Top products from r/snes

We found 74 product mentions on r/snes. We ranked the 160 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/snes:

u/HappierShibe · 2 pointsr/snes

I can post a list of options here, I use them to test rom images before I load them to my repro carts:

Super UFO 8 (30-50 USD) :
Cheap, and basic, get the job done. Works with most clones. Uses software from about a million years ago; no, I'm not joking. It runs the same software that was on the old late 90's floppy readers updated to work with more modern hardware.
You have to be careful with savegames, there are some extra steps involved. Does not support ANY games that require specialized chips. Also, it smells funny (it has a strange chemical odor that never completely goes away). Theres a ton of these out there under a dozen or so different names, but if they are in this price range this is probably what your getting.
http://www.amazon.com/Saves-Backup-Cartridge-Adapter-Nintendo-Super/dp/B007O3MWVG/ref=sr_1_1?s=videogames&ie=UTF8&qid=1422038684&sr=1-1

Super everdrive (~150 USD):
Good interface and all the basic functionality is there and it works pretty much how you would expect. Works with some clones, but its a bit of a crapshoot. CAN support DSP-1 games if you have a dsp-1 chip installed on it (extra cost but worth it). Supply on these runs out sometimes, then they cost more for a bit. Doesn't smell funny.
http://www.stoneagegamer.com/super-everdrive-deluxe-na.html

SD2SNES (200-300 USD):
Creme-de-la-creme, all the basic functionality is there, and it has some nice bells and whistles. Solid interface. DOES NOT WORK RELIABLY WITH CLONES! USE A GENUINE SNES! Supports pretty much every special chip except for the SuperFX. Pricy, occasionally in short supply but generally you can get ahold of them without TOO much trouble. Doesn't smell funny.
http://www.stoneagegamer.com/sd2snes.html

I have or have worked with all 3 of these. feel free to ask if you have any other questions.

u/Sw1mm1ngB1rd · 2 pointsr/snes

Just ran into this conundrum myself. Bought a SNES Classic and wanted to get a wireless controller for it: This one to be exact. Unfortunately it was lag-tacular, (probably a 1/4 second delay, but enough to be irritating on platformers like MegaMan X and Super Metroid).

​

Returned it, and picked up this and this instead. The difference is night and day, and the controls are super snappy and responsive. Picked up the regular SNES adapter version as well and it works like a charm too.

u/DamnRandall · 2 pointsr/snes

I know people like the XRGB but it's a bit pricey for me.

I use this: http://www.amazon.com/gp/product/B00988GMLG/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
Works great for me. I just had to buy a SCART cable for my SNES. Also ended up working great for my old Japanese PS2 in allowing me to play rhythm games on an LCD without introducing unbelievable lag from upscaling.

u/fallowfellow · 1 pointr/snes

Unfortunately the closest you could come to getting a cart like what you're asking for would be to jury-rig an adapter like: https://www.amazon.com/Retro-Bit-Super-Retro-Advance-Adapter-nintendo/dp/B00EXPCTQQ/ref=cm_cr_arp_d_product_top?ie=UTF8 ... with a Minish Cap board inside a SNES cart... BUT ... unlike a Super Gameboy conversion of Link's Awakening which works great like I just described (I own one myself!), that adapter does NOT provide video/audio out to the SNES... so it'd be a frankenstein looking abomination. :P

u/branewalker · 2 pointsr/snes

Then you want this.

It's nearly identical to an original SNES controller. I have only two complaints:

  1. No extra buttons to map things like save/load state or fast forward onto. So I play SNES RPGS on my Xbox controller, when the D-pad doesn't matter. Obviously, if you're playing in front of your computer, keyboard shortcuts are fine as long as you're not lazy. Or if you're playing NES or TG-16/PC-Engine games, you have extra buttons to play with, but that doesn't really help you on Super Metroid.

  2. Right out of the box, the D-pad was a little sharper than I remembered. maybe my old SNES pads were worn down from years of play. I dunno. I used an nail file to round them down a bit, and it's perfect now.
u/Grantagonist · 2 pointsr/snes

A good emulator is just about as good as playing the SNES itself. Certainly just as good as the Virtual Console, which is just another emulator.

You can get a SNES controller adapter if you want to use an authentic controller, or the iBuffalo gamepad feels pretty close.

u/WrestlingWoo · 14 pointsr/snes

so...........i would emulate first. Get a USB SNEScontroller and try some games.

If you love it and can't get enough I'd look into getting original hardware. But if you don't have that need to play it all on original hardware on a CRT TV then emulation is a good place to start.

u/Hougaiidesu · 2 pointsr/snes

I use these, I love them. They're RF instead of IR, works much better. You can also find 2 packs online for pretty cheap.

