Top products from r/snesclassicmods

We found 8 product mentions on r/snesclassicmods. We ranked the 7 resulting products by number of redditors who mentioned them. Here are the top 20.

Next page

Top comments that mention products on r/snesclassicmods:

u/ZeroOneenOoreZ 路 2 pointsr/snesclassicmods

I've tried this one on my first attempt and it simply just doesn't work with the snes mini.

Instead of that one try this:
https://www.amazon.ca/Adaptor-TUSITA-Charging-Adapter-Raspberry/dp/B00LTHBCNM/ref=mp_s_a_1_17?keywords=usb+otg+cable&qid=1565822608&s=gateway&sprefix=usb+otg+&sr=8-17

This was the one I ended up purchasing and works like a charm. Supplies power, allows additonal usb storage, and has the ability to add player 3 and 4.

u/Kieran_Mc 路 1 pointr/snesclassicmods

How much memory have you got free on the system? IIRC each suspend point takes up 2-4mb of space (due to the rewind feature), so if you've got loads you might not have the space, crashing the system. Do savestates still work in the emulator itself?

Edit: if that is the case you can get 2 way 90 degree angle USB sticks that can expand the systems memory significantly, you stick them in the where you'd plug the power in and plug the power into the stick. Just make sure you get one with the right connector and is bent the right way so it doesn't obstruct the hdmi.

Cablecc 90 Degree Right Angled Micro USB 2.0 OTG Host Adapter with USB Power for Galaxy S3 S4 S5 Note2 Note3 Cell Phone & Tablet https://www.amazon.co.uk/dp/B00S6AAXRG/ref=cm_sw_r_cp_apa_i_wKIvCbT9EPE6X

Think this adapter is the one I'm thinking of, you'd need to stick a USB stick in it though.

u/stockcar1515 路 1 pointr/snesclassicmods

Thanks for the picture...unfortunately, it's not clear to me exactly what you are trying to accomplish. Are you simply trying to run things off of that usb stick? If so, this setup looks needlessly complicated. All you'd need is one of these: https://www.amazon.com/Yonisun-Micro-Samsung-Phones-Tablets/dp/B00JCZ2FQQ/ref=sr_1_17?ie=UTF8&qid=1541713088&sr=8-17&keywords=micro+usb+otg+adapter.

​

Or perhaps, I'm just not understanding fully.

u/[deleted] 路 2 pointsr/snesclassicmods

Those hubs are known for their spotty build quality. There may be a broken solder or wire on the inside of the hub. You may be able to repair it with a quick solder, if you are into that sort of thing.

I use these. The build quality is much better, but there is only one USB port. https://www.amazon.com/AuviPal-Micro-USB-Cable-Power/dp/B07FY9Z9GD

u/cmarciniak93 路 1 pointr/snesclassicmods

UCEC Micro USB OTG Adapter - A Female to Micro - Micro Female Charging for Hard Disk https://www.amazon.com/dp/B00WO4CDKA/ref=cm_sw_r_cp_apa_i_-ybvDbNKAZ8XP this is the one I used with a USB stick

u/JW_Pepper_Sheriff 路 3 pointsr/snesclassicmods

400GB should work. I run 256GB SanDisk microSD's in five Nintendo Classics with zero issues. I find 256GB is way too large so not sure what you'll do with 400GB, but at that size, Now You're Playing With Power!
Here are my card specs. Any faster and the microSD card is more than the Classic can handle so it would be wasted $. https://www.amazon.com/dp/B0758NHWS8?ref=ppx_pop_mob_ap_share