Reddit reviews EZ 30-4W 4" Stand Off Wall Mount for up to 2" Mast - W Style Antenna Bracket
We found 1 Reddit comments about EZ 30-4W 4" Stand Off Wall Mount for up to 2" Mast - W Style Antenna Bracket. Here are the top ones, ranked by their Reddit score.
HIGH QUALITY "W" TYPE BRACKET IS DESIGNED TO MOUNT 1" - 2" ANTENNA MAST TO WALL2 MOUNTS PER KIT (AS SHOWN)WILL STAND OFF WALL 4"MADE OF 1-1/4" WIDE X 12 GAUGE GALVANIZED STEELASSEMBLY HARDWARE IS INCLUDED.
use a channelmaster CM-4228HD mounted on a mast beside your house.
https://www.amazon.com/gp/product/B000FVVKQM
for a mast use 3 chain link fence rails bolted together at the joints
https://www.lowes.com/pd/Galvanized-Steel-Chain-Link-Fence-Top-Rail/999989216
the antenna clamps to the top of the mast with the U bolts supplied with it and the mast itself in mounted to a base concreted into the ground
use a chain link fence terminal post as the base
https://www.lowes.com/pd/Common-2-3-8-in-x-2-3-8-in-x-6-ft-Actual-2-37-in-x-2-37-in-x-6-ft-Silver-Galvanized-Steel-Chain-Link-Fence-Terminal-Post/999990200
the terminal post is set into concrete inside a sono tube cut in half so it is 2 feet long
https://www.lowes.com/pd/Sakrete-Common-8-in-Actual-7-5-in-48-in-Concrete-Tube-Form/3037032
1 80 pound bag will fill 1 foot of 8" sono tube so you will need 2 bags total
https://www.lowes.com/pd/Sakrete-80-lb-High-Strength-Concrete-Mix/3099141
you will need a mounting bracket to hold the mast in place against wind
https://www.amazon.com/EZ-30-4W-Stand-Wall-Mount/dp/B010GFY2JS/
mount the bracket to the face of your roof directly over where you want the antenna mounted
use a post holer and make a hole 2 feet deep directly under the opening of the bracket attached to the eave of your house, sink the tube into the hole and fall with concrete
push the terminal post into the concrete and through it 1 more foot so that 3 feet is above ground while making sure it is aligned with the bracket and as vertical as possible.
allow the concrete 2 or 3 days to cure then assemble the antenna and mast in your yard being sure to bolt the sections together securely
attach your antenna to the top of the mast and zip tie your coax cable to the mast making 2 drip loops on the line one at the top and another at the bottom.
stand the mast upright and put it into the base.
go to https://www.tvfool.com/index.php?option=com_wrapper&Itemid=29
and put in your address it will show you compass directions and distances to broadcasting towers your AGL is 30 feet.
turn the antenna face so its pointing in the direction of the largest grouping of channels.
of you have channels in multiple directions you can mark the mast with a line and mark the base mount with lines directing you towards station groups then turn the mast as needed to bring in different stations.