Extension cables work too, I have those as well.

http://www.amazon.com/SuperRetro-Wireless-Controller-Solo-RETROBIT/dp/B00823PWUK/ref=sr_1_2?ie=UTF8&qid=1416454852&sr=8-2&keywords=wireless+snes

u/OneBagTravel · 3 pointsr/snes

>but I payed 5 bucks for this one

Yikes. That cart is in shambles. It's still salvageable but wow, what a mess.

Read up on cleaning contact pins here. Finally based on the first picture, I'd clean the console as well.

Edit: if 90% alcohol and swabs don't fix the issue, I advising purchasing some Mr Clean Magic Erasers and buff out the tarnish and any remaining rust from the contacts. Invest in the security screw bits so you can get into your console and games.

u/yeeah_suree · 1 pointr/snes

Some people on here seem to use ROMs, but I think a majority of us like to have the carts. I have a USB SNES Adapter and frequently test out games on emulator, and when I find a game I like I buy it on cart.

It just feels better playing on the console, and there's a pride to having a collection. That being said I don't think there's too much hate for ROMs, but they are illegal and don't give you the full retro experience IMO.

Ask for your second question, I enjoy watching some snes videos but I'd prolly rather just play the game myself.

u/xxdil111xx · 3 pointsr/snes

I use this Scart to HDMI converter
Scart Hdmi to Hdmi Video Converter Box 1080p Scaler 3.5mm Coaxial Audio Out https://www.amazon.com/dp/B00MUNIVRO/ref=cm_sw_r_cp_api_2VJ5ybHXC0RNV

Here is a scart cable. You can search for online retailers that'll have higher quality ones, but figured I send you this link as well.

Gam3Gear RGB Scart Cable for SNES GameCube N64 NTSC https://www.amazon.com/dp/B01N8RCWK9/ref=cm_sw_r_cp_api_MWJ5yb9EVJ8S2

I've been using this converter and haven't had any issues and I'm so impressed with the picture quality in my 55" tv

Edit: this will be the best jump in quality from a S-Video. There are other upscalers out there that do an even better job, but expect to drop a couple $$$ dollars on those.

u/Dweezicus · 2 pointsr/snes

I use the 8bitdo retro receiver which I sync with a Wii remote, and then I plug the snes classic controller into the Wii remote. Works like a charm, and it allows me to play “wireless”:

8Bitdo SNES - Adapter - Bluetooth SNES Retro Receiver - Super NES https://www.amazon.com/dp/B01K1T9CZS/ref=cm_sw_r_cp_api_EIGIAbN11HH7F

u/[deleted] · 6 pointsr/snes

If you've got the original SNES controlers, I recommend the SNES-to-USB adapter which works great with my two original ones and my ASCII pad.

u/hotfartz · 11 pointsr/snes

I use the Buffalo USB snes controller. I got it off Amazon for around 10 bucks. Feels like I'm playing with an original snes controller.

Edit: Buffalo Classic USB Gamepad for PC https://www.amazon.com/dp/B002B9XB0E/ref=cm_sw_r_cp_apa_yh-Eyb9KR28PQ

Looks like its 18 now. Still worth it in my opinion.

u/LeftoverNoodles · 1 pointr/snes

Messiah SNES Wireless Controllers are fantastic. They will run you $100ish on Ebay. It's a bit thicker than a normal SNES controller. It uses micro switches so it's a little softer, but a lot more durable. While that looks like an analog stick, it's really more of a hat over 4 switch d-pad. Overall it matches the size and shape near perfectly and it's hands down the best wireless snes controller solution.

RetroBit the Retro Duo guys make another wireless controller. It's got a weird shape, buttons in he wrong place, a crap d-pad, and it will miss button presses through crossed legs. It's such crap that even RPGs are a bitch to play.

Before you cheap out and buy the Retroport one or decided and go the emulator route, I will tell you that the Messiah controller is easily worth twice the going rate in terms of getting a quality classic SNES experience.

u/Sirotaca · 5 pointsr/snes

Make sure that's 10V DC, not 10V AC. The SNES needs DC. You also need to check polarity; the SNES is center negative. The barrel size is a bit unusual as well, so it may or may not fit. Third-party power supplies are often 9V DC, which is also fine.

