Reddit reviews Blisstime 6 String Acoustic Guitar Bone Bridge Saddle and Nut and 6pcs Guitar Bone Bridge Pins Made of Real Bone
We found 2 Reddit comments about Blisstime 6 String Acoustic Guitar Bone Bridge Saddle and Nut and 6pcs Guitar Bone Bridge Pins Made of Real Bone. Here are the top ones, ranked by their Reddit score.
Bone nut size:43mmX6mmX8.5mmBone saddle size:72mmX3mmx9mm6pcs Guitar Bone Bridge Pins:Length:30.8mm/1.21inch;Diameter of the head:7.6mm/0.31";Skirt /collar : 5.33mm/0.21";End of post: 3.4mm/0.13"; Length of post: 23.7mm/0.93";Dot's dimension: 3.2mm/0.13"Made of real cattle bone, which can offer a better tone than plastic.Package include:6pcs Guitar Bone Bridge Pins+1 pcs Folk Guitar bone nut ( 43mmX6mmX8.5mm)+1 pcs Folk Guitar bone saddle(72mmX3mmx9mm)
It looks like you need saddle and bridge pins, you can buy these online and try to DIY. I recently replaced my acoustic's nut and saddle without a problem.
You will probably need to file the under side of the saddle with sandpaper if the action is too high. There are several youtube videos that show you how to replace and adjust the saddle. Here is one: https://www.youtube.com/watch?v=LbAGQk8iyNE
There are some kits that already include saddle, nut and pins like this one https://www.amazon.com/Blisstime%C2%AE-String-Acoustic-Guitar-Bridge/dp/B018SA2CPE.
Or since you don't need the nut, you can also buy the saddle and pins separately.
I bought this one for about $13.
smile.amazon.com/gp/aw/d/B018SA2CPE/ref=mp_s_a_1_6?ie=UTF8&qid=1505795105&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=guitar+bone+saddle
Yes, I did it myself. It's pretty easy. The hardest part is adjusting the height for a low action. Basically you just run it over sandpaper until enough material is removed. It's just a long process. It sands very easily, but you want to check your progress very frequently to ensure you don't take too much off and that you are sanding evenly.