Top products from r/Austinmotorcycles
We found 11 product mentions on r/Austinmotorcycles. We ranked the 11 resulting products by number of redditors who mentioned them. Here are the top 20.
1. IRWIN Screw Extractor Set, Hex Head, Multi-Spline, 25-Piece (53227)
Sentiment score: -1
Number of reviews: 1
VERSATILE: Remove broken studs, bolts, socket screws and fittings for high torque applicationsGRIPPING POWER: Aggressive left hand spiral design for extra gripping powerEASY-OUT STYLE: Spiral flutes embed themselves to increase grip as resistance increasesETCHED SIZES: Extractor size and recommended...
2. Escort Direct Wire SmartCord (Red Light)
Sentiment score: 0
Number of reviews: 1
In-dash power cord for radar and laser detectorsIncludes power-on indicator, LED alert for radar and laser, and mute buttonInstalls in vehicle fuse panel and mounts within driver's reachCompatible with Passport 9500i, 8500 X50, Solo S2, and Passport 7500S modelsAlso fits earlier Passport 8500, 7500,...
3. PanaVise 209 Vacuum Base Pv Jr.
Sentiment score: 1
Number of reviews: 1
Attaches securely to any smooth, flat, non-porous surfaceFeatures an easy-to-use single knob which, controls head movement through 3-planes: 210 Degree Tilt, 360 Turn and 360 RotationFine/coarse adjusting knob controls jaw pressure for delicate workGrooved jaws are excellent for holding small object...
4. FloTool 11849MI Dispos-Oil Recycle Jug
Sentiment score: -1
Number of reviews: 1
12 quart (3 gallon) oil recycling canEasily transport container to your local recycling centerFeatures molded handle for easy carrying and pouring purposesBig mouth opening for easy pouring purposesResistant to chemicals & solvents
5. Goof Off FG659 Heavy Duty Remover, Trigger Spray, 22-Ounce
Sentiment score: 0
Number of reviews: 1
22 OZ Goof Off Heavy Duty RemoverWater Based Formula Removes Dried Latex Paint From All MetalsGlassBrickWood
6. Ergodyne Chill-Its 6665 Evaporative Cooling Vest - Gray, Large
Sentiment score: 1
Number of reviews: 1
V-neck with zipper closureQuilted nylon outer layerActivated, polymer-embedded fabric insideWater-repellent liner and black cotton-poly elastic trimLightweight, durable, and washableSoak in water 2-5 minutes to activateRemains hydrated for up to 4 hours
7. Frogg Toggs Chilly Pad Cooling Towel, Sky Blue, Size 33" x 13"
Sentiment score: 1
Number of reviews: 1
Cools twice as long as microfiber cooling towels while enduring outdoor heat and/or high levels of physical activitySoaking the towel in hot or cold water will allow Chilly Pad to activate quickly and cool up to 30 degrees below ambient air tempConstructed from Frogg Toggs’ exclusive, hyper-evapor...
8. K1 Race Gear 701430 Black Cotton Full Face Head Socks - Balaclava
Sentiment score: 1
Number of reviews: 1
Keep your helmet cleanMachine washable100 percent cotton absorbs moistureReverse stitch for maximum comfort
9. TANK SEALER FOR HARLEY & CUSTOM AUTOMOTIVE TRACTOR ALL GAS TANKS
Sentiment score: 0
Number of reviews: 1
Premium Gas Tank Sealer, Stays Flexible, Will never crack or peel offResistant to Alcohol & Most Fuel AdditivesCovers Rust - Seals old rust in and prevents future rustingBright Color - Coverage is easily visibleSeals Leaks - Gets the multitude of pin-holes you can't find
10. KTM Touring Windscreen 2015-2016 390 Duke 90108965000
Sentiment score: 1
Number of reviews: 1
We recommend the touring windscreen for longer trips.Provides improved protection from the wind and relieves the upper body
11. CLOVER 3 in 1 Nylon Extension Arm Set for GoPro Hero 5 / 4 / 3+ / 3 / 2 / 1 --Black
Sentiment score: 0
Number of reviews: 1
Compatibility for GoPro Hero 4, GoPro Hero 3+, GoPro Hero 3, GoPro Hero 2, GoPro Hero 1Mount Length 108mm / 88mm / 68mmEasily secure your camera to connect 3 different height extension arm at the same time as you record to a different angle by the momentsBrand new and high quality extension arm set3...
