Reddit reviews Monoprice 121711 Select Mini 3D Printer V2 - Black With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models
We found 14 Reddit comments about Monoprice 121711 Select Mini 3D Printer V2 - Black With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models. Here are the top ones, ranked by their Reddit score.
The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament, from basic filaments, such as ABS and PLA, to more advanced materialsCompact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk.Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory.We even include a MicroSDTM card with preinstalled models, so you can start printing right out of the box!PC and Mac compatible. Compatible with Cura, Repetier, and other software.Max. Extruder Temperature: +482°F (+250°C)NOTE: Check User Manual in Technical Specification before use. Maximum Power Consumption 120 WattsBuild Volume: 103.8 cu-in (1728 cc)
Heard good things about this one. ~NZ$400 after shipping and whatnot. Monoprice have a newer cheaper one, the Mini Delta, about to be released, but it's not on Amazon yet and their own shipping charges are significantly higher. The good thing is that both of these ship already assembled, unlike some 3D printers.
Seriously love this guy, and it wont break the bank.
Paying someone to do the full set will definitely run you more than the cost of this printer. It's the printer I have. It's a bit finnicky, but the price is right, and it prints well enough for me! I'd also highly recommend getting a glass bed for it. It's stupid easy to install the glass bed (you just lower the normal bed and clip the glass to it with binder clips), and it makes the prints come loose soooo much easier. You can also have a hardware store cut the glass for you and it will be a bit cheaper than that Amazon link.
I will say, though: I only recommend buying a 3D printer if you're willing to devote some time to it. It's not like an InkJet where you plug it in and it just works. It takes calibration, and learning which settings work best. You'll have to do some research to get the best quality for your prints.
This one is close. $220 and should be pretty familiar.
Monoprice Select Mini
https://www.amazon.com/Monoprice-Select-Printer-Heated-Filament/dp/B073ZLSMFT/ref=sr_1_1_sspa?ie=UTF8&qid=1527629374&sr=8-1-spons&keywords=monoprice+3d+printer&psc=1
Ender 3 is fantastic and relatively cheap but if you’re on a really tight budget you could go with the Monoprice Select Mini v2 but you’ll have to use a version of the files modified to fit.
This will print it and can be bought for less than $200
$60 even here!
info available here - https://www.amazon.com/gp/product/B073ZLSMFT/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Monoprice Select Mini 3D Printer with Heated Build Plate, Includes Micro SD Card and Sample PLA Filament - 121711 - Black
https://www.amazon.ca/gp/product/B073ZLSMFT/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=thebigaawes06-20&linkId=ed9c49199f5a2e54a63b814462488ec7
https://images-na.ssl-images-amazon.com/images/I/61Kd3AteCjL._SL1200_.jpg
HATCHBOX 1.75mm White PLA 3D Printer Filament - 1kg Spool (2.2 lbs) - Dimensional Accuracy +/- 0.05mm https://www.amazon.com/dp/B00J0GMMP6/ref=cm_sw_r_cp_apa_i_EBHPCb8CJ9QV2
Its only $20 and you could crank out a lot of minis at high quality. I'm not familiar with other printers other then my monoprice mini v2. So i can't attest to the quality/price. If you're interested in just minis for now then i would honestly get: Monoprice Select Mini 3D Printer V2 - Black with Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament and MicroSD Card Preloaded with Printable 3D Models https://www.amazon.com/dp/B073ZLSMFT/ref=cm_sw_r_cp_apa_i_nFHPCb6W5JNDZ
Its print ready right out of the box and user friendly. Lots of mods to do and lots of youtube videos to guide you along the way, a great beginner's 3d printer. Plus it doesn't break the bank.
Have a look at the MP Select Mini
Is the Monoprice select mini a good printer for a beginner? Specifically this one:
https://www.amazon.ca/dp/B073ZLSMFT/ref=cm_sw_r_cp_apa_4YQTAbRCYEVB5
[Monoprice Select Mini 3D Printer V2 - Black with Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament and MicroSD Card Preloaded with Printable 3D Models] (https://www.amazon.com/dp/B073ZLSMFT/ref=cm_sw_r_cp_apa_3DsOBb6GV9BJV)
This one?
If you want a beginning printer go with Monoprice select mini v2. It has a small printing bed but it has good quality and is easy to set up. I got mine from here for $190 or you could get one off the official website.
Yea of course, i have the [MP Select Mini v2](Monoprice Select Mini 3D Printer V2 - Black With Heated (120 x 120 x 120 mm) Build Plate, Fully Assembled + Free Sample PLA Filament And MicroSD Card Preloaded With Printable 3D Models https://www.amazon.com/dp/B073ZLSMFT/ref=cm_sw_r_cp_api_3AG7BbCWZBJJ0)
[This](Comgrow Creality Ender 3 3D Printer Aluminum DIY with Resume Print 220x220x250mm https://www.amazon.com/dp/B07BR3F9N6/ref=cm_sw_r_cp_api_6CG7BbW9QA8GM) got amazing reviews when i was looking but it was too big for my apartment