Reddit reviews 3D Solutech ST175CLPLA Natural Clear 1.75mm 3D Printer PLA Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG), Silver
We found 8 Reddit comments about 3D Solutech ST175CLPLA Natural Clear 1.75mm 3D Printer PLA Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG), Silver. Here are the top ones, ranked by their Reddit score.
1.75mm see through white pla filamentFor common 3d printers such as makerbot, RepRap, afinia, up, Mendel, flash forge, solidoodle 2, printrbot lc, makergear m2 and etc.Temperature range is 190 degree C - 220 degree C
https://smile.amazon.com/gp/product/B00MB3CV6K/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
I used 3D Solutech Natural Clear 1.75mm PLA, https://www.amazon.com/gp/product/B00MB3CV6K/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Its this one -- https://www.amazon.com/gp/product/B00MB3CV6K/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
I used https://www.amazon.com/3D-Solutech-Natural-Printer-Filament/dp/B00MB3CV6K/ref=sr_1_4?ie=UTF8&qid=1492775092&sr=8-4&keywords=3d+solutech to print http://www.thingiverse.com/thing:2186153 and was very pleased with the results.
3D Solutech Natural Clear 1.75 mm 3D Printer PLA Filament 2.2 LBS (1.0KG) - 100% USA https://www.amazon.com/dp/B00MB3CV6K/ref=cm_sw_r_cp_apa_KA5KybXTCRJ3E
I don't have any transparent filament, but if you want to pay $20, I can buy this (it's 19.65 after tax) and print it. Otherwise, I'll print it for free. I have blue, orange, and white already.
Thank you so much for the reply! The filament is a couple weeks old now, but is a transparent PLA, the other filament I was having similar issues with was a black PLA+. I had originally thought it was a nozzle issue, so I actually just replaced the nozzle with a hardened steel 0.4mm nozzle. I just picked up some standard Inland Gray PLA, so I will give that a shot and see if I see similar results or not (maybe it is just the filament)
The filament I was using is https://www.amazon.com/gp/product/B00MB3CV6K/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
Some possibly relevant notes: This was printed at 210, I tried printing it at 205 (that caused layer adhesion issues) but noticed even at 210 I was getting weak layer adhesion,, so I upped it to 220 which seemed a bit better, and while I'm still seeing stringing, at least its adhering a bit better, but still pretty brittle.
There is, but by what I hear it's pretty finicky. You can also print in different types of nylon and other rubbery materials.