Riding in temps above 100degs just seems unnatural.(doesn't stop me from riding)
I tell my cage dwelling friends it's like driving with someone holding a hair drier in front of you.
I've been thinking about getting one of the cooling vests to try out this summer.
This one has good reviews and is priced pretty fair.
http://www.amazon.com/Chill-Its-6665-Evaporative-Cooling-Vest/dp/B002BDU3QA/ref=sr_1_1?ie=UTF8&qid=1395229902&sr=8-1&keywords=motorcycle+cooling+vest
Consider getting one of these Frogg Togg Chilly Pads. I used one last summer riding through the arizona desert, and they make ALL the difference in the world, I promise. Also, the Frogg Togg brand towels are vastly superior to the knock-off brands. My dad and brother each had some no-name brand cooling towels, and theirs were always bone dry while mine was still moist and cool.
I rode a naked FZ6 as my first bike, and yes, the buffeting is always an issue. That said, the addition of even a small windscreen does help a lot to keep the wind off of your chest. Something like this. Helmets are a least a little aerodynamic. Chests are not.
After you complete the MSF course, almost all local places (i.e. woods) will give you a gear discount (5-15%) if you bring your completion certificate in. Depending on how much you were planning on spending on your helmet, this can be a significant savings, and worth wearing a 'used' helmet for a few days. You will be so focused on developing your motorcycle skills you will completely forget how many people have used the helmet - it really isnt that bad.
If you are really OCD about germs, you can get a headsock, but they arent very fun in hot weather.
As far as boots, anything will work. The steel toe shouldn't get in the way. Shifting definitely rubs the top of the toe area on boots, so dont wear anything you dont want scuffed up.
Ever considered a small suction base vise? If you have a flat & clean enough surface on your tank, they work well and are pretty versatile on angles. I don't use mine for that but I use it for soldering all the time, and have thrown it on my tank to hold tools or brake fluid reservoirs and it's never fallen off.
I'm looking to de rust a GS-850 tank and picked up some of this as it is said to be non acidic and biodegradable, I'll try it out first probably get a filter like 420FARTBOSS said.
http://www.evapo-rust.com/
other than that I was looking at the red-kote as well but seemed a bit more involved https://www.amazon.com/Red-Kote-Quart-Sealer-Diesel/dp/B009X0JOSM
I just posted a few photos to imgur. Grom Gopro mounting
The camera is a gopro 5 black, set to linear view (no distortion).
Oh, when I was looking for gopro mounting extensions, I found this set on amazon: 3-extension set
I'm using the longest extension (~4").
https://www.amazon.com/Goof-Off-FG659-Remover-22-Ounce/dp/B001NZSCDS/ref=sr_1_6?ie=UTF8&qid=1522290222&sr=8-6&keywords=goof+off&dpID=41-MQCma-VL&preST=_SY300_QL70_&dpSrc=srch
This is how.
I bought a sealable plastic container from Autozone . Drain the oil into a pan, then pour the pan into the container. Any auto parts store will have an oil dump where you can empty the container.
What kind of bike needs a lift for an oil change?
SCREW EXTRACTORS ARE RISKY!!!! They can and do break on machine parts, just come look at my poor, (currently) useless bike if you don't believe me.
But there is a similar and better alternative:
https://www.amazon.com/dp/B0002SRG66/ref=cm_sw_r_udp_awd_JW37tb1Z570F5
Good luck, broken bolts suck.