Top products from r/GalaxysEdge

One of the things I'd say is that to get real nice effects that look good in person, it pays to use different media, not just colors of paint. I like Rub n' Buff paste for metal, as you can apply it very very lightly on prominent edges with a dry brush and gradually build up the wear, and you can buff it to a high metallic sheen.

For gunmetal or carbon build-up, graphite powder is excellent, although it never dries, since it's already dry, and isn't great for handling. A little spray fix is good for that.

An overall wash with very thinned acryllics, which you then wipe off, gives good overall staining, then some pastel powder of various earth tones in a couple spots, especially on the feet.


Overall, don't just slap stuff everywhere. The key to it looking right is to do techniques where they'd show up in real life. More intense "dirt" washing at the bottom. Bare metal on salient edges and moving edges. "Oil" near mechanical parts, etc.

I used a SupCase for my iPhone. The back isn’t completely flat but it didnt matter to me since I was kit bashing it. I did like the grooves around the edges to help go with it. Also, the belt clips helps keep your datapad easily accessible compared to in the pocket or bag where pieces can break off.

I agree, it’s fantastic! If you didn’t already, read Galaxy’s Edge: Black Spire by Delilah Dawson! It’s a great read! https://www.amazon.com/dp/0593128389/ref=cm_sw_r_cp_awdb_t1_K0.LDb6Q4NCT5

This is the same as Han Solo’s belt. I love it.

BS200 Three Hole Genuine Leather Casual Jean Belt-Brown 1-3/4" wide (40, Brown) https://www.amazon.com/dp/B008F9VY1W/ref=cm_sw_r_sms_c_api_i_0ICTDbPHYHKDF

Someone shared this one in another thread here that I had found and saved awhile back: https://www.amazon.com/dp/B07F58LXFP/?coliid=I7R5Z94PLFVYG&colid=29QA2M1G0U5WS&psc=1&ref_=lv_ov_lig_dp_it

It doesn't have the personality chip, but you can save around $40-$50 on a BB Droid by buying one of these.

The movement mechanism is exactly the same as the one from the parks.

For vertical to about 45 degrees. Clear mount.


YYST Clear Light Saber Wall Mount... https://www.amazon.com/dp/B07F58LXFP?ref=ppx_pop_mob_ap_share

Looks like the same one I got. I like it a lot.

Here's the link: https://www.amazon.com/gp/product/B07F58LXFP

I needed a place to put my Droid's remote where it wouldn't get lost (or slapped around by the cat). The solution was the 3M Command Sponge Caddy! (https://smile.amazon.com/gp/product/B071RCDFHL/)

​

As you can see, the remote fits in there like it was custom made for it. I stuck it to the wall right above my R2's parking space.

Got them from amazon


Jusalpha 12 Inch Contemporary Clear Acrylic Floating Shelves -Wall Mounted Display Organizer, Set of 2 (12 Inches) https://www.amazon.com/dp/B01MU2SV7G/ref=cm_sw_r_cp_api_i_6b8NDbZRAHF93

I ordered the mounts from Amazon. They work really well.

https://www.amazon.com/YYST-Clear-Light-Saber-Holder/dp/B07F58LXFP?ref_=ast_bbp_dp&th=1&psc=1

Search Amazon for Middle Eastern, Asian, and North African-inspired fashion. I'm going with these Buttonless cardigans: 1,
2, a v-neck t-shirt, harem pants, a tactical belt, a scarf and a pair of boots.

Shirt and pants go on first, then boots and the hoodless cardigan. Then I tie the scarf around my waist to hold the cardigan closed and don the belt over it. Hooded cardigan goes on last.

The outfit has a Jedi-esque look blended with a Batuu vibe.

No. It's from Amazon. It's a soft wood so I just pushed my Savi's pin into it. :) https://www.amazon.com/gp/product/B000G66DLI/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1

Sure thing.

https://www.amazon.com/dp/B07RBQZKLL/ref=cm_sw_r_cp_api_i_H6nVDbR8HM9VY

I've wrong
https://smile.amazon.com/gp/product/B07Q1Z9BHJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

and

https://smile.amazon.com/gp/product/B071WRHQ9H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

both aren't too heavy and pretty comfy, pair it with some light slacks and boots and you should have a decent costume. I wear the cloak almost every time I go.

https://www.amazon.com/Cascade-Mountain-Tech-Pop-Lantern/dp/B01FGE90WI

Store my blades in a shotgun scabbard and water bottle pouches attached to it.

Scabbard – $25 - https://www.amazon.com/gp/product/B004693H3S/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Hilt pouch that attaches to webbing - $17 - https://www.amazon.com/gp/product/B06XDJBNF3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Darice Unfinished Wooden Wine... https://www.amazon.com/dp/B007PEUJUU?ref=ppx_pop_mob_ap_share

https://www.amazon.com/dp/B07F58LXFP/ref=cm_sw_r_cp_awdb_t1_yfSEDbZY67G95

https://www.amazon.com/gp/aw/d/B07F58LXFP?psc=1&ref=ppx_pop_mob_b_asin_title

These are what I use with all my lightsabers even my son's​ Rancor elemental

https://www.amazon.com/Cascade-Mountain-Tech-Pop-Lantern/dp/B01FGE90WI

Their Endor one is what I'm considering. Along with the Bioworld Rogue One.

Has anyone used the one that displays it horizontally? It is the same price I am just mildly concerned about my lightsaber falling.

​

https://www.amazon.com/YYST-Light-Saber-Mount-Display/dp/B07DLXKMJX/ref=sr_1_2?keywords=YYST+Clear+Light+Saber+Wall+Mount&qid=1567919382&s=home-garden&sr=1-2