Top products from r/shroomery

We found 12 product mentions on r/shroomery. We ranked the 12 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/shroomery:

u/Fresh_Drip_Coffee · 2 pointsr/shroomery

Ive seen some people use a humidifier in their setup before. That may help with the moisture issue.

I've used this type before from Amazon

https://www.amazon.com/PuraSense-Ultrasonic-Aromatherapy-Essential-Humidifier/dp/B07MTTHCVV/ref=mp_s_a_1_8?keywords=humidifiers&qid=1567028923&s=gateway&sprefix=Humod&sr=8-8

But instead of putting the humidifier in the bin I pipped in the humid air using a tube from the top of the humidifier and set it beside the bin.

If you do go down this route, you might want a Bluetooth or smart version that you can set on a timer.

u/helpfiles · 1 pointr/shroomery

Almost any bulb should work ok as long as it is near the 6500k range like you've read about already.

I've used various brands of both CFL and LED lights successfully.

I eventually started using strip lights with a 12vdc power source attached the bottom side of my fruiting chamber lid.

u/beerface · 1 pointr/shroomery

No Amazon or ebay? I have something like this. Works great, gets em cracker dry. I can't get that level of dryness from a fan alone.

u/navik659 · 1 pointr/shroomery

Consider this for FAE.

TerraBloom 4" Inline Duct Fan, Quiet Energy Saving EC Motor with 0-100% Adjustable Speed Controller. 160 CFM, 18W. Ventilation for Grow Tents, Odors Exhaust, Heating and Cooling Duct Booster. https://www.amazon.com/dp/B07JNGS2V7/ref=cm_sw_r_cp_apa_i_gWcSDb5DQ5T3H

This for underneath the chamber.

Camco Front-Load Washing Machine Drain Pan, Protects Your Floor from Washing Machine Leaks, OD 30.5" x 34.5" x 1.64" (20786) https://www.amazon.com/dp/B00EOX2IRW/ref=cm_sw_r_cp_apa_i_NXcSDbM2J1N3T

u/ShinmaNiska · 1 pointr/shroomery

CaviCide is pretty damn good.

But then again so is ISO.

u/shroomigator · 1 pointr/shroomery

Those are the jars you want. I would recommend getting a punch to make the injection holes in the lids https://www.amazon.com/ABN-Power-Punch-Heavy-Duty/dp/B07D7HJQ5Z/

u/mopsockets · 2 pointsr/shroomery

Buy an Audobon myco id book and look for deadly/noxious lookalikes in your area. Do a spore print if it's not too dry yet. Check the book for other info. Don't (don't) ask the internet if you should eat something. It's very dangerous!
https://www.amazon.com/dp/0394519922/ref=cm_sw_r_cp_apa_i_udIDDbVAT1XYR