Best usb gadgets according to redditors

We found 743 Reddit comments discussing the best usb gadgets. We ranked the 190 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Subcategories:

USB warmers
USB reading lamps

Top Reddit comments about USB Gadgets:

u/Trazac · 1304 pointsr/pcmasterrace

I spent way too much time on this, but let's see how your claim plays out.

2. Akai MPK249 $400
2. Yamaha P71 $415
3. 21.5 inch iMac $1100 (although this is the base model, probably a good estimate)
3. Edifier R1280T Near Field Monitors $99
5. Asus 24" monitor $130x5=$650
4. Logitech G27 I'm going to say around $300, even though Amazon has it listed for nearly $1000. Seems like the MSRP a few years ago was $300-$400.

  1. Logitech G Saitek X52 Flight Control System $150
  2. Logitech C600 $30
  3. Opolar F401 $12
  4. Logitech G610 $90, although some versions on amazon are closer to $60
  5. (I couldn't figure out what the other keyboard is, but it's probably junk that the OP didn't spend a lot of money on.)
  6. Logitech Z623 $100 (I think these are right)
  7. HTC Vive $500
  8. Logitech Z-2300 $180 MSRP, I'm fairly certain that I'm wrong about this one though
  9. Wireless Xbox Controller $42

    Add in like $1000 for each desk and $2000 for each computer we don't see (assuming there are two), that gets us to a total of $11,068.

    There is a laptop bag stashed on the left side of the frame, so maybe it's a $9000 laptop.
u/BKoster98 · 355 pointsr/raspberry_pi

Specs: Raspberry Pi Zero W running Raspbian. I have a generic case that I found at Microcenter that came with a heat sync. Samba is installed for windows file sharing. Pi VPN is also installed for access from anywhere. Two hard drive enclosures form amazon with a few hard drives I had lying around: 1TB (left) and a 320GB (right). The fan is an Arctic Breeze Mobile and I also have a USB to Ethernet adapter. Everything is connected to a 7 hub Anker powered USB hub. The fan is probably overkill but whatever, it looks cool.

​

Guides I followed to get it all up and running:

How To Geek: How to Turn a Raspberry Pi into a Low-Power Network Storage Device

Combining the two different hard drives to appear as one

Setting up OpenVPN with PiVPN

​

Edit: Added Amazon links - I didn't buy everything from amazon but this is easiest. Some things aren't the exact ones shown but close enough.

​

Edit Edit: Added links to the guides I followed

​

Edit\^3: Thank you all for the support and my first Gold! I didn't think this would get as much support as it has gotten! :)

​

Last Edit hopefully: I apologize I called it a "Cloud" Server. It has stirred up some debate on whether or not it is. I called it a "cloud" server because I can access it from anywhere.

u/CUBICALwARFARE · 49 pointsr/starcraft

I used two of these:
http://www.amazon.com/Antec-Accent-Lighting-Blue-USB-powered/dp/B007TG5ECW

I bought Quartz Fairy Crystal Clusters, which sometimes come with very opaque bases, so I bought a decent amount more than I needed to make sure I'd got enough good, clear ones.

Then, I just went to a craft shop and constructed a trough out of Balsa wood.

Edit: Forgot a word...

u/haroldp · 42 pointsr/geek

I have a Gryphon PowerMate. It's just one volume knob, but it's one big, heavy volume knob, the way gawd intended volume knobs should be. Also, if you press it like a button, it's set up to mute all sound. And it's very sturdy, so you can really whack it when an annoying youtube ad comes on, for example.

Also, it's very flexible. I cobbled together a little script so if I press-and-hold the button, it toggles output between speakers and headphones.

Highly recommended piece of gear.

u/koottravel · 38 pointsr/onebag

This usb fan. I've had so many uncomfortably hot nights, especially while staying in pod dorms without fans built in. This thing is light, well built, and provides a surprising amount of cooling breeze.

u/Tankbot85 · 25 pointsr/techsupportmacgyver

If there is a USB port on the switch, get this.

https://www.amazon.com/gp/product/B003XN24GY/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

These fans are amazing. 1 of them keep my network equipment cool. Works like a champ.

u/Auxilae · 23 pointsr/shittykickstarters

http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

Less than $25. This type of technology isn't rocket science.

u/ImNotPanicking · 17 pointsr/GooglePixel

Consider this: Your CPUs are rendering or displaying two 3d views at 60hz minimal, streaming at 4k or near 4k for 360 video, and doing all of this on a battery and no fans.

Realistically this is going to equate to heat. Mobile VR isn't for long experiences yet. Try to appreciate it for what it is and will become. If you want a long VR experience without PC or console VR, you'll need to figure out a cooling system.

GearVR users have done everything from ice packs to heatsinks to 3d printed fan attachments. The Galaxy S7 has heat spreaders, but check /r/GearVR and you'll find there is still an overheating issue in particular situations.

Give it time and we'll start seeing the same ingenuity in this community that GearVR has.

Edit: A cooler like this may help, but I think you'll need to enable the Daydream developer options to run with the NFC chip being so far away. Don't know if it would still fit in the viewer like that though. Hopefully a 3rd party Daydream headset will come along with cooling. Whenever my Verizon rebate comes through I might tear my headset down and see about adding a fan onto the NFC back plate.

u/prajaybasu · 16 pointsr/yubikey

> Google Titan

They suck:


  • The Titan hardware is the same as Feitian MultiPass K13 and Feitian ePass NFC bundle

  • The rebranded MultiPass that they're selling sucks, it uses Micro USB which is a weak and outdated connector.

  • The keys are made in China by a Chinese company. If you care about this, then you're better off with Yubico or some open source vendor. I don't have a problem with Feitian though, they've been in this business for a long time.

  • The MultiPass key isn't waterproof and can be popped open. The non BLE versions are sealed using epoxy and really impossible to break, just like a YubiKey. I wouldn't trust a MultiPass key as a backup. See the Amazon reviews for yourself.

  • There's lots of issues with BLE, OSes even had to block pairing with insecure security keys that Google/Feitian was forced to recall.

  • It's another damn device that requires charging.

  • Can only be used for Google Accounts on iOS with the Smart Lock app installed. While YubiKey has made active efforts to support the 5Ci on iOS.

    For $50-$70, I'd probably get one of these options as a backup:

  • 50-70$ -1 x YubiKey 5 series, preferably the 5Ci or another 5 NFC.
  • 60$ - 5 x Feitian HyperFIDO Mini, to hide them in bank lockers/backpacks
  • 60$ - 3 x Yubico Security Key, because they support FIDO2 for Azure AD/Microsoft Acccounts
  • 60$ - 1 x Feitian BioPass, since biometrics is more secure than typing a PIN on a software keypad. Wouldn't trust it in an airport though, legally a grey area.


    I also tried GoTrustID (paid) and Krypton which are app based U2F authenticators with push notifications for verification. They act as a decent wireless software backup that works for all accounts. GoTrustID is BLE based while Krypton uses push notifications.

    Google currently doesn't allow using an Android phone as a BLE security key except for Google accounts (uses a proprietary protocol called CaBLE that only works on Chrome Desktop right now).

    I've personally found USB-C to be the most robust method on Android phones and newer laptops, it's really quick and easy. Windows 10 doesn't even show me an option to pair a Bluetooth U2F authenticator on 1903, only Chromium browser has implemented it, not the OS itself. With the YubiKey 5Ci, it should be easy to authenticate on literally any device from the last 10 years with minimal dongles, so it will be my first choice as a backup. USB-C is better than NFC for me.
u/bowser_mouth · 15 pointsr/DIY

It has a retractable USB cord. Amazon.com

u/beericane · 12 pointsr/Homebrewing

Spend the extra $10 and get this instead: http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK

Gives you speed control and USB power all in one. Just grab a spare usb to wall power adapter from your "old phones" drawer at home and you are a few magnets and a box away from having your stir plate completed.

I use this one and it could not have been easier.

u/luxpsycho · 10 pointsr/geek

FYI, for amazon links, substitute "www" with "smile" to have a portion of your shoppig go to charity at no extra cost:

https://smile.amazon.com/dp/B010M9KRHO/

u/afsanulr · 9 pointsr/Hyperhidrosis

ARCTIC Breeze Mobile - Mini USB Desktop Fan with Flexible Neck I Portable Desk Fan for Home, Office I Silent USB Fan I Fan Speed 1700 RPM - White https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_api_i_vkB0CbKWGXCVB

u/esoogkcudkcud · 8 pointsr/buildapc

I just got a Thermaltake desk fan off of Amazon. I feel like it's a PCMasterrace badge of pride to have a case fan sitting on my work desk.

https://www.amazon.com/dp/B00080G0BK/ref=twister_B00VX30760

u/onsit · 8 pointsr/subaru

I originally did this install back in the day when these were first popping up and down, major credit goes to /u/zedix as I'm pretty sure he was the first one on Nasioc to start this whole trend for Subarus.

My first installation used a head unit that was tucked away behind everything. However the weak pre-amp, and the constant loss of settings (disconnecting battery), and lack on Steering Wheel controls really got annoying. So I set out on this Version 2 project.

*96svx.dc - David was an amazing resource with getting the required harnesses for an 08+, as my car came with a 24pin + 12pin adapter (premium nav) it was very hard to find 2 reverse harnesses that would make this install doable.**

  • 2012 Nexus 7 - 1st gen
  • Timur's USB ROM - in FI mode
  • Typical Apps...

  • Joycon CPJexr(CarPc Joycon Exr), converts steering wheel input into Keyboard strokes recognizable by the tablet. LINK
  • Rockford Fosgate PBR300X4 - 300watt amp with Molex input/output LINK
  • USB Dual 80mm Fans with protective grill - LINK
  • 3.5mm inline to RCA (dual channel) - LINK
  • FiiO E10 USB DAC LINK
  • Amazon USB hubs, cheap and easy to hack into - LINK
  • Monoprice USB Extension Cables - LINK
  • SanDisk Cruzer Fit 32GB - Stores Music - LINK
  • Monoprice Micro USB OTG Adapter - LINK
  • USB Y-Power adapter
  • JDM 2-tone AV panel
  • 12v to 5v DC/DC converters (You will need a couple of these, as they are from China they might be DoA)
  • Other various adapters, and 14 ga wire for all of this to work..

    I created a double din sized Acrylic box from 1/4" sheets cut to size by a local shop... Here are the outer dimensions if you are interested in making a similar box to hold all of this.

  • [OD] - 4" x 7" x 5.75"
  • [x 1] - 4" x 7"
  • [x 2] - 6.5" x 5.5"
  • [x 2] - 4" x 5.5"

    Hardest part out of the whole install was coming up with the wiring scheme, as all of this is fed off of 12v ignition. The tablet needed to be able to charge, and the USB hub needed to receive power separate from the OTG y-splitter. I simply spliced into the cheap-o USB hubs and made my own DIY 5v USB hubs.




u/DNedry · 7 pointsr/Homebrewing

You need a stirplate!

I made one very cheaply from these things:

http://www.amazon.com/gp/product/B00080G0BK/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1

http://www.amazon.com/gp/product/B001KUWM3C/ref=oh_details_o04_s00_i01?ie=UTF8&psc=1

Edit: And 1 washer, as long as it fits on the inside of the fan.

Edit: Here is a video

u/bowman088 · 7 pointsr/Homebrewing

Too expensive? All you need is a computer fan, a pair of magnets, and some glue. I used this fan (https://www.amazon.com/gp/product/B00080G0BK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1). I just removed the metal guard from the back side and glued the magnet to it. The ends of the screws hold the flask the right height above the fan for everything to work perfectly. It's not the prettiest stir plate but it works just as well.

u/seamus333 · 7 pointsr/Charcuterie

Temp Controller
https://www.amazon.com/dp/B011296704/ref=cm_sw_r_cp_api_dYnVAb99AN5JX

Humidity Controller
https://www.amazon.com/dp/B01FQKXRXA/ref=cm_sw_r_cp_api_3YnVAbW8V1DHG

DeHumidifier
https://www.amazon.com/dp/B000H0ZDD2/ref=cm_sw_r_cp_api_SZnVAbTSHMSQT

Humidifier
https://www.amazon.com/dp/B01D0POS7W/ref=cm_sw_r_cp_api_m0nVAbD00AGKP

Small Fan (on a timer, runs for 30 minutes every 2 hours or so)
https://www.amazon.com/dp/B00WM7TRTY/ref=cm_sw_r_cp_api_V0nVAb8XD3K7Q

Heater
https://www.amazon.com/dp/B00P7U259C/ref=cm_sw_r_cp_api_E1nVAbC6R49Z3

I got an old fridge on Craigslist for $25 that I thought was a small personal fridge but turned out to be about 6 cubic feet (perfect for hanging). I’m not sure of the brand actually (maybe Kenmore). So far I’ve done a Bresaola and a Copa, both have turned out great!

u/DiggingforPoon · 6 pointsr/INEEEEDIT

200 dollars for some shitty keyboard that has one of these already built-in? Not mechanical, not even Topre, but membrane chiclet keys...

Ughh, no thank you.

u/_Skylake_ · 6 pointsr/buildapc

this is what you're looking for


or another idea,

Buy this modify/dremel it so you can somehow flushmount it into your desk.

You'd have to make it removable to replace battery every few months, or you could find out what voltage the battery is and hardwire from a molex connector from your PSU, cutting down the voltage using resistors to get the correct voltage to the controller to eliminate the need of a battery.

u/[deleted] · 6 pointsr/Monitors

Amazon US and Amazon Canada.

Edit: this is far better quality, though. It is made from a computer case fan and will likely last you longer. Amazon US or Amazon Canada

u/davidrools · 6 pointsr/Bitcoin

LMAmazonTFY

Top result for "usb fan" in Amazon electronics

u/jacle2210 · 6 pointsr/techsupportmacgyver
u/FirstLastBirth · 6 pointsr/vandwellers

I actually high recommend this guy:

https://www.amazon.com/dp/B07L4GLJZD/ref=cm_sw_r_cp_api_i_j3UvDbG22FBPM

It’s wireless, and can blow on high for 10 hours. I can feel a good amount of air flow even when it’s 8ft away from me.

u/pinktarts · 5 pointsr/VRchat

So if you get the adapter,

  1. you’ll need another battery, I bought 2 extra but that because I’m crazy

    An ankler 10,000 watt is the same size and weight as the included battery but lasts about 3-4 hours (around twice as long as the htc once) an Ankler 20,000 is more expensive and double the weight but lasts between 7-8 hours on a single charge (actually I’ve never run out of battery life while using that one) you can also hotswap them if one runs out of battery life as long as you do it quickly


  2. you need a USB 40mm fan, w/o this the adapter is gonna overheat and run at 90c constantly.. with the fan set on low it stays around 40-50c for me which should limit disconnects.

    I’m using this one

    https://www.amazon.com/ELUTENG-Ventilator-Compatible-Receiver-Playstation/dp/B071JB9WYB/ref=mp_s_a_1_4?keywords=40+mm+usb+fan&qid=1568919841&sr=8-4

    Just plug it into the spare usb slot on the vive and have the fans facing down. You can attach it anyway you want but I used Velcro tape

  3. run the wireless vive software as administrator and in preferences disable full screen optimizations.



    One of the cavets of wireless is occasional disconnects or gray/black screens.. but it’s not enough to make me want to go back teathered... and doing the steps above should limit when it happens by a significant amount.. you also usually fix most problems by just reseating the battery or unplugging and plugging in the usb cord.. but sometimes you might need to restart SteamVR or the wireless tech.

    It’s not perfect.. but when it works, IT WORKS and it’s freaking amazing and the same as wired


    Oh yeah make sure your chaperone/playspace is set slightly smaller then you normally keep it, also keep it at beginner settings. You’re not going to know where you are in your placespace until you get used to cordless
u/Doll8313 · 5 pointsr/xboxone

/u/JustOutrageousX , buy one of these and then plug it into the back of your Xbox One. Set it off to the side of your Xbox so it pushes hot air out the front. If that is the only place you can put your console then I would highly suggest doing this or finding a method to get heat out that small area.

u/Piffles · 5 pointsr/Homebrewing

I'll give you my amazon build. It's $10 less than a comparable one from StirStarters, and only requires you to have a wall-outlet to USB adapter (Or for you to plug it into a computer when running.)

