that I realize how much of an impact just a small random act of kindness towards a friend meant to him. Something I had only done on a whim to make a friend smile. Well, I guess it meant more to him than i'll ever know because he asked me, should he not make it back from overseas, to lay a set of drum sticks on his grave.

That experience really made me realize just how much of an impact you can have with even the smallest gestures that might seem meaningless to you. But, even just thinking about how happy he was to recieve such a simple gift, it really made me smile then and still makes me happy to remember it now.

As for an item, I'd have to say this would be great to have on my desk at work. It would definitely make me smile more haha

u/awkwardlittleturtle · 1 pointr/Random_Acts_Of_Amazon

I am Groot.

I love dandelions... I love how they randomly pop up everywhere, and are impervious to most attempts of eradication. Plus, they are so bright and colorful!

Don't drink the hand sanitizer.

Thanks for the contest!! :)

u/doobzilla92 · 1 pointr/GotG

it looks like a funko pop. if so you can find them at a lot of places. I get mine from my local comic book store,but you can find them online too. Here it is on Amazon

u/sleepytigress · 1 pointr/Random_Acts_Of_Amazon

I see that you have Guardians of the Galaxy on your wishlist, so what about this little guy?

u/ItsACharlieDay · 1 pointr/Wishlist
u/MohnishMohnish · 1 pointr/Random_Acts_Of_Amazon

Wow you're awesome!
I'm gonna organize this list from most wanted to least wanted :D

  1. Bluetooth headphones! this was reviewed by unbox therapy and apparently it's really god so I wanna try it out :D

  2. AmazonBasics Ventilated Adjustable Laptop Stand Who doesn't need a laptop stand eh? i hate burning my lap while I'm using my laptop!

    3.PNY Turbo 32GB USB 3.0 Flash Drive A 3.0 usb is hard to find for such a price! and the storage space makes it so much better :D

  3. Shoes are nice to have right?

    5: Baby groot! Because I loveeeeeee groot

    thanks for doing this :)

u/Harshith08 · 1 pointr/IndiaNonPolitical

Tagging on if u/ttrublu delivers.. mereko bhi please 🙏

u/Manhoosvyakti ye wala pasand hai? :D

u/PrasanthRangan · 1 pointr/IndianGaming
u/drcrombi · 1 pointr/Random_Acts_Of_Amazon

Everyone's favorite Funko.

Edit: and you should listen to Last Cup of Sorrow by Faith No More. Found out they are touring soon and am on a total FNM kick right now.

u/otakudan88 · 1 pointr/comicbooks

I rather get this version of baby Groot

u/DarkStar140 · 1 pointr/cardsagainsthumanity

I use these sleeves, and they work great. KMC 100 pochettes Card Barrier Perfect Size Soft Sleeves are what they're called.
Here's the link:

My cards don't slide around at all. They're very snug in the sleeve. I can take a picture for you, if you'd like.

u/The_Last_Raven · 1 pointr/PokemonTCG

KMCs are ones that Magic players use and should work well as inner sleeves for double sleeving. My personal preference is to use KMC Hyper Mattes and over KMC perfect sleeves for inners.;amp;psc=1&amp;amp;refRID=E66TXR5758C2MEN8WQ0Q

I go through a TON of sleeves for MtG (play pokemon casually), so those are what I use for tournament play and the $56 is well worth it for me.

Edit: If you want to see more about sleeves for reviews, I suggest watching the Professor's channel here:;amp;list=PLvqw7t0kbGX9ZlOrr9sqD8zGGPuEIfeBz

Primarily for MtG, but all of the sleeves he reviews generally are kosher for tourney play.

u/Reposer · 1 pointr/PokemonTCG

Second in regards to protecting it - the best method would be a perfect sleeve followed by any form of deck protector and then into a toploader - and of course keep it in a dark place that's relatively temperate, if possible.