For video, most new TVs still have composite video inputs (yellow, white, red RCA jacks), so you can just use that if you're not too picky about video quality, though input latency might make the games more difficult than they should be. If you want a higher quality solution, I'd suggest picking up a RetroTINK-2X to upscale the SNES to HDMI (they're sold out right now, but should be back in stock soon). S-Video cables are cheap and work with the RetroTINK-2X and give you pretty good quality. It's possible to get even higher quality than that, but it gets more complicated and expensive.

u/Technobesity · 1 pointr/snes

You should grab a nice SNES style USB controller too. I recommend 8bitdo’s controller for $25. They’re a good brand. It will connect to your computer through a USB cable and wirelessly if you ever use it on a SNES Classic Edition. A cheap option is this one I picked up for $6. It’s actually not too bad either.

u/Doomguy504 · 2 pointsr/snes

I use of of these adapters and my old snes controllers and it works perfectly. Highly recommended if you want to keep the feel of the original controllers.

u/RazorLeafAttack · 1 pointr/snes

I don't know whether s-video will work for you, but I will say I've had good luck with this cable: https://www.amazon.com/gp/product/B00LE3EAIK/

u/Efriim · 1 pointr/snes

Yeah if it is convenient, it's fun either way.

You will need a 4.5mm Gamebit screwdriver to open a SuperNES One that has a long and skinny neck(actualname?) like this https://www.amazon.com/Security-Screwdriver-Nintendo-Consoles-ninthseason/dp/B01ECGHJX8/ref=sr_1_8?keywords=gamebit+4.5mm&qid=1555178666&s=gateway&sr=8-8

​

Alternatively.

You can mold one out of a pen.

Find a pen that is relatively hard plastic and skinny enough to fit into the holes on the back of the supernes.

Take the ink out and dispose of it so you have just the pen tube.

Find a lighter.

If you have some sort of handkerchief or glasses you can use it as a mask, else get ready to hold your breath.

Prepare to melt the end of the pentube by applying heat to it with the lighter, careful not to set it on fire.

and prepare to insert the melting end into the back of the Super NES over the screw.

Execute what you prepared for, you might feel a squish of the melted plastic on the screw, and wait a good minute and a half for the pen to dry and harden over the screw,

this may take a few tries, but if you are careful enough turn slowly to drive the screws out.

u/asdfqwer426 · 1 pointr/snes

I've got one of these types of controller/USB adapter things for N64 controllers, and am pretty happy with it.

u/thankyouforfu · 2 pointsr/snes

First off, you can get a controller extension cable to add 6ft (or get two and add 12ft). Anyways, I recommend getting one of the new ones UndeadArgos recommended because they're the easiest to find.

u/ArmorOfGod7 · 1 pointr/snes

Take this one for example: https://www.amazon.com/Gam3Gear-Nintendo-Gamecube-Video-Cable-Super/dp/B00LE3EAIK/ref=sr_1_2?keywords=snes+s-video+cable&qid=1555157325&s=gateway&sr=8-2#customerReviews


Overall, the reviews are pretty solid. But the top rated review points out some cheap design and claims it's not much different in terms of quality as an official composite cable.

u/bene01 · 1 pointr/snes

I got the 8Bitdo SN30 2.4G in March. This is the non-Bluetooth version. Controller and receiver together for $25 on Amazon.

https://www.amazon.com/8Bitdo-Wireless-Controller-Classic-super-nintendo/dp/B074HBNNH6

Got two and they've been working great (about 2 months so far).


u/Trilkhai · 2 pointsr/snes

> Have you thought about setting up a small PC instead? or even a long HDMI cord from your main PC to TV.

That's what I'd recommend, too. I've tried a ton of SNES emulators, and the nicest experience I've had in terms of features, compatibility & graphics was Mednafen through the Mednaffe frontend, using my iBuffalo repro of the SNES controller + turbo.

u/Cowslappa · 2 pointsr/snes

A converter like this would work, but I wouldn't expect the picture to be godlike:

http://www.amazon.com/Tmvel-HDMI2RCACVS-Composite-Converter-Blue-Ray/dp/B009A6PJKQ/ref=sr_1_1?s=electronics&ie=UTF8&qid=1419053295&sr=1-1&keywords=av+to+hdmi

Or you can always use a capture card like a dazzle and play through amarec or another capture software, but there's a little bit of delay.

u/cueball1897 · 2 pointsr/snes

I second the Buffalo controller, although the branding on mine says iBuffalo. The D-pad feels good and I like the SFC colored buttons...and it's cheap.

https://www.amazon.com/BUFFALO-BSGP815GY-Classic-USB-Gamepad/dp/B06XWD8QQJ/ref=sr_1_1?ie=UTF8&qid=1502537126&sr=8-1&keywords=ibuffalo

u/Sarothias · 1 pointr/snes

Not sure how much this could help you since you are in Canada but maybe they ship there? IDK. I've ordered them from the NA Amazon and they work well. Sometimes they have to be pushed out a wee bit for the cartridge to slide in but otherwise they work well enough and are cheap I think. These are 6 covers for 7 USD. I haven't checked the ebay prices though.

https://www.amazon.com/Super-Nintendo-Cartridge-Dust-Cover-Global/dp/B003Y7RB76/ref=sr_1_2?ie=UTF8&qid=1501518855&sr=8-2&keywords=snes+dust+cover

u/mrpopsicleman · 1 pointr/snes

Then the next cheapest adapter option that requires no modification at all is a Nakitek Game Saver + which will also allows you to save state your games. Alternative adapters would include the Innovation Super 8 (NES/Famicom adapter) and the Super UFO Pro 8 (an SD card based flash cartridge based on the old floppy disk copiers), but for the price that those two are going for these days, it would be much cheaper to get a SFC.

u/nylan8301 · 5 pointsr/snes

For me, I would rather get the Super Famicom box art book.