Box

Fan

Magnets

Stir Bar

The fan has a speed controller, you just need an adhesive to secure the magnets to the fan, and some way to shim the fan up in the box so the magnets are closer to the top of the stir plate. I just used cardboard.

If you have a powerful enough magnet, that cuts off about $5 in costs. Or if you can create your own enclosure you may be able to save.

u/DebitsOnTheLeft · 5 pointsr/xboxone

I got these about two years ago and screwed them into the back of my TV stand. They work great.

u/Ineedmorcowbell · 5 pointsr/gaming

This is just terrible. This is a solution to a poor design problem that should have been taken care of immediately after a mock up was made. Like many have mentioned, your hub is technically covering up the disc drive slot. Those ports are USB 3, something I am exstatic about that was added for these consoles, so the the power shouldn't be a problem for the hub unless plugging in 4 controllers....You know what this is all dumb. DUMB! If you plug in something to the usb it will most likely stay there forever. Your cable to charge the controller will be dangling there till you need it again. Plus I am certain Sony would make the plug slim enough to fit in their own designed space, and will be happy to sell you PS4 branded USB drives. What would one even need a USB flash drive for besides possibly taking your save games with you? The hard drive is upgradable to anything really right? Two terabyte hard drive inside, so just plug a Mood Light or fan in for no other reason then because you could.
TL:DR: You don't need this, it comes with enough usb plugs for whatever you might need. One for controller charging because everyone plays alone, and one for a God damn Mood Light because, FUCK YOU, that's why.

u/frbap · 5 pointsr/Surface
u/cmiller1 · 5 pointsr/Damnthatsinteresting

This is a USB powered "fan clock", a google search for usb fan clock should give you lots of results, for example: https://www.amazon.com/Vodcart-USB-LED-Fan-Clock/dp/B00DHEK0ME

Not sure what brand/model is in the gif, so you may want to research on if that's a decent one to buy if you really want one.

u/_tranceState_ · 5 pointsr/electricdaisycarnival

Haha you would think right! I had only 2 fans last year. It was June and it was hot as balls... for everyone else! I was a solid 30 degrees cooler in my own hoodie than anyone else around me. I kept them on at full blast at 1300 rpms(both fans were daisy chained) powered of a 2200 mAh battery pack also I had a small water reservoir in my camelbak that i can pump from my pocket to mist my back.

I had to leave the battery charging till the last minute though to make sure i had enough charge to last from dusk to dawn. This year I'm bringing two and rotating them out every other day.

u/paidhima · 4 pointsr/homelab

Unless it's a very warm environment, I don't think so. I had mine in an unconditioned room during a NY summer. It gets quite toasty, but I haven't had any problems. That being said, I didn't like the temp and purchased a USB-powered single 80mm fan (thermaltake I think). It's a neat little thing and even on low (completely silent until you're within a foot of the fan) it cooled the device until it was barely warm to the touch.

EDIT: this is what I use

u/FrancisPants · 4 pointsr/reptiles

It is an adjustable near silent fan that doesn't buffet. My cresties terrs smell like old bananas and jungle sometimes. I decided to do something about it. I keep their stuff very clean and these fans clean up the air for us. Here's the link on amazon if you buy 2 you can get super saver shipping....

http://www.amazon.com/gp/aw/d/B00080G0BK/ref=mp_s_a_1_1?qid=1377299237&sr=8-1&pi=AC_SX110_SY165

u/Something_Berserker · 4 pointsr/pcmasterrace

How about a simple wire stand powered by USB? https://www.amazon.com/gp/product/B002OJN250/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

My Boss has this setup at his desk and I thought it looked cool, effective and geeky so obviously I had to get one for my battle station setup.

u/Tollboy · 4 pointsr/photography

I have always wanted to have something like this. I have not looked into it much honestly, but I was curious if you could not use some sort of usb jog wheel like this, and assign hot keys to the different lightroom options. That way you hold down the hot key for temperature, and then turn the wheel as desired. Do you think something like that would be possible?

u/leadwateocean · 4 pointsr/functionalprint

On Amazon. Its a little pricier than I could have accomplished given more time, but for plug and play it'll do!

u/kojin · 4 pointsr/Surface

So one of these is a possible, and slightly ridiculous, stop-gap?

u/SurfaceDockGuy · 4 pointsr/Surface

Hi,

We always encourage customers to try getting the most out of their machines before buying new stuff. However there comes a point when attempting to restore old equipment can lead to major frustration. The following steps can help and certainly worth a shot:

  • To free SSD space try this: https://www.reddit.com/r/Surface/comments/5h0zpe/save_up_to_9gb_on_ssd_clean_up_cwindowsinstaller/
  • To improve performance, you can try downloading the latest Intel GPU driver from intel.com rather than using the Microsoft provided one. IIRC, the intel.com HD 4400 driver had about 9 months of extra development on it. You may need to manually uninstall your current driver via device manager in order to install the Intel one since it will complain that it is not designed for your computer. There is a risk of unintended side-effects, but it is 100% reversible.
  • Does the CPU fan spin often? If so, it could be clogged with dust reducing its effectiveness. You can try getting a can of compressed air and blowing it into the slats - don't worry, you're not going to ruin the fan by over-spinning it or moving dust around the machine with this technique. It is unlikely to have a major effect but worth a shot.
  • If the system is getting rather hot and throttling the CPU, you can add an auxiliary USB-powered fan and point it towards the hot area. Its surprising how effective this is: https://www.amazon.com/ARCTIC-Breeze-Mobile-Flexible-Portable/dp/B003XN24GY

    Cheers,

    Dan

    -----
    P.S. The newer Surface Pro 2017 or Pro 6 with Core i5/8GB ram would be an excellent upgrade for you if you choose to go in that direction.

u/TimeTravellerSmith · 4 pointsr/buildapc

There are a few options for easy lighting:

  • LED fans (example)
  • LED strips (example)
  • NZXT HUE (if it ever comes back in stock)

    Those are all pretty straightforward. Fans just install where you've got fans, strips either go on the monitor, keyboard, or outside/inside the edges of the case. Hue is similar to the strips but is powered internally.

    You can get a little more complex with things like Cold Cathode tubes.
u/The_Big_Burrito · 4 pointsr/battlestations

Have not done it yet myself have been looking into it. Saw it on a friend's system and our looked great Amazon

u/Chiba211 · 4 pointsr/RetroPie

I keep thinking about setting mine on top of one of these.

AC Infinity MULTIFAN S7, Quiet Dual 120mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling https://www.amazon.com/dp/B00JLV4BWC/ref=cm_sw_r_cp_apa_w5wTBbZE3R3VR

u/BannedNotBanned · 4 pointsr/PS4

Get some USB fans like these to put back there to get some of that heat out of there.

u/travistravels247 · 4 pointsr/onebag

Ok, so here's the items I often pack, and they have served me well so far:

[Redcross Flashlight] (https://www.amazon.com/dp/B003BYROUQ/ref=cm_sw_r_other_apa_2SSlxbRHB73T6) that handcranks to charge itself and small devices. Because of this, it's my top suggestion. I've used it to recharge my Kobo ereader, [my headset] (https://www.amazon.com/dp/B00LAF23VI/ref=cm_sw_r_cp_apa_g3Qpxb5M3BKJP) (which I've been very happy with, and will order again if/when it breaks), and a small Bluetooth speaker for playing music in my room. I tried to charge my smartphone with the flashlight crank, but it's not advisable, it will take forever.

Other lighting includes [a headlamp] (https://www.amazon.com/dp/B015R1I6AM/ref=cm_sw_r_other_apa_b2Slxb0QVR92C) and when fighting the heat, I found this fan. For those into vaping, I suggest looking at Vapium Summit, I gave that as a gift, and it's nice for the price.

I tried to find a real sturdy USB hub, but just went with a cheap one with decent reviews.

And finally my portable powerhouse for when there's no outlets nearby: Orange Joos and i will agree that any solar panel will do, but this has a built in battery that holds a charge. It's not flimsy, but also not ultralight. I'm happy with it.

u/pineapplite · 4 pointsr/Stadia

I noticed mine was warm while my TV was off when I went to check it.

Testing now but I don't have anything to reliably measure temps.

I might use my USB fan on it if I notice it getting hot. I have one of these that's pretty quiet and portable:
https://www.amazon.com/efluky-Rechargeable-Operated-Portable-4-9-Inch/dp/B00Y1VZ00E/ref=cm_cr_arp_d_product_top?ie=UTF8&th=1

u/upsidedownbackwards · 4 pointsr/urbancarliving

I have two of these. The internal batteries suck so I removed them and just use a USB power pack.

https://www.amazon.com/gp/product/B00Y1VZ00E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

u/shiner_bock · 4 pointsr/geek

FYI, for amazon links, you only need the following:

https://www.amazon.com/dp/B010M9KRHO/

The "OnetwoUSB-Display-Function-Silver-warranty" part can be useful for you to keep track of what each link is to, but the rest of the stuff is tracking and other meta information that's mainly useful only for amazon's data crunching purposes. There can be other info in there, too, like if someone refers you to a product, they can get a referral credit (if they're set up for it), which you may or may not want to support.

u/thelovelamp · 4 pointsr/vandwellers

I think ventilation and insulation are really the only things you can do, esp. in a car. A Prius can do AC as generator-style, but there's no way to get enough solar to do AC in a car. Make sure you are blocking out the heat from the windows using reflectix, that part is mandatory. I believe there is good heat-blocking tint as well, but I think it's expesnive.

I just recently got this 9 inch usb fan by OPOLAR and it pushes a lot of air for it's size! Only uses 1 watt on low and like 4 watts on high, 5v because it's usb. I've ordered a second one =D

u/lrryr · 4 pointsr/vandwellers

I just spent time in southern florida in the back of my pickup with a truck cap. Temps only dropped to the mid 80's at night.
This little fan did fine by me, but most important its nearly silent on the low setting. In the house you'd think it wasnt pushing nearly enough air but in our confined spaces it was plenty. I've ordered two more to add for the summer coming up.

https://www.amazon.com/OPOLAR-Powered-Battery-Enhanced-Personal/dp/B06WGLGJ94/ref=sr_1_3?keywords=OPOLAR+9+inch+USB+Desk+Fan&qid=1556055680&s=home-garden&sr=1-3

u/oldlinuxguy · 3 pointsr/selfhosted

A little air flow couldn't hurt. I would put one hole on each side of the cabinet for intake and exhaust. On the intake, place a mesh or filter to minimize dust etc. On the exhaust side, I would just use something like this: https://www.amazon.ca/Thermaltake-A1888-External-Usb-Fan/dp/B00080G0BK Inexpensive and relatively low power draw.

u/TastesLikeBurning · 3 pointsr/hardware

Here's how I cool my modem/router. Many routers have at least one powered USB port on them these days.

I bought one of these USB cooling fans to cool an old laptop I had. I think I paid about ten bucks at Frys for it. Used some nuts to put some space between the box/router/modem to give it some airflow and plugged the fan into the routers USB port. Stays nice and cool. I thought I might need to drill some holes on boths sides of the router to get effective airflow over the chipset, but that hasn't been necessary. The small vents on the sides and bottom of the router have been enough.

I'm with most of the other commenters here in wondering why most networking equipment doesn't include even the smallest of fans from the factory to help improve the performance of the device under load and increase its longevity.

u/Mephiska · 3 pointsr/htpc

You could also get a couple of these guys and plug them into the HTPC so they only run when the system is on, or get a powered USB hub for them to run all the time.

u/Agingcarnivore · 3 pointsr/Homebrewing

I used this computer fan,

Thermaltake Mobile Fan II External USB Cooling Fan - Us https://www.amazon.com/dp/B00080G0BK/ref=cm_sw_r_cp_apa_2aVizb53FQE8Z

And this box, the lid is a little flimsy so I left the fan's mounting screws long enough to support the weight of a full 5 liter flask.

Darice 9180-06 Unfinished Cigar Box, 8.375"x8.125"x1.75" https://www.amazon.com/dp/B001767QPS/ref=cm_sw_r_cp_apa_TcVizbZFZ06D7

And this is what I ended up with...

https://imgur.com/gallery/TtMEI

Edit: if you're in the U.S. and would like I could send you the magnets I used and a stir bar. The magnets I used came in a 10 pack.

u/lordfili · 3 pointsr/Homebrewing

How are you looking to power it - wall wort or USB?

If you want to avoid any hassle you can skip wiring it entirely and use one of these:
Thermaltake Mobile Fan II External USB Cooling Fan - Us https://www.amazon.com/dp/B00080G0BK/ref=cm_sw_r_cp_api_8v8rzb0S032GD

That's what mine uses, and it works perfectly!

u/ExtremeHobo · 3 pointsr/hometheater

For people with less professional or cheaper setups, I use this one as an alternative. You can cut a hole in the back of your TV stand and plug it into the USB port on your receiver.

Thermaltake Mobile Fan II Adjustable Speed External USB Cooling Fan with One-touch Retractable USB power cable box for Notebook Laptop Desktop. A1888 https://www.amazon.com/dp/B00080G0BK/ref=cm_sw_r_cp_apa_i_y4LKDbH6CXSZR

u/MSUBREW · 3 pointsr/Homebrewing

Here is a photo of mine.

I used:

  • 12v pc fan
  • 2 rare earth magnets
  • 6v power supply with ends stripped
  • wood box from hobby lobby
  • 1 large washer
  • 1 stir bar (smallest at LHBS so I think 3/4")
  • 1 large (1.5L) wine bottle

    I used "mighty mend it" to glue the large washer to the pc fan center, and glued the magnets on the washer with different poles facing up. I spliced the power wires and attached them to the wiring of the pc fan. I used screws to attach the pc fan to the wood box.

    If you are looking for a simple, cheap way to do it, buy this fan on Amazon for like $11 and use a usb charger from an old cell.
u/wavemaster61 · 3 pointsr/hometheater

get you one of these! and plug it in to the usb port on the back of your marantz! you could cut holes in your stand or just put it back there out of sight to move some air.

u/Fenix159 · 3 pointsr/Homebrewing

Already posted this, but it's part of this fan.

I'm not OP, but I also used that fan for it. Awesome thing.

u/calligraphy_dick · 3 pointsr/Homebrewing

For personal reasons, I am leaving the hobby. It was fun while it lasted but now my lackluster hardly-used equipment needs to go. This community is so positive and helpful for the up-and-coming homebrewer so I'll feed into it. If you want any of the equipment below all I ask is for you to pay for shipping (or pick-up if local), and if you want to shoot me a few more bucks feel free. Just put it to good use and don't let it collect dust like I did. Most of this stuff is probably not even worth the shipping but here's the list:

  • 3G glass carboy
  • 16oz Star-San
  • 2x 1G glass carboys
  • 2x airlocks and bungs
  • hydrometer
  • refractometer (Brix/SG)
  • 5G plastic bottling bucket (no lid) (Northern Brewer)
  • Parts for a MLT cooler conversion (minus bazooka filter)
  • Crowns (silver metallic/black 'B')
  • 5L Erlenmeyer flask and .5" stir bar
  • This fan
  • Cheap (but effective) vinator
  • Buttloads of unlabeled brown bottles (12oz, bombers, some with branded glass)
  • ~1# Irish Moss (not sure about viability, ~1y/o)
u/zoahporre · 3 pointsr/PS4

I use these

You can turn the speed up and down as needed or as noise allows. They are very durable, I still have one of my old ones I bought for my ps3 back in 2011.

u/mikemiller-esq · 3 pointsr/Dell
  1. get fed up of the constant restarts.
  2. we bought a dual usb 80mm fan set from here https://www.amazon.co.uk/Coolerguys-Dual-80mm-USB-Grills-Black/dp/B002NVC1DS/ref=sr_1_2?s=electronics&ie=UTF8&qid=1517934886&sr=1-2&keywords=80+mm+dual+usb+fan
  3. opened up the dock, remove the rubber mat at the bottom,it's only glued, removed the metal heat sink
  4. used a whole saw to cut the main hole and mounted the fan
  5. drilled smaller holes to make it go faster
  6. plugged in the usb cable to the front jacks.

    :)
u/2ZQQ · 3 pointsr/MechanicalKeyboards

Can't you buy one now separately?

