Top products from r/polymer80

We found 23 product mentions on r/polymer80. We ranked the 19 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/polymer80:

u/vast1983 · 6 pointsr/polymer80

Case Club Tactical Rifle Case with Closed Cell Military Grade Polyethylene Foam- 51 inch

https://www.amazon.com/gp/product/B07PJTXCKR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hand cut all the foam with the included razor. Not perfect, but I'm super happy with it. Traced everything with a white wax pencil, cut out all the way through, took the cut out piece, dissected it and put half back in the hole to bring the pistols/mags up to the right height above the foam.

As I tell everyone, if you buy from Amazon, sign up for smile.amazon.com and choose the second amendment foundation as your charity of choice. Buy stuff and smirk everytime Jeff Bezos has to donate a portion of the sale to them. :)

u/NerdSpecial_K · 2 pointsr/polymer80

What Ronin said...

These are pretty great for the price: Ameriglo Tall Suppress 3Dot Tritium For Glock

These are also a good deal: TRUGLO Tritium Pro Glow-in-The-Dark Handgun Night Sights for Glock Pistols

​

Both will work with your g19 slide, and are solid choices, even more so for their price point ($70). Free shipping if you have Amazon Prime.

u/GALACTON · 2 pointsr/polymer80

I'd just stipple it. I can tell you what to buy and how to do it including the borders. You'll need the following:

https://www.amazon.com/Dremel-107-Engraving-Cutter-Shank/dp/B00008Z9ZV/ or https://www.amazon.com/Dremel-106-Engraving-Cutter-8-Inch/dp/B00008Z9ZU
https://www.amazon.com/Dremel-120-volt-Variable-Attachment-Accessories/dp/B075174NCV/ (you may have your own dremel, but definitely get a flex shaft for it)
https://www.amazon.com/HTS-401B3-Multi-Grit-Diamond-Medium/dp/B00U0E0KRE
https://www.amazon.com/AUSTOR-Grinding-Polishing-Accessories-Attachment/dp/B078Y5XGM8 (careful with these, light touch and keep it moving)
https://www.amazon.com/Flitz-Multi-Purpose-Fiberglass-Aluminum-Sterling/dp/B000MUSOW4

First use your engraving cutter to cut the borders that you've drawn on with a water-removable Stabilo marking pencil. Try to cut as smoothly as possible, with a steady hand. Don't try to cut it all at once, be patient (be patient for all of this, it took me a whole week doing a little at a time to complete the whole process, and turning my dremel off periodically because I have an older model flex shaft that gets hot after some use - solved this by wrapping the grip with bicycle inner tube)
The smoother you cut it the easier the rest will be. Some people just use the engraving cutter for borders, but I followed someone's guide and then used the diamond burs to smooth it out and polish it. Go from the lowest grit to the highest. You can either use the ball bits that are the same size as your cutter, or use the rounded cylinder bits. You can angle the cylinder bits in certain ways to get around curved surfaces, you'll kind of have to experiment with that. Once you get to the highest grit, I found that the only way to get it near-glass smooth was to apply a lot of pressure. It doesn't remove much material and you kind of want it to heat up the plastic to get it smooth. Then, still not satisfied with this, I got those felt wheels and cut the very tip off the smallest one, and used a bit of flitz paste, and then went over all the borders. That got it close enough for me. You can get more advice from the Weapons Stippling group on Facebook.


After you do the borders, I use the round tip on the walnut hollow wood burner on a medium heat setting. You don't want it too hot, not with the P80 plastic anyway. My technique was to press in, not too much but just enough, and drag downwards. A random totally pattern is best, I did a somewhat orderly snake pattern and then went over it again and smeared it out to give it a more organic texture. Then I went over it one more time, lightly and fastly rubbing all along the surface to blend the ridges that were created into the rest of the texture. You can do this several times to get it just right. The result is a texture that is grippy, yet not rough. That's how I like it, but you can experiment. The key is not to heat it up too much and don't stick any of the tips in too deep, and don't try to do it perfectly ordered unless you've gotten good at that with practice and are using an appropriate tip. You can make your own tips out of #8-32 brass screws or buy blanks from OT Defense, or some other place.

u/Klaatuprime · 1 pointr/polymer80

For those of you not happy with the texture of the stock PF940 series, or you have a Readymod and don't feel up to stippling it, these things are great. They were rather easy to apply and completely covered the rough stock finish with a grippy textured rubberized grip.
I have no affiliation with them, but I just had gotten one and liked it so much I ordered a second.

u/ryanthesoup · 1 pointr/polymer80

I bought a metal stamping set, like this. But I didn't have anything to fully support the guide rod channel while I was doing it, so it looks like straight up shit. If I were to do it again I'd either take it to an engraver or buy an engraver tool.

u/hayzeus · 1 pointr/polymer80

https://www.amazon.com/UM-Tactical-UM3-Universal-Sight/dp/B00L5QZ4YU

​

Or google "frame mount optic" or "glock scope mount". There are definitely cheaper options than the UM3 -- I think I picked up one for $25 at a gun show, and put a cheap optic on it -- which held up fairly well, since it wasn't riding on the slide.

​

Be aware that you can also get mounting plates that fit into a standard glock rear dovetail, although you lose the rear sight, I use this mounting plate on my target G17 P80 with a vortex viper. The plate has been rock solid (in fact, it's probably never coming out, as the fit is extremely tight).

u/[deleted] · 3 pointsr/polymer80

Cobalt P80 PV940v2 with Concealed Carrier holster.

https://www.amazon.com/dp/B07PPD2Y4N/ref=cm_sw_r_cp_awdb_t1_PX3hDbZC17SRS

Fits all P80s just fine.

u/azhunter021 · 1 pointr/polymer80

Bought it from Amazon. The wife pick it out for me because I was undecided between 2.

Xtreme Precision 1/2-28 Stainless Fluted .710 OD x 5/8 long, Thread Protector
https://www.amazon.com/dp/B00Y1GJEP6/ref=cm_sw_r_cp_apa_i_LT6rDb09TNH4M