Top products from r/hondagrom

I used the Ambother kit on Amazon it was like 35$ or so and I have the aodonly dual exhaust which was 250$, worth every penny! Only been on for a week or two but it sounds great! Without the baffles in its a bit extreme😂😂

Ambother LED kit

Aodonly Exhaust

Levers are very easy to replace. You can get:
OEM replacements from Partzilla, AVS or CRG RC2 levers from DROWsports, Steady Garage, Hard Racing etc.

I went with a cheap set off Amazon that someone had recommend on the HGN forum. The fit perfectly and work as you’d expect them.

I'm 6'4" so I can feel about 80% of your pain.

​

The two things I did to get more comfortable was picked up this seat from Amazon for about $100, it eliminates the hump and makes it so much easier to slide back a little.

https://www.amazon.com/gp/product/B07D5M1FKW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

​

Also I got the Pro Taper XR50 handlebars, they are a bit taller than the stock bars and then like you when I installed them, I have them angles more forward to the point that they are almost straight up and down, and my riding position is so much better.

​

​

Also just accept that you look ridiculous on it and embrace it. :)

Fender delete is from Vagabond Motorsports. They have a YouTube video that makes installation a breeze.

Link: https://www.amazon.com/dp/B01M0VTHCF/ref=cm_sw_r_cp_api_l6B4BbZR0N13E

I’m loving the Zoom. I paired mine with the chimera intake and the bike pulls much harder in 2nd/3rd gear. Great sound and solid dB level for other drivers to hear you coming.

Amazon exhaust for $88 is hard to beat.

Motorcycle complete exhaust with tip and baffle Fit for Honda Grom Msx125 2013-2019 (Full black) https://www.amazon.com/dp/B07BHMFXMD/ref=cm_sw_r_cp_apa_i_QqduDb9N7QQEA

It sounds pretty good. Much more aggressive than stock. Sounds like a 250cc dirtbike. But still quiet on idle.

I'd recommend playing with different combinations of the baffle insert to get your preferred sound.

Definitely! If you end up going that route, keep your stock exhaust in the garage or something. The straight pipe has no catalytic converter, thus may not pass an emissions test depending on laws in OK. I'm not sure how strict they are. Just put your stock back on when you get the inspections done, and switch it back out when you get home. Takes like 30 minutes tops. Links here:

https://www.amazon.com/dp/B07PQ6XV29/ and https://www.amazon.com/dp/B00GMNL36E/

I have these-

https://www.amazon.com/gp/product/B008Q5J6UG/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

Not sure if they're available in the UK- They're good bags for the price, fit the grom nicely

I have these on mine and they work great. just had to tighten some of the bolts on the levers to prevent them from shaking around. Install takes 10 mins tops.

https://www.amazon.com/gp/product/B00O8AKBUM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Thanks! I got the Vagabond: https://www.amazon.com/Vagabond-Motorsports-VM-HG710-Fender-Eliminator/dp/B01M0VTHCF

I like it because it was very easy to install, required no permanent modifications, and used the stock turn signals and license plate light.

Edit: Here's a before/after pic: https://i.imgur.com/JJFddUj.jpg

I got there mirrors on Amazon

They're definitely not super high quality but they look good and dont vibrate bad.

This one

https://www.amazon.com/dp/B005FMTX4M/ref=cm_sw_r_awd_Z0J1wbA0EYSS0

Pretty generic!

Edit: I took out all of the little adapter things it comes with and just removed the screw from the end of the handle bars and put it there. I can clarify this more if you'd like.

Hey Buddy - I saw this fender delete listed in a post a while back and everyone seemed to love it: https://www.amazon.com/gp/product/B01M0VTHCF/ref=ox_sc_saved_title_1?smid=A1W5TMCJ579Y88&psc=1

Best bang for your buck - https://www.amazon.com/Motorcycle-complete-exhaust-baffle-2013-2018/dp/B07BHMFXMD

Although not what you asked I found this to be a great choice for me with similar issues....
IMS 313114 Flightline Folding Shift Lever https://www.amazon.com/dp/B000WMRN1K/ref=cm_sw_r_cp_tai_dO76ybP0T2EQM

https://www.amazon.com/Valvoline-10W-40-Stroke-Motorcycle-Oil/dp/B00DJ4FGMQ

It's not happening when I shift, it's nothing about a false neutral, I rode the bike for two months, i'm familiar with those. I'm losing the ability to shift at all, it's like once the bike warms up the clutch is stuck pulled like i'm holding the lever when i'm not and the clutch cable has been adjusted

https://www.amazon.com/Window-Bumper-Sticker-package-stickerciti/dp/B008QPTV2E

That’s where I got it (:

This one is pretty quiet with the baffle

I was looking at other shifters, Amazon yielded this: IMS 313114 Flightline Folding Shift Lever IMS https://www.amazon.com/dp/B000WMRN1K/ref=cm_sw_r_sms_awdo_WduWzbBPQA1QK

The reviews say it works for 2015s... and afik, the controls are all the same right? Would this actually work? Seems correct like it would, no?

