Top products from r/Mandalorian

You can get the original parts online. That's what I did for my Fett.

• Squeegee
  
  
• Chemical Stirrer
  
  The security blade is made from part of the squeegee, a piece of plastic and some metal rods (I got these from CombatBaby on TDH). I used a small section of pipe for the jetpack adjustment tool.
  
  I saw you were also asking about a holster. You can get that from Kcr7pr or Fett Pride on TDH. It's pretty expensive...

looks pretty good so far! Here is what mando mercs uses for visor plastic btw if i remember correctly. You can of course get clear and tint it any color you want.

https://www.amazon.com/3M-90030-Professional-Faceshield-Replacement/dp/B000BOABVI/ref=sr_1_10?s=lawn-garden&ie=UTF8&qid=1478425698&sr=1-10&keywords=safety+face+shield

Still awaiting its arrival but like i said theres one on amazon for very reasonably just requiring some lite modification and finish work.
Hopefully this doesnt get removed.
https://www.amazon.com/dp/B000H3UJJ2/ref=cm_sw_r_cp_apa_eZqWBb9WYNZWQ

Velcro, magnets, and snaps are all common. Chicago screws are an option, but less common.

Velcro us the most forgiving. You can adjust as needed after application, but over time it may lose its stick. This can be minimized by never taking off the plates

Magnets are a good choice and what I would choose to use personally, as it let's you take off the plates for cleaning/transport. Epoxy magnets to the plates and sew washers or similar into the vest.

Snaps are gonna give you a more solid attachment than either magnets or velcro, but at the cost of requiring absolute precision. If you screw up placement you either have to rivet a new hole in the vest or cut out the epoxy.

Chicago screws ( image here ) are epoxies post side to the plates and are paired with grommets in the vest to make the most secure mounting.

Hey I made a kukri for my kit, I used a kukri prop I got from Amazon. Highly recommend it if you live somewhere you can order from Amazon, it's got a nice weight and is really sturdy (it's a training prop, you can hit hard with it and it won't break). Not to mention it's $10 if you can get free shipping.

Pic 1, before painting

Pic 2, after painting (sorry for the potato quality, I don't have another one handy and can't go take a better picture now)

Pic 3, in sheath (made with worbla and fake leather fabric)

You're already on the right path and looking great. Base silver, mask and spray on top.

First thing stop using toothpaste, go to Micheals, Joanns, or hobby lobby and pick up some liquid latex masking fluid and silicone brushes. Having the right tools will make your job much easier.

https://www.amazon.com/Winsor-Newton-Masking-Fluid-75ml/dp/B005P1ROEY

https://www.amazon.com/MEEDEN-Artist-Professional-Silicone-Brushes/dp/B078XZ1WZ9/ref=sr_1_2?keywords=silicone+paintb+brush&qid=1568208585&s=office-products&sr=1-2-spell

The amount of control you'll get will just be so much better. and that masking fluid will last you a LONG time,

Then study the way paint chips on metal and boba's helmet. You want to make sure you're not just chipping down to bare metal, but in some places chipping down to the color underneath, this will give you some extra depth.

Last is give it a grime wash. Multiple ways to do that, youtube tutorials are your friend as you can see exactly what to do. I take a brown acrylic paint, mix a little black until I get a used motor oil color, then water it down a lot, like whole milk consistency. then I paint the entire helmet with it, let it dry, then lightly sand it off with 320 grit sand paper and repeat. It causes the grime to end up collecting in the recesses, I can control where I want it dirtier by not sanding as much in certain areas, and it scuffs up the paint a bit to give it a more worn in look. Note that your helmets will look cleaner in pictures than they will in person.

Here's some of my stuff for the look I end up with.

https://www.instagram.com/p/Bvp2yROlKE3/

https://www.instagram.com/p/BvxcD9AHiCP/

https://www.instagram.com/p/Bvl7KVxnObg/

I got these off Amazon. Here’s a link Funtasma by Pleaser Men's Halloween Walker-130,Brown,M (US Men's 10-11 M) https://www.amazon.com/dp/B001AH59YE/ref=cm_sw_r_cp_api_i_os4tDbPEQ4TJJ

Wife made it for ya huh? Funny, she must have made the one I have on my car too.

https://www.amazon.com/gp/product/B007GOZO6I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

here at Amazon

the Vader one is cool too

Found it on Amazon: Mandalorian Skull Chrome Auto Emblem - 3" x 2.5" https://www.amazon.com/dp/B01M190FW9/ref=cm_sw_r_cp_apa_i_703ZCbZ2EG6XH

For you armor you want to look into using something like:

http://www.amazon.com/Online-Metal-Supply-Sintra-Expanded/dp/B00D0RTR0O/ref=sr_1_1?ie=UTF8&qid=1382416884&sr=8-1&keywords=sintra

Using a heat gun you can mold that to just about anything.

https://www.amazon.com/Rust-Oleum-Rustoleum-302597-Tidal-Chalked/dp/B01JB78BW6

Over

https://www.rustoleum.com/product-catalog/consumer-brands/universal/universal-hammered-spray-paint

Then lightly sanded.

hell of a price too

Rubie's Men's Star Wars Deluxe Injection Molded Adult 2-Piece Jango Fett Mask, Multicolor, One Size https://www.amazon.com/dp/B000H3UJJ2/ref=cm_sw_r_cp_apa_i_xtCEDb9VZ56NV

Or Google the dented bucket or mandalorian mercs both pages have templates and material lists

The Bounty Hunter Wars Book 1 Book 2 Book 3
and A Practical Man