This was the first response for "usb volume knob" to make sure I wasn't imagining things...

https://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

u/ZenWhisper · 3 pointsr/TagPro

Upvote for the PowerMate button which I now use for my mic button. You seem to be well on the path to specialized input device mastery.

u/armada127 · 3 pointsr/MechanicalKeyboards

Here's an amazon link for anyone interested: http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

Still in stock.

u/threeio · 3 pointsr/RTLSDR

I've used griffin tech power mate controllers with my sdr setup

Simple remap of the keyboard, spin nob for vfo, push down and turn for volume and click for mute in my case

https://www.amazon.com/gp/aw/d/B003VWU2WA/ref=mp_s_a_1_1?qid=1458704856&sr=8-1&pi=SY200_QL40&keywords=griffin+powermate&dpPl=1&dpID=41ip5QhZChL&ref=plSrch

u/theorhettical · 3 pointsr/EDC

You have a power bank, why not just get a small usb fan. There are hundreds of models on amazon that are small and either run off any usb port or are rechargeable.

Like this: usb flexible fan

Or even this fancy neck one: fancy neck fan

u/madrascafe · 3 pointsr/PFSENSE

in case you are looking for a fan, try this https://www.amazon.com/dp/B003XN24GY/ref=cm_cd_asin_lnk ;-)

u/estydees · 3 pointsr/Surface

Hello,

I have a surface S3 with I7 for over a year now and I love it. Most of your bugs I've experienced at some point or other. Windows 10 originally had a pretty rough start on minor bugs but Microsoft has started releasing patches at a faster rate which helped a lot of these.

  1. Keep updating windows.. This use to be a common problem for more then just surface, (my gf has a lenovo laptop with touch and it would break there too) but it went away sometime ago. (Use to be a weekly problem but I haven't experienced it in a few months)

  2. I had to disable windows defender for similar issues. Not sure if updating or what helped but ya the overheating is a real issue. I bought a usb small fan on amazon for about $7 to plug into my computer to blow air on the top right corner of the computer. This helps a lot with overheating, (especially when gaming). For the process being stuck, it sounds like a bug =/. I use to see this issue but it went away. For me it was this "app module installer". Very annoying but I haven't had an issue like this in months.

    https://www.amazon.com/ARCTIC-USB-Powered-Portable-Solution-Gooseneck/dp/B003XN24GY

  3. Sorry, haven't hit this.

  4. Try letting update run for a long period of time. I had the same problem and learned that the % isn't accurate. If you don't have the windows anniversary version it might be downloading a very large update and could be stuck there for a long time.

    I donno if I was very helpful but try to plug into a solid internet and download all the updates, the Surface has come a long way in terms of reliability. Microsoft redesigned a lot of code with windows 8+ and it came at a cost.
u/Melbuf · 3 pointsr/pihole

if thats too noisy these things work fine and are pretty close to silent

https://smile.amazon.com/gp/product/B003XN24GY

i have one running on mine

additionally you can put one of these on the CPU

https://smile.amazon.com/gp/product/B00ZC043CE

u/FuzzyRocket · 3 pointsr/cosplay

No problem glad to talk about it, and answer any questions.

This costume has a lot of room in the inside so I went with this larger USB fan and a small USB cord to connect it to a USB power pack that runs on 4 AA batteries. I wanted to keep the power supply separate from the video, incase issues arise with one or the other.

Edit: Guess I should add that the fans are always on once plugged in, this is done as part of getting suited up. Thought about a switch, but because this suit will always need a handler, we always had spare batteries.

The camera/LCD are on a switch that draw power from 8xAAs. The eyes use red LEDs with a single white led in the center, they also draw power from the same 8 battery pack but have a separate switch. This worked out well during rest periods and we were suiting back up. I could just tell the crowd to please hold on pictures till Al's soul is back in the armor (eyes light up)

u/TheManThatWasnt · 3 pointsr/NintendoSwitch

I bought this fan when I bought my switch. I plug it in every time I play Mario kart or Zelda. After a couple hours of four player MK8 it was still pretty cool to the touch. Peace of mind for me. Maybe it's bullshit but I'm happy to have it.

https://www.amazon.com/gp/aw/d/B003XN24GY/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

u/ePHDiSK · 3 pointsr/BitcoinMining

This is my previous step.

http://www.reddit.com/r/BitcoinMining/comments/1izsj8/133ghs_4x_usb_erupters_now_i_can_use_my_gaming/

Flexible USB Fan - http://www.amazon.com/gp/product/B003XN24GY

USB L Connector - http://www.amazon.com/gp/product/B00B5HS95A

7 Port Powered Rosewill USB Hub - http://www.amazon.com/gp/product/B004BV7XQ8


The fan is quiet and does its job. 5 successful eruptors on one usb 2.0 hub.

u/DZCreeper · 3 pointsr/hometheater

I prefer Noctua fans, they are known for high quality PC fans, but they make 5V models with USB adaptors.

https://www.amazon.com/Noctua-NF-A12x25-5V-PWM-Premium/dp/B07DXQTCK6/

https://www.amazon.com/Noctua-NF-A20-5V-PWM-Premium-Quality/dp/B07F49P8S2

AC Infinity fans are significantly cheaper, but the lifespan is much lower.

https://www.amazon.com/AC-Infinity-MULTIFAN-Receiver-Playstation/dp/B00JLV4BWC

u/sneakycoffey · 3 pointsr/hometheater

I used these AC Infinity MULTIFAN S7, Quiet Dual 120mm USB Fan for Receiver DVR Playstation Xbox Computer Cabinet Cooling https://www.amazon.com/dp/B00JLV4BWC/ref=cm_sw_r_cp_api_zu.3xbJ0C6VHP

u/Zyybolt · 3 pointsr/hometheater

I had the same issue with an x4000. Put a couple of these on top of the receiver (if they will fit).

u/TheSentencer · 3 pointsr/hometheater

Similar to what /u/omnibot5000 said, but I just use one of these much cheaper AC infinity fans. Where my AVR is isn't even open in the back, but this fan does the job quite easily on the lowest speed setting. I just have it laying on top of the AVR and powered off usb and the way mine looks you can't even see the fan or hear it.

The only downside is that with my denon, if you have network always on (so spotify remote works right), it also powers the USB ports all the time. So even when my AVR is off, the fan is running. But it's been like 2 years and it hasn't died so I guess it works good.

u/Changoleo · 3 pointsr/PS4Pro

I'd be especially wary of any add-on fans that pull power from the system. Plugging a third party fan into the usb outlet of your system will make the system work harder and most likely do more harm than good. If you're concerned about your system heating up, don't put it in a place in which the heat will be trapped such as an enclosed cabinet or entertainment center.

I used one of the Nyko Intercoolers on my PS3 Slim for a while. It didn't pull power from the console and it was designed so well that it looked like it was part of the console, but in the end, the same thing happened to it that most of the reviews of all of the third party cooling systems mention. The fans got really loud after a couple of months. Great design. Low quality components. I just ended up buying a mini desktop fan and aiming the airflow across the back of my console. Works great.

I'm considering picking up this laptop fan to provide some extra cooling for my system during the summer months, but I'll definitely be picking up an extended usb cable so that I can power it from a power strip. Good luck OP!

u/collierar · 3 pointsr/onebag

I really like this fan.

Efluky Mini USB 3 Speeds Rechargeable Portable Table Fan, 4.5-Inch, Black https://www.amazon.com/dp/B00Y1VZ00E/ref=cm_sw_r_cp_apa_OmCeAbAN6TPPZ

The thing is you kind of have to make the jump to 18650 rechargeable batteries. I am a flashlight junkie so that helped when I decided to buy this fan. The battery that came with it is "OK" but there are better one out there. R/flashlights has a ton of info on 18650 batteries. 18650 batteries can also be used as power banks for charging your phone. I use the charger that came with this headlamp as a travel charger/power bank. I'm sure you can find it by itself. Make sure to buy quality batteries though.

Nitecore HC60 1000 Lumen USB Rechargeable LED Headlamp with 2x Nitecore 3400 mAh 18650 batteries, Nitecore USB Charger and LumenTac Car AC USB Adapters (White Light) https://www.amazon.com/dp/B01JH6SY64/ref=cm_sw_r_cp_apa_ttCeAbG66RQR7

Good luck!

u/addocd · 3 pointsr/Hyperhidrosis

I've said this here several times because it is the one thing that has been the most helpful of anything to me. It only solves one problem, but it's a big one for me and will be for you. Get a small desk fan like This. It's a few bucks more but I have this one. It's rechargeable via USB. I keep it plugged in at my main desk most of the time. I have 2 setups at 90 degrees on my desk and I just turn it to blow on whichever one I'm using. Then, since it's battery operated, I can unplug it and point it at my hands or paper or project, whatever I'm doing anywhere else. I've even set it up to point at my hands when I'm using my phone. I work from home most of the time, but when I have to go to the office, its small enough to throw in my laptop bag and the battery will last the whole day on low (which is usually enough to keep me completely dry. My hands do get cold often, but it's worth it and it tends to cool my whole body. I'm grateful to work from home because most days I have to have (1) the ceiling fan on (2) socks on (3) my desk fan (4) a space heater (5) a hoodie and (6) a blanket...which has to be cotton because we all know what happens with a fuzzy blanket.

If you don't already, get some clinical strength deodorant. It's worth every extra penny to me.

As for the other options, you'll probably just have to try them one by one, trial & error starting at the easiest, least costly and least invasive. You can order glyco online (oral and wipes) and iontophoresis without a doctor. If one of those doesn't do it, see a doctor. If that doctor tries to tell you it's not a big deal, something you'll grow out of, or just doesn't seem to get it (it's pretty common), find another doctor. sweathelp.org Has a lot of resources and suggestions and explains all of the treatments. So far, the only thing that has worked for me is Botox. But it is expensive if you don't have insurance that will cover it. You may have to fill out some forms to ask them to. Botox also has some mild side effects that cause some temporary weakness in your hands. Depending on your job, that's something important to consider. It's also painful, but for me, only during injections.

If you browse around this sub, there is some good info on special tshirts and socks that people tend to find are helpful, especially for that underarm sweat. Wear black when you can, most of us do. If you're going somewhere you know you'll have to shake hands, put a papertowel in each pocket. If appropriate, it's better to go in for the fist bump if you can.

You may never be cured, but there are options and one may work really great for you. And when you find it, you'll know and you'll be equipped to support & help your kids through it (if you decide on them and) if they even get it. I'm pretty sure one of mine did, although not yet as bad as me. The other didn't at all. I've dealt with it for 42 years. It's still exhausting and enraging when I'm not full of Botox, but it does get a little easier as you learn that people don't notice as often as you think. I've said this before too. If someone is really put off and grossed out by it, they're probably not someone you want in your life or who's opinion should even matter to you. It's impossible to ignore, but don't let it define you.

u/BigAlligatorPears · 3 pointsr/GearVR

I purchased [this fan] (https://www.amazon.com/gp/aw/d/B01ESFZY76/ref=sxl1?ie=UTF8&qid=1467210450&sr=1&pi=AC_SX236_SY340_FMwebp_QL65) based off another user's review and it works great. I have a S7 edge which never really overheats, but I still like to use it. My friend has a S6 that overheats constantly and this fan fixed that. We've played minecraft for close to 2 hours before with out any issues

u/redalastor · 3 pointsr/Quebec

> Mon premier réflexe est d'utiliser des yubikey (je crois que c'est la version 5 qui a fido2, pas besoin de nfc) car c'est les seul que je connaisse... Mais elles sont plus cher que 25$. As-tu d'autre fabricant a conseiller?

Il y a deux séries de Yubikey récentes. Celle à 60$ qui a FIDO2 plus une tonne d'autres trucs et celle à 25$ qui a juste FIDO2 à laquelle je faisais référence. Pour l'instant il n'y a pas de d'autres manufacturier mais FIDO2 a été accepté comme standard par le W3C et le WhatWG donc ce n'est pas une technologie propriétaire. Aussi bien la Yubikey à 25$ qu'à 60$ est compatible NFC.

La clé à 25$ sur Amazon : https://www.amazon.ca/-/fr/Yubico-s%C3%A9curit%C3%A9-Fido2-USB-Prouver/dp/B07BYSB7FK/

Et Yubico vend aussi à rabais des paquets de clés mais je sais pas si c'est le cas au Canada vu qu'on ne peut pas commander directement d'eux et qu'on doit passer par Amazon et compagnie.

Correction: La clé à 25$ ne fait pas NFC, c'est 10$ de plus pour ça.

u/bkc56 · 2 pointsr/GMail

People have reported that using 2-step verification can help when traveling or using VPN. Adding a U2F device will remove the dependence on having access to your phone.

2-Step Verification (2SV)

u/CrossedZebra · 2 pointsr/techsupport

You can splice it to a 12v adapter with sufficient amps, or you can splice it to a cut USB cable and try and run it at 5V. Some case fans start and work fine at 5V, some won't. And the fan will perform lower as well at 12V vs 5V. You can get a converter cable like this as well if you don't want to splice - https://www.amazon.com/4-Pin-Sleeved-Power-Adapter-Cable/dp/B01LW50R03 - And again ymmw depending on what case fan you're using and it's specs.

Or you can just make your life easier and get an actual 5V cooling fan, and run it off USB. Like this - https://www.amazon.com/ELUTENG-5500RPM-Satellite-Receiver-Nintendo/dp/B071JB9WYB

u/teemotrippin · 2 pointsr/shrooms

humid https://imgur.com/gallery/clUJIDQ

Youll need:

  1. wide but short sterilite tub

  2. fan - ELUTENG 40mm USB Fan with 3 Speed... https://www.amazon.com/dp/B071JB9WYB?ref=ppx_pop_mob_ap_share

  3. fogger / atomizer https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F312020236124

  4. Hose - up to u , u can use water hose.

  5. drill really small holes for the fan , up to u where u wanna put it.

  6. drill hole for fogger to go thru. drill from the top.

  7. drill hole fo hose. up to u how many holes u need for hose. I got 4 atm.
u/Manzocumerlanzo · 2 pointsr/vive_vr

Hi there, I was experiencing this issue a lot but and I haven't heard of a single wireless user who hasn't to me the problem was definitely overheating.

I have purchased a 40MM ELUTENG fan , which will cost you 10-15$ tops, and attached it to the adapter like this. I have used bi adhesive tape to secure the cables to the side and the switch to the back, and a cable clamp strip to secure the fan to the adapter because I didn't feel like hot gluing it and damaging the adapter. I used the spare USB port in the front to power up the fan.

It is not a difficult operation and it did wonders to me reducing grey screens by 80% at least. Hope this helps!

u/M1shra · 2 pointsr/SteamVR
u/inibrius · 2 pointsr/techsupport

you'll want to double check that. My Antec case fans all only pull power from the 5v, both the ones powered by the mb and the ones powered via molex to the psu. And wiring that up to USB would be a matter of seconds. I just noticed that ThermalTake has a series of usb powered fans that highly resemble standard 80mm fans, that might be a starting point.

u/kzoostout · 2 pointsr/Homebrewing

A USB computer fan blowing up into the tower might do the trick. This is the one I use for my keezer. It's treated me right for a year and a half now. I've also read about people running their beer lines up the tower in a copper tube that extends down into the refrigerator part to act as a heat sink cool sink. As u/kneecapper was saying, anything to get those lines in your tower cool will probably help with the foaming.

Edit: the more I think about it, I don't think a dirty regulator would cause foaming. Maybe infected beer that tastes off (which could also lead to foaming if bugs got into the keg), but I don't think pure CO2 is very hospitable environment for most bugs, so I'm not sure if they would grow in the regulator. If your foamy beer tastes off, then I'd point the finger at the regulator.

u/sarcastic_clapper · 2 pointsr/Homebrewing

For less money than the two of them, you could get this which is what I use.

u/discordantT · 2 pointsr/SpaceBuckets

For fans I avoided a lot of the wiring (at least on the bucket lids for exhaust) by using adjustable usb fans and plugging them into a 1amp USB wall outlet (like an iphone plugs into).


https://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK/ref=sr_1_1?s=electronics&ie=UTF8&qid=1473291878&sr=1-1&keywords=thermaltake+mobile+fan+2


they push about 50cfm each and I can adjust them based on my temp readings. I did do regular wiring of a large intake at the bottom using the guides here.