In regards to your question - it really just depends on if you need money now or not. It will rise in value as time goes on for sure, so if you're not hard up just keep it.

u/Bryanfisto · 1 pointr/magicTCG

I sleeve all of the tokens my deck uses to protect the surface (for cosmetic and consistency reasons, not because I care about a &lt;$0.01 "card"). I use KMC "perfect fits" because they're cheap in bulk, fit snug to the card, and make the surface more slippery for moving the cards around.

u/GrimSanto · 1 pointr/dropmix

Oh nice, I am totally getting that case. Thanks for the info. I ended up going with these sleves -KMC 100 pochettes Card Barrier Perfect Size Soft Sleeves, 3 Packs;amp;psc=1 They fit the card just right.

u/reaper527 · 1 pointr/magicTCG

for my decks, i typically use art sleeves such as these. since art sleeves have a tendency to be hard to get the same sleeves a year or two down the road, this means i'll pick up an extra pack when i'm making a deck so if sleeves tear on me, i'll be covered.

as such, this means i have plenty of extra sleeves that i can throw in binders. i'll throw my cards in a perfect fit, then throw that in one of my art sleeves, and put that in my side load binder.

u/DragoBrokeMe · 1 pointr/boardgames

I love sleeving cards for my games! Love the feel and I actually double sleeve (these then these for regular sized cards) and generally do it while it while watching TV some night, so it's not like I have to give up time to sleeve.

u/abaloneyhasnoname · 1 pointr/pkmntcgcollections

While you may not be pricing the cards, using the pricing guide on is a good place to start organizing specific sets. It can also give you a general market value for all conditions as you are organizing. If you see the market value on a specific card is much higher than others in the set, you should consider protecting that one with penny and hard sleeves(or depending on the card, perhaps more than that). If you are going to store your cards in binders, i recommend these sleeves for inside sleeves and these sleeves for the outside soft sleeve prior to putting in a binder like this or like this.

u/dontdrinkandderive · 1 pointr/pkmntcgcollections

really....? i have these kinds that i use for all my rares/holos/full arts... ALSO, i recently ordered these yesterday because i heard their were perfect for the Rares:;amp;psc=1

Should i switch to the KMC Perfect fits when they arrive and avoid the Ultra Pro sleeves then?

u/MapleA · 1 pointr/pkmntcg

It’s better to get perfect fit cards meant for double sleeving which would fit inside of traditional sleeves. The advantage is that if any liquid spills the double sleeved cards won’t be affected at all. It has saved my ass so I double sleeve important cards and the deck I play with.;amp;qid=1525730862&amp;amp;sr=8-4&amp;amp;pi=AC_SX236_SY340_QL65&amp;amp;keywords=perfect+fit

u/brand0n · 1 pointr/boardgames

hello friend, that's awesome that you have your own copy of MK. Are you shuffling cards via bending method? If so I'd try to stray from that if possible.

The KMC perfect fit sleeves are amazing.Here's the exact amazon like to the ones I ordered. There are 240 cards so this gives you 60 extra. Link

I'm waiting on coolstuffinc or amazon to stock the Lost Legion

u/Dmbb1239 · 1 pointr/mtgcube

Hey bud, I have an innistrad plane cube for drafting thats pretty sweet. I can go over what I did if it helps at all.

I started with only Innistrad, great Draft environment to use as a base. Then I replaced all of the vanilla creatures or unplayables with another card from DKA, AVR, or SOI that fit the same role but had a relevent ability or stats. (Ex. a 2/2 zombie for 1b that had no abilities was replaced by a 2 mana zombie in the same rarity with more relevent abilities)

Right now the cube is about:
50% INN
20% DKA
10% AVR
20% SOI

Im trying to recreate a draft environment so I manueally create packs and put them in team bags ( to have them ready for each draft.

The slits for common, uncommon and rares is (5/3/1)
I keep flip cards seperate, the are split (3/2/1)

When I make packs I shuffle all the commons together, then repeat for uncommons, rares, and Flip cards.
Each pack is 9 Commons,3 uncommon, 1 rare, 1 flip card, and 1 land. The land could be any nonbasic land from any Innistrad set, put in for fixing and utility.

Right now my rares can be from any set and are pretty balanced, nothings unbeatable.

I also keep the flip cards in clear hypermattes while drafting and playing, but I have a checklist for each in a black sleave for proxying in the deck.

It is alot of sleaves and the cube fits a normal 2 row. But if you buy bulk, its not too bad. Heres where I got mine (;amp;ie=UTF8&amp;amp;qid=1465811659&amp;amp;sr=1-2&amp;amp;keywords=perfect+fits,;amp;ie=UTF8&amp;amp;qid=1465811692&amp;amp;sr=1-1&amp;amp;keywords=kmc+hyper+matte+10)

If you have any questions or I wasnt clear just let me know.

Sorry about the formatting in advance!

u/FriendlyScolopendra · 1 pointr/nfl

Buy perfect sleeves and a size larger of sleeves, dragon shield or the like, and then place them into binder sleeves in cool dry places.