There is also an option like this:


Rage Powersports Black Widow Hitch-Mounted Aluminum Motorcycle Carrier - 400 lb. Capacity https://www.amazon.com/dp/B001IUV1CM/ref=cm_sw_r_cp_api_i_jP7PDb3WAXPP4

Definitely. I mean if these don't work for you or they break then maybe invest in ones that are bit more expensive. Again, up to you though.

Difference between the one I posted and the one OP has is the ones on Amazon are foldable

Here's the link: Black Foldable 3" Round 7/8" Handle Bar End Side Mirrors for Harley Davidson Honda Kawasaki Suzuki Yamaha Cruiser Dirt Bike Scooter ATV https://www.amazon.com/dp/B01MYZ8GPF/ref=cm_sw_r_cp_api_j1B4Bb765V5Q9

AMBOTHER 8Pcs Motorcycle LED Light Kit Strips Multi-Color Accent Glow Neon Lights Lamp Flexible with Remote Controller for Harley Davidson Honda Kawasaki Suzuki Ducati Polaris, 1 Year Warranty https://www.amazon.com/dp/B01N7KH8MB/ref=cm_sw_r_cp_api_i_wh1ODb3P4ZFXY

This one

Dont know if this was strictly an issue with mine, but i had to buy new screws for it that were a bit longer. The screw that came with it is only long enough if you dont keep the rubber gaurd on the end of the bars, but if you dont have that you will have to force your throttle back and forth lol

https://www.amazon.com/dp/B07Z4CPR2K

Heres a shirt

Here you go:

https://www.amazon.com/gp/product/B07BHMFXMD/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Buddy of mine got this one. Honda Grom 2016-2019 Replacement Seat Model (SF4) Flat For Honda Grom 2016-2019 MSX SF https://www.amazon.com/dp/B07D5M1FKW/ref=cm_sw_r_cp_apa_i_vUpSCbFZASGJW

I just ordered it today too. It's comfy

here ya go!

I went with the 30W.. I think it only took a half liter maybe? Don’t quite remember.
PJ1 2-30W-1L 30W Fork Tuner Oil, 1 L https://www.amazon.com/dp/B000WJXBS2/ref=cm_sw_r_cp_api_i_BA2cBb95F9140

yup

https://www.amazon.ca/gp/product/B00CHCPT32/ref=ppx_yo_dt_b_asin_image_o06_s00?ie=UTF8&psc=1

https://www.amazon.com/Neverlandback%C2%AE-Stealth-Style-Motorcycle-Mirrors/dp/B00CHCPT32/ref=sr_1_1?keywords=neverlandback+mirrors&qid=1554756538&s=gateway&sr=8-1

Pants

Hard Shorts

Jacket 1

Jacket 2

Boots

Gloves

Helmet

I used this on my AR exhaust. $7. I had to weld it in though. I have tinnitus so totally understand. I ended up buying EarPeace earplugs that cut out sound over dangerous DB levels but still able to hear conversations etc. They're awesome.

BIKERS CHOICE EXHAUST PIPE BAFFLE 1-1/2 INCH OD STEEL https://www.amazon.com/dp/B00317DIVW/ref=cm_sw_r_cp_apip_ftOymIxuNSl4z

Same thoughts here, and no vibrations either. I have these: https://smile.amazon.com/gp/product/B01MYZ8GPF/

I've only done a few things but really my favorite so far is new mirrors, I think the round mirrors ruin the atheistic on a bike which is mostly hard angles, plus I can't see behind me with the stock mirrors.


I use these now
https://www.amazon.com/gp/product/B00CHCPT32/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Just do it now, why not? It's cheap, easy, and there are literally no downsides. Any loose metal/chips would have broken-free by now, so you're better off doing your first change early.

i5 Bar End Mirrors - Amazon

This mirror uses the stock bar-end bolt. Quality is okay for $19.95. You can crack the aluminum housing if you over torque the allen bolt.

Tip: Use a set of locking pliers to turn the bar end at the same time as the phillips head screw. You can try using an impact tool (the manual kind you tap with a hammer) if you're still struggling at that point.

TST has a DIY video on removing those stubborn bar ends here.