As for lighting, on my CFL bucket I used one of these guys https://www.amazon.com/LimoStudio-Quality-Socket-Adapter-AGG882/dp/B0091HO0FY/ref=pd_sim_sbs_421_1?ie=UTF8&psc=1&refRID=0E6B9XSRB01D9H0K50VT


Just slaps right on the bucket lid, has dual on/off switches and avoids a lot of the wiring. Really depends on your budget.

u/LukeWarmCage · 2 pointsr/Homebrewing

> but this is almost the same price you'd pay.

$14 for a USB fan with speed controller

$4 for magnets

$0 for a cigar box.

$8 for a USB power supply if somehow you don't have one in 2018

so 1/2 the price, assuming one has zero parts at home.

u/Z-and-I · 2 pointsr/Homebrewing

Is it this one? I have that and it works well for me. I actually have to use it at the lower end of its range or it will toss my stir bar.

u/brendanmc6 · 2 pointsr/Homebrewing

Based on my setup, you need;

Decent thermometer

Auto Siphon & tubing

hydrometer

wine/beer thief

carboy or bucket for fermenting + rubber stopper & blowoff tube

bottling bucket w/ spigot

bottling wand

bottle capper + bottles & caps

I recommend 10 gallon kettle, I regret getting only 8 gal.

mesh brew bag sized to fit your kettle. Useful for both BIAB and batch sparge brewing.

Optional but very useful;

10 gallon mash tun (square or round cooler + steel braid/false bottom + brass valve) I regret only getting a 5 gallon. Easy home depot built.

DIY stirplate using adjustable computer fan + magnets + stir bar and a flask (I pull it off with a 1 gallon glass jug)

vinator

Fermentation chamber with temp controller!

u/lostnprocrastination · 2 pointsr/headphones

> The tea towel is the safety net.

You must have fallen asleep in school when they were teaching you how condensation works :p

Seriously, if you are unaware of how condensation forms, please take the ice pack off. I am going to think about some solutions for you while I play some Insurgency and chill out for a while :)

edit- pick one of these up, plug it into the back of your monitor and set it up blowing over or in the back of your amp. The fan has fully adjustable fans, I use two of them for my entertainment center and they've been working with no problems for years.

http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK/ref=sr_1_3?s=pc&ie=UTF8&qid=1422167200&sr=1-3&keywords=usb+fan

u/JustPandering · 2 pointsr/Homebrewing

I built this for about $20 (not including the erlenmeyer and the stir bar).

I got the cigar box a while back at a second hand store.

Here's the USB powered PC fan I used:
http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK/ref=sr_1_2?ie=UTF8&qid=1381376532&sr=8-2&keywords=usb+pc+fan

I chose a usb fan so that I could power it with an android usb phone charger and not screw around with splicing wires.

Here's the magnets I used (just needed one though):
http://www.amazon.com/gp/product/B00B1M37MY/ref=oh_details_o00_s00_i02?ie=UTF8&psc=1

Aside from that it just took a few odd nuts, washers, and a bit of superglue. I had to bore the hole in top of the cigar box because the box turned out to be a bit too thick (sorry Pepin Garcia!) to get enough attraction between the magnet and the stir bar. I think I might have had better luck with stronger magnets or a different stir bar but oh well.

As someone suggested I first glued a washer to the fan so that I could move the magnet around a but to find the sweet spot where it didn't shake too bad then I glued the washer in place.

I used the long bolts/nuts that came with the fan to attach it to the lid (you can see the bolts in the first picture). Between the top of the fan and the lid I had to add washers to keep the fan from rubbing on the cigar box.

That's pretty much it. The fan has a variable speed control but I get a small vortex on the lowest setting, and higher settings throws the bar off the magnet.

Now I just need to wait for my soda preforms to show up so I can start saving a bit more yeast after I use the stir plate!
http://www.amazon.com/Soda-Bottle-Preforms-Caps-30/dp/B008MB1QNY/ref=sr_1_1?s=industrial&ie=UTF8&qid=1381377304&sr=1-1&keywords=bottle+preforms

I got the idea for using the soda preforms from here:
http://www.mikebeer.net/reuseyeast.htm

Cheers

u/jakl53 · 2 pointsr/Homebrewing

It looks like I have a defective usb fan. I bought a usb fan for use in a stirplate. It has a variable speed control knob which appears to have quit working. It is currently stuck on one speed. I decided to get the box setup anyways hoping the one speed would work. It doesn't and I need that speed control back. I will drop a link at the bottom of the post of which one I used. Anyone have any idea what went wrong? I think it's just a bad knob. But is there something I can replace it with? The knob is just two wires by the way.


https://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK

u/Ciguard · 2 pointsr/cigars

Took the two bottom shelves on mine . Threw in a glass top humidor at the bottom to keep my Cubans in and stacked my full boxes on top of the glass top. My other loose sticks go on top drawer. Using 6 60g 65% bovedas in the cigador and 2 62% 60g in the glasstop (because it's just so easy ) Also threw in this fan in the back somewhere running 24/7 and haven't an issue with humidity yet and the humidity and temp is almost the same all around . Also plugged the hole at the bottom where humidity can escape from .

u/PenPenGuin · 2 pointsr/DIY

Very neat, I might have to try this out.

Might I suggest looking into the Thermaltake USB Fan as well? As a plus, once fruit fly season is done, it's actually a nice desktop fan.

u/nickmv5 · 2 pointsr/Homebrewing

Another great option, if you don't feel like going through the effort of a fully-DIY, is this Thermaltake fan.

I use it on my setup (let me see if I can find a link to it), and it simplified the build a good bit, for minimal price. You can find em on eBay w/free shipping too.


Edit: Here is my build using the Thermaltake fan.

u/Bargoss · 2 pointsr/hermitcrabs

As Spizam said, there seems to be a sweet spot, and if I keep my humidity below 85% the glass is always clear. I also have this small computer fan suspended inside my tank with suction cups and fishing line, which gives the crabs a slight breeze and also helps with glass fogging and keeping mold growth on my wood parts inhibited.

u/RangersCrusader · 2 pointsr/NintendoSwitch

I ordered a tiny USB powered fan on Amazon I plan on putting behind my switch and I'll leave the gate open.

This one

u/exileonmainst · 2 pointsr/Homebrewing

I bought these ones from Amazon. They're currently $5.60 and Prime eligible. I stacked 3 on either side and they work really well. Word of advice: wear gloves when supergluing them. These little suckers are super strong and when you're trying to neatly glue them together into a stack, they fly out of your fingers and glue smears everywhere.

http://www.amazon.com/gp/product/B001KV38ES/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Also, if you want to make things even easier on yourself, get this fan from Amazon for $10.99. It's cheap, USB powered, and has an adjustable power setting already, so you don't need to do any wiring. Just remove the grill and glue on the magnets. You can then make a box, or just stick it between 2 big books or something.

http://www.amazon.com/gp/product/B00080G0BK/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1

u/BransonKP · 2 pointsr/Homebrewing

Cheap and easy stir plate!

  • Found the fan at my local tech store for $12, and Amazon.com has it here: http://amzn.com/B00080G0BK
  • One washer was $0.45 from Rona
  • A pack of ten 1/2" x 1/12" neodymium magnets was $2.31 shipped from China
  • Screws and nuts were ~$5 from Rona
  • The craft box from Michael's was ~$4.

    I had some Krazy Glue from a previous project on hand, but it would cost around $3. Total cost: ~$25!
u/danielmiller19 · 2 pointsr/Homebrewing

I bought this and put it in there. Just need to add a USB to standard plug adapter and it works great to get air circulating.

Link: https://www.amazon.com/gp/product/B00080G0BK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

u/The_Ethernopian · 2 pointsr/Homebrewing

I built mine using this: https://www.amazon.com/gp/product/B00080G0BK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 and haven't had any issues. Most starters are at its lowest speed setting.

u/discosanta · 2 pointsr/cigars

I had the same issue in my CC-100H

I added one fan and it resolved all my issues.

I also ditched the Butler and went with Sensorpush sensors as I found the Butlers to be wildly inaccurate.

u/Doug2590 · 2 pointsr/Homebrewing

I just finished mine today actually. Crazy easy man- Just get a computer fan and some magnets. I bought a fan that already had a potentiometer, used gorilla glue to stick a washer on the fan, and the magnets are attracted to the washer enough to not budge.

Here's the fan: http://smile.amazon.com/gp/aw/d/B00080G0BK
Magnets: http://smile.amazon.com/gp/aw/d/B001KV38ES

u/Diabeticon · 2 pointsr/Homebrewing

It looks like it might be the USB to 3-pin that comes with this fan.

Source: I used that fan in my stir plate and it looks like that, too.

u/Fwob · 2 pointsr/Shoestring

You won't be able to spend much time in it during the day without it running because of the heat. I bet it would be tolerable at night though.

I have a usb battery pack that would be great to charge during the day and used to power a small fan at night. You can run those fans just about all night with that 10a block. The power block has so many uses too, power a flash light, charge your phone, power a portable router to set up wifi, etc.

The next most important thing is privacy. Even with very dark tint, with it being dark outside anyone using any sort of light inside will be detectable. Stealth is pretty important for urban car camping. It might not always be illegal, but in the US at least if cops see someone just sitting in their car late at night outside a business or in a residential area they might come snooping around. Residents might be equally suspicious. It's best if no one knows anyone is in the car. A reflective windshield insert is great for the front window, but you'll have to make your own for every other window. You won't want it to be reflective either, because it's obvious the windows are covered that way.

An easy way to deal with this is to cut cardboard pieces for every window, including the back glass. Then cover one side with a glue stick or spray adhesive and cover it with any sort of black cloth. Pop the window covers in and make sure there's no light leakage. The black cloth makes it look like super dark tint, and no one suspects a thing.

As for where to park, I'm from the US and aren't sure if all of these will be useful where you are. Just about any business that's 24 hours with a good number of cars in front of it is fair game. Big retail chains are common in the US and have enough people even in the latest hours of the night to not draw attention to a car sitting all night. We also have truck stops on just about every major highway. These are big gas stations made for long distance truckers, they typically have showers and bathrooms for a fee, and plenty of areas to park free of charge. I've had a lot of luck with hotels too. The more cars the better, just make sure they don't have any sort of parking pass on them. Residential areas work in a pinch. Nobody suspects someone is sleeping in a car as long as you've made a minimal attempt at staying stealthy. You can even get away with it in very urban areas.

My fiance and I went to New York City last weekend in our minivan. We were lucky enough to find an open parking space and set up camp. We have a blow up mattress we throw in the back and spent all day in downtown Manhattan. We slept like babies and had plenty of room to stretch out. It's actually the entire reason we got the minivan, we don't even have kids. People always look at us funny when we tell them that. This allowed us to save $400 since we didn't need a hotel for 2 nights, and we have a gym membership with a gym in just about every city. We were set up in one of the biggest, most urban, and expensive areas in the world and didn't have to spend a dime on lodging the whole weekend.

I hope this helps someone, please ask if you have any questions!

u/bluedreammaster · 2 pointsr/microgrowery
  • Ecoark 45 Gallon Wheeled Trash Can - 20$ Walmart

  • Coghlan's Emergency Blanket - 5$ Walmart

    3M 77 spray adhesive- 10$ Walmart

    120 mm fan filter - 10$ Amazon

    Dual 80 mm fans - 14$ Amazon

    120 mm fan - 17$ Amazon

    KINGBO 45W LED Plant Grow Light - 30$ Amazon


    Cut a hole for the 120 mm fan dead center in the front like in the video. Insert and then attach filter. This is the fan that pulls fresh air

    Cut two holes in the lid for the 80mm fans. I did mine in the back by the handle, these are the exhaust fans.

    before inserting and attaching fans spray the inside with the adhesive and attach the blanket

    Drill a tiny hole in the center of the top so you can fish the light hanging cables through which will allow you to raise and lower light as needed.

    Then I hot glued a power strip to the back for all the power needs
u/cuntywaffles · 2 pointsr/DIY

I've used this for a few years with my audio receiver. Turns on when there is power and off when there isn't. Works really well. Not 120mm, but does the job for me. Nice project!

u/ezekielvander · 2 pointsr/NoMansSkyTheGame
u/Frostybev · 2 pointsr/Homebrewing

Just purchase this fan, glue on some magnets and you have a stir plate. It's big enough you don't have to mount it into anything else if you don't want to.

https://www.amazon.com/dp/B002OJN250/ref=twister_B00VX30760

u/Anheroed · 2 pointsr/funny
u/Boss_McAwesome · 2 pointsr/Homebrewing

After the line fills with beer is it leaving the tube? Is it leaking everywhere? A big possibility is that the tube is warmer than the keg, and that will cause the co2 to leave solution, and then you'd have co2 pockets in the tube (causing foaming). Your kegerator might have really stratified temperatures, so you could get something like this if you've narrowed down temperature as the cause.

u/diarh34 · 2 pointsr/MechanicalKeyboards

I like the volume knob. They should just leave it up to you what you want to do with the other one. Like a PowerMate

u/majoroutage · 2 pointsr/htpc

There are some HTPC cases out there that have volume knobs on them. Antec Fusion and a couple Silverstone models come to mind.

Alternatively, you can just get your own knob.

u/shadyinternets · 2 pointsr/headphones

http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA/ref=sr_1_1?ie=UTF8&qid=1427132346&sr=8-1

plug it into your comp, and it controls the volume of the comp. that simple. it can do other neat stuff too if you set it up.

u/Khanja · 2 pointsr/MusicBattlestations

does this do anything more than what the iGriffin Powermate does?
I'v been wanting a powermate for a while just for the big smooth knob for volume & multifunction purposes.

-- Griffin Powermate -- (4/5 stars on amazon)
http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/product-reviews/B003VWU2WA/ref=dp_top_cm_cr_acr_txt?ie=UTF8&showViewpoints=1

u/Strongdickwarrior · 2 pointsr/battlestations

Here is a an amazon link. There's a newer bluetooth version but it has more mixed reviews.

u/CapnCrunchMD · 2 pointsr/Surface

I've seen a couple people that get a USB powered fan and point it at the area that gets hot on top of the CPU.

https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_apa_AoxJybKESRJER

u/Holop_dolop · 2 pointsr/SurfaceGaming

With my surface book, I've had far more success getting one of those USB fans and angling it towards the back of the tablet portion. It's far more portable, cheaper, quieter, and cools just as well if not better because you can direct the air flow exactly to where you need it.

Arctic ABACO-BZG00-010000 ARCTIC Breeze Mobile - Mini USB Desktop Fan with Flexible Neck and Adjustable Fan Speed I Portable Desk Fan for Home, Office I Silent USB Fan I Fan Speed 1700 RPM - White https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_apa_i_j3T4Ab0RSPGEB

u/tcoder · 2 pointsr/Surface

I think this is it. Link

u/DerpyDreads · 2 pointsr/Surface

Do you think this would work better than one of these placed towards the right corner?

u/Snackie56 · 2 pointsr/SurfaceGaming

This shouldnt happen if you're using an external fan. I use a usb fan plugged into the surface and I never experience throttling, while playing any of my games- whether it be cs:go, civ 5, overwatch, rocket league. I do not even undervolt.

You must either have a defective unit, or you're using your fan incorrectly. I use the arctic breeze usb gooseneck fan, and I point it at the upper right hand corner of my surface. The surface blows hot air out the left side. Do not point it at the left side.

If you wanted a laptop for gaming, you should've gotten a regular laptop in the first place, or at best- a gaming laptop. This could all be made extremely easy through using this simple 7$ fan, http://www.amazon.com/ARCTIC-USB-Powered-Portable-Solution-Gooseneck/dp/B003XN24GY/ref=sr_1_1?ie=UTF8&qid=1465169109&sr=8-1&keywords=arctic+breeze+usb+fan

u/ThatNakedGuy7 · 2 pointsr/macmini

Mine runs hot when I'm using Photoshop. I've read elsewhere that the heat is within Intel specs.
Regardless, I bought a USB fan that I point at the Mini, and it cools it down great.

https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_em_r_mt_dp_U_NxCyDb335Y7YE

u/innnnmotion · 2 pointsr/onebag

Y'all may laugh, but this usb travel fan. There are so many times that I stay in dorms and just need a little bit of moving air and this thing has come in handy countless times. I can think of one particular stay on the beach in Guatemala in a hostel with pod beds and no fans provided. Everybody complained and was miserable. I wasn't as jolly as if I had an actual fan or AC, but I sure was doing better.