Edit: And by perfect, I mean the perfect fit sleeves, these ones:;amp;qid=1551300997&amp;amp;s=gateway&amp;amp;sr=8-5

u/amahumahaba · 1 pointr/magicTCG;qid=1527696059&amp;sr=8-2&amp;keywords=perfect+fit

This is likely the best price you are going to get on Perfect fits. Its about what you are going to pay for 4 packs of perfect fits at a store.

As for sleeves, i would be using dragonshield matte sleeves or kmc hypermatte sleeves.

The best price on dragonshield sleeves is going to be at starcity games open events at about 8$ per box of 100. But you can get them for 10-11 at local game stores in the likely situation that you aren't particularly close to an open.

u/mirhagk · 1 pointr/magicTCG

For all my double sleeved permanent decks I use Dragon Shield Mattes with KMC perfect sizes. Dragon shields are relatively cheap and good quality and KMCs are on amazon for ~$4/100

For my draft sleeves I use ultimate guard katanas. They are lovely sleeves with amazing shuffling feel but they are harder to get/more expensive. Since my draft sleeves are the one pair of sleeves I use more than any other I shell out a bit more for them.

u/VirtualAlex · 1 pointr/boardgames

KMC perfect fit sleeves:;amp;psc=1

$23 for 1000 high quality clear sleeves.

u/trowayit · 1 pointr/arkhamhorrorlcg

I use these:;amp;psc=1

I sleeved everything with the blue/black/gray back and the act/agenda/locations. Took less than one 1000 pack Didn't do the encounters yet because I'm out of storage space and pondering how to reorganize. I sleeved fuckin everything for gloomhaven. :)

u/ComicDebris · 1 pointr/BudgetBrews

I buy these:;psc=1 . I guess that adds $2.78 to the deck cost.

They split sometimes. But usually I double-sleeve, so it's not a problem.

u/Integrals · 1 pointr/boardgames

I've used about 20 different sleeves and by far the best bang/buck are KMC Perfect Fits. They are also not as thick making them easier to fit in the box.;ref=yo_pop_mb_pd_title

u/Maso_del_Saggio · 1 pointr/VS2PCG

Ok Thanks good to know! Right now for my old Vs system collection I use these ones:;amp;psc=1

They are very nice and transparent, even though they may be slightly too tigh, and the card tend to curve a little. In a 9 page collector after a bit the card adapt to the size, but I am not so fond of using them for cards that I use for gaming.

So I am still not sure. Maybe I will update with a post when I will try more

u/Drunkpanada · 1 pointr/boardgames

I usually go by cost. I find that even if you buy the cheaper ones the replacement cost is minimal. I usually have excess of what I use. I think I have primarily Mayday Sleeves with a sprinkling of Fantasy Flight. Also for standard size I buy this once in a while. Bulk pack of decent sleeves (I did Legendary with them, as well as many other Standard size cards);amp;psc=1

u/GrayFawkes · 1 pointr/cardsagainsthumanity

I bought these

I really like them since they fit perfectly and snugly around the cards. The ultra pro standards are a little to big for my liking.

u/JT-Shadow · 1 pointr/legendarymarvel

I just bought 4 packs of these KMC Perfect Fit, 4000 sleeves (only 3000 needed but I want to be prepared), as soon as I realized they're the company that makes hypermat sleeves, it was an
instant buy

u/windwolf777 · 1 pointr/EDH

I only have 1 deck at the moment, however I have a few yugioh decks and [this] works absolutely wonderfully. It comes with several velcro dividers that can keep your decks separate,

TCC did a review of it [here] starting at 5:08. I also recommend just going through his entire review series.

Oh.....Huh, interesting choices gatherer

u/CurtLablue · 1 pointr/swdestiny

I bought this that can hold 4 ultra pro boxes with a central divide for tokens. It's a little more expensive but works amazing. I put my deck in one box and my dice in another. So I can carry two full decks and tokens in an awesome carry case that is well made.
How I use mine.

I guess it's currently out of stock but it's 50 bucks when it's back in Stock and it's one of my favorite buys.

u/Sharpmint · 1 pointr/magicTCG

No plans for it currently!

I think you should petition Quivertime to make a 2-row case - they can probably get to market faster than I could at a lower cost.

Though if they don't want to, I guess a Kickstarter could be arranged many moons from now.

u/bunbunfriedrice · 1 pointr/magicTCG

This is awesome! I actually just recently started doing the same thing. I'm aiming for 60 cards each for CMC 1 through 8. Then it drops off quickly for 9 and up. Please check out my list here (it hasn't been trimmed yet) and let me know if you have any recommendations!

