Top products from r/nissanfrontier

I'm sorry to hear about your buddy, I hope the benefit went well.

Oooh, I honestly dont know. I bought mine from the dealership but returned it as the original was still in good condition. I'd call the dealership and request the part number, they should be able to give you that. I found this, and apparently it will fit our Frontier, but I can't say with absolute certainty. ATP B-327 Automatic Transmission Filter Kit https://www.amazon.com/dp/B004QBZD1K/ref=cm_sw_r_cp_apa_Q0N1AbVM9FDK2

Another thing I would recommend is checking with ClubFrontier. One of those guys is bound to know.

I replaced:

1. driver and passenger side valve cover gaskets
   
   
2. driver side valve cover (FINDAUTO Valve Cover 13264-EA210... https://www.amazon.com/dp/B07Y1Q3C5Z?ref=ppx_pop_mob_ap_share ) (because I broke my original one trying to replace spark plug hole seals)....I recommend replacing both valve covers because those center seals are probably cooked if you’re anywhere near 100k+ miles—and they’re non-serviceable on the frontier’s cheesy plastic valve covers.
   
   
3. all 1-6 spark plugs (check that your ignition coils are also good while you have them out.)
   
   
4. Air plenum and throttle body gaskets (you can get them both as a kit) Vincos Upper Intake/Plenum Gasket... https://www.amazon.com/dp/B07PKQBLM1?ref=ppx_pop_mob_ap_share
   
   
5. Air filter: Bosch Workshop Air Filter 5486WS... https://www.amazon.com/dp/B00VC1Q0Q4?ref=ppx_pop_mob_ap_share
   
   
6. Engine air cleaner intake duct (mine were cracked): Engine Air Cleaner Intake Duct... https://www.amazon.com/dp/B07K7V2ZX6?ref=ppx_pop_mob_ap_share
   
   
7. Pcv Tube (I might be misnomering this part)— (breather tube between the two valve covers. Mine was completely dry rotted) Part No.: 11826-EA200 nissanpartsdeal.com
   
   
8. Two intake valve timing control gaskets (p/n 23797-ZA000 nissanpartsdeal.com)—mine were cashed and you have to take the air Plenum off to replace the passenger side one, so you might as well do it while your Plenum is off. You have to remove these valve control modules to remove the valve covers anyway, so replacing their gaskets is a no-brainer.
   
   •••••••••
   
   
9. My next project is to replace my oil cooler gasket:
   
   MAHLE Original B32573 Engine Oil... https://www.amazon.com/dp/B0184JRWN6?ref=ppx_pop_mob_ap_share
   
   Mine is pissing oil.
   
   •••••••••
   
   I also replaced my number 3 ignition coil. Mine was bad. A mechanic did that one for me. It’s a pisser. 🤦🏻‍♂️
   
   ••••••••
   
   If you need a good low-force torque wrench, I recommend this: TEKTON TRQ21101 1/4-Inch Drive... https://www.amazon.com/dp/B01M12284X?ref=ppx_pop_mob_ap_share
   
   It’s only 1/4” drive, but it works very well. High quality.

Auto Vent Shade. Got them on Amazon. Super easy install. Auto Ventshade 94407 Original... https://www.amazon.com/dp/B000CNJNWG?ref=ppx_pop_mob_ap_share

From the firestone website and this is the one I got from the Summit racing website. Delivery to Canada was made easy by using a fowarding business service. There’s also some listings on Amazon

Also, here are some alternatives if you don’t want to deal with compressed air

Hope you find something to suit your needs!

I went with the Truxedo Trucksport since it attaches above the utilitrack rather than on it, which has the benefit of still allowing full use of the track. $278 right now. Install is totally DIY’able but follow the instructions closely. It’s water tight and easy to roll up/unroll.

TruXedo TruXport Soft Roll-up https://www.amazon.com/dp/B000BK5496

This one fits perfectly in the little cutout on the dash, and it fits my iPhone 7 in the bulky Otterbox case.

TonnoPro Tonno Fold tri-fold. I've had mine since 2011, still going strong. $208.99 on Amazon.

It's a snap to flip up if you need it open, or completely remove it and put back on. I hate roll ups, they are a hassle to secure and put back in comparison.

EDIT: Looks like there is a "clip this coupon" on Amazon for another $30 off. That makes it $178.99.

Excellent. Found them cheap. https://www.amazon.com/Dorman-38541-Tailgate-Cable-Pack/dp/B000EQCXS2/ref=sr_1_2?s=automotive&ie=UTF8&qid=1504185361&sr=1-2&keywords=frontierwww.amazon.com/s/ref=nb_sb_noss_2?url=node%3D15723011&field-keywords=frontier

CravenSpeed Stubby Antenna Replacement for the Nissan Frontier 1998-2018 | 4 inches https://www.amazon.com/dp/B00757GT1U/ref=cm_sw_r_cp_api_i_VOW2Db7X03DKF

Fits and looks great! AM deception takes a hit on some longer range stations, in my experience. However, I don’t listen to the radio mostly.

I just got these - https://www.amazon.com/gp/product/B0013CD47U/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

They are coming today. It seems this premium stock sound may be hooked up to some amp, that is pushing the right things to the tweeters and 3 ways midrange in the front, so went with these easy install mid bass for the back, eventually I may put in a new doubledin deck (with DVD bypass) and an amp, no room for sub though.

Here's one for you:Tonno Pro 42-402 Trifold Truck Tonneau Cover

If you have Utilitracks, don't forget the brackets.

Those are Canadian links, but you can get the same in the States

Phone holder

AntennaX Off-Road (13-inch) Antenna

The Stubby

This one.

Spyder Auto Nissan... https://www.amazon.ca/dp/B004W4OJ9S?ref=ppx_pop_mob_ap_share

https://www.amazon.com/Sachs-SG325900EZ-Lift-Support/dp/B002HVKJU6

Yup

I just got this bull bar

In Canada we have to have front and back license plates and that has plate holder screws in the front. I also have a light bar on it, I'll be installing it this weekend if the weather holds up along with fog lights to replace the blanks, pictures to follow.

I bought a cheap pair off of Amazon and they are ok but not great I am probably going to get the oem replacement mirrors in a few months but they are a little pricy.

I had the same problem. I put a little loctite on mine and left off the lock washer.

I've slept in mine with an over sized (as in meant for an 8ft bed) tent and a regular queen size air mattress. This would be the correct size for the tent i used, but any 6ft will work fine.

It's doable, you'll just end up taking the whole bed plus the length of the tailgate.
As far as weather goes the tent will be about the same as any other ground tent. If the weather gets bad, just turn your pickup into the wind.

Just to confirm. (I’m sorry for the annoyance, this is my first truck and first time looking into modding it)


ReadyLift 69-4510 Smart Suspension Technology Lift Kit https://www.amazon.com/dp/B001F9FM9Y/ref=cm_sw_r_cp_api_i_FJSBCbW9H2A7S

Bilstein 24-137430 4600 Series Shock Absorber 4600 Series Shock Absorber https://www.amazon.com/dp/B007N6OWGM/ref=cm_sw_r_cp_api_i_8KSBCb9XEZX35

Bilstein 24-186155 Monotube Shock Absorber, Rear, 46mm https://www.amazon.com/dp/B004WO9MNG/ref=cm_sw_r_cp_api_i_nLSBCbHE31A5P