Top products from r/arizer

Well I wouldn't be too worried. If you were everyday, allday, 30 minutes is still a kind of long time for arizer. They have timers on them I think?

Is there a reason you can't smoke inside aside from smell? DO you have any exhausts fans available to you two?(they blow air from inside straight to the outside, usually found in bathrooms) Vaping especially with something like an arizer(imo) the smell can be as strong as weed, but never lasts as long.

Now onto the next point. Carbon filters can be your best friend. They sell some pre made ones for pot smokers, but usually at a place like walmart in the states(anywhere that sells pet fish) has a carbon section and you can get a yuuuuuuuuuuge amount for cheap and throw it into a toiletpaper roll/paper towel roll and blow through and it will NOT smell.

The pot from the pipe itself will and any extra smoke you leave in the glass steams might leak out. But the carbon filter blow through will change your life.

https://www.amazon.com/Smoke-Buddy-Personal-Filter-Blue/dp/B00478UIB2

This an example of one in the states that gets used up after maybe 2 weeks of constant smoking which is why I mentioned just buying the materials and making a cheap one(just as effective) yourself. The arizer are awesome though and even if you had to go outside for 20ish minutes(i think the arizer shuts off automatically at 12) you will be able to finish your sets in that time.

If you're just looking for an excuse to get a new grinder, I totally empathize. If not, though, try holding your grinder upside down while you're grinding to keep your material going through those teeth. You can grind a lot smaller that way.

If you want a new grinder, I'd get a clear-top Sharpstone. I've had this grinder for years now. The clear top lets you see very easily when you've ground it fine enough using the above method. The pollen press is a nice bonus, too. It presses your keif into nice little discs that you can slice up later to add a powerful kick to your bowl.

I use a long hose all the time for bags, I don't remember where the original short hose even went.

The only detriment to using a longer hose is you'll get a little more reclaim in the hose as the vapor cools on it's way to the bag. It's not something you're necessarily going to even notice day-to-day.

I will say, do yourself a favor and get some new silicone tubing (the correct size is 5/16" ID, 7/16" OD): http://www.amazon.com/gp/product/B000FMWTSY/

It's much, much easier to clean (you can use alcohol and other solvents), and way more flexible than the standard PVC hoses.

Charger: 2016 version Nitecore New i2 Intellicharge Universal Smart Battery Charger for 18650 AAA AA Li-Ion/NiMH US Plug https://www.amazon.com/dp/B01HOP6ADE/ref=cm_sw_r_cp_apa_d2duzb7N34Z31


Battery:2PCS Panasonic 18650 NCR18650B Rechargeable Li-ion Battery, Flat Top 3.7V 3400mAh, BONUS One Hard Plastic Case For Easier Storage and Transport https://www.amazon.com/dp/B01C4GFVN8/ref=cm_sw_r_cp_apa_L2duzbYS0EVB8

The EQ is a great value and versatile if you get a variation of DDAVEv3, this valve (2pk), and these bags. Don't forget to preheat the glass (without material) for at least 15-20 minutes before you do anything else.

Edit: here's a video that explains what the ddavemodv3 is/does.
I'd also watch his review, he mentions elbow packing/preheating/etc.

That is a 5V battery pack for cell phones and tablets. You need a 12V source to charge the solo.

Something like this:

http://amzn.com/B00935L44E

http://amzn.com/B005NGLTZQ

You could also buy a 12V solar panel and charge the solo that way.

The best vapes for off-the-grid use (except at altitude) are butane powered vapes (Hammer, Lotus, Wispr 2, etc.)

You might be able to find a stand like made for regular pens, vape pens or crafting supplies. I've seen wood ones on Amazon and clear plastic ones at Dollarama.