It plugs straight into a usb, makes no sound, and is light enough that I'm happy to justify it.

u/Rhiordan · 2 pointsr/Surface

There are tweaks you can do to make it not throttle. You need to change the power options which requires you do go into regedit and make a simple change. Here's the link on how to do it.

http://forums.windowscentral.com/microsoft-surface-pro-4/403403-no-more-throttle-fans-surface-pro-3-4-a.html

I can now game on medium settings without it throttling. Plus, get this fan...

http://www.amazon.com/ARCTIC-USB-Powered-Portable-Solution-Gooseneck/dp/B003XN24GY?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

It's not too loud and it keeps the back of the surface cool.

I should say that I have the i7 16gig so I have the 540 vid chip, but I'm sure it will work also for the i5 version.

u/Randomhkkid · 2 pointsr/Surface

I use a small usb fan pointed at the top right to completely eliminate thermal throttling, the bigger issue is actually power limit throttling, this caps the package at ~25watts (IIRC) which limits scenarios where the CPU and GPU are being pushed simultaneously (Like gaming).

The fan I use

u/SkaveRat · 2 pointsr/oculus
u/rhogotargaryen · 2 pointsr/Surface

I think your customers would appreciate that! they were as low as 5$ once as add on items. Artic Breeze Mobile

u/2roK · 2 pointsr/pcmasterrace
u/chrisjbrooks · 2 pointsr/Surface

If you want to play games, or do more intensive stuff, I highly recommend getting a usb fan and angling it towards the back of it.

I have this one: http://www.amazon.com/ARCTIC-USB-Powered-Portable-Cooling-Solution/dp/B003XN24GY/ref=sr_1_2?ie=UTF8&qid=1418141700&sr=8-2&keywords=silent+usb+fan

I use my surface every day as my main work device and with this little fan pointed at the back of it, I never ever hear the internal fan spin up to an audible level. This little fan is near silent as well. So that should help with throttling issues while gaming.

I also recommend using IE. The touch version is seriously the best thing since sliced bread when I am just casually browsing. I use regular IE for work. I just decided to never install chrome since getting the surface and haven't looked back yet.

I would also recommend getting familiar with onenote. It is a great program and if you make the initial commitment to use it for a bunch of stuff and create an organization scheme that works from the start, you will thank yourself later when you are trying to remember your thoughts on Harvard's 19th century curriculum choices two years down the line.

I'm sure others have more advice.

u/IncultusMagica · 2 pointsr/pcmasterrace

You might want to get one of these for the adjacent USB port https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_api_iTKHzbQJKM91T

u/the_resident_skeptic · 2 pointsr/GearVR

They certainly do but weight might be an issue I think. The lightest solution I can think of is a small 5v fan like this pulled from an old video card or something wired to a battery pack (2 or 3 AAs). A few aluminium L brackets and some velcro should do it. Could even wire in a switch or a potentiometer to control it. I have a 1.5"x1.5" 5v fan here and it weighs 26g. Won't spin at 3v though :(.

USB fans would be quite a bit heavier. This one is 90g There's already half a kilo (1.1 lbs) hanging off my face and it's already pretty uncomfortable for me due to my "roman nose". Need to sew a thicker pad methinks.

u/albinoyoungn · 2 pointsr/Surface

ARCTIC Breeze Mobile USB-Powered 92mm Portable Fan, Portable Cooling Solution, Quiet Fan - White https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_awd_AJuZub0YGZ8QE
https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_awd_AJuZub0YGZ8QE

One of these and point it at the top right (left if you are looking at it) corner in the back.

u/cdoublejj · 2 pointsr/homelab
u/Octoplow · 2 pointsr/Vive

I'm skeptical after trying a similar "forehead fan" on my DK2:
https://www.amazon.com/gp/product/B003XN24GY/

I found it better to have an oscillating fan blowing across the whole playspace. Has any reviewer compared to a regular home fan?

I'd love to cooling or a little airflow inside the HMD somehow. But, the next best thing for me is cooling the sides of my neck using an "ice bandana" full of small frozen gel packs.

u/MakeDreamsReal · 2 pointsr/RASPBERRY_PI_PROJECTS
u/zackiedude · 2 pointsr/ffxiv

Make sure your battery settings are on "High Performance" and try getting this fan. It's completely changed how the game runs. http://www.amazon.com/gp/product/B003XN24GY/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1

u/dptt · 2 pointsr/axolotls

I had my little guy in a 5g when I got him and used these to keep it cool. (linking directly to usa amazon just so you know what I got but you'd probably be better off finding the same/similar on a more appropriate site for your location!)

USB Fans (x2) https://www.amazon.com/gp/product/B003XN24GY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 - these are SUPER quiet - could barely hear them when running!

USB Hub - I covered up the two remaining ports with tape so water didn't get in it, but you could also just get a hub with two ports instead of four! https://www.amazon.com/gp/product/B00XMD7KPU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Extension cable to plug in the hub to my power strip that had usb outlets. If your power strip doesn't have a usb port then you'll need to get a brick as well. https://www.amazon.com/gp/product/B00007FGU5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

​

In the North Carolina summer at 90-110 degrees F, this kept my tank at about 62-65 F

u/edmanet · 2 pointsr/BitcoinMining

With only one I wouldn't worry about, as long as there is some airflow around it, cooling it won't be a problem. If you have 5 spaced close together, you probably want to get a fan for them. A lot of people use this one: http://amzn.com/B003XN24GY but a $5 desk fan from Walmart would do the trick.

u/atag012 · 2 pointsr/buildapc
u/sketchy270 · 2 pointsr/pcmasterrace

I was looking at these for awhile because they're USB powered but I never ended up buying them

u/SnapHook · 2 pointsr/gamingpc

Specs: i5 3570k, Gigabyte 7970 xfire w/ Sapphire 7950, 128 gb Samsun 840 ssd, 1tb WD HD. A shit ton of corsair fan's I bought off my buddy for a 24 pack of beer. The Hyper 212 makes a comeback cuz my Zalman lq320with its really fat radiator wouldn't fit in the top intake fan spot. It hit the 140mm mounted on the roof. And I didn't like how it crowded the Gpu's in the other two spots.

Like I said in the imgur comments, there are still a lot of small upgrades I'm planning on doing. The big gaping holes under the two hd bays are very annoying. Does anyone have any experience with Demciflex? they sell a dust filter kit specifically for the 540.

Also, any one have a suggestion to better light this guy? I bought these Antec led lighting strips but they're usb powered and I didn't realize the 540 doesn't have water cooling holes in the back. I was looking at the NZXT Hue earlier today, they seem really interesting.

And I need a fan controller that fits in a single 5.25 bay and looks decent mounted sideways.

Edit: just wanted to add that I was very happy with the quality of this product. I've always been a sub $100 cheap case user and using this corsair case was an eye opener. My only complaint is that I actually would have spent a little bit more for just a few small additions. (Air filters for all the vents comes to mind)

u/torville · 2 pointsr/BeAmazed
u/Blue_Sassley · 2 pointsr/gifs
u/AgntDiggler · 2 pointsr/PUBGXboxOne

Personally I use my own external 120mm External Fans. AC Infinity Dual fans these are quiet and plug directly into USB on xbox or you can use a a usb brick. I realize you shouldn't be forced to fix this yourself but I use these on my router, modem, AV Receiver and desktop amps. Well worth the price. I've had some success with cheaper fans also w/ rgb but would say these have been the most reliable.

u/PetiePal · 2 pointsr/hometheater

I would say for each shelf to have a square or circular cut out, and invest in some AC Infinity fans. I'm planning to build out a new entertainment center when we move in September and I'm using Ikea Besta low profile tv stand, (I have a 4 shelf now, moving up to a 6 or 8), and I plan to use these to keep things cool since I have a lot of components to work with

AC Infinity Multifan S7 Quiet

and the Temperature Sensor

u/Aaronsif · 2 pointsr/xbox

I have a similar setup for my Xbox. I cut a small hole in the back panel (that can't be seen behind the xbox). I'm also going to order these fans to increase air flow.

u/danTHAman152000 · 2 pointsr/Ubiquiti

I have a simple similar set up.

https://www.amazon.com/dp/B00JLV4BWC?ref=ppx_pop_mob_ap_share

Add a pair of these fans and your temps on your equipment will drop in half.

u/DanTheMan941 · 2 pointsr/SpaceBuckets

I know its not quite what youre looking for but i went with these and im not sure why many others dont. No wiring at all.

https://www.amazon.com/dp/B00JLV4BWC/ref=cm_sw_r_cp_apa_i_UryyCbMMW0F9E

u/TactFully · 2 pointsr/buildapc

Maybe something like this. Note that this was a quick search by me, I haven't done extensive research into other models.

u/Mark_M01 · 2 pointsr/hometheater

Well I let the receiver cool down and now it seems everything works again. So I'm going to purchase small fans like these to place on top to remove the hot air from the receiver.
https://www.amazon.ca/gp/product/B00JLV4BWC/ref=ox_sc_act_title_2?smid=A11F824V94PA8T&psc=1

u/AtomicFlx · 2 pointsr/modelmakers

Number one trick to drying your paint. NEVER USE RUSTOLEM. God I hate that crap. It never dries. I have a shelf going on 4-5 years that I painted with basic eggshell black rustolem from home deopt and its still tacky. Things like books and glass candle holders still stick to it. Krylon is good but valspar is also kinda crap. I threw out all my valspar and rustolem paints about a month ago. Just said fuck it, its not work the headache.

As for an airbrush. I've never had problems with model paint drying. Even artist and craft acrylics dry just fine. I have on occasion put things in the oven on the lowest setting.

I think my most valuable device I have for drying is a [small USB powered desk fan] (https://smile.amazon.com/OPOLAR-F401-Personal-Operation-Compatibility/dp/B00WM7TRTY/). This is seriously the best thing ever. I can run it off a USB battery pack for about 8-10 hours or just plug it into the wall. I have a mini drying fan anywhere I need it. I have actually used one so much it wore out and I got another 2 just to replace it.

Wash a part before paint, put it in front of this fan, paint a part, in front of the fan. Glue drying, get the fan. Shoes got wet, put the fan on top. Clean the Vacuum filter, use the fan. Spill water in the car, grab the battery pack and the fan. Shampoo a spot of cat barf on the carpet, grab the fan. WiFi router overheating in the summer, get the fan. I know it seems like such a silly tiny fan but I use it at least once a week for something.

u/PhoenixVA · 2 pointsr/camping

I got this fan recently and it's perfect for camping. Three speeds plus a night light LED function. Charges via USB and lasts about 8hr on low, which is a decent breeze, I rarely find I need to crank it up more.

u/aardy · 2 pointsr/RealEstate

Programmable USB LED fan. Not ideal because it's Christmas, but might get your brain juices going.

During the last big week long heat wave where I live this summer past, a PMI sales rep brought our office a bunch of fans. "Be a fan of xyz PMI." Certainly stood out. Cheezy as hell, "be a fan" on a fan... ha! 10/10 for execution due to the timing of it with the heat wave. Filing that one away myself for the next heat wave.

I can't really think of the cold/winter equivalent of that. Maybe muff handwarmers?

u/Sho_nuff_ · 2 pointsr/DJs

(New RGB version) USB LED RGB Programmable Fan for PC Laptop Notebook Desktops Flexible Gooseneck Mini USB Programmable Fan https://www.amazon.com/dp/B01LS02JOU/ref=cm_sw_r_cp_api_i_ypDVDbPM387AV

u/unoriginal_user24 · 1 pointr/preppers

I like these

Thermaltake Mobile Fan II Adjustable Speed External USB Cooling Fan with One-touch Retractable USB power cable box for Notebook Laptop Desktop. A1888 https://www.amazon.com/dp/B00080G0BK/ref=cm_sw_r_cp_apa_i_YN-jDb61DE7QR

I have one for each person in the house. Adjustable speed is really nice, you can dial in the exact noise/breeze you want. I've fallen asleep with one of these plugged into a battery bank, blowing from my head down across the couch.

Sleeping without A/C in the south really sucks. Having a fan makes it suck slightly less.

u/lepermessiah57 · 1 pointr/cigars

I've been using http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK/ref=zg_bs_3015416011_15 in my wineador for awhile now. It works great. I have it hooked up to a mechanical timer to run for 30mins every 2 hours. I almost never have to mess with the humidity.

u/justsomeguy_youknow · 1 pointr/pics

So other than style, what differentiates your product from the myriad other USB powered fans on the market? It looks cool, but at the end of the day it looks like it's just a case fan inside an enclosure with an adapter for USB power. What makes your product better than something like this or like this?

u/Chaaru_ · 1 pointr/PS3

This is the exact one I'm using. I got it in-store at Fry's Electronics, and it was on sale at the time. http://frys.com/product/5442979

Amazon has it for a tad cheaper atm http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK

Basically any USB powered fan should be fine. I have the PS3 placed vertically, with the USB fan resting on top to help blow hot air out.

u/demalo · 1 pointr/pcmasterrace

You need to hook up a few of these babies. Find out how you can sink in the variable setting to your speed in the game. Will probably need some output interface coded.

u/ldubs889 · 1 pointr/Homebrewing

here

I think I paid like 15 bucks. Its on sale all the time.

u/moggd · 1 pointr/DIY_eJuice

Here you go: http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK/ref=sr_1_1?ie=UTF8&qid=1417555015&sr=8-1&keywords=thermaltake+usb+fan

There is a 120mm one as well if you want that. I found some info on forums online, seems like a lot of beer brewers have made a magnetic mixer with it before. You could probably find a tutorial. Seems legit.

Cool thing about this is that you can use any USB phone charger you have laying around to power it.

u/david76 · 1 pointr/htpc

I have the same setup in my cabinet. I used a bunch of USB powered variable speed fans so when the device comes on, the USB fan turns on. I have the speed turned down so the fan noise isn't noticeable.

Here's the fan: http://www.amazon.com/dp/B00080G0BK/ref=pe_175190_21431760_M3T1_ST1_dp_1

u/Moomoshi · 1 pointr/PS4

Mine too gets so warm. Should i buy the usb fan?http://www.amazon.com/dp/B00080G0BK/ref=cm_sw_r_udp_awd_sI1ltb0538GTA. Where should i put it?

u/J33Pair · 1 pointr/BBQ

Been following the iQue since its development and release. I too would love to hear about anyone with experience with one.. I have to admit that I have the Stoker (best Christmas present ever). Stoker kills the BBQ Guru. Love the reporting ability the Stoker has, allows for smarter cooks. I needed a bigger fan as well, the 5 cfm didn't supply enough air... so I got this fan.

u/Chitties_6941 · 1 pointr/cigars

No, maybe 1 degree if that. I have a small fan in the bottom on a super low speed that circulates the air though. This one if you're at all interested.

u/whyisalltherumgone_ · 1 pointr/Homebrewing

Definitely for me. I'm not sure how difficult it would be on your part to offer it with and without, but that would probably be a good option to provide also.

If this helps you this is the fan that I used and seems to be the most often recommended one for builds.

http://www.amazon.com/Thermaltake-Mobile-Fan-External-Cooling/dp/B00080G0BK/ref=zg_bs_3015416011_3

So at $16 without the magnets and the precision that your product would offer, you can see why a $20 price point would be appealing. Let me know if you need any more feedback from a consumer point of view.

u/Chalmun · 1 pointr/PS3

If it's in some sort of cubby and feels warm, you can get a decent and cheap USB fan to circulate air. I have this one and it works great.

u/themikelee · 1 pointr/Homebrewing

heres the one i used

its double the price now but still cheaper than a stirplate you'd get anywhere else. I made a couple little mods on it. replaced the screws with some longer bolts to raise it up a bit and added some spacers under that "grill" looking thing to keep the magnet from sticking to it. I'll send you some pics of the whole thing if you want.

u/imnotbillyidol · 1 pointr/homelab

If you've got a spare USB port, this exists. Haven't tried it myself though, and there may be cheaper elsewhere: https://www.amazon.com/Thermaltake-Mobile-Adjustable-External-Cooling/dp/B00080G0BK

u/LittleHelperRobot · 1 pointr/Homebrewing

Non-mobile:

u/Bultreys · 1 pointr/Surface

I've also been considering this issue over the last day or so and will be trying a slightly different approach. Rather than blow air into the vents I'm going to apply an 80mm variable speed USB powered fan to the rear top right (where the case heats up significantly) using suction cups, blowing a decent volume of air directly onto the area.