While more of a coffee-table book, I really enjoy the artwork on SFC games.

u/DigitalSlim · 1 pointr/snes

There have been several threads on this over the past year or so, and this one always comes highly recommended:

http://www.amazon.com/MT-VIKI-AV-Splitter-Selector-Switch/dp/B00DRGDBTG/ref=sr_1_2?ie=UTF8&qid=1392184555&sr=8-2&keywords=av+switch

I have one myself and it works flawlessly. I recommended it to a couple friends and they've had no issues at all.

EDIT: don't let the picture freak you out...it's not that big. The picture is showing a unit sitting on top of another one (one shot of the front (buttons), one of the back (inputs)

u/warrensr3 · 1 pointr/snes

It could possibly be that your cord is bad. Amazon sells replacement ones for 5 dollars. Considering Nintendo used the same AV cord for 3 generations they're pretty easy to get a hold of. http://www.amazon.com/Nintendo-AV-Cable-Bulk-Packaging-Super/dp/B000035Y6B

u/UndeadArgos · 2 pointsr/snes

I like this one: http://www.amazon.com/gp/aw/d/B00823PWUK?pc_redir=1414332641&robot_redir=1

The d-pad isn't perfect bit it's not the worst I've used. There's a tradeoff in precision control but I think its worth it.

u/dodland · 2 pointsr/snes

People might say this is a janky way to do it, but I successfully replaced the battery in a Final Fantasy III cart with NO SOLDERING. I just used electrical tape. Worked fine. Just wrap it up really tight..

edit: you need a screwdriver bit to open the case, and these batteries

u/AustinDontthink · 18 pointsr/snes

Just use an original SNES controller! Get one of these to convert it to USB. Been doing this for years, works amazingly!

u/Padankadank · 1 pointr/snes

3.8mm + 4.5mm + trigram triwing Security Screwdriver Bit Tool Set For Nintendo NES SNES N64 Game Boy Vintage Games and Consoles by ninthseason https://www.amazon.com/dp/B01ECGHJX8/ref=cm_sw_r_cp_api_i_NCHvDb7PP3V2R

u/moon_patrol · 1 pointr/snes

I don't know if this could help. I once had a usb adapter and it worked pretty well, but I'm not a high speed player, maybe these controllers add input latency and I just didn't noticed it.

u/montrevux · 4 pointsr/snes

they sell these on amazon, btw.

this model is the 2.4ghz wireless usb one, though. no bluetooth support, and only works with the controller port on the nes/snes classic.

there are bluetooth models - these new ones come with a bluetooth receiver that plugs into the snes.

u/LukeorLucas · 1 pointr/snes

Tototek/Gamejoy adapter

Retro-bit Super Retro Advance

Both seem to be out of stock right now but I did see one on eBay

u/biscodiscuits · 2 pointsr/snes

http://www.amazon.com/Nintendo-AV-Cable-Bulk-Packaging-Super/dp/B000035Y6B

$4 and you get an RCA cable.

Switch boxes are nice, but are going to cost you more, and don't they usually just switch the signal, not convert the signal? As in, RCA in = RCA out? I am not sure they will change the signal to another type unless you buy a specialized box.

u/AsixJin · 1 pointr/snes

I believe using their SNES receiver allows you to use the left analog for movement.

https://www.amazon.com/ask/questions/asin/B01K1T9CZS/ref=ask_mdp_dpmw_ql_hza?isAnswered=true

u/Nerdz · 1 pointr/snes

I'm from Canada as well and paid around $21.00 each earlier this month.

I just received them and played some Killer Instinct to try them and I was able to perform all my combos without any issue.

https://www.amazon.com/dp/B002B9XB0E/ref=cm_sw_r_cp_apa_yh-Eyb9KR28PQ

u/ins4n1ty · 2 pointsr/snes

This is the one I use here. It's given me no issues whatsoever.

u/mistertimely · 2 pointsr/snes

I'm the opposite. Use HDMI from Scart. I had this adapter for over a year before changing to a Framemeister. That first adapter worked fine, no noticeable input lag on my HDTV and a huge upgrade form composite. But, definitely no regrets on upgrading to the framemeister.

You should check out the My Life in Gaming series on RGB, starting with RGB 101. Here