Top products from r/dualtron
We found 11 product mentions on r/dualtron. We ranked the 8 resulting products by number of redditors who mentioned them. Here are the top 20.
1. Crescent 20 Pc. 3/8" Drive Pass-Thru X6 Standard Spline Mechanics Tool Set - CX6PT20
Sentiment score: 0
Number of reviews: 2
Pass-Thru socket and ratchet system eliminates the need for deep socketsUp to 40% stronger than standard ratchets5° ratcheting swing arc provides turns restricted fastenersUp to 50% thinner than standard ratchets to give you greater accessIncluded adapter converts X6 box end for traditional square ...
2. Gardner Bender 07315001126 LTB-400 Liquid Electrical Tape, Easy-on, Waterproof, Indoor/Outdoor Use, 4 Oz. Jar, Black, Bottle
Sentiment score: 0
Number of reviews: 1
WaterproofIndoor/outdoor useRubber based coating will not harden
3. Hazet 848Z-18 Open-End Wrench Size 18 12-Point 3/8" Square
Sentiment score: -1
Number of reviews: 1
Drive: square, hollow 3/8 inchOutput: outside 12-Point profileWrench size: 18
4. Recoil 35059 Fix-A-Thred Metric M5X0.8 Kit, Multi-Colour
Sentiment score: 0
Number of reviews: 1
Metric M5 x0.8 kitHigh Quality wire thread insertsMost common sizes available
5. Bullet Butt Connectors, Sopoby 100pcs Assorted Insulated Female & Male Crimp Wire Terminals Brass, 22-16 AWG, 5 Colors
Sentiment score: 2
Number of reviews: 1
Material: Brass; Colors: Red, Blue, Yellow, Green, BlackComply with all Relevant European StandardsConnector Size: 0.5-1.5mm² /22-16 AWG cable; Max Current=19APackage Included: 100pcs---50 x Female(10pcs/color) + 50 x Male(10pcs/color) 【All colors are in same sizes.】Widely Used in the Machines,...
6. Wiipro Universal led Harley Davidson Light Strip Tail Brake Stop Turn Signal 32LED 8" Flexible led light for motorcycle
Sentiment score: 1
Number of reviews: 1
Material: Soft rubber strip with 3528 SMD LED; Fitting Position: License Plate LightLed light color: Red for brake and stop, Amber for turn signalSize: 20.5*1.3*0.8 cm / 8*0.5*0.3"; Power Cable Length: Approx 60cmVoltage: DC 12V; Waterproof Rate: IP 65; Easy Installation: Mount with 3M tape, 5 wires...
7. Jagwire Mountain Pro Brake Cable Kit Black
Sentiment score: 1
Number of reviews: 1
The mountain pro brake Kit is highly effective and lightDesigned for mountain biking, the sleeve is incompressible because fortified with Kevlar to maximize the performance of braking.The sleeve has an internal liner pré-lubrifié (slick-lube) that reduces any friction and improves the feeling of b...
8. NOCTURNE 2019 New, All-in-One Bicycle Light Handlebar Grips Set. Powerful Lumens LED. Headlight, Turn Signal, Brake Light and Emergency Blinker. Water Resistant (2 Set)
Sentiment score: 0
Number of reviews: 1
World 1st Technology: Nocturn is the world's first innovation all-in-one handlebar grip gear. Headlight, gyro sensor brake light, turn signal light, and emergency blinker helps you experience safer bike rides.Extremely Bright : Head light 125 lumens x 2, brake light 65 lumens x 2, turn signal 28 lum...
I don’t like too many things sticking out of my Spider either..
I’ve been thinking...
Wouldn’t it be nice to have a deck like this one which could blink yellow, independently, on each side (left/right)? This way, we’d be seen from pretty much all angles.
Maybe something like this could be adapted somewhere on the sides of the deck? What do you think? :)
What gauge are the motor wires? It's hard to tell from your pictures, but it looks like those connectors are a bit large. They fit wire gauges 1.5-2.5mm. If the wires are 1.5mm, something like this https://www.amazon.com/Connectors-Sopoby-Assorted-Insulated-Terminals/dp/B01F07UMNW may be more idiot-proof. I say that because you have two sets of yellow/blue/green wires so there's a chance you could cross-connect the same colors. But if you put a red connector on one yellow wire and a blue connector on the other yellow wire, it would be hard to cross-connect the yellow wires.
Disappointing about the brakes. It’s really annoying that they didn’t put the disc brake on the opposite side of the motor cable... I think it would have been a pretty easy mod if it weren’t for unsoldering the motor cable etc. One potentially very easy change would be replacing the brake cables with compressionless housing. I did this on my Zero 9 and it made a HUGE difference, about 30min mod Jagwire Pro Brake Cable Kit Mountain SRAM/Shimano Black https://www.amazon.com/dp/B01N0WYVCU/ref=cm_sw_r_cp_api_i_lVy4Cb2GNRT7N
>Actually, I ended up getting a "pass thru" wrench set which I think should work, but haven't had a chance to try yet.
Interesting, I wasn't aware of this one. Indeed could be really useful.
The only downside that I see is that you'll most likely have to remove the rear motor cable connectors, because you'll need to remove the rubber nut cap. When I was changing my rear brake disc last week, I managed to do that without removing the connectors.
Front motor cable connectors though have to be removed every time - otherwise it's just fucking impossible to pull it through those tight holes of the front suspension.
yeah I was there too.. cutting cable, damaging screw holes on both, deck and motor etc etc. One thing I would recommend is this tool for big nuts with the cable. https://www.amazon.de/gp/product/B001C9VLRO/ref=ox_sc_act_title_2?smid=A3JWKAKR8XB7XF&psc=1
> Yep, get those BGS flare nut spanners
Actually, I ended up getting a "pass thru" wrench set which I think should work, but haven't had a chance to try yet.
> The screws holding the caliper bracket however might as well be welded in - those were a son of a bitch to loosen up.
Fuck me -- mine was in so tight I stripped the head right off and ended up having to dremel the damn thing out and go buy replacements. That was before I had the fire insight -- after which things went much better.