Maybe this will do the job, might be too tall though. https://www.amazon.ca/Ajax-Scientific-Drying-Capacity-Length/dp/B00EPQ4SL2/ref=sr_1_10?

or this

https://www.amazon.ca/Acrylic-Strong-Organizer-Laboratory-Exhibition/dp/B0721MCRRZ/ref=sr_1_9?keywords=test+tube+holder&qid=1555072355&s=gateway&sr=8-9keywords=test+tube+holder&qid=1555072251&s=gateway&sr=8-10

This single pen stand might be what you want too.

https://www.amazon.ca/Coideal-Container-Toothbrush-cigarette-Organizer/dp/B01KM540R6/ref=sr_1_5?keywords=pen+stand&qid=1555072442&s=gateway&sr=8-5

Pretty much any 18650 charger, and as long as they're quality high amp batteries:

https://www.amazon.com/version-Nitecore-Intellicharge-Universal-Battery/dp/B01HOP6ADE/ref=pd_lpo_vtph_200_lp_t_4?_encoding=UTF8&psc=1&refRID=ZVVEGEG3Y3V72DNS2ZGX

For batteries I like the brown LG HG2, but really, any high drain high amp 18650 battery will work fine.

I don't actually know the amp draw of the Air, but any 20A -
30A battery will be more than enough headroom.

If this is greek to you, you can always get batteries directly from Airizer. When I got my Air when it first came out, they wanted $25/ea for them, and they were selling a $5 charger for $30.

I use these camelbak bite valves with some minor modification. I cut the hole a bit bigger (fucked up twice trying) and pinch instead of biting, works alright but honestly I find I prefer covering he hole with my finger.

I recently ordered the all glass mini whip set from Arizer and I'm just going to find a small cork for that if the valves don't work... Or find bigger ones.

I've heard of people using something like this https://www.amazon.com/gp/aw/d/B006ZV5OIQ/ref=mp_s_a_1_31?qid=1466224027&sr=8-31&pi=SX200_QL40&keywords=camelbak+bite+valve&dpPl=1&dpID=31ny3TqN1mL&ref=plSrch with the Extreme Q bag. I haven't tried it myself, so I can't comment on how well it would work.

thanks, that was a good read.
for those too lazy to click the link
>Was helping out u/JFreedom14 as he didn't feel like he was getting the most out of his EQ. For those who are new to it (I'm still pretty new also.. 2 or 3 months with the eq).. I was asked about preventing leak at the bags, as the o-rings get loose the more you swap out the bag.. I just use zip ties.

>The bags I use are just roasting bags I found on amazon.. you just cut them to whatever size you want.For those curious about my EQ session looks like.. this is it:

>My process with the EQ:

>* Wake up in the morning, turn it on (all glass in place) crank it to Max temp, and leave it for 20 minutes... Brew coffee during this time, essential step in the process!!!

• after the 20 mins, clean up the glass a bit (just make sure there's no extra ABV from the night before. Etc) and drop.temp to 185 (c)
  
• load cyclone bowl (I use ddave mod for whip, but stock bowl for bags, ddave was too hot in the bag for me, even on lower temps. I usually use about 0.25g
  
• put the bowl on the EQ, let it sit for 2-3 minutes, pour coffee
  
• suck all the air out of the bag, as it can get a bit from just sitting there, put it on, and turn on fan (always speed 1), sip coffee while bag fills
  >* I will usually do 2 bags back to back, then leave it (always stir between bags), filling a bag when I felt like it.. 1 cyclone bowl usually gets me 6 bags (I do 2 on 185, then turn it up to 200 and do 2 more then 230 for the final 2). By bag 4 you'll start to notice it is not as thick, but theres still lots of terpenes in there waiting to work their magic! It'll thicken up once you get to 230!
  That 1 cyclone bowl will usually last me about 2-3 hours.
  
  >I only turn off the EQ at night when I'm go to bed.

http://www.amazon.com/Camelbak-Bite-Valve-Color-Pack/dp/B006ZV5OIQ

I use these, they fit right on the tip of the glass tube snugly and only let vapor out when you bite down and take a hit. I suggest buying the 3 pack because gnawing on them will wear it down after a month or so and need to be replaced.

Edit: Fixed the link, was on mobile at the time

Was helping out u/JFreedom14 as he didn't feel like he was getting the most out of his EQ. For those who are new to it (I'm still pretty new also.. 2 or 3 months with the eq).. I was asked about preventing leak at the bags, as the o-rings get loose the more you swap out the bag.. I just use zip ties.

The bags I use are just roasting bags I found on amazon.. you just cut them to whatever size you want.For those curious about my EQ session looks like.. this is it:

My process with the EQ:

• Wake up in the morning, turn it on (all glass in place) crank it to Max temp, and leave it for 20 minutes... Brew coffee during this time, essential step in the process!!!
  