I'll be travelling for four months and think this will be easy to carry and apply when I feel like "Steaming it up" (edit: I deserve to be shot for that pun) and am optimistic that when combined with OS optimization (process culling) and CPU undervolting that the throttling can be contained.

u/musictheorist · 1 pointr/hometheater

I used a very similar fan in my setup for a while. The one I linked has adjustable speed, so you can prioritize sound and necessary airflow. I plugged it into the front USB port on my Denon and just wrapped the cord underneath so that it was barely visible. If the receiver was on, it powered the fan automatically, so it worked really seamlessly.

As for cooling two levels, I'm pretty sure it would not work well for that without a large opening between the two levels for airflow. Maybe show us a pic/sketch of the shelf setup?

u/andersonmatt1125 · 1 pointr/Homebrewing

Or you can just buy this and two magnets. the fan already comes with the power supply, and speed controller. All you need to do is glue two magnets to the middle of the fan, and it's a fully functional stir plate for $12.

u/Bug42 · 1 pointr/PS3

Mine was doing the same thing as well. I sent it in for repair, and a year later it started happening again. I tried everything. The thing that finally worked was this. It is a USB fan. My PS3 was getting to hot where it seats in my entertainment center. I have not had any random shut downs since putting this behind my ps3, and letting it run.

This may not fix your issue, but it may help, and it is a lot cheaper then sending it in for repair.

u/BielStok · 1 pointr/cigars

i use this fan it has a flat usb cord so you dont have to drill through the back but it still holds its seal. also it has a variable speed control i jyst leave it on the lowest setting

u/wizzard21 · 1 pointr/cigars

Thanks everyone. I had some wire laying around, so I emptied the wineador and tested out running the wire through the drain hole and it was actually really easy. I went ahead and ordered two fans and an outlet timer.

http://www.amazon.com/gp/product/B00080G0BK/ref=od_aui_detailpages00?ie=UTF8&psc=1

u/crazyrawkr · 1 pointr/cigars

Basically what I did was got this fan and connected it to this timer

I didn't use the cord that came with the fan, instead I got a DC cord from Radioshack (you can probably find something cheaper online). I cut the DC plug off the end of the cord, ran that through the drain hole and connected the wires to the fan and taped everything up with electrical tape.

I sealed the drain hole with insulation foam and then covered that with electrical tape for good measure!

I hope that makes sense!

u/OrangeCurtain · 1 pointr/Homebrewing

Have you made a stir plate yet: http://www.amazon.com/gp/product/B00080G0BK/

u/dawalker33 · 1 pointr/Homebrewing

I built mine using this fan. It has built in speed control so no need for extra parts other than a USB power source. I just used and old iPhone AC adapter and stuck the fan inside a small cardboard box with a small hole cut in the top for the magnet. Total cost was less than $15.

u/britjh22 · 1 pointr/Homebrewing

I built mine, and that was part of what made it fun. This fan + a hard drive magnet + a cigar box from a friend + some wood + extra usb phone charger I had sitting around.

u/m0h3k4n · 1 pointr/SpaceBuckets

I am assuming you are in the uk.

3x These ~£36

2x storage bins stacked opening to opening. ~£20?

Potting soil with perlite. ~£19

Fans ~£13

Flowering Fertlizer ~£14

Seeds ~£14

£125ish should get you going. As you go you might want a few things like wire to train the plant so it better uses the space.

u/RandyMarshCT · 1 pointr/Homebrewing

You need a fan or fans. The temp at the bottom of the keezer is colder than the top. When you raise the temp of beer as you pour it, the CO2 comes out of suspension. Even if it's just 5 degrees. This is why people have so much trouble with towers. If you can homogenize the temp in your keezer, you don't need long beer lines. Also, you want small inside diameter on your beverage lines. I find that 3/16" ID tubing is best.

I use 5 foot beer lines, run at 36 degrees F, keep pressure at 12 psi, and have no problems at all.

These are the fans I use: http://www.amazon.com/Coolerguys-Dual-80mm-Cooling-Fans/dp/B002NVC1DS/ref=sr_1_3?ie=UTF8&qid=1464374705&sr=8-3&keywords=usb+fans

u/Incursus · 1 pointr/hometheater

I've got a set of these and they work great. Should be exactly what you're looking for. My old Yamaha receiver would get so hot that it would burn my hand if I touched the top. These fans keep it cool to the touch and they're silent when running. Just make them both blow down into the receiver vents.

https://www.amazon.com/dp/B002NVC1DS

u/SangestheLurker · 1 pointr/xboxinsiders

I have the fans that are cooling my console plugged into one of the tv's USB ports so when the Xbox boots and eventually turns the tv on, it also powers the fans. This won't help with the Xbox when it's updating in standby, but the rest of the time it works pretty well. When I upgraded to an X from an S model, I couldn't believe how much more heat the X was generating.

(For reference, I'm using this big guy in the back of the cabinet to pull the hot air out - AC Infinity AIRPLATE S5, Quiet Cooling Fan System 8" with Speed Control, for Home Theater AV Cabinets https://smile.amazon.com/dp/B009CNR0I6/ref=cm_sw_r_cp_apa_i_i1yACbZ7YR8F3
And several fans of varying sizes along the side of the console at an angle to push the heat towards the exhaust fan -
Coolerguys Dual 80mm USB Cooling Fans https://smile.amazon.com/dp/B002NVC1DS/ref=cm_sw_r_cp_apa_i_z4yACbHSEMT9X )

u/bmooreskier · 1 pointr/laptops

great idea! i've got an oddly placed usb port that i was going to close off anyway. Also found this: https://www.amazon.com/Coolerguys-Dual-80mm-Cooling-Fans/dp/B002NVC1DS

If I only have fans on one side, I want them blowing out right? Not in?

u/LaboratoryRat · 1 pointr/DartFrog

Yup! That's great advice. Springtails and isopods are also super easy to keep a colony of and grow on your own too. Just a slice of raw potato for the isopods and some grains of rice/brewers yeast/fish food for the springtails and they take care of the rest. I keep separate colonies of the isopods and springtails in separate plastic containers (1 to 2 cups in size) and will add them to my terrariums when ever I see the population in the container has a lot in it.

Josh's frogs is a darn good website too in my opinion. Not the cheapest but what I've gotten has been good quality and his informational videos are good too.

You may want a small circulation fan in there too. Depending on the type of frogs it helps with the airflow and if you aim the air stream at the front of the glass it helps get rid of the condensation on the viewing glass side.

I'm not an expert by any means but you want to make sure the roots on the bromeliads aren't buried in the substrate. I've killed all the ones I've "planted". Mine just like to be set on the top of the ground or tied to the back wall with the roots exposed.

Good luck and take lots of pictures and thank you for sharing!

Heres a link for some in expensive fans you can use in the terrarium. Just maybe glue some mesh over the uncovered side of the fan (just so no froggy accidentally gets nicked). I used hot glue or magnets to hold it to the top of my terrariums. Also you should have a way to measure the % humidity and temperature in there. (I'd avoid the cheapest ones since they are usually not very accurate from what I've found).

u/kenanali · 1 pointr/PS4Pro

PSA. I got a few of these USB powered fans. https://www.amazon.com/Coolerguys-Dual-80mm-Cooling-Fans/dp/B002NVC1DS

I plugged them into the USB port on the PS4 so they only turn on when the PS4 is on and with rest mode they stay on for 3 hours after the PS4 is off to remove residual heat. My shelf is also one side open but using two fans I can create a bit of a wind tunnel with air going in one side and out the other. I plan on cutting holes in the back and permanently installing the fans but just havent gotten around to it yet.

u/praxworx · 1 pointr/PS4Pro

I know it’s not about replacing the internal fan. But this is what I ordered this past week and connected to one of my Pro ports; it was easy and does the job very nicely.

Thermaltake Mobile Fan 12 External USB Cooling Fan 120mm AF0007
https://www.amazon.com/dp/B002OJN250

u/T0dd_Flanders · 1 pointr/Homebrewing

This might not be the most helpful reply but if things don't work out you might consider this Thermaltake USB Fan. It has a built in speed control and uses a USB for power so no wiring necessary. I used this to build my stir plate and it has done the job and ran me about ~$20 to assemble (Although it does spin pretty fast so you might be able to get by using the 80mm version.....)

u/burtnayd · 1 pointr/succulents

if the tub is kept close to the fan, yes. Otherwise it’ll act like a greenhouse (likely regardless of the holes) and cause your beebs to rot. A small fan (something like [this](Thermaltake Mobile Fan 12 External USB Cooling 120mm Fan with One-Touch Retractable USB Power Cable Box for Notebook Laptop Desktop. AF0007 https://www.amazon.com/dp/B002OJN250/ref=cm_sw_r_cp_api_i_TnBXCb7E6G1DR)) could work mounted to the sides of the tub with the cable running out.

I had plants in an cabinet that had cracks between the doors and the sides that I thought would be enough circulation but many many things I kept in there rotted when I was out of town.

u/kneecapper · 1 pointr/Homebrewing

Sorry forgot to link mine.

https://www.amazon.ca/gp/product/B002OJN250/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Yours will work too if you can power it.

u/fwz12345 · 1 pointr/Homebrewing

Couple thoughts: I would definitely go the keezer route. You can get a big chest freezer that can hold 3 kegs plus a CO2 tank for a lot cheaper than you can a mini fridge. I just saw one on the front page of this sub from costco for $100.

I did the whole fridge (full size) to kegerator conversation and it was terrible. I got an old fridge due to budget and it had a hard time keeping everything cold, it looked junky and recently crapped out on me which is why I have a keezer now. I've also read that drilled holes in the fridge can really impact its ability to keep the temp regulated.

You're also going to want to buy an external temp gauge as well as a fan to circulate the cold air.

https://www.amazon.com/gp/product/B011296704/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B002OJN250/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Great video:

https://www.youtube.com/watch?v=zHWy_Vlw3J4

Edit:

I get that budget is important but having a QUALITY kegerator/keezer is more important. Here is why: if you skimp on it, you're going to have a crappy beer drinking experience and you'll be wasting way more money than you saved (not to mention the frustration and embarrassment of serving bad beer to your friends haha I've been there). With that being said, you can definitely make one for $300.

u/wherethefuckismycat · 1 pointr/steak

Boom.

With $20 leftover for that small fan and a thermometer/humidity meter, which cost a total of $10.

u/ruthgrace · 1 pointr/SpaceBuckets

hi, just happened upon this post while searching for other stuff in this subreddit.

If you're interested in cheap quiet USB fans I did a comparison between these in order from loudest to quietest:


bendable stem 2 blade fan -- $6.50 for a 5 pack (unbearably buzzy and really annoying to mount)

IMBAPrice plastic fan -- $7

Generic brand metal USB fan -- $7 (surprisingly quieter than the plastic one)

Summer Fruits plastic Fun Fun Fan -- $11.50 (most quiet by far)


These will all sit nicely in a hole 12cm diameter except for the hard-to-mount bendable stem fan (you can unscrew the stand for the IMBA and metal fan). I can't say exactly what makes a fan quiet, but if it's the number of blades (which it might be based on my study) then the arctic breeze fan you linked might be OK, but it would also be hard to mount.


And you can get a cheapo USB adaptor on Amazon. Don't worry about the higher amperage on the adaptors -- the fan only draws as much as it needs (0.5A is what the Fun Fun Fan says).

u/TheWoodchuck · 1 pointr/vandwellers

A USB powered fan should do the trick nicely. I used to power one off of a solar battery charger when I went tent-camping to keep my tent from getting stuffy in warmer times.

http://www.amazon.com/iMBAPrice-USB-MFAN-USB-Mini-Desktop/dp/B003FO0LG6/ref=sr_1_1?ie=UTF8&qid=1448933899&sr=8-1&keywords=usb+fan

You can run it off of a 12V charger or if you have a laptop like mine that keeps a USB port active for charging, there's that too.

u/Indefinita · 1 pointr/MSILaptops

http://www.toptenreviews.com/computers/peripherals/best-laptop-coolers/

http://www.amazon.com/gp/product/B003FO0LG6 (point it at the laptop, blowing over the surface)

But again, there SHOULD NOT be screen flickering. I'd suggest asking some folks at r/pcmasterrace or r/nvidia about that because it sounds more like a hardware problem...? What temps are you getting to when this starts to happen? I traditionally don't get any higher than 75-90 C at worst, and but my game room is in the basement so it's naturally quite a cool environment. If it's a warm day and I know I'll be gaming for a while I use a laptop cooling pad (Notepal X3) and then diy'd a USB fan-heatsink combo that I put on top of the laptop where the metal gets hot. This normally allows for sub 75 C temps which is more than safe. It's also noisy but I sit away from my laptop (big screen gamer) so that doesn't cause an issue.

u/DrFish96 · 1 pointr/audiophile

Hey guys, I want to get a volume control knob for my speakers, something like this one. The thing is, I want to control the actual volume of the speakers, not the volume from windows. Is there any potentiometer thingy that could stick in the back of my speakers? Or any diy method of doing this? I'm prepared to use a soldering iron if that's necessary.

EDIT: I found this controll knob which looks like it might do the trick, but it's quite ugly and fairly expensive for what it does, are there any better options?

u/xyrgh · 1 pointr/keyboards

What about something like the Griffin Powermate?

Separate but can be used in any setup. I used one of these with my mechanical keyboards for ages before I ended up getting a dedicated headphone amp which already has a volume knob.

u/3D_Scanalyst · 1 pointr/photography
u/eight- · 1 pointr/Trackballs

The best way I found to scroll on the marble (the best meaning, a way which doesn't cause you massive discomfort [something you left mice for trackballs in the first place] the way all the other alternatives do) is https://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

u/a1blank · 1 pointr/buildapc

Something like this? You can get 6 inputs from it: tap, rotate left, rotate right, long push, push + rotate left, push + rotate right.

u/naturalorange · 1 pointr/amateurradio

Grab one of these: Griffin Technology NA16029 PowerMate USB Multimedia Controller https://www.amazon.com/dp/B003VWU2WA/ref=cm_sw_r_cp_api_jnEhzb96GECCM

u/cheebs_ · 1 pointr/MechanicalKeyboards

What you're wanting does make sense and it would be pretty cool if there were more keyboards out there mechanical volume control. However.. You want a smaller keyboard because you live in a small apartment? Unless your apartment is the size of a closet, surely you have a better reason than that.. Full-size keyboards are typically 10cm longer. Is your desk just very small? Perhaps you find it more comfortable? If you really want to save space fuck a ten keyless, just get a 60% and one of those USB volume knobs.

u/valgrid · 1 pointr/MechanicalKeyboards

How about standalone?

Example It probably needs Windows-only software. But i saw a bluetooth controller for Mac as well. There are probably some that send the normal keys.

If you feel like building one: Instructables


(Haven't search long, there should be cheaper options).

u/HaddonH · 1 pointr/monoprice

These sell for more than 30 dollars so there must be a ton of profit that you can get out of this. If you would please.

http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA/ref=sr_1_1?ie=UTF8&qid=1413942893&sr=8-1&keywords=usb+volume+control

Thanks

u/Thetomas · 1 pointr/hotas

Interesting. I saw references to UCR when I was working on getting my warthog throttle working with star citizen.

These are the ones I'm interested in (especially the Griffin one), but they don't say anything about MIDI. Do you think one might be able to be turned into a virtual joystick slider using UCR?

https://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

https://www.amazon.com/DROK-Lossless-Computer-Controller-Adjuster/dp/B01MV411BR

Edit: Actually I just realized the griffin is discontinued and sold out or overpriced most places... I guess the other one is ok too.

u/FFLink · 1 pointr/hotas

Something like this, but it seems expensive...

