Top products from r/ToyotaPickup

We found 20 product mentions on r/ToyotaPickup. We ranked the 14 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/ToyotaPickup:

u/tehmobius · 1 pointr/ToyotaPickup

I personally hate most of the ridiculous looking replacement lights, but I don't think these look cheesy at all in person. Performance wise it is 100% worth it. The amount of light these new LEDs put out is fantastic.

Just be aware that due to the way the wiring is set up on our trucks, you will probably have to get an adapter wiring harness. Overall it was about $100 for everything.

Harness Link

Lights

Here's a picture from u/carriemcbride628
https://i.redd.it/u1zqf3mt6kc31.jpg


If you want any more info or pictures let me know.

u/intheaterssoon · 1 pointr/ToyotaPickup

https://www.amazon.com/National-Carburetors-TOY507-Toyota-Carburetor/dp/B000CH25N6

That's too bad the only review is one star. haha Hopefully most of them work great. I'm in need of one. How does yours seem? Run it yet?

u/SaysHiToAssholes · 2 pointsr/ToyotaPickup

https://smile.amazon.com/gp/product/B018YFS2IY/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1

This is what I bought for my 2019 tacoma and it is nice. You will have to search to see if they have one that will fit your truck.

u/IV0lV_Alfa · 2 pointsr/ToyotaPickup

Nothing factory can really match a light bar, or a portable sun as I like to call them. But LED sealed beam replacements, especially if you are willing to pay like $300 for a set of these, are really damn bright.

u/GoldenHairedBoy · 1 pointr/ToyotaPickup

I use this thing: https://www.amazon.com/Actron-CP7605-Tachometer-Voltmeter-Analyzer/dp/B00062YUUS/ref=cm_cr_arp_d_product_top?ie=UTF8, which looks like it's out of production. But this thing looks alright too...https://www.amazon.com/Actron-CP7677-Automotive-TroubleShooter-Multimeter/dp/B0002LZU7K/ref=sr_1_2?keywords=dwell+tach&qid=1557710630&s=automotive&sr=1-2

I think on your model you just connect it to the battery (mine goes on the coil however). The directions should say how to hook it up. Generally you just set it to "4 cyl." and it should read somewhere between 600-3500 rpm.

​

If we think it's the carburetor (choke specific), it's important to rule out anything else. Here's a list of things to check before adjusting the carburetor:

- NO vacuum leaks. This includes intake & exhaust manifolds, carburetor base, pcv hose, brake booster hose, AND all 3mm hoses like the vacuum advance or smog lines. Vacuum leaks can mess with your idle speed. Basically anywhere there's a vacuum connection, make sure it's not leaking. I like to replace all rubber and spray carb cleaner around metal connections.

- Timing and distributor air gap. You can set these things even with the fast idle you've got. It just has to be running (unless you do a static adjustment, which I don't know how to do). Just get a timing light and some brass feeler gauges. Timing = 8deg BTDC, Air Gap = .008" to .016"

- Valve Adjustment. As the engine is recently rebuilt, this probably isn't an issue. Anyways: Intake = .008", Exhaust = .012", HOT.

- Float Level. Look at the glass on the front of the carb. The fuel level should be right in the middle. If it isn't take the top off the carb, flip it upside down and do this: https://board.marlincrawler.com/proxy.php?request=http%3A%2F%2Fi94.photobucket.com%2Falbums%2Fl104%2Fspcmike%2FDSC03557.jpg&hash=77ab726ca7e4065975c0b98df09b6f94

​

Questions: You say it sometimes won't idle at all at startup. Will it idle once warm? If so, does the idle go down to more of a normal speed when warm? Also, when it doesn't start correctly, is the engine hot or cold?

​

It could be that both the choke adjustment and the basic idle adjustment are off. It may be that they're adjusted for the old, worn out engine that you rebuilt, which is why it used to work. It shouldn't be too hard to adjust. I like to do the idle first, then choke. If you need any more info, I'll be around. Best of luck.

u/Sctron84 · 1 pointr/ToyotaPickup

2wd? if so DNA headers makes one that all stainless for 130 bucks or so on amazon with free shipping. https://www.amazon.com/DNA-Motoring-HDS-4RUNNER90-24L-HDS4RUNNER9024L-Manifold/dp/B06Y6533G5/ref=sr_1_1?keywords=dna+header+4runner+2.4&qid=1564514080&s=gateway&sr=8-1 there is a review on youtube.. they look decent for the extremely low price.

u/computeroperator · 3 pointsr/ToyotaPickup

If you remove the door cylinder and ignition cylinder and take them to a good, old fashioned locksmith they can probably remove the broken keys and decode them for you. Then make you new ones.

My old keys wore out and I had this done. I got a nice Toyota blank from Amazon but you don't need to do that if you don't want to.

https://www.amazon.com/gp/product/B00TNYFY0K/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

u/Ilubalu · 3 pointsr/ToyotaPickup

If you're trying to make sense of Toyota part numbers, it does make sense to call a dealership's parts dept. Then, you can search online. This stuff is sold on Amazon.

Here's one seller's offering, and here is another.