Reddit reviews 3M 1080 CF12 Black Carbon Fiber 3in x 5in (Sample Size) Car Wrap Vinyl Film
We found 3 Reddit comments about 3M 1080 CF12 Black Carbon Fiber 3in x 5in (Sample Size) Car Wrap Vinyl Film. Here are the top ones, ranked by their Reddit score.
Sample Size will be labeled to identify product, color & finish. Samples are 3in x 5inWhen heated and stretched it can be applied to extreme curved surfaces with a little patience and work.The film is coated with a UV protective layer which lasts up to 5 years outdoors.Once applied and bonded to you surface you may clean it and polish it with any type of cleaning agent that is used for painted surfaces.Rapid Air adhesive needs to be applied dry and can be re lifted, repositioned and stretched before going over with a squeegee.
I would use a different type of tape and cover the whole thing.
Here is a car wrap sample that should work. Just test it before you apply it.
You can get colored duct tape which would hide the edges of the charger a bit.
If the charger is too thick, you could trace it and cut the dot view case to make a divot for it and then cover it with something.
My main concern is that the reason it fails when placed inside the case could be a physics quirk. The thick Al body may throw off the induction coil. This would explain why they did not build one in the phone in the first place. So modding the case may not work.
Maybe try putting something between the phone and the charger, and then put the case on. Many people keep 20$ in their case for emergencies, and the folded bill could get the coil far enough from the Al body to let it work.
You would most likely have to disassemble the screen to get to the back of the casing in order to pop it out. I'd say to just cover it with a piece of vinyl.
You could get some in plain black or get a carbon fiber pattern which I think would look nice.
http://www.amazon.com/SAMPLE-3M-Carbon-Scotchprint-Series/dp/B00DJF2W8G
Here is the mobile version of your link