I would personally just build my own with a Pro Micro or Arduino. Would be a fun project ^^

Edit: Or this?

u/Aquifel · 1 pointr/woweconomy

I bought one of these: http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

It was only bought partially for things like salvage crates but, damn is it useful for them. I bound the key to open the salvage crates to mousewheel up which is also what triggers when you rotate the knob. I just absent-mindedly rotate it while watching TV and, slowly make progress.

u/max-it · 1 pointr/RTLSDR

Yes but this problem was not pointed out in your article that is showing a 0,50$ rotary encoder; the next effort is to find a cheap solution with an encoder with no detents. For the optical encoder in the link, it cost more than buying a PowerMate

The cheapest optical encoder i could find is this one but the minimum power supply is 5VDC and i don't know if it can be powered directly from the USB as i want to connect it to a mouse to replace the scroll wheel encoder.

u/technomancy · 1 pointr/MechanicalKeyboards

Same, but I've found that analog input is actually pretty nice for scrolling around on web pages. So I got one of these: http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA/

u/zip_000 · 1 pointr/Libraries

One thought that just occurs to me:
You could script one of these:
http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA

to switch between display modes, sort of how this suggests:
http://stackoverflow.com/questions/12329103/way-to-change-windows-7-monitors-settings-via-script

So to switch between to mirrored mode, press the button and it calls DisplaySwitch.exe /clone

To switch back to just this display, press the button and it calls DisplaySwitch.exe /internal

u/SearingPhoenix · 1 pointr/pcmasterrace

How about just physical knobs for a ton of different things

Yeah, that exists. I hear it's actually pretty awesome and has some good uses in AV editing and whatnot (scrub timelines in Premiere/Audition/Ableton, contact sheets in Lightroom, etc.)

There are also more specialty devices such as the Contour (Basically the same, but with programmable buttons) or 3 dimensional mice which have a niche market in CAD applications.

u/ThisFaceLeftBlank · 1 pointr/gaming

Hah! The 2 keyboards I kept were G-15's! I bought the first model, then a lightning strike killed my computer and half the LED's in the keyboard, so I got a V2. I lost a little paint from the v1- the spacebar started losing paint, but that's it.

Eventually, I took apart the v1 and soldered in new LED's - all green. Unfortunately, I ripped the ribbon cable to the LCD, a common accident with G15 disassembly. I found them VERY complicated to disassemble/assemble. They're the worst thing I've ever taken apart and successfully put back together. So many screws, so many sizes, the delicate, painfully short LCD cable, etc. Anyway, one day a friend dumped a cola into his V1, and so donated his LCD screen for my rebuild, and I finally got it all together and working again!

Sad thing is: except for the lack of a volume knob, I kind of prefer the V2. Just feels better to me. I've thought of buying a Griffin KNOB for my PC, just to have a big ole dedicated volume knob. If it were better supported, or someone had hacked it by now, I'd probably already have one.

u/larkatarks · 1 pointr/Lightroom

I've been looking at getting this thing, the reviews suggest it would work with Premiere and stuff, so it might also work with Lightroom.

http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA/ref=sr_1_1?ie=UTF8&qid=1450299886&sr=8-1&keywords=griffin+media+controller

But, it might not really be what you're looking for.

u/ssmy · 1 pointr/hardware

Griffin Powermate can act as a big volume knob.

I've always wanted one, might get one soon. I think they're like $10 used if you can find one.

u/xodlike · 1 pointr/buildapc

There is no 'big deal'. Some people, me included, just love the:

Tactile feedback

Simple design, no extra keys, media keys, volume control. I never used any of the media keys on previous keyboards, and always thought they crowded a design of a keyboard, while offering no functionality (for me.)

The USB hub is a powered one, since the keyboard uses 2 USB cables. I use one port to get the full length of my G500 cable, and the other one with a Griffin Powermate , makes for a really convenient setup.

Only warning I'd give to potential buyers, is that if you are often using VoIP applications, make sure your keyboard is a decent distance away from your webcam/microphone. If you go silent, some VoIP applications pick up the keyboard as the only valid noise, amplifies it, etc. Drives some of my friends nuts.

u/Epicmanman · 1 pointr/computers

I guess your looking for something like this

Contour Shuttle Xpress
/
US Amazon

Or something a bit more simple?
/
US Amazon

I wasn't sure if your US or UK or somewhere else but there some examples I think should work for your purpose.

u/NoBulletsLeft · 1 pointr/arduino

A bunch of really nice looking options right here

u/Curtisbeef · 1 pointr/hardware

Just get this:
Griffin Powermate

I use mine alot and love it. Software is pretty customization too.

u/zimmund · 1 pointr/MechanicalKeyboards

Have you considered using a Powermate? it's a USB knob which allows you to adjust volume (or whatever you want).

u/W1RELESS · 1 pointr/userexperience

If you are considering buying one, definitely get the wired one. I had a bluetooth one and returned it because it wasn't worth the hassle. That being said, it is nice as a wireless volume control if your computer isn't next to your bed.

I mainly use mine in Ableton Live for chopping samples. (not typically what you'd use it for, but that just goes to show you how diverse the functionality can be).

edit: The wired one is also $22 cheaper: wired power mate

u/B4K5c7N · 1 pointr/Surface

I have the pro 4 8gb i7 and I play a lot of games on mine. Lego games play the best, especially both of the Harry Potter Lego games. On those, I get very high frame rates at max settings, max resolution. I also have played Tomb Raider 2013 at 1080p on ultra settings (ultra for detail and textures but the rest on high) and got low to mid 20s fps. However I also use a USB fan that I got off Amazon and that gives me double frame rates so I can play that game even in the mid 40s fps with those settings. The fan also allows me to get in the low 20s at 720p for Rise of the Tomb Raider.

Assassins Creed games I also play. I don't play #2 or #3 at max resolution because there is black boxing, but I do play those at 1080p and they are playable. Black Flag I play as well but at 720p. Mind you on these games I am not getting super high frame rates, but at least in the 20s-30s which is fine for me and basically similar to what you would get on a gaming console.

When you get your device, make sure to get this fan from Amazon to help with your gaming. You will get about twice the performance. It's also helpful just in general to keep the device extra cool and have sustained performance for longer periods of time.

https://www.amazon.com/Arctic-ABACO-BZG00-010000-ARCTIC-Breeze-Mobile/dp/B003XN24GY

u/MrEpixauce · 1 pointr/Surface

Please do, my solution to the heat throttling has always been an external fan, with that I am able to achieve pretty close to maximum performance. Though undervolting would mean I wouldn't have to carry around a usb dock and fan for gaming away from home...

u/BitcoinAllBot · 1 pointr/BitcoinAll



Author: SteelbiteGaming

Content:

>I'm heavily considering taking up BTC mining as a hobby. I know that this will most likely never break even, but it'd be a fun venture into mining.

>Budget of $100


> USB powered BTC miner
> USB powered fan
> 3 port USB hub


>What do you guys think for a budget of $100? Remember that this is a hobby and not for profit.

>Thanks for any and all suggestions!

u/Grummond · 1 pointr/WorldofTanks

Before buying a cooling platform, test if it actually makes any difference by pointing a box fan right towards it. Lift it up a little so the air can flow freely under the bottom and cool the area most likely to get hot (the CPU/GPU area).

You could also get something like this.

Here's someone getting a 62% performance improvement (FPS) on a Surface Pro 3:

https://www.youtube.com/watch?v=uC8rCeDMqFw

u/mdt2 · 1 pointr/Vive

Thanks OP. I'm currently using the arctic breeze one.

https://www.amazon.co.uk/ARCTIC-Breeze-Mobile-Everywhere-Notebooks/dp/B003XN24GY

Top tip - with some careful dremeling you can cut out the corner of the strap attachment so you can re-fit the headset band with the fan still attached.

See -> http://imgur.com/a/vmpw5

u/TheBlueSpirit7 · 1 pointr/MechanicalKeyboards
u/Hopper2004 · 1 pointr/Surface

For gaming, you should try lowering the resolution. It helps a lot. Also, if you're considering a USB fan, I have this one and highly recommend it.
It's decently quiet, it helps, and it's very affordable. If you want, you could shell out a few more dollars and get one with a base, that could come in handy.

For the audio de-sync, I have the exact same issue on SP3!! I have no idea what causes it. It's very frustrating!

No idea what that windows credentials is. Never seen it.

Unrelated note: How'd you get OBS to record/stream the screen properly? Whenever I try to use it, OBS only shows the upper left corner of the screen, no mater what settings I fiddle with.

u/shattasma · 1 pointr/SurfaceGaming

i got a ~10$ usb fan from amazon. one with a bendy neck so you can point it directly at the back of surface.

its cheap, effective, hardly takes up space and makes a big difference in frame-rate. i can play hours without stutters, while before my surface would go ~20min before having to undervolt and cool down.

found the exact one i bought
https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_api_i_AQ5qDbRDK1RY4

u/nxlinc · 1 pointr/awardtravel

That's my plan, a while back someone recommended a small USB powered fan and I'm currently trying to decide if that will be sufficient or if I should go for a bigger one.

u/2ndGapFromPinky · 1 pointr/LifeProTips

Here's what I did (sounds super weird but it works) I bought an on-the-go phone charger 3000 MAH < along with a 6 port USB hub and 6 USB fans that can be stood up on their own. Works like a charm and the fans are surprisingly powerful and last about day and I plug the battery in to charge overnight. Products used:
Fans: https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_apa_R72FxbHH08D17

Battery pack: https://www.amazon.com/dp/B00MQSMEEE/ref=cm_sw_r_cp_apa_X82FxbKYJHR4M

USB Hub: https://www.amazon.com/dp/B015O4Y1YM/ref=cm_sw_r_cp_apa_G.2Fxb0WQ3Z6D

u/immortalreddit · 1 pointr/Surface

I know it may look silly, but I've read a few people suggest using a USB powered fan like this and pointing it at the back of the SP3 where it gets hottest:

https://smile.amazon.com/ARCTIC-USB-Powered-Portable-Solution-Gooseneck/dp/B003XN24GY/ref=sr_1_3?ie=UTF8&qid=1467920598&sr=8-3&keywords=usb+fan

u/tmotom · 1 pointr/Bitcoin

Ohh, jeez, you can buy the Bitmain Antminer here.

The smaller ones in between the Antminers are these, but for $10 more, you can get like 5 times the Mh/s with the Antminers. The Antminers are a lot more worth it; I just wanted something to fill in my empty spaces.

The cooling fan is this, but I've got a bigger clamp fan blowing on it so the whole rig doesn't burn my house down. Though, I haven't had much problem with heat. The cooling fan does enough to keep them cool, but when I had no cooling fan, it was hot enough to burn my skin and I found that out the hard way. The clamp fan is just there for insurance.

The Pi is gonna need a 4GB SD card, so make sure you've got a reader for that.

And you're correct. This is the least profitable thing you can do, my setup cost me roughly $150 a month and a half ago, and they've made me $2 worth of Bitcoins (.004 Bitcoin) that haven't even been transferred to me because Slush's pool send threshold is .01 Bitcoin. Though, the whole setup barely puts any strain on my electric bill.

It was fun putting it together and making it work, and it's a great conversation starter, but it has yet to prove me any monetary worth at all. Maybe I can buy something cheap on Overstock in a couple months, or I'll get really really lucky and mine a block.

u/mrpink57 · 1 pointr/WireGuard

As for heat I use a 3b+ as a seedbox and it does generally just get hot. I use some heatsinks and a standard black pi case. But it is always running warm, so I can only imagine the RPi 4.

I also run a 8devices Jalapeno as my Openwrt router that runs Wireguard (with NEON support). For cooling I use artic cool fan connected to a usb port and it does a really good job and is super quiet. Plus I can bend it pretty far so it does not sit too high.

u/jcar117 · 1 pointr/Surface

I use this fan for my Surface Pro (2017). Plug it in, flex it so air blows into the small vent just above the USB port. Helps reduce throttling but takes up the USB port.

ARCTIC Breeze Mobile - Mini USB Desktop Fan with Flexible Neck I Portable Desk Fan for Home, Office I Silent USB Fan I Fan Speed 1700 RPM - White https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_apa_i_DmJ3CbSR5V898

u/sillybandland · 1 pointr/techsupportgore

Not a dead-on answer but, maybe something like this? It would certainly look better

u/TheHairCut · 1 pointr/OkCupid
u/gregofcanada84 · 1 pointr/sysadmin

I'd say put a heat sink on, although in that temperature I'm sure it won't do much. Making backups is a great idea. If all else fails, plug one of these in the USB port and aim it at the Pi: https://www.amazon.com/ARCTIC-Breeze-Mobile-Flexible-Adjustable/dp/B003XN24GY/ref=sr_1_3/145-9324055-0476619?ie=UTF8&qid=1499268247&sr=8-3&keywords=usb+fan

u/Suspendedskinnykid · 1 pointr/camping

Get a hammock but if not then plan B. Get an external battery bank. Get a couple of these. People say they move air pretty well.

u/DeathRebirth · 1 pointr/Surface

It's unusual to me that it's so binary... usually the throttling is at least a bit gradual and not so strong.

Still you could always try something like this (which I had for my SP4 I7).

https://www.amazon.com/ARCTIC-Breeze-Mobile-Flexible-Portable/dp/B003XN24GY/ref=sr_1_5?keywords=usb+fan&qid=1571829997&sr=8-5

It probably won't be identical to the I7's fan, but it might make up most of the difference. That's partially just the reality of an ultra portable with no fan, but a decent on die GPU.

u/stupac62 · 1 pointr/DataHoarder
u/ntxawg · 1 pointr/Surface

if heat is the issue, then https://www.amazon.com/ARCTIC-Breeze-Mobile-Flexible-Adjustable/dp/B003XN24GY get this and blow it on the back of your surface as a temp work around?

u/NerdGirl5 · 1 pointr/Surface

I agree with mlbobs first two points, second two points are up to you. If you are gaming, you might want to get this. http://www.amazon.com/dp/B003XN24GY/ref=cm_sw_su_dp

Point it at the top right of the back of the SP4, or top left if you are looking at the back.

I wouldn't bother with a screen protector if you use the type cover. But to answer your question, the pen will work fine with it. The pen resistance or feel will be different and the touch feel will be different, and the reflections from the screen will be different.

Have you thought about back ups? External monitor? Adaptor to use TV? Bigger speakers, headphones?

u/ntgcmc · 1 pointr/coinmagi

I use this fan https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_cp_api_x6QTAb9Z63HAV
My usb tester shows it pulling between 0.20amps

u/FLAMESOFURY · 1 pointr/gpdwin

I sometimes use a couple of different USB fans:

https://www.amazon.com.au/ARCTIC-Breeze-Mobile-Flexible-Portable/dp/B003XN24GY/ref=asc_df_B003XN24GY/?tag=googleshopmob-22&linkCode=df0&hvadid=341792025491&hvpos=1o1&hvnetw=g&hvrand=2383948075395915345&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1000286&hvtargid=pla-441796032378&psc=1 - I use this one if I'm using the GPD on a external screen or handheld WHILE it's charging (the fan uses a bit of power so expect 1-1.5 HR battery life with fan on)

https://www.ebay.com.au/i/262358644471?chn=ps&norover=1&mkevt=1&mkrid=705-139619-5960-0&mkcid=2&itemid=262358644471&targetid=752504740784&device=m&mktype=pla&googleloc=1000286&poi=&campaignid=7412621934&mkgroupid=80280725225&rlsatarget=aud-693796249881:pla-752504740784&abcId=1139426&merchantid=116570866&gclid=EAIaIQobChMIqabvuPWI5gIVkTUrCh08qwT4EAQYBSABEgL4mfD_BwE - Or I use this one when I'm exclusively on battery power as it has 2 mode settings, low and high and while on Low I can still maintain good battery life.

The first fan is longer and can extend and bend directly over the intake which is why it's a great little cooling gadget, really helps with the temps (at least 3-5 degrees Celsius difference - depending on game).

The second Xiaomi fan is shorter but the dual mode makes it ideal for battery use. In both cases, there is a risk of your fingers getting jammed up in the blades but if you bend the fans properly, you should be good.

u/iHelp101 · 1 pointr/perktv

Bloating occurs mainly due to heat. If you touch your devices are they warm? I know some people use USB fans (Linked one I have seen posted below). To my knowledge none of these devices will allow you to run without a battery. When a battery bloats it is a warning that things are going wrong.