• after the 20 mins, clean up the glass a bit (just make sure there's no extra ABV from the night before. Etc) and drop.temp to 185 (c)
  
• load cyclone bowl (I use ddave mod for whip, but stock bowl for bags, ddave was too hot in the bag for me, even on lower temps. I usually use about 0.25g
  
• put the bowl on the EQ, let it sit for 2-3 minutes, pour coffee
  
• suck all the air out of the bag, as it can get a bit from just sitting there, put it on, and turn on fan (always speed 1), sip coffee while bag fills
  
• I will usually do 2 bags back to back, then leave it (always stir between bags), filling a bag when I felt like it.. 1 cyclone bowl usually gets me 6 bags (I do 2 on 185, then turn it up to 200 and do 2 more then 230 for the final 2). By bag 4 you'll start to notice it is not as thick, but theres still lots of terpenes in there waiting to work their magic! It'll thicken up once you get to 230!
  
  That 1 cyclone bowl will usually last me about 2-3 hours.
  
  I only turn off the EQ at night when I'm go to bed.

I have a solo 2 as well. I was looking at this set

https://www.amazon.com/dp/B07NRJZP51/ref=cm_sw_r_sms_awdo_t1_NIS2Cb9X34N3Q


Looks nice for the price. I saw the other ones you mentioned too, I'm not sure but I think they're the same seller, because some of the stuff by bperfect redirects to jiancuo

Ouch, sorry to hear about your injury.

I just got a Test tube clamp and it’s been working great for moving my eq bowl while hot.

I've had mine for about 4 years and when it was 2-4 bags a day i was replacing bi-weekly so i bought an extra piece and just added extra bags to rotate because the oven bags were getting pricey.

Soon after that i added a dual bowl to the cyclone piece for 2 bags at once and i usually double fill so they're getting used twice per session. Someone recommended these and i haven't changed them in about 5 months and I'm just noticing now some stickiness.

Buddy Bags Co Multipurpose Nylon Turkey Oven Bags - 19" x 24.5" - 10 Pack

Heres some from planet vape.

Here is some from Amazon if you would rather go that way.

or here is some from home depot (which is carried at most stores)

I bought a bite valve. It worked perfectly, no longer have eq unfortunately.

This is the battery i've been looking at

Put a big glob on a piece of organic unbleached cotton and it will act like a wick inside the oven. If you're really lazy you could just throw it on some weed or some vaped bud.. but don't do wax by itself it will melt into places it doesn't belong.

awesome! I ordered this http://www.amazon.ca/dp/B0012LOQUQ but now I'm second guessing if I should have gone to a vape shop or go back to Friendly Stranger :S

guess ill test it out when it arrives :s I know a normal kitchen scale couldn't even detect the flower :(

No problem. These are them. http://www.amazon.com/White-Silicone-Rubber-Tubing-Grade/dp/B003TJ9YQU. The tube really doesn't get hot at all so it's not much to worry about. They are food grade. I get 5/16 inner diameter and 1/2 outer. I was a little off about the price though. It's about $2/ft

Crack in the glass mouthpiece? When you get it replaced (I would get a warranty replacement also, but I would still get the DDave Mod kit) you could try adding this to the end or somthing like it. This is an example of what I bought:

https://www.amazon.com/CamelBak-Reservoir-Big-Bite-Valves/dp/B00NTXIQ3S/ref=sr_1_6?crid=2IGNRAOI6146Y&keywords=bite+valves+for+camelback&qid=1567560533&s=gateway&sprefix=Bite+valve%2Caps%2C195&sr=8-6

I have read on either here or fuckcombustion.com that it is pointless to get anything that blocks the smoke from coming out the whip. Reason was that is it negligable. Ok...sure, I have nothing to say to that argument since how in the world could you prove or disprove? But from my own experience, I think it cuts down on the smell signifigantly. And in your case, it will protect the glass whip end from getting cracked.

I have the V-Tower with DDAve Mod v3 kit. It offers much more than I realized when I purchased. If you get the v3 kit, you will have MANY ways to change up your glass to suit your experience. I really had no idea just changing the size of the glass and where I 'pack' my herb would have such an impact on the intensity and flavor. It is crazy.

I also want to say that more companies and businesses could learn a lot from Mr. DDave as his customer service is second to none! I actually felt that he cared about my vaping experience I was getting with his products.