Top products from r/vwgolf

I have one of these Bluetooth adapters in my Mazda. It plugs in to the aux input and it has physical buttons and a microphone on a small unit with a magnetic release that you put somewhere convenient. You could connect either your Android or your iPhone to it and then the other phone to your car's Bluetooth. It's a kludge but maybe it will accomplish what you need.

I was told that my 2017 Alltrack would accept two simultaneous Bluetooth connections, but that appears to be incorrect. Interestingly, the instructions for that Bluetooth adapter also say that two simultaneous connections are possible, but I haven't been able to get it to work either. Bluetooth is just bad.

https://www.amazon.com/gp/product/B000CN72G0/ref=ox_sc_act_title_3?smid=ATVPDKIKX0DER&psc=1

These are the ones I have, Took me an hour total to swap and I cleaned everything up too.

I am also running the poly control arm bushings, ~$30 on amazon, also I nice improvement and easy(ish) install

In my MKV this has been working well for me the last six months since I've bought it:

Wizgear Vent Magnetic Mount

My phone has a slickwraps skin and I have a clear case. I just dropped one of the plates in at the bottom so it doesn't interfere with wireless charging and haven't had any problems yet.

I bought this one and it has held well so far, just over 10000 miles...there are nicer ones out there
https://www.amazon.com/Dewhel-License-No-Drill-Modification-Volkswagen/dp/B072X38K53/ref=sr_1_1_sspa?crid=13K0EZI098HRG&keywords=golf+mk7+license+plate&qid=1555707208&s=gateway&sprefix=Golf+mk7+li%2Caps%2C161&sr=8-1-spons&psc=1

[Ultima] Smoked Lens Dynamic Sequential Blink LED Side Mirror Turn Signal Light Strip Assembly For 2015+ Volkswagen Golf GTI MK7 R VII https://www.amazon.com/dp/B07SRD8BL4/ref=cm_sw_r_cp_apa_i_yxooDbYG0F66H

Here are the ones I got. Not hard to install at all! But be careful when trying to take your mirror cover off, cause I chipped my passenger mirror. Nothing too noticeable, but it's noticeable to me.

https://youtu.be/-IcJqSPQ9nw

Here is the video that helped me remove the cover. Other than the cover, it's two t10 screws and a little bit of elbow grease to get the lights out. The package came with a t10 screwdriver and a bone tool, which helped out a ton! It took me about an hour to install both.

It’s not too difficult, you’ll need a trim tool set to get the boot out, some pliers to snap off a little metal ring holding the old knob on, and a zip tie to keep the leather in place.here’s the link to the adapter that sits on the end of the rod. The rest is just a matter of drilling a hole in whatever thing you want as your shift knob and screwing it on

No, get rid of the VW badge. Like this.