If you continue to ignore the battery bloating you are going to have an issue. Batteries bloat because gases are released and the battery contained them (In return it bloats). Eventually that protection may fail.
___
https://www.amazon.com/dp/B003XN24GY/

u/masfenix · 1 pointr/Surface

This subreddit is highly fond of the arctic breeze:

http://www.amazon.ca/ARCTIC-USB-Powered-Portable-Cooling-Solution/dp/B003XN24GY/

It actually does pretty well. I can be programming/running code/running matlab and it'll hover around 45 - 50, maybe 60 if I go at it. It's just not covered though so if it hits your surface, it will leave a scratch. its a possibility if you use an external usb hub and move the surface around

u/Nyjn · 1 pointr/Surface

I remember reading somewhere that the outside temperature affects the SP3 negatively, I'll try and find it tomorrow if I get a chance.

The surface starts the fan/throttles at around 70°C. Was this in chrome? Does the temperature rise the same in IE/FF?

You could also consider buying a small USB fan and point it at the top right corner of the device, it'll help it stay cool. Something like this

u/Edwin320 · 1 pointr/Surface

I figured, lets say you want to play civilization or xcom..or something a bit more demanding..to be able to max out performance plus using this http://www.amazon.com/ARCTIC-USB-Powered-Portable-Cooling-Solution/dp/B003XN24GY/ref=sr_1_1?ie=UTF8&qid=1426100862&sr=8-1&keywords=arctic+fan+usb would make it decent experience with less throttling

u/Pukit · 1 pointr/dogemining

There are two artic breeze usb fans plugged into the usb hub. http://www.amazon.co.uk/gp/aw/d/B003XN24GY?pc_redir=1409942669&robot_redir=1 and the two 80mm fans are just standard silent 80mm three pin fans that I ripped the fan speed sensor wire out of and swapped the other two wires about in the plug to make work. The whole thing runs completely silently.

u/theinfamousj · 1 pointr/camping

Nonconventional?

The knife on this is pretty amazing, the spork part is pure garbage.

Cheaper alternative for an ultra light wind shirt.

I can build a one-match fire, and I can absolutely pay attention to the fibers that I dry in my dryer so that I only bring along cotton lint. Or I can say something that rhymes with bucket and simply bring along some of these.

One of these + an external battery for recharging your cell phone = a breeze all night long.

I use lengths of this to insulate the wire handles of my cookpots so I don't have to bring a pot grab or separate pot holder. Remove the wire handle, slide the tubing over, replace the wire handle. So long as the handle doesn't go directly on a flame, the 400F limit of the silicone will do you.

u/Tchnclly · 1 pointr/Surface

SP3 "mod" Buy a gooseneck USB fan. Plug it into the USB port and point it at the hot-spot on the back of the tablet where the proc is.

The ARCTIC Breeze here is my favorite out of a few I tried:
http://www.amazon.com/gp/product/B003XN24GY?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00

u/MoldyCat · 1 pointr/Switch

I too just bought a switch the other day (finally found one).

Here is what I have bought (so far):

[A Stand]
(https://www.amazon.com/gp/product/B01LZAYH58/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1) needed? Maybe not, but I won't always have my screen with me to tote around.

Charge grip The grip that currently comes with the switch does not charge. I am ok with the switch's controllers, but do not like the idea of sliding it down on the screen every time they needed charged. I can't see me getting a "pro controller" but that is an option.

[This cable] (https://www.amazon.com/gp/product/B073JJB3DB/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) I played all day Sunday, and noticed the switch was over heating. This cable allows for the switch not need to dock. Needed? No, but teaming this up with the stand and this means I should not have over heating issues.

And then I got these grips because the match my controllers, and I wanted that "back" hump for better grip.

Why grips and charge grip? Well I modded the charge grip already, are removed the plastic built-around.

I also bought a screen protector, the tampered glass one, for the screen, but I got that at a store.


To many case options out there, I got lucky a found a Zelda BotW special edition when they came out, so I have that. As for mobile charging, no help there.

u/Randrage · 1 pointr/Surface
u/bonestamp · 1 pointr/BitcoinMining

> Do you have one of those little fans as well?

This fan works really well: http://amzn.com/B003XN24GY

I also have an 80mm case fan that moves a lot less air but seems to be just about as effective. With no fan, the block erupters get hot. With a small fan, they seem to run very cool.

I also have very low errors compared to what I see in a lot of screenshots (0.2%), not sure if that's related to cooling or not though.

u/WrathRE · 1 pointr/AskBattlestations

If you can add in an extra 2 bucks or so, each of these as USB back lighting for your monitor would be awesome:

http://www.amazon.com/Antec-Accent-Lighting-Blue-USB-powered/dp/B007TG5ECW/ref=sr_1_1?ie=UTF8&qid=1411484734&sr=8-1&keywords=led+strip+usb

u/Dragonstomp · 1 pointr/battlestations

Didn't really use a guide. Just bought a pair of Antec Advance Accent Lighting Blue USB-powered 6 LED Strip's off amazon. :)

http://www.amazon.com/gp/product/B007TG5ECW/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

They have double sided tape and attach to the back of whatever you want to attach em to. USB powered so nothing to wire up either.

u/ChrisSwires · 1 pointr/vinyl

They're just two of these plugged into a powered usb hub.

u/shoryaku · 1 pointr/battlestations

which ones? Used these and this for my blue monitor ones but the consoles have color change strips from Ikea (this one).

u/megamanxoxo · 1 pointr/geek

Where can I get one? This would be a dope as a standalone desk or wall unit too.. especially if I can control the brightness. Also, how loud is it?

EDIT: Found it here

u/johnc94 · 1 pointr/pcmasterrace

Little late and I don't know if it's the same one but here, USB LED Fan Clock.

edit: thanks for the gold :)

u/dottiestzulu987 · 1 pointr/RandomActsOfGaming

My LED clock fan is one of favorite things that I use. It's a fan that has LED's on it that light up when you turn it on. Then those lights turn into a fan. It looks really cool in person and is one of my favorite Christmas gifts

Edit: link to the fan

Edit 2: link to my steam profile

u/komala_ak · 1 pointr/hometheater

I heard the same thing which is why I bought these fans from Amazon for a good price. Super quiet and keep it really cool. I have to keep it on low bc it was too cold with it higher.

u/Wambo010 · 1 pointr/hometheater

+1 AC Infinity. They have a variety of 120mm kits that come with or without mounting plates, as well as optional controllers. They are USB powered but can be powered via a wall outlet adapter. I've been using them on my Denon for a while and they are silent.

u/Arab81253 · 1 pointr/PS4

Link, I keep them plugged onto the front of my PS4, I bought one of those USB extender things to give me a few more ports. They're really great, have a few speeds and run very quiet. I keep my PS4 in an entertainment center thing and have one fan pulling in cool air to push it through the system by the front and the other one is set up to pull the hot air out the back. I haven't heard the PS4's fan turn on since I bought these in September. They're great too, between my gaming and my wife's Netflix and Hulu addictions my PS4 spends a ton of time being on and these fans are going to whole time. Sorry for the lengthy impromptu review, I just really like this product.

u/Morgii · 1 pointr/zec
u/ripeart · 1 pointr/hometheater

You might consider interspersing your amps among the components and placing some quiet fans like these strategically. Sort of like this:

_
component

amp

component

component

amp


Off topic question but just curious why you need your VOIP phones on when there is no power?

u/emoney23 · 1 pointr/xboxone

With more graphically demanding games the fan will need to kick in to keep the system cool especially with RDR2. If you have your Xbox in a closed entertainment center that has the back blocked so air can't go out like mine, I'd suggest purchasing some external fans like these: https://www.amazon.com/gp/product/B00JLV4BWC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Before when playing RDR2 my fans would kick in so much that it was almost hard to here the audio from the game. Since using these the Xbox fans barely make any noise.

u/Unlucky_Situation · 1 pointr/PS4

Rather than a box fan I use a USB powered fan that can plug into any device with usb ports. My TV has USB inputs, so that's where the fan stays plugged in rather than taking up my Ps4 or Xbox USB slots. Example

u/anotherjustin85 · 1 pointr/fleshlight

Hey...sorry for the delay.

I use one like this, it's a little USB-based fan that I plug into a USB fob:
https://www.amazon.com/OPOLAR-F401-Personal-Operation-Compatibility/dp/B00WM7TRTY/ref=sr_1_6?keywords=usb+fan&qid=1551383808&s=gateway&sr=8-6

I have several different sleeves, the ones that dry the fastest (and that I use the most) are the Mini-Lotus and the Flight Pilot. With the fan, the Mini Lotus is usually dry at least within an hour depending on humidity. The Flight Pilot can sometimes be dry within 30 minutes.

u/foot-long · 1 pointr/videos

he meant the link to 1:07 on the video

i'm gonna take a wild ass guess and say it's this one, the #1 best seller on amazon

http://www.amazon.com/OPOLAR-Personal-Design-Operation-Compatibility/dp/B00WM7TRTY

u/Invisible_Villain · 1 pointr/osugame

Bro I bought one of these fans and it’s been a life saver...

u/chaoticbear · 1 pointr/Bowling

I use a rosin bag as well as one of these (different brand, but same Chinese generic product). USB rechargeable, but it takes the same batteries as I have laying everywhere for ecigarettes.

u/monstaface · 1 pointr/ElectricForest

I put a canopy over my tent too. Getting Usb Fans with battery packs to create some airflow. Open your doors or any vents.

Something like this: https://www.amazon.com/Efluky-Speeds-Rechargeable-Portable-4-5-Inch/dp/B00Y1VZ00E/ref=sr_1_1?ie=UTF8&qid=1493298278&sr=8-1-spons&keywords=usb+fan&psc=1

u/Wild__Gringo · 1 pointr/Damnthatsinteresting

Costs ~15 on Amazon link

u/Delanakatrella · 1 pointr/TheSilphRoad

Our kit consists of this portable fan that runs off USB power/a backup battery, and on very very hot day we usually carry along a cooler with 3-4 pre-frozen/cold ice packs to set the phones on to cool them rapidly. So far the fan is doing the trick at keeping things cool enough to operate.

u/Humpsel · 1 pointr/daydream

It was kinda a joke but they do exist :P don't know about the combination of such a thing with the Daydream headset, but have a look at this fan or heat pad

u/Tonio50 · 1 pointr/GearVR

I think if you use it in a warm room it can heat up fast. I had the overheating recently when staying in a hotel. Nothing since apart from heavy use.
I got one of these
https://www.amazon.com/gp/product/B01ESFZY76/ref=od_aui_detailpages00?ie=UTF8&psc=1

It has a very powerful fan and sticks onto the back of your phone...I haven't had to use it yet lol....

u/some_kid6 · 1 pointr/NFA

You're gonna need 3 things:

u/squakmix · 1 pointr/gifs

You could probably get away with a [cheap limited version that has one low-res LED strip] (https://www.amazon.com/gp/aw/d/B01LQB85XU) instead.

u/El_Smakk · 1 pointr/gadgets

I'm looking for something like this, but actually programmable, as in writing my own code to send instructions to the fan, or load custom software to the fan, not just 'programming' in lines of text to cycle through. I have a very hard time googling it, since all of them are called 'programmable'.

u/__matta · 1 pointr/OffGrid

I really like coffee so a french press and this little hand grinder make me really happy every morning: https://www.amazon.com/Hario-Ceramic-Coffee-Mill-Mini-Slim/dp/B01GPMH590

It's really hot and I don't have enough power for AC so I like this little usb rechargeable fan: https://www.amazon.com/OPOLAR-Powered-Battery-Enhanced-Personal/dp/B06WGLGJ94

When it's cold I'm really happy I have a wood stove. Not just for heat but also to stop it from getting too damp inside, let me dry my boots, and give me an easy way to make hot water for tea.

Before I setup pressure water I used the Whale Gusher Galley pump and it always worked really well. I'm definitely glad I upgraded to pressure water though (I'm using the seaflo 33 series 12v pump now).

Oh and my USB rechargeable electric toothbrush: https://www.amazon.com/Electric-Toothbrush-Rechargeable-Optional-Fairywill/dp/B06VWD8NY3

u/beninato · 1 pointr/UWMadison

You can buy your own security key and register it if you really need one. There are plenty on Amazon for around $20, like this. Make sure you don't pay extra for one with NFC if you don't have a phone.

Or have a friend who doesn't want a token/fob give you their free one.

u/brennanfee · 1 pointr/Bitwarden

> Would it still be just as (if not just a little less) secure to put your TOTP's on Bitwarden, and use a separate TOTP for actually logging into Bitwarden stored only on your phone on, say, Aegis Authenticator?

Sure, that would work too. Or using a service such as Duo or something. I think a key (YubiKey) is your best bet for auth into Bitwarden. But the other methods would be fine as well.

One of the things you should consider is the loss of your phone. What happens in that case and make sure you have a way to recover. You could lose your phone, it could become "compromised", or even just break.

Lastly, I would say though that YubiKeys aren't as expensive as you might think. Here is one on Amazon for $20. https://www.amazon.com/Yubico-Security-Key-USB-Authentication/dp/B07BYSB7FK

u/wanderingbilby · 1 pointr/techsupport

It's non-trivial to the point of requiring physical modification of the unit and several additional components.

I suggest either getting a battery bank that already has an inverter or get a fan that connects to USB. Heck, there are fans with batteries that charge from USB.

u/domsch1988 · 1 pointr/yubikey

From this site: https://www.yubico.com/works-with-yubikey/catalog/linux/ It looks like the "cheapo" Security key (Amazon Link) would do that, correct? Apart from NFC, what are the other downsides of that one?

u/buster2222 · 1 pointr/pics

Why not a cover simular to a cooling fan,something like this made from a material that doesn't weigh much?, https://www.amazon.com/gp/product/B06WGLGJ94?ie=UTF8&tag=bustle5139-20&camp=1789&linkCode=xm2&creativeASIN=B06WGLGJ94

u/finallyrageisabitch · 1 pointr/FortNiteMobile

This bad boy right here will do a pretty good job at keeping your phone cool. i feel like without these there isn't much that can be done to keep your phone from getting hot, definitely a necessity for me since if the phone gets even the slightest bit hot the screen dims to like 10% and i can't deal with that lmao

u/mattbehnken · 1 pointr/GooglePixel

VIVISKY Portable Phone Fan 3 in 1 Phone Cooling Fan Power Bank Stand Holder Suitable for Any Smart Phone Tablet(Black) https://www.amazon.com/dp/B071VH4CX8/ref=cm_sw_r_sms_apa_i_ICQpDb7PCT7SF

u/3johny3 · 1 pointr/xboxone

you can remedy the situation by buying a cheap usb fan at your favorite online retailer. newegg, amazon, monoprice all have them. i run these fans by even my most ventilated xboxes, router, computer. etc.

​

for example

https://www.amazon.com/ELUTENG-Ventilator-Compatible-Receiver-Playstation/dp/B071JB9WYB/ref=sr_1_12?keywords=usb+fan&qid=1572215162&refinements=p_85%3A2470955011&rnid=2470954011&rps=1&sr=8-12

u/jaybaumphoto · 0 pointsr/PS4Pro

2 sets of these: Coolerguys Dual 80mm USB Cooling Fans https://www.amazon.com/dp/B002NVC1DS/ref=cm_sw_r_cp_api_hRMmybR1MDY16

u/jessek · 0 pointsr/Cyberpunk
u/ripster55 · 0 pointsr/MechanicalKeyboards

http://www.amazon.com/Griffin-Technology-NA16029-Multimedia-Controller/dp/B003VWU2WA


Of course you COULD simply use AutoHotkey, the Mac/Linux equivalent, or this Ghetto Mod.
http://www.overclock.net/t/806019/how-do-i-make-a-usb-volume-knob

But where is the fun in that?

u/pcgate · 0 pointsr/ProductPorn

OnetwoUSB LED Clock Fan with Real Time Display Function,USB CLOCK FAN,Silver,1 year warranty https://www.amazon.com/dp/B010M9KRHO/ref=cm_sw_r_cp_apa_B5w-Bb3G84T8G


u/DocNYz · -1 pointsr/xboxone

I agree, and there's no way a ~$7 USB fan from amazon could hurt ;)

I have several of these they're very versatile and great for the price!

ARCTIC Breeze Mobile USB-Powered 92mm Portable Fan, Portable Cooling Solution, Quiet Fan - White https://www.amazon.com/dp/B003XN24GY/ref=cm_sw_r_awd_bpQbub19C7ZA2

u/Jisifus · -10 pointsr/techsupportmacgyver

www.amazon.com/ARCTIC-USB-Powered-Portable-Cooling-Solution/dp/B003XN24GY