Top products from r/SciontC

We found 24 product mentions on r/SciontC. We ranked the 41 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/SciontC:

u/StepsAscended22 · 5 pointsr/SciontC

I installed a Kenwood DMX7705S in my first gen and Android Auto works great with it. I also went the extra mile and installed a Maestro idatalink to keep the steering wheel controls and also have the ability to read the OBD II codes incase my check engine light comes on.

Edit: Here's an old thread where I detail a little more on what's needed for the installation.

Double edit: If you're also interested in getting a sub and don't want to clutter up the area behind the back seats, I suggest checking out this Bazooka enclosure that is made specifically for first gen tCs. It's pretty simple to install and the wiring harness connects straight to the stock wiring for the radio.

u/13AccentVA · 2 pointsr/SciontC

I got a pair of these. Super cheap but surprisingly good. Originally intended to be temporary while I repaired the old ones, but after the break in I think they sound better than the old expensive ones.

Both in a ported box aimed up, pushed by this amp.

u/Fried_rice007 · 1 pointr/SciontC

Thanks for sharing a the product!

Looks like the same store offers the same product for slightly cheap off Amazon

https://www.amazon.com/iJDMTOY-Conversion-Subaru-Toyota-Nissan/dp/B00F4ISG9K?th=1&psc=1

u/Narc3119 · 3 pointsr/SciontC

i replaced both of mine on my 05. they're like $40 shipped on ebay and amazon. you need to buy a pry kit like this to pop it off and then it slides right in.

https://www.amazon.com/KINGLAKE-Panel-Removal-Radio-Installer/dp/B00HNMLQAG/ref=sr_1_4?keywords=pry+kit&qid=1549632120&sr=8-4


https://www.youtube.com/watch?v=r5_-pebbIwk

u/Juntistik · 4 pointsr/SciontC

If you're looking for a practical sub box, this thing is the way to go. fits a 10" and is reasonably priced. Not only is this a custom Scion TC box on the cheap, but they even throw in a built in 100 rms (200 peak) sub/amp combo. What a steal. Of course I took out the original sub and put in a Focal P25 since I already had it and wired it to a different amp.

But this was a steal. Not only is this box pretty awesome, but the stock sub and amp is too. they even tossed in a wiring harness that plugs into the stock radio. It's pretty freaking loud for how cheap the sub is. I'm just so happy I can still use my trunk and fold the seats flat for any purpose.

u/karijuana · 1 pointr/SciontC

Look into R1 Concepts. I've had their budget (named ELINE) rotors with the basic zinc coating, GEOMET coated rotors, and ceramic pads on my tC2 and they've done great. I've even autocrossed a few times. Right now you can get front drilled and slotted ELINE rotors and ceramic pads for the front for $106 on Amazon. https://smile.amazon.com/dp/B00J4PO684/ref=cm_sw_r_sms_apa_i_7.AZDbJ8NYYK3

u/Tragic-Hero · 2 pointsr/SciontC

I have used a hitch mounted back rack for many trips. It works great and can hold 300-500 pounds depending on the rack. Link for Hitch and rack. Video of install.

u/Mr_August_Grimm · 3 pointsr/SciontC

Winjet foglights: https://www.amazon.com/gp/aw/d/B01HSN8B02?psc=1&ref=ppx_pop_mob_b_asin_title

Winjet grill foglights:
https://www.amazon.com/gp/aw/d/B002XGWDGI?psc=1&ref=ppx_pop_mob_b_asin_title

I installed foglights on my 2009 last weekend. The screws to mount the foglights where too small so I had to go to Lowe's for some wider ones, but other than that it was pretty simple. I used a fuse tap in the cigarette lighter fusr in order to power the switch.

u/cweber219 · 2 pointsr/SciontC

Heres a link to a oem cap I used for my 08 and worked amazing
Gas Cap Scion tC 2004-2008 Genuine Toyota OEM New Fuel Cap https://www.amazon.com/dp/B005CDSWX2/ref=cm_sw_r_cp_apa_i_qFPDCbTS0YCHH

u/RollingThunderPants · 1 pointr/SciontC

Before you do this, I HIGHLY recommend using Rapid Tac. Otherwise, you’ll be lucky to apply it dry and not have bubbles.

u/ImperialAgent · 1 pointr/SciontC

I also have a 2014 and I use This i put it on my vent, I use the bluetooth and people can hear me.

u/ArkhamAsylum · 3 pointsr/SciontC

When I removed mine I used of these plastic trim tools.

u/kidjudge · 1 pointr/SciontC

Found this on Amazon Plugable it converts that data usb to a charger

u/LastnameWurst · 1 pointr/SciontC

I just recently installed a set of Spec-D Tuning headlights, Fog lights, and a billet grill on my car. The headlights and fog lights came in a set but are currently out of stock right now on Amazon.

u/alphaqsidewayz · 1 pointr/SciontC

I suggest you to just take off your spindle and go to a shop to get it pressed out which is usually about 30 bucks a side. Get these: https://www.amazon.com/gp/product/B000BZ6XJQ/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

and nothing else or OEM. I have tried Raybestos and Dorman both of em sucked.

You can just leave your ball joint on when they press the bearings out since it doesn't get in the way of the press. Get an alignment afterwards as anytime you work on your front end it screws the alignment up a bit.