Reddit reviews Rutland Products 76C 500-Degree RTV High Heat Silicone Seal, 10.3-Ounce Cartridge, Clear
We found 7 Reddit comments about Rutland Products 76C 500-Degree RTV High Heat Silicone Seal, 10.3-Ounce Cartridge, Clear. Here are the top ones, ranked by their Reddit score.
Rutland High Temperature Silicone is a great solution to your sealant and adhesive needsForms a tough and flexible sealWill adhere to most clean surfaces including: glass, metal, plastics, fiberglass, wood, brick, and stone.Seal fireplace inserts, repair solar panels, apply ceramic tiles to your fireplace surround or heat shielding behind your stove, the uses are endlessRated to withstand up to 500° F (260° C)
These pics are very helpful. So there are 19 holes for the ?? gallon bucket. I assume it is a 3 gallon inside the 5 gallon.
For the SCROG technique, I observed that you start the plant on the side. I've read that for LST you manipulate the plant around so it spirals around and ends in the center. From the looks of it you started this LST technique on the photo 9 but in photo 10 the plant began to veer off to the left and you began to take it counter clockwise. Attached are pics of what Im saying. In the end though, ideally you want a node per scrog square correct?
How many feet of LED strip do you recommend? I saw /u/bucketoflight design with 16.4 feet of LED is this overkill?
What are your thoughts on a thermostat like this?
How much did the grow cost you electricity wise?
What are your thoughts on using thermal resistant sealant to secure your LEDs to the side of your bucket? The cooler your LEDs are the better they preform. The resistant sealant makes LEDs act like a heat sink of their own instead of allowing the heat to accumulate in the plastic and mylar to which they are attached.
thanks
High temp gasket silicone
https://www.amazon.com/Rutland-Products-76C-500-Degree-10-3-Ounce/dp/B000DZBLNC
I just got this smoker as a birthday gift and I like it. I wanted a WSM 22 but this one came along for a cheaper price and went for it.
It's a decent smoker for the price. With that said, you will need to make some mods to it, this thing leaks all over. I bought this high heat silicone seal and sealed off gaps as I assembled it. This post has pictures showing where to apply the silicone. I suggest not applying it on the doors, use nomex high heat gasket tape instead. Another suggestion when sealing is to use a flashlight and flash from the inside out to search for potential leaks.
My first run didn't come out as expected. I was missing the gasket tape on the cooking chamber door so there was a huge leak all around the door. I couldn't get the temperature under 275. I fixed this issue and did my second run on sunday and it worked like a champ. I did a pork butt and I was able to maintain the temperature at 225-235 with little effort.
You may also want to invest in a good thermometer. The one that it brings it's off by about 10 degrees. Since it wasn't that big of a difference I didn't replace it and I just rely on a wireless maverick.
Last note, keep in mind the size of it. You have about a 14"x14" cooking area so you will not be able to fit a full rack of ribs unless you cut the tips off.
If you have any questions feel free to ask me and I'll answer them as best as I can. I'm new to this as well.
LMAO.
But for real, the foundation is the easy part. Look up local gardening centers, landscaping suppliers, stone yards, etc. to find stone. That looks like 3/8" pea gravel. If I had to guess, you need no more than 2 tons. Rule of thumb is that 1 ton covers 10x10ft 3 inches deep (find calculators online for better estimates).
Lay down landscaping fabric. Don't get the cheap stuff at Home Depot; get the quality woven stuff. Search for "geotextile fabric" on Amazon.
If you want a clean edge, go to Lowe's and get the Col-Met metal edging. They sell it in 8' lengths in black and it's relatively easy to install and gives a really, really clean edge. Pro-tip: use a reciprocating saw with a bi-metal blade to cut it for best results.
To get a perfect circle, place a stake at the center and tie a rope to it. Tie a spray can of marking paint to the other end and make yourself a perfect circle. Now trench it and add edging if you want that crisp look and low maintenance. Even though you already have a template to work from, I would still advise using this method of string and marking paint because it will be better to have a very well defined line to follow.
Get yourself a tamper or rent a compactor (if you're not in good shape and don't have good endurance, rent yourself a compactor). The dirt is probably already highly compacted from the pool so you will just need to add the stone on top and compact. If you need to level, you get yourself 3/4" diameter PVC pipes and lay that in your gravel bed and use a flat edge to level across the pipes. Then remove and compact.
I built a similar firepit using a kit with recycled granite and it looks awesome: https://www.buddingco.com/Recycled-Granite-Fire-Pit-Kit-p/fs-fire-pit-36.htm
The one I got was off of Etsy: https://www.etsy.com/listing/201454403/custom-granite-fire-pit?ref=shop_home_feat_1 (and holy shit, it was only $175 when I bought mine!)
Use heat-resistant adhesive when attaching the granite pieces together. I used this one: https://www.amazon.com/Rutland-Products-76C-500-Degree-10-3-Ounce/dp/B000DZBLNC because it's clear and if I made mistakes or used too much, you wouldn't see it leak out.
Here is a picture of my backyard after I put in the Col-Met edging and before I installed the plants and removed the grass.
Seal it up well! Install a high heat gasket like this around both doors. Use high heat silicon to seal any joints. The key to working with an offset is to be able to completely control airflow. You can't do that if the thing isn't sealed well.
Make sure the smoker you buy is a good quality steel too. Ultra cheap offset smokers use very thin grade metal that won't properly hold or distribute heat.
I was buying bags of Kingsford smoking logs at Home Depot, but at $18 per cubic foot it was getting expensive. I sourced a firewood supplier in my area that sells hickory and bought a bunch of it for much cheaper. I'll probably still go to Home Depot for mesquite since I use it less often and it's impossible to find in New Jersey.
Just did this for a pellet stove insert in the same style house. The only thing I can recommend is to give it some time outside the box before you install it. I unwound mine and left it straightened out in my garage over night. You'll need a top cap for the liner to to attach to. Use some high temp silicone like this stuff to seal the cap against your flue.
http://www.amazon.com/Rutland-500-Degree-Silicone-10-3-Ounce-Cartridge/dp/B000DZBLNC
Here's what I used for sealant: Rutland 500-Degree RTV High Heat Silicone Seal, 10.3-Ounce Cartridge, Clear https://www.amazon.com/dp/B000DZBLNC/ref=cm_sw_r_cp_apap_PYr2F5RA211De
I'm out of town right now, but here's a pic I took last month:
http://imgur.com/SC2aXzG
I still have a little bit of leakage, but nowhere near as bad as it was. Just apply the sealant around the front opening and cover with wax paper. Shut the door tight and pull the wax paper off the next day. Did that test brisket that morning and had no flavor issues or anything. Did have to yank out the steam table pan, it had a hole in it. So I'm just using a foil pan for a water pan now. BTW if you want the grilling wok, I ordered mine from Amazon but I actually saw them at Stein Mart of all places a few weeks ago.