Can you tell me more about your rule changes? Looks like your tokens go into the graveyard--but are they still tokens? E.g. is bounce still removal? I actually like this interaction as it allows for more spot removal. In general I tried to choose cards with lots of interaction.

You also added a morph element? How does that work?

It looks like you're triggering cast effects? Otherwise Desolation Twin seems odd. Also why Prowling Serpopard?

I've also considered being able to activate Momir's ability twice per turn. My slots for 3 and especially 4 have lots of spot removal, so it could be an interesting choice to choose, say, two 4 drops vs one 8 drop when your opponent has a big threat.

Let me know! Excited to hear about a fellow paper Momir player!

PS This carrying case is awesome.

u/Karliente · 1 pointr/magicTCG

So this is also a very late reply but for everyone still looking for a solution - I think I found it for me.

After hours of searching I finally ended up buying a card case made by Quiver.
What can I say - the quality of the case is brilliant and it almost seems like it was MADE for those 10 guild kits, considering how they perfectly fit into the case.

At the top there is still space for some accessories like the 10 life dice, the badges and so on. I put some extra modificator dice in, as well as a self-made summary of all the guilds.
Even with all the accessories the case still closes without problems.
So I think the case is worth its price and I can only recommend it.;amp;keywords=quiver+card+case&amp;amp;qid=1557417472&amp;amp;s=gateway&amp;amp;sprefix=quiver+car%2Caps%2C157&amp;amp;sr=8-1-spons&amp;amp;psc=1

u/PDespereaux · 1 pointr/mtgcube

I use a Quiver to store and transport my cube. It's just big enough to hold a double sleeved 360 cube with lands and tokens.

If you don't have your cube double sleeved or you carry lands and tokens in a separate case you can probably fit up to 540 in there!

u/jcjlee · 1 pointr/magicTCG

I use a Quiver case for mine. It's double your price range but I was really happy with it. Sleek exterior, interior built with sleeves in mind. Cards Against Humanity has blessed us with a larger market for people looking for large capacity card cases. I'd take a look at the comparable items to this case and see if anything piques your interest.

u/Pillowsword · 1 pointr/magicTCG

Portable Game Card Carrying Case, Stylish PU Leather Exterior with Double Zipper, Dividers, Wrist Strap &amp; Shoulder Strap | Holds up to 1350 Cards | Deck Box Compatible | Plus: 100 Transparent Sleeves

u/festerduley · 1 pointr/boardgames

I'm curious, too. My buddy has everything but 1 expansion sleeved and in 2 of the big boxes. That's including most of the 1 deck expansions.

Have you tried something like The Quiver? It only holds 1,450 cards, but at least it's very portable.

u/Melvit · 1 pointr/boardgames

I've seen this as a solution for card based games, but I don't think it will help you with the other ones:

u/_windfish_ · 1 pointr/magicTCG

It sounds like you would be interested in the card quiver.

u/SocorroTortoise · 1 pointr/EDH

I picked up one of these a little while ago. It's a little on the pricey side, but I wanted something nice and largely self contained. It comfortably fits about a hundred sleeved tokens, a double sleeved deck, three single sleeved decks, and a couple of the chessex dice boxes. Velcro dividers inside so it's fairly customizable. It's obviously not going to hold as much as a backpack, so probably not what you're after if you're carrying around a trade binder or lots of peripheral stuff, but I've liked it so far.

u/Popcynical · 1 pointr/EDH;amp;qid=1504986979&amp;amp;sr=1-1-catcorr&amp;amp;pi=AC_SX236_SY340_QL65&amp;amp;keywords=quiver+card+case
I highly recommend this case, it fits 7 sleeved edh decks snugly with Velcro dividers so you don't have to bother with boxes, however it only comes with 5 Velcro dividers so I need to use one of the hard plastic dividers to separate the sixth and seventh deck.

u/thethingexe · 0 pointsr/magicTCG

Where do you get your hyper mats from? They are cheaper for me, here in Australia.

Also, on Amazon, KMCs are still cheaper.

u/enmadaimo · 0 pointsr/funkopop

I have bought these for missing stands:

They have multiple pegs, but are at least an inch wider in diameter.

u/meatwhisper · 0 pointsr/magicTCG

Pick up a quivver... it's not that much more expensive: